|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 4 matching ads. Now displaying the remaining 4 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10416 | Turning Center 4 - 10 in. chuck |
| 1996 |
Haas |
HL-2 |
Good |
sold |
Photo /
More Info. |
| 10 x 20: 8" chuck: SPECIFICATIONS: std--please verify below
10" X 20" (MAX)
W/PROGRAMMABLE HYDRAULIC TAILSTOCK-verify
15 H.P. MOTOR,
50-3750 R.P.M. SPINDLE, STD. W/HYDRAULIC SYSTEM AND 8" CHUCK.
|
|
| Ad # 10260 | Turning Center 4 - 10 in. chuck |
| 07 |
CQK |
9332B |
Demo Machine |
Sold |
Photo /
More Info. |
| 6" chuck 10x18: Geared lathe
thru hole 2.5"
max workpiece18"
10" over ways
fast feed stepless 3m/m
spindle speed=80-1600 rpm
|
|
| Ad # 10044 | Turning Center 4 - 10 in. chuck |
| 98 |
Haas |
HL-4 |
Very Good |
sold |
Photo /
More Info. |
| 24" swing x 31-40 centers"-- 10"chuck: 36" travel
2-1/2" spindle bore-thru hole
chip conveyor
parts catcher
tool eye
10" chuck
635 CUTTING HOUR ONLY
Std> specs below please verify actual machine...
Capacities:
Swing Over Bed: 24"
Swing Over Cross Slide: 9.5"
Maximum Cutting Diameter: 14.5"
Maximum Cutting Length: 34"
Distance Between Centers: 39"
Travels:
X-Axis: 11.3"
Z-Axis: 34"
Spindle:
10" 3 Jaw HydraulicPower Chuck
Spindle Nose: A2-6
Spindle Bore: 2.5"
Maximum Spindle Speeds: 3,400 rpm
Spindle Drive Motor (continuous / 30 minimum): 20 / 30 Horsepower
Feedrates:
X-Axis Rapid Traverse: 710 ipm
Z-Axis Rapid Traverse: 710 ipm
Tailstock:
Taper: #4 Morse Taper
Travel: 33.5"
Tool Setter
Turret: 12 STATION
Coolant tank and pump
Chip conveyor
General:
Electrical: 208 / 230 Volt, Three Phase, 50 / 60 Hz
Overall Dimensions: 135" x 68" x 76" tall
|
|
| Ad # 10043 | Turning Center 4 - 10 in. chuck |
| 99 |
Haas |
SL30-T |
Very Good |
sold |
Photo /
More Info. |
| 10" chuck---14.5 swing x 39" centers: 30 hp
ridgid tapping
programable tailstock
parts catcher
holds 12 tools
chip auger
floppy drivee
2-1/2 thru hole
Standard specs below-please verify
Swing over front apron: 30" & MANUALS
Swing over cross slide: 14.5"
Bar Capacity: 2.5"
Between Centers: 39"
Maximum Cutting Dia.: 14.5"
Maximum Cutting Length: 34"
Spindle Nose: A2-6
Spindle Top Speed: 3,400 R.P.M.
Spindle Motor: 30H.P. (Vector Drive)
Travels: X-axis 11.30, Z-axis 34"
Turret, Number of Tools: 12
Tail Stock: (MT4): Programmable Hydraulic
On Time: 1210 Hrs. Cutting Time: 387 Hrs.
Options:
Programmable Hyd. Tail Stock -
3.5 Floppy Disk Drive
RS 232 port
1 MB Expanded Memory
Chip Conveyor
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10730 | General Purpose Lathe 15in. to 23in. swing |
| — |
Leblond/ |
Regal |
Good |
SOLD |
Photo /
More Info. |
| 19" swing x72" centers: 19" swing ways, 12" over cross x 72" centers
inch threads
38-1500 rpm
2" spindle bore
taper attach.
