Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123


Home > NetMachinery Equipment Listings > Sheetmetal/Pipe/Tube Bending, Shaping, Punching, Ironworkers

Brakes Press: Hydraulic

This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.

50 ton x 8ft.
Ad Number: 15577
Year: 2012 Make: Holem Model: WC67Y 50/2500
Machine Type: Condition: Needs Work Price: sold
Description:
Hydraulic Press Brake nc/plc(go to)backgage controller
Make: Holem
Model: WC67Y-50/2500
Capacity: 50 Ton x 8ft.
Electrical: 460/3 phase
Year: 2012
power back gage
Nominal force(KN)500
Worktable length(mm)2500
Distance between holes(mm)1850
Depth of throat(mm)230
Slider travel(mm)100
Max open height(mm)320
Main power(Kw)5.5
Powered backgauge
equipped with multi groove bottom die

1. The whole machine is made by plate welded
stress and treated by vibration to remove
inner stress, to make sure long
time bending accuracy, rigidity and
stability.

2. Hydraulic system is controlled by double
cylinders, mechanical stopper, torsion bar
to realize synchronization, machine is
runningsmoothly and reliably.

3. Distance of back gauge and stroke of
slide is adjusted by electrical control and
fine-tuning manually, and digital display
device is adopted to make operation more
frequently.

4. Upper mold clamping system is equipped
with deflection compensation system

Note: As seen in photo of the electrical
area, a white wire was cut to foot pedal by mistake. This took the machine out of operation. An electrician should be able to correctly
reconnect wire easily and machine would be in good working order,bought a new unit