User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9413 | Turning Center 4 - 10 in. chuck |
|
Mori Seiki |
ZL-15S |
Good |
sold |
Photo /
More Info. |
Bar capacity, round 1.6": Bar capacity, round 1.6"
Spindle bore 2.05"
Swing over bed, Max 18.9"
Swing over cross slide 14.6"
Turning diameter, Max 9.06"
Turning length, Max 3.94"
Rapid traverse rate, X-Axis 472 IPM
Rapid traverse rate, Z-Axis 590 IPM
Spindle speeds, main spindle 50-5000 RPM
Spindle speeds, sub spindle 60-5000 RPM
Main spindle drive motor, Horsepower 10/7.5 HP
Subspindle drive motor, Horsepower 7.5/5 HP
Mori-Seiki MF-D6 CNC Control
FMB Turbo 5-42 Bar Feed
Collet Chuck on Mian and Sub Spindle
12-Position Upper Turret
Parts Catcher - Chip Conveyor
|
|
Ad # 9412 | Turning Center 4 - 10 in. chuck |
1996 |
Hardinge |
Cobra 42 |
Good |
sold |
Photo /
More Info. |
Max X-Axis travel 17.7": HARDINGE COBRA 42 2-AXIS CNC LATHE
New 1996, Serial No. C-265-T, MODEL COBRA 42
EQUIPPED WITH:
Fanuc #21TB CNC Control w/CRT
Tailstock
Collet Chuck - 12-Position Turret
10 HP Spindle Drive Motor
Chip Conveyor
CATALOGUE SPECIFICATIONS:
Bar Capacity............................... 1.625"
Maximum Turning Length..................... 14"
Maximum Turning Diameter................... 8.25"
Spindle Nose............................... A2-5"
Maximum X-Axis Travel...................... 17.7"
Max. X-Axis Traverse Rate.................. 400 IPM
Longitudinal Travel (Z-Axis)............... 14"
Max. Z-Axis Traverse Rate.................. 630 IPM
Spindle Speeds............................. to 5000 RPM
Spindle Motor.............................. 10 HP
Bar capacity 1.625"
Max turning length 14"
Max turning diameter 8.25"
Max X-Axis travel 17.7"
Longitudinal travel (Z-Axis)14"
Max X-Axis traverse rate 400 IPM
Max Z-Axis traverse rate 630 IPM
Spindle nose A2-5"
Spindle speeds to 5000 RPM
Spindle motor, HP 10HP
Fanuc #21 TB CNC Control w/CRT
Tailstock
Collet Chuck - 12-Position Turret
10 HP Spindle Drive Motor
Chip Conveyor
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9415 | Heavy Duty Large Lathe 24in. & over swing |
|
TOS |
SN71C |
Good |
sold |
Photo /
More Info. |
28"/40" x 157": Hole thru spindle 2.8"
Swing over bed ways, rated 27"
Swing over bed ways, actual 28"
Swing thru gap 40"
Swing over cross-slide 16.5"
Distance between centers 157"
Gap length 11.8"
Tailstock, spindle travel 9.4"
Tailstock, spindle taper #5 MT
(16) Spindle speeds, range 10-1000 rpm
Carriage longitudinal feeds 001-.251 ipr
Cross-Slide cross feeds 009-.125 ipr
Acu-Rite Digital Readouts
Removable Gap-Type Bed
12" 3-Jaw Chuck w/Jaws
Hardened & Ground Bed Ways
Inch-Metric Threading
(2) Steady Rests
Power Rapid Traverse
|
|
Ad # 9419 | Centering Machines |
|
Werag |
DZ11-QS-08-800 |
Good |
Sold |
Photo /
More Info. |
5.5" X 31.5" : Max work diameter capacity 5.512"
Min work diameter capacity 0.3937"
Max work length capacity 31.5"
Vise clamping range 0.3939"-5.906"
Spindle tapers #SK45
Max tool length 12.4"
Spindle speeds, range 50 to 3695 rpm
Max travel per spindle, Z-Axis 15.75"
