User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1997 Make - CLAUSING/METOSA Model - Metosa EL1765CS |
---|
FOR SALE: Ad # 5837 , Year = 1997 , Make = CLAUSING/METOSA , Model = Metosa EL1765CS |
|
Category: Combination (teach lathe) CNC / Manual
|
Capacity: 17.5" x 65" Clausing Gap Bed CNC Teach Lathe
|
Ad #
5837 |
Year:
| 1997
|
Make:
| CLAUSING/METOSA
|
Model:
| Metosa EL1765CS
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Swing Over Ways 17-11/16"
Swing Over Carriage Wing 16-1/8" Swing Over Cross Slide 10-1/8" Swing in Gap 25-1/2" Distance Between Centers 65" Spindle Hole 2-1/32" Spindle Motor 10 H.P., 460 Volt 3 Phase Spindle Speeds 0 to 2300 RPM Infinitely Variable Spindle Nose D1-6 Tailstock Taper MT4 Feed Rates 0 to 118 IPM Rapid Rate 200 IPM Equipped With Fagor 800 TGI CNC Control with Conversation & Teach Functions 8 Position Manual Turret Collet Nose w/ Power Draw Tube (20) Collets Electric Hand Wheels Constant Surface Speed Control All Styles of Threading without Change Gears
|
Electrical Description |
|
Comments: |
- Machine can be Run by CNC or Manually
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 2000 Make - Victor Model - JF-2VS |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5839 , Year = 2000 , Make = Victor , Model = JF-2VS |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 49" Victor Universal Vertical Ram Style Turret Mill
|
Ad #
5839 |
Year:
| 2000
|
Make:
| Victor
|
Model:
| JF-2VS
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Table Size 9" x 49"
Table Travels: X-Axis: 35" Y-Axis: 12" Vertical Travel (Knee) 16" Quill Travel 5" Spindle Speeds 60 to 4200 RPM, Variable Head Spindle Taper R8 Spindle Motor 3 H.P., 220 Volt 3 Phase
Equipped With: Hardened & Ground Table Way Covers Work Light One Shot Lube
|
Electrical Description |
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1966 Make - Bridgeport Model - Series J |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5838 , Year = 1966 , Make = Bridgeport , Model = Series J |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 42" Bridgeport Series J With Power Downfeed
|
Ad #
5838 |
Year:
| 1966
|
Make:
| Bridgeport
|
Model:
| Series J
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Table Size 9" x 42"
Table Travels: X-Axis: 30" Y-Axis: 12" Vertical Travel (Knee) 16" Quill Travel 5" Spindle Feed 0.0015, 0.003" & 0.006" /REV Spindle Speeds 80 to 2720 Step Pully Head Spindle Taper R8 Spindle Motor 1 H.P., 208/230/460 Volt 3 Phase
Equipped With: Bridgeport Vise New Brass Table Nuts Power Down Feed
|
Electrical Description |
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1973 Make - DoAll Model - TF-1421 |
---|
FOR SALE: Ad # 5847 , Year = 1973 , Make = DoAll , Model = TF-1421 |
|
Category: Vertical Band Saws
|
Capacity: 14" x 21" DoAll Medium Duty Tilt-Frame Band Saw
|
Ad #
5847 |
Year:
| 1973
|
Make:
| DoAll
|
Model:
| TF-1421
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 2,500 Lbs.
