|
User SearchYour search results (if any) appear below in groups of 75 for each section.
Drilling & Tapping Equipment
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12270 | Single Spindle Drill Press |
| 2001 |
Steel Max |
Magnetic |
Excellent |
sold |
Photo /
More Info. |
| Portable Magnetic Drill Press: Steel Max Magnetic Drill Press
little used |
|
| Ad # 12269 | Single Spindle Drill Press |
| — |
Evolution |
ME3500 |
Excellent |
sold |
Photo /
More Info. |
| Protable Magnetic: Evolution ME3500
Magnetic Drill Press
1" 1/2" Drill chuck max
The amazing ME3500 magnetic drilling system may be small - but it features a powerful 1200-watt motor - 35mm capacity - and high magnetic adhesion - which makes it ideally suited to those lighter duty jobs both on and off site---Compact - lightweight and portable - |
|
| Ad # 12272 | Single Spindle Drill Press |
| — |
Jet |
JPP-17MF |
Good |
sold |
Photo /
More Info. |
| 8" Throat : Jet Drill Press
8" Throat
16-1/2-Inch drill press; 13-3/4-Inch table tilts 45-Degree left and right
16 speeds from 200 to 3,630 rpm; 3/4-horsepower motor
Cast-iron construction with heavy-steel components
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12262 | Horizontal Band Saws |
| 97? |
Wellsaw |
613 |
Good |
sold |
Photo /
More Info. |
| 13" x 6" Round 6" Max: Wellsaw Model 613
13" x 6" Rectangle
6" Round Max
Miter Vise
¡Four speed eV belt drive
¡1 HP motor
¡3/4 blade
|
|
| Ad # 12261 | Cold Saws & Power Hack Saws |
| 95 |
Scotchman |
350 HT |
Good |
sold |
Photo /
More Info. |
| ferrous cutting: Scotchman ferrous cutting cold saw
14" blade
HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material HT (High Turn) 44 rpm / 88 rpm Motor rate: 2.5 hp
TUBING
Round
Square
Rectangle
SOLID
Round
Square 90 Degree
4-1/2"
4-1/4" x 4-1/4"
5-1/2" x 4"
90 Degree
2"
2" x 2"
45 Degree 4"
4" x 4"
4" x 4"
45 Degree 1-3/4"
1-3/4" x 1-3/4"
Maximum Diameter Blade 14" 350 mm
Arbor Bore 1-9/16" 40 mm
Pin Spacing 4/12/64
Width 21-7/8"
Depth 43-1/2"
Height not including handle 56-1/4"
Height from floor to vise 37-7/16"
Shipping Weight 675 lbs.
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12268 | Belt & Disc Grinders |
| — |
Enco |
12 |
Good |
sold |
Photo /
More Info. |
| 12" Disk x 6" x 48" Belt: Enco 12" Disk Sander With 6" x 48" Belt
220 Single Phase |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12263 | Benders-Pipe and Tube |
| 1997 |
Ercolina |
top bender-050 |
Good |
sold |
Photo /
More Info. |
| 2-1/2" OD : Ercolina- top bender-TB 050
software #RC0063B-T
rotary draw style bender
foor pedal operation
Note:Several Pipe dies-tooling included
● Bends material to 2½” OD
● Heavy-duty gear case with maximum 11⅞” CLR
● Patented tooling system achieves CLR two times diameter without mandrel
● Low voltage 24V controls
● Operator friendly control panel memorizes bend angle and springback
● Programmable bend angles 0 to 180°
● Adjustable material springback for bend accuracy
● Single bending speed
● Bends to 90° in five seconds
● Remote foot pedal for hands free operation
