|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5021 | Turning Center 4 - 10 in. chuck |
| 1984 |
Hardinge |
SR 2-AB |
Good |
Sold |
Photo /
More Info. |
| Hardinge Superslant CNC Lathe: Hydraulic tail stock
Collett chuck
Parts catcher
Chip conveyers
ANSI A2-5" spindle configuration
Hole through spindle 1-7/8"
16C Collett capacity 1-5/8"
Chucking capacity 8",not included,has collet chuck
Spindle speed range 40 to 4000rpm
D.C. spindle drive 13.4hp
Max. swing dia. 19"
Max. threading dia. 8"
Max. threading length 16"
Max. turning dia. 8"
8 station upper turret
Square tool size 3/4"
Round tool dia. 1" Max. Z-axis travel 16-11/32"
Max. X-axis travel(Upper turret) 4-1/2"
Max. X-&Z-axis feedrate(Traverse rate) 200ipm
MT #3 Center
Spindle face to tailstock 20"
Max. tailstock travel 15"
Rapid traverse & return rate 200ipm
|
|
We found 9 matching ads. Now displaying the remaining 9 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5218 | Ram Type & Saddle Type Turret Lathes |
| 1970 |
WARNER & SWASEY |
M4670 |
Very Good |
Sold |
Photo /
More Info. |
| #5-4 1/2 WARNER & SWASEY M4670 Ram Type Turret Lathe, : Specifications:
Swing over Bed 20"
Swing over Cross-Slide 10-1/4"
Spindle Bore 4-5/8"
Spindle Mount A1-11
Spindle Speeds (Preselect Head) (24) 25 to 1000 RPM
Carriage Feeds (6) .005 to .047 IPR
Cross Feeds (6) .002 to .018 IPR
Turret Feeds (6) .004 to .045 IPR
Motor 20/10HP 440V 3Ph 60C
Weight (Approximate) 10,000 Lbs.
Floor Space (excluding barfeed) 129" x 75" x 60"Ht.
Equipped with Collet Setup, Collet Pads, Hydraulic Barfeed; Square Turret Tool Post, Rear Cutoff Toolpost; Taper Attachment, Leadscrew Threading Attachment and Hydraulic Rapid Traverse on Cross Slide Carriage; Coolant; 2 each Short and Long Flange Tool Holders
|
|
| Ad # 5217 | General Purpose Lathe 15in. to 23in. swing |
| — |
COLCHESTER |
8000 |
Good |
Sold |
Photo /
More Info. |
| 15"x 50" COLCHESTER 8000 Engine Lathe, : Specifications:
Swing over Bed 15-1/2"
Swing over Cross-Slide 9-1/2"
Distance between Centers 50"
Spindle Speeds (16) 25 to 2000 RPM
Spindle Mount D1-6 Camlock
Spindle Bore 2"
Feeds(Range) (15) .0015 to .040 IPR
Threads(Range-Inch) (45) 2 to 72 TPI
Threads (Range-Metric) (39) .2 to 14 mm
Tailstock Taper #4 MT
Motor 230V 3PH 60C
Dimensions 38" X 95"
Accessories Included 10" 3-Jaw BUCK Adjustrue Chuck, 5C Lever Collet Closer, 12" 4 Jaw Chuck, Taper Attachment, Quick Change Toolpost, Drill Chuck, Trav-A-Dial, Coolant
|
|
| Ad # 5215 | Tool Room Lathe 8in. to 14in. swing |
| 1981 |
HARDINGE |
HLVH |
Very Good |
sold |
Photo /
More Info. |
| 11"x 18" HARDINGE HLVH Precision Toolroom Lathe, S/N-HLV-H-8895-T, Use: Specifications:
Swing over Bed 11"
Swing over Cross-Slide 6"
Distance between Centers 18"
Spindle Speeds Variable 125 to 3000 RPM
Spindle Mount Hardinge Taper & 5C
Spindle Bore 1" Through Collet Tube
Feeds(Range) (Variable DC Motor) 5/16 to 7 IPM
Threads(Range) in Gearbox (27) 11 to 108 TPI
Tailstock Taper #2 Morse
Tailstock Quill Travel 3-3/4"
Overall Dimensions 34" x 70" x 58" Ht
Accessories Collet Closer, Micrometer Carriage Stop
|
|
| Ad # 5216 | Tool Room Lathe 8in. to 14in. swing |
| 1986 |
HARDINGE |
HLVH |
Excellent |
Sold |
Photo /
More Info. |
