|
User SearchYour search results (if any) appear below in groups of 75 for each section.
Sawing Equipment
We found 20 matching ads. Now displaying the remaining 20 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8367 | Vertical Band Saws |
| 1974 |
Tannewitz |
PV-1-E |
Good |
Sold |
Photo /
More Info. |
| 30in x 14in, Tilt Frame, Vertical Band Saw: USED 30" TANNEWITZ VERTICAL BAND SAW
Throat Depth:30"
Maximum Work Thickness:14"
Table Size:27.75" L R x 25.5" F B
Table Tilt:45 deg. Right
10 deg. Left
Floor to Top of Table:38.5"
Front Edge of Table to Saw:13"
Wheel Diameters:30"
Upper Wheel Vertical Adjustment:5.5"
Maximum Band Length:16'6"
Band Width:1/8" - 1.5"
EQUIPPED WITH:
Pushbuttons For Start Stop
Hand Wheels For Upper Wheel
Vertical Adj. & Table Tilt
5 HP 1150 RPM 330/460/3/60 Motor
|
|
| Ad # 8363 | Vertical Band Saws |
| 1985 |
Marvel |
Series 8 Mark I |
Good |
Sold |
Photo /
More Info. |
| 18" x 20" Mild Steel: USED 18" x 20" MARVEL VERTICAL BAND SAW
Capacities:18" x 20" Mild Steel - Nominal
18" x 22-1/2" Mild Steel - Maximum
18" x 12-1/4" Mild Steel @ 45dg - Nominal
18" x 13" Mild Steel @ 45dg - Maximum
Working Surface Of Table: 24-1/4" L-R x 33" F-B (T-Slotted)
Maximum Tilt Of Column & Blade:45dg-Left Or Right
Blade Size:14'6" Long x 1" Thick
Distance Floor To Table:36"
Blade Speeds Approx:50-450 FPM
Equipped With:Operating Control w/Pushbuttons
For Start-Stop
Blade Speed Adjustment With Direct
Reading Dial
Selector Switch For Neutral Feed
Coolant Pump & Chip Pan
6" High Quick Acting Vise
Handwheel To Move Blade & Column
1/4 Coolant Pump Motor
2 HP 1800 RPM 220/440/3/60
V.S. Drive Motor
|
|
| Ad # 8360 | Vertical Band Saws |
| — |
Doall |
1612-3 |
Good |
sold |
Photo /
More Info. |
| 16in Doall, 24" x 30.5in Table, 35-6000 FPM, with Welder, Grinder: USED 16" DOALL CONTOURMATIC VERTICAL BAND SAW
Throat Depth:16"
Maximum Work Thickness:12"
Table Size:24" L-R x 30-1/2" F-B
Table Tilt:45dg To Right
10dg To Left
Band Size:125" Length x 1" Thick
Wheel Diameter:16-1/4"
Upper Wheel Adjustment:3-1/2"
Floor To Top Of Table:45"
Band Speeds Approx:35-6000 FPM
Equipped With:
Model DFW-15 Doall Welder, Grinder & Shear
Doall Band Speed & Band Tension Indicators
Push Buttons For Start - Stop
Selector Switch For Straight-Contour
Coolant & Chip Drawer
Variable Speed Control Via Hand Wheel
Gear Shift Lever For Medium - High - Low
Drum Switch For Reverse - Stop -
Approach-Feed
3 HP 1745 RPM 230/460/3/60 V/S
Drive Motor
|
|
| Ad # 8361 | Tilt Frame Vertical Band Saw |
| 1995 |
Hemsaw |
V-100LM-2 |
Good |
sold |
Photo /
More Info. |
| 18in Xx 20in HEM (Hemsaw), 26in x 26in Table, 60-400 FPM: USED 18" x 20" HEM (HEMSAW) VERTICAL BAND SAW
Capacities:
18" x 20" Mild Steel @ 90dg
18" x 14" Mild Steel @ 45dg
Working Surface Of Table:26" x 26"
Maximum Tilt Of Column & Blade:45 Dg. Left Or Right
Blade Size:14'3" Long x 1-1/4" Wide
Distance Floor To Table:36"
Blade Speeds Approx:60-400 S.F.P.M.
Equipped With:
Air Powered Head Clamp For Tilting
Arm With Control For On-Off
Air Powered Blade Tension With Control
8" High Air Powered Vise With Control
Selector Switch For Motor On-Off
Saw Vise Open-Close
Arm Forward-Stop-Retract Feed Rate Micrometer Knob
Cutting Pressure & Clamp Pressure
Gauges Coolant Pump & Chip Pan With Control For Coolant Auto-Off-On 5 HP 1800 RPM 220/440/3/60
Blade Drive Motor
|
|
| Ad # 8359 | Tilt Frame Vertical Band Saw |
| — |
Marvel |
V-10A |
Good |
sold |
Photo /
More Info. |
| 10" x 10" Mild Steel: USED 10" x 10" MARVEL BAND SAW
Automatic Shuttle Type Hydraulic Bar Feed
Capacity:10" x 10" Mild Steel
7" x 10" Mild Steel @ 45°
Working Surface Of Table:22" L-R x 24" F-B
Maximum Tilt Of Column & Blade:45°-Right
Blade Size:12' Long x 1" Width
Distance Floor To Table:35"
Blade Speeds Approx:60-400 FPM
Equipped With:Operating Controls With Pushbuttons
For Start - Stop; Selector Switches
For Out-Of-Stock On-Off;
Cycle Single-Auto; Blade Stop-Run;
Shuttle Vise Closed-Open-Auto;
Piece Counter On-Off
Feed Pressure Control With Direct
Reading Dial
5-1/2" High Hydraulically Operated
Vise With Control
Coolant Pump
Hydraulic System Driven By
1-1/2 HP 1800 RPM 230/460/3/60
Motor
BAR FEED SPECIFICATION:
Length:15"
Weight Approximately:5000#
Will Push Up Work:10" x 10"
Equipped With:Manual Shuttle Control
Handwheel To Set Desired Index
|
|
| Ad # 8370 | Vertical Band Saws |
| 1974 |
Doall |
3612-3 |
Good |
Sold |
Photo /
More Info. |
| 36" x 12": USED 36" DOALL VERTICAL BAND SAW
Contourmatic
W/Hydraulic Sliding Table Feed
Throat Depth:36"
Maximum Work Thickness:12"
Table Size:30.5" L-R x 24" F-B x 12" Stroke (Hyd)
Auxiliary Table Size:20" L-R x 17" F-B
Table Tilt:45dg to Right
10dg to Left
Band Length:174" (3-Wheel)
125" (2-Wheel)
Wheel Diameter:16.25"
Upper Wheel Adjustment:3.75"
Band Width:1/16" to 1"
Floor to Top of Table:44.25"
Table Feed Rate Approx.:0 - 12 FPM
Band Speeds Approx.:35 - 6000 FPM (Variable)
EQUIPPED WITH:Model DBW-15 Doall Welder, Grinder &
Shear, S/N 290-744445
3-Speed Transmission
Recirculating Coolant System
Band Speed & Band Tension Indicator
Foot Control Switch For Table
Swivel Mounted Control Panel With
Pushbuttons For Start-Stop
Selector Switch For Manual - Foot
Pushbutton For Coolant
Drum Switch For Reverse-Stop-Feed-
Forward
Variable Speed Pulley Drive
|
|
| Ad # 8362 | Tilt Frame Vertical Band Saw |
| — |
Marvel |
81A 8/M5 |
Good |
sold |
Photo /
More Info. |
| 18in x 20in Marvel, Hyd., 30in x 33in Table, 60-400 FPM: USED 18" X 20" MARVEL VERTICAL BAND SAW
Hydraulic
w/Automatic Shuttle Type
Hydraulic Bar Feed
Capacities:
18" x 20" Mild Steel - 90dg
18" x 11 1/2" Mild Steel-45dg Left
18" x 13 1/2" Mild Steel-45dg Right
Working Surface Of Table:30" L-R x 33" F-B
Maximum Tilt of Column & Blade:45dg Left or Right (Powered)
Blade Size:14' 6" Long x 1-1/4" Thick
Distance Floor to Table:38"
Blade Speeds Approx:60 - 400 FPM
Equipped With:
Operating Control with Push Buttons
For Start - Stop
Selector Switches For Cycle Single -
Auto, Carriage - Forward - Stop -
Auto Return - Coolant - Off - Lube
Power Blade Guide With Selector
Switch For Up - Down
Power Tilt With Control
Carriage Control with Rapid Forward
Feed - Neutral & Rapid Return
Feed Pressure Control With Feed
Pressure Gauge
7" High Hydraulically Operated Vise
with Control
Blade Speed Selection via Hand Lever
Gusher Coolant Pump
1/4 HP Coolant Pump Motor
Hydraulic Pump Driven By
10 HP 1765 RPM 230/460/3/60 Main Motor
BAR FEED SPECIFICATIONS:
Length:10'
Will Push Up Work:18" x 20"
Maximum Weight:7000#
Maximum Gauging Length:24"
Equipped With:Manual Shuttle Control
Handwheel To Set Desired Index in
Inches or Millimeters
Overall Dimensions Approx. 60" L-R x 97" F-B x 94" H (SAW)
121" L-R x 50" F-B x 40" H (FEED)
|
|
| Ad # 8354 | Horizontal Band Saws |
| — |
Marvel |
15A4/M1 |
Good |
Sold |
Photo /
More Info. |
| 15" x 20" Mild Steel: USED 15" X 20" MARVEL HORIZONTAL HYDRAULIC SAW
w/Automatic Shuttle Bar Feed
Capacities:15" x 20" Mild Steel
15" Round - Mild Steel
Wheel Diameter:22"
Band Length:15'6"
Band Width:1-1/4"
Work Height:30"
Speeds Approx.:50 - 400 FPM
EQUIPPED WITH:Automatic Hydraulic Shuttle Stock
Feed w/0 - 24" Stroke
Multiple Indexing
Free Standing Control w/Coolant
Off-On; Shuttle Selector Manual
Automatic; Blade Speed Low -
High; Feed Traverse Control &
Feed Pressure Gauge
Selector Switch For Rapid Up &
Rapid Down
Work Height Selector & Blade Guide
Coolant Systems w/Pump
Pushbuttons for Start - Stop
2 HP Hydraulic Pump Motor
|
|
| Ad # 8365 | Vertical Band Saws |
| — |
Marvel |
8/M8/M2 |
Good |
Sold |
Photo /
More Info. |
| 18in x 24in MARVEL VERTICAL BAND SAW: USED 18" X 24" MARVEL VERTICAL BAND SAW
High Column Machine
Capacities:18" x 24" Mild Steel - Nominal
18" x 28" Mild Steel - Maximum
18" x 20-3/4" Blade @ 45Dg. Maximum
Working Surface of Table:32-3/4" L-R x 25-1/2 F-B (T-Slotted)
Maximum Tilt Of Column & Blade:45Dg. Left or Right
Blade Size:15'8" Long x 3/4"
Distance Floor To Table:33"
Blade Speeds Approx:50-200 FPM
Equipped With:
Power Feed With Adjustable Blade
Feed Pressure & Auto Stop
6" High Quick Acting Vise
Handwheel For Feed & Quick Return
Push Buttons For Start-Stop
Direct Reading Feed Scale
Protractor For Angle Of Column &
Blade
Joy Stick For High-Mid-Low
Blade Guides
1.33 HP 1800 RPM 230/460/3/60 Motor
|
|
| Ad # 8368 | Vertical Band Saws |
| — |
Doall |
Contour V-36 |
Good |
Sold |
Photo /
More Info. |
| 36" Doall, 30in x 30in Table, Welder/Grinder/Shear: USED 36" DOALL VERTICAL BAND SAW
Throat Depth:36"
Maximum Work Thickness:10"
Table Size:30" L-R x 30" F-B
Table Tilt:35dg - Forward
10dg - Both Sides & Rear
Auxiliary Table Size:20" L-R x 17" F-B
Wheel Diameter:16"
Band Length:162"
Band Width:1/2"
Band Speeds Approx.:50 - 1500 FPM
Floor to Top of Table:43-1/2"
EQUIPPED WITH:
Doall Welder, Grinder & Shear
Table Tilt Control Via Hand
Wheel
Hand Wheel Adjustment For
Blade Tension
Variable Speed Control Via
Hand Wheel
Air Chip Blower
Shift Lever For High & Low Speed
Pushbuttons For Start - Stop
1 HP 1740 RPM 220/440/3/60 Variable
Speed Pulley Drive Motor
|
|
| Ad # 8355 | Horizontal Band Saws |
