User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 23 matching ads. Now displaying the remaining 23 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14473 | Turning Center 4 - 10 in. chuck |
1986 |
Mazak |
QT 8 |
Good |
sold |
Photo /
More Info. |
: Mazak QT-8 CNC Lathe
T-2 Control
1986
6" chuck
tailstock
tool eye
Great machine that will hold +/-.0005 with out
a problem. I need to make room for other
equipment. |
|
Ad # 13716 | Turning Center 4 - 10 in. chuck |
87 |
Mazak |
QT8 |
Needs Work |
sold |
Photo /
More Info. |
: CONTROL: MAZATROL T-2
MAX. SWING: 11"
STANDARD CUTTING DIA: 4"
MAX. CUTTING DIA: 6"
CUTTING LENGTH: 10"
SPINDLE BORE: 1.97"
SPINDLE SPEED: 4500 RPM
NUMBER OF TOOLS: 8
X AXIS STROKE: 3.75"
Z AXIS STROKE: 11.4"
Note: needs board replaced -have new board
but
not tested machine |
|
Ad # 13707 | Turning Center 11 in. & over chuck |
1992 |
Okuma |
LC 30 |
Good |
sold |
Photo /
More Info. |
12" Chuck: Okuma LC 30
OSP 5000-L Control
Tail stock
RPM 3000 Max
3" Spindle Bore
12" Chuck included (not shown in pictures)
Swing: 19.69 in Max
Centers:38.58 in
|
|
Ad # 13656 | Turning Center 4 - 10 in. chuck |
1994 |
Hardinge |
Cobra LC 65 |
Needs Work |
sold |
Photo /
More Info. |
10" x 30": Hardinge CNC Lathe
Model: Cobra LC65
Spindle Bore 2 1/2"
RPM 4500
25 HP
Control Fanuc Series 21-T
Tail Stock
12 Tool Turret
Chip Conveyor
7,000 HRS on meter
Machine powers up and has alarm issues that needs
minor work, has a few alarm codes
|
|
Ad # 13653 | Turning Center 4 - 10 in. chuck |
1984 |
Hardinge |
SB 3 GN Superslant |
Good |
sold |
Photo /
More Info. |
8" x 16": Hardinge SB 3 GN Superslant
Year: 1984
Control: Fanuc GN6
8 Tool Turret
8 Tool End Working Turret (tail stock)
13 HP
Spindle Bore: 1 7/8"
4000 RPM
Bar Feeder 20ft (omnibar 45FS)
rigging/loading fee approx: $1500
2 machines just alike available-one running other needs new boards-will sell for parts additional $3500.00 |
|
Ad # 11655 | Turning Center 4 - 10 in. chuck |
1980 |
HES |
300 |
Very Good |
Sold |
Photo /
More Info. |
12" x 27": H.E.S Model 300
12" x 27"
3 Jaw 8" chuck
5000 Rpm
Fanuc GN6 Controll
1" 3/8" Spindle bore
12 Tool Turret |
|
Ad # 11654 | Turning Center 11 in. & over chuck |
1984 |
Monarch/Sydney |
TC1 |
Very Good |
sold |
Photo /
More Info. |
16" x 24": Monarch/Sydney TC-1
16" x 17"
12" Chuck
25Hp
50-2500 Rpm
8 Tool Turret Holder OD
6 Tool Turret Holder ID
3"- 1/16" Spindle Bore
GE MarkCentury 2000 Controll
|
|
Ad # 13628 | Turning Center 4 - 10 in. chuck |
1993 |
Okuma |
LNC 8C |
Needs Work |
sold |
Photo /
More Info. |
9" x 20": Okuma LNC 8C
10" Chuck
12 Station Tool Changer
TailStock
2 ½ Bore
Chip Conveyor
New bearings in motor
OSP5020L CNC Control
OSP5020L/OSP500l-G Special Functions Manual &
Alarms & Error Manual
Approximate Weight: 10000 Lbs
|
|
Ad # 12607 | Turning Center 11 in. & over chuck |
1996 |
Monarch |
TC-3 |
Good |
sold |
Photo /
More Info. |
28" Swing: Monarch TC-3
28" Swing
Voltage 480
Allen Bradley 9 series control
10 Tool Turret |
|
Ad # 12495 | Turning Center 4 - 10 in. chuck |
1997 |
Mazak |
Quick Turn 20 |
Good |
sold |
Photo /
More Info. |
QT 20: Mazak
Quick Turn 20 Universial
Mazatrol T-1
8 Tool Post
3 Jaw 10"
Tail Stock |
|
Ad # 12424 | Turning Center 4 - 10 in. chuck |
1980 |
Mori Seiki |
SL-2H |
Good |
sold |
Photo /
More Info. |
10" Jaw 3: MORI SEIKI 2-AXIS CNC TURNING CENTER/CHUCKER
(NO TAILSTOCK)
MODEL: SL-2A
SPECIFICATIONS:
SWING OVER BED/FRONT COVER...................
22.4"/15.7"
SWING OVER CARRIAGE/CROSS SLIDE..............
20"/13.7"
STROKE END/ RECOMMEND WORK PIECE DIA. .......
9.4"/7.8"
MAX. LONGITUDINAL TRAVEL.....................
16.1"
PROGRAMMABLE SPINDLE SPEED RANGE.............
35-3500 RPM
HOLE THRU SPINDLE............................
2.2"
APPROX. WEIGHT...............................
8,360 LBS
EQUIPPED WITH:
-YASNAC
-10" 3-JAW HYD. CHUCK
-8 POSITION TURRET |
|
Ad # 14139 | Turning Center 4 - 10 in. chuck |
2011 |
HAAS |
ST-20 |
Excellent |
sold |
Photo /
More Info. |
15" x 20": **LOW HOURS 852 hours cycle start time**
HAAS ST-20
SAMCHULLY HS-08 8" HYDRAULIC 3 JAW CHUCK
MAX TURNING DIA. = 15"
MAX TURNING LENGTH = 20.5"
CHIP CONVEYOR BELT TYPE
HIGH INTENSITY LIGHTING
2" BAR CAPACITY
20HP SPINDLE
A2-6 SPINDLE NOSE
15" COLOR LCD DISPLAY
USB PORT
1MB MEMORY
RIGID TAPPING
QUICK CODE PROGRAMMING
CHUCKER (NO TAILSTOCK)
PRICE INCLUDES THE FOLLOWING TOOLHOLDERS:
(3) 1" BORING BAR HOLDERS
(1) 1.25" BORING BAR HOLDER
(5) 1.5" BORING BAR HOLDERS AND
(2) FACE TOOL HOLDERS |
|
Ad # 14067 | Turning Center 11 in. & over chuck |
2000 |
Daewoo |
Puma 400b |
Good |
sold |
Photo /
More Info. |
18" x 40": Dawoo Puma 400b
SPECS
Bar Capacity:4.62 "
# Axis:2
Power:50 hp
Max RPM:2000 rpm
Turning Dia:18.9 "
Swing:28 "
Machining Length:44.1 "
Dimensions:153" x 94"
Weight:19,640
Control:FANUC 18iTB
|
|
Ad # 14054 | Turning Center 4 - 10 in. chuck |
1990 |
Wasino |
LJ-6 MC |
Good |
sold |
Photo /
More Info. |
16" x 24": Wasino LJ - 6 MC
1990
16"swing x 24"centers
Chuck Size:10 "
Bar Capacity:2.875 "
# Axis:3
Power:30 hp
Max RPM:3500 rpm
Turning Dia:9 "
Swing:16 "
Machining Length:24 "
Tailstock:Yes
Weight:11700
Control:FANUC 0TC |
|
Ad # 14056 | CNC Lathe w/sub Spindle or Live Tooling |
1989 |
Hardinge |
Conquest 42 |
Good |
sold |
Photo /
More Info. |
: Hardinge Conquest 42
GE Fanuc OT CNC Control
SPECIFICATIONS:
Swing Over Upper Way - Maximum 19-1/2"
Swing Over Lower Way - Maximum 14-1/2"
Distance Between Centers - Maximum 13-13/16"
Rapid Traverse Rate X-Axis - Maximum 472 IPM
Rapid Traverse Rate Z-Axis - Maximum 630 IPM
Hole Through Spindle 1-7/8"
Motor 5.5 KW
Spindle Speed 50-5,000 RPM
Electrics 208-230V/3Ph/60Hz
Approximate Floor Space Required with Chip System
122" x 54" x 68"
Approximate Machine Weight 9,000 Lbs.
10-STATION VERTICAL TURRET WITH LIVE TOOLING:
X-Axis Travel - Maximum 5-7/16"
Z-Axis Travel - Maximum 13-41/64"
Turning Diameter - Maximum 9-3/32"
Live Tooling Holders (Speed Range in 1-RPM Steps)
Up to 4,000
2ND OPERATION SUB-SPINDLE:
Distance from Spindle Face to Casting Face -
Maximum 17-1/2"
Travel - Maximum 11-1/2"
Rapid Traverse and Return Rate 300 IPM
AC Anolog Drive (Speed Range in 1-RPM Steps) Up to
3,000 RPM
|
|
Ad # 14049 | Combination (teach lathe) CNC / Manual |
|
Bridgeport |
Romi EZ Path |
Good |
sold |
Photo /
More Info. |
16.5" x 40": Brideport EZ Path
EMI Controler And DOM
16.5" swing x 40"
Dorian Turret Included
Swing Over Bed:16.5"
Swing Over Cross Slide:8"
Distance Between Centers:40"
Height Of Centers:8"
Hole Thru Spindle:2"
Spindle Speeds (24):37.5 - 3,000 RPM
Spindle Nose:A2 - 5
Bed Width:12"
Bed Height:13-5/32"
Rapid Traverse Rate X/Z Axis:250"/Min.
Spindle Taper:1°26'
Quill Bore Taper MT#:MT#4
Quill Diameter mm(in.):2"
Quill Travel mm(in.):6.3"
Horsepower:8 H.P.
|
|
Ad # 13315 | Turning Center 4 - 10 in. chuck |
2002 |
Haas |
SL 10 |
Good |
sold |
Photo /
More Info. |
3-Jaw 6" Chuck: Haas SL 10
Year 2002
3 Jaw 6" Chuck
12 Tool Changer
SWING OVER CROSS SLIDE8"
MAXIMUM CUTTING LENGTH14"
MAXIMUM CUTTING DIAMETER11"
X AXIS TRAVEL6.25"
Z AXIS TRAVEL14" |
|
Ad # 13314 | Turning Center 4 - 10 in. chuck |
1989 |
Okuma |
LB 15 |
Good |
sold |
Photo /
More Info. |
10" chuck-big bore 2.5": Okuma LB 15
3 Jaw 10" Chuck
Control OSP5000-L-G
2" 1/2 Spindle Bore
12 Tool Changer
Hydraulic Tail stock
Swing over bed: 15.75"
Maximum turning diameter: 9.84"
Maximum work length: 9.06"
runs good , no issues
loading/rigging fee $1200.00
|
|
Ad # 11229 | Turning Center 11 in. & over chuck |
1980s |
Okuma |
LSN-10 |
Needs Work |
sold |
Photo /
More Info. |
: Used Okuma LSN-10 CNC Lathe
21" swing x 50" centers
15 HP
10 station twin turrets
12" 3 Jaw Chuck
control: OSP 3000 |
|
Ad # 12160 | Turning Center 4 - 10 in. chuck |
1983 |
Mazak |
QT-10 Universal |
Good |
sold |
Photo /
More Info. |
10" x 20": Mazak QT 10 Universal
Maztrol T-1
8 Tool Holders
Chip Conveor
3 Jaw 8" Chuck |
|
Ad # 12158 | Combination (teach lathe) CNC / Manual |
2002 |
Ecoca |
PC 1840 |
Good |
sold |
Photo /
More Info. |
18" x 40": Ecoca PC 1840
2-2500 RPM
3" Spindle Bore
4 Jaw 12" Chuck
2 Steady Rests 6" and 4" Diameters |
|
Ad # 12042 | Turning Center 4 - 10 in. chuck |
1980s |
Jones & Lamson |
TNC COMBI 4512 |
Good |
sold |
Photo /
More Info. |
10" x 20": Jones & Lamson
Economiser TNC COMBI 4512
Control Fanuc OT
6 Turret Tool Holder
10" swing x 20"
1" 1/8 Spindle Bore |
|
Ad # 12043 | Turning Center 4 - 10 in. chuck |
1980s |
James & Lamson |
TNC1508 |
Good |
sold |
Photo /
More Info. |
8" x 12": James & Lamson
8 Tool Turret
8 inch 3 jaw chuck
Model TNC 1508
Control GN0
Voltage 440/3 phase |
|
We found 39 matching ads. Now displaying the remaining 39 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13725 | General Purpose Lathe 15in. to 23in. swing |
? |
American Pacemaker |
18 x 30 |
Good |
sold |
Photo /
More Info. |
22"swing x 32"centers: American Pacemaker
22"swing over bed x 32"centers
4 Jaw 18" Chuck
12"swing Over Cross Slide
13-800 Rpm
2" 1/4" spindle bore
Inch Threads Only
208/3 Phase |
|
Ad # 13724 | General Purpose Lathe 15in. to 23in. swing |
|
LeBlond |
2E:19 x 80 |
Good |
sold |
Photo /
More Info. |
19" x 84": Leblond Regal Lathe
19" x 84"
12" over cross slide
3 Jaw 12" chuck
no steady rest
inch threading only
1-3/4 spindle bore
38-1500 RPM
550/3 Phase motor but was running on 480/3
no issues runs good
|
|
Ad # 13654 | Heavy Duty Large Lathe 24in. & over swing |
1945 |
Monarch |
36 NN |
Good |
sold |
Photo /
More Info. |
53"swing x 84" centers: Monarch 36 NN
Year: 1945
Voltage: 220 3Phase
RPM 6 - 303
threading:inch only
53" Swing x 84" between centers
44" over crosslide
4 Jaw Chuck 40"
Face Plate: 48"
Tail Stock 4 Jaw 19 1/2" live center chuck
Fabricated Steady Rest
includes some tooling-holders
Box w/tool holders |
|
Ad # 11689 | Tool Room Lathe 8in. to 14in. swing |
1970s |
Hardinge |
HC |
Very Good |
sold |
Photo /
More Info. |
9" x 13": Hardinge HC
9" x 13"
8 Station turret
Model CTA Tool Post (Thread unit)
1" 1/8 Spindle Bore
125-3000 RPM |
|
Ad # 11678 | Tool Room Lathe 8in. to 14in. swing |
? |
Hendy |
|
Good |
sold |
Photo /
More Info. |
8" x 36": Hendy
8" Swing over carriage x 36"
3 jaw 8" chuck
1- 1/16" Spindle bore
|
|
Ad # 12742 | General Purpose Lathe 15in. to 23in. swing |
|
Hercules |
1660 |
Good |
sold |
Photo /
More Info. |
16" x 60": Hercules 1660 Lathe
16" x 60"
3" 1/4 Spindle Bore
Taper Attachment
Gap Bed
Rapid Travers
Foot Brake
3 Jaw 10" Chuck
4 Jaw 12" Chuck
20" Face Plate
Inch and metric Threads |
|
Ad # 12742 | General Purpose Lathe 15in. to 23in. swing |
|
Hercules |
1660 |
Good |
sold |
Photo /
More Info. |
16" x 60": Hercules 1660 Lathe
16" x 60"
3" 1/4 Spindle Bore
Taper Attachment
Gap Bed
Rapid Travers
Foot Brake
3 Jaw 10" Chuck
4 Jaw 12" Chuck
20" Face Plate
Inch and metric Threads |
|
Ad # 12738 | Tool Room Lathe 8in. to 14in. swing |
|
South Bend |
31" 1/2 |
Good |
sold ? |
Photo /
More Info. |
9"swing x 32"centers: SouthBend Lathe #31" 1/2
9" swing x 32" center |
|
Ad # 12739 | Tool Room Lathe 8in. to 14in. swing |
|
Hardinge |
HCT |
Good |
sold |
Photo /
More Info. |
: Hardinge HCT
6 Station Tool Turret
3 Jaw Chuck 4" |
|
Ad # 11586 | Heavy Duty Large Lathe 24in. & over swing |
1964 |
VDF |
V1250 |
Good |
sold |
Photo /
More Info. |
50"swing x 20ft centers: 1964 VDF V1250
50"swing x 20 ft centers
40" over the cross slide
spindle bore:4-1/2" first 11" length stepped down to
3-1/4" chuck has 4.5" bore
4 Jaw Chuck 48"
Steady Rest 24" max opening
inch/metric threads
50 HP
Tail Stock
Rapid Travel
RPM Range:300 max
rigger fee to load: approx: $2000.00 |
|
Ad # 12698 | Heavy Duty Large Lathe 24in. & over swing |
1946 |
American |
27" |
Good |
sold |
Photo /
More Info. |
28" x 20 Ft: American Lathe
Model 27"
28" swing x 20 Ft centers
RPM 11 - 450
4 Jaw 28" Chuck
2 Steady rests 8" and 12"
20" swing over cross slide
includes a toolpost grinder |
|
Ad # 11575 | Vertical Turret Lathe (VTL) |
? |
King Machine |
36" |
Very Good |
sold |
Photo /
More Info. |
40" VTL: King Machine
3 Jaw 36" Chuck Max turning Dia. 40"
4 Jaw Plate on Top of 3 Jaw Chuck
30" Max Hieght
0-25 degree cutter swing.
