|
User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 6 matching ads. Now displaying the remaining 6 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6887 | Miscellaneous / Special Lathes |
| 1983 |
WARNER & SWASEY |
#1SC12 |
Good |
sold |
Photo /
More Info. |
| WARNER & SWASEY MODEL #1SC12 AUTOMATIC CHUCKER(M-5020): WARNER & SWASEY MODEL #1SC12 AUTOMATIC CHUCKER(M-5020)
CHUCK DIAMETER (3-JAW HYDRAULIC) .............. 10´´ DIAMETER
TURRET STATIONS ............................... 12
BAR CAPACITY .................................. 2-1/4´´ DIAMETER
MAXIMUM SWING DIAMETER (OVER TURRET BAR) ...... 21-1/4´´
MAXIMUM SWING DIAMETER (OVER TURRET FACE) ..... 12-1/2´´
LONGITUDINAL WORK AREA ........................ 20-7/8´´
LONGITUDINAL STROKE ........................... 8-7/8´´
CROSS STROKE .................................. 6-1/4´´
SPINDLE SPEEDS (EVEN RANGE) ................... 55 TO 2558 RPM
SPINDLE NOSE .................................. 8´´ A-1
THRU HOLE IN SPINDLE .......................... 2-13/16´´
ALLEN-BRADLEY 7300 CONTROL
CHIP CONVEYOR
30 HORSEPOWER MOTOR
HYDRAULIC UNIT
COOLANT PUMP & MOTOR |
|
| Ad # 6472 | General Purpose Lathe 15in. to 23in. swing |
| — |
AMERICAN |
— |
Very Good |
SOLD |
Photo /
More Info. |
| 19´´ X 78´´ AMERICAN ENGINE LATHE: 19´´ X 78´´ AMERICAN ENGINE LATHE:
SWING OVER WAYS ................. 19´´
SWING OVER CROSS SLIDE .......... 11´´
DISTANCE BETWEEN CENTERS ........ 78´´
SPINDLE SPEEDS .................. (27) 30 TO 2000 RPM
FEEDS ........................... (66) .0015 TO .0913
THREADS ......................... (66) 2 TO 120 TPI
DIAMETER OF SPINDLE HOLE ........ 2´´
CHUCK ........................... 15´´ 3 JAW
THREAD DIAL ..................... YES
HARDEN WAYS ..................... YES
FORWARD & REVERSING ............. YES
COOLANT WITH CHIP PANS .......... YES
MOTOR ........................... 15 HORSEPOWER |
|
| Ad # 6474 | General Purpose Lathe 15in. to 23in. swing |
| — |
MONARCH |
612 |
Very Good |
sold |
Photo /
More Info. |
| 20´´ X 78´´ MONARCH ENGINE LATHE: 20´´ X 78´´ MONARCH ENGINE LATHE:
SWING OVER WAYS ............... 21´´
SWING OVER CROSS SLIDE ........ 13´´
DISTANCE BETWEEN CENTERS ...... 78´´
SPINDLE SPEEDS ................ (36) 12 TO 1500 RPM
FEEDS ......................... (66) .0011 TO .0683 IPR
THREADS ....................... (66) 2 TO 120 TPI
DIAMETER OF SPINDLE HOLE ...... 2-1/8´´
CHUCK ......................... 12´´ 4-JAW CHUCK WITH 2 PIECE JAWS
THREAD DIAL ................... YES
FOLLOW REST ................... YES
MOTOR ......................... 15 HORSEPOWER MAIN MOTOR |
|
| Ad # 6473 | General Purpose Lathe 15in. to 23in. swing |
| 1973 |
LEBLOND |
REGAL |
Very Good |
sold |
Photo /
More Info. |
| 19´´ X 126´´ LEBLOND REGAL ENGINE LATHE: 19´´ X 126´´ LEBLOND REGAL ENGINE LATHE:
ACTUAL SWING OVER BED ........... 19-1/4´´
DISTANCE BETWEEN CENTERS ........ 126´´
SWING OVER CROSS SLIDE ..... .... 12-1/4´´
SPINDLE SPEEDS .................. (12) 40-1600
RPM
FEEDS ........................... (48)
.0018-.104 IPR
THREADS ......................... (48) 2-112
TPI
HOLE THRU SPINDLE ............... 1-3/4´´
STEADY REST ..................... 6´´ 3 POINT
CHIP PANS ....................... YES
HARDENED REPLACEABLE BED WAYS ... YES
THREAD DIAL ..................... YES
COOLANT ......................... YES
MOTOR ........................... 15
HORSEPOWER |
|
| Ad # 6470 | General Purpose Lathe 15in. to 23in. swing |
| — |
MONARCH |
— |
Very Good |
sold |
Photo /
More Info. |
| 18´´ X 78´´ MONARCH ENGINE LATHE: 18´´ X 78´´ MONARCH ENGINE LATHE:
ACTUAL SWING OVER WAYS ......... 18´´
SWING OVER THE CROSS SLIDE ..... 11´´
DISTANCE BETWEEN CENTERS ....... 78´´
SPINDLE SPEEDS ................. (16) 17 TO
700 RPM
FEEDS .......................... (66) .0014 TO
.0814 IPR
THREADS ........................ (66) 2 TO 120
TPI
DIAMETER OF SPINDLE HOLE ....... 1 5/8´´
CHUCK .......................... 12´´ 3-JAW
CHUCK
COOL & CHIP PAN ................ YES
STEADY REST .................... 5-1/2´´
THREAD DIAL .................... YES
RAPID TRAVERSE ................. YES
TAPER ATTACHMENT ............... YES |
|
| Ad # 5671 | Tool Room Lathe 8in. to 14in. swing |
| — |
Okuma |
LK |
Excellent |
sold |
Photo /
More Info. |
| Okuma 14" x 32" Gap Bed Engine Lathe: SWING OVER WAYS .................... 14´´
SWING OVER CROSS SLIDE ............ 7-1/2´´
SWING IN GAP ....................... 16-1/2´´
DISTANCE BETWEEN CENTERS ........... 32´´
SPINDLE SPEEDS .............. (12) 50 TO 2000 RPM
LONGITUDINAL FEEDS ...... (32) .0018 TO .0276 IPR
CROSS FEEDS ............. (32) .0009 TO .0134 IPR
INCH THREADS ....................... 4 TO 56 TPI
METRIC THREADS ................. .5 TO 7 MM PITCH
DIAMETER OF 3-JAW CHUCK ............ 10´´
DIAMETER OF SPINDLE HOLE ........... 1´´
CARRIAGE STOP ...................... YES
HARD WAYS .......................... YES
CHIP PAN ........................... YES
SPINDLE MOTOR, HORSEPOWER .......... 5
EQUIPPED WITH TRU-TRACE SINGLE AXIS HYDRAULIC
TRACER:
TRACER SERIAL ...................... 2-1508
TRACER MODEL .......................6107-02
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6461 | Horizontal Boring Mills |
| — |
CINCINNATI GILBERT |
— |
Very Good |
SOLD |
Photo /
More Info. |
| 5´´ CINCINNATI GILBERT TABLE TYPE HORIZONTAL BORING MILL: 5´´ CINCINNATI GILBERT TABLE TYPE HORIZONTAL BORING MILL:
WORKING SURFACE OF TABLE ..................... 92´´ X 53´´
DIAMETER OF SPINDLE .......................... 5´´
SPINDLE SPEEDS ............................... (27) 15 TO 1500 RPM
SADDLE, TABLE & HEAD FEEDS ................... (24) .003 TO .250 IPR
SPINDLE FEEDS ................................ (12) .002 TO .125 IPR
CROSS TABLE TRAVEL ........................... 72´´
SADDLE TRAVEL ................................ 96´´
VERTICAL TRAVEL OF HEAD ...................... 60´´
SPINDLE TRAVEL ............................... 36´´
TAPER IN SPINDLE ............................. #50 NS (POWER DRAW BAR)
EQUIPPED WITH:
HARD REPLACEABLE BED AND SADDLE WAYS
OUTBOARD SUPPORT
PENDANT CONTROL (FOR ALL OPERATIONS)
POWER TABLE
SADDLE AND SPINDLE CLAMPS
25 HORSEPOWER MAIN MOTOR |
|
| Ad # 6451 | Horizontal Boring Mills |
| — |
CERUTI |
AL2 |
Good |
SOLD |
Photo /
More Info. |
| 3´´ CERUTI HORIZONTAL BORING MILL: 3´´ CERUTI HORIZONTAL BORING MILL:
DIAMETER OF SPINDLE .................... 3´´
BUILT IN ROTARY TABLE (POWER)
AREA OF TABLE .......................... 36´´ X 36´´
SPINDLE SPEEDS ......................... (9) 60 TO 1000 RPM
FEEDS .................................. (56) .0027 TO .670 IPR
CROSS TABLE TRAVEL ..................... 30´´
SADDLE TRAVEL .......................... 46´´
VERTICAL TRAVEL ........................ 32´´
SPINDLE TRAVEL ......................... 24´´
TAPER IN SPINDLE ....................... #5MT
MAXIMUM LOAD ON TABLE .................. 6700 LB
BUILT IN 18´´ FACING HEAD ............... 30´´ MAXIMUM DIAMETER
STROKE OF FACING SLIDE ................. 6-7/8´´
RAPID TRAVERSE
3 AXIS DIGITAL READOUT
POWER CLAMPING
|
|
| Ad # 6454 | Horizontal Boring Mills |
| 1953 |
LUCAS |
42B60 |
Very Good |
SOLD |
Photo /
More Info. |
| 4´´ LUCAS TABLE TYPE HORIZONTAL BORING MILL: 4´´ LUCAS TABLE TYPE HORIZONTAL BORING MILL:
4 WAY MACHINE BED MACHINE ................. YES
DIAMETER OF SPINDLE ....................... 4´´
AREA OF TABLE ............................. 74´´ X 48´´
SPINDLE SPEEDS ............................ (26) 9 TO 1200 RPM
FEEDS ..................................... (81) .001 TO 1.038 IPR
TABLE TRAVEL .............................. 60´´
SADDLE TRAVEL ............................. 72´´
VERTICAL TRAVEL ........................... 60´´
SPINDLE TRAVEL ............................ 36´´
MOTOR ..................................... 20 HORSEPOWER MAIN MOTOR
|
|
| Ad # 5668 | Horizontal Boring Mills |
| — |
G & L |
350T |
Excellent |
sold |
Photo /
More Info. |
| Horizonal Boring Mill: DIAMETER OF SPINDLE ................... 5´´
AREA OF TABLE ...................... 74´´ X 48´´
SPINDLE SPEEDS ............ (45) 7-1/2 TO 975 RPM
SPINDLE FEEDS ............ (18) .005 TO .250 IPR
