User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14491 | Turning Center 4 - 10 in. chuck |
1997 |
Mazak |
QT-30 |
Good |
sold |
Photo /
More Info. |
10" check: Mazak QT-30 cnc lathe
10" chuck dia
mazatrol T plus control
programmable tail stock
chip conveyor
std specs below--please verify
Specification Description
MAXIMIM SWING OVER BED: 20"
MAXIMIM SWING OVER CARRIAGE: 15.75"
MAXIMUM TURNING DIAMETER: 12.5"
MAXIMUM TURNING LENGTH: 39.4"
CHUCK SIZE: 10"
X-AXIS TRAVEL/CROSS: 7.8"
Z-AXIS TRAVEL/LONGITUDINAL: 40.1"
X-AXIS RAPID TRAVERSE RATE: 780 IPM
Y-AXIS RAPID TRAVERSE RATE: 980 IPM
NUMBER OF TURRETS: 1
TURRET TOOLING STATIONS: 16
SPINDLE SPEEDS: 40-3300 RPM
SPINDLE NOSE: A2-8
SPINDLE BORE DIAMETER: 3.15"
SPINDLE MOTOR: 30 HP
NET WEIGHT: (APPROX.) 15000 LBS
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14487 | Vertical Machining Centers (VMC) |
1995 |
Clausing/ Kondia |
B500 |
Good |
sold |
Photo /
More Info. |
travels: : X-22.0 ",Y:15",Z:15": Clausing VMC # B500
table size: 27.5" x 14"
main spindle motor: 3.7KW
travels: : X-22.0 ",Y:15",Z:15"
table load 750lbs
taper cat 40
spindle rpm: 100-6000rpm variable
coolant
tool changer: 16
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14490 | Surface Grinders |
80's |
Arne/Consolidated |
KG-S |
Good |
sold |
Photo /
More Info. |
knife grinder: 79" x 6.5" max: Arne # KGS knife/blade grinder
chuck size: 81" x 8"
max grinding surface 79" x 6.5"
semi-automatic with manual downfeed
max blade length of blades to grind:
79"
max width of blades ground: 5.5",can change
wheel and get 6.5" width max thickness of
part to be ground: 1"
feed carriage speed: 12.5ft/min
speed of grinding wheel:
1680rpm
motor: 3/4 HP,1680rpm
tilt table +- 45 degrees
coolant pump
mounted wheel dresser
spindle uses a 6"ODx4"ID x 3-1/8" cup
wheel type 2003,A9946,K9V
have manual on PDF for review
technical description: this machine
was
developed for precision grinding of
cutting knives and other parts which can fit in
the clamping area. machine has 3 motors:
grinding wheel drive motor,1 for power carriage
drive traversing and another for coolant
motor.the grinding wheel is assembled directly
onto tthe extended shaft of the wheel motorthats
mounted to the traversing feed
carriage.traversing of the feed carriage is
automatic with the manual setting of the
reversing stops,the drive transmission frpom the
carriage feed motor by v belt to worm gear
box,then to drive sprocket and roller chain.the
grinding wheel is lowered to the knife(or
part)to be ground in a vertical direction with a
manual handwheel,the vernier scale is graduated
into 0.025mm or 0.001" increments.
The grinding angle is set in
rference to horizontal 0deg indicator with a
graduated degree scale on left side of machine
also you can tilt motor/grinding
wheel
centerline by adjusting screw and bracket on
top
of carriage to profide a more hollow ground
knife edge
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|