8-245 RPM
Feeds 0.010-0.5 Low Speed
0.003-0.125 HighSpeed
|
|
Ad # 11574 | General Purpose Lathe 15in. to 23in. swing |
1980s |
Profitmaster |
16 x 80 |
Very Good |
sold |
Photo /
More Info. |
16 x 80 : Profit Master
16" x 80"
Taper Attachment
Steady rest
Tail Stock
3 Jaw 12 inch Chuck
4 Jaw 12 inch Chuck
Digital Readout (needs calibration)
25-2000 RPM
2 inch Spindle Bore
Inch and metric Threads
Coolent |
|
Ad # 12672 | Tool Room Lathe 8in. to 14in. swing |
1997 |
Nardini |
1440E |
Excellent |
sold |
Photo /
More Info. |
14" x 40": Nardini MS 1440E
14" x 40"
220/3 Phase
25-2000 RPM
inch and metric threads
3 Jaw 8" Chuck
8" Over Cross Slide
4" Steady Rest
2" Spindle Bore
Quick change tool post w/ a few holders
machine was fully tested and inspected -all good.. |
|
Ad # 11504 | Tool Room Lathe 8in. to 14in. swing |
1942 |
Monarch |
|
Good |
sold |
Photo /
More Info. |
14" x 30": Monarch
14" x 30" Actual Swing and Center to Center
Taper In working Condition
24 x 1000 RPM
Steady Rest
220/ 3 Phase
3 Jaw 11" Chuck
Comes will Tooling
|
|
Ad # 11507 | General Purpose Lathe 15in. to 23in. swing |
1943 |
Monarch |
? |
Good |
sold |
Photo /
More Info. |
16 x 48: Monarch
16" x 48"
Taper
Tooling
3 Jaw 9 inch Chuck Shown
4 Jaw 12 inch Comes with
Steady Rest
22 x 487 RPM |
|
Ad # 11506 | Vertical Turret Lathe (VTL) |
30s-40s |
Gisholt |
? |
Good |
sold |
Photo /
More Info. |
57" dia chuck x 42" 15 HP: Gisholt Machine 15 HP
57" Chuck
62" Max swing
24" Arm extension travel
40" ? height Under Arm
Has had 6000ibs Turned on table fine
Comes with tooling. |
|
Ad # 11447 | General Purpose Lathe 15in. to 23in. swing |
|
Kent |
KLS 2280 |
Very Good |
sold |
Photo /
More Info. |
22" X 80" Spindle Bore 3" 1/8" (82mm): Kent Engine Lathe
22" x 80" gap bed
Spindle Bore 3" 1/8" (82mm)
10Hp 16 Speed
16-1600 RPM
Jog Button 4 way Rapid Traverse
Inch and Metric Dials and Rules
Metric and Standard Threads
49 (7/16 to 80) TPI
37 (0.5 to 80) mm
Feeds
Longitudinal 0.0015 - 0.0772"
Cross 0.006 - 0.0303"
no chuck with lathe |
|
Ad # 11403 | Tool Room Lathe 8in. to 14in. swing |
|
Lodge & Shipley |
14 |
Fair |
sold |
Photo /
More Info. |
14 x 80 : Swing: 14"
Distance Between Centers: 80"
Taper Attachment
Tailstock
2 chucks included 3 & 4 jaw
|
|
Ad # 11384 | Heavy Duty Large Lathe 24in. & over swing |
|
Greaves Klusman |
|
Good |
sold |
Photo /
More Info. |
40" x 100" : 40" Swing Over Bed
100" Center Distance
32 inch 4 Jaw chuck
2" Spindle Hole
28-200 RPM? |
|
Ad # 11387 | General Purpose Lathe 15in. to 23in. swing |
1965 |
Mazak |
Yamazaki 18 |
Very Good |
sold |
Photo /
More Info. |
18" x 100": 18" x 100"
9 inch over carriage
2" 1/16" Spindle Bore
12 inch 4 Jaw Chuck
25-1050 RPM |
|
Ad # 11377 | Heavy Duty Large Lathe 24in. & over swing |
1953 |
Sidney Tool |
|
Very Good |
sold |
Photo /
More Info. |
24" x 72": Sidney
24" x 72"
Swing Over Bed Ways 24"
Swing Over Cross Slide 13-1/2"
Center Distance 72"
Spindle Hole 2-3/4"
Spindle Speeds 17 To 1,000 Rpm's
Chuck Size 18" 4 Jaw
Feeds .0075 To 240
Threads Inch 1-1/2 To 90 TPI
Tail Stock Taper # 4Morse |
|
Ad # 11382 | Tool Room Lathe 8in. to 14in. swing |
|
LeBlond |
|
Fair |
sold |
Photo /
More Info. |
12" x 24": 8" Swing over Carriage
24" Between Centers
Taper attachment (may need work)
Spindle hole 1" 1/4"
9 inch 3 Jaw Chuck |
|
Ad # 11376 | Heavy Duty Large Lathe 24in. & over swing |
1940s |
American tool Works |
24" |
Good |
sold |
Photo /
More Info. |
24" x 50" : American Tool Works 24" Heavy duty Lathe
24" x 50"
18" 4 Jaw Chuck
Swing
27" 1/2" Over bed
17" over Carriage
Range of threads per inch 1/2 to 28
15 - 280 RPM
Taper Attachment
Spindle Hole Diameter 2 1/8
Centers Morse Tape No.5
Steady rest capacity 9"
220/3phase
|
|
Ad # 11383 | General Purpose Lathe 15in. to 23in. swing |
1965 |
Mazak |
Ajax 18 |
Very Good |
sold |
Photo /
More Info. |
18" x 100": Swing Over Bed Ways 18"
Swing Over Cross Slide 9"
Center Distance 100"
Spindle Hole 2" 1/16
Spindle Speeds 25 To 1,500 Rpm's
Threads Inch 4 To 56 TPI
Threads Metric 0.5 To 7 |
|
Ad # 14144 | Heavy Duty Large Lathe 24in. & over swing |
|
Axelson |
38" |
Good |
sold |
Photo /
More Info. |
38": Axelson 38" Lathe |
|
Ad # 14105 | General Purpose Lathe 15in. to 23in. swing |
|
Sirco |
PA 20 - 4 |
Good |
sold |
Photo /
More Info. |
4" Spindle Bore 20" x 80": Sirco lathe,
4"spindle bore
84" between centers
taper attachments
3jaw and 4 jaw, steady rests
12 speeds 22-1500 RPM
|
|
Ad # 13371 | Vertical Turret Lathe (VTL) |
|
Bullard |
36 |
Good |
sold |
Photo /
More Info. |
36": Bullard 36" VTL
30HP
3 Jaw 34" Chuck
36" Max swing
220/440 Wired 480
18" Cutter Travel
6 Tool Turret
|
|
Ad # 14059 | General Purpose Lathe 15in. to 23in. swing |
|
Sharp |
1760K |
|
sold |
Photo /
More Info. |
17" x 60": Sharp 1760K
Swing over the bed 17"
60" Between centers
Swing over cross Slide 11"
Spindle Nose D1-6
2" Spindle Bore
50-1800 Rpm
Inch and metric threads
4 Jaw Chuck
6 Jaw Chuck |
|
Ad # 13327 | Vertical Turret Lathe (VTL) |
1940s |
Bullard |
42 |
Needs Work |
sold |
Photo /
More Info. |
42" table dia: Bullard 42"
Chuck 42"
Max swing 46"
Voltage 220
Machine runs fine needs some work to keep machine in gear |
|
Ad # 14055 | General Purpose Lathe 15in. to 23in. swing |
|
Mazak |
860 |
Good |
sold |
Photo /
More Info. |
19" x 96": Mazak 860 High Speed Precision Gap Bed Manual
Lathe.
19"swing x 96"centers
everything works on the machine including coolant
system ( probly needs to be pludged tho )
8ft bed
3 Phrase 230 powered
come with: stock 4jaw and Bison 15-3/4" 3jaw chuck
will swing little under 19" with gap bed in tacked
or up to 24" with gap bed taken out
Also comes with: Steady rest and Tail Stock. |
|
Ad # 12227 | Hollow Spindle/Big Bore Engine Lathes |
90s |
Summit |
20 x 80 |
Good |
Sold |
Photo /
More Info. |
20" x 80" 4 inch Spindle Bored: Summit
20" x 80"
12inch 3 Jaw Chuck
4 inch Spindle Bore
inch/metric threads
12" Swing over Crosslide
220/ 3 Phase
Steady Rest
Follwer Rest |
|
Ad # 12234 | Heavy Duty Large Lathe 24in. & over swing |
|
American |
24 |
Good |
sold |
Photo /
More Info. |
24" swing x 17ft: American 24"
24" swing x 17 ftcenters
11-450 RPM
16" x over cross slide
2" 1/4 Spindle Bore
Power Rapid traverse on carriage
21" 4 Jaw Chuck
Steady Rest
Voltage 440/ 3 Phase |
|
Ad # 12228 | General Purpose Lathe 15in. to 23in. swing |
|
Leblond |
20" x 60" |
Good |
sold |
Photo /
More Info. |
20" x 60" : Leblond
20" x 60"
3 Jaw Chuck 15"
4 Jaw Chuck 18"
8-1000 RPM
Voltage 440/3 Phase
1" 1/2 Spindle Bore |
|
Ad # 12162 | Vertical Turret Lathe (VTL) |
|
Bullard |
42 |
Good |
sold |
Photo /
More Info. |
3 Jaw 42": Bullard 42"
6 Station Turret
42" Chuck 3 Jaw
Voltage 480
|
|
Ad # 12010 | Vertical Turret Lathe (VTL) |
|
Schiess |
164 |
Good |
sold |
Photo /
More Info. |
48" width 42" hieght: Schiess 164
5 Turret Tool Holder
47" Chuck T slotted
Voltage 440/3 phase
4-125 RPM
48" x 48" aprrox working area |
|
Ad # 11950 | General Purpose Lathe 15in. to 23in. swing |
1990s |
Victor |
1630B |
Excellent |
sold |
Photo /
More Info. |
16" x 30": Victor 1630B
7.5 HP
16" x 30"
Swing over gap 23"
Swing over cross slide 10"
Speed 33-2000
Spindle Bore Diameter 2" 1/32"
3 Jaw Chuck
4 - 56 TPI
0.5 - 7 mm
Anilam Pro Digital Read Out |
|
Ad # 13765 | Vertical Turret Lathe (VTL) |
|
King |
46 |
Needs Work |
sold |
Photo /
More Info. |
40 HP 46" Chuck: King Machine VTL
46" Chuck
6 Tool Turret
Cross slide
Prototrack DRO track 102
36" Arm Travel
43" inch Under Tool Turret
40HP
Wired 460 Volts
Machine works for the most part but has minor electrical issues.
|
|
Ad # 11903 | General Purpose Lathe 15in. to 23in. swing |
1980s |
Summit |
? |
Good |
sold |
Photo /
More Info. |
18" x 72": Summit Lathe
18" x 72"
10" 6 Jaw chuck
14" Swing over carriage
3" spindle Bore
22-1500 Rpm
7 inch Steady Rest
Follower rest |
|
We found 37 matching ads. Now displaying the remaining 37 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14474 | Horizontal Machining Centers (HMC) |
90s |
TSUGAMI |
MA5 |
Good |
sold |
Photo /
More Info. |
8 Pallet :: 450mm x 450mm: TSUGAMI MA5 Horizontal MACHINING CENTER
8-PALLET CNC
HORIZONTAL
64-POSITION TOOL
CHANGER
#40 TAPER SPINDLE -
6000 RPM
FANUC 11M CNC CONTROL
no chip conveyor
X Axis - 560mm
Y Axis - 350mm
Z Axis - 580mm
Pallet Size - 450mm x
450mm
Max. Work Size - 450mm
x 450mm x 420mm
Max. Work Weight -
250kgs
Max. Tool Length -
330mm
Max. Tool Diameter -
90mm Standard
Max. Tool Weight -
9kgs
Standard
Spindle Taper - 40BT
Spindle Speeds - 35-
6000rpm
manuals on disc
loading/rigging fee:
$800.00
|
|
Ad # 11766 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1980s |
Lagun |
100 |
Excellent |
sold |
Photo /
More Info. |
Lagun Matic 100E 3 AXIS CNC: Lagun Matic 100E
3 Axis CNC
9" x 42" Table
Year: 1980s
Serial: 18180
Voltage: 220 3 Phase
Control: Dynapath Delta Series
Model : Detal 20-ME
Serial : 64560
|
|
Ad # 13715 | Vertical Machining Centers (VMC) |
1993 |
Kiwa |
1310 Mustang CNC |
Good |
sold |
Photo /
More Info. |
20" x 50": 1993 Kiwa 1310 Mustang CNC
fanuc O-M Controll
Travel:
X Axis: 51.2"
Y Axis: 20.1"
Z Axis: 22.0"
Spindle Speed: 100-4000rpm
Spindle Taper: 40
Number of Tools: 25 |
|
Ad # 11700 | Vertical Machining Centers (VMC) |
1979 |
Roku-Roku |
Vertimac-0 |
Very Good |
sold |
Photo /
More Info. |
16" x 20" x 12": Roku-Roku
Vertimac-0
Serial 3296
Travels
16" x 20" x 12"
8 Tool Turret
220 Volt
Fanuc System 5M
Liner Ways |
|
Ad # 11699 | Vertical Machining Centers (VMC) |
1979 |
roku-roku |
vertimac-1x |
Needs Work |
sold |
Photo /
More Info. |
20" x 30" x 16": Roku-Roku
Vertimac 1X
Serial 731
1979
30 Tool Turret
220 volt
Travels
20" x 30" x 16"
Square Ways
Fanuc System 5M
|
|
Ad # 13657 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1997 |
Servo |
5000 |
Good |
sold |
Photo /
More Info. |
10" x 54": Servo Model 5000
Control Servo
3 Axis
Year: 1997
Voltage: 220 Single Phase
10" x 54" table
40 Taper Spindle
Air Draw Bar |
|
Ad # 11682 | Vertical Machining Centers (VMC) |
1980 |
United States Machinetool |
16B |
Very Good |
sold |
Photo /
More Info. |
30" x 48": United states machine tool CNC
Model 16b
30" x 48" Table
32" Throat
20" Z Travel
Dynapath System 10 cnc |
|
Ad # 12683 | Horizontal Machining Centers (HMC) |
1995 |
mori seiki |
M-25FH |
Good |
sold |
Photo /
More Info. |
: Mori Seiki M25-FH
Description: Pallet Size: 304.80mm x 304.80mm
Number of Pallets: 1
X-Axis Travel: 350.52mm
Y-Axis Travel: 368.30mm
Z-Axis Travel: 199.90mm
Tool Changer: 12
|
|
Ad # 11555 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1990s |
Bridgeport |
Eztrak |
Good |
sold |
Photo /
More Info. |
9"x52" Table Series 1-3 axis: Bridgeport Series 1 Eztrak
9" x 48" Table
3 Axis cnc
Controller BPC 2M
Machine needs cleaning but runs fine |
|
Ad # 12639 | Vertical Machining Centers (VMC) |
1996 |
Deckel |
DMU 60T |
Needs Work |
sold |
Photo /
More Info. |
24" x 20" x 20": Deckel DMU 60T
Heidenhain Control TNC426/430
spindle taper sk 40
17000 hours apx.
25 Tool Changer
X Travel 24"
Y Travel 20"
Z Travel 20"
Table 24" x 30"
90 Degree Swivel head.
Box way machine
Needs a servo drive card & power supply
repaired.
GERMAN MACHINE |
|
Ad # 12608 | Vertical Machining Centers (VMC) |
1996 |
Monarch |
VMC 75 |
Good |
sold |
Photo /
More Info. |
: Monarch VMC 75b
Allen Bradley 9 series Controls
480 Volts
Rs-232 Port
26 Tool Changer
|
|
Ad # 11515 | Vertical Machining Centers (VMC) |
1992 |
Leblond Makino |
FNC60-A20 |
Very Good |
sold |
Photo /
More Info. |
18 x 32: Leblond Makino FNC60
18" x 32" Table
20 Tool Changer
Fanuc seires 0-M Controll unit
Travels 23" x 15" x 15"
|
|
Ad # 15313 | Vertical Machining Centers (VMC) |
1997 |
Mori seiki |
F-M2/40 |
Good |
sold |
Photo /
More Info. |
18" x 40": Mori-Seiki FM2 Vertical Machining Center
Mitsubishi MSC-521 control
Table: 18’ X 43” (457.2mm X 1092.2mm)
X axis: 31.5” (800mm)
Y axis: 16” (406.4mm)
Z axis: 20” (508mm)
Spindle speed to 8000 rpm
20 station auto tool changer
40 Taper spindle |
|
Ad # 13444 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1994 |
Milltronics |
3VX |
Good |
sold |
Photo /
More Info. |
3 Axis CNC: Seiki X-L Model 3VX
Milltronics Centurion 1 Control
Voltage 220
3 Axis Machine
10" x 50" Table
30 Taper Quickchange Tool holder
60-4200 RPM
RS 232 and Floppy Port
Year 1994 |
|
Ad # 11415 | Vertical Machining Centers (VMC) |
2001 |
Atrump |
Maxi-Mill V3EC |
Good |
sold |
Photo /
More Info. |
Maxi-mill With 4th Axis 18" x 34" Table: Atrump Maxi Mill V3EC
18" x 34" Table
10 Station Tool Changer
4th Axis
Centroid Controll Unit
Model M39ATC Serial # 3421
|
|
Ad # 12438 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Tree |
J-350 CNC |
Good |
sold |
Photo /
More Info. |
3 Axis 10" x 52": Tree Quick Man 350
Dynapath Delta CNC
10" x 52"
3 Axis
Box Way
Cat 40 Spindle
220/3 Phase |
|
Ad # 14145 | Vertical Machining Centers (VMC) |
1994 |
KITAMURA |
MYCENTER 3 |
Good |
sold |
Photo /
More Info. |
16.1" x 35.4": MANUFACTURED NEW1994
TABLE SIZE16.1" x 35.4"
MAXIMUM TABLE LOAD1,100 LBS
SPINDLE NOSE TO TABLE TOP4.9" - 23.0"
X AXIS TRAVEL30"
Y AXIS TRAVEL17.9"
Z AXIS TRAVEL18.1"
RAPID TRAVERSE RATE X & Y AXES945 IPM
RAPID TRAVERSE RATE Z AXIS945 IPM
CUTTING FEED RATE0 - 390 IPM
SPINDLE TAPERCAT 40
SPINDLE SPEEDS20 - 10,000 RPM
SPINDLE MOTOR (2 SPEED GEARED)15 HP
TOOL CHANGER CAPACITY20 STATION ATC
TOOL CHANGE TIME (TOOL TO TOOL)1.2 SECONDS
TOOL CHANGE TIME (CHIP TO CHIP)3.2 SECONDS
MACHINE DIMENSIONS (APPROXIMATE)102" x 98"
x 104"
MACHINE WEIGHT (APPROXIMATE)12,900 LBS
EQUIPPED WITH:
FANUC O-M CNC CONTROL WITH 9" CRT,
RS-232C PORT INTERFACE FOR DNC OPERATION,
NIKKEN 8" 4TH AXIS ROTARY TABLE, TAILSTOCK
RIGID TAPPING (SYNCHRONOUS / SOLID TAPPING),
HELICAL INTERPOLATION, SPINDLE ORIENTATION,
DAIKIN SPINDLE CHILLER, 160 METERS MEMORY,
FULLY ENCLOSED SPLASH GUARDING, WORK LIGHT,
ALL AVAILABLE MANUALS. |
|
Ad # 13347 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1990s |
Acer |
Ultima |
Needs Work |
sold |
Photo /
More Info. |
10" x 50"-3 axis cnc/manual: Acer Ultima
Control Centroid Model 10
10" x 50" Table
Voltage 220/ 3 Phase
3 Axis CNC
80-4200 RPM
|
|
Ad # 14061 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2006 |
atrump |
A one |
Excellent |
sold |
Photo /
More Info. |
3 Axis 10" 54": Atrump 3 axis CNC knee mill - w/Following
options
Centroid M400S controller
220V 1phase
wired for CNC 4th axis
power knee
power drawbar
auto lube/coolant/way covers/splash guard (not
shown)
work light
10"x54" table
Cat30 spindle
Compression tapping software
horizontal attachment
plust tooling and cart
This mill was purchased in 2006 but never used
as
the original owner passed away. Perfect setup
for
home shop or commercial use w/220v 1Ph setup.