|
Dimension: L x W x H | 88" x 56" |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Maximum Cut 14" x 21" @ 90°
14" x 14" @ 45° Blade Size 1" x 171" Blade Speeds Variable 105 to 275 FPM Hydraulic Drive 1.5 H.P., 208/230V 3Ph Maximum Table Load 1,000 Lbs. Equipped With: Hydraulic Blade Head Feed Hydraulic Vise Clamping Hydraulic Blade Drive Coolant Pan & Pump
|
Electrical Description |
|
Comments: |
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1966 Make - Tannewitz Model - GVTNE |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5846 , Year = 1966 , Make = Tannewitz , Model = GVTNE |
|
Category: Vertical Band Saws
|
Capacity: 35-1/2" Tannewitz Vertical Band Saw
|
Ad #
5846 |
Year:
| 1966
|
Make:
| Tannewitz
|
Model:
| GVTNE
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 4,000 lbs
|
Dimension: L x W x H | 42" x 95" |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Capacity 35-1/2" Throat
Distance Under Throat 16-1/4" Table Size 31" x 41" Working Surface 36" x 46" Overall (w/ Coolant Trough) Blade Size Up to 1-1/4" x 244" Blade Speeds 55 to 11,000 FPM (3-Speed Gear Box and Vari-Speed Drive) Motor 15 H.P. 208/220/440Volt 3 Phase Wheel Diameter 36" Table Tilt 45° Table Stroke 16½" Equipped With: Hydraulically Fed Table Adjustable Table Feed Pressure Coolant Electro-Hydraulic Blade Brake Integrated Reeves Vari-Speed Drive
|
Electrical Description |
|
Comments: |
- This Saw Can Do Contour Sawing, Straight Cutting, Friction Sawing or Band Machining (with Diamond/Tungsten Blades)
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 1978 Make - Timesaver Model - TB352M |
---|
FOR SALE: Ad # 5855 , Year = 1978 , Make = Timesaver , Model = TB352M |
|
Category: Belt & Disc Grinders
|
Capacity: 52" Wide Timesaver Single Head, Conveyorized Belt Grinder/Sander
|
Ad #
5855 |
Year:
| 1978
|
Make:
| Timesaver
|
Model:
| TB352M
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Capacity 52" Wide
Maximum Under Grinding Belt 6", Manually Adjusted Grinding Motor 30 H.P., 230/460V 3 Ph Conveyor Belt Motor 2 H.P., 230/460V 3 Ph Air Tracking Conveyor Gears for adding Additional Conveyor Extensions, Not Included
|
Electrical Description |
|
Comments: |
- Equipped With New Rubber Conveyor Belt & Contact Roll.
The Part, placed on a moving conveyor, passes through the machine under a spinning abrasive belt. Machine can be used on metals or wood parts.
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1985 Make - SUPERTEC Model - STC-20 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5829 , Year = 1985 , Make = SUPERTEC , Model = STC-20 |
|
Category: Centerless Grinders
|
Capacity: Supertec STC-20, 20" Centerless Grinder
|
Ad #
5829 |
Year:
| 1985
|
Make:
| SUPERTEC
|
Model:
| STC-20
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 7,280 lbs
|
Dimension: L x W x H | 78" x 71" |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Capacity:
0.040 to 2.0" (1 to 50mm) w/ Standard Work Rest 2.0 to 4.0" (50 to 100mm) w/ Special Work Rest Grinding Wheel Size 20" x 8", 12" Hole Grinding Wheel Motor 20 H.P. Grinding Wheel Speed 1070 RPM Grinding Wheel Dressing: 0.0005" Per Graduation 0.0625" Per Revolution Regulating Wheel Size 12" x 8", 5" Hole Regulating Wheel Adjustment: Swivel & Tilt +/- 5° Regulating Wheel Speed: 15 to 308 RPM (10 Speeds) Regulating Wheel Motion: 0.002" Per Graduation 0.2" Per Revolution Regulating Wheel Dressing: 0.0005" Per Graduation 0.0625" Per Revolution Rapid Feed of Saddle Handwheel: 0.002" Per Graduation 0.25" Per Revolution Micro Feed of Saddle Handwheel: 0.00005" Per Graduation 0.00625" Per Revolution Equipped With: Hydraulic Dressing Automatic Lubrication Thru Feed Work Rest Coolant System 2 H.P. Hydraulic Motor
|
Comments: |
- New Replacement Cost Today is $43,000.00
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1990 Make - Supertec Model - STC-12 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5828 , Year = 1990 , Make = Supertec , Model = STC-12 |