| 11"x 18" HARDINGE HLVH Precision Toolroom Lathe, S/N-HLVH-12427-T, Use: Specifications:
Swing over Bed 11"
Swing over Cross-Slide 6"
Distance between Centers 18"
Spindle Speeds Variable 125 to 3000 RPM
Spindle Mount Hardinge Taper & 5C
Spindle Bore 1" Through Collet Tube
Feeds(Range) (Variable DC Motor) 5/16 to 7 IPM
Threads(Range) in Gearbox (27) 11 to 108 TPI
Tailstock Taper #2 Morse
Tailstock Quill Travel 3-3/4"
Overall Dimensions 34" x 70" x 67" Ht
Accessories Collet Closer, 3 Jaw Chuck, 4 Jaw Chuck, Toolpost, Collets
|
|
| Ad # 5203 | Second Operation |
| 1960 |
HARDINGE |
DSM 59 |
Good |
sold |
Photo /
More Info. |
| HARDINGE DSM 59 Second Operation Lathe, S/N-DV59-6975-3: Specifications:
Swing over Bed 9"
Swing over Cross-Slide 4-1/2"
Distance Spindle to Turret 3" thru 18"
Spindle Bore 1" Thru 5C Collets
Spindle Mount 5C
Spindle Speeds Variable
Cross Slide Feeds Hand Lever
Turret Feeds Hand Lever
Turret Travel 4"
Turret Hole Size
Motor(s) 2-Speed 3/4HP
Accessories 5C Collet Closer, Lever Cross Slide with Front & Rear Tool Holders, Lever Bed Turret
Dimensions 29"x 68"
|
|
| Ad # 5204 | Second Operation |
| 1981 |
HARDINGE |
DSM59 |
Good |
sold |
Photo /
More Info. |
| HARDINGE DSM59 Second Operation Lathe, S/N-DV59-16300 : Specifications:
Swing over Bed 9"
Swing over Cross-Slide 4-1/2"
Distance Spindle to Turret 3" thru 18"
Spindle Bore 1" Through 5C Collet
Spindle Mount HARDINGE Taper
Spindle Speeds Variable 230 - 3500 RPM
Cross Slide Lever Operated
Turret Feeds Hand
Turret Travel 4"
Motor 2 Speed 220V 3Ph 60C
With Lever Cross Slide, Bed Turret, 5C Collet Closer, Coolant
|
|
| Ad # 5200 | Second Operation |
| 1981 |
Hardinge |
DSM 59 |
Very Good |
sold |
Photo /
More Info. |
| HARDINGE DSM-59 Second Operation Lathe, S/N-DV59-16185 : Specifications:
Swing over Bed 9"
Swing over Cross-Slide 4-1/2"
Distance Spindle to Turret 3" thru 18"
Spindle Bore 1" Through 5C Collet
Spindle Mount HARDINGE Taper
Spindle Speeds Variable 230 - 3500 RPM
Carriage Feeds None
Turret Feeds Hand
Turret Travel 4"
Turret Hole Size 5/8"
Motor(s) 2 Speed 220V 3Ph 60C
Dimensions/Weight 36" x 68" 1000 Lbs.
With Lever Cross Slide, Bed Turret, 5C Collet Closer, Coolant
|
|
| Ad # 5202 | Second Operation |
| — |
HARDINGE |
21 B&S Spindle |
Good |
Sold |
Photo /
More Info. |
| HARDINGE #21 B&S Spindle Second Operation Lathe, S/N-DV59-14160 : Specifications:
Swing over Bed 9"
Swing over Cross-Slide 4-1/2"
Distance Spindle to Tailstock 0" thru 18"
Spindle Bore 1.050"
Spindle Mount B&S #21
Spindle Speeds 150 - 3500 RPM
Spindle Drive Type Variable
Tailstock Feeds Lever
Tailstock Travel 5.25"
Tailstock Hole Size 5/8"
Motor(s) 2 Speed 440V 3Ph 60C
Dimensions/Weight 27" x 58" 1000 Lbs.
Accessories Tool Post, Worklamp
|
|
| Ad # 5201 | Second Operation |
| 1971 |
HARDINGE |
DSM59R |
Good |
sold |
Photo /
More Info. |
| HARDINGE DSM59R Second-Operation Lathe, S/N-DV59-12029: Swing over Bed 9"
Swing over Cross-Slide 4-1/2"
Distance Spindle to Turret 3" thru 18"
Spindle Bore 1-1/16"
Spindle Mount HARDINGE Threaded
Spindle Speeds (10) 450 to 4000 RPM
Spindle Drive Type Double Belt Pulleys (3 Sets)
Turret Feeds Hand
Turret Travel 4"
Turret Hole Size 5/8"
Motor(s) 2 Speed 208-220V 3Ph 60C
Dimensions/Weight 29" x 68" 1000 Lbs.
