This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.
Heavy Duty Turret Lathe
Ad Number: 4325
Year: 67?
Make: Gisholt
Model: 2-L/13W-9137
Machine Type:
Condition: Good
Price: sold
Description: Swing: 24" Distance Between centers: 60" Spindle Bore: 4.25" 4 way toolpost notes:below air gap and a chuck at 22” and 24” diameters. The 22” clears the ways and the 24” would hit the ways. It also shows the dimension from center of the chuck to a level point across the ways. Dimensions:
The total distance outside the ways is 17” (his was 15”). The operator side way is 4 ½” across. The opposite side way is 3” across. The ‘air’ between the ways is 9 ½” (his was 7 ½”). The ways are 1 ¼” thick.
The center of the chuck to level across the ways is 11”. The swing is debatable… 22” definitely clears the ways. A circle drawn at chuck center point could be a little less than 24” before touching the ways considering the ‘air gap’ is also on center.
Voltage:
575 3 phase… The drive motor, rapid traverse motor and coolant pump most likely can be rewound for 230/460. There is a small multi-tap control transformer inside the control cabinet. It is wired for 575 but has the connections for 230 and 460 as well.
Condition:
I don’t know if it runs. The headstock and rapid traverse oil site gauges show ‘middle’ of the sight glass bulls eye.
Manual etc.
I have a manual and what looks to be a complete electrical print.
Other stuff: It has a ‘chuck’ switch and ‘inch’ switch. This is used on our other Gisholts to maneuver the chuck so as to insert the chuck wrench. loading fee: $ 800.00