|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10891 | CNC Lathe Part & Accessories |
| — |
brown & sharp |
— |
Fair |
sold |
Photo /
More Info. |
| 36" shaft centering bar: 36" center distance
8" max swing |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10890 | Tool Room Lathe 8in. to 14in. swing |
| 2000 |
Turn Pro |
111.2000 |
Very Good |
sold |
Photo /
More Info. |
| 10" swing x 20" centers: 10" swing over bed , 6.5" over cross slide
20" between centers
6" 3 jaw chuck
135-3000 rpm
1 hp
1-1/4 spindle bore
english and metric threading
carriage vari speed auto feed
collet set 5c english and metric-shown
QC toolpost w/ 5 holders shown
coolant
manuals
rigging/loading fee 600.00 |
|
| Ad # 15351 | Ram Type & Saddle Type Turret Lathes |
| ? |
Warner & Swasey |
# 3 /M1200 |
Good |
sold |
Photo /
More Info. |
| 12" chuck: Warner & swasey # 3 turret lathe
std mfg specs below-please verify actual machines
Hardened and ground bedways - Maximum swing over bedways: 15-3/8” - Spindle bore: 1-27/32” - 12 spindle speeds: 67 to 1480 RPM - Standard feeds on both aprons - A1-6 American standard spindle taper - Includes 10” 3 jaw manual chuck - Includes hex turret - Chip pan and miscellaneous guards - Approx. weight: 3,250 LBS Elect.
Specs: - HP: 5/2.5 - Volts: 220 - Phase: 3 - Cycle: 60
Type A Spindle Nose, 6" size. There are both outer and inner bolt circles, (23) 1/2-13 tapped holes in M-1200
Note: nice machine,qc tool post not included |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10889 | 3 Axis Fully Automatic Surface Grinder |
| — |
Gallmeyery & Livingston c |
550 |
Good |
sold |
Photo /
More Info. |
| 12 x 36 " w auto downfeed: 12 x 36 perm mag chuck-fine pole
over wheel dresser
14" wheel x 5" bore x 2" width
1750 rpm
coolant
manuals
vert feed 0.0001 (incremematic) feed
auto lube
includes transformer converts from 575/3 to 230/3 |
|
| Ad # 10888 | Vertical Spindle - Blanchard Type |
| 1984 |
Gockel |
G50ELT |
Very Good |
sold |
Photo /
More Info. |
| Knife grinder: 127"L x 6-1/4"W: Knife Grinder
chuck: electrp magnetic-122" plus 5"(3100mm plus
5" extsion) check length overall
6-1/4" width chuck
chuck rotates 180 deg both directions
table cross feed is variable speed and rpm of
motor speed 1750 RPM constant
15HP motor
Quick change magnetic wheel lock system
DRO-single axis on vertical spindle travel
has wear strips(guide bands) on table
head down feed is variable speed along with cross
feed traverse speed
wheel: 8" dia
can be set up for segments but currently using disc
also has diamond and boron wheel included
Auto downfeed and traverse-vari speed
coolant tank
paper filter w/ auto paper feeder and spare paper
rolls included |
|
| Ad # 14513 | Surface Grinders |
| 90's? |
KO LEE |
SE618 |
Good |
sold |
Photo /
More Info. |
| 6 x 18" manual grinder: KO Lee manual 6 x 18" surface grinder
chuck: 6" x 18" perm mag
motor: 2HP
WIDTH AND LENGTH GROUND : 6" X 18"
LONGITUDINAL TRAVEL :....... 20"
CROSS FEED TRAVEL ......... 7- 1/4"
MAX. WORKING HEIGHT (DISTANCE FROM TOP
SURFACE OF TABLE TO CENTERLINE OF SPINDLE):16-
5/8"
MAXIMUM GRINDING WHEEL DIAMETER.... 8"
ELEVATING HANDWHEEL GRAD. ... 0.0001"
ONE REV. OF VERTICAL HANDWHEEL IS
:0.05"
CROSS FEED HANDWHEEL GRAD. :0.001"
SPINDLE SPEED : 2,850 RPM
APPROXIMATE MACHINE WEIGHT : 1,500
LBS.
EQUIPPED WITH:
2 HP 3/60/208-230-460 VOLT SPINDLE
V AND FLAT WAY CONSTRUCTION
manual lube system
6" X 18" "WALKER CERAMAX" FINE-
DIVISION
PERMANENT
MAGNETIC CHUCK (WILL BE PROVIDED
WITH
MACHINE)
notes:includes dust collection
system
this machine will look new with a
little
dusting...very very nice rare find!! |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 15350 | Welding Positioners |
| ? |
All Fab corp |
PS-1F-5 |
Excellent |
sold |
Photo /
More Info. |
| 6" chuck: 200lbs max: All Fab # PS-1F-5 welding positioner
welding positioner
chuck: 6" 3 jaw
capacity: 200lbs at horizontal
capacity:100lbs at 90 deg
center of gravity at:2"
tilt angle : up top 90 deg
RPM:0.3-5.0 rpm vari speed-foot pedal or
reastat on side
Note: like new : little use if any on it
std mfg specs below
PS-1F Standard Features:
The PS-1F the ideal small bench top welding
positioner. The PS-1f has quality and
features
normally found on only much larger welding
positioners.