TABLE, SADDLE, VERTICAL FEEDS ..18) 1/2 TO 25 IPM
TAPER IN SPINDLE ...................... 6 MT
TABLE TRAVEL .......................... 60´´
SADDLE TRAVEL ......................... 40´´
VERTICAL TRAVEL OF SPINDLE ............ 60´´
SPINDLE TRAVEL ........................ 32´´
RAPID TRAVERSE ........................ 120 IPM
THREE AXIS DIGITAL READOUTS
OUT BOARD TABLE WAY SUPPORT
SOUTBOARD SPINDLE SUPPORT
25 HORSEPOWER MAIN DRIVE MOTOR
|
|
We found 15 matching ads. Now displaying the remaining 15 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8379 | Radial Drill Press |
| — |
ITALY |
3L |
Good |
SOLD |
Photo /
More Info. |
| 3ft X 8in ITALY RADIAL DRILL: 3' X 8´´ ITALY RADIAL DRILL
AREA OF BASE:38´´ X 25´´
SPINDLE SPEEDS:(12) 60 TO 2000
FEEDS:.004, 008 & .012
SPINDLE TRAVEL:7´´
DIAMETER OF SPINDLE:2-1/2´´
TAPER IN SPINDLE:#3MT
DISTANCE SPINDLE TO FACE OF COLUMN:6" MIN, 36" MAX
SPINDLE TO BASE:48´´ MAXIMUM
TRAVEL OF ARM ON COLUMN:27-1/4´´
TRAVEL OF HEAD ON ARM:26-1/2´´
POWER ARM ELEVATION:YES
MOTOR, HORSEPOWER:2-1/2 |
|
| Ad # 8395 | Radial Drill Press |
| — |
CARLTON |
3A |
Good |
SOLD |
Photo /
More Info. |
| 6ft X 17in CARLTON RADIAL DRILL: 6' X 17´´ CARLTON RADIAL DRILL
WORKING SURFACE OF BASE:78´´ X 48´´
SPINDLE SPEEDS:(36) 12 TO 1200 RPM
SPINDLE FEEDS:(18) .004 TO .125 IPR
TAP LEADS:8 / 11-1/2 / 14 / 18
SPINDLE TRAVEL:18´´
DIAMETER OF SPINDLE:3-3/16´´
TAPER IN SPINDLE:#5 MT
DISTANCE SPINDLE TO BASE:14-1/2´´ MIN / 72´´ MAX
DISTANCE SPINDLE TO COLUMN:13-1/4´´ MIN / 72´´ MAX
POWER COLUMN AND HEAD CLAMPING:YES
POWER HEAD TRAVERSE:YES
POWER ARM ELEVATION:YES
MOTOR:15 HORSEPOWER
|
|
| Ad # 8391 | Radial Drill Press |
| — |
CARLTON |
3A |
Good |
Sold |
Photo /
More Info. |
| 4' X 13´´ : 4' X 13´´ CARLTON RADIAL DRILL
SPINDLE SPEEDS:(36) 15 TO 1500 RPM
FEEDS:(18) .004´´ TO .125´´
SPINDLE TRAVEL:18´´
DIAMETER OF SPINDLE:3-3/16´´
TAPER IN SPINDLE:5MT
DISTANCE CENTER OF SPINDLE TO COLUMN:15´´ MIN, 4' MAX
DISTANCE SPINDLE TO BASE:10-1/2´´ MIN, 5' MAX
TRAVEL OF HEAD ON ARM:2'9´´
TRAVEL OF ARM ON COLUMN:2'7-1/2´´
POWER ELEVATION:YES
POWER COLUMN CLAMP:YES
COOLANT:YES
SPINDLE MOTOR:10 HORSEPOWER
|
|
| Ad # 8380 | Radial Drill Press |
| — |
CINCINNATI |
03 x 09 |
Good |
SOLD |
Photo /
More Info. |
| 3ft X 9in CINCINNATI RADIAL DRILL: 3' X 9´´ CINCINNATI RADIAL DRILL
AREA OF BASE:41´´ X 30´´ EACH
SPINDLE SPEEDS:(9) 75 TO 1500 RPM
FEEDS:(4) .004 TO .020 IPR
SPINDLE TRAVEL:8´´
TAPER IN SPINDLE:#4 MT
DISTANCE SPINDLE TO BASE:52-1/2´´ MAXIMUM
VERTICAL ARM TRAVEL ON COLUMN:27-1/4´´
HORIZONTAL HEAD TRAVEL ON ARM:27-1/4´´
MANUAL COLUMN CLAMP:YES
MANUAL CLAMP OF SPINDLE ON ARM:YES
POWER ELEVATION:YES
MOTOR:3 HORSEPOWER SPINDLE MOTOR |
|
| Ad # 8386 | Radial Drill Press |
| — |
CARLTON |
1A |
Good |
SOLD |
Photo /
More Info. |
| 4ft x 11in CARLTON RADIAL ARM DRILL: USED 4' X 11´´ CARLTON RADIAL ARM DRILL
WORKING SURFACE OF DOUBLE END BASE:52´´ X 36´´
SPINDLE STROKE:12´´
SPINDLE SPEEDS:(12) 120 TO 3000 RPM
FEEDS:(6) .006 TO .025 IPR
SPINDLE TAPER:#4 MT
POWER CLAMPING COLUMN ONLY:YES
MANUAL HEAD TRAVERSE:YES
DOUBLE END BASE:YES
POWER ELEVATION:YES
MOTOR, HORSEPOWER:5 |
|
| Ad # 8393 | Radial Drill Press |
| — |
IKEDA |
RM1500 |
Good |
sold |
Photo /
More Info. |
| 5' X 13´´: 5' X 13´´ IKEDA RADIAL DRILL
DIAMETER OF COLUMN:13-5/8´´
LENGTH OF ARM:5'
DRILLING CAPACITY IN MILD STEEL:1-3/4´´
DRILLING CAPACITY IN CAST IRON:2-1/8´´
TAPPING IN MILD STEEL:1-3/8´´
TAPPING IN CAST IRON:2-1-5/8´´
MORSE TAPER IN SPINDLE:#5
SPINDLE STROKE:12´´
SPINDLE SPEEDS:(12) 30 TO 1440 RPM
SPINDLE FEEDS:(9) .004 TO .021
MAX. DISTANCE COLUMN TO SPINDLE CENTER:60´´
MIN. DISTANCE COLUMN TO SPINDLE CENTER:10-1/2´´
MAX. DISTANCE SPINDLE TO BASE:56´´
MIN. DISTANCE SPINDLE TO BASE:15´´
POWER CLAMPING AND POWER ELEVATION:YES
MOTOR:5 HORSEPOWER MOTOR
ELEVATING MOTOR:1-1/2 HORSEPOWER |
|
| Ad # 8387 | Radial Drill Press |
| 93? |
FOSDICK |
SENSITIVE |
Good |
Sold |
Photo /
More Info. |
| 4' X 12´ : 4' X 12´´ FOSDICK RADIAL DRILL
WORKING SURFACE OF TABLE:42 X 24´´
WORKING SURFACE OF BASE:62´´ X 30´´
SPINDLE SPEEDS:(9) 75 - 1500 RPM
FEEDS:(4) .002 TO .010 IPR
TAPPING CYCLE
SPINDLE TRAVEL:10´´
DIAMETER OF SPINDLE:2-3/4´´
TAPER IN SPINDLE:#4MT
VERTICAL TABLE TRAVEL (POWER):18´´
DISTANCE SPINDLE TO TABLE:0´´ TO 23-1/2´´
DISTANCE SPINDLE TO BASE:35´´ MINIMUM TO 45´´ MAXIMUM
DISTANCE SPINDLE TO COLUMN:9´´ MINIMUM TO 48´´ MAXIMUM
TRAVEL OF HEAD ON COLUMN:39´´
POWER TABLE TRAVERSE
COOLANT
3 HORSEPOWER MAIN MOTOR |
|
| Ad # 8394 | Radial Drill Press |
| 1964 |
CARLTON |
06 X 15 |
Good |
sold |
Photo /
More Info. |
| 6' X 15´´ : 6' X 15´´ CARLTON RADIAL DRILL
AREA OF BASE:74´´ X 42´´
SPINDLE SPEEDS:(36) 15 TO 1500 RPM
FEEDS:(18) .OO4 TO .125 FPM
THREADS:8, 11-1/2, 14, 18
SPINDLE TRAVEL:18´´
TAPER IN SPINDLE:#5 MT
DIAMETER OF SPINDLE:3-1/4´´
DISTANCE SPINDLE TO BASE:26" MINIMUM, 66"
MAXIMUM
DISTANCE SPINDLE TO COLUMN:15" MIN, 72" MAX
MACHINE EQUIPPED WITH:POWER HEAD TRAVERSE,
POWER CLAMPS, POWER ELEVATION AND COOLANT
15 HP SPINDLE DRIVE MOTOR |
|
| Ad # 8384 | Radial Drill Press |
| — |
GIDDINGS & LEWIS |
04 X 09 |
Good |
SOLD |
Photo /
More Info. |
| 4' X 9´´ : 4' X 9´´ GIDDINGS & LEWIS RADIAL DRILL
AREA OF BASE:53´´ X 30´´
SPINDLE SPEEDS:(9) 175 TO 2500 RPM
FEEDS:.004 TO .020 IPR
SPINDLE TRAVEL:10´´
DIAMETER OF SPINDLE:2-1/2´´
TAPER IN SPINDLE:#4 MT
DISTANCE SPINDLE TO BASE:24´´ MIN / 54´´ MAX
DISTANCE SPINDLE TO COLUMN:11´´ MIN / 48´´ MAX
TAPPING CYCLE
POWER ARM ELEVATION
COOLANT
5 HORSEPOWER MOTOR |
|
| Ad # 8382 | Radial Drill Press |
| 2000 |
VICTOR |
Z3032X10/1 |
Good |
Sold |
Photo /
More Info. |
| 4' X 9´´ : 4' X 9´´ VICTOR RADIAL DRILL
SPINDLE SPEEDS:(16) 32 TO 2500 RPM
SPINDLE FEEDS:(8) .003´´ TO .039´´ IPR
STROKE OF SPINDLE:11´´
TAPER IN SPINDLE:#4 MORSE TAPER
DRILLING CAPACITY:1-3/8´´
DISTANCE SPINDLE TO COLUMN:12'' TO 40´´
DISTANCE SPINDLE NOSE TO BASE:8´´ TO 38-3/4´´
T-SLOTTED BOX TABLE:YES
COOLANT:YES
POWER ELEVATION:YES
SPINDLE MOTOR:3 HORSEPOWER
|
|
| Ad # 8392 | Radial Drill Press |
| — |
IKEDA |
RM1300 |
Good |
Sold |
Photo /
More Info. |
| 4' X 13´´ : 4' X 13´´ IKEDA RADIAL DRILL
LENGTH OF ARM:51.25´´
DIAMETER OF COLUMN:13-5/8´´
DRILLING CAPACITY: 2-1/4´´ MILD STEEL; 2-5/8´´ CAST IRON
TAPPING CAPACITY:1-3/4´´ MILD STEEL; 2´´ CAST IRON
SPINDLE SPEEDS:(12) 30-1440 RPM
FEED RANGE:(4) .004-.021 IPR
QUILL TRAVEL:12´´
SPINDLE TAPER:MT#5
VERTICAL SPINDLE TRAVEL:28´´
COLUMN TO BASE DISTANCE:31" MINIMUM TO 59 MAXIMUM
POWER CLAMPING:YES
POWER ELEVATION:YES
RELIANCE VARIABLE SPEED DRIVE:YES
FORWARD/REVERSE TAPPING CONTROL:YES
COOLANT IN BASE:YES
MOTOR:5 HORSEPOWER |
|
| Ad # 8381 | Radial Drill Press |
| — |
CINCINNATI |
03 x 09 |
Good |
sold |
Photo /
More Info. |
| 3' X 9´´ : DIAMETER OF COLUMN:9´´
AREA OF BASE:41´´ X 30´´, T SLOTS
SPINDLE SPEEDS:(18) 55 TO 2250 RPM
FEEDS:(4) .002 TO .010 IPR
SPINDLE TRAVEL:10´´
TAPER IN SPINDLE:#4 MT
DISTANCE SPINDLE TO BASE:53´´ MAXIMUM, 12´´ MINIMUM
VERTICAL ARM TRAVEL ON COLUMN:28´´
DISTANCE COLUMN TO SPINDLE:38´´ MAXIMUM, 14´´ MINIMUM
SWING AWAY AXILLARY TABLE:16´´ X 26.5´´, T SLOTS
HEIGHT OF SWING AWAY TABLE FROM BASE:20´´
MANUAL COLUMN CLAMP:YES
MANUAL CLAMP OF SPINDLE ON ARM:YES
POWER ELEVATION:YES
COOLANT:YES
MOTOR:3 HORSEPOWER, 2 SPEED
|
|
| Ad # 8390 | Radial Drill Press |
| 1974 |
OOYA |
RE- 1225H |
Good |
sold |
Photo /
More Info. |
| 4' x 13": 4'x 13" OOYA RADIAL DRILL
COLUMN DIAMETER:13´´
AREA OF BASE:52´´ X 30´´
SPINDLE SPEEDS:(12) 38 TO 1985 RPM
SPINDLE FEEDS:(6) .003 TO .039 IPR
SPINDLE TRAVEL:12´´
TAPER IN SPINDLE:#5 MT
DIAMETER OF SPINDLE:3´´
DISTANCE SPINDLE TO COLUMN:9´´ MINIMUM / 48´´
MAXIMUM
DISTANCE SPINDLE TO BASE:24´´ MINIMUM / 52´´
MAXIMUM
POWER ELEVATION
POWER CLAMP
COOLANT
5 HORSEPOWER MAIN MOTOR |
|
| Ad # 8389 | Radial Drill Press |
| 1970 |
IKEDA |
RM-1300 |
Good |
SOLD |
Photo /
More Info. |
| 4ft X 13in IKEDA RADIAL DRILL : 4' X 13´´ IKEDA RADIAL DRILL
ARM LENGTH X COLUMN DIAMETER:4' X 13-5/8´´
AREA OF BASE (T-SLOTTED):52´´ X 36´´
SPINDLE SPEEDS:(12) 30 TO 1440 RPM
SPINDLE FEEDS:.004-.008-.013-.021 IPR
SPINDLE DIAMETER:3-3/8´´
SPINDLE STROKE:10´´
SPINDLE TAPER:#5 MT
SPINDLE TO COLUMN:10´´ MIN. / 48´´ MAX.