The mill has been kept in an insulated shop at
all
times and kept well oiled, and can be seen
under
power by appointment.
|
|
Ad # 13339 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Fryer |
MB-8 |
Needs Work |
sold |
Photo /
More Info. |
10" x 50" table: Fryer Bed Mill
Model MB-8
Control Anilam 3300 MK
Cat 40 Spindle
10" x 50" table
Air Power Draw Bar
60-4200 RPM |
|
Ad # 14050 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1999 |
Supermax |
YCM-40 |
Good |
sold |
Photo /
More Info. |
3 Axis Centriod: Supermax YCM-40
Centroid Controller-3 Axis Centriod
Table-W:9 "
Table-L:42 "
Travel-Long:38 "
Travel-Cross:15.5 "
Power:5 hp
RPM:4200 rpm
|
|
Ad # 14020 | Vertical Machining Centers (VMC) |
2000 |
Hurco |
VMX50 |
Good |
sold |
Photo /
More Info. |
26" x 50": 2000 Hurco VMX50 CNC Mill
Travels:
X axis: 50"
Y axis: 26"
Year of Manufacture: 2000
Manufacturer: Hurco
Model: VMX50
Condition: Used
Specifications:
X-AXIS TRAVELS 50"
Y-AXIS TRAVELS 26"
Z-AXIS TRAVELS 24"
TABLE SIZE 59" x 26"
RAPIDS X,Y / Z 1,181 / 787 IPM
SPINDLE SPEED 8,000 RPM
SPINDLE TAPER CAT-50
TOOL CHANGER 30 TOOL |
|
Ad # 14018 | CNC Vertical Milling Machines w\o ATC |
|
Bridgeport |
V2XT |
Good |
sold |
Photo /
More Info. |
3 Axis :9" x 49": Bridgeport 2XT
DX-32 Control
X AXIS TRAVEL 25"
Y AXIS TRAVEL 12"
Z AXIS TRAVEL 5"
THROAT DISTANCE 20.9"
RAPID TRAVERSE RATE X & Y AXES 250 IPM
CUTTING FEED RATE ALL AXES 0.1 - 250 IPM
SPINDLE SPEEDS 60 - 4,200 RPM
SPINDLE MOTOR 3 HP
APPROX. DIMENSIONS 62" x 60" x 104"
APPROX. WEIGHT 3,000 LBS |
|
Ad # 11228 | Vertical Machining Centers (VMC) |
1980s |
Okuma |
MC-4VA |
Good |
sold |
Photo /
More Info. |
16" x 39" Table.: 16" x 39" Table.
30 Taper Spindle.
20 Tool Holder-atc.
Some Tooling Included.--little bit
Control Model 0SP5000M-G
Addition Serial No. 60100422
Standard catalog specs below-please verify
TABLE SIZE 39.37" x 16.14"
MAXIMUM TABLE LOAD 1,100 LBS
SPINDLE NOSE TO TABLE TOP 7.8" - 25.5"
X AXIS TRAVEL 25.59"
Y AXIS TRAVEL 16.14"
Z AXIS TRAVEL 17.72"
RAPID TRAVERSE RATE X & Y AXES 591 IPM
RAPID TRAVERSE RATE Z AXIS 512 IPM
CUTTING FEED RATE 0.1 - 160 IPM
SPINDLE SPEEDS 50 - 4000 RPM
SPINDLE MOTOR 15 HP
TOOL CHANGER CAPACITY 20 STATION ATC
MAXIMUM TOOL WEIGHT 17.6 LBS
WEIGHT, APPROX. 12,900 LBS
DIMENSIONS, APPROX. 107" x 102" x 107"
OKUMA OSP-5000M-G CNC CONTROL WITH 9" COLOR CRT,
RS-232C PORT INTERFACE FOR DNC OPERATION,
SWING ARM SIDEMOUNT TOOL CHANGER,
RIGID BOX WAY MACHINE, WORK LAMP,
STANDARD COOLANT SYSTEM WITH TANK & PUMP, |
|
Ad # 11227 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1983 |
Yeong Chin |
YC-60 |
Good |
sold |
Photo /
More Info. |
17" X 48" Table: 17" x 48" Table size
Table travels: 33" x 18"
Fanuc 6M control.
Manuel Tool Change |
|
Ad # 14012 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1990s |
Acer |
Analam 1100M |
Good |
sold |
Photo /
More Info. |
2 Axis Analam 10" x 54": Acer 2 Axis CNC, Analam 1100M control
10x54 table, variable speed head
Maxi torque power draw bar
Everything in good working order |
|
Ad # 13996 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Supermax |
|
Good |
sold |
Photo /
More Info. |
3 axis 9" x 49": Supermax 3 Axis CNC Vertical Mill
• Table Size - 9" x 49"
• Travels X-Axis - 30"
• Travels Y-Axis - 15"
• Quill Travel - 5"
• Knee Travel - 15"
• Spindle Taper - #40
• Spindle Speeds(2) - 60-4200 RPM
• Spindle Motor - 3 HP
• Quill Diameter - 3.94"
• Approximate Machine Weight - 3,100 Lbs.
• Approximate Machine Floor Space - 73-1/8"FB
x
104"LR x 85"H |
|
Ad # 14002 | Vertical Machining Centers (VMC) |
2001 |
Leadwell |
V40 |
Good |
sold |
Photo /
More Info. |
20" x 40": 2001 Leadwell V40 cnc vertical mill
40" x 20" travel
24 tool turret
Cat 40 tool
15HP spindle/ 10,000rpm
have all manuals
Hpcc(high precision contour control)
RISC processor data server w/ 2.1 gob hard drive
with tooling
Has chip conveyor
External Cooler
10,000 rpm capability with chiller
Quick tool changer carasel
Fanuc series 18-M control
NC3 Renishaw Laser tool setter, High speed skip
rigging /loading fee-call for quote |
|
Ad # 13966 | Vertical Machining Centers (VMC) |
1992 |
Okuma |
3VA |
Good |
sold |
Photo /
More Info. |
12,000 RPM Spindle: Okuma And Howa
Fanuc series OM
X-axis travel -- 22.8"
Y-axis travel -- 14.1"
Z-axis travel -- 17.7"
Rotary 4th axis
Fanuc OM control
12,000 rpm spindle (geared head)
10 hp spindle with high/low range
Spindle chiller
Cat 40 taper
Box ways
20-tool ATC
Chip auger
Coolant system
RS-232 port |
|
Ad # 13274 | CNC & Retrofit Knee / Bed Mills w/o ATC |
90's? |
Clausing Kondia |
FV-1 |
Good |
sold |
Photo /
More Info. |
2 axis 10" x 50" Proto Trak: Clausing Kondia FV-1 mill w/
Proto Trak MX 2 -2 axis cnc or manual control w conversational programming & graphics software
Machine can be run manually also
Air Draw Bar-Kurt
3 HP main motor
coolant mist unit
variable speed head
10" x 50" table
auto lube
spray mister
wired Voltage 220/3
2 Axis cnc or manual control
3 axis DRO -quill scale and X & Y
manuals included
Note: main control console was recently replaced with new unit
Machine runs good and is ready to go! |
|
Ad # 12059 | CNC Parts and Accessories |
|
Sugino |
|
Good |
sold |
Photo /
More Info. |
Z axis units: Z axis Sugino Drilling/Taping units
Fanuc Controll A06B-03103-B703-R
10 Units Price is for ea. |
|
Ad # 12054 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1990s |
Dyna Myte |
2800c |
Good |
sold |
Photo /
More Info. |
: Dyna Myte 2800C
6" x 12" table
Dyna 2800C Control
Table Size 15 3/4" X 6 1/4"
Table Travel X-Axis 8"
Table Travel Y-Axis 6"
Vertical Head Travel 7"
Distance from spindle nose to table top 3.5" -
10.5"
Distance from spindle center to column 8.3"
Main Motor 1 1/4 HP
Spindle Taper ISO-30
Spindle Speed Range 0-10,000 RPM
Rapid traverse 100"/min
Cutting Feed Rate 60"/min
Max endmill capacity 1/2"
Weight 690 LBS
Voltage 110 Volts
|
|
Ad # 12039 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1990s |
Bridgeport Proto trak |
|
Good |
sold |
Photo /
More Info. |
9" x 48" Proto Trak 2 axis: Bridgeport Proto Trak 2 axis
3 axis read out
9" x 48" table
4000 RPM head
|
|
Ad # 12044 | Vertical Machining Centers (VMC) |
1988 |
Chiron |
FZ 22 W |
Good |
sold |
Photo /
More Info. |
12" x 24" Twin Pallet: Chiron FZ 22W
Control Fanuc OM
Voltage 440/3 Phase
12" x 24" Twin Pallet Machine
22 plus tool changer |
|
Ad # 12045 | Vertical Machining Centers (VMC) |
1984 |
Chiron |
FZ 16 |
Good |
sold |
Photo /
More Info. |
10" x 16" Twin Pallet: Chiron FZ16
Control System 6
10" x 16" Twin Pallet
10 Tool Changer
|
|
Ad # 11880 | Vertical Machining Centers (VMC) |
1995 |
Fadal |
904-1 |
Excellent |
sold |
Photo /
More Info. |
30" x 16" x 20": Fadal 904-1
Year 1995
Wired 220/3 Phase
Machine Control: Fadal CNC 88HS
Table Size: 39" x 16"
Machine Travels (X/Y/Z): 30" x 16" x 20"
Spindle to Table: Max 24"
Table Capacity: 2,736 Lbs.
Spindle Taper: Cat 40
Spindle Speeds: 80 - 10,000 RPM
Rapid Traverse Rate (X/Y/Z): 900 / 900 / 700 IPM
Maximum Cutting Feed Rate: .1 - 400 IPM
Tool Changer Style: Carousel
Tool Changer Capacity: 21 Stations
Max Tool Length: 15"
Max Tool weight: 15 Lbs.
Spindle Drive: 15 HP
|
|
Ad # 11878 | Vertical Machining Centers (VMC) |
99 |
Chevalier |
2040 VMC |
Excellent |
Sold |
Photo /
More Info. |
20" x 40" : Chevalier 2040 VMC
Control: Fanuc 0-MD
Travels 40" X 20" Y 20" Z
RAPID TRAVERSE RATE X, Y & Z AXES 590/590/472 IPM
CUTTING FEED RATE 0.04 - 300 IPM
SPINDLE TAPER CAT 40
SPINDLE SPEEDS 60 - 6000 RPM
SPINDLE MOTOR 15 HP
TOOL CHANGER CAPACITY 20 POSITION ATC
MAXIMUM TOOL WEIGHT 15 LBS
MACHINE WEIGHT, APPROX. 11,000 LBS
MACHINE DIMENSIONS, APPROX. 107" x 91" x 99"
|
|
We found 34 matching ads. Now displaying the remaining 34 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13726 | Horizontal Boring Mills |
1991 |
Union |
BFT 90/3-3 |
Good |
sold |
Photo /
More Info. |
63"X x 48"Y x 56.5"Z Travels: Union Horizontal Boring Mill
4" Spindle
30" Boring Travel/Quill
49" x 55 1/2" table-indexable
63"X x 48"Y x 56.5"Z Travels
16-1600 Rpm Spindle Speed
NMTB 50 taper Spindle
Wired 460/ 3 Phase
Tail Stock included
no facing head
manuals
Note: machine has a relay issue on table in.out feed mechanism needs relay electrical work approx: $1500.00 to repair |
|
Ad # 13650 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
Series 1 |
Good |
sold |
Photo /
More Info. |
9" x 49": Bridgeport Series I
2 HP
80-4200 RPM Head J series
9" x 49"
Power Feed X
Anilam Wizard 450 DRO X and Y
Mitsityo Quill Scale
Wired 230/ 3 Phase |
|
Ad # 11677 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
True Trace 2 |
Very Good |
sold |
Photo /
More Info. |
9" x 42" Bridgeport tracer mill: Bridgeport True Trace
9" x 42" Table
Milling Head # J-60351
True Trace #s 1053-01
1573 |
|
Ad # 11677 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
True Trace 2 |
Very Good |
sold |
Photo /
More Info. |
9" x 42" Bridgeport tracer mill: Bridgeport True Trace
9" x 42" Table
Milling Head # J-60351
True Trace #s 1053-01
1573 |
|
Ad # 13605 | Universal Mills (Horizontal / Vertical) |
1977 |
Sajo |
UF 52 DM STR |
Good |
sold |
Photo /
More Info. |
11" x 49": Sajo AB Sandens
Model UF 52 Duo Mill Combination Miiling
Machine
Table 49" x 11"
Travels 33" x 8" x 18"
Table Feeds 12
Table Swivel 45 degrees either side
5 Hp
Spindle Taper # 40NMTB
110-1800 RPM
Note: includes vise and a few holders
Price New in 1970s $22,950 |
|
Ad # 12740 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
J series Head |
|
sold |
Photo /
More Info. |
9" x 32": Bridgeport Series 1
J Series head-step pulley
9" x 32" Table
Grizzly Industrial DRO
Great For the home Shop!! |
|
Ad # 12740 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
J series Head |
|
sold |
Photo /
More Info. |
9" x 32": Bridgeport Series 1
J Series head-step pulley
9" x 32" Table
Grizzly Industrial DRO
Great For the home Shop!! |
|
Ad # 12699 | Vertical Boring Mills |
|
AMC |
C-4 |
|
sold |
Photo /
More Info. |
cylinder bore: AMC Cylinder Boring mill
Model C-4
RPM 50-660
19" Boring travel
x axis has power feed
travel 48" ?
no milling heads included
table 18" x 60"
4 boring spindles 2"-11"
runs well |
|
Ad # 11505 | Universal Mills (Horizontal / Vertical) |
1950s |
Cincinnati |
No 3 |
Good |
sold |
Photo /
More Info. |
15" x 62" Table: Cincinnati No 3
Vertical and horizontal Boring Mill
Tilting Head
50 Taper?
Comes with indexing head
Tooling
Vise etc.
|
|
Ad # 14205 | Horizontal Boring Mills |
? |
Wotan |
B - 85 |
Good |
sold |
Photo /
More Info. |
3" Spindle -49" x 49": Wotan B 85
12 Hp
42" x 38" Table Rotates 360
degrees
3" Spindle
Anilam Wizard 900 DRO.w/(Quill
Feed)
spindle speed: 9- 1000 RPM
40" x 49" Table Travels
40" Spindle Head Travel
Electronics Replaced with PLC
Note 18" of bed way has deep
scratches
told
this does not effect tolerance,shown in
pix
Rigging/loading fee: $2000.00
|
|
Ad # 11425 | Horizontal Boring Mills |
60s? |
Super Mill |
MDR 4" |
Good |
sold |
Photo /
More Info. |
4" Spindle 48" x 60" Rotary Table. Out Board Support: Super Mill J Horizontal Boring Mill # MDR 4"
48" x 60" Rotary Table 360 degree movement
Out Board Support
Travels :60" Vertical, 67" X axis ,80" Y axis,
4" Spindle with 31.5" travel #6MT
max height spindle center to table :60"
Includes manuals
7-1000 Rpm-21 speeds
feed range per revolution of spindle: 0.001 to 0.47 # of feeds: 9
Feed rate 0.00165 - 0.5 3 axis digital readout-trax
threads per inch: 4 to 120TPI
50 taper
20HP
Includes lots of tooling
Note:needs minor work on limit swiches & poer draw bar-very minor
Out Board Support included
Dimensions: 18ft x 9.5ft x 11ft
weight 30,800
includes some tooling: QC spindle adapter W/ holders & 2 tapping heads & some 50 taper tooling 10pcs
rigging/loading fee quoted at $2500.00 |
|
Ad # 11402 | Knee Mills (Bridgeport Type) |
1982 |
Yeougchin Machinery |
Super Max YC 1 1/2 vs |
Good |
sold |
Photo /
More Info. |
9" x 48" Table 60-4200 RPM: Super Max
Variable Speed 60-4200 RPM
9" x 48" Table
|
|
Ad # 11386 | Knee Mills (Bridgeport Type) |
|
BridgePort |
J |
Needs Work |
sold |
Photo /
More Info. |
BridgePort : 9" x 42" table: 9" x 42" Table
Table has play issues
Machine runs fine
Very rebuildable,if needed
80-2720 Rpm
|
|
Ad # 11380 | Horizontal Mills |
|
cincinnati |
no 4 |
Good |
sold |
Photo /
More Info. |
16" x 76" Table: Cincinnati Horizontal Milling Machine Model No. 4 Dual
Cincinnati Horizontal Milling Machine
Table Travels, Longitudinal: 42"
Max. Distance Spindle Center to Table Top: 20"
Spindle Speeds: 16 - 1,600 RPM
Table Feed Rates: 3/8 - 90 In/Min
Max. Cutter Dia. w/Overarms: 15inch |
|
Ad # 12408 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
series 1 |
Fair |
sold |
Photo /
More Info. |
9" x 42": Bridgeport
Series 1
9" x 42" Table
J series head
Powerfeed X
80-2720RPM
|
|
Ad # 11348 | Knee Mills (Bridgeport Type) |
|
Acer |
Ultima 3VS |
Fair |
sold |
Photo /
More Info. |
Acer 3VS 42" x 9" table : Acer Ultima 3VS
3hp
42" x 9" table
28" x 12" travel
Digital readout
40-4500 Rpm |
|
Ad # 11348 | Knee Mills (Bridgeport Type) |
|
Acer |
Ultima 3VS |
Fair |
sold |
Photo /
More Info. |
Acer 3VS 42" x 9" table : Acer Ultima 3VS
3hp
42" x 9" table
28" x 12" travel
Digital readout
40-4500 Rpm |
|
Ad # 14053 | Universal Mills (Horizontal / Vertical) |
|
Cincinnati |
No 5 |
Good |
sold |
Photo /
More Info. |
21" x 81": Cincinnati No. 5 HP
Horizontal milling machine with vertical head.
