User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9805 | General Purpose Lathe 15in. to 23in. swing |
2001 ? |
ACER |
1740G |
Very Good |
Sold |
Photo /
More Info. |
ACER DYNAMIC 1740G Engine Lathe: 17" swing
40" centers
center height 8 1/2"
swing over bed 17"
swing over cross slide 9 5/8"
spindle bore diameter 2 1/4"
distance between centers 40"
3-jaw chuck
14" face plate
Steady rest (.6" - 7")
4-way tool post
Coolant system
Full length splash guard
Chuck guard with emergency stop
Halogen work light
Sony 2 axis DRO
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9806 | Knee Mills (Bridgeport Type) |
|
Lagun |
FTV-2 |
Very Good |
Sold! |
Photo /
More Info. |
Lagun FTV-2: 2 Machines available
50" X 10" TABLE
3 HP SPINDLE MOTOR
R-8 TAPER IN SPINDLE
55-4250 RPM VARIABLE SPINDLE SPEEDS
COOLANT
WEIGHT 2850 LBS.
Includes: 2 Axis Digital Readout
Longitudinal Table Power Feed, Hardened & Ground Ways, 6" Swivel Vise, Right Angle Head Attachment, 3 HP Spindle Motor.
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9707 | Single Spindle Drill Press |
Antique |
Champion |
2X442 / RS-2 |
Needs Work |
Sold |
Photo /
More Info. |
Champion Drill Press: 16" round table
10 1/2" throat
2 HP motor |
|
Ad # 9656 | Drill / Thread Parts & Accessories |
|
DAREX |
|
Very Good |
Sold |
Photo /
More Info. |
Drill Bit Sharpener on Pedastal Grinder: on floor standing pedestal
worklight
1/3 hp motor
3450 rpm
115 volt
4.2 amps
60 HZ |
|
Ad # 9575 | Single Spindle Drill Press |
|
Central Machine |
1058C |
Good |
SOLD |
Photo /
More Info. |
Floor Standing Drill Press: 1 HP Motor
16 speed HD
1/2" chuck
work light
8" throat
13" Round work table |
|
Ad # 9289 | Single Spindle Drill Press |
|
Delta |
|
Good |
Sold |
Photo /
More Info. |
Drill Press: 1 hp , 1/2", 10" throat, belt drive drill press
with adjustable table. |
|
We found 4 matching ads. Now displaying the remaining 4 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9708 | Vertical Band Saws |
|
Rockwell / Delta |
|
New |
Sold |
Photo /
More Info. |
Rockwell / Delta Band Saw: 142" blade
20" throat
welder
24" x 24" tilt table
50 - 4200 fpm |
|
Ad # 9654 | Vertical Band Saws |
1986 |
Wholesale Tool Co. |
LCM-450 |
Good |
Sold |
Photo /
More Info. |
Power Band Saw: 20" x 24" worktable
1/4" - 3/4" blade
worklight
1 hp motor
20" throat |
|
Ad # 9657 | Horizontal Band Saws |
|
JOHNSON |
Mod "J" |
Good |
Sold |
Photo /
More Info. |
10in Horizontal Electric Band Saw: 10 1/2" round
10 1/2" x 18" rectangular
manuel 23" material stop
Step pulley ratio
w/ blade coolant
10' of "in feed" conveyer |
|
Ad # 9573 | Cold Saws & Power Hack Saws |
1990 |
SCOTCHMAN |
CPO 315HT-PK |
Good |
SOLD |
No Photo /
More Info. |
Ferrous Cutting COLD SAW: 12" Ferrous Cutting Blade
power air clamp vise
10' In-Feed Conveyer Rollers
6' Out-Feed Conveyer Rollers
Single Speed
87" material stop scale mounted to out-feed conveyer |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9709 | Pedestal & Bench Grinders |
|
Craftsman |
CR16E |
Good |
SOLD |
Photo /
More Info. |
Floor Pedestal Grinder: On pedestal
1/3 HP ball bearing motor |
|
Ad # 9577 | Belt & Disc Grinders |
|
JET |
JSG-6 |
Good |
Sold |
Photo /
More Info. |
BELT / DISC SANDER: mounted on floor stand
1-1/2 HP motor
adjustable table on belt
6" x 48" belt
12" disc |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10238 | Horizontal and Vertical Hones |
2007 |
SUNNEN |
LBB-1660 |
Excellent |
Sold |
Photo /
More Info. |
SUNNEN HONING MACHINE: DIAMETER RANGE (ID)
manuel stroking: .370 - 4.700 in.