Max travel per spindle, X-Axis 5.906"
Spindle motors 10hp
Semens Sinumerik 8401C CNC Control w/Color Graphics
(2) 8 Tool Automatic Tool Changers (1 each side)
Self-Centering Automatic Vises
Chip Conveyor - Automatic Lube system
Coolant thru the Spindle
Large Assortment of Tooling
|
|
Ad # 9407 | Centering Machines |
|
Giddings & Lewis |
Endomatic |
Good |
sold |
Photo /
More Info. |
Max work diameter capacity 8": Max work diameter capacity 8"
Min work diameter capacity .5"
Max distance between spindle faces 58"
Max drilling quill stroke 3"
Max milling feed stroke 9.75"
17 Drilling spindle speeds, range 314-1105 rpm
18 Milling spindle speeds, range 26-236 rpm
Drilling spindle feeds, range 75 - 25 ipm
Milling spindle feeds, range 0-150 ipm
(2) Drilling spindle motors, HP 3 HP
(2) Milling spindle motors, HP 10HP
Boring Capacity
Chamfering Capacity
Spot-Facing Capability
Sawing Capability
Centering Heads: (2) 3 HP (each)
Milling Heads: (2) 10 HP (each)
(1) Self Centering Hydraulic Clamping Vise
|
|
Ad # 9364 | Centering Machines |
|
G&L Fraser |
SC-5 |
Good |
sold |
Photo /
More Info. |
Work Diameter 0.50 - 6.25": 6-1/4 INCH x 60 INCH ENDOMATIC SPOTFACING AND CENTERING MACHINE
Work diameter 0.50 - 6.25"
Max work length 60"
Min work length 1.75"
Drill head motor 3 hp
Max feed stroke 3"
Center drill capacity (with adapters)1/8 - 1 1/4"
1 spot face / drilling head
1 self-centering vise with electric ½ hp drive motor
5/16 inch diameter center drill adapter
2 inch diameter spot facing tool
Live center in place of one cutter head 0.50 - 6.25
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9384 | Horizontal Machining Centers (HMC) |
1998 |
Ingersoll |
HVM 600A |
Good |
sold |
Photo /
More Info. |
Working Table Stroke 24.803"/40.55": INGERSOL MODEL HVM 600A HORIZONTAL MACHINING CENTER
X-Axis (Working Table Stroke)24.803"/40.55"
Y-Axis (Working Table Stroke)24.803"/40.55"
Z-Axis 23.62"
Feed Rate 3000ipm
Spindle Tool Adaptor HSK 63A
Spindle Max. Power 50HP
Spindle Max RPM 20000 RPM
Tool Storage 40 pockets
Chip Separator and Conveyor
Load Station with Pallet Changer
2 Machining Tombstones
Fanuc 15m Controller
Hydrostatic Spindle
|
|
Ad # 9369 | Drilling / Tapping Centers |
|
Belden |
T5000 |
Good |
sold |
Photo /
More Info. |
3/4" Diameter : Upper Joint Drives, Number 32 spindle
Upper Joint Drives, Diameter Hex 3/4"
Head Working Area, W x D 21" x 34"
Head Feed Stroke, Programmable 18"
Table Working Area, W x D 28" x 40"
Distance Floor to Head Flange 73"
Distance Head Flange to Table 37"
Spindle Speeds Range, Inf Var (RPM)150-2250
Feed Rate, Range 0-45 IPM
Rapid Traverse Rate 150 IPM
Spindle Motor, Horsepower 25HP
Belden #T5000 CNC Controls with Drilling, Deep Hole
(32) 3/4" Diameter 6-Point Hexzgonal Upper Drives
Rexroth Hydraulic System
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9411 | Gun / Deep Hole Drills |
|
Dadson |
2DS508-CM |
Good |
sold |
Photo /
More Info. |
Diameter capacity, Max 1/2": DADSON DUAL-SPINDLE DEEP HOLE DRILL
Diameter capacity, Max 1/2"
Stroke Length, Max 8"