Solid State D.C. infinitely variable
speed table rotation.
Heavy duty fully enclosed worm gear
rotation drive.
On/off electric foot control.
500 amp welding ground at 50% duty
cycle.
120 volt AC 50/60 Hz input power.
Machined table with centering grooves
and
6 tee slots for ANSI Tee nuts.
High frequency protected for Tig
welding.
Dynamic braking brings table rotation to
a quick stop.
Durable baked on enamel paint finish.
Infinitely variable table tilting with
degree scale.
Clockwise and counter clockwise table
rotation.
Highest quality design and construction
available.
Specifications Model PS-1F Welding
Positioner
Maximum capacity table in the flat
position200 lbs
Maximum capacity table at 90 degrees100 lbs
Maximum rotation torque model PS-1F-5110 lb-
inches
Rotation centroid max capacity model PS-1F-
51 inch
Rotation centroid max capacity model PS-1F-
150.39 inches
Tilting centroid at max capacity2 inches
Table tilt degrees0 to 90
Rotation speed model PS-1F-5.3 to 5.0 rpm
Rotation speed model PS-1F-151 to 15 rpm
Table diameter12 inches
Tee slots6 at 60 degrees
Table height in the flat position14.88
inches
Weight approximate78 lbs |
|
| Ad # 15352 | Dust / Exhaust Collectors |
| ? |
Lincoln |
Mobiflex 200-M |
Excellent |
sold |
Photo /
More Info. |
| —: Lincoln Mobiflex # 200-M portable welding fume
extractor with movable arm and base unit
Note very little use on machine
std factory specs below
Top Features
Generous airflow 735 CFM
Internal spark arrestor
Optimal motion and reach for work area
Filter status indicator
Processes
Stick, TIG, MIG, Flux-Cored
FUME DOESN’T STAND A CHANCE
Mobiflex® low vacuum systems for welding
fume
extraction and filtration. Their size and
mobility make them ideal for smaller
manufacturing facilities that require light to
medium duty welding fume extraction in
variable
locations. Not suitable for use with cutting
or
arc gouging operations.
The Mobiflex is ideally used for:
Small Manufacturing Facilities
Schools/Training
Fabrication
Plant Maintenance and Repair
FEATURES
Generous Airflow: 735 CFM with LFA
3.1/4.1 extraction arm. CFM level is dependent
upon arm length, fan type and
system maintenance.
Internal spark arrestor: Functions as a
pre-filter for larger sized particulate.
Prevents sparks from reaching the filter.
Optimal motion and reach for work area:
Choose from a variety of extraction arm models
or select a hose/hood set.
Filter status indicator: Visual guide to
remaining filter life.
BENEFITS
Cleaner work environment: Reduce dust
and
dirt in operator and surrounding work areas.
Filter size: Larger surface area
requires
fewer changes, helping to lower operational
costs.
Extraction Arms: Allow for optimal
motion
and reach for multiple work areas.
Front casters and rear wheels: Provide
ideal mobility and positioning.
MOBIFLEX 200-M FILTER SYSTEM
The Mobiflex® 200-M has one of the largest
disposable filter cartridges in its class; the
LongLife filter has a surface area of 538 ft²
(50 m²). The combination of filter size and
unique 3D-filter pleat structure results in
higher filter efficiency, longer filter life,
and lower operational costs.
Located on the front of the Mobiflex® 200-M
is a filter status indicator. The filter
status
indicator gradually moves from white to red as
the filter becomes saturated with particulate,
providing visual indication of when system
maintenance and filter replacement are
necessary.
A washable aluminum pre-filter removes
larger-sized particulate and provides spark
entrapment. |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 14572 | Surface Plates |
| ? |
? |
4 x 8 granite |
Good |
sold |
Photo /
More Info. |
| 4' x 8' granite surface plate: used granite inspection surface plate 4ft x 8ft
includes metal base-shown
grade AA :flatness 0.0002 upon last
calibration
depth of granite 8.5"
last calibrated in 2000
nice custom cover included
height to top of plate to floor: 31"
very nice plate! |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 14511 | Vibratory Equipment |
| — |
Burr King |
M45 |
Good |
sold |
Photo /
More Info. |
| 4.5 CU ft: Burr King # 45 tub deburring machine
Specs:
Part length Max: 43"
Part width Max: 33"
total volume: 4.5 Cu ft
tub width inside: 15"
tub length inside: 35"
tub depth inside: 16"
max part length: 34"
media load 250 lbs
part load max: 225 lbs
motor HP: 1.5
includes filter pak: # 4000
note: unit was relined recently &
includes media |
|
| Ad # 14510 | Vibratory Equipment |
| — |
burr king |
M85 |
Good |
sold |
Photo /
More Info. |
| 8.5 cu ft: Burr King M85 vibratory tub de-burring machine
General data:
Length Max of part: 48"
Width Max of part:36"
Height max of part: 45"
total cu ft: 8.5"
working volum: 7.2 cu ft
tub dimensions:
inside width 20"
tub depth-inside: 20"
max part length: 36"
media load: 450 lbs
3 hp
includes: filter pak unit 8000
includes: cover
Note: unit was recently re-lined includes media
very nice unit! |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
