Round mild steel bar: 1"
|
Ad Number: 13401
|
|
Year: | Make: Diacro | Model: # 8
|
| Machine Type: | Condition: Good | Price: sold
|
Description:
Diarco Tubing Bender Model #8
Take a look, up for sale today is a very
clean
and
functioning Di Arco tubing bender.
Model #8
Serial DE -1297
MODEL 8 SET-UP:
For bending Solid Stock. Especially
suitable
for
bending eyebolts with
centered or off-centered eye bends in one
operation.
Bending Tooling for Model #8:
- Built Up Forming Nose - Forms wider
materials
with special high collars.
- Radius Block - For forming solid
materials
to
a
tight radius. Requires a
standard locking pin to hold material.
- Radius Collar - Forms solid stock to
larger
radii. Requires standard locking pin
to hold material.
- Forming Roller - Replaces forming nose
to
eliminate part marking.
- Radius Pins - Shoulder Radius Pin is
used
for
forming solid materials to a
larger radius. A quill radius pin is used
for
forming light material to a tight
radius. Both pins require a standard
locking
pin
to hold material in place.
Specifications:
Max Radius Cap: 24"
Max degree of bend: 360 degrees
Hydraulic Pressure: 1,200 psi
Motor: 3hp
Wiring (specify): 208, 230, 460v, 3ph,
60hz
Torque (4" cylinder): 3,500 ft.lbs.
Machine Weight: 1,150 lbs.
Space Requirements: 55" x 22" x 40"H
Material Capabilities:
Round mild steel bar: 1"
Steel Tubing - 16ga: 1.5" OD
Standard Iron Pipe: .1" IPS
Flat Steel Bar (easy way): .375" x 4"
Flat Steel Bar (hard way): .375" x 1"
Standard Equipment:
Angle control with 4 stops
Material length gauge
Electrical Equipment conforms to JIC
Electrical
Standards for general purpose
machine tools.
Hydraulic cylinder - with 4" bore produces
3,500
ft/lbs for higher capacity |
|
|