● Patented swing away vise system and hex mounted tooling increase productivity
● Overload protection controls
● Standard multiple language capability
● Transportation wheels and lift handle built into base cabinet
● Tool free tooling changes with multiple CLR available for each diameter
● Accepts Ercolina® two axis A40/P positioner table
● Comprehensive (1) one-year warranty
Machine Capacities
Material Maximum Maximum
Diameter Thickness
Pipe 2” ID Schedule 40
Mild steel tube 2½” .125
Soft brass 2½” .140
Stainless steel 2½” .065
Welded furniture tube 2½” .125
ST 35 hydraulic steel 2½” .125
304L hydraulic stainless 2½” .095
Hard copper and aluminum 2½” .187
Round solids 1½” --
Rectangular solids ⅜” x 2 ⅜” --
Rectangular tube 1¼” x 2½” .118
Square tube 2½” x 2½” .083
Square solids 1¼” x 1¼” --
Mild steel T 2½” x 2½” .236
Mild steel C channel 2” x 1” .200
All capacities based on mild grade material using machine at low bending speed;
Dimensions and Specifications
Height x Length x Width 30” x 20” x 40”
Bending speed 1.7
Motor 220 volt
Minimum and Maximum CLR ⅜”-15”
Bending angle range 0 to 180◦
Weight 374
Also have manual in digital form-PDF
|
|
| Ad # 12250 | Tube & Pipe Notchers |
| — |
Almi |
MTYAL12U |
Good |
sold |
Photo /
More Info. |
| 2" 1/2 max: Almi Electric Tubing/Pipe notcher
Capacity 2" 1/2 (2") 1" 1/2 (1" 1/4) 1" |
|
| Ad # 12249 | Tube & Pipe Notchers |
| — |
Mittler Brothers |
400-S |
Good |
sold |
Photo /
More Info. |
| 2" Max Capcity : End Mill Design for Fast Metal Removal
1/2" to 2" Capacity Standard
Vise Capacity Can Be Upgraded from 3/4" to 2-3/8"
Swivel Vise with 1 Degree Increments
V Block Design Means Quick Setup Time
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12264 | Ironworkers |
| 1976 |
Mubea |
KBL 100-50 |
Good |
sold |
Photo /
More Info. |
| 100 Ton-mechanical trype: Mubea-KBL 100-50
100 Ton
Shear 10" x 3/4" Max
Round Shear 2" 3/16
Hole Punch 2" 3/8 x 1" 3/8
T Slot 4" x 1/2"
Note:see tag pic for more details.. |
|
| Ad # 12259 | Ironworkers |
| 94 |
Scotchman |
6509 |
Good |
sold |
Photo /
More Info. |
| 65 Ton: Rated on: 65,000 PSI Tensile A 36 Mild Steel
Punching Capacity 65 ton
1-1/16" in 3/4" 58 mt
27 mm in 18 mm
Special Tooling 4" Max. Dia. 100 mm Max. Dia.
Flat Bar Shear 24" Length
1" x 6"
3/4" x 10"
1/2" x 12"
3/8" x 16"
1/4" x 24" 600 mm
25 mm x 150 mm
18 mm x 250 mm
12 mm x 300 mm
10 mm x 400 mm
6 mm x 600 mm
Opt. Saber Blade 1" x 6"
1/2" x 16" 25 mm x 150 mm
12 mm x 400 mm
Angle Shear 90° 6" x 6" x 3/8"
5" x 5" x 1/2" 150 mm x 150 mm x 10 mm
125 mm x 125 mm x 12 mm
Angle Shear 45°
(with Bar Shear) 3" x 3" x 3/8"
4" x 4" x 1/2" 75 mm x 75 mm x 10 mm
100 mm x 100 mm x 12 mm
Brake 12" 40 ton 36 mt
Brake 24" 30 ton 27 mt
Open End Brake Max. 1/4" x 5"
Flat or Angle Iron 6 mm x 125 mm
Pipe Notcher
Schedule 40 I.D. 3/4"
1"
1-1/4"
1-1/2"
2" 19 mm
25 mm
32 mm
38 mm
50 mm
Rectangle Notcher 2" x 2-1/2" x 3/8" 50 mm x 65 mm x 10 mm
90° V. Notcher 6" x 6" x 5/16" 150 mm x 150 mm x 8 mm
Channel Shear 2" to 5" Adj. 50 mm to 125 mm Adj.