3 jaw chuck
19" over ways
12" over cross slide
wired 580/3 |
|
| Ad # 8799 | General Purpose Lathe 15in. to 23in. swing |
| 1943 |
Warner Swaysey |
#4 |
Very Good |
sold |
Photo /
More Info. |
| 16" swing over cross slide: 14" swing over ways
16" swing over cross slide
center distance 20"
12" 4 jaw chuck
10" 3 jaw chuck
7 1/2 hp
rpm 30-1532
|
|
| Ad # 9593 | Tool Room Lathe 8in. to 14in. swing |
| 1953 |
leblond |
regal |
Good |
sold |
Photo /
More Info. |
| 17 swing x 30centers: 4 chucks 6 to 14" 3 and 4 jaw with backplates
steady rest
does threads
no gap
variable speed retrofited
rocher type toolpost
|
|
| Ad # 8635 | Tool Room Lathe 8in. to 14in. swing |
| — |
leblond |
21 x 80 |
Good |
sold |
Photo /
More Info. |
| 21 x 80: 8" 3jaw chuck
10' aol
lenght work area 7ft.
spindle bore 1.5 inches..
swing over ways ??"...
swing over cross slide 13"
|
|
| Ad # 10090 | Tool Room Lathe 8in. to 14in. swing |
| — |
H.Ernault-Somua |
type 230 |
Excellent |
sold |
Photo /
More Info. |
| —: 50-2500 rpm
6"swing over cross
10"overr ways
spindle bore 1-1/4"
taper attach.
tool post
3 jaw 5" chuck
coolant
inch metric thrds
foot brake
|
|
We found 8 matching ads. Now displaying the remaining 8 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10759 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| mid 80,s |
bridgeport |
series 1 cnc |
Very Good |
SOLD |
Photo /
More Info. |
| 9x48 2 axis: 60-4200 rpm
2hp motor
light
9x48 table
long. table travel 24"
cross table track 12"
knee travel 16"
bridgeport control |
|
| Ad # 8727 | Vertical Machining Centers (VMC) |
| 1975 |
mori seiki |
mv-65/50 |
Very Good |
sold |
Photo /
More Info. |
| VMC holds 4,400# part/50x25.5x25.5: travex50,y25.5,z25.5 fanuc ac-20m..30 tool
changer complete with lube pumps table to spindel
32".. has 10,000.00dls worth of tooling still in box..
this table will hold a 4,400 part
|
|
| Ad # 9644 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 1997 |
Sharp |
LMV |
Excellent |
sold |
Photo /
More Info. |
| 9 x 42" : 2 axis cnc knee mill w/ 3 axis readout: 2 axis cnc with manual hand wheels
3 axis readout display
3 HP
Kurt air power draw bar
variable speed type head-manual control.
9x 42 working surface
Travels:x=25,y=18,knee travel-16"
R-8 collets shown not included
vise incl.,but no collets
Auto Lube system..
spindle to column 6-3/4 to 18-1/2
Control:Anilem 3200mk -2 axis w/floppy & RS-232 PORT P/N # A7320002 S/N # 9020417018
all books with machine
machine has approx 500 hrs on it very light work..
|
|
| Ad # 9595 | CNC Vertical Milling Machines w\o ATC |
| 92 |
hurco |
mhp-3k |
Very Good |
Sold |
Photo /
More Info. |
| 11x 49 table-3 axis: 11 x 49 table
electonic hand wheel
Dynopath 20M control
3 HP motor
calculate asst.