Accessories 5C Lever Collet Closer, Lever Cross Slide, Bed Turret
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5221 | CNC Vertical Milling Machines w\o ATC |
| 1988 |
WEBBMATIC |
5BVK |
Very Good |
Sold |
Photo /
More Info. |
| —: #5BVK WEBBMATIC 800 CNC Vertical Mill, Fanuc 0M Control, 13"x 42" 5HP, S/N-... |
|
| Ad # 5101 | CNC Vertical Milling Machines w\o ATC |
| — |
Milltronics |
Partner IV |
Good |
Sold |
Photo /
More Info. |
| Milltronics Partner IV CNC Knee Mill: SPECIFICATIONS
TRAVELS (X AXIS) ----------------------- 32"
(Y AXIS) ----------------------- 16"
(Z AXIS) ----------------------- 5"
SADDLE WIDTH --------------------------- 38"
RAM STYLE ------------------------------ RIGID
KNEE TRAVEL ---------------------------- 12"
TABLE SIZE ----------------------------- 42" X 13"
NUMBER OF T-SLOTS ---------------------- 3
T-SLOT WIDTH --------------------------- 5/8"
SPINDLE NOSE TO TABLE (MAX) ------------ 17"
SPINDLE MOTOR -------------------------- 3 H.P.
CONTROL -------------------------------- CENTURION IV
SPINDLE SPEED (LOW) -------------------- 60-500 RPM
(HIGH) -------------------- 500-4200 RPM
SPINDLE TYPE --------------------------- NST 30
MAXIMUM TABLE LOAD --------------------- 1500 LBS.
THROAT --------------------------------- 14"
MACHINE WEIGHT ------------------------- 4,400 LBS.
VOLTAGE -------------------------------- 208-240 VOLT, 3 PHASE
--------------------------------------------------------------------------------
FEATURES
- AUTOMATIC SPINDLE BRAKE
- AUTOMATIC LUBRICATION
--------------------------------------------------------------------------------
EQUIPPED WITH
- ELECTRONIC HANDWHEEL
- FLOOD COOLANT
- MONOCHROME CRT
- MANUAL SPINDLE SPEED
- 30K MEMORY STORAGE AREA
- HAAS 4TH AXIS ROTARY TABLE
- POWER DRAW BAR
--------------------------------------------------------------------------------
|
|
| Ad # 5100 | Vertical Machining Centers (VMC) |
| — |
Okuma & Howa |
Millac 3VA |
Very Good |
Sold |
Photo /
More Info. |
| Okuma & Howa Vert. mach. Center: SPECIFICATIONS
TABLE ---------------------------------------- 15" x 31-1/2"
TRAVELS -------------------------------------- X 22.8"
Y 14.1"
Z 19.6"
SPINDLE SPEEDS ------------------------------- 60-6000 RPM
FEEDS ---------------------------------------- .04 - 197 IPM
SPINDLE TAPER -------------------------------- CAT 40 V-FLANGE
SPINDLE MOTOR -------------------------------- 7.5 HP
--------------------------------------------------------------------------------
FEATURES
COOLANT SYSTEM
OH FANUC SERIES OM 3-AXIS CNC CONTROL WITH CRT
20 POSITION AUTO TOOL CHANGER
|
|
| Ad # 5099 | Vertical Machining Centers (VMC) |
| 1994 |
Kitamura |
Mycenter 3X |
Excellent |
Sold |
Photo /
More Info. |
| Very Nice Vert. Mach. Center: SPECIFICATIONS
SPINDLE RPM, LOW ---------------------------- 50 - 2300 RPM
HIGH --------------------------- 2301 - 10000 RPM
TOOL STATIONS ------------------------------- 20
TOOL TAPER ---------------------------------- CT-40
TRAVELS
X-AXIS ------------------------------------ 30"/900 IPM
Y-AXIS ------------------------------------ 18"/900 IPM
Z-AXIS ------------------------------------ 18.2"/700 IPM
SPINDLE MOTOR HP ---------------------------- 10/14-3/4 HP
TABLE DIMENSIONS ---------------------------- 35" x 16"
TABLE LOAD CAPACITY ------------------------- 1100 LBS.
MACHINE DIMENSIONS -------------------------- 9'8"W x 8'L x
10'T
MACHINE WEIGHT ------------------------------ 12,000 LBS.
