User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 1988 Make - MAZAK Model - 35-ATC |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5907 , Year = 1988 , Make = MAZAK , Model = 35-ATC |
|
Category: Turning Center 11 in. & over chuck
|
Capacity: MAZAK Slant Turn 35-ATC M/C CNC Turning / Milling Center
|
Ad #
5907 |
Year:
| 1988
|
Make:
| MAZAK
|
Model:
| 35-ATC
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 9,680 Lbs.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Pennsylvania
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- MAZAK Slant Turn 35-ATC M/C CNC Turning / Milling Center
Equipped With C-Axis, Live Milling, & ATC Swing Over Bed 18.1" Swing Over Cross Slide 12" Maximum Turning Diameter 11.8" Distance Between Centers 39.37" Spindle Bore Diameter 3.15" Spindle Speed Range 12 - 3000 RPM Spindle Nose A2-8 Main Spindle Motor 30 HP / 25 HP Rotary Spindle Drive 5 HP Rotary Spindle Speeds 2000 RPM Z-Axis Travel 40.47"
EQUIPPED WITH:
C-Axis Spindle Indexing 12" 3-Jaw Hydraulic Chuck Tailstock Automatic Chip Conveyor Mazatrol CAM T-3 CNC Control Door Interlock Assorted Tool holders 16 Station Automatic Tool changer
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1997 Make - HYUNDAI Model - HIT-18S |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5910 , Year = 1997 , Make = HYUNDAI , Model = HIT-18S |
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: HIT-18S HYUNDAI 2-axes Slant bed CNC turning center
|
Ad #
5910 |
Year:
| 1997
|
Make:
| HYUNDAI
|
Model:
| HIT-18S
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 9,800 lbs.
|
Dimension: L x W x H | 101.1" x 64.2" x 72" |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- HIT-18S HYUNDAI 2-axes Slant bed CNC turning center
Max. swing over bed 17.3 Max. cutting diameter 11 Max. cutting length 20 Max. length between centers 25 Max. bar capacity 2.8 Spindle nose A2-8 Spindle bore 3.1 X-axis travel 7 Z-axis travel 20 Rapid traverse rates 1180 IPM Diameter of tailstock quill 3.1 Stroke of tailstock quill 5.1 Taper of tailstock quill No. 4 M.T. Stroke of tailstock body 18.1 Spindle speeds 36-3,600 RPM
EQUIPPED WITH:
Tailstock (hydraulic) 10 dia. Kitagawa 3-jaw power chuck with (1) set of hard jaws & (20) sets of soft jaws Power collet chuck with (33) Hardinge 5C collets 10 dia. T-slotted faceplate 8-station turret Large amount of turret toolholders and toolblocks (1) bar turning tool Assortment of drill bits, ramers, boring bars (1) live center (1) dead center Tool eye setter Work light Flood coolant Automatic chip conveyor Chuck foot switch Front door interlock Auto. parts catcher 840C Siemens Sinumerik Hitrol EZ 2-axes CNC control with color CRT, RS-232C port 20 H.P. spindle drive 3/60/220 volt electrics (with switchable transformer)
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1997 Make - MITSUBISHI Model - M-TC10B |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5906 , Year = 1997 , Make = MITSUBISHI , Model = M-TC10B |
|
Category: Turning Center 11 in. & over chuck
|
Capacity: MITSUBISHI M-TC10B Diaturn 2-axes CNC Slant Bed Turning Center
|
Ad #
5906 |
Year:
| 1997
|
Make:
| MITSUBISHI
|
Model:
| M-TC10B
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 10,600 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- MITSUBISHI M-TC10B Diaturn 2-axes CNC Slant Bed Turning Center
Max. swing over bed 23.6 Max. swing over carriage 13.8 Max. machining diameter(chuck work) 13.4 Max. machining diameter(center work) 10.2 Max. length between centers 41.3 X-axis travel 8.1 Z-axis travel 42.9 X-axis rapid rate 591 IPM Z-axis rapid rate 787 IPM X,Z-axis feed rate 0.04-275.6 IPM Spindle speed range 22-3000 RPM Spindle diameter 5.12 Spindle bore 3.41 Spindle nose JIS A2-8 Tailstock spindle diameter 3.94 Tailstock center size No. 5 M.T. Tailstock spindle travel 3.94
EQUIPPED WITH:
12-Station turret Programmable tailstock 12Dia. 3-jaw power chuck Automatic chip conveyor Remote foot pedal Flood coolant Quantity of tool holders and chuck jaws Door interlock X-axis MP scale feed back Work light 15 H.P. AC spindle drive Mitsubishi Meldas 325 LG-V control with 14 Color CRT, port, conversational programming
|
Electrical Description |
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1995 Make - MITSUBISHI Model - M-TC8B |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5908 , Year = 1995 , Make = MITSUBISHI , Model = M-TC8B |
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: MITSUBISHI M-TC8B Diaturn 2-axes CNC Slant Bed Turning Center
|
Ad #
5908 |
Year:
| 1995
|
Make:
| MITSUBISHI
|
Model:
| M-TC8B
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: |
|
Weight: | 9,050 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- MITSUBISHI M-TC8B Diaturn 2-axes CNC Slant Bed Turning Center
Max. swing over bed 23.6 Max. swing over carriage 13.8 Max. machining diameter(chuck work) 11 Max. machining diameter(center work) 8.27 Max. length between centers 20.5 X-axis travel 8.1 Z-axis travel 22 X-axis rapid rate 591 IPM Z-axis rapid rate 787 IPM X,Z-axis feed rate 0.04-275.6 IPM Spindle speed range 35-3500 RPM Spindle diameter 4.33 Spindle bore 2.56 Spindle nose JIS A2-6 Tailstock spindle diameter 3.94 Tailstock center size No. 5 M.T. Tailstock spindle travel 3.94
EQUIPPED WITH:
12-Station turret Programmable tailstock 8Dia. 3-jaw power chuck Automatic chip conveyor Remote foot pedal Flood coolant Quantity of tool holders and chuck jaws Door interlock X-axis MP scale feed back Work light 15 H.P. AC spindle drive Mitsubishi Meldas 325 LG-V control with 14 Color CRT, port, conversational programming 3/60/220 volt electrics
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
We found 7 matching ads. Now displaying the remaining 7 ads.
FOR SALE: Year - 1965 Make - LEBLOND Model - 2516-20 |
---|
FOR SALE: Ad # 4036 , Year = 1965 , Make = LEBLOND , Model = 2516-20 |
|
Category: Heavy Duty Large Lathe 24in. & over swing
|
Capacity: 23" x 54" LEBLOND H.D HEAVY DUTY ENGINE LATHE
|
Ad #
4036 |
Year:
| 1965
|
Make:
| LEBLOND
|
Model:
| 2516-20
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 9,250 LBS.
|
Dimension: L x W x H | 136"L X 60"W X 70 1/2"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- MAXIMUM SWING OVER BED WAYS: 29"
DISTANCE BETWEEN CENTERS: 54" SPINDLE BORE: 2 1/16" SPINDLE NOSE: L-2 TAPERED KEYCROSS SLIDE TRAVEL: 14 1/2" TAIL STOCK SPINDLE DIAMETER: 4 1/2" TAIL STOCK SPINDLE TAPER: #5 M.T. 27 SPINDLE SPEEDS: 12 TO 1500 RPM 109 FEEDS: .001-.205 IPR THREAD RANGE: 2 TO 360 T.P.I.
|
Comments: |
- EQUIPPED WITH: SWIVEL COMPOUND,HARDENED REPLACEABLE BED AND CROSS SLIDE WAYS,23 1/2" DIAMETER FACEPLATE,21" DIAMETER 4-JAW CHUCK,18" DIAMETER 3-JAW UNIVERSAL CHUCK W/REVERSIBLE JAWS AND (13)SETS OF SOFT JAWS,12" DIAMETER DRIVE PLATE8 3/4" DIAMETER CAPACITY 3 POINT ROLLER TYPE STEADY REST,MICROMETER CARRIAGE STOP,THREAD DIAL,ALORIS TOOL POST W/(1) TOOL BLOCK,(6) CARBIDE TOOL HOLDERS,NO. 5 M.T. CUTTER HOLDER,CHUCK GUARD AND SPLASH GUARD,WORK LIGHT,PAN BED AND COOLANT,20 H.P. 3/60/208-220-440 VOLT MOTOR AND CONTROLS,WIRED FOR 3/60/220 VOLT OPERATION
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1982 Make - LEBLOND MAKINO Model - Regal Servo Shift |
---|
FOR SALE: Ad # 5367 , Year = 1982 , Make = LEBLOND MAKINO , Model = Regal Servo Shift |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: Leblond Engine Lathe 19" swing x 150" centers
|
Ad #
5367 |
Year:
| 1982
|
Make:
| LEBLOND MAKINO
|
Model:
| Regal Servo Shift
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Massachusetts
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Item # 4198 -- Basic Information
Category Lathes Sub-Category Lathes, Manual Manufacturer LEBLOND MAKINO Model Regal Servo Shift Year 1982 Size 19" x 150"cc Item # 4198 -- Full Description 19 x 150cc LEBLOND MAKINO Regal Servo Shift Engine Lathe, 10 H.P., 3-phase, 60 cycle A.C. main motor and controls, new 1982
Actual swing over bed 19 Ό Swing over cross slide 12 Ό L-2 spindle nose Hole through spindle 3 12 Spindle speeds 40 to 1600 RPM 40 Thread changes Ό to 64 T.P.I. 48 Feed changes .0032 to .104 I.P.R. 23 Metric threads 1.75-63 MM Hardened and ground bedways
EQUIPPED WITH:
Taper attachment 10 3-jaw chuck 12 4-jaw chuck Steady rest 14 face plate 9 3-jaw plain steady rest Chip pan and coolant
Floor space: 3 x 17 ½ x 4 ½ High
Approx. weight: 8,500 lbs.
