Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123


Home > NetMachinery Equipment Listings > Drilling, Tapping & Threading

Radial Drill Press

This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.

9" column x 3ft arm
Ad Number: 16051
Year: 1981 Make: IIkeda Model: RMS-9
Machine Type: Condition: Good Price: 3495.00 reduced
Description:
1981 Ikeda Rms-9 radial drill unit with 9" column 3ft arm. Travel Box table Spindle 4mt. Voltage 230/3

WORKING AREA OF BASE .......... 37" X 23"
SPINDLE SPEEDS ................ (9) 50 TO 1500 RPM
FEEDS ......................... (9) .003 TO .015 IPR
SPINDLE TRAVEL ................ 9"
TAPER IN SPINDLE .............. #4MT
DISTANCE SPINDLE TO BASE ...... 11-1/2" MINIMUM TO 43" MAXIMUM
DISTANCE SPINDLE TO COLUMN .... 11" MINIMUM TO 36" MAXIMUM
TRAVEL OF HEAD ON ARM ......... 25"
TRAVEL OF ARM ON COLUMN ....... 32"
POWER ELEVATION ............... YES
MOTOR ......................... 3 HORSEPOWER

DRILLING CAPACITY ( STEEL ) ------------------------ 1.5"
DRILLING CAPACITY ( CAST IRON ) ------------------- 2"
TAPPING CAPACITY ( STEEL ) -------------------------- 1"
TAPPING CAPACITY ( CAST IRON ) --------------------- 1.2"
CAPACITY BORING ( STEEL ) --------------------------- 3.2"
CAPACITY BORING ( CAST IRON ) --------------------- 4"
WORKING SURFACE OF BASE -------------------------- 37" X 23"
COLUMN DIAMETER ------------------------------------- 9"
SPINDLE TAPER ---------------------------------------- #4 MT
SPINDLE SPEEDS --------------------------------------- 50 - 1500 RPM
POWER DOWN FEED RATES -- ( 4 ) ------------------ .003 TO .015 IPR
MAIN DRIVE MOTOR ----------------------------------- 3 HP
ARM ELEVATING MOTOR ------------------------------ 1 HP

EQUIPPED WITH ---

BOX TABLE
COOLANT SYSTEM
JACOBS DRILL CHUCK