SPINDLE TO BASE:15´´ MIN. / 49´´ MAX.
BASE HEIGHT:8-1/2´´
COLUMN CLAMPING:POWER
ARM ELEVATION:POWER
HEAD TRAVERSE:POWER
COOLANT:YES
SPINDLE MOTOR:5 HORSEPOWER |
|
| Ad # 8383 | Radial Drill Press |
| — |
CARLTON |
04 x 09 |
Good |
sold |
Photo /
More Info. |
| 4' X 9´´ : 4' X 9´´ CARLTON RADIAL DRILL
AREA OF BASE (T-SLOTTED:53´´ X 30´´
SPINDLE SPEEDS:(9) 109 TO 1500 RPM
SPINDLE FEEDS:.006, .011, .015, .020 IPR
SPINDLE STROKE:9´´
SPINDLE DIAMETER:2-1/2´´
SPINDLE TAPER:#4 MT
SPINDLE TO COLUMN FACE:9´´ MIN, 48´´ MAX
SPINDLE TO BASE:18´´ MIN, 53´´ MAX
TRAVEL OF ARM ON COLUMN:26´´
POWER ELEVATION":YES
COOLANT:YES
MOTOR, HORSEPOWER:3 |
|
We found 7 matching ads. Now displaying the remaining 7 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6465 | Tool & Cutter Grinders |
| — |
CINCINNATI |
2 |
Very Good |
SOLD |
Photo /
More Info. |
| #2 CINCINNATI TOOL & CUTTER GRINDER: #2 CINCINNATI TOOL & CUTTER GRINDER:
AREA OF TABLE ........................... 36´´ X 5-1/4´´
SWING OVER TABLE ........................ 10´´
MAXIMUM CENTER DISTANCE ................. 27´´
LONGITUDINAL TABLE TRAVEL ............... 16´´
CROSS TABLE TRAVEL ...................... 8´´
VERTICAL TRAVEL OF GRINDING SPINDLE ..... 7-1/2´´
GRINDING SPINDLE SPEED .................. 3850 RPM
TABLE SWIVEL ............................ 180 DEGREE
GRINDING SPINDLE SWIVEL ................. 240 DEGREE
GRINDING SPINDLE MOTOR, HORSEPOWER ...... 1 |
|
| Ad # 6450 | Cylindrical Grinders (O.D. & I.D.) |
| 1952 |
CINCINNATI |
— |
Very Good |
sold |
Photo /
More Info. |
| 10´´ X 24´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 10" X 24" CINCINNATI UNIVERSAL CYLINDRICAL
GRINDER:
TYPE ................................ KNEE HOLE
SWING OVER BED - MAXIMUM ............ 11´´
MAXIMUM CENTER DISTANCE............ 24´´
HYDRAULIC TABLE TRAVERSE ............ YES
AUTOMATIC INFEED AT TABLE REVERSAL .. YES
VARIABLE SPEED WORKHEAD ............. YES
GRINDING WHEEL SIZE ................. 12´´ DIA. X
1´´ W
INTERNAL GRINDING ATTACHMENT ........ YES
COOLANT ............................. YES
DRESSER MOUNTED ON TAILSTOCK ........ YES
SWIVEL .............................. TABLE -
WORKHEAD - WHEELHEAD
WHEELHEAD MOTOR ..................... 2
HORSEPOWER
I.D. SPINDLE MOTOR .................. 1
HORSEPOWER
WORKHEAD MOTOR ...................... 1/4
HORSEPOWER |
|
| Ad # 7680 | Cylindrical Grinders (O.D. & I.D.) |
| 1977 |
WARNER & SWASEY |
1U-4 |
Very Good |
SOLD |
Photo /
More Info. |
| 14´´ X 36´´ WARNER & SWASEY UNIVERSAL CYLINDRICAL GRINDER: 14´´ X 36´´ WARNER & SWASEY UNIVERSAL CYLINDRICAL GRINDER
SWING OVER WAYS .................... 14´´
DISTANCE BETWEEN CENTERS ........... 36´´
LONGITUDINAL TABLE TRAVEL .......... 42´´
DIAMETER OF GRINDING WHEEL.......... 14´´
COMBINATION HEAD STOCK
TAPER CONTROL
DROP DOWN INTERNAL GRINDING ATTACHMENT
POWER WORK HEAD
TOOLROOM PRODUCTION DESIGN
1 HORSEPOWER ID MOTOR
5 HORSEPOWER MAIN MOTOR |
|
| Ad # 7658 | Cylindrical Grinders (O.D. & I.D.) |
| — |
RIBON |
RUR-1000 |
Good |
sold |
Photo /
More Info. |
| 11´´ X 40´´ RIBON UNIVERSAL CYLINDRICAL GRINDER: 11´´ X 40´´ RIBON UNIVERSAL CYLINDRICAL GRINDER
MAXIMUM SWING OVER TABLE ............. 11´´
DISTANCE BETWEEN CENTER .............. 40´´
LONGITUDINAL TABLE FEEDS HYDRAULIC ... 1 TO
19
FPM
GRADUATED TABLE SWIVELS .............. +/- 5
DEGREES
AUTOMATIC INFEED AT TABLE REVERSE .... YES
HEAD STOCK SWIVELS ................... 360
DEGREES
POWER WORKHEAD SPEEDS ................
95,155,225,410 RPM
GRINDING WHEEL ....................... 14´´ X
1´´
X 5´´
GRINDING WHEEL SPEEDS ................
1700/2100
RPM
DROP DOWN ID ATTACHMENT .............. YES
GRINDING WHEEL MOTOR ................. 3
HORSEPOWER
HYDRAULIC MOTOR ...................... 1-1/2
HORSEPOWER
DROP DOWN ID MOTOR ................... 1
HORSEPOWER |
|
| Ad # 7661 | Cylindrical Grinders (O.D. & I.D.) |
| 1970 |
CHURCHILL |
PBX |
Good |
SOLD |
Photo /
More Info. |
| 12´´ X 40´´ CHURCHILL UNIVERSAL CYLINDRICAL GRINDER: 12´´ X 40´´ CHURCHILL UNIVERSAL CYLINDRICAL GRINDER
MAXIMUM SWING OVER BED ............ 13´´
DISTANCE BETWEEN CENTERS .......... 40´´
HYDRAULIC TABLE TRAVERSE .......... 3 TO 190 IPM
WORKHEAD SPEEDS ................... 20 TO 400 RPM (VARIABLE)
AUTOMATIC INFEED .................. .0002 TO .0012 (ON DIAMETER)
WHEEL SIZE ........................ 18´´ X 2´´ X 8´´
WHEELHEAD SWIVEL .................. 180 DEGREES
WORKHEAD SWIVEL - 90 DEGREES FROM WHEEL, 90 DEGREES TO WHEEL
VARIABLE SPEED WORKHEADDROP DOWN INTERNAL ATTACHMENT
WAY COVERS
COOLANT
7-1/2 HORSEPOWER WHEELHEAD MOTOR
5 HORSEPOWER HYDRAULIC MOTOR
1-1/2 HORSEPOWER INTERNAL SPINDLE MOTOR |
|
| Ad # 7652 | Cylindrical Grinders (O.D. & I.D.) |
| 1967 |
CINCINNATI |
— |
Good |
SOLD |
Photo /
More Info. |
| 6´´ X 18´´ CINCINNATI PLAIN CYLINDERICAL GRINDER: 6´´ X 18´´ CINCINNATI PLAIN CYLINDERICAL GRINDER
SWING OVER BED....................... 6-3/4´´
DISTANCE BETWEEN CENTERS ............ 18´´
HYDRAULIC TABLE TRAVEL .............. YES
DIAMETER OF GRINDING WHEEL .......... 24´´
WIDTH OF GRINDING WHEEL ............. 2´´
AUTOMATIC INFEED AT TABLE REVERSAL .. YES
AUTO CYCLE .......................... YES
SPARKOUT TIMER ...................... YES
WHEEL HEAD MOTOR, HORSEPOWER ........ 7-1/2
WORK HEAD MOTOR, HORSEPOWER ......... 3/4
HYDRAULIC MOTOR, HORSEPOWER ......... 1 |
|
| Ad # 7653 | Cylindrical Grinders (O.D. & I.D.) |
| 1967 |
CINCINNATI |
10R X 72 |
Good |
sold |
Photo /
More Info. |
| 10´´ X 72´´ CINCINNATI PLAIN CYLINDRICAL GRINDER: 10´´ X 72´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
NOMINAL SWING OVER TABLE .............. 10´´
MAXIMUM SWING SWING OVER TABLE ........ 10-15/16
´´
DISTANCE BETWEEN CENTERS .............. 72´´
STANDARD GRINDING WHEEL ............... 30´´ X 3
´´ X 12´´
GRINDING WHEEL SPEED .................. 830 RPM
WORKHEAD SPEEDS .......................