| 1980 |
Do All |
C-1216A |
Good |
sold |
Photo /
More Info. |
| 12" x 16" Flats: USED 12" X 16" DOALL HORIZONTAL BAND SAW
Capacity:12" x 16" Flats
15" Round
Band Wheels:16" Diameter
Blade Size:1.5" x 162" x .035"
Work Height:30"
Blade Speeds Approx.:40-450 FPM
EQUIPPED WITH:Automatic Shuttle Type Bar Feed
w/24" Stroke
Clamp & Feed Hydraulic Vises
Hydraulic Head Elevation
Index Length Control w/Digital Readout
Automatic Hydraulic Tension Control Centralized Control w/Push-Pull Buttons For Hydraulic Start-Stop; Band Start-Stop; Auto Cycle Start-Stop; Selector Switches For Index Reverse-Hold-Forward; Index Vise Open-Automatic-Clamp; Fixed Vise Automatic-Open-Clamp & Operation Manual-Automatic Joystick For Saw Head Up-Hold; Automatic-Down Coolant Pump & Motor w/Control For On-Off Band Speed Fast-Hold-Slow & Feed Force Control Gauges For Band Speed In FPM & Feed Force In PSI Power Driven Band Chip Removal Brush 1/3 HP 3450 RPM Coolant Pump Motor 2 HP 1800 RPM 230/460/3/60 Hydraulic Pump Motor
5 HP 1800 RPM 230/460/3/60 Main Motor
|
|
| Ad # 8356 | Horizontal Band Saws |
| — |
Doall |
C-916 |
Good |
sold |
Photo /
More Info. |
| 9" x 16" Flats: USED 9" x 16" DOALL HORIZONTAL BAND SAW
Capacity:9" x 16" Flats
10-3/4" Rounds
Band Wheels:14-1/2" Diameter
Blade Size:159" Long x 1" Width
Work Height:26"
Blade Speeds Approx:105-275 FPM
Equipped With:Hydraulic Feed Control & Head
Release Valve
5-1/2" High Vise With Hand Lever
For Clamping
Recirculating Coolant Pump &
Chip Pan
Saw Blade Adjustment Guide
Power Driven Band Chip Removal
Brush
Push Buttons For Start-Stop
Selector Switch For Coolant
On-Off
Emergency Stop Button
V/S Drive Adjustment Via Handwheel
2 HP 1800 RPM 230/460/3/60 Motor
|
|
| Ad # 8364 | Vertical Band Saws |
| 1983 |
Marvel |
8 Mark I |
Good |
Sold |
Photo /
More Info. |
| 18in x 20in Marvel, Table 24.25in x 33in, 50-450 FPM: USED 18" X 20" MARVEL VERTICAL BAND SAW
NEW 1983
Capacities:
18" x 20" Mild Steel - Nominal
18" x 22.5" Mild Steel - Maximum
18" x 12.25" Mild Steel - 45dg - Nominal
18" x 13" Mild Steel @ 45dg Maximum
Working Surface of Table:24.25" L-R x 33" F-B (T-Slotted)
Maximum Tilt of Column & Blade: 45dg - Left or Right
Blade Size:14'6" Long x 1"
Distance Floor to Table:35.5"
Blade Speeds Approx.:50 - 450 FPM
EQUIPPED WITH:
Operating Control w/Pushbuttons
For Start - Stop
Selector Switch For Coolant On-Off
Blade Speed Adjustment With Direct
Reading Dial
Selector Switch For Neutral - Feed
6" High Quick Acting Vise
Hand Wheel to Move Blade & Column
Feed Pressure Control With Scale
1/4 HP 3450 RPM 230/460/3/60
Coolant Pump Motor
2 HP 1800 RPM 220/440/3/60 Variable
Speed Drive Motor
|
|
| Ad # 8357 | Horizontal Band Saws |
| — |
W.F. Wells |
L-9 |
Good |
Sold |
Photo /
More Info. |
| 9" X 16in W.F. WELLS HORIZONTAL BAND SAW: USED 9" X 16" W.F. WELLS HORIZONTAL BAND SAW
Capacity:9" Rounds
16" Flats
Band Wheel Size:15"
Blade Size:11'6" Length x 1" Width
Work Height:28"
Vise:5-3/4" High
Blade Speeds Approx.:50-90-120-260
EQUIPPED WITH:
Gusher Coolant Pump & Chip Pan
Hand Wheel For Vise Open-Close
Manually Adjustable Head Lowers
Hydraulically
Automatic Shutoff Switch
1/4 HP 3450 RPM 230/460/3/60 Coolant
Pump Motor
3/4 HP 1725 RPM 230/460/3/60 Motor
|
|
| Ad # 8369 | Vertical Band Saws |
| — |
Doall |
3612-3 |
Good |
sold |
Photo /
More Info. |
| 36": USED 36" DOALL CONTOUR-MATIC VERTICAL BAND SAW
Throat Depth:36"
Maximum Work Thickness:12"
Table Size:30.5" L-R x 24" F-B x 12" Stroke (Hyd)
Auxiliary Table Size:20" L-R x 17" F-B
Table Tilt:45dg to Right
10dg to Left
Band Length:175"
Band Width:1/16" - 1"
Wheel Diameter:16.25"
Upper Wheel Adjustment:3.75"
Band Width:1/16" - 1"
Floor to Top of Table:45"
Band Speeds Approx.:35 - 6000 RPM (Variable)
EQUIPPED WITH:Doall Model DBW-15 Welder,
Grinder & Shear
3-Speed Transmission
Recirculating Coolant System
Band Speed & Band Tension Indicators
Drum Switch For Table Feed Reverse-
Stop; Feed Forward
Swivel Mounted Control
w/Pushbuttons For Coolant
Start-Stop; Drive Start-Stop
Saw Guide Post w/Adjustment
Variable Speed Drive Adjustment Via
Hand Wheel
Coolant & Chip Drawer
1/3 HP 3450 RPM 220/440/3/60
Coolant Pump Motor
3 HP 1750 RPM 208/220/440/3/60
Variable Speed Drive Motor
|
|
| Ad # 8366 | Vertical Band Saws |
| — |
Doall |
2013-10 |
Good |
Sold |
Photo /
More Info. |
| 20": USED 20" DOALL CONTOURMATIC VERTICAL BAND SAW
Throat Depth:20"
Maximum Work Thickness:13"
Table Size:26" L-R x 26" F-B
Table Tilt:45dg to Right
10dg to Left
Band Length:154"
Band Width:1/16" - 1"
Wheel Diameter:20"
Floor to Top of Table:43"
Band speeds Approx.:50 - 5200 FPM
EQUIPPED WITH:Doall Model DBW-15 Welder, Grinder &
Shear w/Control
Doall Band Speed Indicator
Band Tension Adjustment
Contouring Attachment
Adjustable Insert Guides
Pushbuttons For Start - Stop
Handwheels For Variable Speed Drive &
Feed Heavy or Light
Work Light
Mounted on Portable I-Beam
3 HP 1755 RPM 230/460/3/60 Variable
Speed Drive Motor
|
|
| Ad # 8358 | Horizontal Band Saws |
| — |
Kalamazoo |
— |
Good |
Sold |
Photo /
More Info. |
| 8" x 16" Flat: USED 8" X 16" KALAMZOO HORIZONTAL BAND SAW
Capacity:8" x 16" Flat
8" Round
Wheel Diameter:14"
Band Width:3/4"
Band Length:10'5"
Band Thickness:.032"
Work Height:26"
Blade Speeds Approx.:53-96-160-266 FPM
EQUIPPED WITH:Pushbuttons For Start & Stop
4-3/4" High Vise Hand Wheel to Open & Close Vise Micro-Switch For Auto-Stop
3/4 HP 1445 RPM 220/440/3/60 Motor
|
|
| Ad # 4594 | Vertical Band Saws |
| 1974 |
DoAll |
3612-3 |
Good |
Sold |
Photo /
More Info. |
| 36" DOALL VERTICAL BAND SAW: 36" x 12" Doall #3612-3, tilt frame, hyd. sliding table feed, welder/grinde... |
|
| Ad # 4592 | Vertical Band Saws |
| 1974 |
TANNEWITZ |
PV-1-E |
Good |
Sold |
Photo /
More Info. |
| USED 30" TANNEWITZ VERTICAL BAND SAW: 30" x 14" Tannewitz #PV-1-E, tilt frame
Throat Depth: 30"
Maximum Work Thickness:14"
Table Size: 27.75" L R x 25.5" F B
Table Tilt: 45 deg. Right
10 deg. Left
Floor to Top of Table:38.5"
Front Edge of Table to Saw:13"
Wheel Diameters:30"
Upper Wheel Vertical Adjustment: 5.5"
Maximum Band Length:16'6"
Band Width: 1/8" - 1.5"
EQUIPPED WITH: Pushbuttons For Start Stop
Hand Wheels For Upper Wheel
Vertical Adj. & Table Tilt
5 HP 1150 RPM 330/460/3/60 Motor |
|
| Ad # 4589 | Vertical Band Saws |
| 1956 |
DoALL |
26-3 |
Good |
Sold |
Photo /
More Info. |
| 26" DOALL VERTICAL BAND SAW: 26" Doall, Mdl 26-3, 41" x 32" Table, 16" Str, 55 - 5000 FPM
CONTOURMATIC HEAVY DUTY
Throat Depth: 26"
Maximum Work Thickness:13"
Table Size: 41" L-R x 32" F-B (T-Slotted)
Table Stroke: 16"
Table Tilt: 45° - Right
5° - Left
Band Length: 186"
Wheel Diameter: 26"
Upper Wheel Adjustment:3"
Band Width: 1"
Floor to Top of Table:42.75"
Table Feed Rate Approx.: 0 - 8 FPM
Band Speeds Approx.:55 - 5000 FPM
EQUIPPED WITH: Band Speed & Band Tension Indicators
Drum Switch Control For Forward -
Reverse - Feed - Stop
Pushbuttons For Start - Stop
Table Tilt Lock Control
Transmission Shift Lever For
Selector Speed Ranges
Coolant Pump w/Toggle Switch Control
Speed Indicator
Chip Pan & Disposal Drawer
7-1/2 HP 1730 RPM 220/440/3/60 Variable Speed Drive Motor |
|
We found 11 matching ads. Now displaying the remaining 11 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8302 | Power Squaring Shear (Hydraulic) |
| — |
Promecam |
GH1230A |
Good |
Sold |
Photo /
More Info. |
| 10ft x 1/2in PROMECAM HYDRAULIC SHEAR with FO Power Back Gauge: 10 FT. X 1/2" PROMECAM HYDRAULIC SHEAR
Capacity:10' x 1/2" Mild steel
3' x 5/8" Mild steel
(Center of shear)
Length of knives:122"
Distance between housings:125"
Gap:20"
Holddowns:16
Rake angle:1/32"-3/8"
Floor to top of bed:35-1/2"
S.P.M. Approx.:14-54
EQUIPPED WITH:
36" Front operated power back gauge with control & readout
Electric foot switch
Selector switch for power-off-on &
emergency stop button
Blade clearance & rake adjustment control
Pushbutton for fine adjustment
Selector switch for
continuous-single stroke
Stroke selector control & stroke
counter
Transfer balls in top of table
Knife & holddown guard
Rear parts chute
1 HP 3420 RPM 220/440/3/60
Back gauge motor
30 HP 1755 RPM 220/440/3/60
Main motor |
|
| Ad # 8294 | Power Squaring Shear (Hydraulic) |
| 1990 |
Betenbender |
6-125 |
Good |
Sold |
Photo /
More Info. |
| 10 Ga. x 6 Ft. BetenbenderHydraulic Shear: 6 FT. X 10 GA. BETENBENDER HYDRAULIC POWER SHEAR
Capacity:6' x 10 Ga. Mild Steel
Length of Knives;76"
Rake Angle:1/4"
S.P.M. Approx.:35
EQUIPPED WITH:36" Front Operated Power Back Gauge
w/Control For Forward-Reverse-
High-Low & Micrometer Readout
Palm Button For Shear
Selector Switch For Run-Jog
Power Rake Angle Adjustment With
Control For Up-Down
Hydraulic Holddown Bar
Push-Pull Button For Start-Stop
Rear Parts Chute
Hydraulic Pump
Driven by 10 HP 1725 RPM
208/230/460/3/60 Motor
|
|
| Ad # 8293 | Power Squaring Shear (Hydraulic) |
| — |
Pullmax |
US230 |
Good |
Sold |
Photo /
More Info. |
| 10ft x 1/4in PULLMAX HYDRAULIC SHEAR: 10' X 1/4" SMT-PULLMAX HYDRAULIC SHEAR
Capacity: 10' x 1/4" Mild Steel
Length of Knives:120-3/4"
Distance Between Housings:122"
Gap:10"
Rake Angle:1.7 dg.