50 NMTB taper, quick change tooling,
10 HP 220 volt single phase motor,
table size 21 X 89,
Travel 14 X 52,
speed 16-450 RPM,
feed 3/4-30 IPM.
Good condition, under power. |
|
Ad # 14053 | Universal Mills (Horizontal / Vertical) |
|
Cincinnati |
No 5 |
Good |
sold |
Photo /
More Info. |
21" x 81": Cincinnati No. 5 HP
Horizontal milling machine with vertical head.
50 NMTB taper, quick change tooling,
10 HP 220 volt single phase motor,
table size 21 X 89,
Travel 14 X 52,
speed 16-450 RPM,
feed 3/4-30 IPM.
Good condition, under power. |
|
Ad # 12235 | Universal Mills (Horizontal / Vertical) |
|
OKK |
MH-3P |
Good |
sold |
Photo /
More Info. |
14" x 64" rotating head: OKK MH-3P mill
14" x 64" Table
Rotating Head 360 Degrees
16" x 36" Travels
Voltage 440/3 Phase |
|
Ad # 12231 | Knee Mills (Bridgeport Type) |
|
Summit |
11" x 52" |
Good |
sold |
Photo /
More Info. |
11" x 52" table: Summit
11" x 52" table
50-3650 RPM
Voltage 440
50 Taper
Fagor DRO
Power X and Y |
|
Ad # 12230 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
series II |
Good |
sold |
Photo /
More Info. |
11" x 56": Bridgeport Series II
50-3500 RPM
Voltage 440/3 Phase
11" x 56" Table
50 Taper
Powerfeed X and Y
Anilam DRO |
|
Ad # 12213 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
|
Good |
sold |
Photo /
More Info. |
9" x 42": Bridgeport 9" x 42" Table
80-2750 RPM
220/3 Phase |
|
Ad # 12214 | Knee Mills (Bridgeport Type) |
|
Brideport |
|
Good |
sold |
Photo /
More Info. |
9" x 42" Table: Bridgeport
9" x 42" Table
r-8 spindle
Bridgeport Powerfeed |
|
Ad # 13303 | Knee Mills (Bridgeport Type) |
|
Kearney & Trecker |
No 2 Rotary Head |
Good |
sold |
Photo /
More Info. |
16" x 30": Kearney & Trecker Milwaukee
No 2 Rotary Head Machine
Sony Dro X,Y and Knee Z
Wired 440
16" x 30" Table
16" Rotary Table
360 Degree Head rotation
4 Inch offset head Total 8"
|
|
Ad # 13304 | Horizontal Mills |
|
Nichols |
Horizontal |
Good |
sold |
Photo /
More Info. |
7" x 21": Nichols
Horizontal Mill
Slotting Mill
Single Op.
7" x 21" Table |
|
Ad # 12157 | Universal Mills (Horizontal / Vertical) |
1989 |
Supermax |
|
Excellent |
sold |
Photo /
More Info. |
50 taper 11" x 51" : Specification
Description
Table Size
11"X51"
Spindle Taper
# 40
Spindle Feeds
.0 To .240 IPM
Spindle Speeds Variable
85 To 3,800 Rpm's
Spindle Quill Travel
5"
Spindle Tilt
+/- 45 Degrees
Spindle Swivel
+/- 45 Degrees
Spindle To Table Min / Max
6-3/4" / 18-3/4"
Saddle Travel In & Out
13"
Table Travel Cross
30"
Knee Travel
20"
Table / Knee Feeds
.075 To .150 I.P.R.
Main Motor
5Hp.
Horizontal Spindle
40 Taper
Horizontal Spindle Speeds
85 To 1,300 Rpm's
Horizontal Spindle Motor
5 Hp.
Weight
6,500 Lbs.
Chrome Knee
Yes
Digital Readout
Yes (SONY)
|
|
Ad # 13243 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
Series I |
Good |
sold |
Photo /
More Info. |
9" x 32": Bridgeport Series I
Fagor 3 Axis DRO
220 Single Phase converter
9" x 32" Table
X Axis Power Feed
Vise "NOT" included
|
|
Ad # 13219 | Planer Mills |
|
Ingersoll |
|
Good |
sold |
Photo /
More Info. |
42" x 18ft: Ingersoll Planer Mill
42" x 18ft Table
36" x 16ft Travel 48" under Milliing head
4 Milling Heads
50 NMTB Tool Holders
220/440 wired 440 3 Phase
50HP
DC Motors for table travel
Pendent Controll
Table in great shape
Ways in Great Shape
Machine holds tight tolerance. |
|
Ad # 12041 | Universal Mills (Horizontal / Vertical) |
1981 |
Jet |
HVM-2 |
Good |
sold |
Photo /
More Info. |
9" x 42" Power Feeds : JET (DAHLIH) Model HVM-2
Turret Type Vertical & Horizontal Milling
Machine
- Table Size 9” x 42”
Travel:
- Longitudinal 25-1/2”
- Cross 10”
- Vertical 17-3/4”
- Vertical Spindle:
- Spindle Speeds (8) 250-3150 RPM
- Quill Travel 4”
- Spindle Taper 40 NMTB
- Swivel Angle (L&R) 90º
- Distance Spindle Nose to Table 2-3/4” – 20-1/2”
Horizontal Spindle:
- Spindle Speeds (6) 55-1250 RPM
- Taper of Spindle 40 NMTB
- Distance Spindle to Table Top 0 – 17-3/4”
Motors:
- Horizontal Spindle 2 HP
- Vertical Spindle 2 HP
- Longitudinal Feed 1 HP
- Coolant Pump 1/8 HP
- Weight 3,300 lbs.
EQUIPMENT & FEATURES:
- Variable Power Quill Feed
- Variable Power Longitudinal Feed
- Power Cross Feed – Variable
- Rapid Traverse
|
|
Ad # 12009 | Horizontal Boring Mills |
1974 |
Shibura |
BT-8D |
Excellent |
sold |
Photo /
More Info. |
72" x 60" x 48": Shibaura Horizontal Boring Mill
Travels 72" x 60" x 48"
20-1000 RPM
Feed 0.0009 to 0.15
36" x 48" table
Control AC100V DC24
Tail Stock |
|
Ad # 12009 | Horizontal Boring Mills |
1974 |
Shibura |
BT-8D |
Excellent |
sold |
Photo /
More Info. |
72" x 60" x 48": Shibaura Horizontal Boring Mill
Travels 72" x 60" x 48"
20-1000 RPM
Feed 0.0009 to 0.15
36" x 48" table
Control AC100V DC24
Tail Stock |
|
Ad # 12013 | Vertical Bed Mills |
|
Wadkin Ltd |
WL 175 |
Good |
sold |
Photo /
More Info. |
48" X 24" X 48": Wadkin Ltd
Vertical Mill
Voltage 220/ 3 phase
Table 24" x 48"
48" travel in the Z axis
72 - 3120 RPM
Feed 0-80 inches/ min |
|
Ad # 11902 | Knee Mills (Bridgeport Type) |
? |
Wells-Setting |
|
Excellent |
sold |
Photo /
More Info. |
10" x 52" Table: Wells-Setting
Voltage 220/ 3 Phase
10" x 52" Table
60-4300 RPM
Travels X 42" Y 20"
Powerfeed on X
Box Ways |
|
We found 4 matching ads. Now displaying the remaining 4 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11769 | Swiss Type Automatic |
1996 |
Traub |
TNM28 |
Good |
sold |
Photo /
More Info. |
1" x 8": CNC TRAUB
Year: 1996
Model: TNM28
Serial 5N142-752-06.95
Voltage 208/3Phase
Controll TX8H
Bar Feed 20ft
Chip Conveyor
1" bar capacity x 8"
Main Drive
5Hp at 100% duty cycle 10hp at 25%
RPM 63-6300
Bar Diameter 5mm - 28mm ( 3/16" x 1"-
1/16")
Turret Slide
Travels X 200mm ( 7"- 3/4")
Transverse Stroke X- axis 60mm ( 2" 1/4")
Number of tools: 8
Plunge Slides X2 Axis
Number 4
Plunge Travels 1" 3/4" (43mm) |
|
Ad # 12807 | Automatic Bar Machines |
|
Davenport |
Oversize B |
Good |
sold |
Photo /
More Info. |
7/8": Davenport Model B Oversized
7/8" Max
5 Spindle
Head Gap 0.002
12 Ft Bar Feed
Back finishing deburr
Spindle Alining
Note: price includes bar feeder only |
|
Ad # 13380 | Swiss Type Automatic |
1992 |
CITIZEN |
E16J |
Good |
sold |
Photo /
More Info. |
16mm Max bar: Citizen
E16J
Spindle Hole Dia:0.630 " / 16mm
RPM:10000 rpm
Power:10hp / 7.5 kW
# Axis:4
Control:CITIZEN |
|
Ad # 12012 | Swiss Type Automatic |
1985 |
Citzen |
F 12 |
Good |
sold |
Photo /
More Info. |
: Citzen F12
Swiss Type Screw Machine
Dual Turret
Fanuc System 3T
Hydralic Bar Feed |
|
We found 17 matching ads. Now displaying the remaining 17 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14472 | Tapping / Threading Equip. |
1996 |
HYUNDAI |
SPT-V30T |
Good |
sold |
Photo /
More Info. |
23.6" X 15": 1996 HYUNDAI MODEL SPT-V30T CNC DRILLING &
TAPPING CENTER
YASNAC MX-3 CNC CONTROL
SPECIFICATIONS:
TABLE SIZE 23.6" X 15"
TRAVEL
- X AXIS 19.7"
- Y AXIS 11.8"
- Z AXIS 11.8"
SPINDLE MOTOR 10 HP
MAX SPINDLE SPEED 8000 RPM
SPINDLE TAPER BT-30
TOOL CAPACITY 10 TOOLS
manuals
EQUIPPED WITH:
Coolant System; Manuals
rigging/loading fee: 600.00 |
|
Ad # 13637 | Single Spindle Drill Press |
2003 |
Ocean Machinery |
Avenger MDL 1000/1 |
Good |
sold |
Photo /
More Info. |
: Ocean Machinery Avenger MDL 1000/1
CNC DRILL LINE
Siemens 840D
13 HP
|
|
Ad # 11641 | Radial Drill Press |
70s? |
Carlton |
12ft x 26" |
Excellent |
sold |
Photo /
More Info. |
12 ft arm 26" Colum: Carlton
12ft Arm
26" Diameter Colum
Travels
X = 12ft
Y = 12ft
Z= 24"
Base is 16ft x 12ft
very powerful machine |
|
Ad # 14306 | Single Spindle Drill Press |
2002 |
Controlled Automation |
BL-RETRO |
Good |
sold |
Photo /
More Info. |
: Controlled Automation
Model: BL-RETRO
Beam Line
Electrically and hydraulically controlled.
Includes Whitney 3-press beamline, 18″ web
throat.
Length is 36″ through beamline.
Extra dies also included.
Includes beamline length measuring probe, 50
feet material.
Includes rebuilt Whitney beamline hydraulic
power unit.
Unit has 15hp motor.
|
|
Ad # 11508 | Radial Drill Press |
1990s |
Botce Crane |
1249 |
Good |
sold |
Photo /
More Info. |
11" Column 36" Throat: Botce Crane
11" Column
36" Throat
30" x 53" Base
42-1750 RPM |
|
Ad # 14201 | Radial Drill Press |
|
Fosdick |
4ft |
Good |
sold |
Photo /
More Info. |
12" Column 4ft Arm: Fosdick
12" Column
4 Ft Arm
10 Quill Travel
20-1406 Spindle RPM
20" x 30" Table
Power Clamping
|
|
Ad # 11385 | Single Spindle Drill Press |
50s |
Cincinnati |
24 |
Good |
sold |
Photo /
More Info. |
11" Throat 24" Stroke: Cincinnati Drill Press
Power Downfeed
11" Throat
21" T slotted Round Base
90-1200RPM
|
|
Ad # 11378 | Radial Drill Press |
1941 |
Carlton |
|
Very Good |
sold |
Photo /
More Info. |
4 ft 11" Column : USED 4' X 11´´ CARLTON RADIAL ARM DRILL
WORKING SURFACE BASE: 44´´ X 36´´
SPINDLE STROKE:12´´
SPINDLE SPEEDS:(12) 120 TO 3000 RPM
FEEDS:(6) .006 TO .025 IPR
SPINDLE TAPER:#4 MT
POWER CLAMPING COLUMN ONLY:YES
MANUAL HEAD TRAVERSE:YES
DOUBLE END BASE:YES
POWER ELEVATION:YES
MOTOR, HORSEPOWER:5
Foot Print 37" x 85"
|
|
Ad # 11226 | Radial Drill Press |
1950s |
Caser |
8 x 36 |
Good |
sold |
Photo /
More Info. |
8" Column x 36" arm: 8" dia column x 36" arm
5hp?
30" Throat.
24" x 18" Box table. 36" Travel.
Tap and Feed controls.
Speed 102 - 1150 Rpm |
|
Ad # 11225 | Multi Spindle Drill Press |
1950s |
Allen |
|
Fair |
sold |
Photo /
More Info. |
25" x 44" Table : 15Hp?
25" x 44" Table Size.
12" Throat.
adj crank table lift..
12" Spacing between Spindles. T Slot Bed. |
|
Ad # 11224 | Multi Spindle Drill Press |
1950s |
Allen |
|
Fair |
sold |
Photo /
More Info. |
Table Size 24" x 54": 10 Hp?
15" Throat.
24" Stroke. 25" Spacing between Spindles. T Slot
Bed. 24" x 54" |
|
Ad # 13267 | Radial Drill Press |
|
Carlton |
3ft |
Good |
sold |
Photo /
More Info. |
9" Column 3 ft Arm: Carlton radial arm drill
3ft arm
9" Column dia
Rpm 80 -1500
|
|
Ad # 12078 | Radial Drill Press |
1952 |
CASER |
FR6-40 |
Excellent |
sold |
Photo /
More Info. |
12" Column 48" Throat: CASER Radial Arm Drill
12" Column
12" Boring Depth
48" Throat
14-2000 RPM
Feed 0.002-0.012
Base 80" x 40"
Stand 20" x 30" x 20" |
|
Ad # 12077 | Radial Drill Press |
1960s |
SpeedMaster |
14 |
Excellent |
sold |
Photo /
More Info. |
14" x 60" Throat: SpeedMaster
14" Column
10-2400 RPM
Feeds 0.002-0.012
12inch Boring Depth
24" Of Column Travel Vertical
72" x 42" Base
Table 24" x 30" x 24" |
|
Ad # 12055 | Radial Drill Press |
1970s |
Kankanna Machine Corp |
140U |
Good |
sold |
Photo /
More Info. |
22" Dia Column: 3" drill cap: Kankanna Machine Corp
Type 140U
Drilling and Taping
6MT spindle
4" spidle dia
driling area 84 x 144"
drill capacity 3"
spindle travel: 18"
column dia : 22"
220/440 volts-has transformer using 220/3
18" Column
Swivel 360 Degrees
Tilte 180 Degrees
24" Quill
6ft Max Thorat
10 Ft movement at base
Power feed on column |
|
Ad # 12011 | Single Spindle Drill Press |
|
Cleereman |
Series A |
Excellent |
sold |
Photo /
More Info. |
15 inch Throat x 18 inch depth: Cleereman Drilling and taping machine
15 inch Throat 18inch Drilling Depth
Voltage 440
Max RPM 2000
No 5 Morse taper
10+ Hp
42" Between the Spindle and table Max |
|
Ad # 13154 | Radial Drill Press |
|
Chipmaster |
|
|
sold |
Photo /
More Info. |
4ft Arm 13" Column: Chipmaster-radial drill
Machine Specifications: please verify specs
below
* Arm length 4'
* Column diameter 13"
* Drills in plane of base to center of circle
96"
* Center of column to face of column 9-1/8"
* Spindle radius (min/max) 20" / 57"
* Distance spindle to base (min/max) 14" / 54"
* Spindle to column face 13"
* Spindle travel 14"
* Vertical arm travel 26"
* Morse taper in spindle #5
* Spindle nose diameter and length 3-15/16" x
7-1/8"
* Main drive motor 7 hp
* Spindle speeds (12) 40 to 1200 rpm
* Power feeds (9).006 to .125 ipr
* Approximate floor space 122" x 86"
* Approximate height 117"
* Approximate weight 11,700 lbs
F.O.B. Statesville, N.C.
|
|
We found 19 matching ads. Now displaying the remaining 19 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12767 | Vertical Band Saws |
|
Delta |
28303 |
Good |
sold |
Photo /
More Info. |
14": Delta Bandsaw Model 28303
14" throat
Blade Speed 40-60-81-115-3000 FPM
|
|
Ad # 11672 | Fully Automatic Horizontal Band Saw |
|
Do-All |
C 305 |
Excellent |
sold |
Photo /
More Info. |
12" x 12": Do-All Model C 305
12" x 12"
Blade Speed (Variable): 60 - 350 FPM
Blade Size: 1-1/4" x 144"
Bar Feed:
Min -Index Length: 1/4"
Single Index Length: 16"
Multiple Index Length: 128"
Blade Wheel Diameter (2): 15"
Hydraulic Tank Capacity: 10 Gallons
Coolant Tank Capacity: 20 Gallons
Dimensions (W x D x H): 100 " x 75" x 52"
|
|
Ad # 12776 | Vertical Band Saws |
|
Rockwell |
28-200 |
Good |
sold |
Photo /
More Info. |
: Rockwell
Model 28-200
13" Throat
Voltage 110/1 Phase |
|
Ad # 14305 | Cold Saws & Power Hack Saws |
|
Kaltenbach |
48 |
Good |
sold |
Photo /
More Info. |
20" Max cut-ferrous mtl: Kaltenbach 48 inch Automatic cold metal saw
48" Dia Wheel
20"Max Cut'
220/3 Phase
2 Additional blades
25 HP
26 - 98 SFM Blade Speed.
ferrous cutting machine
Infeed and out feed rollers are not
included. |
|
Ad # 14299 | Fully Automatic Horizontal Band Saw |
1993 |
Hyd Mech |
H 16 |
Good |
sold |
Photo /
More Info. |
16" Rounds 16" x 16": Hyd Mech Model H 16
Voltage 220/3
PLC 100 Control
Year 1993
16" Rounds
16" x 16" Bundling
Blade Length 18 ft 10"
Width 1 1/2"
Blade Speed 75 - 400 FPM
Blade Drive 10 Hp
Weight 8500
Shuttle Store 0- 40" milti-indexing
Work load 10,000 lbs max.