Strut Shear Samples Required
Rod Shear
Round Rod (Max.)
Square Rod (Max.) 1/4" to 1-1/4", 9 Cav.
1/4" to 1", 1 Cav. 6 mm to 32 mm
6 mm to 25 mm
Square Tube Shear 1/2" to 2",
12 ga. 12 mm to 50 mm
2.75 mm
Picket Tool 1/2"
3/4"
1"
16 gauge 12 mm
19 mm
25 mm
1.6 mm
Offset Die Holder Max. 40 ton 36 mt
Strokes Per Minute in Light Material 1/4" Stroke [Punch Station] 40 spm
Strokes Per Minute in Heavy Material 3/4" Stroke [Punch Station] 17 spm
Hydraulics 2,600 psi 183 bar
Dimensions W-24"
L-60"
H-66" W-57 cm
L-152 cm
H-168 cm
Weight 2,750 lbs. 1,250 kg
|
|
| Ad # 12260 | Ironworkers |
| 93 |
Scotchman |
4014C |
Good |
sold |
Photo /
More Info. |
| 40 Ton 220 Single Phase: Scotchman 4014C
Voltage 220/ Single Phase
Specifications:• Capacity (tonnage) 40
• Throat 6"
• Shears:
Angle 3" x 3" x 1/4"
Miter (45°) 2" x 2" x 1/4"
• Punching capacities:
3/4 Mild steel 5/8"
1/2" Mild steel 1"
3/8" Mild steel 1-1/4"
• Flat bar shear:
1/2" Mild steel 8"
3/8" Mild Steel 10"
1/4" Mild Steel 12"
3/16" Mild steel 14"
• Hydraulic pressure (PSI) 1,400
• Dimensions:
Left to right 57"
Front to back 52"
Height 58"
• Weight 2,050 Lbs
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12267 | Mig & Tig Arc Welders |
| 94 |
Miller |
Dimension 400 |
Good |
sold |
Photo /
More Info. |
| KW 19 Extend Boom Arm: Miller Dimension 400
Mig Wire Feed
10ft Boom Extension
KW 19
DC Stick Optional
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12271 | Miscellaneous Presses |
| — |
Graphotype |
Stenograph |
Good |
sold |
Photo /
More Info. |
| Plate label Maker: Graphotype
For Making metal Plates like Id tags and Serial number Plates |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12266 | Plasma |
| — |
Thermal Dynamics |
Pak 150 XL |
Good |
sold |
Photo /
More Info. |
| 1" mild steel max thickness-hand held torch unit: Thermal Dynamics Plasma Cutter
•The Thermal Dynamics Pak Master 150XL offers a range of high performance, genuine cut capacity plasma cutting systems designed to cut most metals up to 1 1/2''''(38mm) using air, nitrogen, or argon/hydrogen as the plasma gas. Uses the PCH/M-120 torch, which is available in either a 70 or 90 hand configuration, or in a 180 machine style with 1 3/8'''' (35mm) diameter mounting tube and 32 pitch rack. Ideal for hand applications and can be used in many mechanized applications.
•THERMAL DYNAMICS
•1 1/2'''' Genuine Cut Capasity (Carbon Steel) 5/8 Pierce Rating Maximum Life Parts SMART LOGIC This circuit prevents damage to the unit should it be connected to high line voltage while it is linked for low voltage. Smart Start Auto Pilot Restart Exclusive Tip Saver Circuit Efficient Inverter Technology
•UNSPC CODE: 23271707
•Torch Model : PCH-120 PCM-120
•PAK MASTER 150XL SYSTEM
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12265 | Air Compressors, Rotary Screw Type |
| 2006 |
Ingersol Rand |
SSR-EP20SE |
Good |
sold |
Photo /
More Info. |
| 77 CFM-screw compressor: Ingersol Rand
Model SSR-EP20SE
20 HP
77CFM
128 PSI
includes a nice air dryer too-seperate unit not shown |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