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - RIVETT Model - 918 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5965 , Year = , Make = RIVETT , Model = 918 |
|
Category: Second Operation
|
Capacity: RIVETT Model 918 Hand Screw Machine
|
Ad #
5965 |
Year:
|
|
Make:
| RIVETT
|
Model:
| 918
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 900 lbs.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Model 918 RIVETT Hand Screw Machine
Swing over bed 9" Distance between spindle and turret face 13 1/2" Collet capacity 1" Step chuck capacity 6" Jaw chuck capacity 6" Spindle capacity 1 1/2" Travel of turret slide 4 1/2" Swing over slide 4 1/2" Spindle speed range 150-3750 RPM
EQUIPPED WITH:
Hand collet closer with collet nose Straight turning slide Hexagon bed turret Steel cabinet AC electrics
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - SMC Model - BV18VS |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5924 , Year = , Make = SMC , Model = BV18VS |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 6" x 14" Single Phase SMC BV18VS Bench type lathe
|
Ad #
5924 |
Year:
|
|
Make:
| SMC
|
Model:
| BV18VS
|
Condition:
| New
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 6" x 14" cc SMC BV18VS Bench type lathe,
New, never used
Maximum swing over bed ways 6 7/8" Maximum swing over cross slide 4 1/2" Maximum length between centers 14" Spindle bore 13/16" 2-ranges of spindle speeds
EQUIPPED WITH:
Induction hardened bed ways 3" diameter 3-jaw universal chuck Built-in 4-way square toolpost Plastic chip guard Power feeds Variable speed drive 1/60/110 volt electric
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1994 Make - ROYAL Model - #1340GHE |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5926 , Year = 1994 , Make = ROYAL , Model = #1340GHE |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 13/18 3/4 x 38cc ROYAL Precision High Speed Removable Gap Bed Lathe
|
Ad #
5926 |
Year:
| 1994
|
Make:
| ROYAL
|
Model:
| #1340GHE
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 1,550 lbs.
|
Dimension: L x W x H | 77" x 35" x 51" |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 13/18 3/4 x 38cc ROYAL Precision High Speed Removable Gap Bed Lathe
Max. swing over bed 13 Max. swing through gap 18 3/4 Length of gap in front of spindle nose 6 Max. swing over cross slide 7 1/2 Spindle bore 1 1/2 Spindle nose D1-4 Camlock Tailstock quill diameter 1 5/8 Size of center in tailstock No. 3 M.T. (8) spindle speeds 70-2000 RPM Longitudinal feeds 0.0020-0.0273 IPR Cross feeds 0.0006-0.0094 IPR Thread range: Inch 4-56 T.P.I. Metric 0.4-7 mm.
EQUIPPED WITH:
Hardened bed ways Removable gap bed Swivel compound Camlock spindle nose 5C hand collet closer with nose 6 dia. 3-jaw universal chuck Micrometer carriage stop (4) change gears Inch/metric threading 3-point plain steady rest 2-point plain follow rest Thread dial Foot brake Work light Splash guard, pan bed and coolant pump 3 H.P. 3/60/220-440 volt motor with controls Wired for 3/60/220 volt operation
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1988 Make - TOS Model - SUI-50 |
---|
FOR SALE: Ad # 4638 , Year = 1988 , Make = TOS , Model = SUI-50 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 20" x 80" cc Model SUI-50 TOS Manual Lathe
|
Ad #
4638 |
Year:
| 1988
|
Make:
| TOS
|
Model:
| SUI-50
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 6,550 lbs
|
Dimension: L x W x H | 141'L X 51"w X 57"h |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Item # 3175 -- Basic Information
Category Lathes Sub-Category Lathes, Manual Manufacturer TOS Model SUI-50 Year 1988 Size 20 x 80cc FOB F.O.B. Truck, Wilmington, DE. Price $ 12500.00 Item # 3175 -- Full Description 20 x 80cc Model SUI-50 TOS Lathe, new 1988
Maximum swing over bed 20 Maximum swing over bed recess 22 Maximum swing over cross slide 12.6 Spindle bore 2.2 Tailstock spindle diameter 3.15 18 spindle speeds 14 to 2240 RPM 42 longitudinal feeds .0009 to .189 IPR 42 cross feeds .0004 to .095 IPR Rapid traverse rates: longitudinal 138 IPM cross 69 IPM Thread range inch ½ to 120 TPI metric .25 to 60mm diametral 0.125 to 15mm module 2 to 240mm
Equipped with:
Hardened ways Swivel compound Inch/metric threading Thread dial Micrometer carriage stop Adjustable cross production stop 16 diameter 4-jaw chuck (new) with extra set of jaws 10 diameter 3-jaw universal chuck with extra jaws Camlock spindle nose 4-way power rapid traverse Rear T-slotted tool rest 5 ½ diameter capacity plain steady rest Plain follow rest Built-in 4-way tool post Work light Pan bed and coolant with splash guards Live center Dead center for head stock 10 H.P. 3/50/380 volt motor Input voltage: 3/50/380 volt
Approximate weight: 6,550 lbs
Dimensions: 141L x 51W x 57High
Condition: excellent
PRICE: F.O.B. Truck, Wilmington, DE
$12,500.00
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1979 Make - TOS Model - SN-63 |
---|
FOR SALE: Ad # 4626 , Year = 1979 , Make = TOS , Model = SN-63 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: TOS SN63 Removable Gap Bed Lathe
|
Ad #
4626 |
Year:
| 1979
|
Make:
| TOS
|
Model:
| SN-63
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 7,400
|
Dimension: L x W x H | 198"L x 57"W |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Item # 3912 -- Basic Information
Category Lathes Sub-Category Lathes, Gap Bed Manufacturer TOS Model SN63 Year 1979 Size 25"/34-1/2" x 120"cc FOB Baltimore, MD Price $ 12500.00 Item # 3912 -- Full Description 25/34 ½ x 120cc TOS SN63 Removable Gap Bed Lathe, new 1979
Maximum swing over bed 25 Maximum swing over cross slide 13 ½ Maximum swing in gap 34 ½ Length of gap from spindle nose 15 Ό Spindle nose D1-8 Camlock Spindle bore 2 Ύ Size of centers No. 5 M.T. Bed width 18 Cross slide travel 16 Top slide travel 7 Tailstock spindle diameter 3 ½ Tailstock spindle travel 9 ½ 16 spindle speeds 10-1000 RPM Longitudinal feeds .002-.242 IPR Cross feeds .001-.121 IPR Thread range: Inch 1-80 T.P.I. Metric 0.5-4.0 mm D.P. 2-72 Module 0.25-20
EQUIPPED WITH:
Removable gap bed Induction hardened bedways Swivel compound T-slotted rear rest D1-8 Camlock spindle Inch/Metric threading Thread dial 2-axes TRAK digital readouts 18in. diameter 4-jaw chuck 18in. diameter 3-jaw universal chuck with (6) sets of soft jaws 12 diameter capacity 3-point roller steady rest Aloris toolpost with (10) holders and boring bar Micrometer carriage stop Pipe center Pan bed and coolant 10 H.P. main drive motor 3/60/480 volt electrics
Condition: Good
Approximate weight: 7,400 lbs.