Holddowns:19
S.P.M. Approx.:28 - 55
EQUIPPED WITH:
32" Front Operated Power Back Gauge
w/Control & Direct Reading Dial
3' Squaring Arm
(2) Stock Support Arms
Electric Foot Switch
Pushbuttons For Start - Stop
Blade Clearance Adjustment & Rake Adjustment
(2) T-Slots in Top of Bed
T-Slot in Front of Bed
Production Counter
Hydraulic Power Unit Driven By
20 HP 1760 RPM 230/460/3/60 Motor |
|
| Ad # 8292 | Power Squaring Shear (Hydraulic) |
| 74? |
Pexto |
PH52 |
Good |
Sold |
Photo /
More Info. |
| 52in x 16 GA. PEXTO HYDRAULIC METAL SHEAR: 52" X 16 GA. PEXTO HYDRAULIC METAL SHEAR
Capacities:52" x 16 Ga. Mild Steel
52" x 20 Ga. Stainless Steel
Length of Knives: 53.5"
Oil Reservoir Capacity:5 Gallons
Floor to Top of Bed:32"
S.P.M. Approx.:45 @ Full Length
100 @ 1/4 Length
EQUIPPED WITH:
Electric Foot Switch
(2) Stock Support Arms
Pushbuttons For Start - Stop
Stroke Length Adjustment
(2) T-Slots in Top of Bed
Vickers Hydraulic Pump
Driven by 3 HP 1755 RPM
230/460/3/60 Motor
|
|
| Ad # 8301 | Power Squaring Shear (Hydraulic) |
| — |
Hercules |
37504 |
Good |
Sold |
Photo /
More Info. |
| 4ft x 3/8in HERCULES HYDRAULIC SHEAR with Manual Back Gauge: 4 FT. x 3/8" HERCULES HYDRAULIC SHEAR
Capacity:4' x 3/8" Mild Steel
Length Of Knives:52"
Rake Angle:3/8"
Holddowns:5 (Hydraulic)
Speeds Approx:18 SPM - Full Width
27 SPM - Half Width
Equipped With:
366" Rear Operated Manual Back Gauge
With Position Indicator Via Hand Crank
Electric Foot Switch
Pushbuttons For Start-Stop
Selector Switch For Hold-Run
Blade Clearance Adjustment
Finger Safety guard
Hydraulic Pump Driven By
20 HP 1750 RPM 230/460/3/60 Motor |
|
| Ad # 8296 | Power Squaring Shear (Hydraulic) |
| — |
DREIS AND KRUMP |
10ft x 10 ga |
Good |
Sold! |
Photo /
More Info. |
| 10 ft x 10 ga Dreis and Krump Hydraulic Shear: 10 FT. X 10 GAUGE DREIS AND KRUMP HYDRAULIC SHEAR
Capacity:10' x 10 Ga. Mild Steel
Length Of Knives:122"
Distance Between Housings: 131-1/2"
Gap:2-1/2"
Rake Angle:1/8"-5/16" (Variable)
Holddowns:17
S.P.M. Approx:60/33-Min/Max Rake W/ Full Length Cut
92/72-Min/Max Rake W/ 24" Length Cut
Floor To Top Of Bed:32"
EQUIPPED WITH:
36" Front Operated Power Back Gauge With Direct Reading Dial & Positive Lock
10' Squaring Arm
Electric Foot Switch
Variable Rake Control
Stroke Length Control
Key Selector Switch For
S.S. Multi Stroke
Pushbuttons For Start-Stop
Blade Clearance Adjustment
Extra Set Of Blades
(4) T-Slots In Top Of Bed
T-Slot In Front Of Bed
1/4 HP 220/380/50 Back Gauge Motor
Hydraulic Power Unit Driven By
7-1/2 HP 1430 RPM 220/380/440/50 Cycle Motor |
|
| Ad # 8295 | Power Squaring Shear (Hydraulic) |
| 1977 |
LVD |
MV-8UH 14 |
Good |
sold |
Photo /
More Info. |
| 10 Ga. x 8 Ft. LVD Hydraulic Shear: 8 FT. X 10 GAUGE LVD HYDRAULIC SHEAR
Capacity:8' x 10 Ga. Mild Steel
Length Of Knives:100-1/4"
Distance Between Housings:104"
Rake Angle:1/2"-1-1/4"
Blade Clearance Adjustment:.002" - .008"
S.P.M. Approx:26-75
Floor To Top Of Bed:34"
Equipped With:40" Front Operated Power Back Gauge
With Direct Reading Dial
(2) Stock Support Arms
Electric Foot Switch
Rake Angle Adjustment With Position
Indicator
Blade Gap Adjustment
Key Selector Switch For Start &
Pushbutton For Stop
Fixed Finger Guard
.033 HP 1720 RPM 230/460/3/60
Back Gauge Motor
Hydraulic Pump Driven By
12 HP 1740 RPM 230/460/3/60 Motor
|
|
| Ad # 8303 | Power Squaring Shear (Hydraulic) |
| — |
Cincinnati |
5FL12 |
Good |
Sold |
Photo /
More Info. |
| 12ft x 5/8inCINCINNATI HYDRAULIC METAL SHEAR: 12 FT. X 5/8" CINCINNATI HYDRAULIC METAL SHEAR
Capacities:
12' x 5/8" Mild Steel - Nominal
12' x 3/4" @ 11/16" Rake Increased
Length of Knives:124"
Distance Between Housings:12'3"
Gap:18"
Rake Angle:1/2"
Holddowns:15
Distance Under Holddowns:1-1/2"
Holddown to Knife Edge:15/16"
Floor to Top of Bed:32"
Speeds Approx.:135"/Minute - Full Load Down
290"/Minute - Up
S.P.M. Approx.: 12 @ Full Length
33 @ 24" Length
EQUIPPED WITH:
36" Front Operated Power Back Gauge w/Pushbuttons For Fine Adjustment
Forward - Rapid Traverse Forward -
Backward & Direct Reading Dial
10' Squaring Arm
(2) Stock Support Arms
Electric Foot Switch
Pushbuttons For Start - Stop &
Ram Stop
Selector Switch For Inch - Single -
Continuous
Rake Angle Adjustment
Stroke Length Adjustment
Extra Set of Blades
Automatic Oil Lubrication
Shadow Light Beam Shearing
(4) Dovetail Slots in Top of Bed
Dovetail Slot in Front of Bed
Rear Parts Chute
1/2 HP 1550 RPM 240/480/3/60 Back
Gauge Motor
Hydraulic Pump Driven by
40 HP 1780 RPM 230/460/3/60 Motor
|
|
| Ad # 8299 | Power Squaring Shear (Hydraulic) |
| 1990 |
LVD |
JS25/10 |
Good |
Sold |
Photo /
More Info. |
| 10ft x 1/4in LVD HYDRAULIC SHEAR: USED 10 FT. X 1/4" LVD HYDRAULIC SHEAR
Capacity: 10' x 1/4" Mild Steel
Length of Knives: 10'4"
Distance Between Housings:130"
Rake Angle:1/2" - 2-1/2"
Blade Clearance Adjustment: 002" - .024"
S.P.M. Approx.:15 - 60
Floor to Top of Bed:31"
EQUIPPED WITH:
40" Front Operated Power Back Gauge
w/Control & Direct Reading Dial
40" Squaring Arm
Electric Foot Switch
Pushbuttons For Start - Stop
Power Rake Angle Adjustment
Fixed Finger Guard
1/2 HP 1800 RPM 295/3/60 Back Gauge Motor
12 HP 1750 RPM 230/460/3/60 Motor |
|
| Ad # 8298 | Power Squaring Shear (Hydraulic) |
| — |
HTC |
250-10A |
Good |
sold |
Photo /
More Info. |
| 10ft x 1/4in HTC HYDRAULIC SHEAR: 10 FT. X 1/4" HTC HYDRAULIC SHEAR
Capacity: 10'4" x 1/4" Mild Steel
Length of Knives:10'4"
Distance Between Housings:10'4"
Rake Angle:11/32"
Holddowns:9 (Hydraulic)
Floor to Top of Bed:32"
S.P.M. Approx.:23 Full Width Cut
38 Half Width Cut
Speeds Approx.:220"/Min. - Down
293"/Min. - Up
EQUIPPED WITH:
36" Front Operated Power Back Gauge
w/Selector Switch For Fast In -
Fast Out & Pushbutton For Slow In
Electric Foot Switch
Pushbuttons For Start - Stop
Extra Set of Blades
(2) T-Slots in Top of Bed
Hydraulic Pump
Driven by 25 HP 1750 RPM
230/460/3/60 Motor |
|
| Ad # 8300 | Power Squaring Shear (Hydraulic) |
| — |
Niagara |
IF-10-1/4 |
Good |
Sold |
Photo /
More Info. |
| 10 ft x 1/4in NIAGARA UNDERDRIVEN HYDRAULIC METAL SHEAR: USED 10 FT. X 1/4" NIAGARA HYDRAULIC METAL SHEAR
Underdriven
Capacity:10' x 1/4" Mild Steel
Length of Knives:10' 2-1/2"
Rake Angle:3/8"
Holddowns:13
Speeds Approx.:24 SPM - Full Stroke
60 SPM - Short Stroke
Floor to Top of Bed:32"
EQUIPPED WITH:
36" Front Operated Power Back Gauge
w/Pushbutton Controls & Readout
(2) Stock Support Arms
Key Selector Switch For Single Stroke -
Inch - Continuous
Electric Foot Switch
Pushbuttons For Start - Stop
Stroke Length Control
Pushbutton For Rake Adjustment
Extra Set of Blades
1-Shot Oil Lubrication
(4) Dovetail Slots in Top of Bed
Dovetail Slot in Front of Bed
Hydraulic Pump Driven by
15 HP 1800 RPM 230/460/3/60 Motor
extra blades included
|
|
We found 16 matching ads. Now displaying the remaining 16 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5960 | Press Brakes (Mechanical) |
| — |
Dreis & Krump |
610D |
Good |
sold |
Photo /
More Info. |
| 10' x 3/8" 375 TON DREIS & KRUMP PRESS BRAKE: Air Actuated Mechanical Clutch
Bending Capacities:
12' x 5/16" Mild Steel
10' x 3/8" Mild Steel
8' x 7/16" Mild Steel
6' x 9/16" Mild Steel
Tonnage Capacity:
250 Tons @ Mid-Stroke
375 Tons Near Bottom
Overall Length of Bed & Ram:12'6"
Distance Between Housings:10'6"
Stroke: 4"
Ram Adjustment: 6" (Powered)
Shut Height S.D.A.U.: 12"
Throat Depth: 8"
Width of Bed: 5.5"
Floor to Top of Bed: 36"
S.P.M. Approx.: 25
EQUIPPED WITH:
Dual Palm Buttons For Run w/Emergency Stop Button
2.75" High Die Rail
Key Selector Switch for Inch-Off-Single-Continuous
Pushbuttons For Start - Stop Power Ram Adjustment w/Controls
Automatic Oil Lubrication
Sectional Ram Die Clamps
Dovetail Slots in Front & Back of Bed
2 HP 1710 RPM 220/440/3/60 Ram
Adjustment Motor
20 HP 1645 RPM 220/440/3/60 Main Motor
|
|
| Ad # 8282 | Press Brakes (Hydraulic) |
| 1982 |
Darley |
EHP.110.31/25 |
Good |
sold |
Photo /
More Info. |
| 121 Ton x 10 ft Darley Hydraulic Press Brake: USED 10 FT. X 3/16" DARLEY HYDRAULIC PRESS BRAKE
Capacity: 121 tons
Bending Capacities:
122" x 3/16" Mild Steel
8' x 1/4" Mild Steel
Overall Length of Bed & Ram:122"
Distance Between Housings:100.3"
Stroke:5.9"
Open Height:14.7"
Closed Height:4.8"
throat Depth:9.8"
Width of Bed:6.25"
Floor to Top of Bed:35.5"
Speeds Approx.:3.9"/Second - Approach
.30"/Second - Press
2.5"/Second - Return
EQUIPPED WITH:
5.5" High Die Rail
Free Standing Control w/Dual Palm
Buttons For Run - Emergency Stop Button
Electric Foot Switch
Pushbuttons For Start - Stop
Sectional Ram Die Clamps
T-Slots in Front - Back & Top of Bed
Hydraulic Power Unit
Driven by 10 HP Motor
|
|
| Ad # 8279 | Press Brakes (Hydraulic) |
| — |
HTC |
200G |
Good |
Sold |
Photo /
More Info. |
| 200 Ton HTC, 12 ft HTC Hydraulic Press Brake: USED 12 FT. X 1/4" HTC HYDRAULIC BRAKEModel No. 200G
Bending capacity:12' x 1/4" mild steel