--------------------------------------------------------------------------------
FEATURES
FLOOD COOLANT
YASNAC I-80 CNC CONTROLS
RIGID TAPPING
HIGH SPEED DOUBLE ARM AUTOMATIC TOOL CHANGER
HI/LOW GEARED HEAD
--------------------------------------------------------------------------------
EQUIPPED WITH
- 4TH AXIS CAPABILITIES
- WORK LIGHT
- FULL ENCLOSURE
- COOLANT TANK
- CENTRAL WAY LUBE SYSTEM
- NSK SPINDLE LUBE SYSTEM
--------------------------------------------------------------------------------
NOTE
SPECIFICATIONS SUBJECT TO VERIFICATION
NOTE: HAS ONLY RUN PLASTIC & ALUMINUM
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5264 | Horizontal Mills |
| — |
Kent Owens |
1177 |
Fair |
sold |
Photo /
More Info. |
| Kent Owens Horizontal Mill: 1" arbor
Electric spindle
Hydraulic Table measures 6"x22"
Energy Mfg. Hyd. Pump |
|
| Ad # 5222 | Vertical Bed Mills |
| — |
RAMBAUDI |
— |
Good |
sold |
Photo /
More Info. |
| RAMBAUDI Vertical Tracer Mill 2 Spindle: Specifications:
Overall Table Size 25-1/4" x 75-3/4" (105" with Extension)
Table Working Area 19-1/2" x 72"
Travel of Adjustable Ram 26-1/2"
Taper in Each Spindle #50 MMT
Spindle Travel 5"
Both Heads are Mounted Adjustable & Mounted on 46" Long T-Slotted Mounting Plate
Spindle speeds -- Both Heads 80 to 2400 RPM
Horsepower of Each Head 7-1/2 HP 220 V
Equipped With Rosebrooke Tracer Mounted on Side Mount Adjustable Mounting Plate
Complete with Hydraulic Unit
29" Table Extension
|
|
| Ad # 5219 | Knee Mills (Bridgeport Type) |
| 1974 |
BRIDGEPORT |
2J |
Good |
sold |
Photo /
More Info. |
| BRIDGEPORT #2J Vertical Mill, Pr Feed, : Specifications:
Type of Spindle Drive Variable Speed
Spindle Speeds Variable- 60 to 4200 RPM
Quill Travel 5"
Spindle Feeds 3 Ranges
Spindle Taper R-8
Table Size 9" x 42"
Table Travels 26"
Table Feed BRIDGEPORT Variable Speed
Cross Feed 12"
Vertical Feed 15"
Motor 1-1/2HP 220/440V 3Ph 50/60C
Equipped with Power Feed, Chrome Ways
|
|
| Ad # 5143 | Knee Mills (Bridgeport Type) |
| — |
Hurco |
MI-310 |
Very Good |
sold |
Photo /
More Info. |
| Very nice Hurco 3-axis milling machine: Original tape drive has been removed. Runs by a
separate computer that is included. Customer has
manuals but the spec sheet is missing. Travels X-
21", Y-10-1/2". 60-3,000 rpm. 2 hp motor. Very clean
machine. |
|
| Ad # 5143 | Knee Mills (Bridgeport Type) |
| — |
Hurco |
MI-310 |
Very Good |
sold |
Photo /
More Info. |
| Very nice Hurco 3-axis milling machine: Original tape drive has been removed. Runs by a
separate computer that is included. Customer has
manuals but the spec sheet is missing. Travels X-
21", Y-10-1/2". 60-3,000 rpm. 2 hp motor. Very clean
machine. |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5205 | Automatic Bar Machines |
| 1978 |
HARDINGE |
DSMA |
Good |
Sold |
Photo /
More Info. |
| 1" HARDINGE DSMA Automatic Screw Machine, S/N-DSM-A-5C-897: Spindle Capacity: 5C Collets 1-1/16"
3 and 4 Jaw Chucks 5" (Chucks not Included)
Spindle Speeds: (12) 250 to 4200 RPM
Front and Rear Cross Slides: Independent
Turret: 6 Position with 3" Stroke
Vertical Cutoff Slide: Independent
Equipped with: Coolant and Chip Guard
Air Operated Collet Closer
Automatic Lubricator
no tooling
Motors: Main 2 HP 3/60/220/440
Hydraulic 2HP 3/60/220/440
Weight: 2800 Lbs., Approximately
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5269 | Multi Spindle Drill Press |
| — |
Powermatic |
1150 |
Fair |
sold |
Photo /
More Info. |
| Powermatic 7-Head Drill Press: 7" Throats
Variable speed belt drives |
|
| Ad # 5207 | Single Spindle Drill Press |
| — |
ROCKWELL |
17-600 |
Good |
sold |
Photo /
More Info. |
| 17" ROCKWELL 17-600 Variable Speed Drill Press, S/N-1734180: Specifications:
Spindle Taper #2 Morse
Spindle Travel 6"
Spindle Speeds, Variable 350 to 4250 RPM
Throat 8-1/2"
Spindle to Table 0 to 31"
Spindle to Base 44" Maximum
Column Diameter 3-1/2"
Base Working Surface 13-1/2" x 16"
Production Table Size 15-1/2" x 20-1/2"
Table Working Surface 12-1/2" x 17"
Overall Dimensions 21" x 26" x 71" Ht.