Floor space: 198L x 57W
Price: F.O.B. Truck, Baltimore, MD
.$12,500.00
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 1998 Make - AMERICAN Model - RM-30 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5354 , Year = 1998 , Make = AMERICAN , Model = RM-30 |
|
Category: Gantry Type Mills and Routers
|
Capacity: RM-30 AMERICAN GFM high speed CNC router
|
Ad #
5354 |
Year:
| 1998
|
Make:
| AMERICAN
|
Model:
| RM-30
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Washington
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- -- Basic Information
Category CNC Machining Centers Sub-Category Gantry Type Manufacturer AMERICAN Model RM-30 Item # 4011 -- Full Description Model RM-30 AMERICAN GFM high speed CNC router, new 1998
Maximum part size-tables joined 200 x 67.7 Maximum part size (x 2) tables apart 78.7 x 67.7 X-axis travel 204.7 Y-axis travel 92.3 Z-axis travel 11 T-axis travel n x 360° Feed rates X & Y/Z (in/min) 800/295 Accuracy (all axes) +/- 0.003 Spindle power-nominal/max 5KW/7KW Spindle speed-minimum/max 4500/45000 RPM Spindle taper SKI 25 Automatic tool changer 8-position
EQUIPPED WITH:
GFM CNC 6000 CNC control Automatic tool changer Tool cooling system CNC controlled-(2) position vacuum pods for work Split table for maximum size or pendular operation Heidenhain-rotary encoders Z-axis driven pressure foot for part vibration control
Condition: excellent Original purchase price......................$1,400,000.00 USD
|
|
|
FOR SALE: Year - 1991 Make - Cincinnati-Milicron Model - AM |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5348 , Year = 1991 , Make = Cincinnati-Milicron , Model = AM |
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: T-20 Cincinnati-Milicron 3-axes CNC Horiz. Machining Center
|
Ad #
5348 |
Year:
| 1991
|
Make:
| Cincinnati-Milicron
|
Model:
| AM
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 30,000lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
-
Category CNC Machining Centers Sub-Category Horizontal Manufacturer CINCINNATI-MILACRON Model AM Year 1991 Size T-20 -- Full Description T-20 Cincinnati-Milacron 3-axes CNC Horizontal Machining Center with Dual Shuttle system and 65 automatic toolchanger, Model AM, New 1991 ( hrs.usage meter 18,125 hrs.)
Longitudinal travel (x axis) : 32" Range, C/L of B-axis to C/L of spindle : +/- 16" Vertical travel (y axis) : 32" Range, top of pallet to C/L of spindle : 0 to 32" Cross travel (z axis) : 32" Range, C/L of B axis to spindle gage line : 6 to 38" Pallet working surface : 24.8" x 24.8" Load capacity : uniform : 3000 lbs. offset 5" : 2500 lbs. B-Axis: Pallet stations No.programmable index positions : 360 Index speed : 25 RPM Spindle speed range : 20 to 6000 RPM Spindle taper : No.50 ANSI V-flange Feed rates of slides : 0.1 -720 IPM Rapid traverse rate : 720 IPM Max.tool weight : 60 lbs. Max.tool length : 18" Max.tool diameter : (fullchain) : 4" (adjacent pockets empty) : 12" Automatic tool change time 12 seconds
EQUIPPED WITH :
Dual shuttle system with extra table 65 tool automatic toolchanger B-axis with 360 positions, 1 deg Coolant system (31) toolholders Automatic chip conveyor Oil cooler 20 H.P. Spindle Drive Motor Cincinnati Acramatic 950 CNC control with CRT, keyboard and ports 3/60/460 Volt input
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1986 Make - KIWA Model - EXCEL 4 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5904 , Year = 1986 , Make = KIWA , Model = EXCEL 4 |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: EXCEL 4 KIWA 3-axes CNC Vertical Machining Center with 16 ATC
|
Ad #
5904 |
Year:
| 1986
|
Make:
| KIWA
|
Model:
| EXCEL 4
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 9500 lbs.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Table working surface 17.2 x 32.8
X-axis travel 21.7 Y-axis travel 17.7 Z-axis travel 21.7 Taper in Spindle CAT 40 Spindle speeds to 4000 RPM Cutting feed up to 160 IPM Rapid traverse rate X & Y axes 560 IPM Z axis 480 IPM Distance spindle to table 28 Max, 6 Min. Max. table load 660 lbs. Max. tool dia. 3.8 Max. tool length 9.8 Max. tool weight 14 lbs.
EQUIPPED WITH:
16 Bi-directional Random Automatic tool changer Flood coolant 7 ½ H.P. 3/60/220 Volt Spindle drive with controls Fanuc 10M CNC control in swing pendant w/ CRT
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1999 Make - HAAS Model - HS-1RP |
---|
FOR SALE: Ad # 5901 , Year = 1999 , Make = HAAS , Model = HS-1RP |
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: HAAS Four-axis Horizontal Machining center
|
Ad #
5901 |
Year:
| 1999
|
Make:
| HAAS
|
Model:
| HS-1RP
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 14,000 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
New Jersey
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Preowned HAAS Four-axis Horizontal Machining center, Model HS-1RP,new December 1999; installed 2000
Number of pallets 2 Size of pallets 15.75 x 15.75 Pallet indexing 360,000° Table load capacity 880 lbs X-Axis travel 24 Y-Axis travel 20 Z-Axis travel 22 Spindle taper CAT 40 Spindle speeds up to 10,000 R.P.M. Rapid traverse rate, all axes 710 I.P.M.
EQUIPPED WITH:
HAAS four-axis CNC control (software version 10.22) with RS-232 port and floppy disk drive (3.5) Servo driven twenty-four position automatic toolchanger Twin pallet changer Geared spindle drive High speed brushless servo drive motors Thru spindle coolant Tool length probe ready Rigid tapping Remote jog handle 1 MB memory Quick code Coordinate rotation scaling Custom macros Triple chip augar 20 H.P. Vector spindle drive motor and electrical controls Machine is wired for 230 volt operation
|
|
|
We found 6 matching ads. Now displaying the remaining 6 ads.
FOR SALE: Year - 1998 Make - ACER ULTIMA Model - EVS-3VKH |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 3024 , Year = 1998 , Make = ACER ULTIMA , Model = EVS-3VKH |
|
Category: Vertical Bed Mills
|
Capacity: 3 H.P. Model EVS-3VKH ACER ULTIMA Variable Speed Vertical Mill,
|
Ad #
3024 |
Year:
| 1998
|
Make:
| ACER ULTIMA
|
Model:
| EVS-3VKH
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: |
|
Weight: | 3,100 lbs.
|
Dimension: L x W x H | 68"LR x 74" FB x 96" High |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Table working surface: 10" x 50"
Longitudinal traverse: 36" Cross traverse: 15.75" Ram traverse: 24" Vertical traverse (knee): 16" Quill traverse: 5" Spindle taper: R-8 Variable speed: speeds 60-4500 RPM (3) power spindle feeds: .0015, .003, .006 IPR
|
Comments: |
- Hardened and ground square ways
Chrome plated and ground spindle quill Model AL-250 table power feed Bijur one-shot lubricator Oil-mist coolant attachment Rubber way corner on inside knee ways 2-axes electronic variable speed drive 3/60/230 Volt electrics
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1970 Make - LUCAS Model - |
---|
FOR SALE: Ad # 4941 , Year = 1970 , Make = LUCAS , Model = |
|
Category: Horizontal Boring Mills
|
Capacity: 5" LUCAS Table Type Horizontal Boring Mill, Model 542B120
|
Ad #
4941 |
Year:
| 1970
|
Make:
| LUCAS
|
Model:
|
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 81,000 lbs
|
Dimension: L x W x H | 255"L x 230"W x 160"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Item # 4085 -- Basic Information
Category
Horizontal Boring Mills
Sub-Category
Boring Mill, Table Type, Manual
Manufacturer
LUCAS
Model
Year
1970
Item # 4085 -- Full Description
5 LUCAS 542B120 table type horizontal boring mill, new 1970
Diameter of spindle 5 Taper in spindle No. 50 ASA power draw-bar Spindle traverse 36 Headstock vertical travel 84 Table working surface 48 x 122 Table cross travel 108 Table longitudinal travel 95 ⅝ Width across 4 bedways 120 Width across column ways 23 Spindle speed range 10-1220 RPM (42) feeds .0001 1.038 IPR Rapid traverse rate 112 IPM
EQUIPPED WITH:
10 length bed #50 power draw-bar spindle Hardened built-in 4-way bed All hardened ways Power rapid traverse Multiple pendant control with selection of speeds and feeds Acu-Rite 2-axes digital readouts Scales & verniers (6) No. 50 toolholders with tools 25 H.P. 3/60/208, 220, 440 volt motor with controls Wired for 3/60/208 volt operation
Condition: excellent
Dimensions: 255L x 230W x 160High
Approx. weight: 81,000 lbs.