Tonnage capacity:200 tons
Overall length of bed & ram:12'
Distance between housings:10'5"
Stroke:7"
Open height:12-1/2"
Closed height:5-1/2"
Throat depth: 8"
Width of bed:5-5/16"
Speeds approx.:1"/Sec. - approach
.5"/Sec. - Press
1-1/4"/Sec. - return
EQUIPPED WITH:
36" Front operated manual micrometer
back gauge with vertical adjustment
Dual pushbuttons for operation
with emergency stop button
3-1/4" High die rail
Micrometer depth stop
Hydraulic pressure gauge
Bed & ram machined for angle-
front & back
Selector switch for normal-hold
Sectional ram die clamps
Pressure gauge
Hydraulic pump driven by
20 HP 1750 RPM 230/460/3/60 Motor
|
|
| Ad # 8289 | Press Brakes (Hydraulic) |
| — |
Rousselle |
POL 5025 |
Good |
sold |
Photo /
More Info. |
| 55 Ton x 10 ft Rousselle Hydraulic Press Brake: USED 10' x 14 GAUGE ROUSSELLE HYDRAULIC BRAKE
Tonnage Capacity:55 Tons
Bending Capacities:
10' x 14 Ga. Mild Steel
8' x 12 Ga. Mild Steel
Overall Length Of Bed & Ram:10'
Distance Between Housings:100"
Stroke:4"
Open Height:10"
Closed Height:6"
Throat Depth:9"
Width Of Bed:5-1/4"
Floor To Top Of Bed:32-3/4"
Speeds Approx: 2"/Sec. - Approach
.4"/Sec. - Press
3"/Sec. - Return
EQUIPPED WITH:
Electric Foot Switch
2-3/4" High Four Way Die Rail
Key Selector Switch For Manual-Off-
Auto & Emergency Stop Button
Stroke Length Adjustment
Pushbutton For Upstroke
Sectional Ram Die Clamps
Dovetail Slots In Front & Back
Of Bed
Hydraulic Pump Driven By 5.5 HP
1700 RPM 220/440/3/60 Motor
|
|
| Ad # 8290 | Press Brakes (Hydraulic) |
| 85 ?? |
Donewell |
H55-2500 |
Good |
Sold |
Photo /
More Info. |
| 55 Ton x 8 ft Hydraulic Press Brake with CNC Back Gauge: USED 6 FT. X 10 GA. DONEWELL HYDRAULIC CNC PRESS BRAKE
Capacity: 55 tons
Bending capacities:
8' x 12 ga. mild steel
6' x 10 ga. mild steel
4' x 3/16" mild steel
Overall length of bed & ram:98"
Distance between housings:80"
Stroke:4"
Open height:12-1/2"
Closed height:8-1/2"
Throat depth:10"
Width of bed:4"
Floor to top of bed:35"
Speeds approx.:4"/Sec. - approach
3/8"/Sec. - bend
2"/Sec. - return
EQUIPPED WITH:
24" Donewell model "CNC3300 PS" two axis programmable back gauge with control
Free standing control with dual
Palm buttons for run & emergency
Stop button
1" High die rail
Pushbuttons for start-stop
Sectional ram die clamps
Hydraulic pump driven by 5-1/2" HP motor |
|
| Ad # 8280 | Press Brakes (Hydraulic) |
| 1993 |
Atlantic |
HD165X10 |
Good |
Sold |
Photo /
More Info. |
| 165 Ton x 10 ft Atlantic Hydraulic Press Brake: USED 10 FT. X 1/4" ATLANTIC HYDRAULIC PRESS BRAKE
Tonnage Capacity:165 Tons
Bending Capacities:10' x 1/4" Mild Steel
8' x 5/16" Mild Steel
Overall Length of Bed & Ram:10'2"
Distance Between Housings:98"
Stroke:6"
Open Height:16.25"
Closed Height:10.25"
Throat Depth:9-3/4"
Width of Bed:3-1/8"
Floor to Top of Bed:34"
S.P.M. Approx.:150"/Minute Rapid Approach
15"/Minute Press
165"/Minute Rapid Return
EQUIPPED WITH:
32" Pendant Operated Power Back Gauge With Control & Hand Wheel For Fine Positioning With Readout
3-1/2" High Two Die Rails
Electric Foot Switch
Ram Depth Pendant Control With Readout
Ram Adjustment Control
*Triad Safety Light Control
Pushbuttons For Start - Stop
Tonnage Control & Pressure Gauge
Sectional Ram Die Clamps
20 HP 220/440/3/60 Motor
|
|
| Ad # 8287 | Press Brakes (Hydraulic) |
| 70's? |
Pacific |
J-75 |
Good |
sold |
Photo /
More Info. |
| 75 Tons x 10 ft Pacific Hydraulic Press Brake: USED 10 FT. X 12 GA. PACIFIC HYDRAULIC PRESS
Tonnage Capacity:75 Tons
Bending Capacities:11' x 12 Ga. Mild Steel
8' x 10 Ga. Mild Steel
6' x 3/16" Mild Steel
Overall Length of Bed & Ram:12'
Distance Between Housings:10'2 3/4"
Stroke:7"
Open Height:13"
Closed Height:6"
Throat Depth:12"
Width of Bed:5-1/2"
Floor to Top of Bed:33"
Speeds Approx.:
178"/Min. Rapid Advance
79"/Min. Normal Press
12"/Min. Anti Whip
142"/Min. Rapid Return
EQUIPPED WITH:
Electric Foot Switch
Selector Switch For Single Cont.
Stroke Length Adjustment
Ram Tilt Adjustment
Sectional Ram Die Clamps
Pushbuttons For Start Stop
T Slots in Front & Back of Bed
Hydraulic Power Unit Driven by
15 HP 1455 RPM 425/3/50 Motor |
|
| Ad # 8283 | Press Brakes (Hydraulic) |
| 1993 |
Atlantic |
HD165X10 |
Good |
sold |
Photo /
More Info. |
| 165 Tons x 10 ft Atlantic Hydraulic Press Brake: Tonnage Capacity:165 Tons
Bending Capacities:
10' x 1/4" Mild Steel
8' x 5/16" Mild Steel
Overall Length of Bed & Ram:10'2"
Distance Between Housings:98"
Stroke:6"
Open Height:16.25"
Closed Height:10.25"
Throat Depth:9-3/4"
Width of Bed:3-1/8"
Floor to Top of Bed:34"
S.P.M. Approx.:150"/Minute Rapid Approach
15"/Minute Press
165"/Minute Rapid Return
EQUIPPED WITH:
32" Pendant Operated Power Back Gauge
With Control & Hand Wheel For
Fine Positioning With Readout
3-1/2" High Two Die Rails
Electric Foot Switch
Ram Depth Pendant Control With
Readout
Ram Adjustment Control
*Triad Safety Light Control
Pushbuttons For Start - Stop
Tonnage Control & Pressure Gauge
Sectional Ram Die Clamps
20 HP 220/440/3/60 Motor
|
|
| Ad # 8291 | Press Brakes (Hydraulic) |
| — |
Ajial |
502 M |
Good |
sold |
Photo /
More Info. |
| 50 Ton x 7 ft Hydraulic Press Brake: 7 FT. X 12 GA. AJIAL HYDRAULIC PRESS BRAKE
Tonnage Capacity:50 Tons
Bending Capacity:7" x 12 GA Mild Steel
Overall Length of Bed & Ram:84"
Distance Between Housings:80"
Stroke:3.9"
Open Height:11.8"
Throat Depth:15.7"
Width of Bed:3.9"
Floor To Top Of Bed:32 3/4"
Speeds Approx:1.9"/Sec. - Approach
.29"/Sec. - Press
1.8"/Sec. - Return
Equipped With:
Electric Foot Switch
3" High Die Rail
Sectional Ram Die Clamps
Selector Switch For Start - Stop
Speed Adjustment Control
Tonnage Control With Pressure Gauge
Emergency Stop Button
Hydraulic Pump Driven By
5 1/2 HP 1700 RPM 440/3/60 Motor
|
|
| Ad # 8288 | Press Brakes (Mechanical) |
| 1980 |
Diacro |
75-6 |
Good |
Sold |
Photo /
More Info. |
| 75 Tons x 6 ft Diacro hydro-Mechnical Press Brake: USED 6 FT. X 10 GA. DIACRO HYDRA-MECHANICAL PRESS BRAKE with Diacro Select-... |
|
| Ad # 8281 | Press Brakes (Hydraulic) |
| 1987 |
LVD |
150-JS-10 |
Good |
Sold |
Photo /
More Info. |
| 150 Ton, 10' LVD Hydraulic Brake, with CNC Back Gauge: Bending Capacities:
10' x 3/16" Mild Steel
8' x 1/4" Mild Steel
Tonnage Capacity:150
Overall Length Of Bed & Ram:10'
Distance Between Housings:8'4"
Stroke:5.1"
Ram Adjustment:4.3"
Open Height:12.2"
Throat Depth:7.8"
Width Of Bed:7"
Floor To Top Of Bed:36"
Speeds Approx:236"/Min. - Approach
22"/Min. Pressing
184"/Min. - Return
Equipped With:
24" Hurco Autobend 5C Programmable Gauge With Vertical Adjustment
Free Standing Control With Dual
Palm Buttons; Foot Switch &
Emergency Stop Button
Power Ram Adjustment With
Pushbutton Control
3" High Die Rail
Pushbuttons For Start-Stop
Depth Setting Readout
Adjustable Tonnage Control
Sectional Ram Die Clamps
1/2 HP 1700 RPM 460/3/60
Ram Adj. Motor
Hydraulic Pump Driven By
12 HP 1740 RPM 230/460/3/60 Motor
|
|
| Ad # 8286 | Press Brakes (Hydraulic) |
| 1993 |
Betenbender |
6ft x 95 Ton |
Good |
Sold |
Photo /
More Info. |
| 95 Ton x 6 ft Betenbender Hydraulic Brake: Tonnage Capacity:95 Tons
Bending Capacities:6' x 3/16" Mild Steel
5' x 1/4" Mild Steel
Overall length of Bed & Ram:72-1/2"
Distance Between Housings:60-1/2"
Stroke:8"
Open Height:14"
Closed height:6"
throat Depth:8"
Width of Bed:4"
Floor to Top of Bed:37"
Speeds Approx.:50"/Min. - Press
114"/Min. - Rapid Approach
168"/Min. - Return
EQUIPPED WITH:
24" Front Operated Manual Back
Gauge w/Readout Via Hand Wheel
Bed Machined For Angles - Front & Back
3-1/4" High 4-Way Die Rail
Free Standing Control w/Electric
Foot Switch & Emergency Stop Button
Selector Switch for Run - Jog;
Push - Pull Button For Start - Stop
Pushbutton For Up - Down
Tonnage Indicator
Hand Wheel Control For Depth of
Bed Adjustment
Sectional Ram Die Clamps
Hydraulic Pump Driven by
20 HP 1760 RPM 230/460/3/60 Motor
|
|
| Ad # 8274 | Press Brakes (Hydraulic) |
| — |
PACIFIC |
200-12 |
Good |
Sold |
Photo /
More Info. |
| 200 Ton Pacific, 12' OA, 10'5" BH, 10' x 1/4" Hydraulic Shear: Bending Capacities:
10' x 1/4" Mild Steel
8' x 5/16" Mild Steel
6' x 3/8" Mild Steel
Tonnage Capacity: 200 Tons
Overall Length Of Bed & Ram: 12'
Distance Between Housings: 10'5"
Stroke: 12"
Open Height: 17"
Closed Height: 5"
Throat Depth: 8"
Width Of Bed: 8"
Floor To Top Of Bed: 51"
Speeds Approx:
31"/Min. Normal Press
62"/Min. Return
Equipped With:
Electric Foot Switch
4" High Four Way Die Rail
Pushbuttons For Start-Stop
Stroke Length & Tilt Adjustment
Micrometer Depth Stop
Sectional Ram Die Clamps
Dovetail Slots In Front & Back Of Bed
Hydraulic Pump Driven By 25 HP 1800 RPM 220/440/3/60 Motor
|
|
| Ad # 4544 | Press Brakes (Hydraulic) |
| ???? |
Pacific |
J-70 |
Very Good |
Sold |
Photo /
More Info. |
| 70 TON 10 FT. X 12 GA. PACIFIC HYDRAULIC PRESS BRAK: 70 Ton, Pacific hyd., 10' OA, 8'4" BH, 10' x 12 ga.