|
Category: Centerless Grinders
|
Capacity: Supertec Centerless Grinder
|
Ad #
5828 |
Year:
| 1990
|
Make:
| Supertec
|
Model:
| STC-12
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 2,640 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Capacity:
0.040 to 1.18" (1 to 30mm) w/ Standard Work Rest 1.18 to 2.0" (30 to 50mm) w/ Special Work Rest Grinding Wheel Size 12" x 6", 5" Hole Grinding Wheel Motor 5 H.P. Grinding Wheel Speed 1900 RPM Grinding Wheel Dressing: 0.0005" Per Graduation 0.05" Per Revolution Regulating Wheel Size 8" x 6", 3.5" Hole Regulating Wheel Adjustment: Swivel & Tilt +/- 5° Regulating Wheel Speed: 15 to 310 RPM (10 Speeds) Regulating Wheel Motion: 0.002" Per Graduation 0.2" Per Revolution Regulating Wheel Dressing: 0.0005" Per Graduation 0.05" Per Revolution Rapid Feed of Saddle Handwheel: 0.00125" Per Grad. 0.25" Per Revolution Micro Feed of Saddle Handwheel: 0.00005" Per Graduation 0.01" Per Revolution Floorspace 56" x 53" Weight 2640 Lbs. Equipped With: Hydraulic Dressing One Shot Lubrication Coolant System 1 H.P. Hydraulic Motor
|
Comments: |
- New Replacement Cost Today is $21,500.00
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1987 Make - Chevalier Model - FSG1228AD |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5830 , Year = 1987 , Make = Chevalier , Model = FSG1228AD |
|
Category: Surface Grinders
|
Capacity: Chevalier 12" x 28" Automatic Hydraulic Surface Grinder
|
Ad #
5830 |
Year:
| 1987
|
Make:
| Chevalier
|
Model:
| FSG1228AD
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 5,069 lbs
|
Dimension: L x W x H | 118"x 59"x 76" |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Chevalier Surface Grinder (3110)
Chuck Size 11¾" x 27-9/16" (Electromagnetic) Spindle Motor 5 H.P. Wheel Size 14" x 2", 5" Hole Travels: X-Axis: 29½" Hydraulic, 31½" Manual Y-Axis: 12" Hydraulic, 13¾" Manual Maximum Distance from Table to Spindle Center 24¾" Table Speeds 16 to 82 FPM, Variable Handwheel Per Revolution .25" Handwheel Per Graduation .0025" Micro Feed Per Revolution .005" Micro Feed Per Graduation .00005" Wheelhead Vertical Infeed .00005" to .002" Automatic
Equipped With: Powered Longitudinal & Cross Feeds Powered Vertical Travel with Incremental Downfeed Coolant Tank with paper Filter
|
Comments: |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - DIACRO Model - 16-72 |
---|
FOR SALE: Ad # 5827 , Year = , Make = DIACRO , Model = 16-72 |
|
Category: Press Brakes (Hydraulic)
|
Capacity: 72" x 16 Ga. 25 Ton Diacro Hydra-Mechanical Press Brake
|
Ad #
5827 |
Year:
|
|
Make:
| DIACRO
|
Model:
| 16-72
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 5,000 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- LENGTH OF BED 72”
CLEARANCE BETWEEN HOUSING 62” CAPACITY MILD STEEL 16 GA STROKE OF RAM 2” RAM ADJUSTMENT 3” SHUT HEIGHT 9” DIE HOLDER HEIGHT 3” THROAT CLEARANCE 9”
EQUIPPED WITH: NEW SEALS IN HYDRAULICS NEW BEARINGS POWER RAM ADJUSTMENT FRONT OPERATED MANUAL BACK GAUGE STROKE ADJUSTMENT NEW PAINT
|
Comments: |
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1985 Make - Tauring Model - Vega 50NC9V |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5850 , Year = 1985 , Make = Tauring , Model = Vega 50NC9V |
|
Category: Angle Bending Rolls
|
Capacity: Programmable Angle Bending Roll & Ring Roller
|
Ad #
5850 |
Year:
| 1985
|
Make:
| Tauring
|
Model:
| Vega 50NC9V
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Capacities: (mm/Inch)
Angles 20mm x 30mm x 3mm @ 200mm Radius / .79"x 1.18"x .12" @ 7.87" 50mm x 50mm x 5mm @ 300mm Radius / 1.97"x 1.97"x .2" @ 11.81" 60mm x 60mm x 5mm @ 500mm Radius / 2.36"x 2.36"x .2" @ 19.69"
Flats 30mm x 10mm x @ 150mm Radius / 1.18"x .39" @ 5.91" 50mm x 15mm x @ 250mm Radius / 1.97"x .59" @ 9.84" 70mm x 10mm x @ 400mm Radius / 2.76"x .39" @ 15.75"
Tube: 20mm @ 150mm Radius / .79" @ 5.91" 35mm @ 200mm Radius / 1.38" @ 7.87" 40mm @ 300mm Radius / 1.57" @ 11.81"