rapid traverse-250
500-4500 spindle variable speed
coolant
full range of collets and holders inc r-8 spindle |
|
| Ad # 10259 | CNC Horizontal Milling Machines w\o ATC |
| 1986 |
Maho |
700 mhc |
Good |
sold |
Photo /
More Info. |
| —: cat 40 tooling
coolant
rotary table 24"
4th axis capable
new control
x=700mm y=450mm z=500mm
400x800 mm piece weight
spindle 20-3150 rpm |
|
| Ad # 10045 | Vertical Machining Centers (VMC) |
| 86 |
Bridgeport |
VMC-3016 |
Good |
Sold |
Photo /
More Info. |
| 16x36 w/ 24 tools: coolant
light
24 tools
Ge Fanuc control series-21-I-M control
3 machines available
Std. Specs below, please verify actual machine
BRIDGEPORT VMC-3016 VERTICAL MACHINING CENTER
Std.SPECIFICATIONS:
TABLE TRAVEL (X-AXIS): 30""
SADDLE TRAVEL (Y-AXIS): 16""
SPINDLE TRAVEL (Z-AXIS): 20""
TRAVERSE
X & Y: 826 IN/MIN
Z: 710 IN/MIN
SPINDLE
HORSEPOWER (PEAK): 12
SPINDLE SPEED: 8000 RPM (DIRECT DRIVE)
TORQUE: 140 FT LBS (190 nm) @ 375 RPM
DIAMETER: 2.56""
SPAN OF SPINDLE BEARING: 8.7""
SPINDLE TOOL TAPER: ISO 40
AXIS
DRIVE: AC SERVO
X & Y PEAK THRUST: 3,450 LBS
Z PEAK THRUST: 5,100 LBS
BALLSCREW DIAMETER X & Y: 1.57""
BALLSCREW DIAMETER Z: 1.26""
GUIDEWAYS: LINEAR
AUTOMATIC TOOL CHANGER
TOOL TAPER: BT-40
MAGAZINE CAPACITY: 22
MAX. WEIGHT TOOL HOLDER: 13 LBS
MAX. TOOL LENGTH: 10""
TOOL CHANGE TIME: 4.8 SEC
TABLE
WORKING SURFACE: 36"" X 14""
HEIGHT ABOVE FLOOR: 34""
TABLE LOAD: 2,000 LBS
TABLE T-SLOTS: 3
CENTERS: 4.4""
T-SLOT SIZE: .63""
SPACE & WEIGHT
MACHINE HEIGHT: 100""
MACHINE WIDTH: 98""
MACHINE DEPTH: 110""
MACHINE WEIGHT: 7,200 LBS
ELECTRICS: 230 VOLTS, 3 PH, 60 CYC
EQUIPPED WITH:
GE FANUC 21iM Control
Rigid Tapping
High Speed Machining
Tooling Package
All Available Manuals
|
|
| Ad # 11014 | Vertical Machining Centers (VMC) |
| 1994 |
Fadal |
906-1 |
Very Good |
Sold |
Photo /
More Info. |
| 40x20x26: Fanuc control-88 HS
4th axis ready
ridgid tap
21 tool carousel
cat 40 tools
10,000 rpm spindle speed
extended Z axis to 4" extra |
|
| Ad # 11015 | Vertical Machining Centers (VMC) |
| 1991 |
Fadal vmc-40 |
904-1 |
Good |
sold |
Photo /
More Info. |
| 22x16x16: 10,000 rpm spindle speed
21 tool carousel
travel 22x16x16
cat 40 tools |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8633 | Universal Mills (Horizontal / Vertical) |
| 52?? |
milwakee/ K & T |
2H -Plain |
Fair |
Sold |
Photo /
More Info. |
| —: 2-H
2H vertical.. made buy kerney and treker
auto feed
10 x 50 table ??