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1973 Make - CINCINNATI Model - 415-16-VDT |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4651 , Year = 1973 , Make = CINCINNATI , Model = 415-16-VDT |
|
Category: Vertical Bed Mills
|
Capacity: CINCINNATI Dial Type Vertical Mill, #415-16-VDT
|
Ad #
4651 |
Year:
| 1973
|
Make:
| CINCINNATI
|
Model:
| 415-16-VDT
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 11,300 lbs
|
Dimension: L x W x H | 140.25"LRx117 15/16"FB |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- #415-16-VDT CINCINNATI Dial Type Vertical Mill
Table working surface: 16 1/4" x79 3/4" Range: longitudinal: 42" cross:16" vertical (knee): 16" vertical (head): 6" Max.distance, spindle nose to table: 22 1/8" Taper in spindle: No.50 std. 24 spindle speeds 16-1600 RPM 32 longitudinal + cross feeds: 3/8 to 90 IPM 32 vertical feeds (knee): 3/16 to 45 IPM Rapid traverse rate: longitudinal + cross: 150 IPM vertical (knee): 75 IPM
EQUIPPED WITH:
Power rapid traverse 3 H.P individual feed motor Power feed and rapid traverse to vertical head Turret stop, 4-position with dial indicator Automatic backlash eliminator Coolant system Manual draw bar (1) toolholder w/cutter Hardened knee ways 15 HP 3/60/230-460 Volt main drive motor + controls
|
Electrical Description |
|
Comments: |
- 3 units available460 & 220 volt
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1967 Make - Moore Model - |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4646 , Year = 1967 , Make = Moore , Model = |
|
Category: Vertical Boring Mills
|
Capacity: #1 1/2 B Moore Jig Boring Machine
|
Ad #
4646 |
Year:
| 1967
|
Make:
| Moore
|
Model:
|
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 2,300 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Item # 3946 -- Basic Information
Category Mills, Keyseaters, Jig Borers Sub-Category Jig Borers Manufacturer MOORE Model Year 1967 Size #1-1/2 FOB Wilmington, DE. Price $ 1750.00 Item # 3946 -- Full Description (1) Preowned #1 ¨φ B MOORE Jig Boring Machine, new 1967
Table working surface 10 ¨φ‘± x 19 ¨φ‘± Range: longitudinal 14‘± cross 9‘± Height, table top to spindle end minimum 3‘± maximum 16‘± Vertical adjustment of quill housing 9‘± Spindle quill travel 3 ¨ώ‘± Spindle center to column ways 10‘± Spindle center to column below ways 12‘± Spindle speeds, infinitely variable 120-2400 RPM (2) Spindle speeds .001 and .003 IPR Maximum boring capacity tool steel 3‘± soft steel 5‘±
EQUIPPED WITH:
Quick-change drill chuck Way covers .5/1 H.P. 2-speed main drive motor
Approximate weight: 2,300 lbs.
Condition: Very good
Price: F.O.B. Truck, Wilmington, DE...........$1,750.00
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1968 Make - Kearney & Trecker Model - #550 TF-20 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4650 , Year = 1968 , Make = Kearney & Trecker , Model = #550 TF-20 |
|
Category: Horizontal Mills
|
Capacity: Kearney & Trecker wide knee twin screw plain horizontal mill
|
Ad #
4650 |
Year:
| 1968
|
Make:
| Kearney & Trecker
|
Model:
| #550 TF-20
|
Condition:
|
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 18,200 lbs
|
Dimension: L x W x H | 112.5"LRx112"FBx75"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Item # 3219 -- Basic Information
Category Mills, Keyseaters, Jig Borers Sub-Category Mills, Manual Horizontal Manufacturer KEARNEY & TRECKER Model #550 TF-20
Year 1968 Size #5 FOB F.O.B. Truck, Wilmington, DE Price $ 14500.00 Item # 3219 -- Full Description #550TF-20 KEARNEY & TRECKER Wide Knee Twin Screw Plain Horizontal Mill with H.D. Vertical Milling Attachment, (New 1968)
Table working surface: 19-1/2" x 96" Range - longitudinal: 50" cross: 16" vertical (knee): 21" Taper in spindle: No. 50 24-Spindle speeds: 15 to 1500 RPM 32-Feeds - longitudinal & cross: 3/8 to 90 IPM vertical: 1/8 to 30 IPM Rapid traverse rate: 150 IPM
EQUIPPED WITH:
H.D. right angle swivel milling attachment Mono-lever and automatic cycle table with (7) table dogs Milling vise Twin screw knee with hardened ways Front mounted table handwheel Power rapid traverse (1) Arbor support (1) Arbor with cutter Manual draw bolt Coolant Motor Amp meter Rear controls 5 H.P. feed motor 50 H.P. 3/60/220-440 volt main drive motor w/controls Machine wired for 3/60/440 volt operation
Approx. total weight: 18,200 lbs. Dimensions: 112-1/2"LR x 112"FB x 75"High
PRICE: F.O.B. TRUCK, WILMINGTON, DE.................................$14,500.00
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1988 Make - CINCINNATI-MILACRON Model - #207 MK |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4648 , Year = 1988 , Make = CINCINNATI-MILACRON , Model = #207 MK |
|
Category: Horizontal Mills
|
Capacity: #207 MK CINCINNATI-MILACRON Plain Dial Hrizontal Mill
|
Ad #
4648 |
Year:
| 1988
|
Make:
| CINCINNATI-MILACRON
|
Model:
| #207 MK
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 6,800 lbs
|
Dimension: L x W x H | 101"LR x 105.5"FB x 66"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Item # 3997 -- Basic Information
Category Mills, Keyseaters, Jig Borers Sub-Category Mills, Manual Horizontal Manufacturer CINCINNATI-MILACRON Model #207 MK Year 1988 Size #2 FOB Wilmington, DE. Price $ 14500.00 Item # 3997 -- Full Description #207 MK CINCINNATI-MILACRON Plain Dial type horizontal mill with double-swivel vertical attachment, Model EDR, new 1988
Table working surface 13.75 x 59.5 Range longitudinal 33.5 cross 13.72 vertical (knee) 18.75 Maximum distance, spindle center to table 18.75 Spindle nose (horizontal) No. 50 standard Spindle nose (vertical) No. 40 standard 16 spindle speeds 25-1500 RPM 16 longitudinal and cross feeds ½-60 IPM 16 vertical feeds Ό-30 IPM Rapid traverse rate longitudinal and cross 150 IPM vertical 75 IPM
EQUIPPED WITH:
Angular double-swivel vertical milling attachment with No. 40 taper, manual draw-bolt and accessory hinge for storage Hardened knee 3-axes automatic table cycle control Dual-inch/metric dials Side controls Horizontal manual draw-bolt Dynapoise overarm with (3) arbor supports Low lead attachment with box, adapters, 16 change gears Hofmann dividing head, tailstock and work support with (2) index plates, 8 diameter 3-jaw chuck, 5 center height Trak 102-2-axes digital readouts Power rapid traverse Simple pendant control Coolant system Work light (3) No. 50 arbors with spacers (1) No. 50 cutter holder (14) No. 40 end mill holders (7) No. 40 cutter holders 5.5 H.P. feed motor 7.5 H.P. 3/60/575 volt main drive motor with controls Transformer for 3/60/230 or 460 volt input
Condition: excellent
Approximate weight: 6,800 lbs.
Floor space required: 101LR x 105.5FB x 66High
Price: F.O.B. Truck, Wilmington, DE................................$14,500
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1962 Make - SASS Model - TRP 3000 |
---|
FOR SALE: Ad # 4567 , Year = 1962 , Make = SASS , Model = TRP 3000 |
|
Category: Radial Drill Press
|
Capacity: Sass TRP 3000 Radial Arm Drill
|
Ad #
4567 |
Year:
| 1962
|
Make:
| SASS
|
Model:
| TRP 3000
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | 11' x 29.5" |
Machine Location:
|
City: |
On Request
|
State: |
Pennsylvania
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- No Photos Available
Item # 4013 -- Basic Information Category Drilling & Tapping Sub-Category Drill, Radial Manufacturer SASS Model TRP 3000 Year 1962 Size 11' x 29.5" FOB Philadelphia, PA. Price $ 39500.00 Item # 4013 -- Full Description Model TRP 3000, SASS 11 x 29.5 heavy duty radial arm drill, new 1962
Arm length 11 Column diameter 29.5 Swing radius 133 Spindle diameter 5.3 Spindle taper No. 6 M.T. Drilling capacity, mild steel 5.9 Spindle feed traverse 24.8 Maximum distance, spindle to floor 147 Vertical traverse of arm on column 112 Spindle speeds (42) .06 to 1040 RPM Spindle feeds .060 to 3.00 mm Spindle horse power 35
EQUIPPED WITH:
78.7 x 236 T-slotted floor plate 39 x 39 x 20 T-slotted box table Operators pendant control Power rapid traverse Power clamping of head and column Work light Coolant
Condition: Excellent
Price: F.O.B. Truck, Philadelphia, PA........................$39,500.