50/75/113/170 RPM
TABLE TRAVERSE RATES .................. 3 TO 220
IPM
FLOOR TO WORK CENTER .................. 39-1/2´´
BEHIND THE WHEEL PROFILE TRUING ....... YES
AUTOMATIC GAP ELIMINATOR .............. YES
ACRASIZE GAGING ....................... YES
DUAL FEED RATE CONTROL ................ YES
SPARKOUT TIMER ........................ YES
WORKHEAD MOTOR ........................ 1-1/2
HORSEPOWER
GRINDING WHEEL MOTOR .................. 15
HORSEPOWER
elect control
currently not under power but have seen run run.. |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6910 | RAM / Conventional EDM Machines |
| 1992 |
CHARMILLES |
2-LC |
Very Good |
SOLD |
Photo /
More Info. |
| 50 AMP CHARMILLES ELECTRICAL DISCHARGE MACHINE: 50 AMP CHARMILLES ELECTRICAL DISCHARGE MACHINE
AREA OF TABLE ........................... 19-3/4´´ X 14´´
AREA OF RAM ............................. 9-1/4´´ X 6´´
AREA OF TANK ............................ 32´´ X 20´´ X 12´´
DISTANCE BETWEEN TABLE & MACHINING HEAD . 6´´ MIN. TO 21-1/2´´ MAX
MAXIMUM WEIGHT OF WORK PIECE ............ 1250 LBS
MAXIMUM ELECTRODE WEIGHT ................ 130 LBS
LONGITUDINAL TABLE TRAVEL ............... 12´´
CROSS TABLE TRAVEL ...................... 8´´
RAM TRAVEL .............................. 8´´
7 KVA CHARMILLES - EROWA ISOCUT SYSTEM
50 AMPS POWER SUPPLY
3 AXIS SONY DIGITAL READOUTS
COOLANT |
|
| Ad # 6463 | RAM / Conventional EDM Machines |
| — |
EASCO |
GEMINI II |
Good |
sold |
Photo /
More Info. |
| EASCO GEMINI II EDM MACHINE: EASCO GEMINI II EDM MACHINE:
RAM FACES ...................... (2) 6´´ X 11
´´
SIZE OF TANKS .................. (2) 24´´ X 38
´´
AREA OF TABLE (T SLOTTED) ...... 30´´ X 20´´
RAM TRAVEL ..................... 12´´
ADJUSTABLE CROSS RAM TRAVEL .... 16´´
TABLE TRAVEL (IN/OUT) .......... 12´´
RAM FEEDS (SERVO) .............. FINE & COURSE
POWER SUPPLY ................... SPARCATRON 4
POSITION
SERIAL ......................... 10D904/8
MODEL .......................... SPEC 10D/1001
POWER SUPPLY OUTPUT ............ 34 KVA
HOUR ON MACHINE ................ 4391 |
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6531 | Power Squaring Shear (Hydraulic) |
| — |
NIAGARA |
1214 |
Very Good |
SOLD |
Photo /
More Info. |
| 14' X 5/8´´ NIAGARA POWER SQUARING SHEAR: 14' X 5/8´´ NIAGARA POWER SQUARING SHEAR:
CAPACITY .............................. 5/8´´ MILD STEEL
LENGTH OF BLADES ...................... 14'2´´
FRONT OPERATED POWER BACK GAUGES ...... 36´´
HYDRAULIC HOLDDOWNS ................... YES
STROKES PER MINUTE .................... 36
RAKE ADJUSTMENT ....................... 27/64´´ PER FOOT
POWER STOCK FEED ...................... YES
LIGHT BEAM SHEARING ................... YES
SQUARING ARM .......................... 10'
MOTOR, HORSEPOWER ..................... 30 |
|
| Ad # 6523 | Power Squaring Shear (Hydraulic) |
| 1976 |
LODGE & SHIPLEY |
0810 |
Very Good |
SOLD |
Photo /
More Info. |
| 10' X 1/2´´ LODGE & SHIPLEY POWER SQUARING SHEAR: 10' X 1/2´´ LODGE & SHIPLEY POWER SQUARING SHEAR:
CAPACITY .......................... 1/2´´ MILD STEEL
LENGTH OF BLADES .................. 124´´
DEPTH OF GAP ...................... 18´´
STROKE PER MINUTE ................. 40
FRONT OPERATED POWER BACK GAUGES .. 48´´
AIR CLUTCH & BRAKE ................ YES
HYDRAULIC HOLD DOWNS .............. YES
(2) FRONT ARM SUPPORT ............. YES
SQUARING ARM ...................... YES
ELECTRIC FOOT TRIP ................ YES
MOTOR, HORSEPOWER ................. 15 |
|
| Ad # 6521 | Power Squaring Shear (Mechanical) |
| 1973 |
NIAGARA |
910 |
Very Good |
SOLD |
Photo /
More Info. |
| 10' X 3/8´´ NIAGARA POWER SQUARING SHEAR: 10' X 3/8´´ NIAGARA POWER SQUARING SHEAR:
CAPACITY ........................... 3/8´´
LENGTH OF BLADES ................... 122-1/2´´
STROKES PER MINUTE ................. 50
NUMBER OF HOLDDOWNS ................ 22
BACK GAUGE - FRONT OPERATED POWER .. 36´´
SQUARING ARM ....................... 8'
FULL LENGTH FOOT TRIP
UNDER DRIVEN
SINGLE OR CONTINUOUS STROKE
15 HORSEPOWER DRIVE MOTOR |
|
| Ad # 7688 | Power Squaring Shear (Hydraulic) |
| 1988 |
ALLSTEEL |
3/8-10 |
Good |
SOLD |
Photo /
More Info. |
| 10' X 3/8´´ ALLSTEEL HYDRAULIC POWER SQUARING SHEAR: 10' X 3/8´´ ALLSTEEL HYDRAULIC POWER SQUARING SHEAR
CAPACITY ........................... 3/8´´ MILD STEEL
OVERALL LENGTH OF BLADES ........... 122´´
FRONT OPERATED POWER BACK GAUGE .... 48´´
GAP ................................ 15´´
NUMBER OF HYDRAULIC HOLD DOWNS ..... 13
RAKE ANGLE ......................... 7/16´´ PER FOOT
ELECTRIC FOOT TRIP ................. YES
STROKES PER MINUTE ................. 17 FULL STROKE
STROKES PER MINUTE ................. 60 HALF STROKE
AUTOMATIC LUBE ..................... YES
POWER BALL TRANFERS IN TABLE ....... YES
SQUARING ARM ....................... 72´´
FRONT ARM SUPPORTS ................. (2) @ 36´´
FLOOR STANDING ..................... YES
MAIN MOTOR ......................... 40 HORSEPOWER |
|
| Ad # 7690 | Power Squaring Shear (Mechanical) |
| 1977 |
CINCINNATI |
1010 |
Good |
SOLD |
Photo /
More Info. |
| 10' X 10 GA CINCINNATI MODEL 1010 POWER SQUARING SHEAR: 10' X 10 GA CINCINNATI MODEL 1010 POWER SQUARING SHEAR
CAPACITY ......................... 10' X 10 GAUGE
FRONT OPERATED POWER BACK GAUGE .. 48´´
DEPTH OF THROAT .................. 8´´
FRONT TABLE ...................... 20´´HORSEPOWER |
|
We found 18 matching ads. Now displaying the remaining 18 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6902 | Press Brakes (Mechanical) |
| — |
CINCINNATI |
5 |
Very Good |
SOLD |
Photo /
More Info. |
| 135 TON X 8' CINCINNATI CNC MECHANICAL PRESS BRAKE: 135 TON X 8' CINCINNATI CNC MECHANICAL PRESS BRAKE
CAPACITY ........................ 135 TON
OVERALL LENGTH OF BED ........... 96´´
DISTANCE BETWEN HOUSINGS ........ 78´´
STROKE .......................... 3´´
SHUT HEIGHT ..................... 12´´
RAM ADJUSTMENT .................. 5´´
AIR CLUTCH ...................... YES
LIGHT CURTAINS .................. TRIAD MICROGUARD
AUTO LUBE ....................... YES
|
|
| Ad # 6428 | Press Brakes (Mechanical) |
| — |
NIAGARA |
135 x 8 |
Very Good |
SOLD |
Photo /
More Info. |
| 135 TON X 8' NIAGARA PRESS BRAKE: 135 TON X 8' NIAGARA PRESS BRAKE:
CAPACITY ................................ 135 TON
OVERALL LENGTH OF BED & RAM ............. 96''
DISTANCE BETWEEN HOUSING ................ 6'6´´
STROKE .................................. 3´´
DEPTH OF THROAT ......................... 8´´
SHUT HEIGHT ............................. 12´´
RAM ADJUSTMENT .......................... 5´´
ADJUSTMENTSTROKES PER MINUTE (2 SPEED) ............ 30 & 12
AUTO LUBE ............................... YES
MILLED & DRILLED FOR ANGLES ............. YES
AIR ACTUATED MECHANICAL CLUTCH .......... YES
FLOOR STANDING .......................... YES
REMOVABLE BED FLANGE PLATE .............. 96´´ X 30´´
MOTOR ................................... 10 HORSEPOWER |
|
| Ad # 6426 | Press Brakes (Mechanical) |
| — |
CINCINNATI |
4 SERIES X 6 |
Very Good |
SOLD |
Photo /
More Info. |
| 100 TON X 8' CINCINNATI PRESS BRAKE: 100 TON X 8' CINCINNATI PRESS BRAKE:
CAPACITY, NEAR BOTTOM ............ 100 TON
OVERALL LENGTH OF BED AND RAM .... 8'
DISTANCE BETWEEN HOUSINGS ........ 6'6´´
STROKE OF RAM .................... 3´´
POWER RAM ADJUSTMENT ............. 5´´
DIE SPACE, SDAU .................. 12´´
DEPTH OF THROAT .................. 8´´
STROKES PER MINUTE ............... 35
CENTRAL LUBE ..................... YES
AIR ACTUATED MECHANICAL CLUTCH ... YES
ELECTRIC FOOT TRIP ............... YES
POWER RAM ADJUSTMENT ............. YES
MAIN DRIVE MOTOR, HORSEPOWER ..... 7-1/2 |
|
| Ad # 6436 | Press Brakes (Mechanical) |
| 1980 |
CINCINNATI |
#12 AUTO CYCLE |
Very Good |
SOLD |
Photo /
More Info. |
| 300 TON X 16' CINCINNATI PRESS BRAKE: 300 TON X 16' CINCINNATI PRESS BRAKE:
OVERALL LENGTH OF BED AND RAM-16'
DISTANCE BETWEEN HOUSINGS-12'6´´
STROKE OF RAM-4´´
POWER RAM ADJUSTMENT-6´´
MAXIMUM DIE SPACE-12´´
DEPTH OF GAP-10´´
LENGTH OF HORN ON LEFT SIDE OF BED AND RAM-24´´
STROKES PER MINUTE (TWO SPEED RAM)-4.3 / 30
AIR CLUTCH
ELECTRIC FOOT TRIP
AUTOMATIC LUBRICATION
DOUBLE END DRIVE
BULL GEARS RUN IN OIL
20 HORSEPOWER DRIVE MOTOR |
|
| Ad # 6435 | Press Brakes (Mechanical) |
| — |
LODGE & SHIPLEY |
200A10 |
Very Good |
SOLD |
Photo /
More Info. |
| 300 TON X 12' LODGE & SHIPLEY MECHANICAL PRESS BRAKE: 300 TON X 12' LODGE & SHIPLEY MECHANICAL PRESS BRAKE:
TONNAGE ............................ 300 TONS
OVERALL LENGTH OF BED & RAM ........ 12'
DISTANCE BETWEEN HOUSINGS .......... 10'6´´
STROKE ............................. 4´´
SHUT HEIGHT (SDAU) ................. 12´´
RAM ADJUSTMENT (POWER) ............. 5´´
STROKES PER MINUTE ................. 9 & 30
THROAT ............................. 12´´
FLOOR TO BED ....................... 32´´
AIR CLUTCH & BRAKE ................. YES
DUAL PALM BUTTONS .................. YES
ELECTRIC FOOT TRIP ................. YES
BACK-GEARED - TWIN END DRIVE ....... YES
MOTOR .............................. 40 HORSEPOWER |
|
| Ad # 6419 | Press Brakes (Mechanical) |
| 1986 |
WYSONG |
3572 |
Good |
SOLD |
Photo /
More Info. |
| 35 TON X 6' WYSONG PRESS BRAKE: 35 TON X 6' WYSONG PRESS BRAKE:
CAPACITY ............................... 35 TON
BED & RAM, OVERALL ..................... 72´´
DISTANCE BETWEEN HOUSINGS .............. 62´´
STROKE ................................. 3´´
ADJUSTMENT ............................. 3´´
DIE SPACE (SDAU) ....................... 9´´
THROAT ................................. 8-1/2´´
UPPER DIE CLAMPS ....................... YES
LOWER DIE RAIL ......................... YES
FOOT TREADLE ........................... YES
ONE SHOT LUBE .......................... YES
MANUAL RAM ADJUSTMENT .................. YES
MOTOR .................................. 3 HORSEPOWER |
|
| Ad # 6439 | Press Brakes (Mechanical) |
| — |
ENGLE |
BA1010 |