Workpiece Weight: 6 lbs.
Stroke Length Range: Up to 16 in.
Spindle Speeds: 200 to 640 rpm.
Spindle Motor: 1/2 hp
Coolant Pump: Centrifugal pump driven off spindle motor.
Coolant Capacity: 16 gallons
Coolant Requirements: Sunnen Industrial Honing Fluids
Floor Space: 60" D x 32" W x 63" H
Floor Weight: 630 lbs
Floor Load: 151 lbs/sq ft
Electrical Requirements: 110/230V,60Hz,1Ph
220/380/440V,50Hz,3Ph |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9700 | Foot Stomp & Air Operated Shear |
|
Peck Stow &Wilcox |
02520 |
Fair |
Sold |
No Photo /
More Info. |
48" 16 gauge: Stomp Shear converted to Pneumatic
28" squaring arm w/foot pedal |
|
Ad # 9653 | Hand Operated Shears |
|
Beverly |
B-2 |
Very Good |
SOLD |
Photo /
More Info. |
Beverly Shear: stand included |
|
Ad # 9568 | Power Squaring Shear (Hydraulic) |
1984? |
Chicago |
CPA-630 |
Very Good |
sold |
Photo /
More Info. |
Hydraulic Shear 10' x 1/4": 10ft x 1/4"
open ended...type 16" throat
Square arm-55"
front supports
table height - 32"
auto power back guage 40"
stroke counter
foot pedal |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9603 | Finger Brakes-Box & Pan Brakes |
1982 |
JET |
BP-1648 |
Fair |
Sold |
Photo /
More Info. |
48" x 16GA Finger Brake: 4 ft x 16ga
includes stand
missing 2 fingers |
|
Ad # 9572 | Straight Apron Brakes |
|
CHICAGO |
SO - 816 |
Very Good |
Sold |
Photo /
More Info. |
8' x 16 guage: 8 ft x 16ga
nose bar looks very good
includes angle iron bracket |
|
Ad # 9462 | Finger Brakes-Box & Pan Brakes |
|
Magna Bend |
MBB4181 |
Good |
Sold |
Photo /
More Info. |
Magna Bend 4ft x 18Ga: Will bend 18 ga. x 4' wide max.
Includes 10 Keepers (Clamping Members) Sizes: 51 1/4"(full bar), 12", 6", 4 3/4", 3 3/4"
2 3/4", 1 7/8", 1 3/8", 1", 3/4" |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9655 | Powered: Hole/ Turret Punches |
|
WIEDEMANN |
Type R-2 |
Good |
Sold |
Photo /
More Info. |
PUNCH PRESS 12 Station: 12 station / 1/8" - 1 1/2"
12" throat
includes stand
36 " x 19" worktable
needs few dies reworked |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9583 | Mig & Tig Arc Welders |
|
MILLER |
DIalarc HF |
Good |
SOLD |
Photo /
More Info. |
DIALARC HF Tig Welder: Miller Style JJ-24 w/radiator
mounted on castered cart w/overhead crane / lift |
|
Ad # 9584 | Mig & Tig Arc Welders |
|
MILLER |
CP-200 |
Very Good |
SOLD |
Photo /
More Info. |
Miller "CP-200" arc Welder: Miller "S-22A" wire feeder |
|
Ad # 9574 | Mig & Tig Arc Welders |
|
LINCOLN |
"PRECISION TIG 275" |
Excellent |
SOLD |
Photo /
More Info. |
Tig or Stick Welder w/Micro Start Tech: Micro Start Technology
Under-Cooler Cart Water Cooler
Foot Amptrol
Argon/Helium Flowmeter Regulator w/10'hose
PTW-20 Tig Torch
Zippered Torch cover
15' 2/0 Work Cable and Clamp |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8975 | Air Compressors, Piston Type |
1980 |
CURTIS |
CV-9813 B |
Good |
Sold |
Photo /
More Info. |
CURTIS Air Compressor: Siemens PE21 Plus Premium Effeciency, 286T frame, 30HP, 34.9amp, 1765 rpm c... |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8967 | Coordinate Measuring Machine, (CMM) |
2001 |
FARO |
G08-05 |
Excellent |
Sold |
Photo /
More Info. |
Faro Gold Arm w/ 4' reach: INCLUDES ALL SOFTWARE!!!! INCLUDES CASTERED, MACHINED TOP, WORKSPACE TABLE!... |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|