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1970 Make - Eldorado Model - M7149 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4565 , Year = 1970 , Make = Eldorado , Model = M7149 |
|
Category: Gun / Deep Hole Drills
|
Capacity: ELDORADO Mega-Matic Hydraulic Horizontal Gun Drill
|
Ad #
4565 |
Year:
| 1970
|
Make:
| Eldorado
|
Model:
| M7149
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 6000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 3/4 " ELDORADO Mega-Matic Hydraulic Horizontal Gun Drill
Drilling capacity: 3/4" Dia. Drilling stroke: 18" Variable speeds to 10,000 RPM Variable feeds to 20 IPM T-slotted set-up are: 22" x 22"
EQUIPPED WITH:
Automatic Cycle control Rapid advance Manual or automatic feed Swing type operator's control station Hardened ways 5 H.P. 3600 RPM Drive Motor 7 1/2" H.P. 3/60/208-230-460 Volt high pressure coolant and filtration system 7 1/2" H.P. hydraulic power unit
|
Comments: |
- Can not be easily powered up, needs a couple Sol.switches replaced on stroke cycle , minor repair-few hundred dollars...
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 6 matching ads. Now displaying the remaining 6 ads.
FOR SALE: Year - Make - JET Model - CTAS-10-1 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 3022 , Year = , Make = JET , Model = CTAS-10-1 |
|
Category: Cold Saws & Power Hack Saws
|
Capacity: 36" x 27" JET Tilting Arbor Table Saw
|
Ad #
3022 |
Year:
|
|
Make:
| JET
|
Model:
| CTAS-10-1
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 530 lbs.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Saw diameter 10"
Arbor hole diameter 5/8" Maximum depth of cut 3" Maximum rip to right of blade 26" Maximum rip to left of blade 15-1/2" Maximum thickness of cut at 45 Ί 2-1/8" Table in front of saw blade at maximum cut 12" Maximum width of dado 13/16" Table height 34" Table size with extension 36"W x 27"D Table size without extension 20"W x 27"D Overall dimensions (maximum) 40"D x 46"W x 36-1/2"H Spindle speed 4200 RPM Blade not included
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1984 Make - DO-ALL Model - CONTOURMATIC 3612-2H |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4709 , Year = 1984 , Make = DO-ALL , Model = CONTOURMATIC 3612-2H |
|
Category: Vertical Band Saws
|
Capacity: 36" DO-ALL Contour-Matic Vertical Band Saw
|
Ad #
4709 |
Year:
| 1984
|
Make:
| DO-ALL
|
Model:
| CONTOURMATIC 3612-2H
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 2,200 lbs
|
Dimension: L x W x H | 59"LR x 74"fb x 77.5"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
-
Item # 3882 -- Basic Information Category Saws Sub-Category Saws, Vertical Band Manufacturer DO-ALL Model Contourmatic 3612-2H Year 1984 Size 36 FOB Wilmington, DE. Item # 3882 -- Full Description (1) Preowned 36 DO ALL Contour-Matic Vertical Band Saw, Model 3612-2H,new 1984
Throat, band to column 35 ½ Maximum work height 12 Band width 1/16 to 1 Saw band length, two wheel drive 125 Saw band length, three wheel drive 175 Band speed, infinitely variable, two ranges 5-300 FPM, 850-5,200 FPM Number of table t-slots 2 Table size (with coolant trough) 26 ½ x 33 ½ Table height to floor 40 Ό Table tilts 45° R, 10° L Table feed, hydraulically actuated 0 to 6 FPM Table feed force 0 to 175 lbs. Table stroke 12
EQUIPPED WITH:
DO ALL Hi-Torque DC electronic drive-drive system delivers up to 85% of torque directly to the drive wheel. Electronic speed control holds band speed at the proper settings so that speed change is instantaneous. By eliminating many components of the mechanical speed control assemblies vibration is minimalized, which provides far better blade life. And, almost all the torque is delivered to the point of cut. Hydraulically actuated table feed with (3) position (forward/reverse/stop) remote electric foot pedal control Butt welder with flash grinder and blade shear Air compressor and mist coolant Dual range transmission with tachometer Band tension indicator dial Work light 3 H.P. 3/60/230-460 volt blade drive motor and electrical controls Machine is wired for 460 volt operation
An optional 1-year breakdown warranty may be available for only 4% of the purchase price. Call for details.
Approx. weight: 2,200 lbs.
Approx. floor space required: 59L-R x 74F-B x 77 ½High
Condition: Exceptional
|
|
|
FOR SALE: Year - 1982 Make - COSEN Model - SA400 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4688 , Year = 1982 , Make = COSEN , Model = SA400 |
|
Category: Horizontal Band Saws
|
Capacity: 16" x 24" COSEN Horizontal Band Saw, Model SAH400
|
Ad #
4688 |
Year:
| 1982
|
Make:
| COSEN
|
Model:
| SA400
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | 92"LRx45"FBx90"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 16 x 24 SAH400 COSEN Horizontal Band Saw, new 1982
Maximum diameter of cut 16 Maximum width of cut 24 Blade size 1 Ό
Equipped with:
Double vertical column design Power vise 14 discharge tray (2) dead entry rollers Coolant Wire brush 1 ½ H.P. hydraulic unit 5 H.P. 3/60/220-440 volt main-drive motor with controls Wired for 3/60/220 volt operation
Dimensions: 92LR x 45FB x 90 High
|
|
|
FOR SALE: Year - 1965 Make - DO-ALL Model - 2612-2H |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 5873 , Year = 1965 , Make = DO-ALL , Model = 2612-2H |
|
Category: Vertical Band Saws
|
Capacity: 26 DO-ALL Contour-Matic Vertical Band Saw with Hydraulic Feed Table
|
Ad #
5873 |
Year:
| 1965
|
Make:
| DO-ALL
|
Model:
| 2612-2H
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3,500 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Throat: 26
Work height: 12 Table size: 24 x 30 ½ Table weight-capacity: 1000 lbs. Table tilt: R-45°, L-10° Blade size 1/16-1 Variable blade speeds 25 - 6000 FPM
EQUIPPED WITH: Tilt table Hydraulic table feed with remote foot pedal control Contouring attachment DBW-8 butt welder, grinder and shear Air pump and chip blower Built-in coolant pump and tank Variable blade speeds Work light 3 H.P. 3/60/220-440 volt motor and controls Wired for 3/60/220 volt operation
|
Electrical Description |
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1994 Make - DO-ALL Model - 3613-1 |
---|
FOR SALE: Ad # 5778 , Year = 1994 , Make = DO-ALL , Model = 3613-1 |
|
Category: Vertical Band Saws
|
Capacity: 36 3613-1 DO-ALL Vertical Band Saw
|
Ad #
5778 |
Year:
| 1994
|
Make:
| DO-ALL
|
Model:
| 3613-1
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 1,500 lbs
|
Dimension: L x W x H | 80 Ό x 39 |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Throat 36
Maximum work height 13 Table size 24 x 30 ½ Table tilt 45° Right, 10° Left (2) ranges infinitely variable band speeds 50-300, 850-5200 FPM Table weight capacity 500 lbs. Maximum table feed 12 Band length 125 Band width 1/16-1
|
Electrical Description |
|
Comments: |
- EQUIPPED WITH:
Manual tilt-table with (2) T-slots, air feed and mechanical stops (2) range variable speed drive Band speed and tension indicators Extra steel insert-type guides Job selector Post elevating handwheel Work light Chip blower DBW-15 butt welder, grinder and shear Push button controls 3 H.P. 3/60/230-460 volt drive motor
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1972 Make - MARVEL Model - Series 15A4 |
---|
FOR SALE: Ad # 5775 , Year = 1972 , Make = MARVEL , Model = Series 15A4 |
|
Category: Horizontal Band Saws
|
Capacity: 15x20 MARVEL Series 15A4 Automatic Horizontal Band Saw,
|
Ad #
5775 |
Year:
| 1972
|
Make:
| MARVEL
|
Model:
| Series 15A4
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 8000 lbs
|
Dimension: L x W x H | 260L x 145 ΎW x 56 ½ High |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Capacity 15x20
Blade length 156 Blade width 1x.035 Infinitely variable blade speeds 55-400 FPM Infinitely variable feed pressure 0-200 lbs. Shuttle travel-one cycle 0 to 24 Max. load capacity 7000 lbs.