Spindle Horsepower each 3HP@3450rpm
Spindle speeds, Infinite range rpm
Feed range, infinitely variable 0-10 IPM
Rapid range, infinitely variable 0-300 IPM
Coolant pressure 0-2000 PSI
Coolant flow rate 0-15 GPM
Ball Screw Feed - Auto Cycle
Dual Spindle Design - Bijur Lubrication
Dadson DS15-150 High-Pressure Coolant System
Collet Type Spindle Nose-Spindle Load Meter
Assortment of Drills, Guides & Collets
|
|
Ad # 9371 | Single Spindle Drill Press |
|
Brickford |
|
Good |
sold |
Photo /
More Info. |
28" Drill: Spindle-Head adjustment, vertical 17.5"
Spindle Travel Power 12"
Min-Max Spindle Nose to Table 18" x 48"
Min-Max Spindle Nose to Base 30"-60.875"
Swing to Center of Circle, Max 28"
Table Adjustment, Vertical 12"
Table Working Surface, W x L 21" x 24"
Base Dimensions, W x L 33" x 60"
Spindle Diameter 3.94"
Spindle Taper #5 MT
Spindle Speeds, Range 75-1800 rpm
Spindle Feeds, Range 004-.040 ipr
4-Spindle Multi-Spindle Drill Head
12" Riser Block
Automatic Cycling
Geared Head Design
Box-Column Design
Coolant System (Built-In) |
|
Ad # 9370 | Single Spindle Drill Press |
|
Brickford |
|
Good |
sold |
Photo /
More Info. |
21": Spindle-Head adjustment, vertical 6"
Spindle Travel Power 10"
Max Spindle Nose to Table 45.24"
Min-Max Spindle Nose to Base 41.75"-57.75"
Swing to Center of Circle, Table 20.75"
Swing to Center of Circle, Above Table 23"
Table Adjustment, Vertical 12"
Table Working Surface, W x L 16.5" x 21"
Spindle Diameter 3.81"
Spindle Taper #4 MT
Spindle Speeds, Range 75-1800 rpm
14" Riser Block (Removable)
Geared Head Design
Box-Column Design
|
|
We found 7 matching ads. Now displaying the remaining 7 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9410 | Surface Grinders |
1969 |
DOALL |
DUTYHYDRAULIC HORIZONTAL |
Good |
sold |
Photo /
More Info. |
Table working surface, W x L 6" x 18": Table working surface, W x L 6" x 18"
Grinding width, Max Dia 8"
Grinding wheel width, 1/2"
Grinding wheel, Hole Dia 1-1/4"
Longitudinal table feeds, range 5-125 FPM
Cross table in-feeds, range 0-.250 IPM"
Grinding wheel spindle motor 1 HP/3450 RPM
6" x 18" Fine Line Electro-Magnetic Chuck
Cool Grinding Coolant System (Tank & Pump)Power Elevation - Bijur Lubrication
6" x 18" DOALL HEAVY DUTY HYDRAULIC
HORIZONTAL-SPINDLE SURFACE GRINDER
New 1969, Serial No. 219-69519, Model D618-7
EQUIPPED WITH:
6" x 18" Fine Line Electro-Magnetic Chuck
Cool Grinding Coolant System (Tank & Pump)
Power Elevation - Bijur Lubrication
CATALOGUE SPECIFICATIONS:
Table Working Surface, W x L........... 6" x 18"
Grinding Wheel, Maximum Diameter....... 8"
Grinding Wheel, Width.................. 1/2"
Grinding Wheel, Hole Diameter.......... 1-1/4"
Longitudinal Table Feeds, Range........ 5 to 125 FPM
Cross Table In-Feeds, Range............ 0 to .250 IPM
Grinding Wheel Spindle Motor........... 1 HP/3450 RPM
Hydraulic System Motor................. 1.5 HP/1735 RPM
Overall Dimensions, L x D.............. 90" x 69"
Weight, Approximately.................. 2500 LBS.
NOTE: This Is A Heavy Duty Toolroom & Production
Model Machine.