Good |
SOLD |
Photo /
More Info. |
| 10' X 16 GAUGE ENGLE PRESS BRAKE: 10' X 16 GAUGE ENGLE PRESS BRAKE:
CAPACITY ......................... 16 GAUGE
OVERALL LENGHT OF BED ............ 10'
STROKE ........................... 2´´
AREA OF TABLE .................... 127-1/2´´ X 20´´
DISTANCE BETWEEN HOUSINGS ........ 131´´
STROKE PER MINUTE ................ 28
ELECTRIC FOOT TRIP................ YES
MOTOR ............................ 10 HORSEPOWER |
|
| Ad # 6420 | Press Brakes (Mechanical) |
| — |
VERSON |
45 x 6 |
Good |
SOLD |
Photo /
More Info. |
| 45 TON X 6' VERSON BRAKE: 45 TON X 6' VERSON BRAKE:
CAPACITY ............................. 45 TON
OVERALL LENGTH OF BED & RAM .......... 72´´
STROKE ............................... 2-1/2´´
SHUT HEIGHT .......................... 7-1/2´´
RAM ADJUSTMENT ....................... 3-1/2´´
DEPTH OF THROAT ...................... 7´´
STROKE PER MINUTE .................... 40
FLOOR TO TOP OF BED .................. 32´´
ELECTRIC FOOT PEDAL .................. YES
MILLED & DRILL FOR ANGLES ............ YES
MOTOR ................................ 3 HORSEPOWER |
|
| Ad # 6412 | Press Brakes (Hydraulic) |
| 1983 |
BERTSCH |
175 x 10 |
Good |
SOLD |
No Photo /
More Info. |
| 175 TON X 10' BERTSCH HYDRAULIC BRAKE: 175 TON X 10' BERTSCH HYDRAULIC BRAKE:
CAPACITY ......................... 175 TON
OVERALL LENGTH OF BED ............ 10'
DISTANCE BETWEEN HOUSINGS ........ 8'6´´
STROKE ........................... 10´´
OPENING .......................... 17´´ MAXIMUM7´´ MINIMUM
CNC BACKGAUGE .................... YES |
|
| Ad # 6400 | Press Brakes (Hydraulic) |
| 1974 |
PEXTO LVD |
BH12 |
Very Good |
SOLD |
Photo /
More Info. |
| 110 TON X 13' PEXTO LVD HYDRAULIC PRESS BRAKE: 110 TON X 13' PEXTO LVD HYDRAULIC PRESS BRAKE
CAPACITY .................................. 110 TON
OVERALL LENGTH OF BED & RAM ............... 157´´
DISTANCE BETWEEN HOUSING .................. 120´´
STROKE OF RAM ............................. 6´´
OPEN HEIGHT ............................... 13-3/4´´
CLOSED HEIGHT ............................. 7-3/4´´
DEPTH OF THROAT ........................... 9-3/4´´
RAM SPEED ADVANCED ........................ 240 IPM
RAM SPEED PRESSING ........................ 24 IPM
RAM SPEED RETURN .......................... 140 IPM
ELECTRIC FOOT TRIP ........................ YES
MOTOR ..................................... 15 HORSEPOWER |
|
| Ad # 6415 | Press Brakes (Mechanical) |
| — |
DREIS & KRUMP |
335 |
Good |
SOLD |
Photo /
More Info. |
| 25 TON X 6' DREIS & KRUMP POWER PRESS BRAKE: 25 TON X 6' DREIS & KRUMP POWER PRESS BRAKE:
CAPACITY ........................ 25 TON
CAPACITY ........................ 72´´ X 14 GAUGE
OVERALL LENGTH OF BED & RAM ..... 80´´
DISTANCE BETWEEN HOUSING ........ 61´´
STROKE OF RAM ................... 2´´
RAM ADJUSTMENT .................. 3´´
SHUT HEIGHT (SDAU) .............. 7-1/4´´
DEPTH OF THROAT ................. 6´´
MOTOR ........................... 1-1/2 HORSEPOWER |
|
| Ad # 7669 | Press Brakes (Hydraulic) |
| 1983 |
NIAGARA |
HD-175-6-8 |
Good |
SOLD |
Photo /
More Info. |
| 175 TON X 8' NIAGARA MODEL HD-175-6-8 HYDRAULIC PRESS BRAKE: 175 TON X 8' NIAGARA MODEL HD-175-6-8 HYDRAULIC PRESS BRAKE
CAPACITY ............................ 175 TON STROKE .............................. 10´´ OVERALL BED & RAM ................... 96´´ X 24´´
OPEN HEIGHT ......................... 15´´
CLOSED HEIGHT ....................... 5´´
DISTANCE BETWEEN HOUSINGS ........... 6'6´´
PERMANENTLY FLANGED BED & RAM ....... 24´´ WIDE
FULL PRESS CONTROLS ................. YES
AUTOBEND CONTROL - NO BACK GAUGE
FLOOR STANDING |
|
| Ad # 7571 | Press Brakes (Mechanical) |
| 1958 |
DREIS & KRUMP |
612-D |
Good |
SOLD |
Photo /
More Info. |
| 375 TON X 14'6´´ DREIS & KRUMP BRAKE: 375 TON X 14'6´´ DREIS & KRUMP BRAKE
CAPACITY AT BOTTOM OF STROKE ................. 375 TONS
OVERALL LENGTH OF BED AND RAM ................ 14'6´´
DISTANCE BETWEEN HOUSINGS .................... 12'6´´
LENGTH OF STROKE ............................. 6´´
POWER RAM ADJUSTMENT ......................... 6´´
SHUT HEIGHT, SDAU ............................ 18´´
DEPTH OF THROAT .............................. 10´´
STROKES PER MINUTE ........................... 25
18´´ BOLT ON RAM FLANGE ....................... YES
18´´ PERMANENT BED FLANGE ..................... YES
AIR CLUTCH & BRAKE ........................... YES
AUTO LUBRICATION ............................. YES
DUAL PALM BUTTONS ............................ YES
MOTOR ........................................ 20 |
|
| Ad # 7569 | Press Brakes (Mechanical) |
| 1961 |
DREIS & KRUMP |
458-D |
Good |
SOLD |
Photo /
More Info. |
| 175 TON X 10' DREIS & KRUMP MECHANICAL BRAKE: 175 TON X 10' DREIS & KRUMP MECHANICAL BRAKE
CAPACITY AT BOTTOM OF STROKE ................. 175 TONS
OVERALL LENGTH OF BED AND RAM ................ 10´´
DISTANCE BETWEEN HOUSINGS .................... 8'6´´
LENGTH OF STROKE ............................. 3´´
POWER RAM ADJUSTMENT ......................... 5´´
SHUT HEIGHT, SDAU ............................ 12´´
DEPTH OF THROAT .............................. 8´´
STROKES PER MINUTE ........................... 7 & 30
AUTO LUBRICATION ............................. YES
ELECTRIC FOOT PEDAL .......................... YES
MILLED & DRILLED FOR ANGLES .................. YES
MANUAL BACK GAUGE ............................ YES
MOTOR ........................................ 10 |
|
| Ad # 7566 | Press Brakes (Mechanical) |
| — |
DREIS & KRUMP |
338 |
Very Good |
SOLD |
Photo /
More Info. |
| 35 TON X 8' DREIS & KRUMP PRESS BRAKE: 35 TON X 8' DREIS & KRUMP PRESS BRAKE
CAPACITY ............................ 35 TON
BENDING CAPACITY .................... 96´´ X 16 GAUGE
OVERALL LENGTH OF BED AND RAM ....... 96´´
DISTANCE BETWEEN HOUSINGS ........... 61´´
STROKE OF RAM ....................... 2´´
DIE SPACE, SDAU ..................... 7-1/4´´
RAM ADJUSTMENT ...................... 3´´
DEPTH OF THROAT ..................... 6´´
STROKES PER MINUTE .................. 13 TO 39
PASSLINE HEIGHT ..................... 33-3/4´´
BAND BRAKE .......................... YES
FORWARD & REVERSE ................... YES
FULL LENGTH FOOT TRIP ............... YES
MOTOR ............................... 3 HORSEPOWER |
|
| Ad # 7565 | Press Brakes (Mechanical) |
| — |
CINCINNATI |
— |
Very Good |
SOLD |
Photo /
More Info. |
| 90 TON X 10' CINCINNATI PRESS BRAKE: 90 TON X 10' CINCINNATI PRESS BRAKE
CAPACITY ............................. 90 TON
OVERALL LENGTH OF BED ................ 10'
DISTANCE BETWEEN HOUSINGS ............
STROKE OF RAM ........................ 3´´
SHUT HEIGHT, SDAU .................... 12´´
RAM ADJUSTMENT (MOTORIZED) ........... 5´´
DEPTH OF THROAT ...................... 8´´
FULL LENGTH FOOT TREADLE ............. YES
ONE SHOT LUBE ........................ YES
MOTOR ................................ 10 HORSEPOWER |
|
| Ad # 7567 | Press Brakes (Mechanical) |
| 1973 |
NIAGARA |
1B65-10-12 |
Good |
Sold |
Photo /
More Info. |
| 100 TON X 12' NIAGARA MECHANICAL PRESS BRAKE: 100 TON X 12' NIAGARA MECHANICAL PRESS BRAKE
CAPACITY ................. 100 TONS
OVERALL BED & RAM LENGTH ......... 144´´
DISTANCE BETWEEN HOUSINGS ........ 126´´
STROKE ........................... 3´´
SHUT HEIGHT (SDAU) ............... 12´´
ADJUSTMENT (POWER) ............... 5´´
THROAT ........................... 8´´
STROKES PER MINUTE ............... 40
FLOOR TO BED ..................... 32´´
FLOOR STANDING ................... YES
LUBRICATION ...................... ONE SHOT
FULL LENGTH FOOT TRIP ............ YES
MANUAL BACK GAUGE ................ YES
MOTOR ............................ 7-1/2 HORSEPOWER |
|
| Ad # 5756 | Press Brakes (Hydraulic) |
| 1981 |
LVD |
180-BH-10 |
Very Good |
Sold |
Photo /
More Info. |
| 165 TON X 10' LVD HYDRAULIC PRESS BRAKE: CAPACITY .......................... 165 TON
OVERALL LENGTH OF BED AND RAM ..... 10'
DISTANCE BETWEEN HOUSINGS ......... 8'6´´
STROKE OF RAM ..................... 6-7/8´´
MAXIMUM DIE SPACE ................. 16-3/4´´
MINIMUM DIE SPACE ................. 9-7/8´´
DEPTH OF THROAT ................... 9-7/8´´
WIDTH OF BED ...................... 7-3/4´´
DUAL PALM BUTTONS/ELECTRIC FOOT TRIP
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6893 | Benders & Swagers: Pipe and Tube |
| — |
PINES |
110 |
Good |
sold |
Photo /
More Info. |
| 3/4" PINES HYDRAULIC BENDER: 3/4" PINES HYDRAULIC BENDER
CAPACITY STEEL PIPE (SCHEDULE 80)
............. 3/4´´
CAPACITY NON-FERROUS TUBE (Y.P. TO 25K PSI)
... 1-1/2´´ OD. X .065
CAPACITY STEEL TUBE (Y.P. TO 40K PSI)
......... 1-3/8´´ OD X .065
CAPACITY STAINLESS TUBE (Y.P. TO 60K PSI)
..... 1-1/8´´ OD X .065
CAPACITY SQUARE BAR (MILD STEEL)
.............. 1-11/16´´
MAXIMUM RADIUS
................................ 10´´
MAXIMUM BEND ANGLE
............................ 180 DEGREE +
OVERBEND
MAXIMUM TUBE LENGTH OVER MANDREL
.............. 9'11´´
BENDING ROTATION
.............................. COUNTER
CLOCKWISE
AVERAGE BENDING ARM SPEED
..................... 27 RPM
OPERATING PRESSURE
............................ 2000 PSI
8-POSITION DEGREE OF BEND SELECTOR
............ YES
HYDRAULIC MANDREL EXTRACTOR & CLAMPING
........ YES
BIJUR LUBRICATION
............................. YES
MOTOR
......................................... 5
HORSEPOWER |
|
| Ad # 7687 | Benders & Swagers: Pipe and Tube |
| 1966 |
PINES |
14T |
Very Good |
sold |
Photo /
More Info. |
| PINES MODEL 14T VERTICAL HYDRAULIC BENDER: PINES MODEL 14T VERTICAL HYDRAULIC BENDER
CAPACITY .............................. 14
TONS
MILD STEEL TUBING ..................... 1-1/2
´´ X .065´´ WALL
STAINLESS STEEL TUBING ................ 1-1/2
´´ TUBING X .065´´ WALL
SQUARE TUBING - MILD STEEL ............ 1-1/2
´´ TUBING X .065´´ WALL
ROUND BAR TUBING - MILD STEEL ......... 1-1/2
´´
BEND ANGLE W/NORMAL TOOLING ........... 150
DEGREES MAX.