Note:Auto Feed Needs minor Work. Saw Cuts
in
Manuel Mode fine..think its an easy fix to
run
auto feed
|
|
Ad # 12665 | Horizontal Band Saws |
? |
Wellsaw |
613 |
Good |
sold |
Photo /
More Info. |
6" x 13": Wellsaw Model 613
voltage: 220 single phase
650 lbs.
7 x 13 capacity-Cuts rounds to 7" or 6.5 at 45 degrees
Four speed
50-90-160-250 FPM
eV belt drive
1 HP motor
3/4 blade
8 gallon wet cutting system is standard
|
|
Ad # 12545 | Fully Automatic Horizontal Band Saw |
2010 |
HEM |
H90A-1 |
Excellent |
sold |
Photo /
More Info. |
12"x 16": Hem Saw
H90A-1
3 HP
1" Blade
12" x16" rectangle
12" Round
hyd. clamp feed |
|
Ad # 14152 | Fully Automatic Horizontal Band Saw |
1999 |
Danobat |
CR 330 A |
Good |
sold |
Photo /
More Info. |
12" x 13": Danobat CR 330 A
12" x 13"
12" Rounds
Fully Automatic
Hydraulic Clamping Shuttle
Twin Column
Will not run in automatic mode |
|
Ad # 11360 | Cold Saws & Power Hack Saws |
|
Haberle |
90 |
Fair |
sold |
Photo /
More Info. |
12" Blade: Haberle Cold Saw
12" Blade Diameter
440/3 phase |
|
Ad # 11359 | Cold Saws & Power Hack Saws |
? |
MEP |
300 |
Good |
sold |
Photo /
More Info. |
12" Blade : Air Powered Feed
220/ 3 Phase
12" Blade Diameter
Still in production |
|
Ad # 12406 | Horizontal Band Saws |
2000s |
Ellis |
1100 |
Good |
sold |
Photo /
More Info. |
8" x 10" Round 8": Ellis Model 1100 Bandsaw
8" x 10"
8" Round
Miter 45 degrees
70-135 FPM |
|
Ad # 11333 | Fully Automatic Horizontal Band Saw |
Late 90s |
Victor |
Auto 10H |
Good |
sold |
Photo /
More Info. |
Victor Auto 10, 2 Hp 10" x 16" capacity: Victor Auto 10H
10" x 16" Rectangle
10" round
2 Hp
220/440
Auto Feed
Auto Return
|
|
Ad # 11314 | Horizontal Band Saws |
1990s? |
HYD Mech |
S-20 |
Very Good |
sold |
Photo /
More Info. |
Mittering Bandsaw 2 hp 13" x 18" rectangle 13" round : HYD Mech-S-20 auto feed saw
60 Degree Mitering
2 hp
Blade speeds 90 ft/min to 370 ft/min
13" Round Capacity
13" x 18" capacity at 90 degrees
Quick locking vise
Coolant system |
|
Ad # 14019 | Fully Automatic Horizontal Band Saw |
|
Hem Saw |
H90A |
Good |
sold |
Photo /
More Info. |
12.75 x 12.75: 12.75" X 12.75" Capacity
1" X 12'10" X .035" Blade
3 Hp Motor
Bi-Function Control
Console On Top Of Saw
0-24" Feed Stroke "Single Index"
Feed Table W/ Mechanical Digital Readout
Blade Break Switch
Out Of Stock Switch
Adjustable Blade Speed (60-300 Sfm) |
|
Ad # 14022 | Fully Automatic Horizontal Band Saw |
|
Hyd-Mech |
H 12 |
Good |
sold |
Photo /
More Info. |
S/N A0395289H: Hyd-Mech H 12
12" CAPACITY ROUND
12" X 12" CAPACITY SQUARE
1 1/4, 13'6" BLADE
16" BLADE WHEEL DIAMETER
31" TABLE
6000 LB MAX WORKLOAD
EQUIPMENT & FEATURES
PLC 100 PROGRAMMABLE CONTROL WITH LENGTH CONTROL
PROGRAM UP TO 9 DIFFERENT JOBS, PIECE LENGTH,
COUNT, AND RUN ANY ORDER
HYD. VICE CONTROL 2 HP
MULTI INDEX STANDARD
POWER BLADE BRUSH
2 RACKS
ROLL OUT TABLE
MOTOR & CONTROLS
5 HP MAIN MOTOR 22O/480 3 60 CYCLE
2 HP VICE MOTOR
PLC |
|
Ad # 11223 | Fully Automatic Horizontal Band Saw |
? |
W.F. Wells & Sons |
3 |
Needs Work |
sold |
Photo /
More Info. |
16" round and 16" x 20" rectangle: Fully Auto Feed.
16" Round Capacity. 16" X 20" Rectangle Capacity.
Coolant |
|
Ad # 12218 | Vertical Band Saws |
|
North State |
WBS-20L |
Good |
sold |
Photo /
More Info. |
20" Throat : North State Bandsaw WBS-20L
220 Single Phase Voltage
3 Speed
20" Throat |
|
Ad # 12076 | Horizontal Band Saws |
1990s |
Carolina industrial Equip |
HV20 |
Excellent |
sold |
Photo /
More Info. |
10" rounds or 12" x 20": Carolina Industrial Equipment
HV20 Bandsaw
12" x 20"
110 Single Phase |
|
Ad # 11997 | Horizontal Band Saws |
90s |
Startrite |
H225W |
Good |
sold |
Photo /
More Info. |
16" x 10": Startrite H225W
16" x 10" capacity
voltage 220/3 phase |
|
We found 24 matching ads. Now displaying the remaining 24 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11782 | Jig Grinders |
1960s |
Moore Tools |
No 2 |
Excellent |
sold |
Photo /
More Info. |
24" x 12": Moore No 2
Voltage: 220/ 3 Phase
60,000 RPM
Travels 18" Z 12" Y 10" Z
Digital readout
|
|
Ad # 11767 | 3 Axis Fully Automatic Surface Grinder |
1980 |
Kanui |
HFS204 |
Good |
Sold |
Photo /
More Info. |
Kanui 8" x 18" : Kanui Type HFS204
3 Axis Fully Automatic Surface Grinder
Serial: 12071
Year: 1980
Travels 12" x 24" x 18"
8" x 18" Magnetic Chuck
Machine dials in metric no standard units. |
|
Ad # 12907 | Cylindrical Grinders (O.D. & I.D.) |
1996 |
Tripet |
TST-250 |
Good |
sold |
Photo /
More Info. |
28" OD: Tripet TST 250
Updated Usach Control Yr 2008
28" Swing Max
12,000 Rpm Machine Spindle Speed
ID / OD Spindles
Diamond Dresser
Travels
14" x 24"
Coolent Pump |
|
Ad # 13655 | 3 Axis Fully Automatic Surface Grinder |
1970's |
Thompson |
DF C2 |
Good |
sold |
Photo /
More Info. |
24" x 96"-fully automatic: Thompson Surface Grinder
3-Axis downfeed
Panasonic PLC Control
24" x 96" electro magnetic-powered
chuck-
Neutrofier ll std pole spacing
Main spindle motor : 35HP
Volt: 220-440/3 phase
Diamond Wheel Dresser
20" wheel x 3" wide
20" height under grinding wheel
max
Note:Auto downfeed /inc downfeed
needs
some
minor repair, but will move manually
0.0005
downfeed increment
Refurbished 1996-electrically &
Mechanically,
ways were scraped in then,ways look
very
good!
will hold 0.001 across chuck or
better
rigging/loading:$2500.00 |
|
Ad # 11690 | Centerless Grinders |
|
Van Norman |
GE |
Good |
sold |
Photo /
More Info. |
12" x 4": Van Norman Centerless Grinder
12" x 4"
Model GE
7.5 HP
Auto Cycle
no crusher
|
|
Ad # 11642 | Vertical Spindle - Blanchard Type |
? |
Blanchard |
number 18 |
Very Good |
sold |
Photo /
More Info. |
36" Blanchard : Blanchard number 18
36" Chuck With 1/2" Life left
12" Vertical Travel
30hp?
Coolant
|
|
Ad # 11644 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati Milacron |
? |
Very Good |
sold |
Photo /
More Info. |
14" x 36" OD grinder: Cincinnati Milacron Universal Hydraulic
OD/ID
14" x 36"
14" Grinding wheel Max OD
10" Magnetic Chuck face chuck
4 Jaw 10" Chuck (not Shown) |
|
Ad # 11457 | 3 Axis Fully Automatic Surface Grinder |
2008 |
Chevalier |
1640ADII |
Excellent |
sold |
Photo /
More Info. |
40" x 16" chuck: Chevalier FSG 1640ADII
TABLE SIZE.......................... 15- 3/4" X 39- 3/8"
MAX. GRINDING CAPACITY .................. 16" X 40"
MAX. LONGITUDINAL TABLE TRAVEL, HYDRAULIC .... 41- 5/16"
MAX. LONGITUDINAL TABLE TRAVEL, MANUAL ........ 43 -1/4"
MAX. CROSSFEED TRAVEL, AUTOMATIC ................... 16"
MAX. CROSSFEED TRAVEL, MANUAL ...................... 18"
DIST. FROM SPINDLE CENTER TO TABLE ............ 24-7/16"
VARIABLE TABLE SPEED, HYDRAULIC ......... 16' TO 82' FPM
AUTOMATIC CROSSFEED INCREMENT ........... 1/8" TO 1-1/4"
RAPID CROSSFEED SPEED ...................... 12" IPM
CROSSFEED HANDWHEEL, PER GRADUATION ............ 0.0025"
PER REVOLUTION ................................... 0.25"
MICROFEED, PER REVOLUTION .................0.0005"
PER GRADUATION ................................ 0.00005"
AUTOMATIC INCREMENTAL DOWNFEED ....... 0.00005" TO .002"
RAPID TRAVERSE RATE ....................... 25" IPM
SPINDLE MOTOR ..................................... 5 HP
STANDARD GRINDING WHEEL ............ 14"DIA. X 2"W X 5"B
APPROX. WEIGHT ............................... 7,710 LBS
APPROX. DIMENSIONS ................... 120" X 76" X 88"H
EQUIPPED WITH:
15.7" X 39.4" ELECTRO-MAGNETIC CHUCK
COOLANT SYSTEM WITH PAPER FILTRATION-auto feed,single filter
no magnetic seperator
manual balancer
manuals
tools
3/60/208-230-460 VOLT ELECTRICS
Very low hours 8-20 hrs on it |
|
Ad # 11404 | Surface Grinders |
80s? |
Hangshow machine Tool |
M7130 |
Very Good |
sold |
Photo /
More Info. |
300mm x 1000mm: Travels: 40"x,12"y,20"z
12" dia wheel
4.5KW spindle motor
coolant system
0.0005 in graduation
13" under wheel
manual downfeed
|
|
Ad # 12433 | Surface Grinders |
|
Brown and Sharp |
824 |
Good |
sold |
Photo /
More Info. |
8" x 24": Brown and Sharp
8" x 24"
Power X and Y
6" x 18" Magnetic Chuck
9" Wheel |
|
Ad # 14138 | Centerless Grinders |
|
Cincinnati |
2OM2H1U |
Good |
sold |
Photo /
More Info. |
3" Dia Capacity: Cincinnati # 02M centerless grinders
SPECIFICATIONS:
Capacity with standard workrest: 1/16” – 3 1/2”
with heavy duty low boy workrest: 2” – 4”
Grinding wheel dimensions: 20” diam x 12” hole x up to 8” wide
Regulating wheel dimensions: 12” diam x 5” hole x up to 8” wide Regulating wheel speeds: 12 to 300 RPM (12 speeds) Grinding wheel motor: 15HP
Regulating wheel motor: 1 1/2 HP
set up currently as an infeed grinder
completly rebuilt intermotion in Nebraska in 2003
will hold +-0.0001 tenths
Currently set up for cam off, but can be reconfigured for through feed. Comes with vertical parts loaders as shown in the pictures. Will also include miscellaneous tooling and grinding wheels.
Excellent equipment used to grind stainless steel pins to a tolerance of .0001". Reason for sale is we have purchased multi-function CNC lathes and no longer need to grind.
Voltage 220/440
Floor space 11'x11'
Manuals (after re-build, not originals)
Re-built in 2000 by Inter-motion of Kearney NE.
Two Machines avialable |
|
Ad # 12385 | Tool & Cutter Grinders |
|
Oliver of Adrian |
ACF 1199 |
Good |
sold |
Photo /
More Info. |
Cut off tools or Recess tools: Oliver of Adrian
Cutt off tool grinder and recess tool grinder
Model ACF-1199
Voltage 440
8" Stroke
12" Depth
16" x 16" Table |
|
Ad # 11347 | Surface Grinders |
1979 |
Harig |
Super 618 |
Good |
sold |
Photo /
More Info. |
Harig 6" x 18" 1 hp Magnetic Chuck: Harig Super 618
220/440 volts
Table speed 3 fpm -70 fpm
Longitudinal Travel 20"
Cross Feed Travel 6" 3/4
Vertical working height 11" under 7" wheel
Grinding wheel 7" x 1/2 x 1-1/4" I.D.
Spindle Hp 1
Spindle Speed 3450
|
|
Ad # 12236 | Surface Grinders |
|
JakoBsen |
25 |
Good |
Sold |
Photo /
More Info. |
6" x 18" : JakoBsen Surface Grinder
6" x 18"
Magnetic Chuck
Power Feed X and Y
|
|
Ad # 12233 | Cylindrical Grinders (O.D. & I.D.) |
1987 |
Parker Majestic |
No 1 |
Good |
sold |
Photo /
More Info. |
12" x 20" CNC: Parker Majestic Number 1 CNC
ID/OD grinder
12" Swing x 20"
Allen-Bradley 9 Series Control
includes manuals
2 Available |
|
Ad # 12232 | 3 Axis Fully Automatic Surface Grinder |
1984 ? |
Brown & Sharp |
6 x 18 |
Good |
sold |
Photo /
More Info. |
6" x 18": Brown & Sharpe
3 axis w/ auto downfeed
6" x 18"
hyd table feed
Electro mag Power Magnetic Chuck
220/3 Phase
2 HP motor
coolant tank
stepper motor type downfeed
very low hrs -less than 200hrs |
|
Ad # 13313 | Jig Grinders |
|
Moore |
No 1 1/2 |
Good |
sold |
Photo /
More Info. |
Jig Bore: Moore No 1 1/2 Jig Bore
9" x 14" Travels
Voltage 230/3 Phase
10" x 19" Table
Comes with boring tool and scope |
|
Ad # 12215 | Pedestal & Bench Grinders |
|
Cincinnati |
108 |
Good |
sold |
Photo /
More Info. |
10" Wheel 7/8" diameter shaft: Cincinnati Model 108
Voltage 440
10" Wheel Max on 7/8" Shaft
|
|
Ad # 12217 | Belt & Disc Grinders |
|
Kalamazoo |
12" Sander |
Good |
sold |
Photo /
More Info. |
12" Diameter Sander: Kalamazoo
12" Disk Sander
1 HP |
|
Ad # 13306 | Surface Grinders |
|
KO lee |
1000 |
Good |
sold |
Photo /
More Info. |
6" x 12": Kolee 1000
Surface Grinder
6" x 18"
Wired 220
Magnetic Chuck
|
|
Ad # 13305 | Surface Grinders |
|
Mattison |
1248 |
Fair |
sold |
Photo /
More Info. |
12" x 48": Mattison Surface Grinder
Power x and y
12" x 48" Power Magnetic Chuck
20" x 3" wide Wheel Max
15hp
Motor needs rewinding or replacement
Spindle bearings are good motor just burnt out. |
|
Ad # 12037 | Surface Grinders |
1980s |
AMW |
YSG 618 |
Excellent |
sold |
Photo /
More Info. |
6" x 18": AMW Surface Grinder
6" x 18" Travels
Magnetic Chuck 6" x 18"
RPM 3440
Voltage 440
Coolent |
|
Ad # 12038 | Surface Grinders |
1985s |
Mitsui Hight-tec |
200MH |
Good |
sold |
Photo /
More Info. |
6" x 12": Mitsui High-tec
6" x 12" Surface Grinder
6 x 12 fine pole perm mag Magnetic Chuck
wired voltage 440
Yrs 1985
|
|
Ad # 12026 | Surface Grinders |
90s |
Jet |
612 |
Good |
sold |
Photo /
More Info. |
6" x 12": Jet manual Surface Grinder
6" x 12" travels
no chuck included
Voltage 440/ 3 phase
Feed 0.0002 |
|
We found 8 matching ads. Now displaying the remaining 8 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15369 | Keyseaters |
|
Davis |
No 4 |
Good |
sold |
Photo /
More Info. |
Davis No 4 (Video of it running): Davis No 4 Keyseater
Lots of Tooling
220 Volt
Key Capacity 1/16 to 3/4
Throat depth 15 1/4"
Max height 8"
Max length of cut 7"
Stroke 4 1/2
Strokes per minture 48
|
|
Ad # 11643 | Metal Shapers, Horizontal |
? |
cincinnati |
24" |
Good |
sold |
Photo /
More Info. |
24": Cincinnati 24
24" stroke
In great condition does not come with vise. |
|
Ad # 11401 | Keyseaters |
|
Davis |
5? |
Fair |
sold |
Photo /
More Info. |
Davis no 5: Keyway width, Minimum 1/16"
Keyway width, Maximum 1.5"
Cut length w/16" cutter, Max 3"
Cut length w/20" cutter, Max 7"
Cut length w/24" cutter, Max 11"
Cut length w/30" cutter, Max 17"
Cut length w/34" cutter, Max 21"
Stroke length, Max 4.5"
Throat distance, cutter to post 18.75"
Height of work, Max 14"
Table dimensions (overall) W x L 30.25"
x 31"
Table longitudinal travel 1.375"
Included taper per fot, Max 3"
Strokes per minute 33.5 spm
Motor, Horsepower/RPM 2HP
Note: needs a little work...