Milwaukee horizontal/vertical milling machine,
mod 2H
10” x 50”
35-1400 rpm on spindle,
40 or 50? taper,
vertical head,
manual draw bar
some tooling
|
|
| Ad # 9217 | Horizontal Mills |
| — |
Kerney & Trecker |
# K-2 plain h |
Good |
sold |
Photo /
More Info. |
| —: 20-800rpm
11.5" table
40 taper horiz.spindle
with vertical head
Model K
# 2 Plain Style
7.5 hp
S/N 29-4228
With standard directional table control
Height: 5'4"
width: 6'x6'
Footprint: 50"x 29"
Weight: 6,600 lbs
Specifications
Table Size 12"x 56"
X Axis Travel 27"
Knee Travel 10"
Spindle RPM 15-1500 RPM
Spindle Taper ISO 50
Rapid Travers
|
|
| Ad # 9217 | Horizontal Mills |
| — |
Kerney & Trecker |
# K-2 plain h |
Good |
sold |
Photo /
More Info. |
| —: 20-800rpm
11.5" table
40 taper horiz.spindle
with vertical head
Model K
# 2 Plain Style
7.5 hp
S/N 29-4228
With standard directional table control
Height: 5'4"
width: 6'x6'
Footprint: 50"x 29"
Weight: 6,600 lbs
Specifications
Table Size 12"x 56"
X Axis Travel 27"
Knee Travel 10"
Spindle RPM 15-1500 RPM
Spindle Taper ISO 50
Rapid Travers
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10928 | Automatic Bar Machines |
| 1982 |
mitsubishi/ acme gridley |
66-mrb-88 |
Good |
sold |
Photo /
More Info. |
| 2-1/16th: 8 spindle
new belts
conveyor
new saftey clutch
new roll clutch
slides scraped
new heavy duty stock tube
new pusher pads
new chuck and shoes
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9689 | Tapping / Threading Equip. |
| — |
— |
— |
Fair |
sold |
Photo /
More Info. |
| 2-1/4" double headed: — |
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9705 | Vertical Band Saws |
| 2000? |
Do-All |
2013-V |
Very Good |
sold |
Photo /
More Info. |
| 20" throat: 20" throat
13" work height
26x26 adjusting and tilting table
light
154" blade
GENERAL SPECIFICATIONS: mfg Std. specs below -please verify
Throat: 20"
Maximum Work Height: 13"
Band Width: 1/16" to 1"
Band Length: 154"
Table Size: 26" x 26"
Table Capacity: 500 Lbs.
Speeds: 55-300 FPM, 950-5200 FPM
Table Tilts: 45 Degrees Right, 10 Degrees Left
EQUIPPED WITH
2 HP Drive Motor
Dual Range Transmission
Work Light
Voltage - 230
Phase - 3
Cycle - 60
Approximate Weight: 1250 Lbs.
|
|
| Ad # 8800 | Horizontal Band Saws |
| 2004 |
RF |
RF MBS 71200 M |
Good |
sold |
Photo /
More Info. |
| 7 inch: 7" band saw
1" blade
coolant pump does not work
would make good home shop machine
|
|
| Ad # 9688 | Horizontal Band Saws |
| — |
Dake |
J |
Fair |
sold |
Photo /
More Info. |
| 12" rounds/16" flats: Kysor Johnson Model J Horizontal Manual Bandsaw Cutting capacities to 12" ... |
|
| Ad # 8636 | Vertical Band Saws |
| — |
doall |
2013-10 |
Very Good |
sold |
Photo /
More Info. |
| —: w/ welder154" band length..file band 153" up to
1" blade..30" table |
|
| Ad # 10442 | Fully Automatic Horizontal Band Saw |
| 87 ?? |
DoAll |
C260A |
Very Good |
sold |
Photo /
More Info. |
| 10" round capacity-w/ shuttle: fully automatic w/ shuttle feed
miters
10" round
10x12 rec part
chip auger built in
with extra transformer incl.
all power
coolant
138" blade |
|
We found 6 matching ads. Now displaying the remaining 6 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10929 | Tool & Cutter Grinders |
| 2000 |
Walter |
HMC-500 |
Very Good |
Sold |
Photo /
More Info. |
| 5 AXIS tool and cutter grinder: 2000 Walter HMC-500 Helitronic Power 5 axis grinder