Motor 1HP 115/230V 1Ph
|
|
| Ad # 5208 | Multi Spindle Drill Press |
| 1967 |
BURGMASTER |
1D |
Good |
sold |
Photo /
More Info. |
| 1/2"x 6-Spindle BURGMASTER #1D Turret Drill, S/N-1D-2741, Used : Specifications:
Number of Spindles 6
Spindle Speeds 4 per Spindle. 275 to 4010 RPM
Drilling/Tapping Capacity 1/2" in Cast Iron
Spindle Travel 6"
Head Travel 12"
Distance- Spindle to Table 20" Maximum
Distance- Spindle to Column 8-1/2"
Table Size 12"x 17" with Coolant Trough
Motor 2-Speed
Accessories Included (5) Drill Chucks, Tapping Head
|
|
| Ad # 5023 | Tapping / Threading Equip. |
| 1998? |
General Inspection. Inc. |
Inductor |
Excellent |
sold |
Photo /
More Info. |
| Like new Thread Checker: Checks for threads using ultrasound
Also checks mixed, similar parts
Comparest to a given standard taught to the
machine
1-1/2" Max. dia. |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5146 | Cold Saws & Power Hack Saws |
| — |
Peerless |
41-01 |
Good |
sold |
Photo /
More Info. |
| 11" x 11" Variable speed draw saw: 12" vert. capacity.
14" horiz. capacity.
Adjustable stroke.
Variable speeds.
Extra blades.
machine has been siting outside for over a year, but ran when put outside..not covered |
|
| Ad # 5116 | Cold Saws & Power Hack Saws |
| — |
Pedrazzoli Perris |
350 Auto saw |
— |
SOLD |
Photo /
More Info. |
| PEDRAZZOLI PERRIS 350 AUTO SAW: CUTTING CAPACITY:
RECTANGLE ---------------------------- 4-3/4" X 6"
ROUND SOLID -------------------------- 4-3/4"
ROUND SQUARE ------------------------- 4-3/4"
MAIN MOTOR HORSEPOWER ------------------ 2-1/2
VOLTAGE, PHASE, CYCLES ----------------- 480/3/60
SAW BLADE SIZE ------------------------- 13"
SAW BLADE SPEEDS ----------------------- 2500 RPM
SAW HEAD FEED SPEEDS ------------------- INFINITELY VARIABLE
FEED STROKE LENGTH (SINGLE STROKE) ----- 25-3/16"
OVERALL DIMENSIONS --------------------- 7' X 4' X 5'
--------------------------------------------------------------------------------
FEATURES
- FULLY AUTOMATIC OPERATION
- PNEUMATIC VISES & MATERIAL SHUTTLE
- MATERIAL FEED STROKE ADJUSTABLE TO 3 CYCLES
- SAW HEAD FEED TYPE IS AIR OVER OIL CYLINDER
- MACHINE WIRED FOR 480 VAC
- SAW BLADE SPEED IS CHANGED BY CHANGING MOTOR
AND SAW BLADE HEAD PULLEYS
|
|
| Ad # 5114 | Horizontal Band Saws |
| — |
Marvel |
15A4 |
Good |
sold |
Photo /
More Info. |
| Marvel 15" Automatic Band Saw: CAPACITY ------------------------- 15" X 20"
ROUND CAPACITY ------------------- 15"
BLADE SIZE ----------------------- 1 1/4" X 15'6" X .042TH
VARIABLE SPEED ------------------- 55 - 400 FPM
MOTOR ---------------------------- 5 HP
WIRED ---------------------------- 220/440/3/60
LOAD CAPACITY -------------------- 7,000 LBS
--------------------------------------------------------------------------------
EQUIPPED WITH
*1 - 24" BAR FEED, MULTI-CYCLE
*1 - DISCHARGE TABLE
*5 HP VARIABLE SPPED 3 PHASE
*HYDRAULIC VISE WITH VARIPRESSURE
--------------------------------------------------------------------------------
|
|
We found 11 matching ads. Now displaying the remaining 11 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5263 | Surface Grinders |
| — |
Brown & Sharpe |
No. 2 |
Fair |
sold |
Photo /
More Info. |
| Brown & Sharpe Grinder, Magnetic Table: Mag. Table measures 5-1/2"x10-1/2"
Takes a 6" wheel |
|
| Ad # 5260 | Cylindrical Grinders (O.D. & I.D.) |
| — |
Heald |
75-A |
Good |
sold |
Photo /
More Info. |
| Heald ID Grinder: 9" Magnetic Chuck
1" Arbor
Chuck speed 550-1740 rpm
|
|
| Ad # 5259 | Jig Grinders |
| 1963 |
Atlantic |
4000 |
Very Good |
sold |
Photo /
More Info. |
| Very Nice Jig Boring Machine: 1-1/2HP 3.5 Amp motor
210-4200 rpm
Variable speed
1/2" chuck
12"x18' Table
10" throat
Built-in dial indicator in the vertical
Accu-Rite III control |
|
| Ad # 5209 | Surface Grinders |
| 1982 |
CHEVALIER |
FSG-618 |
Good |
sold |