Bending Capacities: 10' x 12 Ga. Mild Steel
6' x 10 Ga. Mild Steel
Tonnage Capacity: 70 Tons
Overall Length of Bed & Ram:10'
Distance Between Housings:8'3-1/2"
Stroke: 7"
Open Height: 14"
Closed Height: 7"
Throat Depth: 6"
Width of Bed: 3-1/4"
Floor to Top of Bed: 32"
Speeds Approx.: 105"/Min. Advance
45"/Min. Press
105"/Min. Return
EQUIPPED WITH: 3" High Die Rail
Dual Electric Foot Switches
Pushbutton For Start - Stop
Stroke Length & Ram Tilt Adj.
Sectional Ram Die Clamps
Toggle Switch For Cycle - Inch -
Off - On
Vickers Hydraulic Pump
Driven by 15 HP 1455 RPM
380/3/50 Motor |
|
| Ad # 7183 | Straight Apron Brakes |
| — |
DREIS & KRUMP |
616 |
Very Good |
Sold |
Photo /
More Info. |
| 6' x 16 ga. DREIS & KRUMP APRON BRAKE: Capacity: 6' x 16 Ga. Mild Steel
Bending Length: 6'1"
Work Height: 34"
EQUIPPED WITH:
Quick Clamping Adjustment
Removable Bending Leaf Bar
Adjusting Stop For Repetitive Work
Counter Weights |
|
| Ad # 9153 | Press Brakes (Hydraulic) |
| — |
Dries & Krump |
150P10 Pacemaker |
Good |
Sold |
Photo /
More Info. |
| 12ft overall, 126 between housings x 3/16 ...150 ton: 12 FT. X 3/16" 150 Ton
DREIS & KRUMP HYDRAULIC PRESS BRAKE
Model no. 150P10 Pacemaker
Bending capacities: 12' x 3/16" mild steel
8' x 1/4" mild steel
5' x 3/8" mild steel
Tonnage capacity: 150 tons
Overall length of bed & ram: 12'
Distance between housings: 126"
Stroke: 8"
Ram adjustment: 6"
Shut height S.D.A.U.: 12"
Throat depth: 8"
Width of bed: 6"
Floor to top of bed: 35"
Speeds approx: 322"/minute - advance
41"/minute - press
230"/minute - return
EQUIPPED WITH: 24" front operated manual back gauge
via hand lever with readout and
vertical adjustment
5-1/2" high die rail
Electric foot switch
Dual palm buttons for run
Emergency stop button
Stroke length adjustment
Power ram adjustment with pu Pushbuttons for start - stop
Key selector switches for forward -
reverse; hi - stop - lo use bypass
Sectional ram die clamps
Bijur one shot oil lubrication
1/2 HP 1725 RPM 230/460/3/60 ram
adjustment motor
Hydraulic pump driven by
25 HP 1800 RPM 230/460/3/60 motor
Weight approx. 22,200#
Overall dimensions approx. 146" L-R x 62" F-B X 118" H
|
|
We found 7 matching ads. Now displaying the remaining 7 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8315 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| — |
Pexto |
2418E |
Good |
sold |
Photo /
More Info. |
| 4ft x 16-18 GAUGE PEXTO PLATE BENDING ROLL: USED 4' x 16-18 GAUGE PEXTO PLATE BENDING ROLL
Initial Type
Capacity:4' x 16-18 Ga. Mild Steel
Roll Diameter:3"
Roll Length:49"
Pass Line:43"
Speeds Approx:26 RPM
Equipped With:
Manual Drop End w/Hand Lever to Raise
Top Roll
Manual Rear Roll & Bottom Roll
Adjustment
Pushbuttons For Start - Stop
Longitudinal & Circular Grooves In
Rear Roll
Circular Grooves in Bottom Roll
Full Length Emergency Stop Treadle
.55 HP 1130 RPM 220/440/3/60 Motor
|
|
| Ad # 8313 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| — |
WYSONG |
B-48 |
Good |
Sold |
Photo /
More Info. |
| 4ft x 12-14 GAUGE WYSONG PLATE BENDING ROLL, Initial Pinch: USED 4 FT. x 12-14 GAUGE WYSONG PLATE BENDING ROLL
Initial Type
Capacity:4' x 12-14 Ga. Mild Steel
Roll Diameter:4-1/4"
Roll Length:50"
Pass Line:28"
Speeds Approx:18 FPM
Equipped With:
Manual Drop End w/Automatic Balance Bar
Manual Rear Roll Adjustment Via
Handwheel
Manual Bottom Roll Adjustment
Pushbuttons for Forward-Reverse- Stop
Full Length Emergency Stop Treadle
Longitudinal & Circular Grooves In
Rear & Bottom Rolls
1-1/2 HP 1800 RPM 220/440/3/60 Motor
|
|
| Ad # 8312 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| — |
Hendley & Whittemore |
2-D |
Good |
Sold |
Photo /
More Info. |
| 5ft x 11 GAUGE PLATE BENDING ROLL, INITIAL PINCH: USED 5 FT. x 11 GAUGE HENDLEY & WHITTEMORE PLATE BENDING ROLL
Initial Type
Capacity:5' x 11 Ga. Mild Steel
Roll Length:62"
Roll Diameter:4-3/4"
Pass Line:34"
Equipped With:
Manual Drop End With Lever To Raise
Top Roll
Manual Bottom Roll Adjustment Via
Hand Wheels
Manual Rear Roll Adjustment Via
Hand Lever
Pushbuttons For Forward-Reverse-Stop
Full Length Emergency Stop Treadle
5 HP 1800 RPM 220/440/3/60 Motor
|
|
| Ad # 8310 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| — |
Montgomery |
16862H |
Good |
sold |
Photo /
More Info. |
| 14ft x 5/8in MONTGOMERY PLATE BENDING ROLL, INITIAL PINCH: USED 14 FT. X 5/8" MONTGOMERY PLATE BENDING ROLL
Hydraulic
Initial Type
Capacity:4' x 5/8" Mild Steel
Roll Length:14'2"
Roll Diameter:17"
Pass Line:35"
Equipped With:
Hydraulic Drop End With Control
Freestanding Control For Operation
With Pushbuttons For Up-Down;
Open-Close & Toggle Switch For
Forward-Reverse
Emergency Stop Button
Hydraulic Adjustment Of Rolls With Control Centralized Oil Lubrication
Totally Enclosed Drive
Hydraulic Pump Driven By
50 HP 460 Volts 3 PH Motor
|
|
| Ad # 8314 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| — |
Rolshear |
PR4-36 |
Good |
Sold |
Photo /
More Info. |
| 3ft x 10 GAUGE ROLSHEAR PLATE BENDING ROLL, Initial Type: SED 3 FT. X 10 GAUGE ROLSHEAR PLATE BENDING ROLL
Initial Type
Capacity:3' x 10 Ga. Mild Steel
Roll Length:37-1/2"
Roll Diameter:4-1/4"
Pass Line:34"
Speeds Approximately:18 RPM
Equipped With:
Air Drop End With Control
Pushbuttons For Forward-Reverse- Stop
Key Selector Switch For Run-Safe- Jog
*Link-Lite Safety Curtain
Full Length Emergency Stop Treadle
Front & Back
Manual Bottom & Rear Roll Adjustment
2 HP 1725 RPM 230/460/3/60 Motor
|
|
| Ad # 8311 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| — |
Bertsch |
7 |
Good |
sold |
Photo /
More Info. |
| 10ft x 3/16in BERTSCH PLATE BENDING ROLL: USED 10 FT. X 3/16" BERTSCH PLATE BENDING ROLL
Initial Type
3-Roll Gear Drive
Capacity:
10' x 3/16" Mild Steel
10' x 10 Ga. Stainless Steel
Roll Length:10'4"
Roll Diameter:7-1/2"
Pass Line:30"
Speeds Approx.;20 FPM
EQUIPPED WITH:
Air Drop End w/Control & Automatic
Balance Bar
Power Rear Roll Adjustment With
Pushbutton Control
Manual Bottom Roll Adjustment With
Position Indicators
Drum Switch For Forward-Off-Reverse
Full Length Emergency Stop Bar
Pushbuttons For Start - Stop
Longitudinal Grooves in Rear & Bottom Rolls
3 HP 1155 RPM 3/60 Rear Roll
Adjustment Motor
7-1/2 HP 1130 RPM 3 Phase 60 Cycle
Main Motor
Overall Dimensions: Pit Required)
|
|
| Ad # 9152 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| — |
Steco |
IP4 |
Good |
sold |
Photo /
More Info. |
| 6 ft x 1/4inch capacity: 6' x 1/4" STECO PLATE BENDING ROLL
IP4 Type; Initial type
Capacity: 6' x 1/4" mild steel
Roll length: 73"
Roll diameter: 7-1/2"
Pass line: 32"
EQUIPPED WITH: Manual drop end with hand crank to
raise top roll
Power rear roll adjustment with
control
Manual bottom roll adjustment
Pushbuttons for forward-reverse-off
Full length emergency stop treadle
front & back
2 HP 1440 RPM 380/420/3/50
Rear roll adjustment motor
7-1/2 HP 940 RPM 380/420/3/50
Main motor
Weight approx. 6200#
Overall dimensions approx. 129" L-R x 47" F-B x 46" H
Serial No. N/A
|
|
We found 7 matching ads. Now displaying the remaining 7 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8377 | Swagers |
| — |
Abbey Etna |
Mdl 1512 |
Good |
sold |
Photo /
More Info. |
| 1-1/2in Abbey Etner 1512, 2-Die Swager: USED ABBEY ETNA SWAGER, 2-Die Type
Capacity:
Tubing:1-1/2" Mild Steel
Solids:3/4" Mild Steel
Die Length:12"
Die Width:2-1/2"
Die Thickness:1-5/8"
Hammer Thickness:2-3/8"
Height to Spindle Centerline:38"
Spindle Speed Approx.:200
EQUIPPED WITH:
Approx. 24" Stroke Hydraulic Feed
Pushbuttons For Start - Stop
1-Set of Dies
7-1/2 HP 1150 RPM 220/440/3/60 Motor
|
|
| Ad # 8375 | Swagers |
| — |
Abbey Etna |
1515WD |
Good |
sold |
Photo /
More Info. |
| 1-1/2 in ABBEY ETNA 2-DIE SWAGER: USED ABBEY ETNA SWAGER, 2-Die Type
Capacities:
1-1/2" Tubing - Mild Steel
3/4" Dia. Solid - Mild Steel
Die Width:3"
Die Thickness:1-5/8"
Die Length:15"
Diameter of Rolls:1-31/32"
Number of Rolls:16
Height to Spindle Centerline:40"
Spindle Speeds Approx.:200 RPM
EQUIPPED WITH:
Approx. 24" Stroke Hydraulic Feed
w/Air Actuated Clamps
Gusher Coolant Pump w/Control
Pushbuttons For Start - Stop
1/10 HP 3450 RPM Coolant Motor
7-1/2 HP 1800 RPM 220/440/3/60 Motor
|
|
| Ad # 8376 | Swagers |
| 1974 |
IBP Jariston |
JB18 |
Good |
sold |
Photo /
More Info. |
| 3/4 IBP JB 18, 2-DIE SWAGER: USED 3/4" IBP EQUIPMENT SWAGER, Two Die Type
Capacity:
3/4" Dia. Maximum Tube
5/64" Dia. Minimum Tube
Die Width:1 1/4"
Die Height:1"
Die Length:4"
Hammer Width:1 1/4"
Hammer Height:1"
Hammer Length:4"
Height to Spindle Centerline:36"
EQUIPPED WITH:
Selector Switch For Off On
Automatic Oil Lubrication
2 HP 1450 RPM 230/460/3/60 Motor
|
|
| Ad # 8371 | Swagers |
| 1965 |
Fenn |
8FS |
Good |
sold |
Photo /
More Info. |
| 3-3/8in FENN 4-DIE SWAGER: USED FENN SWAGER "STATIONARY DIE" - Four Die Type
Ideal for Use Where It Is Desirable to Keep Work From Rotating Such As In
Swaging Square & Symmetrical Shapes
Four Die Type
Capacity:
Solids - 3-3/8" Mild Steel
Tubing - 6" Mild Steel
Die Width:6.5"
Die Height:6"
Die Length:15"
Hammer Width:6.5"
Hammer Height:5.5"
Hammer Length:15"
Number of Rolls:12 x 21.5" Long
Inner Dia. of Rolls:23.5" (Approx.)