CENTERLINE RADIUS ..................... 5-1/2
´´ MAXIMUM
PRODUCTION SPEED:
SINGLE TUBE ........................... 600
BENDS PER HOUR
TWO TUBES ............................. 1000
BENDS PER HOUR
MANUAL BEND SELECTOR .................. YES
3-BUTTON PEDESTAL CONTROL ............. YES
MOTOR ................................. 20
HORSEPOWER |
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6896 | Benders-Pipe and Tube |
| — |
PINES |
1400 |
Very Good |
SOLD |
Photo /
More Info. |
| 1-1/4´´ PINES #1400 ROTARY HYDRAULIC BAR/TUBE/PIPE BENDER: 1-1/4´´ PINES #1400 ROTARY HYDRAULIC BAR/TUBE/PIPE BENDER
BENDING CAPACITIES ....................... (O.D. X WALL):
SCHEDULE 80 PIPE ......................... 840´´ X .147´´
NON-FERROUS TUBE {25000 PSI Y.P.) ........ 1-1/4´´ X .065´´
STEEL TUBE (40000 PSI Y.P.) .............. 1-1/8´´ X .065´´
STAINLESS TUBE (60000 PSI Y.P.) .......... 7/8´´ X .065´´
MILD STEEL ROUND BAR ..................... 3/4´´
MAXIMUM BENDING RADIUS ................... 8-3/4´´
MAXIMUM BENDING ANGLE .................... 180 DEG. + OVERBEND
MAXIMUM TUBE LENGTH OVER MANDREL ......... 108´´
BENDING ARM SPEED ........................ 24 RPM
4' TABLE EXTENSION ....................... YES
8-POSITION AUTOMATIC DEGREE-OF-BEND SELECTOR
PIVOTING HEAD ALLOWS FOR COUNTER & CLOCKWISE BENDING ROTATION
3 HORSEPOWER HYDRAULIC MOTOR |
|
| Ad # 6895 | Benders-Pipe and Tube |
| 1979 |
PINES |
5T |
Very Good |
SOLD |
Photo /
More Info. |
| 1´´ PINES #5T VERTICAL HYDRAULIC TUBE BENDER: 1´´ PINES #5T VERTICAL HYDRAULIC TUBE BENDER
BENDING CAPACITY:
ONE STEEL TUBE ....................... 1-1/4´´ O.D. X .065´´ WALL
TWO STEEL TUBES ...................... 1´´ O.D. X .065´´ WALL
PRESSURE CAPACITY .................... 5 TONS
MAXIMUM BENDS PER HOUR (2 TUBES) ..... 2000
MAXIMUM BEND ANGLE ................... 100 DEGREES
MAX. CENTERLINE RADIUS (<90 DEGREES) . 4-1/2´´
MIN. CENTERLINE RADIUS ............... 2 TO 3 X TUBE DIAMETER
HEIGHT TO DIES ....................... 40´´
AUTOMATIC INDEXING 10-POSITION TURRET SELECT FOR ANGLES
ELECTRICAL & HYDRAULIC CONTROLS
20 HORSEPOWER HYDRAULIC MOTOR |
|
| Ad # 6894 | Benders-Pipe and Tube |
| 1981 |
PINES |
5T |
Very Good |
SOLD |
Photo /
More Info. |
| 1" PINES #5T VERTICAL HYDRAULIC TUBE BENDER: 1" PINES #5T VERTICAL HYDRAULIC TUBE BENDER
CAPACITY TUBING
NON FERROUS ............................. (2) 1´´ X .072´´
MILD STEEL .............................. (2) 1´´ X .065´´
STAINLESS ............................... (2) 1´´ X .049´´
SQUARE .................................. (2) 7/8´´ X .035´´
ROUND BAR ............................... (2) 5/8´´
SQUARE BAR .............................. (2) 1/2´´
BENDS PER HOUR (MAXIMUM) ................ 2000
MAXIMUM BENDING ANGLE ................... 100 DEGREES
MINIMUM CENTERLINE RADIUS ............... 2 TO 3 X TUBE DIAMETER
MAXIMUM CENTERLINE RADIUS 90 DEGREES .... 4-1/2´´
PUSH BUTTON CONTROLS .................... YES
10-STATION AUTOMATIC BEND SELECTOR ...... YES
TRABON LUBE SYSTEM ...................... YES
DUAL PALM BUTTONS ....................... YES
MOTOR ................................... 20 HORSEPOWER |
|
| Ad # 6897 | Benders-Pipe and Tube |
| 1980 |
PINES |
3T |
Very Good |
SOLD |
Photo /
More Info. |
| PINES MODEL #3T VERTICAL HYDRAULIC BENDER: PINES MODEL #3T VERTICAL HYDRAULIC BENDER
CAPACITY .................................. 3 TONS
NON-FERROUS TUBING (25,000 PSI) ........... 1´´ X .083´´ WALL
MILD STEEL TUBING (40,000 PSI) ............ 1-1/4´´ X .065´´ WALL
STAINLESS STEEL TUBING (60,000 PSI) ....... 1-1/4´´ X .049´´ WALL
SQUARE TUBING, MILD STEEL ................. 1´´ X .065´´
ROUND BAR (MILD STEEL) .................... 3/4´´
SQUARE BAR (MILD STEEL) ................... 9/16´´
CENTERLINE RADIUS ......................... 4-1/2´´ MAXIMUM
BEND ANGLE WITH NORMAL TOOLING ............ 140 DEGREES MAXIMUM
BEND ANGLE WITH SPECIAL TOOLING ........... 165 DEGREES MAXIMUM
PRODUCTION SPEED .......................... 1500 BENDS PER HOUR
AUTOMATIC 10 STATION ANGLE BEND SELECTOR .. YES
KNEE MOUNTED WING DIE ..................... YES
CUSHION CYLINDER .......................... YES
OIL COOLER ................................ YES
MOTOR ..................................... 20 HORSEPOWER |
|
| Ad # 6898 | Benders-Pipe and Tube |
| 1970 |
PINES |
1 |
Very Good |
SOLD |
Photo /
More Info. |
| PINES #1 HORIZONTAL PIPE & TUBE BENDER: PINES #1 HORIZONTAL PIPE & TUBE BENDER
STEEL PIPE, SCHEDULE 80 .................. 1´´
NON-FERROUS TUBE, Y.P. TO 25K PSI ........ 1-1/2´´ X .188´´
STEEL TUBE, Y.P. TO 40K PSI .............. 1-1/2´´ X .109´´
STAINLESS TUBE, Y.P. TO 60K PSI .......... 1-3/8´´ X .065´´
ROUND BAR, MILD STEEL .................... 1-1/8´´
MAXIMUM TUBE LENGTH OVER MANDREL ......... 9'11´´
MAXIMUM RADIUS ........................... 8´´
MAXIMUM BEND ANGLE ....................... 180 + OVERBEND
BENDING ARM SPEED ........................ 17 RPM
OPERATING PRESSURE ....................... 1000 PSI
BENDING ROTATION ......................... COUNTER CLOCKWISE
BIJUR LUBE ............................... YES
DEGREE OF BEND TURRET .................... (8)
HYDRAULIC MANDREL EXTRCTOR ............... YES
MOTOR .................................... 7-1/2 HORSEPOWER |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6467 | Ironworkers |
| — |
HILL ACME |
#3 HYDRAULIC |
Very Good |
SOLD |
Photo /
More Info. |
| 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER: 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER:
PUNCHING CAPACITY .................... 33 TONS
MAXIMUM DIAMETER THROUGH THICKNESS ... 1-1/16´´ X 3/8´´
DIAMETER THROUGH MAXIMUM THICKNESS ... 7/8´´ X 1/2´´
DEPTH OF THROAT ...................... 12-1/2´´
LENGTH OF STROKE ..................... 1´´
SHEARING CAPACITIES:
ANGLES ............................... 4´´ X 4´´ X 1/4´´
ANGLE AT 45 DEGREE ................... 2-1/4´´ X 2-1/4´´ X 1/4´´
FLATS ................................ 6´´ X 1/2´´
LENGTH OF PLATE SHEAR BLADES ......... 9´´
ROUNDS ............................... 1-1/4´´
SQUARES .............................. 1-1/8´´ |
|
| Ad # 6466 | Ironworkers |
| — |
HILL ACME |
3 |
Very Good |
SOLD |
Photo /
More Info. |
| 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER: 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER:
PUNCHING CAPACITY ................... 33 TONS
MAXIMUM DIAMETER THROUGH THICKNESS .. 1-1/16´´ X 3/8´´
DIAMETER THROUGH MAXIMUM THICKNESS .. 7/8´´ X 1/2´´
DEPTH OF THROAT ..................... 12-1/2´´
LENGTH OF STROKE .................... 1´´
SHEARING CAPACITIES:
ANGLES .............................. 4´´ X 4´´ X 1/4´´
ANGLE AT 45 DEGREE .................. 2-1/4´´ X 2-1/4´´ X 1/4´´
FLATS ............................... 6´´ X 1/2´´
LENGTH OF PLATE SHEAR BLADES ........ 9´´
ROUNDS .............................. 1-1/4´´
SQUARES ............................. 1-1/8´´
COPER ON SHEAR END
5 HORSEPOWER MAIN MOTOR |
|
We found 22 matching ads. Now displaying the remaining 22 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6507 | Hydraulic 4 Post Press |
| — |
BEATTY |
— |
Very Good |
SOLD |
Photo /
More Info. |
| 600 TON BEATTY 4 POST HYDRAULIC PRESS: 600 TON BEATTY 4 POST HYDRAULIC PRESS:
DOWNACTING TYPE ................. YES
TYPE ............................ H SPEED
SIZE ............................ 500 A3
CAPACITY ........................ 600 TON
AREA OF BED ..................... 108´´ X 108´´ (T'SLOTTED)
AREA OF RAM ..................... 108´´ X 108´´ (T'SLOTTED)
DISTANCE BETWEEN POSTS .......... 84´´ X 84´´
STROKE .......................... 40´´
OPEN HEIGHT ..................... 60´´
CLOSED HEIGHT ................... 20´´
SPEED ADVANCE ................... 350 IPM
SPEED PRESSING .................. 21 IPM
SPEED RETURN .................... 320 IPM
TIE ROD CONSTRUCTION ............ YES
(2)14´´ MAIN CYLINDERS .......... YES
(2) PULLBACK CYLINDERS .......... YES
OILGEAR HYDRAULICS .............. YES |
|
| Ad # 6502 | Hydraulic 4 Post Press |
| — |
DENISON |
4 STRAIN ROD |
Very Good |
SOLD |
Photo /
More Info. |
| 75 TON DENISON 4 POST HYDRAULIC PRESS: 75 TON DENISON 4 POST HYDRAULIC PRESS:
CAPACITY ..................... 75 TON
STROKE OF RAM ................ 18´´
AREA OF BED .................. 33-1/2´´ X 23-1/2´´
DISTANCE BETWEEN POSTS ....... 30-1/2´´ X 20´´
OPEN HEIGHT .................. 24-1/2´´
CLOSED HEIGHT ................ 6-1/2´´
DIAMETER OF CYCLINDER ........ 5´´
MOTOR ........................ 60 HORSEPOWER |
|
| Ad # 6510 | Hydraulic C-Frame Press |
| — |
DENISON |
AC2-40 |
Very Good |
SOLD |
Photo /
More Info. |
| 40 TON DENISON HYDRAULIC C FRAME PRESS: 40 TON DENISON HYDRAULIC C FRAME PRESS:
ASSEMBLY No. ................. 25-1272-W
CAPACITY ..................... 40 TON
AREA OF BED .................. 24´´ X 21´´
DEPTH OF THROAT .............. 14´´
STROKE ....................... 10´´
DAYLIGHT ..................... 26´´
CLOSED HEIGHT ................ 16 OVER BED
CLOSED HEIGHT OVER BOLSTERS .. 10´´
PISTON ROD ................... 7´´ DIAMETER
WIDTH OF FRAME ............... 28´´
BOLSTER ...................... 21-1/2´´ X 20´´ X 4´´
BOLSTER ...................... 21-1/2´´ X 20´´ X 2-1/2´´
BOLSTER ...................... 16´´ X 16´´ X 1´´
´´C´´ SLOT ON BED ............ 5´´ WIDE
MOTOR, HORSEPOWER ............ 15 |
|
| Ad # 6504 | Hydraulic 4 Post Press |
| — |
WILLIAMS & WHITE |
— |
Very Good |
SOLD |
Photo /
More Info. |
| 150 TON WILLIAMS & WHITE 4-POST HYDRAULIC PRESS: 150 TON WILLIAMS & WHITE 4-POST HYDRAULIC PRESS:
CAPACITY ........................... 150 TONS
STROKE OF RAM ...................... 12´´
OPEN HEIGHT ........................ 22´´
CLOSED HEIGHT ...................... 10´´
RAM PLATEN WORK AREA, T-SLOTTED .... 26´´ X 28´´
OVERALL BED & RAM AREA ............. 36´´ X 28´´
DISTANCE BETWEEN POSTS ............. 26-1/8´´ LR X 18-1/8´´ FB
RAM SPEED RAPID DOWN ............... 350 IPM
RAM SPEED (FULL PRESSURE) .......... 30 IPM
RAM SPEED RAPID RETURN ............. 540 IPM
DIAMETER OF MAIN CYLINDER .......... 11-1/2´´
DIAMETER OF RETURN CYLINDERS (2) ... 2-1/2´´
DIAMETER OF POSTS .................. 3-7/8´´
FLOOR TO BED ....................... 28´´
OPERATING PRESSURE ................. 2640 PSI
TOP MOUNTED HYDRAULICS
20 HORSEPOWER DRIVE MOTOR |
|
| Ad # 6508 | Hydraulic C-Frame Press |
| — |
COLONIAL |
PS35-12 |
Very Good |
SOLD |
Photo /
More Info. |
| 35 TON COLONIAL C-FRAME HYDRAULIC STRAIGHTENING PRESS: 35 TON COLONIAL C-FRAME HYDRAULIC STRAIGHTENING PRESS:
CAPACITY ...................... 35 TON
STROKE OF RAM ................. 12´´
OPEN HEIGHT ................... 15´´
CLOSED HEIGHT ................. 3´´
AREA OF BED ................... 84´´ X 16´´
DEPTH OF THROAT ............... 10´´
RAM SPEED - PRESSING .......... 72 IPM
RAM SPEED - RAPID RETURN ...... 144 IPM
MOTOR ......................... 10 HORSEPOWER |
|
| Ad # 6514 | Hydraulic C-Frame Press |
| 1975 |
DAKE |
25-143 |
Very Good |
sold |
Photo /
More Info. |
| 100 TON DAKE HYDRAULIC C FRAME PRESS: 100 TON DAKE HYDRAULIC C FRAME PRESS:
CAPACITY ........................ 100 TON
BED SIZE ........................ 18´´ X 72´´
PISTON ROD ...................... 6´´ DIAMETER
STROKE .......................... 18´´
DAYLIGHT ........................ 24´´
PRESSING SPEED .................. 17 IPM
RETURN SPEED .................... 38 IPM
THROAT DEPTH .................... 15´´
FLOOR TO TABLE .................. 36´´
TABLE MOUNTED ´´V´´ BLOCKS ...... YES
RAM STRAIGHTENING NOSE PIECE .... YES
MOTOR ........................... 7-1/2 HORSEPOWER |
|
| Ad # 6512 | Hydraulic C-Frame Press |
| — |
DENISON |
LA5OO92-D24 |
Very Good |
SOLD |
Photo /
More Info. |
| 50 TON DENISON HYDRAULIC C FRAME PRESS: 50 TON DENISON HYDRAULIC PRESS:
CAPACITY ...................... 50 TON
STROKE ........................ 15´´
OPEN HEIGHT ................... 24´´
CLOSED HEIGHT ................. 9´´
AREA OF BED ................... 31´´ X 19-1/2´´
RAM SPEEDS ADVANCED ........... 290 IPM
PRESSING SPEED ................ 145 IPM
RETURN SPEED .................. 290 IPM
CYLINDER ROD DIAMETER ......... 4-1/4´´
DEPTH OF THROAT ............... 12´´
DUAL PALM BUTTONS ............. YES
MOTOR ......................... 30 HORSEPOWER |
|
| Ad # 6503 | Hydraulic 4 Post Press |
| 1978 |
DAKE |
18-533 |
Very Good |
SOLD |
Photo /
More Info. |
| 150 TON DAKE 4 POST HYDRAULIC PRESS: 150 TON DAKE 4 POST HYDRAULIC PRESS:
CAPACITY .......................... 150 TONS
STROKE OF RAM ..................... 18´´
OPEN HEIGHT ....................... 34´´
CLOSED HEIGHT ..................... 16´´
HEIGHT FROM FLOOR TO BED .......... 39-1/4´´
DIAMETER OF POST .................. 4-1/2´´
DIAMETER OF RAM CYLINDER .......... 6-1/2´´
RAM SPEED - PRESSING .............. 25 IPM
RAM SPEED - RETURN ................ 57 IPM
DISTANCE BETWEEN POSTS ............ 50´´ X 30´´
AREA OF BED ....................... 50´´ X 43´´
DOWN ACTING RAM ................... YES
4-POST CONSTRUCTION ............... YES
MOTOR ............................. 15 HORSEPOWER |
|
| Ad # 6505 | Hydraulic 4 Post Press |
| — |
HPM |
— |
Very Good |
SOLD |
Photo /
More Info. |
| 150 TON HPM DOUBLE ACTION 4-POST HYDRAULIC PRESS: 150 TON HPM DOUBLE ACTION 4-POST HYDRAULIC PRESS:
CAPACITY ........................ 150 TON
STROKE OF MAIN SLIDE ............ 36´´
STROKE OF CLAMP ................. 18´´
DAYLIGHT ........................ 18´´ MIN. / 52´´ MAX.