|
|
Ad # 9409 | Surface Grinders |
1978 |
Thompson |
2F |
Good |
sold |
Photo /
More Info. |
Table working surface, W x L 8" x 24": Table working surface, W x L- 8" x 24"
Grinding width capacity, Max 8"
Grinding length capacity, Max 24"
Height under 12" grinding wheel 12"
Table longitudinal travel 29"
Wheelhead cross travel 9"
Grinding wheel diameter, Standard 12"
Grinding wheel width, Standard 1"
Grinding spindle speed 1800rpm
Table longitudinal feeds, range 5-75 FPM
Wheelhead cross-feeds, automatic .010-.375 IPR
Wheelhead cross-feed rapid traverse 20 FPM
8" x 24" Permanent Magnetic Chuck
Above WheelDresser - Bijur Lubrication System
Incremental Cross Slide Feed
Power Head Elevation - Coolant System (Built-In)
8" x 24" THOMPSON "F" HYDRAULIC-FEED
HORIZONTAL-SPINDLE SURFACE GRINDER
New 1978, Serial No 088-2F783087-100984, Model 2F
EQUIPPED WITH:
8" x 24" Permanent Magnetic Chuck
Above-Wheel Dresser - Bijur Lubrication System
Incremental Cross Slide Feed
Power Head Elevation - Coolant System (Built-In)
CATALOGUE SPECIFICATIONS:
Table Working Surface, W x L........... 8" x 24"
Grinding Width Capacity, Maximum....... 8"
Grinding Length Capacity, Maximum...... 24"
Height Under 12" Grinding Wheel........ 12"
Table Longitudinal Travel.............. 29"
Wheelhead Cross Travel................. 9"
Grinding Wheel Diameter, Standard...... 12"
Grinding Wheel Width, Standard......... 1"
Grinding Wheel Hole Diameter........... 3"
Grinding Wheel Surface-Feet-Minute..... 5400 SFM
Grinding Spindle Speed................. 1800 RPM
Table Longitudinal Feeds, Range........ 5 to 75 FPM
Wheelhead Cross-Feeds, Automatic....... .010 to 3/8 IPR
Wheelhead Cross-Feeds Truing, Minimum.. 6 IPM
Wheelhead Cross-Feed Rapid Traverse.... 20 FPM
Grinding Wheel Spindle Motor........... 3 HP/1800 RPM
Hydraulic System Motor................. 1.5 HP/1200 RPM
Power Elevation Motor.................. 1/3 HP/1800 RPM
Electrical System...................... 230-460/3/60
Floor Space Required, L x D............ 9'5" x 3'5"
Overall Height......................... 7'1"
Weight, Approximately.................. 4800 LBS
|
|
Ad # 9394 | DoubleDisc Grinders |
|
Besley-Bendix |
DH2-23 |
Good |
sold |
Photo /
More Info. |
grinding disc, diameter 23": BESLEY-BENDIX MODEL DH2-23 HORIZONTAL DOUBLE-END OPPOSED DISC GRINDER
Abrasive grinding disc, Diameter 23"
Abrasive thickness, Useable 2"
Max opening between abrasives 4"
(2) Spindle motors, each 4 HP
Rotary Wheel "Ferris-Wheel" Work Feed
Vibromatic Parts Feeder (Variable Speed)
Hydraulic Grinding Wheel Dresser
Load Meter - Trabon Lube System
|
|
Ad # 9393 | Centerless Grinders |
|
Cincinnati |
340-20 |
Good |
sold |
Photo /
More Info. |
Diameter capacity 1/2" to 3": CINCINNATI MODEL #340-20 "TWINGRIP"
CENTERLESS GRINDER
Diameter capacity, Nominal 1/2" to 3"
Max diameter capacity 6"
Min grnding wheel diameter 24"
Min grinding wheel width 20"
Max regulating wheel diameter 14"
Max regulating wheel width 20"
Regulating wheel speeds, Low Range 12-56 rpm
Regulating wheel speeds, High Range 56-300 rpm
Grinding wheel motor, Horsepower 40 HP
Regulating wheel motor, Horsepower 2 HP
Thru-Feed Work Rest
Push-Button Thrufeed Compensator Unit
Hydraulic Grinding Wheel Truing Attachment
Hydraulic Regulating Wheel Truing Attachment
Regulating Wheel Outboard Support
Oil Seperator
|
|
Ad # 9392 | Centerless Grinders |
1981 ? |
Cincinnati |
220-8 |
Good |
sold |
Photo /
More Info. |
Max diameter capacity 0" to 3": CINCINNATI-MILACRON MODEL #220-8 "CENTURAMIC" CENTERLESS GRINDER
Diameter capacity, Nominal