Channel: 30mm x 15mm x 4mm @ 300mm Radius / 1.18"x .59"x .16" @ 11.81" 50mm x 25mm x 5mm @ 300mm Radius / 1.97"x .98"x .2" @ 11.81" 50mm x 30mm x 6mm @ 1200mm Radius / 1.97"x 1.18"x .24" @ 47.24" Main Motor 3.2KW / 4.29 H.P. 220Volt 3 Phase
Equipped With: Large Tooling Assortment for Angles Control Pedestal One Shot Lube
|
Electrical Description |
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Hendley Whitmore Model - 20 Gauge x 98in |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5844 , Year = , Make = Hendley Whitmore , Model = 20 Gauge x 98in |
|
Category: Initial Pinch & Pyramid Type Plate Bending Rolls
|
Capacity: 20 Gauge x 98" Initial Pinch Plate Rolls
|
Ad #
5844 |
Year:
|
|
Make:
| Hendley Whitmore
|
Model:
| 20 Gauge x 98in
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Capacity 20 Gauge x 98" Mild Steel
Roll Diameter 3½" Power Required 208/220/440 Volt, 3 Phase Equipped With: Manual Drop End Manual Adjustment Reverse and Forward Control Foot Pedal
|
Electrical Description |
- 208/220/440 Volt, 3 Phase
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1996 Make - Euromac Model - Model XP 950/30/1250 CNC |
---|
FOR SALE: Ad # 5843 , Year = 1996 , Make = Euromac , Model = Model XP 950/30/1250 CNC |
|
Category: Single Station Punches-CNC
|
Capacity: 30 Ton Euromac Hydraulic CNC Single Station Punch System
|
Ad #
5843 |
Year:
| 1996
|
Make:
| Euromac
|
Model:
| Model XP 950/30/1250 CNC
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Tonnage 30 Tons
Maximum Hole Size 3½" Maximum Stroke 1.18" (Adjustable) Throat 37.49" X-Axis Travel 49.21" Y-Axis Travel 29.52" Table Size 51.18" x 99.2"
Equipped With: Euromac User Friindly CNC Control Graphical Interface Pendant with Large CRT Automatic Sheet Clamping "L" Bracket for small parts work Hydraulic Tool Locking Programmable Stroke
|
Comments: |
- Amada Style, Thick Tooling (4 Sets Included)
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1998 Make - W.A. Whitney Model - Model 2330 Series 2000 |
---|
FOR SALE: Ad # 5842 , Year = 1998 , Make = W.A. Whitney , Model = Model 2330 Series 2000 |
|
Category: Single Station Punches-CNC
|
Capacity: 30 Ton Whitney Hydraulic CNC Single End Fabricator
|
Ad #
5842 |
Year:
| 1998
|
Make:
| W.A. Whitney
|
Model:
| Model 2330 Series 2000
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 8,000 lbs
|
Dimension: L x W x H | 171" x 85" |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Tonnage 30 Tons
Maximum Hole Size 5" in 10 Gauge 1" in ½" Plate Throat 36" Punch Stroke 3/8" to 2" Punch Speed 60 SPM on 1" Centers Positioning Speed 600 IPM Positioning Accuracy +/- .005" X-Axis Travel 120" Y-Axis Travel 30" Table Size 51.18" x 99.2" Hydraulic Pump 10 H.P., 230/460V (Currently wired 460) Equipped With: WA Whitney Panel gage 2E CNC Control w/ Touch Screen Monitor Dual Foot Pedals Dual Non-Contact Palm Buttons Pneumatic Die Clamping Ball Table
|
Electrical Description |
|
Comments: |
- Large Assortment of Toooling 28XX
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1989 Make - PINES Model - # 2 |
---|
FOR SALE: Ad # 5826 , Year = 1989 , Make = PINES , Model = # 2 |
|
Category: Benders-Pipe and Tube
|
Capacity: Pines # 2 Hydraulic Tube Bender with Mandrell Extractor
|
Ad #
5826 |
Year:
| 1989
|
Make:
| PINES
|
Model:
| # 2
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 4,600 lbs
|
Dimension: L x W x H | 147" Long |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Counter Clockwise Swing Arm Rotation,
Left Hand Radius Capacity 12" Maximum Bend Angle 180°+ Overbend for Springback Material Capacities: 3" x .109" (Mild Steel) 3" x .065" (Stainless Steel) 3" x .188" (Non-Ferrous) 2" x Schedule 80 Steel Pipe 2½" x .083" Square Tubing 1-7/8" Round Bar 1-11/16" Square Bar Bending Speed 6 RPM Bending Accuracy +/- 1/4° Motor 10 H.P., 230/460 Volts, 3 Phase Equipped with: Pines Turret Stop Control Pressure Die Assist Cylinder Hydraulic Mandrel Extractor Pedistal Operator Control Some Round Tube Tooling Operators Manual