no tooling included |
|
Ad # 11375 | Keyseaters |
1974? |
Davis |
5 |
Very Good |
Sold |
Photo /
More Info. |
Keyway width, Maximum 1.5: Keyway width, Minimum 1/16"
Keyway width, Maximum 1.5"
Cut length w/16" cutter, Max 3"
Cut length w/20" cutter, Max 7"
Cut length w/24" cutter, Max 11"
Cut length w/30" cutter, Max 17"
Cut length w/34" cutter, Max 21"
Stroke length, Max 4.5"
Throat distance, cutter to post 18.75"
Height of work, Max 14"
Table dimensions (overall) W x L 30.25" x 31"
Table longitudinal travel 1.375"
Included taper per fot, Max 3"
Strokes per minute 33.5 spm
Motor, Horsepower/RPM 2HP
no tooling included |
|
Ad # 11381 | Metal Shapers, Horizontal |
|
Cincinati |
24 std |
Good |
sold |
Photo /
More Info. |
24" stroke Cinicinnati: 24" stroke
tilt table
Swivel & tilt vise
Tilt base
10-129 strokes/ min
feed: 0.010-0.170
12" wide vise jaws x 16" jaw opening
|
|
Ad # 12216 | Broaching Machines, Vertical & Horizontal |
|
BridgePort |
|
|
sold |
Photo /
More Info. |
Bridgeport Sloting Head-shaper: Bridgeport Sloting Head only (not mill)
220/ 3 Phase
60-420 RPM |
|
Ad # 12053 | Broaching Machines, Vertical & Horizontal |
1960s |
Lapointe Machine Tool co |
2L |
Good |
sold |
Photo /
More Info. |
10 Ton 48" stroke: Lapointe Machine Tool
Horizontal Broaching machine
Model 2L
10 Tons
48" Stroke
5" diameter threw hole
Voltage 220/ 3 Phase
1000 PSi Operating pressure |
|
Ad # 12040 | Broaching Machines, Vertical & Horizontal |
|
Bridgeport |
Shaper |
Good |
sold |
Photo /
More Info. |
Bridgeport Shaper: Bridgeport Shaper
70-420 Strokes a minute |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11768 | Tap & Metal Disintegrators |
? |
Canmann |
? |
Good |
sold |
Photo /
More Info. |
Canmann 15KVA 18" x 24" Table: Canmann Metal Disintegrator
15KVA
Voltage: 220 SINGLE PHASE
Fregunecy 50-60
18" x 24" table
36" Throat |
|
Ad # 11492 | Wire EDM Machines |
1996 |
Mitsubishi |
SX-10 |
Excellent |
sold |
Photo /
More Info. |
travels:13-3/4" x 9-1/2" x 8-1/2": Mitsubishi SX-10 Wire EDM
Model 1996
auto threading
Machining Travels (XYZ): 13.77" x 9.84" x 8.66"
Submerged cutting
auto wire threading
Chiller
programmable angle cut feature: offet 1-1/4" approx 30deg included
Controller Model W11SX
13.5 KW
approx: 13 in/hr cut speed
machining hrs: 1421 hrs as of 6-25-13 |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12658 | Horizontal and Vertical Hones |
|
Sunnen |
MBB 1660 |
Good |
sold |
Photo /
More Info. |
: I.D. RANGE:
0.600" (1.5mm) up to 6.5" (165mm)
LENGTH RANGE:
BORES UP TO 16" (400MM), DEPENDING ON BORE
DIAMETER
SPINDLE SPEEDS:
200, 250, 320, 400, 500, 640, 800, 1000, 1270,
1600, 2000, 2500 RPM
SPINDLE MOTOR: 1/2 HP
SPINDLE BRAKE: STANDARD
HONING OIL PUMP: UTILIZES SPINDLE DRIVE MOTOR
HONING OIL CAPACITY: 16 GAL.
ELECTRICAL SYSTEM:
115/230V, 1-PHASE, 60-CYCLE
FLOOR SPACE: 30" WIDE x 30" DEEP x 63" HIGH
WEIGHT (WITH HONING OIL): 630 LBS (287 KG)
MACHINE
ONLY
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14298 | Miscellaneous / Other |
|
Carlstadt |
N-58 |
Good |
Sold |
Photo /
More Info. |
1/2" Square: Picket Twister Machine: Carlstadt bar twisting machine
1/2" sq solid rod w/ optional 5/8" acc
3/4HP
base 12" x 18"
some bushings included
Men E Uses no 2
Picket Twister-twists square bars quickly and
easily for railings, grills ect.-bars remain
straight after twisting
drum switch permits accurate control for bar end
alignments
manuals |
|
We found 19 matching ads. Now displaying the remaining 19 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11775 | Power Squaring Shear (Hydraulic) |
mid 90s |
Pacific |
? |
Excellent |
sold |
Photo /
More Info. |
12 ft 1/2" open ended: Pacific Hydraulic open ended
12ft x 1/2 inch Shear capacity
Year: mid 90s
4 Ft Squaring arm (not shown)
36" back Gauge
Open ended Shear Throat apox 24" to blade. |
|
Ad # 13717 | Power Squaring Shear (Hydraulic) |
|
American Hydralic |
1/4" x 10Ft |
Good |
sold |
Photo /
More Info. |
10ft 1/4": American Hercules hydraulic plate shear.
1/4" x 10' capacity.
Hydraulic back gauge.
220 or 440 3 phase
5ft Squaring Arm
|
|
Ad # 12977 | Power Squaring Shear (Mechanical) |
1987 |
Amada |
4045 |
Good |
sold |
Photo /
More Info. |
1/8th or 4.5mm x 13ft or 4 meters: Amada 4045 Shear
13ft cut length or 4 Meter Cut length x 1/8"
Digital 42" Back gauge
(4.5mm) Max material
rigging/loading fee : $1000 |
|
Ad # 11675 | Power Squaring Shear (Mechanical) |
? |
Wysong & Miles |
1096 |
Very Good |
sold |
Photo /
More Info. |
10ga (1/8") x 8ft: Wysong & Miles co.
10 Ga (1/8") x 96"
No Back guage
heavy duty castings nice machine.
|
|
Ad # 11446 | Power Squaring Shear (Mechanical) |
1982 |
Amada |
M2545 |
Very Good |
sold |
Photo /
More Info. |
8ft x 3/16" : Amada M2545
Max Thick 3/16"
Max Cut Length 98"
Strokes Per Minute 60
7 1/2 Hp
Electronic Foot Control
90" Squaring arm
39" Front Operated Programmalbe back gauge
Pneumatic Sheet Lifters
One Shot Lubrication
Inch/Metric ReadOut
Hydraulic Holddowns
Light Beam Gauging
|
|
Ad # 11445 | Power Squaring Shear (Hydraulic) |
2004 |
VRLI |
VH6-10 |
Needs Work |
sold |
Photo /
More Info. |
6ft x 10ga or 1/8": VRLI Hydraulic Shear
28" power backstop
6ft x 10ga or 1/8"
|
|
Ad # 11407 | Foot Stomp & Air Operated Shear |
|
NIAGARA |
|
Good |
sold |
Photo /
More Info. |
10ft x 16ga : NIAGARA
10ft x 16ga shear
pneumatic |
|
Ad # 11372 | Power Squaring Shear (Mechanical) |
1969 |
Cincinnati |
1812 |
Excellent |
sold |
Photo /
More Info. |
12 ft x 1/4" Mechanical Squaring Shear: Cincinnati Model 18
12ft x 1/4"
Power Back stop 36"
220/3 Phase
Spare Set of Blades, new blades in it now
128" Sqauring arm
designed for a pit 6" deep x 6" wide x 12ft long pit, but supported on 6" I beams now-no pit needed if set on i beams--comes with it..
rigging fee required: approx: $800.00 to load |
|
Ad # 14106 | Power Squaring Shear (Hydraulic) |
|
Summit |
10 x 1/4 |
Good |
sold |
Photo /
More Info. |
10ft x 1/4": Summit Shear
10Ft x 1/4"
rigging/loading fee $1500.00
|
|
Ad # 11277 | Power Squaring Shear (Hydraulic) |
1964 |
Pacific |
250-HD |
Good |
sold |
No Photo /
More Info. |
Pacific 250-HD 3/8" by 12ft 32Ton: Model 250-HD
3/8" by 12ft
32Ton? |
|
Ad # 14013 | Power Squaring Shear (Hydraulic) |
|
Accurshear |
81356 |
Good |
Sold |
Photo /
More Info. |
6 Ft x 10 Ga(1/8"): Accushear # 81356 hyd. shear
capacity: 6ft x 10ga steel
Metal shop has a 6 foot used accurshear model
81356
good condition and well maintained will shear 10ga
steel - 14 ga SS - 1/4 Alum
Manuel Back gauge |
|
Ad # 13997 | Power Squaring Shear (Hydraulic) |
|
Atlantic |
hds1ox 1/2 |
Good |
sold |
Photo /
More Info. |
1/2 x 10ft: Atlantic 1/2" x 10 ft metal shear.
Wired now for 230
auto back gauge 0- 39 inches. |
|
Ad # 13999 | Power Squaring Shear (Mechanical) |
|
Niagara |
1014 |
Good |
sold |
Photo /
More Info. |
10ft x 14ga: Niagara 10' x 14Ga |
|
Ad # 14001 | Foot Stomp & Air Operated Shear |
|
Denver |
8' x 18ga |
|
sold |
Photo /
More Info. |
8' x 18GA: Denver
8 Foot x 18 GA Shear
Has extra Blade |
|
Ad # 12079 | Power Squaring Shear (Mechanical) |
1960s |
Niagra |
3614 |
Excellent |
sold |
Photo /
More Info. |
36" x 14ga: Niagara
36" x 14ga
18" Back Gauge
220/3 Phase |
|
Ad # 11996 | Power Squaring Shear (Mechanical) |
75 |
Edwards |
740 truecut |
Excellent |
sold |
Photo /
More Info. |
8ft x 2.5mm /16ga: Edwards Truecut
2.5mm (16ga) x 8ft
220/ 3 phase
650mm back guage (24in) |
|
Ad # 11949 | Power Squaring Shear (Hydraulic) |
1980s |
Select Machine Tool |
100 inch x 1/4" |
Good |
sold |
Photo /
More Info. |
8ft x 1/4": Select Machine Tool
8ft x 1/4"
Hydraulic Shear |
|
Ad # 11897 | Power Squaring Shear (Hydraulic) |
1986 |
LVD |
16-OH-37 |
Needs Work |
sold |
Photo /
More Info. |
16ft x 3/8": LVD Shear 16-OH-37
16ft x 3/8" capacity
Type 16-OH-37
Year 1986
Voltage 480/3 wired
Control MNC 8000
48" Backguage
Front material Feed
Material Conveyor at rear
Note:needs minor electrical work on control
have books,schematics and tapes/cds on it
loading fee: extra |
|
Ad # 13740 | Power Squaring Shear (Hydraulic) |
1983 |
PullMax |
GSA 430 |
Good |
sold |
Photo /
More Info. |
1/2" x 10ft: PullMax GSA 430
capacity(max):1/2" x 10ft
3ft Squaring Arm
36" back gauage/swing away
blades sharp-ready to go
30HP motor
used to cut 12ga, & 1/4" steel mainly
manuals
rigging/loading:$1500.00
|
|
We found 14 matching ads. Now displaying the remaining 14 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11615 | Straight Apron Brakes |
|
Chicago |
S-1014 |
|
sold |
Photo /
More Info. |
10ft x 14Ga: Chicago 10ft
14GA capacity |
|
Ad # 11568 | Press Brakes (Hydraulic) |
80s? |
Hydra Tool |
100-10H |
Very Good |
sold |
Photo /
More Info. |
100 Ton 10 ft brake: HTC
Model 100-10H
100 Ton
10ft Throat 9" Distance between sides 8"
Hurco Backstop (needs service) |
|
Ad # 12533 | Press Brakes (Mechanical) |
|
Cincinnati |
13 |
Needs Work |
sold |
Photo /
More Info. |
13' x 3/8": 260 tons: Cincinnati 13
Voltage 440
Bending capacities mild steel 13' x 3/8"
8' x 1/2"
4' x 5/8"
Tonnage capcity at midstroke 260 tons
Tonnage capacity near bottom 400 tons
Overall Length of Bed * Ram 14'
Distance between Housings 10'6"
Stroke 4"
Ram Adjustment 6"
Shut Height SDAU 12"
Throat Depth 20"
Bed width 7.5"
Floor to top of bed 32"
SPM Approximate 30
Weight, Approximate 48,000 lbs
Overall Dimensions, Approximate, without bed 208"
LR x 113" FB x 128" H
|
|
Ad # 11449 | Press Brakes (Mechanical) |
1970s |
Niagara |
N-150-10-12 |
Excellent |
sold |
Photo /
More Info. |
225 Ton 12 ft x 1/4" : Niagara
225 Ton Mechincal press Brake
13ft x 1/4"
SPECIFICATIONS SUBJECT TO VERIFICATION:
CAPACITY 150 TON
BED OVERALL 15' WITH HORN
DISTANCE BETWEEN HOUSINGS 10'5"
HORN 3'6" LONG
STROKE 3"
DOUBLE BULL GEARED
MOTORIZED ADJUSTMENT
|
|
Ad # 11405 | Press Brakes (Hydraulic) |
|
Roto-Die |
#10 |
Good |
sold |
Photo /
More Info. |
16ga 10f1: 16 ga. x 10' Max
Includes 1 dies
Forming die 270 deg. |
|
Ad # 11406 | Press Brakes (Mechanical) |
|
Eagle Speedi |
Speedi Bender |
Good |
sold |
Photo /
More Info. |
10ft x 16ga: Engle speedi-bender multiple lower die configuration
10ft x 16ga |
|
Ad # 14104 | Press Brakes (Hydraulic) |
1990s |
Cincinnati |
230CBIIx10 |
Good |
sold |
Photo /
More Info. |
230 Ton 10ft : Cincinnati 230 Ton Press Brake in excellent
condition
230CBIIx10
12 Foot Bed Length
16" Stroke
|
|
Ad # 14068 | Press Brakes (Hydraulic) |
2008 |
Krras |
175 Ton x 10ft |
|
sold |
Photo /
More Info. |
175 Ton x 10ft: Used Krauss press brake,
175 ton by 10 feet
with four way 7 opening die and top die,
no leaks used very little |
|
Ad # 14058 | Press Brakes (Mechanical) |
|
Verson |
9012 |
Good |
sold |
Photo /
More Info. |
90 Ton 12Ft: Verson Press Brake
90 ton x 12 ft.
10 ft + between frames.
2in bottom die with top die.
Equipment is still in use. |
|
Ad # 12303 | Press Brakes (Mechanical) |
1953 |
Chicago |
50 Ton |
Good |
sold |
Photo /
More Info. |
50 Ton 10ft Bed: Chicago mechanical press brake 50 ton
1953
light curtain
no tooling or dies
50 Ton 10 Ft
|
|
Ad # 12304 | Press Brakes (Mechanical) |
1983 |
Wysong |
90 Ton |
Good |
sold |
Photo /
More Info. |
90 Ton 8Ft : Wysong: 1983 mechanical press brake
90 ton
8 ft bed
stroke counter
5" stroke ?
has lower die holder- but no lower die
includes upper die
light curtain |
|
Ad # 14051 | Press Brakes (Hydraulic) |
|
|
|
Good |
sold |
Photo /
More Info. |
75 Ton 10Ft: 75 Ton
10Ft bed |
|
Ad # 13155 | Press Brakes (Mechanical) |
2000 |
Shearpress |
7606 |
Good |
sold |
Photo /
More Info. |
6ft 60 Ton: Shearpress
Control ETS 3000
Voltage 575 Only
60 Ton
6ft Press
Mechanically Press Works fine for single set
up/bend applications
CNC Back Guage is Broken can be fixed if you
would like to use it that way, also light curtain
side bars gone
|
|
Ad # 13109 | Press Brakes (Hydraulic) |
|
HTC |
200-12H |
Good |
sold |
Photo /
More Info. |
12ft 200 Ton 5/16" x 10ft: HTC Press Brake
200 Ton 12 Ft
10Ft between the sides.
No tooling and No back gauge.