|
Electrical Description |
- Wired for 3/60/460 Volt operation
|
Comments: |
- EQUIPPED WITH:
10L Automatic feed table with (2) hydraulic vises and (7) rollers Hydraulic vise on main frame 10L dead roller conveyor table (exit side) Coolant system Work light Operators control console Ό H.P. coolant pump 2 H.P. Hydraulic pump 5 H.P. 3/60/230-460 Volt Main Drive Motor w/ controls
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1981 Make - BLANCHARD Model - 42 hd-84 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4584 , Year = 1981 , Make = BLANCHARD , Model = 42 hd-84 |
|
Category: Vertical Spindle - Blanchard Type
|
Capacity: BLANCHARD 84" Rotary Surface Grinder, 42 HD-84
|
Ad #
4584 |
Year:
| 1981
|
Make:
| BLANCHARD
|
Model:
| 42 hd-84
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Ohio
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- MODEL # 42HD-84 BLANCHARD 84" ROTARY SURFACE GRINDER
Reconditioned by Blanchard in 2001 and unused since
Maximum Swing: 96" Table Diameter: 84" Maximum Work Height: 24" Segmental Chuck Diameter: 40" Table Speeds: 3 - 11.9 RPM
EQUIPPED WITH: Dresser Neutrofier Controls 150 HP Geared Drive Polycon Exterior Coolant System
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1971 Make - WYSONG Model - 1238 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4859 , Year = 1971 , Make = WYSONG , Model = 1238 |
|
Category: Power Squaring Shear (Mechanical)
|
Capacity: 12' x 3/8" Model 1238 WYSONG Mechanical Shear
|
Ad #
4859 |
Year:
| 1971
|
Make:
| WYSONG
|
Model:
| 1238
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 37,000 lbs
|
Dimension: L x W x H | 240"LR x 127"FB x 68"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- WYSONG
Model 1238 Serial Number S/N P35-140 Year 1971 Size 3/8 x 12' Item # 3567 -- Full Description 12' x 3/8" Model 1238 WYSONG Mechanical Shear, S/N P35-140, new 1971
Shearing length: 144" Capacity, mild steel: 3/8" Capacity, stainless steel: 9/32" Number of holddown feet: 19 Holddown feet centers: 7" to 8" Rake of upper blade: 5/16" Front gauge range: 48" Back gauge range: 36" Speed: 50 SPM
EQUIPPED WITH: 36" Capacity front operated 2-speed power back gauge 10' R.H. Squaring arm w/gauge and angle guides (3) Front arm extensions Dual remote pneumatic foot controls Air actuated clutch control Built-in ball transfers in table (2) Sets of blades Light beam shearing gauge Automatic lubrication Metal finger guard Non-metallic gibs Spring activated holddowns Single or continuous operation 20 H.P. 3/60/230-460 volt main motor w/controls Wired for 3/60/460 volt operation
APPROX WEIGHT: 37,000 Lbs.
FLOOR SPACE w/GAUGES: 240"LR x 127"FB x 68"High
CONDITION: Very Good
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1982 Make - HTC Model - CL-625-7 |
---|
FOR SALE: Ad # 5749 , Year = 1982 , Make = HTC , Model = CL-625-7 |
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 7' x 5/8" HTC hydraulic shear,
|
Ad #
5749 |
Year:
| 1982
|
Make:
| HTC
|
Model:
| CL-625-7
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 24,000 lbs
|
Dimension: L x W x H | 140L x 89W(with arms) x 113 |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Flush floor design, no pit
Shearing length 88" Capacity, mild steel 5/8" Blade size 1 1/8" x 5" Rake angle/foot .500" Number of hold-downs 4 Clearance hold-downs to table 2 3/4" Speed: full cut 11 SPM 1/2 cut 17 SPM 12" cut 25 SPM Speed: down 94 IPM up 170 IPM
|
Electrical Description |
- Wired for 3/60/440 volt operations
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 1980 Make - WYSONG Model - 150-12 |
---|
FOR SALE: Ad # 4777 , Year = 1980 , Make = WYSONG , Model = 150-12 |
|
Category: Press Brakes (Mechanical)
|
Capacity: 150 Ton WYSONG Mechanical Press Brake, Model 150-12
|
Ad #
4777 |
Year:
| 1980
|
Make:
| WYSONG
|
Model:
| 150-12
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 29,200 lbs
|
Dimension: L x W x H | 213"L x 80"W x 114"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- # 3897 -- Basic Information
Category Fabricating Sub-Category Press Brakes, Mechanical Manufacturer WYSONG Model 150-12 Serial Number PB51-112 Year 1980 Size 150 Ton FOB Wilmington, DE. Price Item # 3897 -- Full Description 150 Ton Model 150-12 WYSONG Mechanical Press Brake, New 1980
Tonnage near bottom of stroke 150 Tons Tonnage at mid-stroke 100 tons Bending capacity 12 x 3/16 8 x Ό Overall length of bed and ram 14 Distance between housings 12 6 Throat depth 8 ½ Stroke 3 Ram adjustment 5 Die Space 12 Speed 30 SPM
EQUIPPED WITH:
Automatic Speed Selector with Hi-Lo speed cycle control Bed and ram machined for angles Motorized ram adjustment Dual micrometer leveling indicators Non-metallic gibbing system Totally enclosed twin drive Automatic lubrication system Air clutch with Gordon brake monitor Dual palm buttons Remote electric foot switch 1 ½ H.P. Ram adjustment motor 10 H.P. 3/60/220-440 volt motor and controls
Condition: very good
Approx. weight: 29,200 lbs.
Dimensions: 213L x 80W x 114Height above floor level
Requires 10 pit depth for bed
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1991 Make - CINCINNATI Model - 230AF-16 |
---|
FOR SALE: Ad # 5743 , Year = 1991 , Make = CINCINNATI , Model = 230AF-16 |
|
Category: Press Brakes (Hydraulic)
|
Capacity: 18' x 230 Ton CINCINNATI Auto Form Hydraulic Press Brake
|
Ad #
5743 |
Year:
| 1991
|
Make:
| CINCINNATI
|
Model:
| 230AF-16
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 52,000 Lbs
|
Dimension: L x W x H | 258" L-R x 50" F-B x 132" High |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Rated tonnage at bottom of stroke 230 ton
Rated bending capacity 18' x 10 Ga. Overall length of bed and ram 18' Distance between housings 16'6" Length of stroke, adjustable up to 10" Open height 17" Closed height 7" Throat depth 8" Speed, approach 155 I.P.M. slow form 3.4 I.P.M. medium form 6.8 I.P.M. rapid form 17 I.P.M. return 175 I.P.M. Depth x thickness of pit required 15" x 6" Length of pit required 16'6"
|
Electrical Description |
|
Comments: |
- EQUIPPED WITH:
Auto Form multi-axis CNC control with graphics 24" Capacity (X-axis) CNC back gauge with 8" of vertical (R-axis) adjustment Auto crowning option 18' Lower die rail and a full complement of sectional upper die clamps Bed and ram machined for removable angle brackets Ram mounted dual electric palm buttons or remote electric foot pedal control of ram actuation 25 H.P. hydraulic pump motor and electrical controls
|
|
|
FOR SALE: Year - 1977 Make - CINCINNATI Model - Series 135 CB x 8' |
---|
FOR SALE: Ad # 5746 , Year = 1977 , Make = CINCINNATI , Model = Series 135 CB x 8' |
|
Category: Press Brakes (Hydraulic)
|
Capacity: 135 Ton CINCINNATI Series 135 CB x 8 Hydraulic Press Brake, with 2-ax
|
Ad #
5746 |
Year:
| 1977
|
Make:
| CINCINNATI
|
Model:
| Series 135 CB x 8'
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Flush floor design
Capacity at bottom 135 Tons Overall length of bed and ram 10" Distance between housings 8' 6" Max. stroke 8" Throat depth 7" Die space 12"
|
Comments: |
- EQUIPPED WITH:
Hurco Autobend IV single axis CNC back gauge CNC control of rams Lower die holder Dual palm buttons Remote electric foot control Bed and ram machined for angles AC electrics
|
|
|
FOR SALE: Year - 2001 Make - FRATELLI FARINA Model - PFO-PS-N |
---|
FOR SALE: Ad # 5745 , Year = 2001 , Make = FRATELLI FARINA , Model = PFO-PS-N |
|
Category: Press Brakes (Hydraulic)
|
Capacity: 100" x 137 Ton FRATELLI FARINA (Built in Italy) Hydraulic Press Brake
|
Ad #
5745 |
Year:
| 2001
|
Make:
| FRATELLI FARINA
|
Model:
| PFO-PS-N
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 23,000 Lbs.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Rated tonnage 125 metric ton/137 U.S. short ton
Overall length of ram 100-3/8" Overall length and width of bed 100-3/8" x 6-3/4" Distance between uprights 86-1/4" Distance, centerline of bed to machine frame 12-5/8" Length of stroke, approximately 14" Maximum distance, top of bed to bottom of upper 16" die holder plates Distance, floor to machine bed 37" Bed width x depth (for die tang) 1/2" x 3/4" with (5) 7/16" wide t-slots Hydraulic tank capacity 100 gallons
|
Electrical Description |
- 3/60/460 volt hydraulic pump motor and e
|