Photo /
More Info. |
| 6"x 18" CHEVALIER FSG-618 Hand Feed Surface Grinder, S/N-02-3358, with: Specifications:
Longitudinal Travel 18"
Cross Travel 6"
Vertical Travel 16"
Max Distance Spindle to Table 17-1/2"
Wheel Size 8"x 3/4"x 1-1/4"
Type of Feeds Hand Feed Only
Spindle Speed 3440 RPM
Cross Dial Graduations 0.0005" Divisions
Vertical Dial Graduations 0.0001" Divisions
Motor(s) 1HP 220/440V 3Ph 3440RPM
Chuck 6"x 12" WALKER Electromagnetic with Fine Line Longitudinal Poles, No Rectifier
Accessories Included Ball Bearing Table Ways, One-Shot Lubrication, DRO scale on Cross Slide (Display is missing)
|
|
| Ad # 5212 | Tool & Cutter Grinders |
| — |
Multi-Grind |
MG2000 |
Good |
sold |
Photo /
More Info. |
| MG2000 MULTI-GRIND Punch & Die Grinder, S/N-127, with 6" Cup Wheel, Po: Specifications:
Spindle Motor HP 3/4 HP
Workhead Chuck 6" 3 Jaw with 2 Sets of Solid Jaws
Workhead Speed Variable (Electronic control)
In Feed Dial Graduations 0.001" (0.125" per revolution)
Cross Slide Travel 5" Variable Speed (Electronic control)
Electrics 115V 1Ph 60C
In-Feed Travel 8"
Max Distance (Chuck Face to 1-1/2" Thick Wheel) 7-1/2"
Equipped with Coolant, Control Panel for Manual/Automatic Operation, 6" 3 Jaw Chuck, Protractor for Angle Postioning of Workhead to Grind Concave/Convex Pieces
|
|
| Ad # 5210 | Surface Grinders |
| 1989 |
— |
618 |
Very Good |
Sold |
Photo /
More Info. |
| 6"x 18" HARIG Hand Feed Surface Grinder, S/N-7235-W, Walker PM Chuck, : Specifications:
Longitudinal Travel 20"
Cross Travel 6-3/4"
Vertical Working Height 11-3/4" (Under 7" Wheel)
Platen Working Area 6"x 18"
Wheel Size 7"x 1/2"x 1-1/4"
Maximum Wheel Size 8"x 1-1/4"x 1-1/4"
Spindle Speed 3425 RPM
Cross Dial Graduations .001"
Vertical Dial Graduations .0001"
Motor(s) 1-1/2HP 208-230/460V 3Ph 60C
Dimensions 39"F-B x 49"L-R x 78"Ht
Equipped With
1-Axis DRO,
WALKER 6"x18" Ceramax Magnetic Chuck,
Automatic Lube |
|
| Ad # 5213 | Tool & Cutter Grinders |
| — |
TACCHELLA |
4M |
Very Good |
sold |
Photo /
More Info. |
| #4M TACCHELLA Tool & Cutter Grinder:
Type of Grinding Head Tilting, Independent
Reversible Spindle
Grinding Head Mount 4" Eccentric
Spindle Speeds (4) 2200 to 6400 RPM
Table Size 5"x 35"
Table Travel- Longitudinal 16"
Table Travel- Cross 8"
Head Travel- Vertical 10"
Maximum Grinding Wheel Size 8" OD
Spindle Tilts +/- 20 Degrees
Spindle Swivels 360 Degrees
Table Swivels 360 Degrees
Spindle Motor (2-Speed) 1.47/1.1KW 220V 3Ph 60Hz
3320/1680RPM
Equipped with (2) Tailstocks, Sensitive Workhead
with Index Plates, Motor for Workhead
|
|
| Ad # 5211 | Surface Grinders |
| 1990 |
— |
— |
— |
Sold |
Photo /
More Info. |
| 12"x 24" AMW GS1224BH Surface Grinder, S/N-B10351-2 : Specifications:
Longitudinal Travel 28"
Cross Travel 13"
Vertical Travel 15"
Max Distance Spindle to Table 20"
Wheel Size 12" x 1"x 3" Hole
Longitudinal Feed Hydraulic, Variable
Cross Feed Electronic Step, Variable
Vertical Feed Computerized Step or Plunge, Programable
Vertical Fine Feed .0001" Graduations
Electromagnetic Chuck 12"x 24" Fine-Line with Rectifier
Electrics 220 V 3Ph 60C
Floorspace Required 112" x 66" x 80" Ht
Weight 5000 Lbs., Approximate
|
|
| Ad # 5196 | Cylindrical Grinders (O.D. & I.D.) |
| — |
Myford |
— |
Good |
Sold |
Photo /
More Info. |
| 5"x12" MYFORD PLAIN CYLINDRICAL GRINDER: 5'X12" TABLE
Spindle speed 1,830-1,988rpm
Power in/outfeed
Coolant reservoir |
|
| Ad # 5121 | Belt & Disc Grinders |
| 1994 |
Cemco |
UR2152MW |
Very Good |
SOLD |
Photo /
More Info. |
| CEMCO MODEL UR2152MW BELT SANDER: NUMBER OF HEADS ----------------------------- 1
WORKING HEIGHT ------------------------------ 6"
WORKING WIDTH ------------------------------- 52"
NORMAL HP ----------------------------------- 30 HP
ABRASIVE BELT SIZE -------------------------- 75"
NET WEIGHT ---------------------------------- 5060 LBS.