AREA OF BED ..................... 36´´ X 36´´
RAM SIZE ........................ 36´´ X 36´´
BOLSTER ......................... 36´´ X 36´´ X 4´´
ADVANCE SPEED ................... 840 IPM
PRESS SPEED ..................... 100 IPM
RETURN SPEED .................... 840 IPM
DIAMETER OF MAIN RAM ............ 11-3/4´´
CUSHION ......................... 18´´ STROKE
AREA OF CUSHION PLATEN .......... 23´´ X 23´´
GLIDE GUIDES RAM
OIL GEAR PUMP
40 HORSEPOWER MAIN MOTOR |
|
| Ad # 6492 | Hydraulic 4 Post Press |
| — |
CLEARING |
H-30-30 |
Very Good |
SOLD |
Photo /
More Info. |
| 30 TON CLEARING 4-POST HYDRAULIC TRIM PRESS: 30 TON CLEARING 4-POST HYDRAULIC TRIM PRESS:
DOWN ACTING
CAPACITY ........................ 30 TON
STROKE OF SLIDE ................. 9´´
OPEN HEIGHT - OVER BED .......... 22´´
CLOSED HEIGHT - OVER BED ........ 13´´
AREA OF BED (OVERALL) ........... 36´´ X 19´´
AREA OF RAM ..................... 32-1/2´´ X 15-1/2´´
DISTANCE BETWEEN POSTS .......... 31´´ X 14´´
HOLE IN BED ..................... 24´´ X 12´´
DIAMETER OF RAM ................. 5´´
DIAMETER OF POSTS ............... 2´´
SELF CONTAINED HYDRAULICS
OILGEAR HYDRAULIC PUMP
7-1/2 HORSEPOWER MAIN MOTOR |
|
| Ad # 6489 | Hydraulic 4 Post Press |
| — |
HYDREL |
HFP-63 |
Very Good |
SOLD |
Photo /
More Info. |
| 100 TON HYDREL 4-POST HYDRAULIC FINE BLANKING PRESS: 100 TON HYDREL 4-POST HYDRAULIC FINE BLANKING PRESS:
EFFECTIVE CUTTING PRESSURE ........ 63 TONS
BLANK HOLDING PRESSURE ............ 20 TONS
COUNTER PRESSURE, EJECTOR ......... .5 TO 10 TONS
TOTAL BUILT-IN PRESSURE ........... 95 TONS
RAM STROKE, ADJUSTABLE ............ .400´´ TO 3.300´´
CUTTING STROKE, MAXIMUM ........... .800´´
COUNTER PRESSURE STROKE, EJECTOR .. 2.375´´
STROKES PER MINUTE, MAXIMUM ....... 90 TO 100
TOOL HEIGHT RANGE ................. 4.540´´ TO 7.680´´
UPPER TOOL FIXATION SURFACE DIA. .. 11.800´´
LOWER TOOL FIXATION SURFACE AREA .. 11.800´´ X 19.700´´
DIST. BETWEEN COLUMNS,F-B & L-R ... 12.2´´
POSTS DIAMETER .................... 3-1/2´´
AIR PRESSURE, MAXIMUM ............. 86 PSI
AUTO CYCLE / HAND CYCLE
T-SLOTTED LOWER TOOL FIXATION AREA
28 HORSEPOWER HYDRAULIC MOTOR |
|
| Ad # 6490 | Hydraulic 4 Post Press |
| — |
HYDREL |
HFP-63 |
Very Good |
SOLD |
Photo /
More Info. |
| 100 TON HYDREL 4-POST HYDRAULIC FINE BLANKING PRESS: 100 TON HYDREL 4-POST HYDRAULIC FINE BLANKING PRESS:
REBUILT IN 1996 - UNUSED SINCE
EFFECTIVE CUTTING PRESSURE .............. 63 TONS
BLANK HOLDING PRESSURE .................. 20 TONS
COUNTER PRESSURE - EJECTOR .............. .5 TO 10 TONS
TOTAL BUILT-IN PRESSURE ................. 95 TONS
RAM STROKE - ADJUSTABLE ................. .440´´ TO 3.300´´
CUTTING STROKE - MAXIMUM ................ .800´´
COUNTER PRESSURE STROKE - EJECTOR ....... 2.375´´
STROKES PER MINUTE - MAXIMUM ............ 90 TO 100
TOOL HEIGHT RANGE ....................... 4.540´´ TO 7.680´´
UPPER TOOL FIXATION SURFACE DIAMETER .... 11.800´´
LOWER TOOL FIXATION SURFACE AREA ........ 11.800´´ X 19.700´´
DISTANCE BETWEEN COLUMNS - F-B & L-R .... 12.2´´
DIAMETER OF POSTS ....................... 3-1/2´´
AIR PRESSURE - MAXIMUM .................. 86 PSI
AUTO CYCLE / HAND CYCLE
T-SLOTTED LOWER TOOL FIXATION AREA
28 HORSEPOWER HYDRAULIC MOTOR |
|
| Ad # 8410 | Hydraulic 4 Post Press |
| — |
Dake |
27551 |
Good |
sold |
Photo /
More Info. |
| 150 Ton: 150 TON DAKE 4 POST HYDRAULIC PRESS
CAPACITY:150 TON
AREA OF BED:44´´ L-R X 38´´ F-B
DISTANCE BETWEEN THE POST:38´´ L-R X 25´´ F-B
STROKE OF RAM:10´´
OPEN HEIGHT:15´´
CLOSED HEIGHT:5´´
RAM SPEEDS (ADVANCE):175 IPM
PRESSING SPEED:33 IPM
BREAKAWAY SPEEDS:75 IPM
RETURN SPEED:405 IPM
PASS LINE HEIGHT:36´´
ELECTRIC FOOT TRIP:YES
RUN/JOG CONTROLS:YES
MOTOR:25 HORSEPOWER
|
|
| Ad # 8409 | Hydraulic 4 Post Press |
| — |
CLEARING |
H-150-0 |
Good |
SOLD |
Photo /
More Info. |
| 150 Ton: 150 TON CLEARING HYDRAULIC 4-POST PRESS
CAPACITY:150 TON
STROKE OF SLIDE:48´´
OPEN HEIGHT:64´´
CLOSED HEIGHT:16´´
AREA OF BED:30´´ X 30´´
AREA OF SLIDE:30´´ X 30´´
MAXIMUM HYDRAULIC PRESSURE:2450 PSI
PULL BACK CYLINDERS IN SIDE HOUSINGS
DUAL PALM BUTTONS |
|
| Ad # 8407 | Hydraulic 4 Post Press |
| — |
HPM |
0100 |
Good |
Sold |
Photo /
More Info. |
| 100 Ton: 100 TON HPM 4-POST HYDRAULIC PRESS
CAPACITY:100 TONS
STROKE OF RAM:12´´
MINIMUM DAYLIGHT:24´´
MAXIMUM DAYLIGHT:36´´
DISTANCE BETWEEN POSTS:19´´ LR X 7´´ FB
DIAMETER OF MAIN CYLINDER:8´´
AUXILIARY HOLD CYLINDER:10 TON CAPACITY W/24´´ STROKE
DIAMETER OF PULLBACK CYLINDERS (2):6´´
SHUTTLE TABLE
HAND LEVER CONTROL
10 HORSEPOWER HYDRAULIC MOTOR |
|
| Ad # 8406 | Hydraulic 4 Post Press |
| — |
HPM |
— |
Good |
Sold |
Photo /
More Info. |
| 100 Ton: 100 TON HPM 4-POST HYDRAULIC PRESS
CAPACITY:100 TONS
STROKE OF RAM:12´´
MINIMUM DAYLIGHT:24´´
MAXIMUM DAYLIGHT:36´´
DISTANCE BETWEEN POSTS:19´´ LR X 7´´ FB
DIAMETER OF MAIN CYLINDER ............ 8´´
AUXILIARY HOLD CYLINDER:10 TON CAPACITY W/24´´ STROKE
DIAMETER OF PULLBACK CYLINDERS (2):6´´
SHUTTLE TABLE
HAND LEVER CONTROL
10 HORSEPOWER HYDRAULIC MOTOR |
|
| Ad # 8411 | Hydraulic 4 Post Press |
| — |
HPM |
0150 |
Good |
SOLD |
No Photo /
More Info. |
| 150 Ton: 150 TON HPM DOUBLE ACTION 4-POST HYDRAULIC PRESS
CAPACITY:150 TON
STROKE OF MAIN SLIDE:36´´
STROKE OF CLAMP:18´´
DAYLIGHT:18´´ MIN. / 52´´ MAX.
