Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123


Home > NetMachinery Equipment Listings > Gear Machinery

Gear Hobbers

This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.

Gleason 645 Hypoid Gear Generator
Ad Number: 16061
Year: Make: Gleason Model: 645
Machine Type: Condition: Good Price: 34995
Description:
Gleason Hypoid Gear Generator

Model 645

New 1979 - 1980

This machine was just removed from service. The
hoses, pipes / plumbing and electric's on the
coolant tank and chip conveyor were disconnected.
They were "bagged and tagged" In other words, they
were labeled so that they can be put back together
without the guess work.

Includes misc. change gears

Includes manuals and schematics

Wired for 440 volts, 3 phase

Machine is located in Bridgeport, CT 06607

The machine weight is approx. 58,000 lbs. A rigger
is required to load

Machine is sold as is where is as inspected

Below are catalog spec's. (To be verified by
inspection)

Outer Core: 14.22" , 14.05" , 14.88"
Spiral Angle: 29.75", 30 Deg, 35 Deg.
Cutter Diameter: 12", 16" , 18"
Extreme Ratio: 10:1
Root Angle Range: -8Deg. to 90Deg.
Maximum Radial Setting: 10.50"
Coarsest Pitch: 1.5 DP
Full Depth: 1.25"
Face Width Max.: 4.60"
Index Range: 5-80 Inclusive
Work Spindle :: Diameter of Taperhole at Large End
6"
Taper/Ft: 3/4"
Taper/Depth: 6"
Diameter of Hole thru Spindle: 5"
Cutter Diameter: 9", 12", 16", 18"
Work Head Setting: Offset Above Center 4 1/2"
Offset Below Center: 4 1/2"
Machine Center to Nose of Spindle: 23.5"
Speed/Feeds: Cutter 19-167RPM
Electrics: 460 Volts AC Motor and Controls
Weight: 55,000 Lbs.
Equipped With:
Feeds Infinite Variable from 7 Second Per Tooth

Coolant
Hydraulics
Chip Auger