Max diameter capacity 0" to 3"
Min grnding wheel diameter 4.5"
Min grinding wheel width 17"
Min regulating wheel diameter 1"
Max regulating wheel diameter 10"
Min regulating wheel width 13"
Max regulating wheel width 1"
Regulating wheel speeds, Range 8"
Grinding wheel motor, Horsepower 15-300rpm
Regulating wheel motor, Horsepower 20 HP
Electro-Hydraulic Infeed w/Push Button 1.5 HP Compensator
Infeed Work Rest w/Parts Loader System
Automatic Hydraulic Grinding Wheel Profile Truing
Hydraulic Regulating Wheel Profile Truing
Trabon Automatic Lube System - Oil Seperator
|
|
Ad # 9382 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
1R |
Good |
sold |
Photo /
More Info. |
6" X 18" : 6" X 18" LANDIS MODEL 1R, Ltr R PLAIN
CYLINDERICAL GRINDER
Swing Over Table, Nominal 6"
Max grinding diameter 6.875"
Distance beyween centers, Nominal 18"
Grinding wheel diameter, standard 16"
Grinding wheel diameter, Max 3"
Grinding wheel hole diameter 5"
Table swivel taper 4 IPF"
Table swing angle 20 degrees
Table longitudinal feeds, infinite 2 to 240 IPM
Hydraulic Longitudinal Table Feed
Hydraulic Grinding Wheel Infeed
1/4 HP Workhead
Bijur One Shot Lubrication System
Coolant System (Tank & Pump)
|
|
Ad # 9385 | Cylindrical Grinders (O.D. & I.D.) |
|
Farrel |
OD Grinder |
Good |
sold |
Photo /
More Info. |
TRAVELING-HEAD SWING REST ROLL GRINDER, 48"/56" X 378"/440" : FARREL TWO-WHEEL TRAVELING-HEAD SWING REST ROLL GRINDER, 48"/56" X 378"/440... |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9414 | Keyseaters |
|
Davis |
5 Mechanical Keyseater |
Good |
sold |
Photo /
More Info. |
Keyway width, Maximum 1.5": Keyway width, Minimum 1/16"
Keyway width, Maximum 1.5"
Cut length w/16" cutter, Max 3"
Cut length w/20" cutter, Max 7"
Cut length w/24" cutter, Max 11"
Cut length w/30" cutter, Max 17"
Cut length w/34" cutter, Max 21"
Stroke length, Max 4.5"
Throat distance, cutter to post 18.75"
Height of work, Max 14"
Table dimensions (overall) W x L 30.25" x 31"
Table longitudinal travel 1.375"
Included taper per fot, Max 3"
Strokes per minute 33.5 spm
Motor, Horsepower/RPM 2HP
Swinging Clamp Bar
Tilting Table
Resistance Arm
|
|
We found 11 matching ads. Now displaying the remaining 11 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9402 | Gear Hobbers |
|
Liebherr |
LC-152 |
Good |
sold |
Photo /
More Info. |
Max hob slide travel 10": LIEBHERR MODEL LC-152 7-AXIS "CNC" GEAR HOBBER
Max work piece diameter 6"
Max pitch (module) 86000 PSI Steel 5DP/5-MOD
Max hob slide travel 10"
Min No. of teeth hobbed 3
Hob head swivel range +/- 45 deg
Max diameter hob 5.20"
Max hob length 7.10"
Hob spindle speed ranges 120-1200rpm
Max table rotation 150 rpm
"Quick-Change" Hob Change System, w/automatic Clamping & Unclamping of Hob Arbor
LIEBHERR "MPST" Continuous Path "CNC" Controller w/CRT for Seven (7) Axis Plus Ring Loader
Chiller for Hydraulic & Cutting Fluids
CHEMAPERM Magnetic Chip Conveyor w/Chip Cart
Two Position Ring Loader w/Two (2) Adjustable Workpiece Pockets, Including Pallet Conveyor, w/Approx. Thirty (30) Pallets, Including Elevating Station to Interface w/Ring Loader
Needs New CRT-being upgraded,..
|
|
Ad # 9403 | Gear Hobbers |
|
Barber Colman |
16-16 Multicycle |
Good |
sold |
Photo /
More Info. |
Max hob slide travel 16": HORIZONTAL GEAR HOBBER
Max rated diameteral pitch 6DP
Max rated diameter of work 16"
Max hob diameter 5"
Max hob slide travel 16"
Max distance work spindle face to tailstock ctr 44"
Work spindle thru-bore diameter 4.13"
Hob speed range 59-425 rpm
Hob feed range 015-.150i.p.r.
