Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123


Home > NetMachinery Equipment Listings > Sawing Equipment

Plate Saws

This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.

stone cutter: saw: bridge cutting saw
Ad Number: 15165
Year: 10/2012 Make: Shengda Model: XZQQ-625
Machine Type: Condition: Good Price: sold
Description:
Shengda #XZQQ-625 Stone cutting saw
0-45 deg tilt blade blade
80" x 126" wood table
190" total width between housings
blade dia: 625mm or 24"
head travel in /out on side rails:140"
rpm: 2085
tilting table
wired 220/3 currently
factory specs below:
Bridge cutting machine:
XZQQ-625
Max.working dimensions(LxWxH) Mm
3200x3200x200
Max.diameter of blade Mm 625
Table dimensions(LxW) Mm 3200x2000
Table tilting degree No 0-85
Table rotating degeree No 360
Head tilting degree no 0-45
Main motor power Kw 15
Overall dimensions(LxWxH) mm
6000x5000x2600

This machine is PLC controlled with
cutting
dimensions set by terminal input. All
operation
are executed either manually by the
operator or
automatically by the program carrying out
parallel cuts with max 8 different
dimensions
repeatable up to 1999 times. The
switchboard,
with operation buttons, programmer and
liquid
crystal display on it, is mounted on the
right
hand side of the machine. The switchboard
make
operator easily to control the machine
from the
sawing area when the stone is being
positioned.
The saw is equipped with a laser
illumination
system to aid in lining up the cut. The
most
important is the blade holder of machine
can be
tilting from 0 to 45 degree for chamfering
cutting. So the machine can be satisfy for
different special processing request. The
cut
is controlled through an inverter.