OVERALL DIMENSIONS -------------------------- 83" L X 89" W
(INCLUDES MOTOR)
X 73" HIGH
--------------------------------------------------------------------------------
FEATURES
- DIGITAL READOUT INDICATOR - RELIABLE DISPLAY TO
MEASURE CONVEYOR BED OPENING TO .001"
- ELECTRIC EYE BELT AND EMERGENCY RUN-OFF - NO CAT
WHISKERS TO SAND OFF AND REPLACE
- EMERGENCY STOP - AUTOMATICALLY ACTIVATED DURING
EITHER BELT BREAKAGE OR MISTRACKING
- 5.5" RUBBER COVERED CONTACT DRUM
- DOUBLE INFEED & OUTFEED PINCH ROLLERS
- CONSTRUCTED USING STANDARD INDUSTRIAL U.S. COMPONENTS
- CONVEYOR BED JACKS - FOUR EACH 1-1/4" WORM AND WORM
GEAR 5 TON JACKS
- DRUM BRAKES - LOW MAINTENANCE DRUM BREAK STOPS SANDER
HEAD IN LESS THAN THREE SECONDS
- EXTRA LARGE IN-FEED AND OUT-FEED LOADING AREAS
- HIGH QUALITY SLIPDISC CONVEYOR DRIVE UNIT 15-60 FPM
WITH NO BELTS/SHEAVES TO WEAR OUT OR REPLACE
- PARTS DRYER FEATURES THREE SETS OF POWERED SQUEEGEE
ROLLERS AND A TOP & BOTTOM SPLIT AIR KNIFE TO DRY PARTS.
ALL WET UNITS COME EQUIPPED WITH THE MANUAL FILTER SYSTEM.
SYSTEM OFFERS A COMPLETE RECIRCULATION SYSTEM W/INTERNAL
MANIFOLDS, PROPERLY SIZED COOLANT PUMP, AND A WASH DOWN
HOSE
- WET MACHINES - INCLUDE SECONDARY COOLANT FILTRATION
SYSTEM (STANDARD WITH BOTH MANUAL INDEXING SYSTEMS AND
AUTO SYSTEMS)
- SECONDARY PART RINSE MANIFOLD PRIOR TO DRYER (WET ONLY)
--------------------------------------------------------------------------------
EQUIPPED WITH
- 75" ABRASIVE BELT LENGTH
- WORKING WIDTH 52"
- ELECTRIC EYE TRACKING
- VARIABLE SPEED CONVEYOR
- HEAVY DUTY DRUM BRAKE
- LOAD METER ON MAIN DRIVE MOTORS
- DOUBLE INFEED AND OUTFEED HOLD DOWN ROLLS ON EACH HEAD
- EASILY REMOVABLE ACCESS DOORS
- ONE QUICK EASY ADJUSTMENT FOR THICKNESS
- 0 - 6" OPENING
- 110 VOLT CONTROL CIRCUITS
- HEAVY DUTY WELDED FRAME
- WET SYSTEM
- 30 HP
- AUTO LUBE
- STAINLESS STEEL DRUMS
- DRY BLOWER
- MACHINES COME STANDARD WITH A COMPREHENSIVE ANTI-CORROSION
PACKAGE TO INSURE YEARS OF RELIABLE OPERATION UNDER THE
HARSH WET GRINDING ENVIRONMENTS
--------------------------------------------------------------------------------
|
|
| Ad # 5096 | Belt & Disc Grinders |
| — |
Timesaver |
125-1MW |
Very Good |
SOLD |
Photo /
More Info. |
| 25" Wet Belt Sander: CAPACITY ---------------------- 25"
MOTOR ------------------------- 10 H.P.