Std. specs below-please verify
Travels: 18.5" x 12.5" x 26" ,
24HP main motor
walter HMC-500 cnc control
software pkg 1,2,3,4 16,25
#1-basic end mill pkg
# 2-taper end mill pkg
# 3-drill & step drill pkg
# 4-counter bore step tool pkg
# 16-warm up pkg
# 25-compression routers pkg.
cyber grinding for off-line programming
Xpert mode programming
glass scales
Spindle speed 8500 rpm
Max tool length-12.6"
Max tool gring Length-14.6" OD
max workpiece weight-110.25 lbs
gring wheel dia-7.88"
includes mist system
co2 fire suppression
Machine weight:10,200lbs
t-slots on c axis
high presure coolant
coolant filter system
approx. 31,000 hrs as of 2/1/11 |
|
| Ad # 9706 | Pedestal & Bench Grinders |
| 60 s |
hiss/wolf |
239964 |
Fair |
sold |
No Photo /
More Info. |
| double wheel 12x1 wheels wet/dry: heavy duty machine |
|
| Ad # 8728 | Vertical Spindle - Blanchard Type |
| 1975? |
gardner |
36" |
Good |
sold |
Photo /
More Info. |
| 36" Gardner dial dia. 78" and 96" table: 43hp
96"table
ideal dia.78"
work swing on size 10"
height under wheel 8.5"
table has new frequency drive control, total 5
motors ..2-20hp,main...no maint. issues runs well |
|
| Ad # 9502 | Surface Grinders |
| — |
harig |
super 612 |
Very Good |
sold |
Photo /
More Info. |
| harig super 612: manual surface grinder 6 x 18
6" wheel
fine pole perm mag chuck
light |
|
| Ad # 10386 | Cylindrical Grinders (O.D. & I.D.) |
| 1983 |
Schumag |
NS-11 |
Very Good |
Sold |
Photo /
More Info. |
| Automatic Point/Needle-wire grinder:0.0285-0.1433in: Operating range below
shaft dia,approx.0.0285-0.1433in-- 0.7mm to 3.6mm
shaft length w/out needed point 50 mm-150 mm; 1.969in to 5.906"
performance with transport wheel 7400-37100 pieces/hr
transport wheel dia. 11.3386"x 1.7716"
4HP
2880 RPM
grinding wheel : 7" wide x 17" dia max
10 extra rubber wheels included
auto pallet loader
manuals
|
|
| Ad # 10165 | Cylindrical Grinders (O.D. & I.D.) |
| — |
Landis |
14x36 |
Good |
Sold |
Photo /
More Info. |
| 14x36 OD grinder: 14swing x 36centers
1-1/2x14 wheels
3 new wheels with machine
7.5hp spindle
power feed all axis |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9682 | Broaching Machines, Vertical & Horizontal |
| — |
davis |
#4 |
Good |
sold |
Photo /
More Info. |
| 1/16 to 3/4: 1-16 to 3/4 " capacity
length of cut 4" or 8"
straight ot tapered keyways
lot of broaches with machine
Keyways 1/16" to 3/4", Max Height 8", Length of Cut 4" or 8", Face of Cutter to Resistance Arm Post 14-1/4", Table 24-1/4" x 26-1/2", Drive Motor 2 HP |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10261 | RAM / Conventional EDM Machines |
| 84 |
Sodick/Inova |
22-nc |
Good |
sold |
Photo /
More Info. |
| 40 amp 300v 6x12 chuck : 24x14x18 tank
sodick 8100 control |
|
We found 6 matching ads. Now displaying the remaining 6 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10847 | Power Squaring Shear (Mechanical) |
| — |
cincinnati-16 |
18-12 |
Very Good |
sold |
Photo /
More Info. |
| 12ft x 1/4" mechanical: 12ft x 1/4" mechanical shear
power back gage
10ft. squaring arm
2 sets of blades---1 set brand new
|
|
| Ad # 8578 | Foot Stomp & Air Operated Shear |
| 84 |
WYSONG |
A120 |
Very Good |
sold |
Photo /
More Info. |
| 10 FT. Length x 18 GAGE: 4 CUTTING EDGES NOT MOVED OFF OF 1ST side
10 FT. CUTS 18 GAGE
BACK gage 28 IN .