Main drive motor 5HP
Standard Hob Slide (+/- 45 degrees)
Anti-Friction Hob & Work Spindle Bearings
Double Thread Index Worm
Hydraulic Chucking
Hydraulically Actuated Adjustable Lever-Type Tailstock
Power Rapid Traverse for Hob Carriage
One (1) Hob Arbor (.75 Diameter)
|
|
Ad # 9416 | Gear Testing Machinery |
|
Barber Colman |
HSC HOB Inspection Instrument |
Good |
sold |
Photo /
More Info. |
Max Hob Diameter 9": Max Hob Diameter 9"
Min Hob Face Width 16"
Max Arbor Length 17.5"
Min Arbor Length 5"
Bench Space Covered by Base 16" x 31"
Overall Height, Over Index Plate 13.25"
Approximate Weight, w/o Hob or Arbor 230lbs
Headstock with Precision Spindle & Center
Tailstock with Spring Loaded Retractable Center
Arbor Drive Dog
Alignment Gage Block
Height Setting Indiactor with 0.001 inch Graduations
13 Index plates
Indiactor Stand
|
|
Ad # 9404 | Gear Hobbers |
|
Barber Colman |
16-36 |
Good |
sold |
Photo /
More Info. |
Max hob slide travel 70"-72": Max rated diameteral pitch 6DP
Max rated diameter of work 16"
Max hob diameter 5"
Max hob slide travel 70"-72"
Max distance work spindle face to tailstock ctr 80"
Work spindle thru-bore diameter 3.125"
Hob speed range 59-246 rpm
Hob feed range 015-.150i.p.r.
Main drive motor 5hp
Extended Bed 80" Center Distance Approx. 70"
Axial Travel
Back Over Arm Support
Change Gears
|
|
Ad # 9405 | Gear Shapers |
|
PICCO |
K15 Gear Tooth Chamfering & Ro |
Good |
sold |
Photo /
More Info. |
Max gear diameter 23.6": Max gear pitch 1.6DP
Max gear diameter 23.6"
Cutter spindle speed 1450/2100/2800rpm
Range of number of teeth in work piece 10-88
Tilt of work piece spindle +20/-25 deg
Cutter spindle motor 1.5 HP
Work piece motor 1.5 HP
Complete Set of Index Chnage Gears for setting number of teeth in work piece
Coolant System
Controls for Manual & Full Automatic Operation
Single Cam for Radius, Cusp or Tangential Pointing of Internal & External Gears
Work Piece Positioning Device
Foot Actuated Work Piece Clamping
Operator's Manual, Parts List
|
|
Ad # 9417 | Gear Shapers |
|
Gleason |
14 Bevel Gear Generator |
Good |
Sold |
Photo /
More Info. |
Max cone distance (2.75"-3.5") 12": Max cone distance (2.75"-3.5") 12"
Max cone distance (1" face) 11.125"
Min cone distance 0"
Max pitch angle (90 degree shafts)84deg/18min
Min pitch angles 5 deg/42min
Max ratio 10/1
Max pitch diameter (see table)
Max face width 3.5"
Diameter of hole in work spindle (large end) 3.906"
Diameter of spindle thru-hole 3.063"
Hydraulic Work Chucking Cylinder, w/Draw-In Bar & Nuts
Stock Dividing Gauge
Upper & Lower Tool Setting Gauge w/Proof Block
Cutter Length Gauge
Standard Tool-Holders
Extended Tool-Holders
Tool & Gear Cabinet w/Good Assortment of Change Gears
|
|
Ad # 9400 | Gear Shapers |
|
Gleason |
12 Straight Bevel |
Good |
sold |
Photo /
More Info. |
Max cone distance (2.75"-3.5") 12": GLEASON MODEL 12 STRAIGHT BEVEL GEAR GENERATOR
Max cone distance (2.75"-3.5") 12"
Max cone distance (1" face) 10.5"
Min cone distance 0"
Max pitch angle (angular gears) 90 degrees
Min pitch angles 5 deg/18min
Max ratio 10/1
Max pitch diameter 24"
Max face width 3.5"
Max pitch (nominal) 3DP
Diameter of hole in work spindle (large end) 2.292"
Diameter of hole through spindle 3.06"
Manual Work Chucking
Upper & Lower Setting Gage w/Proof Block