Comments: |
- Equipped With:
Flush floor design, no pit required Roller bearing type ram guides #DA65 DELEM (Manufactured in the Netherlands) two-axis CNC control of ram traveland back gauge in and out positioning. Control has a 3.5" floppy disc drive, RS-232 port, 11" CRT, and is mounted in a swing-arm pendant. Manual vertical adjustment of back gauge height (16) 6" Wide upper die holders (3) Hydraulically actuated bed deflection compensation cylinders (2) 5" Wide x 23-5/8" long front mounted work support arms that are fully adjustable forheight and positioning along the bed Remote operator's control station with dual remote electric foot pedals and dual electric push buttons Plexiglass safety guard covering the rear of the machine DFS laser RX light screen safety system mounted on bed SIEMENS programmable controller (PLC) VICKERS hydraulic components Automatic way lubrication system 25 H.P. 3/60/460 volt hydraulic pump motor and electrical controls
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1969 Make - FLAGLER Model - H-3-515 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4800 , Year = 1969 , Make = FLAGLER , Model = H-3-515 |
|
Category: Roll Formers
|
Capacity: 15 Stand FLAGLER Double Edge Roll Former
|
Ad #
4800 |
Year:
| 1969
|
Make:
| FLAGLER
|
Model:
| H-3-515
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | 13'8"L x 36"W x 37.25"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Basic Information
Category Fabricating Sub-Category Roll Formers Manufacturer FLAGER Model H-3-515 Year 1969 Size 15 Stand Item # 3307 -- Full Description 15 Stand FLAGLER Double Edge Roll Former, Model H-3-515
Number of stands: 15 Horizontal center distance of stands: 7" Vertical center distance of shafts: 3-1/2" Diameter of shafts: 1"
EQUIPPEDWITH:
T-A and T2-A tooling on side which forms right angle T-B and T2-B tooling on side which forms double fold with channel (2) Feed plates 36"W x 60"L roller conveyor table 15 H.P. 3/60/220-440 volt V-belt drive to gear drives
Dimensions: 13' 8"L x 36"W x 37-1/4"High Condition: Excellent
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - PULLMAX Model - Major 2 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4772 , Year = , Make = PULLMAX , Model = Major 2 |
|
Category: Notching / Nibbler Machines
|
Capacity: PULLMAX Major 2 Universal Shear and Nibbler
|
Ad #
4772 |
Year:
|
|
Make:
| PULLMAX
|
Model:
| Major 2
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 4,100 lbs
|
Dimension: L x W x H | 87"L x 30" w x 63"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Item # 3298 -- Full Description
PULLMAX Major 2 Universal Shear and Nibbler
Tensile strength of steel 25 Tons 38 Tons 50 Tons
Capacity - Edge cutting: 11/32" 5/16" 1/4" Cutting in solid plate: 5/16" 9/32" 7/32" Nibbling up to: 1/8" 12 Ga. 14 Ga. Cutting speeds: 2 to 16 FPM Number of cuts per minute: 1000 to 2000 Throat depth: 47" Cuts, largest diameter: 45"
EQUIPPED WITH:
Upper and lower toolholders (1) Upper cutter 4 H.P. 3/60/220 volt motor with controls
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - WORTHINGTON/RANSOME Model - 600P |
---|
FOR SALE: Ad # 4888 , Year = , Make = WORTHINGTON/RANSOME , Model = 600P |
|
Category: Welding Positioners
|
Capacity: 60,000 lb. cap. WORTHINGTON/RANSOME Extra Heavy Duty Welding Position.
|
Ad #
4888 |
Year:
|
|
Make:
| WORTHINGTON/RANSOME
|
Model:
| 600P
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 40,000 lbs
|
Dimension: L x W x H | 145"LR x 186.5"FB x 136.5"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
-
Item # 3675 -- Basic Information Category Fabricating Sub-Category Welding Positioners Manufacturer WORTHINGTON / RANSOME Model Type 600P Year 0 Size 60000 Item # 3675 -- Full Description 60,000 lbs. cap. WORTHINGTON / RANSOME Extra Heavy Duty Welding Positioner, Type 600PRetrofitted with new 15 H.P. A/B rotation motor with A/B Speed Pak DC Series B Solid State variable speed drive with Dynamic braking - 1985
Capacity at 12" C.G.: 60,000 lbs. at 24" C.G.: 41,5000 at 36" C.G.: 32,000 lbs. Max. forward tilt: 90Ί Max. backward tilt: 45Ί Total tilt: 135Ί Table size: 84" x 84" Max. height from top of table in horizontal position to floor: 126"
Equipped with:
Infinitely variable rotation speed with dynamic braking 84" x 84" T-slotted table with (2) right angle I-beams on top giving approx. 30" extra support from each corner of table Extended foot support base Twin geared tilt Full remote pendant control 20 H.P. 3/60/220-440 Volt tilt motor 15 H.P. Allen Bradley rotation motor with A/B Speed Pak DC Series B Solid State variable speed drive new 1985 3/60/460 Volt input
Condition: Good
Approx. weight: 40,000 lbs
Overall dimensions: (table horizontal) 145" LR x 186 1/2" FB x 136 1/2" High
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
We found 6 matching ads. Now displaying the remaining 6 ads.
FOR SALE: Year - 1974 Make - BLISS Model - C-75 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4678 , Year = 1974 , Make = BLISS , Model = C-75 |
|
Category: OBI Presses
|
Capacity: 75 Ton C-75 BLISS O.B.I. Flywheel Press
|
Ad #
4678 |
Year:
| 1974
|
Make:
| BLISS
|
Model:
| C-75
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 20,500 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Item # 3262 -- Basic Information
Category Presses Sub-Category Presses, O.B.I. Manufacturer BLISS Model C-75 Year 1974 Size 75 Ton FOB F.O.B. Truck, Wilmington, DE Price $ 24500.00 Item # 3262 -- Full Description 75 Ton C-75 BLISS O.B.I. Flywheel Press, New 1974 Capacity: 75 tons Crankshaft diameter at main bearings: 41/2" Stroke of ram: 4" Standard strokes per minute: 90 Maximum strokes per minute: 120 Minimum strokes per minute (or intermitent stroking only): 83 Shut height on bed: 15" Slide adjustment: 31/2" Slide area: 24"LR x 18" FB Slide bolster area and thickness: 28" L x 18" FB x 11/4" Bed area: 36" LR x 24" FB Bed blster area and thickness: 36" LR x 24" FB x 31/2" Depth of throat, center of ram to face of column: 13" Width of opening through back: 19" STemhole in slide, diameter x depth: 2-5/8" x 3' Distance, bed to gibs: 23-3/4" EQUIPPED WITH: Air friction clutch and brake with pedestal mounted dual electric palm button or remote electric foot pedal control Dual air counterbalances & dual air receiving tanks (one is extra large capacity and sits on the floor on the left side of the press & the other one is mounted on top of the press)Removable slide bolster plate Bed bolster plate (4) Leveling pads Automatic lubrication system 71/2 HP 3/60/230-460 volt drive motor and electrical controls Machine is wired for 230 volt operation. Approximate weight: 20,500 lbs. Condition: Excellent PRICE: F.O.B. Truck,Wilmington,De......................$24,500.00
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1984 Make - VERSON Model - N/A |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4679 , Year = 1984 , Make = VERSON , Model = N/A |
|
Category: OBI Presses
|
Capacity: 150 Ton VERSON Single Geared O.B.I. Press
|
Ad #
4679 |
Year:
| 1984
|
Make:
| VERSON
|
Model:
| N/A
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 42,000 lbs
|
Dimension: L x W x H | 134"Lx60"Wx166"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Item # 3257 -- Basic Information
Category Presses Sub-Category Presses, O.B.I. Manufacturer VERSON Model N/A
Year 1984 Size 150 Ton FOB F.O.B. Truck, Wilmington, DE Price $ 35000.00 Item # 3257 -- Full Description 150 Ton VERSON Single Geared O.B.I. Press, New 1984
Capacity: 150 Tons Stroke: 8" Shut height to bed: 22" Motorized ram adjustment: 6" Depth of gap: 16" Speed: 35 SPM Bed area: 30" x 50" Ram area: 24" x 34" Air cushion specs: Mdl 422-4, S/N 28259 19 tons at 100 P.S.I Travel 4"
EQUIPPED WITH:
Single geared construction Air clutch and brake with surge tank Electric remote foot control Lincoln centro-matic automatic lubrication system w/timer Clutch valve reset Verson brake monitor control Motorized ram adjustment Production counter Air cushion T-Slotted Ram T-Slotted Ram Dual air counter balance of ram 30" x 50" x 4 1/2" thick, bed bolster 24" x 32" x 2" thick, ram bolster 15 H.P. 3/60/220-440 Volt motor and controls
Overall height: 166" Space: 134" x 60" Approx.wt.: 42,000 lbs.