MANUAL SUPPORT
air powered |
|
| Ad # 10167 | Power Squaring Shear (Mechanical) |
| — |
Niagra |
HL-10 |
Fair |
Sold |
Photo /
More Info. |
| 10ft.x10 gage: table-18" front to back
19" throat
air clutch
11 hold downs
foot switch
7 dovetail slots |
|
| Ad # 10166 | Power Squaring Shear (Hydraulic) |
| — |
Trufab |
S-1225 |
Very Good |
sold |
Photo /
More Info. |
| 12ft.x 1/4: 12ft x 1/4" hyd shear
power back gage
front squareing arm
cut to front edge 25"
foot pedal |
|
| Ad # 11077 | Power Squaring Shear (Hydraulic) |
| — |
Cincinnati |
4H10 |
Very Good |
sold |
Photo /
More Info. |
| 10 ft x 1/2": SERIAL ............................. 3C105
MODEL .............................. CENTURY 4H10
YEAR NEW ........................... 1980
CAPACITY ........................... 1/2" MILD STEEL
LENGTH OF BLADES ................... 124"
HYDRAULIC HOLD DOWNS ............... 11
SQUARING ARM ....................... 125"
FRONT ARM SUPPORTS ................. 2
FRONT OPERATED POWER BACK GAUGE .... 36"
ELECTRIC FOOT PEDAL ................ YES
FLOOR STANDING NO PIT REQUIRED ..... YES
MOTOR .............................. 20 HORSEPOWER
|
|
| Ad # 10092 | Foot Stomp & Air Operated Shear |
| 70,s? |
Famco |
652 |
Good |
sold |
Photo /
More Info. |
| 52"x16 ga.-air operated: 52" cut length x 16Ga capacity mild syeel
12" wide table
air operated
no back gage,no front support arms
12 " squaring arm built into the table edges w/ ruler
cuts good |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8582 | Press Brakes (Mechanical) |
| 02 |
TENNSMITH |
HB97 |
Very Good |
sold |
Photo /
More Info. |
| 18 GAGE 8FT.: COMPLETE WITH ANGLE BAR
18Ga capacity-mild steel
97" bend length
1/2" rear beam adj.
1/4" reverse bend
1" min flange capacity |
|
| Ad # 11101 | Press Brakes (Mechanical) |
| 60,s |
cincinnatti |
series 9 x 225 ton |
Good |
sold |
Photo /
More Info. |
| 12 foot x 225 ton: 12 foot x 225 ton
Autobend iv control back gage
light curtains
3" stroke
misc. tooling incl. |
|
| Ad # 11076 | Press Brakes (Hydraulic) |
| — |
Cincinnati |
2 - 30 |
Very Good |
sold |
Photo /
More Info. |
| 6 ft -- 30 TON : SERIAL ............................ 28621
MODEL ............................. 2-30
CAPACITY .......................... 30 TON
OVERALL LENGTH OF BED AND RAM ..... 72"
DISTANCE BETWEEN HOUSINGS ......... 62"
STROKE OF RAM ..................... 2-1/2"
POWER RAM ADJUSTMENT .............. 4"
DIE SPACE, SDAU ................... 12"
DEPTH OF THROAT ................... 9"
POWER RAM ADJUSTMENT .............. YES
ELECTRIC FOOT PEDAL ............... YES
BACK GAUGE ........................ 24" MANUAL
DRIVE MOTOR, HORSEPOWER ........... 3
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9212 | Misc. Sheetmetal Equip. |
| — |
Pullmax |
X-91 |
Good |
Sold |
Photo /
More Info. |
| 1" width x 2.5 thick -beveler: capacity 1" mild steel
6 hp motor
some tooling extra cutters:
(2) 90-05:2710:16150385-28
made in sweden
PULLMAX #X91 HEAVY DUTY BEVELER, MAX CAP. 1" W x 2-1/2" THICK
SPECIFICATIONS: factory specs-please verify unit
BEVELER ANGLES: 25 - 55 DEG
MAXIMUM CAPACITY (WIDTH x THICKNESS): 1" x 2-1/2"
MAXIMUM DEPTH OF BEVEL (1" WIDE BEVEL): 7/8" @ 30 DEG.