Machine is in great condition has been refurbished. |
|
We found 5 matching ads. Now displaying the remaining 5 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12822 | Slip Rolls (Manual & Mechanicaly Operated) |
|
enco? |
? |
Good |
sold |
Photo /
More Info. |
48" x 16ga: 48" Slip Roll x 16ga
Looks to be an Enco?
Comes with roll around stand
|
|
Ad # 14330 | Roll Formers |
? |
Buffalo |
1/2 |
Good |
sold |
Photo /
More Info. |
2" x 2" x 1/4" angle iron leg out: Buffalo No 1/2 angle roll/roll former
vari-speed
capacity:leg out Angle: 2 x 1/4" ,1.5" x
1/4",leg-in: 1.5" x 0.25
flat: 6" x 1/2" on flat,2" x 3/8" on edge
channel: flange in/out: 3"@4
rounds: 1.5"
Squares: 1-1/4"
std steel pipe: 1.5",xh steel pipe: 1-
1/4",xxH:1"
12ga copper: 1-3/4",16ga coppertube:2"
square: 1-1/4" syare
Wired 440/3 volts
2" x 2" x 1/4" Angle
tonnage : 15
Adj roll travel: 2"
angle roll dia: 7"
shaft dia: 3" upper, 2.5 lower
lots of tooling included-shown
|
|
Ad # 13161 | Angle Bending Rolls |
2005 |
Comac |
Leonardo 3 |
New |
sold |
Photo /
More Info. |
1" 1/2" x 1" x 1/2" Angle Iron: 1/2"-2" pipe : Comac angle roll former -profile bender
Model Leonardo 3
Angle Roll
Voltage 220/3 Phase
Year 2005
1" 1/2" x 1" x 1/2" Angle Iron
1/2" to 2" Pipe
2" 1/2" Round tube 1/6"
1" 1/2" Square Tube x 1/8"
3/8" to 1" 3/4" Square Bar
3/8" to 1" 3/4" Round Bar
Has a set of 1" 1/4" Round Dies in addition to dies shown on machine
machine was only used as a demo machine--
|
|
Ad # 13153 | Angle Bending Rolls |
2007 |
AK Bend |
APK 101 |
Good |
sold |
Photo /
More Info. |
4" x 4" Angle: Std. Specifications-please verify below
Based On 36,000 PSI Yield
Maximum Capacity Angle Iron Leg In ...............
4" x 4" x 1/2" to a 68" Dia.
Maximum Capacity Angle Iron Leg Out .............
5" x 5" x 1/2" to a 60" Dia.
Diameter Of Dies
............................................ 12.4"
Shaft Diameters
.............................................
3.93"
Rolling Speed
.................................................
16' Per Min.
Main Motor
..................................................
.. 15 H.P.
Machine Weight
.............................................
5,000 Lbs. |
|
Ad # 13065 | Angle Bending Rolls |
2011 |
Ercolina |
CE70H3 |
New |
sold |
Photo /
More Info. |
3" sch 40 pipe or 3 x 3" x 3/8" angle iron: Ercolina CE70H angle roll former
programmable
3 roll drive
hydraulic w/memory positioning
3 axis manual twist correction for angle iron
Pipe (Max) 3" Sch.40
Angle (Max) 3" x 3" x 3-3/8"
Shaft Diameter 2-3/4" (70mm)
Center Roll Positioning Hydraulic - 16 Tons
Shaft Speed 8 RPM
Universal Tooling (Included) 9-/15" O.D.
Programming NT Touchpad
Number of Programs 8
Distance Between Shafts 15"
Section Modulus 35cm^3
Operating Voltage 220-440V 3ph
Bending speeds 20% faster than competitive machines
Forged roll shafts precision ground and fitted for maximum
performance and minimal deflection
Heavy duty structure and rigid components for high
section modulus ratings
Reinforced engineered mainframe design proven to
outperform competitive models
Simultaneous downfeed and roll movement minimizes
deformation
Programmable touch pad controls with digital center
roll positioning display
Memory storage with eight (8) individual programs
and unlimited passes
Remote control pendent with low voltage controls
and foot pedal switch
Threaded roll shafts with micrometric flange adjustment
helps eliminate spacer usage
machine was never used-like new condition
was 40K new |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11698 | Turret Punch Presses-CNC |
1984 |
amada |
304040 |
Excellent |
sold |
Photo /
More Info. |
30 Ton 58 Station: Amada PEGA 344 Q
Model 304040
Serial P3441364
30 Tons
58 Stations
Travels 39.37" x 39.37" (will punch 48" wide
sheet)
Control Fanuc P
|
|
Ad # 14063 | Single Station Punches-CNC |
|
Strippit |
Model SPM 500 |
Good |
sold |
Photo /
More Info. |
22 Ton: Strippit
MODEL SPM 500
MATERIAL THICKNESS, MAX. ----------------- .250"
MILD STEEL
HOLE CAPACITY IN 14 GA. MILD STEEL --------
3.500"
DIA.
HOLE CAPACITY IN .250" MILD STEEL ---------
1.125"
DIA.
ACCURACY WHEN NEW ------------------------- +/-
.005"
TONNAGE ----------------------------------- 22
U.S., 20 METRIC
WORKPIECE SIZE MAX., STANDARD -------------
39.375" X 19.7"
TURRET DRIVE ------------------------------ BI-
DIRECTIONAL
FEED CLEARANCE ---------------------------- .787"
PRODUCTION RATE --------------------------- 120
HPM, MILD STEEL USING 1" PUNCH
RAM MECHANISM -----------------------------
HYDRAULIC
AXIS SPEED, MAX. -------------------------- 787
IPM
FLOOR TO TOP OF TABLE --------------------- 35.4"
APPROXIMATE MACHINE WEIGHT ---------------- 9,500
LBS
APPROXIMATE MACHINE DIMENSIONS ------------ 88"
(LR) X 67"(FB) X 75"(H)
|
|
Ad # 12051 | Turret Punch Presses-CNC |
1984 |
Amada |
344Pega queen |
Excellent |
sold |
Photo /
More Info. |
30 ton 40" x 40": Specifications:
· Model: 344Q PEGA
· Year: 1984
· Capacity: 30 ton
· Sheet size: 40" x 40"
· Thickest material: 1/4" m.s.
· Max. Hole dia: 4 1/2"
· Number of stations: 58 (with 2 auto index stations)
· Strokes per minute: 350
· Axis speed: 2000 i.p.m.
· Turret rotation: 30 r.p.m.
· Hits per minute 1" moves: 220
· Nibbling hits per minute: 350
· Standard control: Fanuc 6m
· Main motor: 5 hp 220/3/60 volts
· Machine weight: 22,500 lbs.
|
|
We found 11 matching ads. Now displaying the remaining 11 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12736 | Riveters |
|
Gemcor |
48A |
Needs Work |
sold |
Photo /
More Info. |
48" Throat: Gemcor CounterSink riveting machine.
48" Throat x 10" Height
|
|
Ad # 11450 | Brakes Press: Mechanical |
1960s? |
Chicago |
46-B |
Good |
sold |
Photo /
More Info. |
45 Ton 4ft Brake : Chicago Dreis & Krump
45 Ton Press
4ft Between sides
6ft Max bending length
3" Throat |
|
Ad # 13379 | Roll Formers: Angle/Profile Bending Rolls |
1985 |
Roundo |
R6S |
Good |
sold |
Photo /
More Info. |
6" x 6" x 5/8": Roundo
Model R6S
6" x 6" x 5/8" capacity. Clean, low hours
machine, out of R&D facility.
Push Button operation w/ digital readout
Hydraulic guide arms
Can be inspected under power
Comes with universal tooling
|
|
Ad # 12390 | Crimping, Beading & Flanging Machines |
|
lockformer |
Pittsburg 18 |
Good |
sold |
Photo /
More Info. |
18 ga: Lockformer Pittsburg 18
18 GA |
|
Ad # 12395 | Hole Punches: Single,Turret and CNC |
|
WA Whitney |
002 |
Good |
sold |
Photo /
More Info. |
: WA Whitney
Creonics Control
4' x 8'
36" Throat
Hole Sizes
DIA Thickness
1.250 1/2
1.750 3/8
3.375 1/4
5.000 3/16 |
|
Ad # 12377 | Brakes Press: Mechanical |
? |
Verson Allsteel press |
TA2416 |
Good |
sold |
Photo /
More Info. |
475 ton x 20ft bed: Verson #TA2416 Mechanical Press Brake
tonnage :475 tons
Model #2416
20 Ft bed length
16'-5" Between Sides
housing
6" ram Stroke/adjustment
shut height:16"
throat depth:15"
strokes per min: 30 & 15
40 HP main motor
has 3 top dies and 10-12ft x 1.5" opening
bottom die
Slit in concrete required size
approx:194"lengthx63"deepx5.250" wide
Rigging/loading/dissasembly fee from
local rigger onto 4 trucks:$7500 |
|
Ad # 13998 | Brakes Press: Mechanical |
60s |
Lodge & Shipley |
120A10 |
Good |
sold |
Photo /
More Info. |
3/8" x 12 Ft: Lodge & Shipley
Model 120A10
Wired 220
120 Ton Mid Stroke
180 Ton Bottom Stroke
120 Punching Capacity
24" Auto back gauge
$10,000 worth of tooling included. |
|
Ad # 12161 | Hole Punches: Single,Turret and CNC |
1963 |
Wiedemann |
RA41P |
Good |
sold |
Photo /
More Info. |
15 Ton 3" Max tool Size: Wiedemann Model RA41P Turret Punch Press
16 Turret Station
1963
Voltage 208/3Phase
48" Table
Buckets of punches to go with it |
|
Ad # 11995 | Brakes Press: Mechanical |
1975? |
Chicago |
408D |
Excellent |
sold |
Photo /
More Info. |
10 ft x 120 Ton: Chicago
10ft x 120 Ton
Model 408D
Voltage 440/ 3phase
Machine is in Excellent working condition and is
under power. |
|
Ad # 10093 | Shrinker/Stretchers, English Wheels, Power Hammers |
na |
|
English Wheel |
|
Sold |
No Photo /
More Info. |
: |
|
Ad # 13156 | Notching / Nibbler Machines |
1996 |
Haco |
Maxi 250/6 |
Good |
sold |
Photo /
More Info. |
10" x 1/4 v notcher: Haco V Notcher
Model Maxi 250/6
10" x 1/4"
Voltage 220/440 Wired 440
90 Degree Cutting Angle
Table 35" x 28"
a little dirty but should clean up and operate fine |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12820 | Benders-Pipe and Tube |
|
Hossfeld |
No 2 |
Good |
sold |
Photo /
More Info. |
2" od tube: Hossfeld No 2
Hydralic unit bend up to 2" Tubing.
1-1/4" – 2" OD Tube
1" – 2" Sched. 40 Pipe
1-1/2" x 1-1/2" x 1/8" through 2" x 2" x 3/16" Angle Iron
3/4" –1-1/4" Round or Square Bar
Rectangular Tube up to 1" x 2"
Edgebend Flat stock up to 1/2" thick
Lots of railing dies included. |
|
Ad # 13131 | Benders-Pipe and Tube |
2002 |
Bema |
G 45 CN D-S |
Good |
sold |
Photo /
More Info. |
1.77" dia Tube max: Bema Model G 45 CND
Year 2002
BENDING CAPACITIES WITH STEEL
ROUND TUBE ---------- 1.77"dia X .098" wall
Max bending capacity using soft round tube:
brass, copper , aluminium: 1.97" x 0.119"
Max bending :SQUARE TUBE ------- 1.38" X .06"wall
Min bend radius : 0.86in
max work length: 14.77 ft
RECTANGULAR TUBE,BENT SIDE-1.57" X .8" X .08"
RECTANGULAR TUBE,BENT FLAT-1.57" X .8" X .118"
MAX BENDING RADIUS WITH ROLLERS ------- 9"
INTERIOR MIN BENDING RADIUS ----------- .87"
MAX BENDING ANGLE --------------------- 190
DEGREES
MAX LENGTH ---------------------------- 133"
INDEX OF ROTATION SPEED --------------- 110
DEGREES/SECOND
MAX ABSORBED POWER -------------------- 13 HP
NOISE --------------------------------- 75 dB
APPROX. WEIGHT ------------------------ 3500 LBS
operating power: 8.5KW ---note: 400/3volt base
machine-european ,comes with 220/3 transformer
also includes dies for 5/8" dia round tube only |
|
Ad # 11846 | Benders-Pipe and Tube |
80s |
Pines |
T3 |
Excellent |
sold |
Photo /
More Info. |
Pines 1" 1/2": Pines T3
Serial 44361 - 78250
Capcity 1" 1/2"
Volts 230/3Phase
Dial A Bend Controll |
|
We found 14 matching ads. Now displaying the remaining 14 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12825 | Manual: Hole / Turret Punches |
|
Roper Whitey |
No 16 No 20 |
Good |
sold |
Photo /
More Info. |
1/2" Hole max: Roper Whitney No 16 and No 20 Hand Punches
1/2" Hole in 1/4"
1/2" max hole size
2 similiar units available # 16 & # 20 |
|
Ad # 12823 | Ironworkers |
70's |
Carlstadt |
N-58 |
Good |
sold |
Photo /
More Info. |
Bar/picket Twister machine 1/2" sq: Carlstadt bar twisting machine
1/2" sq solid rod w/ optional 5/8" acc
3/4HP
base 12" x 18"
some bushings included
Men E Uses no 2
Picket Twister-twists square bars quickly and easily for railings, grills ect.-bars remain straight after twisting
drum switch permits accurate control for bar end alignments
manuals |
|
Ad # 12821 | Manual: Hole / Turret Punches |
? |
rotex |
15-L |
Good |
sold |
Photo /
More Info. |
12 station, 2: max hole , 8 ton force: used Rotex punch #15-L
8 ton force
2" Hole Max
12 Station
12" throat
no stand |
|
Ad # 12765 | Ironworkers |
1992 |
Rogers Manufacturing |
Presshear 10# |
Good |
sold |
Photo /
More Info. |
18 Ton: Rogers Manufacturing -Presshear # 10
Power Ironworker
PRESSHEAR # 10
PUNCH CAPACITY - 18 TONS
ACCESSORIES SOLD SEPARATELY
PIPE NOTCHER - SPEAR POINT
BENDING DIE - COPER
SQUARE TUBING CUTTER
NOTCHER - PUNCH OILING SYSTEM
This machine is both a punch and a shear.
Cast-frame - high tensile ductile iron.
Operates on 1 HP, 1750 RPM motor. Three phase or single phase available.
Foot operated, one stroke safety clutch.
Front is conventional press and can be used for punching or forming
Regular die sets will fit this machine
Adjustable ram.
Hold-down easily adjusted.
Punch can be lowered to material for center punching and will remain until clutch is engaged.
Blades are tool steel - Can be re-sharpened and adjusted.
Punch to back of throat - 3"
Bar hole for lowering punch by hand.
Blade guard, foot lever guard, and gear guard for operators protection
Approximately 48 strokes per minute.
basic specs below-lots of acc availablr for this machine
Punch 3/4 x 1/4
Throat 3"
2" x 2" x 1/4 Angle Iron
3/4" Round
3/4" Square
1/4"x 4" Flats
2 x 1/2 x 1/8" channel
punches 7/8" round hole thru 1/4" mtl
2" stroke
shut height : 6-1/2"
2" Stroke
more details at http://www.rogers-mfg-inc.com/
|
|
Ad # 11613 | Ironworkers |
1980 |
Scotchman |
5075 |
Good |
sold |
Photo /
More Info. |
50 ton: Scotchman 50 Ton Iron worker
4" angle shear
24" plate shear
Runs Fine.
Comes with some tooling.
|
|
Ad # 11608 | Ironworkers |
2001 |
Scotchman |
12012-24M |
Very Good |
sold |
Photo /
More Info. |
120 ton: Scotchman model 12012-24m
120 Ton
5 HP
Punch 1 1/2" Hole in 1"
Shear capacity:1" x 12";3/4" x 16";1/2" x 24"
Angle shear 6" x 6" x 1/2" included
1 1/4" Round Bar max capacity
1" Square Bar capacity
12" Throat on punch
notcher acc
13" x 24" Punch Table included
a few misc punches included
foot pedal
new blades |
|
Ad # 11607 | Ironworkers |
2003 |
Scotchman |
8507-14M |
Very Good |
sold |
Photo /
More Info. |
85 Ton Fully intergrated: Fully Intergrated FI 85/140
85 Ton Punch
140 plate shear tonnage
Punch 1-1/16" Hole 1" Thick
Shear 1" x 12" Plate
6" x 6" 1/2" Angle
1 3/8" Round Bar Shear
1-1/4 Square Bar
6" Throat
Notching 3"
no round stock blade in machine
has new blades in other location |
|
Ad # 12741 | Ironworkers |
|
Peddinghaus |
Peddiworker 880 |
Good |
sold |
Photo /
More Info. |
88 Ton: Peddinghaus Peddiworker 880
Voltage 220/3 Phase
88 Ton
hydraulic
8" Throat on punch
12" Shear Blade
5" Angle Shear
Notcher
std specs below
Model # Peddiworker 880
Tons : 88
Capacity: 4'' x 4'' x 3/8'' - 5"x 5"x 1/2" angle 88 Capacity: 4'' x 4'' x 3/8'' - 5"x 5"x 1/2" angle 5/8" x 14" bar 1-1/4" thru 3/4" 1-3/16" sq. & 1 ¼'' round
5/8" x 14" bar
1-1/4" thru 3/4"
1-3/16" sq. & 1 ¼'' round bar
Voltage : 230
Approx wt: 2,650 lbs.
