Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123


Home > NetMachinery Equipment Listings > Sawing Equipment

Cold Saws & Power Hack Saws

This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.

non ferrous:14” Blade Capacity (305mm) 2-1/2” (63mm) High x 7”
Ad Number: 15850
Year: 2016 Make: CTD Model: M25RHC
Machine Type: Condition: Good Price: sold
Description:
CTD M25RHC-non ferrous circular saw
Floor Stand
Vertical Air Clamp
Horizontal Air Clamp
Mitre cut-off saw
*Blade Capacity: 14"
blade speed:rpm:3725
*3 H.P. 3 phase or 2 H.P. 1 phase * 3450 RPM
*Mitres up to 60°*
*Cutting Capacity:
45°: 4 1/2" X 7"
90°: 4 1/2" X 9"


Bio-Lube Lubrication System Automatic Valve
14” DF Carbide Blade for Alum

M25R/45° Mitre: Maximum Cutting Capacity 90°
Straight Cut:
12” Blade Capacity (305mm) 2-1/2” (63mm) High x 7”
(178mm) Wide
2-1/2” (64mm) High x 4-1/4” (108mm) Wide 4” (101mm)
High x 4” (101mm) Wide
3-1/2” (89mm) High x 4” (101mm) Wide 45° Mitre:
3-1/4” (82mm) High x 5” (127mm) Wide
Cutting Capacity with fences set at centerline: 3-1/2”
(89mm) High x 3-1/2’ (89mm) Wide
45° Mitre: 2-1/2”(64mm) High x 3-1/2”(89mm) Wide 90°
Front to Back/45° Compound:
90° Cutting: 2-1/2”(64mm) High x 5”(127mm) Wide 1-
1/2” (38mm) High x 5-1/2” (140mm) Wide
1” (25mm) High x 7” (178mm) Wide
M25R & F255R/90° Cutting:
12” Blade Capacity (305mm)
2-1/2” (64mm) High x 7-1/2” (191mm)
3-3/4” (95mm) High x 3-3/4” (95mm)Wide
note: see ad 15851..measuring system were used together