Diameter of Flywheel:57"
Opening Thru Spindle:7" Square
Pass Line:37.5"
EQUIPPED WITH:
Horizontal Feed System for Flats With 5" Wide Vertical Clamp (Powered)
4 Hammers - 15" Long 2 Die Blocks - For Flats - 8-1/2" Long
1/3 HP 1125 RPM 115/230/1/60 Coolant
Motor
20 HP 650-2200 RPM 240 Volt D.C. Shunt Wound Drive Motor
Feed: 46" L-R x 21" F-B x 55" H
|
|
| Ad # 8372 | Swagers |
| — |
Torrington |
438 |
Good |
sold |
Photo /
More Info. |
| 2-1/2in TORRINGTON SWAGER, 2-Die Type: USED TORRINGTON SWAGER, 2-Die Type
Capacity:
Solids:1" w/1-1/2" Die
5/8" w/3" Die
Tubing:2-1/2" Mild Steel
Largest Taper in (1) Operation:8-1/4"
Die Width:2.937"
Die Height:1.920"
Die Length:8-3/8"
Hammer Width:2.937"
Hammer Height:1.750"
Hammer Length:8-3/8"
Diameter Hole Through Spndle:2-5/16"
Height to Spindle Centerline:40"
Spindle Speed Approx.: 250 RPM
EQUIPPED WITH:
Pushbuttons For Start - Stop
(1) Set of Dies
10 HP 1750 RPM 3 Phase 60 Cycle Motor
|
|
| Ad # 8374 | Swagers |
| 1993 |
Fenn |
3F |
Good |
Sold |
Photo /
More Info. |
| 1-3/4" FENN 2-DIE TYPE SWAGER: USED FENN SWAGER, 2-Die Type
Capacity:
Solids:5/8" Mild Steel
Tubing:1-3/4" Mild Steel
Die Width:2-1/4"
Die Height:1-19/32"
Die Length:2-1/2"
Hammer Width:2-1/4"
Hammer Height:1-17/32"
Hammer Length:2-1/2"
Height to Spindle Centerline:35"
Spindle Speed Approx.:312 RPM
EQUIPPED WITH:
Pushbuttons For Start - Stop
5 HP 1725 RPM 230/460/3/60 Motor
|
|
| Ad # 8373 | Swagers |
| — |
Torrington |
433 |
Good |
sold |
Photo /
More Info. |
| 2-1/4in TORRINGTON ROTARY SWAGING MACHINE , 2-DIE TYPE: USED TORRINGTON ROTARY SWAGING MACHINE, 2-Die Type
Capacity:
Solids:5/8" Mild Steel
Tubing:2-1/4" Mild Steel
Die Width:2.687"
Die Height:1.920"
Die Length:3"
Hammer Width:2.687"
Hammer Height:1.750"
Hammer Length:3"
Height to Spindle Centerline:38"
Spindle Speed Approx.:250 RPM
EQUIPPED WITH:
Pushbuttons For Start - Stop
Motor Driven Coolant Pump & Tank
Production Counter
5 HP 1750 RPM 220/440/3/60 Motor
|
|
We found 14 matching ads. Now displaying the remaining 14 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8345 | Ironworkers |
| 1980 |
SCOTCHMAN |
7012-24 |
Good |
sold |
Photo /
More Info. |
| 70 Ton Scotchman 7012-24 Hydraulic Ironworker With Brake Attachment: USED 70 TON SCOTCHMAN HYDRAULIC IRONWORKER With Brake Attachment
Punch-Tonnage:70 Tons
Hole Capacity:1-1/16" Through 3/4" Mild Steel
1-1/4" Through 5/8" Mild Steel
Throat Depth:12"
SPM Approx.:37
Shear-Angles:6" x 6" x 1/2"
Shear-Plate:24" x 1/4" Mild Steel
8" x 3/4" Mild Steel
6" x 1" Mild Steel
Length Of Knives:24"
EQUIPPED WITH:
Joystick For Punch Section &
Shear Section
24" Long Brake Attachment
Angle Shear Attachment
Assortment of Punches & Dies
Pushbuttons For Start - Stop
Hydraulic Pump Driven By
7-1/2 HP 1740 RPM 220/440/3/60 Motor |
|
| Ad # 8341 | Ironworkers |
| — |
HTC |
IW-100 |
Good |
sold |
Photo /
More Info. |
| 100 Ton Hydraulic Ironworker: USED 100 Ton HTC Hydraulic IRONWORKER
Punch-Tonnage:100 Tons
Stroke:1-1/2"
Hole Capacity:1-1/4" x 7/8"
Throat Depth:24"
Flat Shear-Angles (90 Dg.):6" x 6" x 5/8"
Angles (45 Dg.):4" x 4" x 1/2"
Flat:24" x 1/2"
Length of Knives: 24"
Bar Shear-Rounds:2"
Squares:2"
Coper/Notcher-Coper:3-1/2" Square x 3/8" Thick
Notcher:3-1/2" x 90 Dg. - 3/8" Thick
SPM Approx:11.3 Shear Section
15.8 Punch Section
Equipped With:
Freestanding Control w/Dual
Palm Buttons for Operation -
Each End
Pushbuttons for Start-Stop & Energy
Saver
Selector Switches For Jog-Run &
Jog Up-Down; Punch-Iron Worker
Small Amount of Extra Punches & Dies
Parker Hydraulic Pump Driven By
15 HP 1760 RPM 230/460/3/60 Motor
|
|
| Ad # 8348 | Ironworkers |
| — |
Buffalo |
1/2 |
Good |
Sold |
Photo /
More Info. |
| 58 Ton Buffalo Ironworker: USED 58 TON BUFFALO IRONWORKER
Punch-Tonnage:58 Tons
Hole Capacity:1-1/16" Through 5/8"
Throat Depth:20"
SPM Approx.:44
Shear-Flats:9-3/8" x 1/4"
9" x 3/8"
8-1/8" x 1/2"
7" x 5/8"
Length Of Knives:9-3/4"
Bar Cutter-Rounds:1-5/8"
Squares:1/2" to 1-1/2"
Angles:4" x 4" x 1/2"
Notcher-Angles:3" x 3/8"
Plates:5/16"
Depth of Cut:2-3/4"
EQUIPPED WITH:
Foot Pedal For Operation
Pushbuttons For Start - Stop
Assortment of Punches & Dies
Punch & Die Holder
3 HP 1750 RPM 230/460/3/60 Motor
|
|
| Ad # 8347 | Ironworkers |
| — |
Peddinghaus |
66/110H |
Good |
Sold |
Photo /
More Info. |
| 66 Tons Peddinghaus Hydraulic Ironworker: USED 66 TON PEDDINGHAUS Hydraulic IRONWORKER
Punch-Tonnage:66 Tons
Hole Capacity:1-1/16" Through 21/32"
Stroke:9/16" - 1-3/16"
Throat Depth:20"
SPM Approx.:30
Shear-Angles:5" x 5" x 1/2"
3-1/2" x 3-1/2" x 3/8"
Flats:20" x 7/16"
16" x 5/8"
6" x 3/4"
4" x 7/8"
Length Of Knives:20"
Notcher-Plates:1/2"
Angles&Tees:3-1/2" x 3/8"
Bar Cutter-Rounds:1-3/4"
Squares:1-5/8"
EQUIPPED WITH:Electric
Foot Switch
Pushbuttons For Start - Stop
Selector Switch For Raise-Off-Lower
Emergency Stop Button
Punch & Die Holder
Pressure Gauge
Hydraulic Pump Driven By
10 HP Motor
|
|
| Ad # 8346 | Ironworkers |
| — |
Proma Omes |
CH-70 |
Good |
Sold |
Photo /
More Info. |
| 70 Ton Hydraulic Ironworker: USED 70 TON PROMA-OMES IRONWORKER
Hydraulic
Punch-Tonnage:70 Tons
Hole Capacity:1-1/8" Through 3/4" Mild Steel
Throat Depth:12"
Section Shear-Angles(90dg):5" x 5" x 1/2"
Angles(45dg):3" x 3" x 3/8"
Flats Iron:18" x 5/8"
12" x 3/4"
Length Of Knives: 18"
Bar Cutter-Rounds:1-3/4"
Squares:1-3/4"
Notcher:15/32"
EQUIPPED WITH:
Electric Foot Switch
Selector Switches For Run - Jog -
Full PSI & Low PSI
Pushbuttons For Hydraulic On - Off
Emergency Stop Button
Punch & Die Holder
Hydraulic Pump Driven By
5 HP 1800 RPM 220/440/3/60 Motor
|
|
| Ad # 8352 | Ironworkers |
| — |
Scotchman |
314 |
Good |
sold |
Photo /
More Info. |
| 35 Ton SCOTCHMAN IRONWORKER: USED 35 Ton SCOTCHMAN IRONWORKER
CAPACITIES:
Punch-Tonnage:35 Tons
Hole Capacity:1-1/4" - 1/4" Mild Steel
7/8" - 1/2" Mild Steel
Throat Depth:3-1/2"
S.P.M. Approx.:55 - Light Material
9-Maximum Capacity
Shear-Angles:3" x 3" x 1/4" Mild Steel
Flat Bar: 6" x 1/2" Mild Steel
Length of Knives:7"
EQUIPPED WITH:
Foot Switch For Operation
Pushbuttons For Start - Stop
Punch & Die Holder
Hydraulic Pump Driven by
3 HP 1755 RPM 230/460/3/60 Motor
|
|
| Ad # 8340 | Ironworkers |
| 1986 |
SCOTCHMAN |
12012 |
Good |
Sold |
Photo /
More Info. |
| 120 TON SCOTCHMAN HYDRAULIC IRONWORKER: USED 120 TON SCOTCHMAN HYDRAULIC IRONWORKER
Punch - Tonnage:120 Tons
Hole Capacity:1-1/2" In 1" Mild Steel
Throat Depth:12"
SPM Approx.:37
Shear-Angles:6" x 6" x 1/2"
Plates:24" x 1/2" Mild Steel 18" x 5/8" Mild Steel
16" x 3/4" Mild Steel
12" x 1" Mild Steel
Length of Knives:24"
EQUIPPED WITH:
Electric Foot Switch
Pushbuttons For Start - Stop
Selector Switch For Shear Section -
Punch Section
Angle Shear Attachment
Assortment Of Punches & Dies
Punch & Die Holder
Hydraulic Pump Driven By
7-1/2 HP 1800 RPM 440/3/60 Motor
|
|
| Ad # 8349 | Ironworkers |
| — |
Piranha |
P-50 |
Good |
Sold |
Photo /
More Info. |
| 50 Ton Piranha Hydraulic Ironworker With Brake Attachment: USED 50 TON PIRANHA HYDRAULIC IRONWORKER With Brake Attachment
Punch-Tonnage:50 Tons
Hole Capacity:13/16" Through 3/4" Mild Steel
Throat Depth:8"
Stroke Length:4-1/4"
Working Height:40"
Shear - Plate:14" x 5/8" Mild Steel
10" x 3/4" Mild Steel
4" x 1" Mild Steel
Angle:5" x 5" x 3/8" Mild Steel
Length Of Knives:14-1/2"
Bar Shear-Rounds:1/4" to 1-1/2"
Squares:1/2" to 1"
Coper-Notcher:4" x 2-3/4" x 1/4"
EQUIPPED WITH:
8" Press Brake Attachment
Small Assortment of Punches & Dies
Joystick Control For Operation
Both Sides
Hydraulic Pump Driven By
10 HP 1725 RPM 230/460/3/60 Motor
|
|
| Ad # 8343 | Ironworkers |
| — |
Buffalo |
1-1/2 |
Good |
sold |
Photo /
More Info. |
| 73 TON Buffalo Ironworker: USED 73 TON BUFFALO UNIVERSAL IRONWORKER
Punch-Tonnage:73 Tons
Hole Capacity:1-1/16" Through 3/4"
7/8" Through 7/8"
Throat Depth:20"
SPM Approx.:25
Shear-Plates:5/8"
Flats:6" x 3/4"
Length of Knives:12"
Coper-Angles:3" x 1/2"
Plates:1/2"
Width of Cut:2"
Depth of Cut:3"
Notcher-Angles:3" x 3/8"
Plates:3/8"
Depth of Cut:2-3/4"
Bar Cutter-Rounds:1-7/8"
Squares:1-3/4"
Angles:5" x 5" x 1/2"
EQUIPPED WITH:
Foot Pedal For Operation
Punch & Die Holder
Pushbuttons For Start-Stop
One Shot Oil Lubrication
5 HP 1800 RPM 220/440/3/60 Motor
