User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Mills & Machining Centers
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 7926 | CNC Parts and Accessories |
90'S |
TSUDAKOMA |
RNCV301R |
Excellent |
sold |
No Photo /
More Info. |
Rotary table-true 4th axis : Used rotary table 4th axis-true fully
programmable
was wired into a Matsuura
Turntable Diam. 320mm=12.5"
center height in vert. position 210mm,
table height in horiz. position 220mm,
overall
height in vert. position 380mm, diameter of
Spindle hole 42mm, Indexing accuracy 20 sec.
Mounting plate and lifting hook are included.
Is
in excellent condition, was mainly used in a
training environment.
Don't miss this one. Call us if any question
or
additional specs. |
|
Ad # 8238 | Vertical Machining Centers (VMC) |
1998 |
Yang |
MV5A |
Excellent |
Sold |
Photo /
More Info. |
71" x 32" Table Vertical Machining Center: CAT 50, 3500RPM Spindle
1800 x 820 Table
1300 x 750 x 750 Travels
Fanuc O-M Control
4th Axis Ready W/ Drives Rotary Not Included
30 Tool Arm-Type ATC
Full Enclosure
Coolant Thru Spindle PKG
Chip Conveyor & Bucket
Machine Can Be Demoed
Sold new for Approx $125,000 |
|
Ad # 8087 | Vertical Machining Centers (VMC) |
1991 |
Fadal |
VMC-40 / 904-1 |
Good |
Sold |
Photo /
More Info. |
table size : 39" x 16" ; 15HP;10,000 RPM: Table size : 29in x 16in
Travels: 22" x 16" x 20"
Control: CNC-88
full enclosure
coolant tank & pump
Work Light
ATC toolchanger-21 stations
HP: 15
Manuals included
Cat 40 taper
10,000 RPM spindle speed max.
Machine has a 10K RPM Spindle & chiller system, Full 4th Axis w/ model PH165 4th Axis Table, Autolube, Spindle Lube w/ Spindle Chiller, Way Flush, Coolant System w/ Skimmer. (does not have Rigid Tapping). |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8123 | Automatic Bar Machines |
|
Brown & Sharpe |
00G |
Very Good |
Sold |
Photo /
More Info. |
1/2" Capacity: Brown & sharp #OOG: 7- Machines Available
Can be sold as a package or Individually
Tooling & Accesories May Vary on each Machine
|
|
Ad # 8122 | Automatic Bar Machines |
|
Brown & Sharpe |
00 Auto |
Very Good |
Sold |
Photo /
More Info. |
1/2" Capacity- brown & sharp #OO: 7- Machines Available
Most in Very Good Condition
Could Sell as a Package or Individually
|
|
Ad # 8124 | Automatic Bar Machines |
|
Brown & Sharpe |
2G32 |
Excellent |
Sold |
Photo /
More Info. |
1/2" Capacity: Brown & sharp # 2G32: 2-Machines Available
Both Machines Recently Refurbished
Can Sell as a package or Individually
Tooling & Accesories may vary per Machine
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8121 | Belt & Disc Grinders |
90's |
Wilton |
|
Very Good |
sold |
Photo /
More Info. |
: 6" belt
10" Disc
Tilt Table
Cabinet
Lots of extra Belts
|
|
Ad # 8090 | Surface Grinders |
1960's |
Reid |
618P |
Good |
Sold |
Photo /
More Info. |
2- axis hydraulic/manual 6 x 18" : 6"x18" Perm. Mag. Chuck,
Hyd. X & Y,
Recent New Spindle Installed.
|
|
Ad # 8088 | Surface Grinders |
2000 |
Harig/Bridgeport |
EZsurf 1 |
Excellent |
Sold |
Photo /
More Info. |
Full 3 axis cnc / manual grinder :6" x 18": Full 3 axis CNC grinder With X & Y hand wheel
PC based control
control , Z(head) uses push button on console
6 x 18 perm mag chuck fine pole
travel 20" long , 6.75 cross, 11.75 height
1.5HP
Very high accuracy grinder
8" x 1-1/4" Wheel size
Work Light,
Coolant
Control:EZ Program CNC-BPCG/ Manual (teach mode), Full Enclosure, all Manuals
EZ-Surf Surface Grinder combines Newall Microsyn digital linear encoders with software specifically designed to interface with scales. It permits machinist to operate in manual, semi-automatic or fully automatic modes. EZ-Surf comes with 7 in. wheel with 8 in. wheel capacity, integral 2-diamond wheel dress, 3 in. diameter spindle, and 1.5 HP continuous-duty spindle motor. It provides 100 ipm rapid transverse for vertical y-axis and cross feed z-axis.
The EZ-Surf permits the machinist to operate in the manual, semi-automatic of fully automatic modes. This flexible and now very high precision machine is built to the rugged standards incorporated into all Bridgeport machines. This includes a cast iron base with three point leveling. An automatic continuously circulating lubrication system, hand scraped ways and ground internal parts add to the precision operation and long life. The two-axis PC control is at eye level for increased operator accessibility.
The EZ Surf comes with a 7" wheel with an 8" wheel capacity and integral, 2-diamond wheel dress with wheel dress compensation. There's 100 ipm rapid transverse for the vertical y-axis and cross feed z-axis. The hydraulic, longitudinal table feed with on/off control, soft hydraulic regulating valve is ideally suited for speeds from 3 fpm to 70 fpm standard. The operator has the choice of standard or slow (.250 ipm to 30 fpm) longitudinal feed. The 3" diameter spindle with class 7 pre-loaded ball bearings and 1.5 HP continuous duty spindle motor make the EZ-Surf a reliable machine for long life.
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8116 | Chip Wringers / Centrifuges |
|
TOLHURST |
32" |
Fair |
sold |
Photo /
More Info. |
150 lb/cu Ft: : chip wringer-centrafuge: Vertical Bottomless Centrifuge (Chip Wringer)
500 / 1000 RPM Basket
32" Diameter
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8117 | Vibratory Equipment |
|
Kramer Industries |
Econo 300 / B30N2 |
Good |
sold |
No Photo /
More Info. |
25" x 12" x 12" Tube Finishers: Kramer Industries-Econo 300 / B30N2
Tub size 25" x 12" x 12"
Tub is full of polishing media
|
|
Ad # 8119 | Vibratory Equipment |
1972 |
GhiiLong |
GB300 |
Good |
sold |
Photo /
More Info. |
48" Dia. vibratory bowl: 48" Diam. x 12" Wide x 20" Deep
Heavy Duty Vibratory
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|