Home   |   Contact Us   |   About Us   |   Tel: 704-660-8130


Home > NetMachinery Equipment Listings > Manual Lathes

General Purpose Lathe 15in. to 23in. swing

This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.

16" swing x 40" centers
Ad Number: 14855
Year: 2008 Make: Knuth Model: DM1000A
Machine Type: Condition: Good Price: sold
Description:
2008 Knuth # DM1000A Manual Lathe
chuck: 10" 3 jaw & 12.5" 4 jaw
DRO:Newall 2 axis
spindle bore: 2-1/8"
includes: face plate,follow rest
toolpost w/4 holders
motor: 7.5 HP
Std MFg specs below:

M 1000 A Lathe with 2 axis Digital Read Out positioning system

• Large 2” spindle capacity
• Powerful 7.5Hp motor, 220V, 3ph, 60Hz
• Complete accessory set
• Adjustable slip clutch eliminates tooth breakage caused by overload conditions
• Foot brake for instant spindle stopping and shut off
• Chuck guard with shut-off interlock (spindle will not operate unless closed)
• Hardened and ground gears and shafts
• Heavy-duty, large-sized bed, hardened and precision ground
• Slide guide way adjustable through taper gibs
• Gapped bed with bridge
• Rear main spindle supported on tapered roller bearings and thrust bearings
• Forward main spindle supported on double-row cylindrical roller bearings
• Headstock runs in oil-bath
• ASA D1-6 Camlock mount
• Feed drive gears and apron run in oil-bath

Standard equipment:
• Position indicator
• 3-jaw chuck Ø 10”
• 4-jaw face plate chuck Ø 12.6”
• Face plate Ø 20”
• 4-station tool holder
• Coolant system
• Steady and follow rests
• Splatter guard
• Chuck guard
• Foot brake pedal
• Halogen work lamp
• Reducing sleeve
• 2 steady centers
• Operating tools

Optional Equipment:

• 5pc Quick Change Tool Holder set “WB” Article #103195

Specifications DM 1000 A:
Max. Turning diameter over bed: 16"
Max. Turning diameter over slide: 9.5"
Max. Turning diameter in gap: 23"Gap length:8"
Max. Turning length: 40"
Spindle Bore: 2"
Spindle taper: MT 6
Spindle mount: Camlock ASA D1-6
Spindle speeds (12 increments): 30 - 1600 rpm
Feeds: 115 total
- Longitudinal: 0.0015-0.041"
- Transversal: 0.0007-0.021"
Thread: Metric: (30 pitches) 0.45 - 20 mm
- Witworth inch: (35 pitches) 80 - 1 3/4 tpi
- Module: (25 pitches) 0.25 - 10 mm
- Diametrical: (30 pitches) 160 - 3 1/2 DP
Travels:
- Compound: 5.5"
- Cross slide: 9.4"
Tailstock quill: 5" travel
Tailstock quill taper: MT 4
Compound slide swivel range: ± 45°
Tailstock lateral adjustment range: ± 0.4"
Square tool shank: ¾” x ¾”
Dimensions (L x W x H): 86”x38”x51”
Weight: 3,200 Lbs
UL approval inspection sticker on side ,nice lathe was over 13K new!

Tel.: 704-660-8130     
e-mail: sales@netmachinery.com
Copyright © NetMachinery
Home   |   Log In  |  About Us  |  Contact Us  |  Site Map  |  Terms of Use  |  Html Index  |  Sold Archive  |  Leasing
Place Free Ad  |  View Machinery  |  Hot Deals  |  Inventory Specials  |  Industrial Services  |  Wanted Equipment |  New Machines