|
Electrical Description |
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1965 Make - PINES Model - # 1-1/4 |
---|
FOR SALE: Ad # 5825 , Year = 1965 , Make = PINES , Model = # 1-1/4 |
|
Category: Benders-Pipe and Tube
|
Capacity: Pines #1 Hydraulic Tube Bender with Mandrell Extractor
|
Ad #
5825 |
Year:
| 1965
|
Make:
| PINES
|
Model:
| # 1-1/4
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 4,600 lbs
|
Dimension: L x W x H | 147" Long |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Radius Capacity 12"
Maximum Bend Angle 180°+ Overbend for Springback Material Capacities: 2½" x .065 (Mild Steel) 1¾" x .065 (Stainless Steel) 3" x .065 (Non-Ferrous) 1¼ Steel Pipe 1¾" x .065 Square Tubing 1-3/8" Round Bar 1-1/8" Square Bar Equipped with: Pines Turret Stop Control Pressure Die Assist Cylinder Hydraulic Mandrel Extractor Pedistal Operator Control
|
Electrical Description |
|
Comments: |
- Includes Some Round Tube Tooling
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1993 Make - Geka Model - 70-S |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5832 , Year = 1993 , Make = Geka , Model = 70-S |
|
Category: Ironworkers
|
Capacity: 77 Ton Geka Hydraulic Ironworker
|
Ad #
5832 |
Year:
| 1993
|
Make:
| Geka
|
Model:
| 70-S
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3,520 lbs
|
Dimension: L x W x H | 60"x 34"x 70" High w/o Ga Bar |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Capacity 77 Tons
Shear Capacities: Maximum Flats: 18"x 5/8", 12"x 3/4" or 10"x 1" Maximum Angles: 5"x 5"x 1/2" Rod: 1-3/4" Throat Depth 12" Stroke Speed 48 SPM (at 3/4" Travel) Motor 12 H.P., 230/460V 3 Ph Equipped With: Built-in Notcher, Punch, Angle, Bar & Plate Shear Automatic Cut Gauge Bar Punch Table w/ Back Stop (2) Electric Foot Pedals, for Simultaneous, Independant Operation (46) Punch Sets w/ Rack Worklight
|
Electrical Description |
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1982 Make - Aronson Model - HD-500 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5853 , Year = 1982 , Make = Aronson , Model = HD-500 |
|
Category: Welding Positioners
|
Capacity: 50,000 Lb. 84" x 84" Heavy Duty Welding Positioner
|
Ad #
5853 |
Year:
| 1982
|
Make:
| Aronson
|
Model:
| HD-500
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 15,200 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Pennsylvania
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Capacity 50,000 lbs (at 12" Center of Gravity
Table Dimensions 84" x 84" Square Table Tilt 135° Powered Hole in Table 14" T-Slots in Table 4 Rotational Speed .5 to .008 RPM Maximum Tilting Torque 1,050,000 Ft/Lbs. Maximum Rotational Torque 600,000 Ft/Lbs. Adjustment Table Heights 71", 83", 95", 107" & 119" Inherent Overhang 8&Frac34;" Weight 15,200 Lbs. Dimensions 122"L x 124"W x 82"H Equipped with Hand Held Pendant Control 360 Degree Variable Speed Power Rotation Tilt (Brake) Motor Complete Electrical Controls
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1952 Make - Cullen Friedstedt Model - 300 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5852 , Year = 1952 , Make = Cullen Friedstedt , Model = 300 |
|
Category: Welding Positioners
|
Capacity: 20 Ton 84" x 84" Welding Positioner
|
Ad #
5852 |
Year:
| 1952
|
Make:
| Cullen Friedstedt
|
Model:
| 300
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 32,400 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Capacity 40,000 lbs
Table Dimensions (Overall) Width x Length 84" x 84" Table Capacity at 12" Eccentricity 40,000 lbs Table Capacity at 24" Eccentricity 30,000 lbs Table Capacity at 30" Eccentricity 27,000 lbs Table Capacity at 36" Eccentricity 25,000 lbs Table Capacity at 42" Eccentricity 23,000 lbs Table Capacity at 48" Eccentricity 21,000 lbs Table Capacity at 54" Eccentricity 19,000 lbs Table Rotation Speed, Variable 0 to 0.25 RPM Table Rotation Motor, HP/RPM 10 HP/1177 RPM Table Tilt Motor 25 HP/1670 RPM Weight Approximately 32,400 lbs Equipped with Hand Held Pendant Control 360 Degree Variable Speed Power Rotation 84" x 84" T-Slotted Square Table Manual Adjustable Table Elevation