Approx. dim. : 49'' x 27'' x 72'' t
Equipped with:
Coping notcher |
|
Ad # 11448 | Ironworkers |
1980 |
Hill ACME |
#6 |
Excellent |
sold |
Photo /
More Info. |
95 Ton 15hp: Hill ACME 95 Ton
Dual Foot Switch
24" Throat Depth
Punching Capacity
1-1/4" Thru 7/8" ; 1-3/16" Thru 1"
1-1/2" Stroke 65 SPM
Plate Shear
6" x 1-1/8" 10" x 3/4" 14" x 1/2"
Bar Shear
2-3/16" Round 2" Square
Angle Stock
6" x 6" x 1/2" 4" x 4" x 1/2" Tees
Notcher
Rectangular........3-1/4" x 3-1/4" x 1/2"
90 Degree V.......1/2" x 2-1/4" Deep
|
|
Ad # 11370 | Ironworkers |
2000s |
Uni hydro |
P50-14 |
Excellent |
sold |
Photo /
More Info. |
50 Ton Uni Hydro: 50 Ton
Uni-Hydro
Wired 220 Single Phase
Maximum Flat Angle
4" x 4" X 1/2"
Maximum Flat Bar
1/2" x 10" 5/8" x 8" 3/4" x 6"
Maximum Hole Punch
1" Diameter in 1/2"
|
|
Ad # 13897 | Ironworkers |
2003 |
scotchman |
5014 TM |
Good |
sold |
Photo /
More Info. |
50 Ton: Scotchman
Model 5014 TM
Wired 460
50 Ton Punch Station with 3-Station Revolving Turret (1-1/4" in 1/2" and 13/16" in 3/4")
Keyed Punch Ram for Safety
4" Throat Depth
Three 2" Die Holders, Three Punch Nuts with Wrench and Three Strippers
Adjustable Stroke Control
Angle Shear 4" x 4" x 3/8" at 90° and 2" x 2" x 3/8" at 45°
14" Flat Bar Shear with 4-Way Reversible Blade (3/4" x 4", 1/2" x 8", 3/8" x 10", 1/4" x 14")
Rectangular Notcher, 2-1/2" x 3" x 5/16" , 2-1/2" x 2-3/4" x 3/8"
Tool Table Work Area
Punching Capacity 50 ton
1-1/4" in 1/2"
13/16" in 3/4"
Special Tooling 2-1/4" Max. Dia.
Throat Depth 4" 100 mm
Flat Bar Shear 14" Length
3/4" x 4"
1/2" x 8"
3/8" x 10"
1/4" x 14"
Angle Shear 90° 4" x 4" x 3/8"
Strokes Per Minute in Light Material [Punch Station] 1/4" stroke
Strokes Per Minute in Heavy Material [Punch Station] 3/4" stroke
Hydraulics 2100 psi
All Guards Necessary to Comply with ANSI B 11-5 Standards
Forklift Accommodations
Made in USA
Optional Tooling not included with this machine! But available New if required.
90° V. Notcher 6" x 6" x 1/8"
3" x 3" x 1/4"
Rod Shear
Round Rod (Max.)
Square Rod (Max.) 1/4" to 1"
5 Cavity
7/16", 9/16"
5/8", 3/4", 1"
1/4" to 3/4" 1 Cavity 3/4"
Square Tube Shear 1/2" to 1" 12 ga.
Picket Tool 1/2" 3/4" 1" 16 gauge |
|
Ad # 13891 | Ironworkers |
1980 |
Scotchman |
5075 |
Good |
sold |
Photo /
More Info. |
50 Ton: Scotchman Iron Worker
Model 5075
24" Shear Blade
hole punch: 1" thru 1/2" mtl steelw/7.5" depth on the punch throat
Angle Shear: 6" x 6" x 3/8"
Rod Shear:optional
bar shear: 24" max length
Many misc Punches included
main motor:5 HP motor
Shear Blades have been resharpened |
|
Ad # 11998 | Ironworkers |
95 |
Dvorak |
314 |
Excellent |
sold |
Photo /
More Info. |
40 Ton: Dvorak Iron Worker
Model 314
220 single Phase
40 Ton
Angle Shear
3" x 3" x 1/4"
Shear
1/2 x 6"
3/16 x 12"
Punch 1" 1/4" x 1/4"
|
|
Ad # 13178 | Manual: Hole / Turret Punches |
|
Whitey |
No 20 |
Good |
sold |
Photo /
More Info. |
20 Ton: Whitey Punch No 20
20 Ton
2" 1/4" Throat
1/2" Hole in 1/2" Mild Steel
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11676 | Spot Welders |
1967 |
Progressive Spot Welder |
? |
Very Good |
sold |
Photo /
More Info. |
50 KVA 12" Throat: Progressive Spot Welder
50 KVA
12" Throat
|
|
Ad # 14107 | Spot Welders |
1970s |
REX |
FRU |
Good |
sold |
Photo /
More Info. |
14 Ga Max 20 KVA: Rex Spot Welder
20 KVA
16" Throat
220 Single Phase
Water Cooled
|
|
We found 8 matching ads. Now displaying the remaining 8 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13658 | OBI Presses |
1979 |
Federal |
7-53 |
Fair |
sold |
Photo /
More Info. |
7 Ton: Federal Press
7 Ton
Table size: 28" x 35"
14" throat
Voltage: 220
Year: 1979
Stroke Length 4" |
|
Ad # 11620 | Hydraulic C-Frame Press |
1972 |
Denison |
FH10-30H-Speacial |
Excellent |
sold |
Photo /
More Info. |
10 Ton Deap Draw 12": Abex Dension
10 Ton Deap Draw
12" Storke
10" Throat
Ram Dia. 2.5"
Cyl. Bore 3.625"
Table 18" x 24"
Max Psi 2000
30 Hp
Wired 220
Year 72
|
|
Ad # 11451 | OBI Presses |
1950s |
BLISS |
19 1/2 |
Very Good |
sold |
Photo /
More Info. |
19 1/2 Ton Bliss: Bliss 19 1/2 Ton
Inclinable Press
recipricating type,fly wheel type
mechanical clutch type, uses no air
Bliss specs:
shank dia: 1.5"
bed area : 12"front to back x 20" left to right
stroke: 2.5"
ram adj: approx: 3"
max shut height: 7"
strokes approx 100/min..variable
|
|
Ad # 11353 | OBI Presses |
|
Rousselle |
2 |
Very Good |
sold |
Photo /
More Info. |
15 Ton: 15 TON ROUSSELLE O.B.I. PUNCH PRESS
MODEL 2
CAPACITY................................... 15
TONS
STROKE..................................... 2"
BED AREA................................... 11" X
16"
OPENING IN BED............................. 5" X
8"
WIDTH OF OPENING THROUGH BACK.............. 8-
1/2"
DEPTH OF THROAT............................ 5-
1/2"
WIDTH OF SLIDE ACROSS EARS................. 6-
1/2"
SHUT HEIGHT...(S.D.A.U).................... 7-
3/4"
STROKES PER MINUTE.........................
VARIABLE
|
|
Ad # 11352 | OBI Presses |
? |
Walsh |
28 |
Good |
sold |
Photo /
More Info. |
30 Ton 1.5" stroke Walsh model 28: Walsh Model 28
30 Ton
1.5" stroke
|
|
Ad # 11257 | OBI Presses |
|
Minster |
|
Good |
sold |
Photo /
More Info. |
Minster 110 ton OBI Press: 8” stroke
22” SH
3” adj.
0-100 SPM
40” x 26” bed
Littel 12” wide feed
Imco Load Monitor
Air Clutch/Brake/Counterbalances
Motor/Electrics/Controls/Dual Palm Buttons
rigging/ loading fee $2000.00 |
|
Ad # 11253 | Hydraulic 4 Post Press |
1972 |
Kux |
MP-600-1 |
Very Good |
sold |
Photo /
More Info. |
Kux 600 Ton Press MP-600-1 : Max compact size, diameter or length 10”.
Depth of Die fill is adjustable 0 to 10”.
Lower punch stroke is adjustable 0 to 10”.
Die penetration stroke of the upper punch is adjustable from 0 to 5”.
Number of cycles per minute is adjustable up to 7. Horsepower is 250 with a Max line pressure of 3000 PSI.
Complete Hydraulic System. |
|
Ad # 12034 | Feeders |
|
Rowe |
60" wide max .100 |
Excellent |
sold |
No Photo /
More Info. |
60" Wide Cut To length .100: Rowe Cut to Length Line
20,000 Ib 60" width x .100 Max thinkness
-Rowe Mode 20660 DSV Loader
-Rowe 12V 60-HD-4.5 Uncoiler
-Rowe Model HMP 50-60 Straightener/Trimer
-Rowe Model 1262- HS Shear
-Rowe Model CVR-PS 60-14 Convoyer
-Rowe STKR - DTS 60 Stacker
|
|
We found 6 matching ads. Now displaying the remaining 6 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11764 | Tracer type |
? |
Union Carbide |
CM 250 |
Excellent |
sold |
Photo /
More Info. |
5" x 14" Flame Table: Union Carbide CM 250
5" x 12" Flame Table
Ast Tracer Eye
Burny Digital Control |
|
Ad # 14335 | Plasma |
1997 |
Komatsu |
Rasor Rev II |
Good |
Sold |
Photo /
More Info. |
6ft x 12ft: Komatsu Rasor Rev II
1997
Komatsu Fine Plasma Cutter G990-II
6ft x 14ft
Fume Extractor
Rasor Rev II Control
220 voltage
Cutting capacities include mild steel up to 1"
(25.4 mm), aluminum up to 3/4" (19 mm) and
stainless up to 3/4" (19 mm).
rapid traverse speed capable of 1200 inches per
minute,
an open table design to accommodate deep parts
interface capability with third party CAD/CAM
systems.
http://www.komatsuplasma.com/kai/ctd/en/rasorre
v/pdf/rasorrev.pdf |
|
Ad # 12655 | Plasma |
1998 |
Lockformer |
Vulcan 2900 |
Good |
sold |
Photo /
More Info. |
5' x 10': LockFormer Vulcan 2900
5ft x 10ft
Hypertherm HT40C Plasma Cutter
Hankison Air Dryer
|
|
Ad # 11408 | Plasma |
|
Lockformer |
Vulcan 1000 |
Good |
sold |
Photo /
More Info. |
5ft x 10ft : Lockformer Vulcan Plasma Table
5ft x 10ft |
|
Ad # 11358 | Tracer type |
1960s |
Esab-Heath Shape Cutter |
MCD |
Very Good |
sold |
Photo /
More Info. |
ESAB 10' x 6' Table Tracer: Tracer Flame Cutting Table w/ tracing eye
10' x 6' Capacity
Has been used to cut 3" thick Steel
|
|
Ad # 13962 | Laser |
1997 |
Amada |
2415 XL |
Good |
sold |
Photo /
More Info. |
1500 Watt: 1500 WATT AMADA PULSAR LC2415XLA2 CNC LASER
MFG: 1997 - APPROXIMATELY 52,000TOTAL HOURS
CNC Controller
Model: FANUC 16-L - 32 bit
Display: LCD Color Graphics Display
Control Function: X, Y,Z, and B Simultaneous 3
Axis and B axis Laser
Power Control
Input Method: MDI, Edit, DNC or 3" PC Compatible
Floppy Disk
Minimum Command Unit: 0.0001" (X, Y, Z)
Minimum Travel Unit: 0.0001" (X, Y, Z)
Standard Memory: 128K (320m)
Optional Memory: Expandable to 256K or 512K
Operating Modes: Automatic, MDI& Manual
Display Modes: Program Contents, Position
Information, Program Check, Settings, Parameters,
Beam Diameter Compensation, Assist Gas Status,
Self
Diagnostics: Interlock Displays Water
Temperature,
Gas Pressure, Vacuum Leak, Blower, Malfunction,
Shutter Power, Discharge, Assist Gas, Door Open,
Electrical Requirements: Included in Machine
Requirements
Motion Package
Travel Method: X axis for work piece movement, Y
axis for cutting head movement
Control Method: X, Y& Z simultaneous 3 axis
control and B axis
Drive Motors: FANUC AC Servo (X, Y, Z and B)
Maximum Sheet Size: 61" (Y) x 198" (X) with one
repositioning cycle
Maximum Axis Travel: 61" (Y) x 99" (X) x 11.8"
(Z)
x 0.78" (B)
Maximum Cutting Speed: 785 IPM (1)
Maximum Table Speed: 1575 IPM per axis (1)
Positioning Accuracy: 1: 0.0004" Repeat (1)
Repeatability: 0.0002" (1)
Maximum Material Weight: 727 lbs.
Maximum Material Thickness;
.375" Carbon Steel
.187" Stainless Steel (clean cut)
.125" Aluminum
Work Chute: 66" (Y) x 21" (X)
Assist Gas: 4 ports,
Electrical Requirements: 208 VAC, 3 phase, 60
Hz.,
75Kva
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12737 | Air Dryers |
|
Anderson Industrial |
Air Dyer |
Fair |
sold |
Photo /
More Info. |
: |
|
Ad # 12219 | Air Compressors, Piston Type |
|
Saylor Beall |
705 |
Good |
sold |
Photo /
More Info. |
Model 705 2 HP 80 Gallon: Saylor Bell Air Compressor
3 Hp 175 PSI Max 80 Gallon. |
|
Ad # 11206 | Air Compressors, Rotary Screw Type |
1980 |
Ingersoll Rand |
250 |
Fair |
sold |
Photo /
More Info. |
250 CFM: Engine is Deutz Corperation. 250CFM. |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12173 | Coordinate Measuring Machine, (CMM) |
90s |
Brown and Sharpe |
MicroVAL |
Good |
sold |
Photo /
More Info. |
24" x 18" x 12": Brown and Sharp CMM
Micro Val
24" x 18" x 12"
Granite Plate has no Chips/scraches |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14197 | Injection Molding Machines |
1984 |
Nissei |
PS50E5ASE |
Good |
sold |
No Photo /
More Info. |
20 Ton: Nissei
20 Ton
2 Oz shot Size
Heater 4.3 KW
Motor 5.5 KW
9" 1/2" Between All 4 rails
13" 1/2" Across
14" x 14"
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13340 | Welding Robots |
1999 |
Panasonic |
VR-008AII |
Good |
sold |
Photo /
More Info. |
50": Panasonic VR 008A II
Max payload 8 kg (20 ibs)
50" Reach
Located in 10ft x 10ft x 7ft Work Cell
Voltage 220/ 3 Phase
Panasonic Dip Pulse Mig
Model HM 350
Two units have Panasonic Positioners
Max payload 500kg (1100 lbs)
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12547 | Heat Treat Ovens |
|
Dispatch Oven |
|
Good |
sold |
Photo /
More Info. |
18" x 32" x 24": Dispatch Oven
1000 Degrees F
18" x 32" x 24"
Max temp 1000 Degrees F
|
|
Ad # 12341 | Heat Treat Ovens |
|
GCA/Vacuum Industries |
2027 |
Good |
sold |
Photo /
More Info. |
1123 Degree C / 2200 def F: GCA/Vacuum Industries
Heat Treat / Autoclave
0-2000 tc Vacuum Guage
20 KVA Voltage 440
1123 Degrees C or 2200 deg F
Aprrox working 10" x 10 x 16" |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13334 | Cranes/Hoists & Manipulators |
2007? |
Knight |
Assist Station 6 |
Good |
sold |
Photo /
More Info. |
700 ibs: Knight
Lift assist Model Assist Station 6
Max Cap. 700 lbs
5 ft Arm with 4 ft rotating Arm total 9 ft
reach
Two Model :Assist Station 6 Max load 700 lbs
Price for $4995 each.
Also available A knight Jib Crane Max load
225lbs Price for Jib Crane $1995
|
|
We found 7 matching ads. Now displaying the remaining 7 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12674 | Cleaning Equipment |
|
aqueous |
81.8 |
Good |
sold |
Photo /
More Info. |
21" x 45" x 25": Aqueous parts washer
Air Power Lid
Heater (electric)
Working Area 21" x 45" x 25"
2 avialable |
|
Ad # 12391 | Bead & Shot Blasters |
1995 |
USMW |
RMC 144SB |
Good |
sold |
Photo /
More Info. |
Bake Oven and Shot Blaster: USMW
Slow Bake Oven and Shot Blasting system
Year 1995
43" x 30" Working area. Shot Blaster
48" x 36" x 32" Bake Oven |
|
Ad # 12258 | Bead & Shot Blasters |
80s |
Wheelabrator |
72" |
Excellent |
sold |
Photo /
More Info. |
72" dual Table: Wheelabrator
72" Dual Round Tables
Max Height 36"
Steel Shot
Dust Collector
Voltage 480/3
|
|
Ad # 11290 | Cleaning Equipment |
|
Hydro Blast |
175 |
Excellent |
Sold |
Photo /
More Info. |
Automatic Parts Washer 150 Gallon. 40" turn table.: Automatic parts washer
40" turn table
40" diameter x 58 high cleaning area
150 gallon heated parts washer |
|
Ad # 11230 | Vibratory Equipment |
? |
Gaint |
GB 3 |
Fair |
sold |
Photo /
More Info. |
3 Cubic Feet: 3 Cubic Feet
32" Diameter Working Area.
16" Center Post.
14" Depth. |
|
Ad # 11208 | Bead & Shot Blasters |
1996 |
Einvrosafe |
2450-298 |
Excellent |
sold |
Photo /
More Info. |
1200Ibs Pot Plastic Media Blaster: Plastic Media Blaster with blast hoses and filters.
MAWP 125 PSI A 250 Degrees F
MDMT 20 Degrees F A 125 PSI
SH 250
HD 226 150 |
|
Ad # 11207 | Bead & Shot Blasters |
1980s |
schmidt |
|
Fair |
sold |
Photo /
More Info. |
400 ibs: 400 Ibs sand blaster can be used with glass media.
150psi max pressure. |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12534 | Sanders |
|
Crouch |
205 |
Good |
sold |
Photo /
More Info. |
48" : Crouch Model 205
110/220 Voltage single phase
3 HP
5" height capacity
platen length 50"
6 x 132 inch belt capacity.
Belt speed 3100fpm |
|
Ad # 12544 | Sanders |
|
Timesaver |
343-SG |
Good |
sold |
Photo /
More Info. |
42": Time Saver
Model 343-SG
Voltage 440 Volts
50Hp? |
|
Ad # 12084 | Sanders |
|
Timesaver |
337-1m |
Excellent |
sold |
Photo /
More Info. |
36" : TimeSaver
Model 337-1M
36"
220/3 Phase
Dust Collector |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|