Condition: Excellent
PRICE: F.O.B Truck, Wilmington, De..........................$35,000.00
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1973 Make - NIAGRA Model - M-75 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4677 , Year = 1973 , Make = NIAGRA , Model = M-75 |
|
Category: OBI Presses
|
Capacity: 75 Ton NIAGARA Flywheel O.B.I. Press w/ Air Clutch, ModelM-75
|
Ad #
4677 |
Year:
| 1973
|
Make:
| NIAGRA
|
Model:
| M-75
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Pennsylvania
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Item # 3523 -- Basic Information
Category Presses Sub-Category Presses, O.B.I. Manufacturer NIAGARA Model M-75 Year 1973 Size 75 Ton FOB F.O.B. Truck, Philadelphia, PA Price $ 17500.00 Item # 3523 -- Full Description 75 Ton M-75 NIAGARA Flywheel O.B.I Press with Air Clutch, new 1973
Capacity: 75 tons Speed: 90 SPM Diameter of crankshaft at main bearings: 4 1/2 Diameter of crankshaft at crank pin: 6 3/4" Shut height: 15 3/4" Stroke: 4" Adjustment of slide: 4" Slide area: 17 ?" x 15" Stem hole in slide: 3" diameter x 2 3/4" depth Bed area: 36" x 24" Bed rectangular opening: 18" x 14" Bed circular opening: 15 1/4" diameter Depth of throat: 12 1/2" Distance between gibs: 13 1/2" Width of opening in back: 20" Bolster plate thickness: 3" Distance floor to top of bed: 32"
EQUIPPED WITH: Air clutch and brake Air counter balance of slide Air slide adjustment Bolster plate One-shot lubrication (NEW) Palm button station (NEW) Triad light curtains (NEW) Triad controls with monitor brake (NEW) Air valve (NEW) Remote electric foot control 7 1/2 H.P. 3/60/230-460 volt motor Machine wired for 3/60/460 volt operation
CONDITION: Excellent
Price: F.O.B. Truck, Philadelphia, PA............................$17,500.00
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1979 Make - DANLY Model - OBI-G |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4680 , Year = 1979 , Make = DANLY , Model = OBI-G |
|
Category: OBI Presses
|
Capacity: 150 Ton OBI-G DANLY O.B.I. Single Geared Press
|
Ad #
4680 |
Year:
| 1979
|
Make:
| DANLY
|
Model:
| OBI-G
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 38,100 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Item # 3256 -- Basic Information
Category Presses Sub-Category Presses, O.B.I. Manufacturer DANLY Model OBI-G Serial Number S/N 150604701 Year 1979 Size 150 Ton FOB F.O.B. Truck, Wilmington, DE Price $ 29500.00 Item # 3256 -- Full Description 150 Ton OBI-G DANLY O.B.I. Single Geared Press, New 1979 Capacity: 150 Tons (1/4 above bottom) Flywheel speed: 331 RPM Crankshaft diameter at main bearings: 6 1/16" Crankshaft diameter at crank pin: 9" Speed : 35 SPM Stroke: 8" Slide adjustment: 4" Shut height: 211/2" Bed bolster area and thickness: 50" x 30' x 41/2" Slide bolster area and thickness: 30" x 24" x 2" Air cushion specs: Type AL-20-4, S/N 79604801 Stroke: 4" Tonnage: 15.7 Diameter: 20" EQUIPPED WITH: Air clutch and brake Single geared Air counterbalance Type AL-20-4 Air cushion Hole in bed bolster 10" Dia. Removeable slide bolster Bed bolster Front safety guard (4) Foot pads (2) Air surge tanks Lincoln Centro-Matic Auto.lubrication system Worklight 12" x 12" Mdl.8212 Plessey L.H. air feed/straightener Dual palm buttons with remote electric foot control 15 H.P. 3/60/230-460 volt main drive motor with controls wired for 3/60/230 volt operation Approx. total weight: 38,100 lbs. Condition: Excellent PRICE: F.O.B Truck, Wilmington,De..................$29,500.00
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1981 Make - PACIFIC Model - 150PF-OBS |
---|
FOR SALE: Ad # 4658 , Year = 1981 , Make = PACIFIC , Model = 150PF-OBS |
|
Category: Hydraulic 4 Post Press
|
Capacity: 150 Ton PACIFIC High Speed Hydraulic Press Former, Model 150PF-OBS
|
Ad #
4658 |
Year:
| 1981
|
Make:
| PACIFIC
|
Model:
| 150PF-OBS
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 35,000 lbs
|
Dimension: L x W x H | 59"LR x 126"FB x 134"H |
Machine Location:
|
City: |
On Request
|
State: |
Delaware
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Basic Information
Category Presses Sub-Category Presses, Hydraulic Manufacturer PACIFIC Model 150PF-OBS Year 1981 Size 150 Ton FOB F.O.B. Truck, Wilmigton, DE Price $ 49500.00 Item # 3551 -- Full Description 150 Ton Model 150PF-OBS PACIFIC High Speed Hydraulic Press Former, new 1981 Capacity: 150 tons Maximum stroke length: 10" Open height: 17 1/4" Shut height: 7 1/4" Throat depth: 16" Rapid advance speed: 414 IPM (2) Press speeds: 56 IPM (normal) & 150 IPM (fast) (2) Return speeds: 90 IPM (normal) & 258 IPM (fast) T-Slotted slide bolster: 34" x 24" x 4 1/4" thick Bed area: 49 1/2" x 27 3/4" T-Slotted bed bolster: 50" x 30" x 4 1/2" thick Bed bolster height above floor: 42 3/4" Distance between housings: 31" EQUIPPED WITH: T-Slotted bed and ram bolsters Tonnage control and indicator Hydraulic knock-out control w/manual or automatic ejection Oil heat exchanger Lincoln Centro-Matic lubrication system Adjustable throat safety guards (4) Vibration footpads Redundant control switch Box type slide assembly Ram mounted dual palm buttons Micro stroke adjustment Automatic decompression system Speed selection: combinations of rapid advance/normal press. Rapid advance/fast press or normal press Fast or normal return speed selector Mode selection: off/inch/single stroke manual or automatic return 30 H.P. 3/60/230-460 volt motor and controls Wired for 3/60/230 volt operation CONDITION: Excellent DIMENSIONS: 59"LR x 126 1/2"FB x 134"High APPROX WEIGHT: 35,000 lbs. Price: F.O.B. truck, Wilmington, DE................................$49,500.00
|
Electrical Description |
|
|
|
FOR SALE: Year - 1970 Make - BLISS Model - RGF |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 4653 , Year = 1970 , Make = BLISS , Model = RGF |
|
Category: Gap Frame Presses
|
Capacity: 150 Ton C150 BLISS Single Point Gap Frame Press
|
Ad #
4653 |
Year:
| 1970
|
Make:
| BLISS
|
Model:
| RGF
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 38,000 lbs
|
Dimension: L x W x H | 88"x92"x168"H |
Machine Location:
|
City: |
On Request
|
State: |
Pennsylvania
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Item # 3521 -- Basic Information
Category Presses Sub-Category Presses, Gap Frame Manufacturer BLISS Model RGF Serial Number S/N H62255HP47560 Year 1970 Size 150Ton FOB F.O.B. Truck, Philadelphia, PA Price $ 39500.00 Item # 3521 -- Full Description 150 Ton C150 BLISS Single Point Gap Frame Press with Air Clutch, RGF Series, new 1970 Capacity @ 1/4" above bottom: 150 tons Speed: 40 SPM Crankshaft diameter at main bearings: 6 1/2" Crankshaft diameter at crankpin: 9" Shut height: 20" Stroke: 5" Adjustment of slide: 4 1/2" Slide area: 34" x 24" Stem hole in slide: 3 ?" diameter x 3 3/4: length Bed area: 50" x 30" Bed opening: 21" x 17" Depth of throat: 16 1/2" Width of opening in back: 28" Bolster plate thickness: 4 1/2" Distance bed to gibs: 34 3/4" Distance floor to top of bed: 37" EQUIPPED WITH: Air clutch and brake Single geared Bolster plate Power slide adjustment (NEW) Triad light curtains (NEW) Palm button station (NEW) Triad controls with monitor brake (NEW) Air brake (NEW) Remote electric foot control 15 H.P. 3/60/230-460 volt motor Wired for 3/60/460 volt operation CONDITION: Excellent APPROX WEIGHT: 38, 000 Lbs. PROJECTED FLOOR SPACE: 88" x 92" x 168"High Price: F.O.B. Truck, Philadelphia, PA......................$39,500.00
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|