|
Comments: |
- Taken from Government storage in 1994
Condition Excellent
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - Make - THERMAL EQUIPMENT Model - 36 x 92 HYDROCLAVE |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5823 , Year = , Make = THERMAL EQUIPMENT , Model = 36 x 92 HYDROCLAVE |
|
Category: Autoclaves / Sterilizing Chambers
|
Capacity: THERMAL EQUIPMENT Hydroclave, 36" Diameter x 192" Long, 3000 PSI Water
|
Ad #
5823 |
Year:
|
|
Make:
| THERMAL EQUIPMENT
|
Model:
| 36 x 92 HYDROCLAVE
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- THERMAL EQUIPMENT Hydroclave, 36" Diameter x 192" Long, 3000 PSI Water Pressure
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1989 Make - Thermal Equipment Model - Thermal Equipment 19 x 39 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5822 , Year = 1989 , Make = Thermal Equipment , Model = Thermal Equipment 19 x 39 |
|
Category: Autoclaves / Sterilizing Chambers
|
Capacity: 18¾" Diameter x 39" Long Composite Bonding Autoclave
|
Ad #
5822 |
Year:
| 1989
|
Make:
| Thermal Equipment
|
Model:
| Thermal Equipment 19 x 39
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | 108" x 72" x 96" High |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- National Board# 204, Job# 8942,
Inside Dimensions 18¾" Diameter x 39" Long Maximum Capacity 13" x 13" x 36" Maximum Pressure 325 PSI @ 650°F Working Capacity 315 PSI @ 800°F Shell Thickness 3/8" Overall Dimensions 108" x 72" x 96" High Equipped with: Electric Heating w/ Fan Water Cooled (No cooling tower supplied) HP386 Computer w/ Printer Chart Recorder Vacuum Pump (4) Sensor Ports Hinged, Bolt Up Door
|
Electrical Description |
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1996 Make - Gruenberg Ind. Model - Checkmaster T65H960 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5840 , Year = 1996 , Make = Gruenberg Ind. , Model = Checkmaster T65H960 |
|
Category: Batch Oven
|
Capacity: 96 cf Gruenberg Electric Class A Solvent Venting Industrial Truck Oven
|
Ad #
5840 |
Year:
| 1996
|
Make:
| Gruenberg Ind.
|
Model:
| Checkmaster T65H960
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 3,000 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Interior Dimensions 48" x 48" x 72" High
Interior Volumn 96 Cubic Feet Maximum Temperature 650°F Airflow 5500 CFM Horizontal Power Consumption 36 KW Electrical 440 Volt 3 Phase Insulation 4" LOW Equipped with: Honeywell Chart Recorder Honeywell Programmable Control Double Doors Truck with Shelves Heavy Duty, Fluuyy-Welded, Structural Steel Frame Removable Side & Back Walls for Easy Cleaning - (2) Identical Machines Available
|
Electrical Description |
|
Comments: |
- Replacement Costs Today - $52,000
These ovens are ideally suited for powder coating, drum heating, aging, core hardening, drying, preheating, curing, component testing. And, with additional options, they can also be used for applications such as paint baking, plastic curing, varnish baking, sterilizing, and rubber and epoxy curing.
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 2001 Make - WHEELABRATOR Model - 48 x 96 Pass Thru |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5851 , Year = 2001 , Make = WHEELABRATOR , Model = 48 x 96 Pass Thru |
|
Category: Bead & Shot Blasters
|
Capacity: WHEELBRATOR Pass-Thru Shot Blaster, 48" x 96" Opening
|
Ad #
5851 |
Year:
| 2001
|
Make:
| WHEELABRATOR
|
Model:
| 48 x 96 Pass Thru
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- WHEELBRATOR Pass-Thru Shot Blaster, 48" x 96" Opening, (8)15 H.p. Wheels,
|
Comments: |
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|