AREA OF BED:36´´ X 36´´
RAM SIZE:36´´ X 36´´
BOLSTER:36´´ X 36´´ X 4´´
ADVANCE SPEED:840 IPM
PRESS SPEED:100 IPM
RETURN SPEED:840 IPM
DIAMETER OF MAIN RAM:11-3/4´´
CUSHION:18´´ STROKE
AREA OF CUSHION PLATEN:23´´ X 23´´
GLIDE GUIDES RAM
OIL GEAR PUMP
40 HORSEPOWER MAIN MOTOR |
|
| Ad # 8404 | Hydraulic 4 Post Press |
| — |
DENISON |
4P-050-B1-S-42-24-39X-D99-3 |
Good |
Sold |
Photo /
More Info. |
| 50 Ton: 50 TON DENISON 4-POST HYDRAULIC PRESS
CAPACITY:50 TON
STROKE:24´´
OPEN HEIGHT:42´´
CLOSED HEIGHT:18´´
AREA OF LOWER PLATEN:34´´ X 24´´
AREA OF UPPER PLATEN:34´´ X 24´´
DISTANCE BETWEEN POSTS:24´´ X 14´´
DIAMETER OF CYLINDER ROD:4´´
DIAMETER OF POSTS:3-1/2´´
MAXIMUM P S I:3540
DUAL PALM BUTTONS:YES
HYDRAULIC MOTOR, HORSEPOWER:60
|
|
| Ad # 8408 | Hydraulic 4 Post Press |
| 1978 |
Dake |
18-533 |
Good |
SOLD |
Photo /
More Info. |
| 150 Ton: 150 TON DAKE 4 POST HYDRAULIC PRESS
CAPACITY:150 TONS
STROKE OF RAM:18´´
OPEN HEIGHT:34´´
CLOSED HEIGHT:16´´
HEIGHT FROM FLOOR TO BED:39-1/4´´
DIAMETER OF POST:4-1/2´´
DIAMETER OF RAM CYLINDER:6-1/2´´
RAM SPEED - PRESSING:25 IPM
RAM SPEED - RETURN:57 IPM
DISTANCE BETWEEN POSTS:50´´ X 30´´
AREA OF BED:50´´ X 43´´
DOWN ACTING RAM:YES
4-POST CONSTRUCTION:YES
MOTOR:15 HORSEPOWER |
|
| Ad # 8413 | Hydraulic H-Frame Press |
| — |
Beatty |
0600 |
Good |
Sold |
Photo /
More Info. |
| 600 Ton: 600 TON BEATTY 4 POST HYDRAULIC PRESS
DOWNACTING TYPE:YES
TYPE:H SPEED
SIZE:500 A3
CAPACITY:600 TON
AREA OF BED:108´´ X 108´´(T'SLOTTED)
AREA OF RAM:108´´ X 108´´(T'SLOTTED)
DISTANCE BETWEEN POSTS:84´´ X 84´´
STROKE:40´´
OPEN HEIGHT:60´´
CLOSED HEIGHT:20´´
SPEED ADVANCE:350 IPM
SPEED PRESSING:21 IPM
SPEED RETURN:320 IPM
TIE ROD CONSTRUCTION:YES
(2) 14´´ MAIN CYLINDERS:YES
(2) PULLBACK CYLINDERS:YES
OILGEAR HYDRAULICS:YES |
|
| Ad # 8403 | Hydraulic 4 Post Press |
| — |
CLEARING |
H-30-30 |
Good |
SOLD |
Photo /
More Info. |
| 30 TON CLEARING 4-POST HYDRAULIC TRIM PRESS: 30 TON CLEARING 4-POST HYDRAULIC TRIM PRESS
DOWN ACTING
CAPACITY:30 TON
STROKE OF SLIDE:9´´
OPEN HEIGHT - OVER BED:22´´
CLOSED HEIGHT - OVER BED:13´´
AREA OF BED (OVERALL):36´´ X 19´´
AREA OF RAM:32-1/2´´ X 15-1/2´´
DISTANCE BETWEEN POSTS:31´´ X 14´´
HOLE IN BED:24´´ X 12´´
DIAMETER OF RAM:5´´
DIAMETER OF POSTS:2´´
SELF CONTAINED HYDRAULICS
OILGEAR HYDRAULIC PUMP
7-1/2 HORSEPOWER MAIN MOTOR
|
|
| Ad # 8412 | Hydraulic 4 Post Press |
| 1993 |
Hepburn |
0200 |
Good |
SOLD |
Photo /
More Info. |
| 200 Ton: 200 TON HEPBURN 4-POST HYDRAULIC MOLDING PRESS
CAPACITY:200 TON
STRIPPING CAPACITY:30 TON
STROKE OF RAM:20´´
MAXIMUM DAYLIGHT:44´´
MINIMUM SHUT HEIGHT:24´´
AREA OF PLATEN:126´´ X 78´´
DISTANCE BETWEEN POSTS:108´´ X 60´´
RAPID ADVANCE SPEED:430 IPM
PRESSING/STRIPPING SPEED:3.6 TO 36 IPM
FAST RETURN SPEED:400 IPM
FLOOR MOUNTED (NO PIT REQUIRED):YES
PUMP MOTOR, HORSEPOWER:50 |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6909 | Comparators |
| — |
JONES & LAMSON |
EPIC-250 |
Very Good |
SOLD |
Photo /
More Info. |
| 50´´ JONES & LAMSON MODEL #EPIC-250 COMPARATOR: 50´´ JONES & LAMSON MODEL #EPIC-250 COMPARATOR
SERIAL .................... E-52043
YEAR ...................... 1980
MODEL ..................... EPIC-250
DIAMETER OF SCREEN ........ 50´´
HORIZONTAL MEASURING ...... 12´´ POWER OPERATED WITH ELECTRONIC DIGITAL DISPLAY TO 0.00005´´ (DIGITAL)
VERTICAL MEASURING ........ 9´´ POWER OPERATED WITH ELECTRONIC DIGITAL DISPLAY TO 0.00005´´ (DIGITAL)
ANGLE MEASURING ........... 360 DEGREE ROTATION - ONE MINUTE VERNIER
FOCUS ..................... 3´´
HELIX ROTATION ............ 15 DEGREE LEFT & RIGHT
LENS MOUNT ................ 6 POSITION LENS SELECTOR
LENS CENTERLINE TO TABLE:
WITH HELIX ................ 3´´ MIN. / 13´´ MAX.
WITHOUT HELIX ............. 5´´ MIN. / 14´´ MAX.
MATCHED LENS DATA ......... 31.25X - 1.6 /50X - 1´´/ 62.5X - .8´´ / 100X - .5´´
WORK TABLE SURFACE ........ 8-1/2´´ X 32´´ |
|
| Ad # 6907 | Comparators |
| — |
NIKON |
5A |
Very Good |
SOLD |
Photo /
More Info. |
| 16´´ NIKON COMPARATOR: 16´´ NIKON COMPARATOR
DIAMETER OF SCREEN ................. 16´´
AREA OF TABLE ...................... 20´´ X 8´´
LONGITUDINAL TABLE TRAVEL .......... 12´´
CROSS TABLE TRAVEL ................. 5´´
VERTICAL TABLE TRAVEL .............. 10´´
LENS WITH MACHINE .................. 10X, 20X, 50, 100X
POWER VERTICAL TABLE TRAVEL ........ YES
RAPID VERTICAL TRAVEL .............. YES
SIDE ILLUMINATION .................. YES
STORAGE CABINET BUILT IN MACHINE ... YES |
|
We found 8 matching ads. Now displaying the remaining 8 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6901 | Bead & Shot Blasters |
| 1980 |
PANGBORN |
ES-1745 ROTO-BLAST |
Very Good |
SOLD |
Photo /
More Info. |
| PANGBORN ROTO-BLAST PASS-THRU BLAST CLEANING MACHINE: PANGBORN ROTO-BLAST PASS-THRU BLAST CLEANING MACHINE
NUMBER OF SHOT WHEELS ............. 1
SHOT WHEEL MOTOR .................. 10 HORSEPOWER
SHOT RECLAMATION SYSTEM
|
|
| Ad # 6911 | Vibratory Equipment |
| — |
ROTO FINISH |
ST12 |
Very Good |
SOLD |
Photo /
More Info. |
| 12 CUBIC FOOT ROTO FINISH BOWL TYPE VIBRATORY FINISHER: 12 CUBIC FOOT ROTO FINISH BOWL TYPE VIBRATORY FINISHER
CAPACITY ........................... 12 CU FT
DIAMETER OF BOWL ................... 60´´
WIDTH OF PROCESS CHANNEL ........... 12´´
DEPTH OF PROCESS CHANNEL ........... 20´´
PNEUMATIC PARTS DAM ................ YES
WIDTH OF PARTS EXIT SHOOT .......... 12´´
HEIGHT OF PARTS EXIT SHOOT ......... 7´´
MEDIA SEPARATION SCREEN ............ YES
SLURRY DRAIN ....................... YES
CYCLE TIMER ........................ YES
SLURRY TANK AND PUMP ............... YES |
|
| Ad # 8402 | Vibratory Equipment |
| — |
ALMCO |
V-3 |
Good |
sold |
Photo /
More Info. |
| 2-1/2 CUBIC FT: 2-1/2 CUBIC FT ALMCO VIBRATING FINISHING MACHINE
TUB CAPACITY:2-1/2 CUBIC FOOT
LENGTH OF TUB:15´´
WIDTH OF TUB:16´´
SIZE OF DISCHARGE SHOOT:6´´ WIDE X 4´´ HIGH
PNEUMATIC DISCHARGE SHOOT DOOR:YES
BOTTOM DRAIN:YES
URETHANE LINED:YES
VARIABLE SPEED:YES
REMOVABLE TUB DIVIDER:YES
CYCLE TIMER:YES
MOTOR, HORSEPOWER:1 |
|
| Ad # 8397 | Vibratory Equipment |
| — |
ROSEMONT |
RF-14 |
Good |
sold |
Photo /
More Info. |
| 12 CU/FT: 12 CU/FT ROSEMONT BOWL TYPE VIBRATORY FINISHER
CUBIC FEET CAPACITY:12
DIAMETER OF BOWL:60´´
WIDTH OF PROCESS CHANNEL:12´´
DEPTH OF PROCESS CHANNEL:15´´
WIDTH OF EXIT SHOOT:12´´
PNEUMATIC PARTS DAM:YES
URETHANE LINED:YES
PROCESS TIMER:YES
UNLOAD TIMER:YES
SLURRY PUMP, HORSEPOWER:1/2
VIBRATORY MOTOR, HORSEPOWER:5 |
|
| Ad # 8400 | Vibratory Equipment |
| 2001 |
ROTO Finish |
5723 |
Good |
Sold |
Photo /
More Info. |
| 4 CUBIC FT ROTO FINISH VIBRATORY FINISHER: 4 CUBIC FT ROTO FINISH VIBRATORY FINISHER
CAPACITY:4 CUBIC FT
DIAMETER OF BOWL:40´´
DEPTH OF BOWL:18´´
LINING:POLYURETHANE
VARIABLE SPEEDS:YES
PARTS DAM:YES
PARTS SEPARATOR:YES
DRAIN:YES
COOLANT TANK:YES
SPIRAL SPIN:YES
CYCLE TIMER:YES
MOTOR:5 HORSEPOWER
|
|
| Ad # 8399 | Vibratory Equipment |
| 1970 |
WHEELABRATOR |
2233 |
Good |
sold |
Photo /
More Info. |
| 10 CU FT : 10 CU FT WHEELABRATOR VIBRATORY FINISHER
HOPPER CAPACITY:10 CU.FT.
HOPPER DIMENSIONS (W X L X D:22´´ X 33´´ X 26´´
VIBRATIONS PER MINUTE METER RANGE:0-2500
FLOOR TO TOP OF HOPPER:58´´
POLYURETHANE LINER IN VERY GOOD CONDITION
MEDIA/PARTS SEPARATING TANK
COOLANT
CYCLE TIMER
FORWARD/REVERSE BUTTONS
SKID MOUNTED |
|
| Ad # 8396 | Vibratory Equipment |
| — |
ROTO |
ST-20M |
Good |
SOLD |
Photo /
More Info. |
| 20 CU FT ROTO FINISH VIBRATORY FINISHER: 20 CU FT ROTO FINISH VIBRATORY FINISHER
CUBIC FEET CAPACITY:20
DIAMETER OR BOWL:72´´
WIDTH OF CHANNEL:14´´
PARTS DAM:YES
DRAIN HOLE:YES
VARIABLE SPEED CONTROL:YES |
|
| Ad # 8398 | Vibratory Equipment |
| — |
ROTO Finish |
ST12 |
Good |
SOLD |
Photo /
More Info. |
| 12 CUBIC FOOT : 12 CUBIC FOOT ROTO FINISH BOWL TYPE VIBRATORY FINISHER
CAPACITY:12 CU FT
DIAMETER OF BOWL:60´´
WIDTH OF PROCESS CHANNEL:12´´
DEPTH OF PROCESS CHANNEL:20´´
PNEUMATIC PARTS DAM:YES
WIDTH OF PARTS EXIT SHOOT:12´´
HEIGHT OF PARTS EXIT SHOOT:7´´
MEDIA SEPARATION SCREEN:YES
SLURRY DRAIN:YES
CYCLE TIMER:YES
SLURRY TANK AND PUMP:YES
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