25/32" @ 37-1/2" DEG
MAXIMUM LAND (UNBEVELED EDGE): 1/8" @ 25-45 DEG
MAXIMUM THICKNESS THAT CAN BEVELED: 2-1/2" @ 25 DEG
2-1/4" @ 55 DEG
BEVELING SPEEDS (MILD STEEL): 12 FPM
CUTTING WHEEL DIAMETER: 7-7/8"
EQUIPPED WITH:
- MANUAL ADJUSTMENT
- BEVELS STRAIGHT OR CURVED EDGES
- CAN BE USED UPRIGHT, UPSIDE DOWN, OR ON ITS BACK
- AC MAIN DRIVE MOTOR
- ELECTRICAL CONTROLS
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9213 | Ironworkers |
| — |
custom |
30 ton ?? |
Good |
Sold |
Photo /
More Info. |
| 10-25 tons capacity-?: machine that will cut
4.5" flat bar shear
10-25 tons ??
3 x 3 angle iron shear
rod shear 1.5,1",3/4",1/2",3/8",1/4" Dia.
hole punch- approx 1" ??
40 ton 5" dia. cylinder
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9681 | Hydraulic 4 Post Press |
| — |
beckwood |
801438 |
Good |
Sold |
Photo /
More Info. |
| 60 ton: 60 ton
20x30x20shut height
|
|
| Ad # 10524 | OBI Presses |
| — |
Alva Fallen |
BT-5-101 |
Good |
Sold |
Photo /
More Info. |
| 5 ton punch press: 5 ton capacity
6" x 12" base table |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9214 | Flame |
| 1984 ? |
CSX-64 |
ESAB |
Good |
SOLD |
Photo /
More Info. |
| 5ft.x 16ft - 4 head OXY Acetaline: 4 torch heads
cnc controlled-Burny-3 cnc control
oxy-accetaline fuel
Esab-HEATH tracing eye or retrofitted to cnc control not using tracing eye now..
includes table, pan, rails, control unit
machine worked when pulled out of service |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10262 | Air Compressors, Rotary Screw Type |
| 1998 |
Kaeser |
BS61 |
Good |
sold |
Photo /
More Info. |
| 50 HP: 50 hp-100amp
240CFM
includes air dryer-AD-250
S/N # 9810-T130287P-T-250cfm
uses R-22 refrigerant-moist seperator
51,981 hrs
no tank
very nice unit
one left ! |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8801 | Hardness Testers |
| — |
Rockwell/Wilson |
— |
Excellent |
Sold |
Photo /
More Info. |
| —: Rockwell hardness tester with stand
lots of test blocks
complete set-up |
|
| Ad # 9522 | Coordinate Measuring Machine, (CMM) |
| 1995 |
DEA |
SWIFT AO1001 |
Good |
sold |
Photo /
More Info. |
| 20x16x13: computer is Compac 4/331
The DEA Swift A001 has Accuracy Performance:
20 x 16 x 13 table
Linear
X .0050
Y .0040
Z .0035
Repeatability
X .0060
Y .0060
Z .0060
Volumetric *
.0112
* Volumetric Accuracy using a 300mm Ball Bar
The DEA Gamma 1103 Specifications:
X Axis travel
695mm
Y Axis travel
495mm
Z Axis travel
315mm
Weight
1900 lbs.
Overall Dims (LxWxH):
5’ x 3.5’ x 7’
The DEA Gamma 1103 coordinate measuring machine has an DEA Tutor P controller, please verify
The Tutor P electronic control, the computer system and Renishaw probing.
Includes printer
complete probe set
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9490 | Miscellaneous Plastic Accessories & Equipment |
| — |
— |
— |
Good |
sold |
Photo /
More Info. |
| 250 gal. cyclone material bagger: cyclone bagging unit-250 gal
bags bulk material |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9215 | Box Type Furnaces |
| — |
Despatch |
PS-11.33 x 6.83 x 7.5C |
Good |
sold |
Photo /
More Info. |
| 11 x 6 x 7 max temp 500 deg: gas fired
500 degrees max op. temp
for curing adhesive on alum. panels
2 available-one has gas controls other does not... |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10164 | Forklifts / Lift Trucks (All Types) |
| 1974 |
grove crane |
— |
Very Good |
sold |
Photo /
More Info. |
| 12-1/2 ton 60ft. boom truck: 300hp cummins
big cam
9 speed trans.
60 ft. boomsingle engine 20 ft. jib
dot approved |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