|
|
| Ad # 8350 | Ironworkers |
| 1981 |
Scotchman |
5075 |
Good |
sold |
Photo /
More Info. |
| 50 Ton Scotchman Hydraulic Ironworker: USED 50 Ton SCOTCHMAN HYDRAULIC IRONWORKER
Punch-Tonnage:50 Tons
Hole Capacity:1-1/8"-1/2" Mild Steel
3/4" - 3/4" Mild Steel
Throat Depth:7-1/2"
SPM Approx:30
Shear-Angles:4" x 4" x 3/8" Mild Steel
Flat Bar:24" x 3/16" Mild Steel
8" x 1/2" Mild Steel
6" x 3/4" Mild Steel
Length Of Knives:25"
Notcher:6" x 6" x 5/8" Mild Steel
Equipped With:
Foot Switches For Punch And
Shear Section
Toggle Switch For On-Off
Notcher Attachment
Hand Lever For Shear Or Punch
Section
Pressure Gauge
Portable-On Wheels
Hydraulic Pump Driven By
5 HP 1740 RPM 230/460/3/60 Motor
|
|
| Ad # 8342 | Ironworkers |
| 1990 |
SCOTCHMAN |
9012-24M |
Good |
sold |
Photo /
More Info. |
| 90 Ton SCOTCHMAN 9012-24M HYDRALIC IRONWORKER: USED 90 Ton SCOTCHMAN HYDRAULIC IRONWORKER
With Press Brake Attachment
Capacities:
Punch-Tonnage:90 Tons
Hole Capacity:1-1/16" - 1" Thick-Mild Steel
Throat Depth:12"
S.P.M. Approx.:37
Shear-Angles (90dg):6" x 6" x 1/2" - Mild Steel
(45dg):4" x 4" x 1/2" - Mild Steel
Flat Bar:24" x 1/4" - Mild Steel
16" x 1/2" - Mild Steel
10" x 3/4" - Mild Steel
8" x 1" - Mild Steel
Length of Knives:24"
Bar Cutter -Rounds:1-1/4" Round - Mild Steel
Square:1" - Mild Steel
Notcher (90dg):6" x 6" x 5/16" Mild Steel
Rectangle Notcher:2" x 2-1/2" x 3/8" Mild Steel
EQUIPPED WITH:
Electric Foot Switch
Pushbuttons For Start - Stop
Selector Switch For Punch - Shear
Attachment of Rod Shear - Angle Shear -
Brakes-Notcher & Offset Die Holder
Assortment of Punches & Dies
Punch & Die Holder
Hydraulic Pump Driven by
5 HP 1800 RPM 230/460/3/60 Motor
|
|
| Ad # 8351 | Ironworkers |
| — |
Buffalo |
50 ton |
Good |
Sold |
Photo /
More Info. |
| 50 Ton Buffalo Ironworker: USED 50 Ton BUFFALO IRONWORKER
Punch-Tonnage:50 Tons
Hole Capacity:1-1/16" - 5/8" Mild Steel
Throat Depth:20"
Work Height:38
Shear-Angles(90dg):4" x 4" x 1/2"
Angles(45dg):3" x 3" x 5/16"
Shear-Plates:1/2"
Flats:6" x 5/8"
Length of Knives:10"
Bar Cutter-Rounds:1-5/8"
Square:1-1/2"
Coper:3" x 3" x 3/8"
Notcher:3" x 3" x 5/16"
SPM Approx.:30
EQUIPPED WITH:
Foot Pedals For Operation
Bijur One Shot Oil Lubrication
Pushbuttons For Start - Stop
Punch & Die Holder
3 HP 1750 RPM 230/460/3/60 Motor
|
|
| Ad # 8344 | Ironworkers |
| 1980 |
Ficep |
ST/Super14 |
— |
sold |
Photo /
More Info. |
| 72 Ton Hydraulic Ironworker: USED 72 Ton FICEP SUPER 14 IRONWORKER
Capacities:
Punch Tonnage:72 Tons
Stroke:1-1/32"
Hole Capacity:1-3/16" Thru 5/8"
1" Thru 3/4"
Throat Depth:13-1/2"
S.P.M. Approx.:74
Section Shear-Angles:5" x 5" x 1/2" (90dg)
3-1/2" x 3-1/2" x 3/8" (45dg)
Stroke:1-1/2"
Bar Cutter-Rounds:1-3/4" Round
1-9/16" Squares
Coper-Notcher-Plates:1/2"
Angles:4" x 3/8"
Width of Cut: 2-1/16"
Depth of Cut: 4"
Plate Shear-Flat Bars:7-1/2" x 5/8"
Length of Blade:10"
EQUIPPED WITH:
Pushbuttons For Start-Stop
Hand Lever For Operation
Punch & Die Holder
Small Assortment of Punches
1-Shot Oil Lubrication
Mounted on 13-1/2" High Portable
I-Beam
4 HP 440V/3/50 Motor
|
|
| Ad # 8353 | Ironworkers |
| — |
Kling |
3 |
Good |
Sold |
Photo /
More Info. |
| 33 Ton KLING HYDRAULIC IRONWORKER: USED 33 Ton KLING IRONWORKER
CAPACITIES:
Tonnage:33 Tons
Punch:11/16" Hole Thru 1/2" Plate
Shear-Plates:3/8"
Flat Bars:4" x 1/2"
Square:1-1/4"
Round:1-3/8"
Angles:4" x 4" x 1/4"
Length of Blade:9"
Coper-Angles:2-1/4" x 2-1/4" x 1/4"
Plates:1/4"
Angles-Mitre:2-1/2" x 2-1/2" x 1/4"
Tees-Square:3" x 3" x 1/4"
S.P.M. Approx.:35 @ 3/8" Length Maximum
20 @ 1" Length Minimum
EQUIPPED WITH:
Foot Pedal Operation
Punch & Die Holder
Pushbuttons For Start - Stop
2 HP 1740 RPM 220/440/3/60 Motor
|
|
We found 13 matching ads. Now displaying the remaining 13 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8327 | Hydraulic H-Frame Press |
| — |
OTC |
75 Ton |
Good |
sold |
Photo /
More Info. |
| 75 TON OTC HYDRAULIC SHOP PRESS: USED 75 TON OTC HYDRAULIC SHOP PRESS
With Roller Bed - Adjustable Bed Width
Floor Standing Type
Distance Between Side Frames:45" L-R
Distance Between Bed Channels:Adjustable
Distance Over Bed Channels:Adjustable
Stroke Of Ram:0-11" Maximum
Head Movement Side To Side:33" L-R
Daylight Opening:10"-38" Maximum (Adjustable In 7"
Increments Via Hand Winch)
Power Unit:Hand Pump With Dump Valve
Controls:Pressure Gauge
|
|
| Ad # 8317 | Hydraulic H-Frame Press |
| — |
Rodgers |
S150-13-3 |
Good |
Sold |
Photo /
More Info. |
| 150 TON RODGERS HYDRAULIC H-FRAME PRESS: USED 150 TON RODGERS HYDRAULIC H-FRAME PRESS
Floor Standing
Distance Between Side Frames:48" L-R
Distance Between Bed Channels:12.5" F-B
Distance Over Bed Channels:21" F-B
Area of bed:48" L-R x 21" F-B
Stroke of Ram:0 - 13" Maximum
Head Movement-Side to Side:33" L-R
Daylight Opening:12" - 36" Maximum (Adjustable in
12" Increments Via Hand Winch)
Main Ram Diameter:6.5"/2.625" @ 9040 PSI - 150 Tons
Power Unit:Hand Pump w/Dump Valve
Controls:Pressure Gauge
|
|
| Ad # 8324 | Hydraulic H-Frame Press |
| — |
Dake |
N/A |
Good |
Sold |
Photo /
More Info. |
| 150 TON DAKE HYDRAULIC H-FRAME PRESS: USED 150 TON DAKE HYDRAULIC H-FRAME PRESS
Floor Standing
Distance Between Side Frames:48" L-R
Distance Between Bed Channels:12.5" F-B
Distance Over Bed Channels:20.5" F-B
Area of Bed:48" L-R x 20" F-B
Stroke of Ram:0 - 16" Maximum
Head Movement - Side to Side:24.75" L-R
Daylight Opening:11" - 31" Maximum (Adjustable in
5" Increments Via Hand Winch)
Main Ram Diameter:8"/4" @ 5968 PSI - 150 Tons
Power Unit:Hydraulic Pump
Driven by 2 HP 1725 RPM
230/460/3/60 Motor
Speeds Approx.:16"/Min. Closing
2.75"/Min. Pressing to 150 Tons
Controls:Pushbutton Operation w/Stroke &
Pressure Control
Operator Hand Lever w/Dump Valve
Pressure Gauge
|
|
| Ad # 8318 | Hydraulic H-Frame Press |
| — |
Nugier |
H150MD |
Good |
Sold |
Photo /
More Info. |
| 150 TON NUGIER HYDRAULIC SHOP PRESS: USED 150 TON NUGIER HYDRAULIC SHOP PRESS
w/Die Set
Floor Standing
Distance Between Side Frames:48" L-R
Distance Between Bed Channels:16" F-B
Distance Over Bed Channels:23" F-B
Area of Bed:48" L-R x 23" F-B
Stroke of Ram:0 - 14" Maximum
Head Movement - Side to Side:30" L-R
Daylight Opening:36" Maximum (Adjustable)
Main Ram Diameter: 7"/3.5" @ 7800 PSI - 150 Tons
Power Unit:(2) Racine Hydraulic Pumps
Both Driven by 3 HP 1800 RPM
230/460/3/60 Motor
Speeds Approx.:33"/Minute Closing
3.7"/Minute Pressing to 150 Tons
40"/Minute Return
Controls:Pushbutton Operation w/Stroke &
Pressure Control
Operator Hand Lever
Pressure Gauge
|
|
| Ad # 8316 | Hydraulic H-Frame Press |
| — |
Dake |
P237 |
Good |
Sold |
Photo /
More Info. |
| 300 TON DAKE HYDRAULIC H FRAME PRESS: USED 300 TON DAKE HYDRAULIC H FRAME PRESS
Floor Standing Type
Distance Between Side Frames:54" L-R
Distance Between Bed Channels:17.5" F-B
Distance Over Bed Channels:33" F-B
Area Of Bed:50" L-R x 33" F-B
Stroke Of Ram:0-16" Maximum
Daylight Opening:10"-50" Maximum (Adjustable In 5"
Increments Via Hand Winch)
Main Ram Diameter:11.5"/9" @ 5776 PSI - 300 Tons
Power Unit:Blackhawk Model P237 Hydraulic Pump
Driven By 10 HP 1735 RPM
220/440/3/60 Motor
Controls:Pushbutton For Start-Stop
Operator Hand Lever
Pressure Gauge
|
|
| Ad # 8332 | Hydraulic H-Frame Press |
| — |
K.R. Wilson |
37CT-18 |
Good |
Sold |
Photo /
More Info. |
| 18 TON K.R. WILSON HYDRAULIC SHOP PRESS: USED 18 TON K.R. WILSON HYDRAULIC SHOP PRESS
Floor Standing
Distance Between Side Frames:32" L-R
Distance Between Bed Channels:8" F-B
Distance Over Bed Channels:14" F-B
Area of Bed:32" L-R x 14" F-B
Stroke of Ram Approx.:0 - 10" Maximum
Daylight Opening Approx.:23" Maximum
Main Ram Diameter:4"/2" @ 2866 PSI - 18 Tons
Power Unit:Hydraulic Pump
Driven by 7.5 HP 1725 RPM
230/460/3/60 Motor
Controls:Pushbutton Operation With Stroke
& Pressure Control
Dual Touch Palms
Pressure Gauge
|
|
| Ad # 8329 | Hydraulic H-Frame Press |
| — |
Dake |
75H |
Good |
Sold |
Photo /
More Info. |
| 75 TON DAKE HYDRAULIC H-FRAME PRESS: USED 75 TON DAKE HYDRAULIC H-FRAME PRESS
Floor Standing
Distance Between Side Frames:44" L-R
Distance Between Bed Channels:8.25" F-B
Distance Over Bed Channels:14.5" F-B
Area of Bed:44" L-R x 14.5" F-B
Stroke of Ram:0 - 4.5" Maximum