Standard Feed Cam G12W-1038A
One (1) Set of Standard Tool Blocks
Change Gears w/Tool & Gear Cabinet
Roughing Yoke & Bushing
Self Contained Coolant System
|
|
Ad # 9418 | Gear Hobbers |
|
Barber Colman |
16-16 Horizontal |
Good |
sold |
Photo /
More Info. |
Max workpiece diameter 16": Max workpiece diameter 16"
Max travel of hob carriage 16"
Max hob diameter 5"
Max hob slide travel 16"
Max distance work spindle face to tailstock ctr 25"
Diameter of work spindle bore 3-1/8"
Double Thread Index Worm and Anti-Friction Hob Spindle
Automatic Power Forced Lubrication to all Work Elements
Coolant Tank Pump & Piping
Power Rapid Traverse for Hob Carriage
One (1) Hob Arbor
Assortment of Change Gears
Operators Manual
3 machines availble
|
|
Ad # 9401 | Gear Testing Machinery |
|
Gleason |
#4 Angular Bevel Gear Tester |
Good |
sold |
Photo /
More Info. |
Max diameter of gears 3": Max diameter of gears 3"
Range of shaft angles 30 to 180 Deg
Bore of heads 1.25"
Bore of quills .75"
Spring-Pressure Pinion Head
Slide Mounted Gear Head
Pedstal Base
Manual Chucking
Motor Attachment w/Fractional HP, 1000 RPM Motor
One (1) Set of Spindles (Quills)
Operator's Manual, PArts List
|
|
Ad # 9383 | Gear Testing Machinery |
|
Unit-A-Matic |
8600 |
Good |
Sold |
Photo /
More Info. |
Dimensions Over Pins/Balls 0.000"-9.00": UNIT-A-MATIC MODEL 8600 DIMENSIONS OVER PINS GEAR CHECKER
DOP Checker
Dimensions Over Pins/Balls 0.000"-9.00"
Repeatibility 0.0001"
Weight 240lbs
DRO with Inch/Metric Switch
Roller Bearing Part Locator
Heavy Duty Steel Cart with Drawer
|
|
Ad # 9372 | Gear Shapers |
|
Fellows |
10-2 |
Good |
sold |
Photo /
More Info. |
10" Diameter: Max pitch diameter, external 10"
Max pitch diameter, internal 10"
Max diameteral pitch spur 4DP
Max diameteral pitch helical 5DP
Min helix angle (w/proper guides)45 degrees
Max face width 2"
Max O.D. of work & fixture 19"
Max distance between table surface and bottom of cutter spindle, w/cutter ram in exterme upward position 10"
Max distance centerline of cutter spindle to work spindle centerline 9.055"
Standard Straight Spur Guide
Single Speed 5 HP main Motor w/3-Step Sheaves for Stroke Speed Variation (400-800, 450-900, 500-1000 strokes/min.)
One, Two, or Three Cut Dial Selection
Hydraulic Servo-Controlles Infinitely Variable Depth Feed
Hydraulic Fixture Clamping in Work Spindle
Assortment of Change Gears
Standard Sub-Base Height
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9408 | Vibratory Equipment |
|
Deburrer |
VTG5024 |
Good |
sold |
Photo /
More Info. |
Capacity, Cubic Feet, Maximum 7 CU FT: Capacity, Cubic Feet, Maximum 7 CU FT
Channel Width 11"
Discharge Height 34"
Main Motor, Horsepower/RPM 5 HP/1735 RPM
Foot Print 5' x 5'
Vibra-Finish #VF7 Controls (s/n 7299) w/Variable Speed Dial
Auto-Clean Cycle Timer
Vibrator Elapsed Time Meter
Polyurethane Chamber Liner
(2) Drains
|
|
Ad # 9406 | Vibratory Equipment |
|
Deburrer |
|
Good |
sold |
Photo /
More Info. |
Capacity, Cubic Feet 10 CU FT: 10 CU FT VIBRATORY DEBURRER
Capacity, Cubic Feet 10 CU FT
Tub O.D. 48"
Tub Depth 12"
Motor, Horsepower/RPM 3 HP/1730 RPM
Overall Width 5'
Overall Height 4'
Weight, Approximately 1200lbs
Cast Polyurethane Liner
Media
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|