knife grinder: 79" x 6.5" max
|
Ad Number: 14490
|
Year: 80's | Make: Arne/Consolidated | Model: KG-S
|
Machine Type: | Condition: Good | Price: sold
|
Description: Arne # KGS knife/blade grinder chuck size: 81" x 8" max grinding surface 79" x 6.5" semi-automatic with manual downfeed max blade length of blades to grind: 79" max width of blades ground: 5.5",can change wheel and get 6.5" width max thickness of part to be ground: 1" feed carriage speed: 12.5ft/min speed of grinding wheel: 1680rpm motor: 3/4 HP,1680rpm tilt table +- 45 degrees coolant pump mounted wheel dresser spindle uses a 6"ODx4"ID x 3-1/8" cup wheel type 2003,A9946,K9V have manual on PDF for review technical description: this machine was developed for precision grinding of cutting knives and other parts which can fit in the clamping area. machine has 3 motors: grinding wheel drive motor,1 for power carriage drive traversing and another for coolant motor.the grinding wheel is assembled directly onto tthe extended shaft of the wheel motorthats mounted to the traversing feed carriage.traversing of the feed carriage is automatic with the manual setting of the reversing stops,the drive transmission frpom the carriage feed motor by v belt to worm gear box,then to drive sprocket and roller chain.the grinding wheel is lowered to the knife(or part)to be ground in a vertical direction with a manual handwheel,the vernier scale is graduated into 0.025mm or 0.001" increments. The grinding angle is set in rference to horizontal 0deg indicator with a graduated degree scale on left side of machine also you can tilt motor/grinding wheel centerline by adjusting screw and bracket on top of carriage to profide a more hollow ground knife edge |
|