Ram Adjustment Screw:7"
Head Movement Side to Side:29-5/8" L-R
Daylight Opening:2" - 30" Maximum (Adjustable in
4" Increments Via Hand Winch)
Main Ram Diameter:6"/4" @ 5300 PSI - 75 Tons
Power Unit:Hand Pump w/Dump Valve
Controls:Pressure Gauge
|
|
| Ad # 8323 | Hydraulic H-Frame Press |
| 1987 |
Dake |
5-510 |
Good |
sold |
Photo /
More Info. |
| 150 TON DAKE HYDRAULIC H-FRAME PRESS: USED 150 TON DAKE HYDRAULIC H-FRAME PRESS
Floor Standing
Distance Between Side Frames:48" L-R
Distance Between Bed Channels:12.25" F-B
Distance Over Bed Channels:20.5" F-B
Area Of Bed:48" L-R x 20" F-B
Stroke Of Ram:0-16" Maximum
Head Movement Side To Side:24.75" L-R
Daylight Opening:5"-30" Maximum (Adjustable In 5'
Increments Via Hand Winch)
Main Ram Diameter:8"/4" @ 5968 PSI - 150 Tons
Power Unit:Dake Model 50-101 Hydraulic Pump
Driven by 2 HP Motor
Speeds Approx: 16"/Min. Closing
2.75"/Min. Pressing to 150 Tons
Controls:Pushbutton Operation With Stroke &
Pressure Control
Operator Hand Lever With Dump Valve
Pressure Gauge
|
|
| Ad # 8328 | Hydraulic H-Frame Press |
| — |
K.R. Wilson |
37FX |
Good |
sold |
Photo /
More Info. |
| 75 TON K.R. WILSON HYDRAULIC FLOOR STANDING SHOP PRESS: USED 75 TON K.R. WILSON HYDRAULIC SHOP PRESS
Floor Standing
Distance Between Side Frame:42: L-R
Distance Between Bed Channels:9" F-B
Distance Over Bed Channels:11" F-B
Area Of Bed:42" L-R x 11" F-B
Stroke Of Ram:0-7.5" Maximum
Daylight Opening:4"-39" Max (Adjustable In 4"
Increments Via Hand Winch)
Main Ram Diameter:6"/2-15/16" @ 5300 PSI - 75 Tons
Power Unit:Hand Pump With Dump Valve
Controls:Pressure Gauge
|
|
| Ad # 8322 | Hydraulic H-Frame Press |
| 1987 |
Dake |
5-342 |
Good |
sold |
Photo /
More Info. |
| 150 TON DAKE HYDRAULIC H-FRAME PRESS: USED 150 TON DAKE HYDRAULIC H-FRAME PRESS
Floor Standing
Distance Between Side Frames:48" L-R
Distance Between Bed Channels:12.25" F-B
Distance Over Bed Channels:20" F-B
Area Of Bed:48" L-R x 20" F-B
Stroke Of Ram:0-16" Max
Head Movement Side To Side:24.75" L-R
Daylight Opening:5"-30" Max (Adjustable In 5"
Increments Via Hand Winch)
Main Ram Diameter:8"/4" @ 5968 PSI - 150 Tons
Power Unit:Dake Hydraulic Pump Driven By
2 HP 1740 RPM 230/460/3/60 Motor
Speeds Approx:16"/Min. Closing
2.75"/Min. Pressing To 150 Tons
Controls:Pushbutton Operation With Stroke &
Pressure Control
Operator Hand Lever With Dump Valve
Pressure Gauge
|
|
| Ad # 8330 | Hydraulic H-Frame Press |
| 1995 |
Dake |
75H |
Good |
SOLD |
Photo /
More Info. |
| 75 TON DAKE HYDRAULIC SHOP PRESS: USED 75 TON DAKE HYDRAULIC SHOP PRESS
Floor Standing Type
Distance Between Side Frame:44" L-R
Distance Between Bed Channels:8.25" F-B
Distance Over Bed Channels:14.5" F-B
Area Of Bed:44" L-R x 14.5" F-B
Stroke Of Ram:0-4.5" Maximum
Ram Adjustment Screw:7"
Head Movement Side To Side:29-5/8" L-R
Daylight Opening:36" Maximum
(Adjustable Via Hand Winch)
Main Ram Diameter: 6"/4" @ 5300 PSI - 75 Tons
Power Unit:Hand Pump With Dump Valve
Controls:Pressure Gauge
|
|
| Ad # 8326 | Hydraulic H-Frame Press |
| — |
Dake |
19-214, |
Good |
sold |
Photo /
More Info. |
| 75 TON DAKE HYDRAULIC STRAIGHTENING PRESS WITH TRAVELING HEAD: USED 75 TON DAKE HYDRAULIC STRAIGHTENING PRESS
TRAVELING HEAD
Down stroke Type
Floor Standing
Distance Between Uprights:60" L R
Bed Area:38" L R x 128" F B
Bed Plate:38" L R x 84" F B
Stroke:0 - 14" Maximum
Daylight Opening Over Bed Plate: 2" - 32" Maximum
(Adj. in 5" Increments)
Traverse of Frame:52"
Traverse of Workhead:36"
Main Ram Diameter:6"/4.75" @ 5305 PSI 75 Tons
Floor to Top of Bed:40"
Power Unit:Dynex Model PF 2006 1807 Fixed
Volume Piston Pump,
4.2 GPM @ 6000 PSI
Driven by 7-1/2 HP 1760 RPM
208/220/440/3/60 Motor
Speeds Approx.:30"/Min. Closing
30"/Min. Pressing to 75 Tons
80"/Min. return
Controls:Pushbutton Operation w/Stroke Pressure Control
Weight approx. 5500# (Press); 9000# (Table)
|
|
| Ad # 8331 | Hydraulic H-Frame Press |
| — |
Dake |
150 Ton Dake |
Good |
Sold |
Photo /
More Info. |
| 75 TON DAKE HYDRAULIC H-FRAME PRESS: USED 75 TON DAKE HYDRAULIC H-FRAME PRESS
Floor Standing
Distance Between Side Frames: 44" L-R
Distance Between Bed Channels:8.25" F-B
Distance Over Bed Channels:14.5" F-B
Area of Bed:44" L-R x 14.5" F-B
Stroke of Ram:0 - 4.5" Maximum
Ram Adjustment Screw:7"
Head Movement Side to Side:29-5/8"
Daylight Opening:3" - 39" Maximum (Adjustable in
4" Increments Via Hand Winch)
Main Ram Diameter:6"/4" @ 5300 PSI - 75 Tons
Power Unit: Hand Pump w/Dump Valve
Controls:Pressure Gauge
|
|
We found 7 matching ads. Now displaying the remaining 7 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8337 | Vibratory Equipment |
| — |
Sweco |
FMD-7LR-2 |
Good |
sold |
Photo /
More Info. |
| 7 CU. FT. SWECO VIBRATORY FINISHING MILL: USED 7 CU. FT. SWECO VIBRATORY FINISHING MILL
Capacity:7 Cu. Ft.
Maximum Straight Part Length:20"
Load Capacity:2100#
Bowl Size:44" I.D. x 13" Deep
Discharge Height to Floor:24"
EQUIPPED WITH:3/4" Polyurethane Liner
Free Standing Control w/Pushbuttons For Start & Emergency Stop Selector Switch For Automatic Mill- Hand & Compound-Injector Auto.- Off-Hand Timer & Hour Gauge Removable Bowl Cover Quick Release Discharge Door 5 HP 1200 RPM 230/460/3/60 Motor
|
|
| Ad # 8334 | Vibratory Equipment |
| — |
Sweco |
FM-10-3 |
Good |
sold |
Photo /
More Info. |
| 10 CU. FT. SWECO VIBRATORY FINISHING MILL: USED 10 CU. FT. SWECO VIBRATORY FINISHING MILL
Capacity:10 Cu. Ft.
Maximum Straight Part Length:24"
Load Capacity:2500#
Bowl Size:44.75" I.D. x 13" Deep
Discharge height to Floor:58" w/37" Riser
EQUIPPED WITH:
Polyurethane Lined Bowl
Mounted on 37" Base Riser
2.5 HP 1200 RPM 220/440/3/60 Motor
|
|
| Ad # 8333 | Vibratory Equipment |
| — |
Deburring |
R-48 |
Good |
sold |
Photo /
More Info. |
| 10 CU. FT. ELECTRO DEBURRING VIBRATORY PARTS FINISHING MACHINE: USED ELECTRO DEBURRING VIBRATORY PARTS MEDIA SEPARATOR
10 CU. FT. ELECTRO DEBURRING VIBRATORY PARTS FINISHING MACHINE
Arranged For Wet - Dry Operation
Vibratory Chamber Size:4" Dia. x 48" Long x 17” Deep
Top Loading Opening:14" Wide x 48" Long x 4” High
Discharge Door:7" Wide x 5" High
Discharge Height:37" From Floor
Amplitude Range:1/64" - 3/8" (Variable)
EQUIPPED WITH:
Pushbutton For Start - Stop
Cycle Time Selector
Abrasion Resistant Tub Liner
10 HP 220/440/3/60 Motor
|
|
| Ad # 8336 | Vibratory Equipment |
| 1987 |
Ultramatic |
SVB-7 |
Good |
sold |
Photo /
More Info. |
| 7 Cu. Ft.: USED 7 CU. FT. ULTRAMATIC VIBRATOR
Capacity:7 Cu. Ft.
Bowl Size:46.5" I.D. x 19" Deep
Discharge Height to Floor:32"
EQUIPPED WITH:
Polyurethane Lined Bowl
Selector Switch For Compound On-Off
Pushbuttons For Start - Stop
Timer & Hour Gauge
3 HP 1400 RPM 220/3/60 Cycle Motor
|
|
| Ad # 8338 | Vibratory Equipment |
| — |
Sweco |
FMD7LR |
Good |
sold |
Photo /
More Info. |
| 7 Cu. Ft.: USED 7 CU. FT. SWECO VIBRATORY FINISHING MILL
Capacity:7 Cu. Ft.
Load Capacity:2100lbs
Straight Part Length:20" Maximum
Bowl Size:44" I.D. x 13" Deep
Discharge Height:18"
EQUIPPED WITH:
3/4" Polyurethane Liner
Free Standing Control w/Timer
Quick Release Discharge Door
5 HP 1200 RPM 220/440/3/60 Motor
|
|
| Ad # 8335 | Vibratory Equipment |
| — |
Deburring |
R-48 |
Good |
sold |
Photo /
More Info. |
| 10 CU. FT. ELECTRO DEBURRING VIBRATORY PARTS FINISHING MACHINE: USED 10 CU. FT. ELECTRO DEBURRING VIBRATORY PARTS FINISHING MACHINE
Arranged For Wet - Dry Operation
Vibratory Chamber Size:24" Dia. x 48" Long x 17” Deep Top Loading Opening:14" Wide x 48" Long x 4” High
Discharge Door:7" Wide x 5" High
Discharge Height:37" From Floor
Amplitude Range:1/64" - 3/8" (Variable)
EQUIPPED WITH:
Pushbutton For Start - Stop
Cycle Time Selector
Abrasion Resistant Tub Liner
10 HP 220/440/3/60 Motor
|
|
| Ad # 8339 | Vibratory Equipment |
| 1998 |
Almco |
V-1615 |
Good |
sold |
Photo /
More Info. |
| 3 CU. FT. ALMCO VIBRATORY FINISHING MILL: USED 3 CU. FT. ALMCO VIBRATORY FINISHING MILL
Capacity:3 Cu. Ft.
Tub Size:16" L-R x 15" F-B x 17.5" Deep
Discharge Door:7.75" x 6"
Discharge Height:16.5" From Floor
EQUIPPED WITH:
Polyurethane Liner
Pushbuttons For Start - Stop
Process Timer
Hours Gauge
3 HP 230/460 Volt Motor
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