CONTACT DRUM DIAMETER --------- 6"
BELT SPEED -------------------- 2900 SFPM
FEED SPEED -------------------- 15 - 40 FPM (VARIABLE)
WIRED FOR --------------------- 230V/3 PHASE/60
--------------------------------------------------------------------------------
EQUIPPED WITH
- WET OPERATION
- VARIABLE PASSLINE
- POSI-TRAK SENSING
- LOAD METER
- 10" INFEED CONVEYOR EXTENSION
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5262 | Metal Shapers, Horizontal |
| — |
Cincinnati |
— |
Fair |
Sold |
Photo /
More Info. |
| 16" Heavy Duty Shaper: 8" Cross vise included- 10" opening
10-1/2" throat
14"x16" table
@nd table for angle work measures 11"x15" |
|
| Ad # 5098 | Keyseaters |
| — |
Mitts & Merrill |
5 |
Good |
sold |
Photo /
More Info. |
| Mitts & Merrill Keyseater Priced Right: MAXIMUM KEYWAY WIDTH ---------------------- 3"
MAXIMUM KEYWAY LENGTH --------------------- 24"
LARGEST POST USABLE ----------------------- 4 7/8"
SMALLEST POST USABLE ---------------------- 3/8"
LARGEST BORE ------------------------------ 18"
FLOOR TO TABLE ---------------------------- 42"
CUTTING SPEED ----------------------------- 7 TO 23 FPM
FEED RATE PER STROKE ---------------------- .002" TO .010"
APPROX FLOOR SPACE ------------------------ 73" X 48"
WEIGHT (APPROX.) -------------------------- 4800 LBS.
--------------------------------------------------------------------------------
EQUIPPED WITH
- MISCELANEOUS TOOLING
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5144 | Wire EDM Machines |
| 1980? |
Elox |
Series I |
Needs Work |
sold |
Photo /
More Info. |
| Elox EDM- Wire Machine- needs work: Extra wire, tooling and manuals included.
Fanuc 2000 control. |
|
| Ad # 5094 | RAM / Conventional EDM Machines |
| 1993 |
Hansvedt |
Benchman |
Very Good |
SOLD |
Photo /
More Info. |
| "Benchman" EDM Machine: SPECIFICATIONS
TABLE SIZE -------------------------------- 9" X 14"
X AXIS TABLE TRAVEL ----------------------- 8-1/2"
Y AXIS TABLE TRAVEL ----------------------- 5-1/2"
Z AXIS HEAD TRAVEL ------------------------ 8.2"
POWER SUPPLY ------------------------------ 30 AMP
MAX ELECTRODE WEIGHT ---------------------- 66 LBS
MAX WORKPIECE WEIGHT ---------------------- 220 LBS
VOLTAGE ----------------------------------- 115 VOLT, 1 PHASE
--------------------------------------------------------------------------------
EQUIPPED WITH
- PULSE 201E 30 AMP POWER SUPPLY
- 3R TOOLING SYSTEM WITH SINGLE COLLET
- ANILAM EDM 3-AXIS DIGITAL READOUT
--------------------------------------------------------------------------------
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5267 | Miscellaneous / Other |
| '98 |
Midaco |
4020 |
Good |
sold |
Photo /
More Info. |
| Large Pneumatic Pallet Changer - Midaco 4020: 20"x40" Aluminum Tables
$22,500 when new |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5118 | Power Squaring Shear (Mechanical) |
| — |
Pexto |
12U52-A |
Good |
sold |
Photo /
More Info. |
| PEXTO 12 GA. SHEAR: SPECIFICATIONS
CUTTING LENGTH -------------------------------
52"
CAPACITY ------------------------------------- 12
GA.
WIRED ----------------------------------------
230/3/60
-------------------------------------------------
-------------------------------
EQUIPPED WITH
- 4' SQUARING ARM
- SHEET FEEDER - AMERICAN ACTIVATOR CORP.
MODEL BF48 S/N 17977
-------------------------------------------------
-------------------------------
|
|
| Ad # 5122 | Power Squaring Shear (Hydraulic) |
| — |
Cincinnati |
4FL16 |
— |
sold |
No Photo /
More Info. |
| CINCINNATI 16' X 1/2" HYDRAULIC SHEAR: CAPACITY IN MILD STEEL:
AT NOMINAL RAKE OF 3/8" ------------------ 1/2" X 16'
AT INCREASED RAKE OF 1/2" ---------------- 5/8" X 16'
LENGTH BETWEEN HOUSINGS -------------------- 16'-3"
DEPTH OF THROAT ---------------------------- 18"
BACK GAUGE RANGE --------------------------- 48"
SPEED, FULL LOAD DOWN ---------------------- 135 IPM
SPEED, RETURN ------------------------------ 290 IPM
STROKES PER MINUTE - FULL LENGTH CUT ------- 13
STROKES PER MINUTE - 24" CUT --------------- 40
HOLDDOWNS (12" CENTERS WITH EXTRA HOLDDOWNS
AT BOTH ENDS) ---------------------------- 19
HOLDDOWN FORCE, TONS ----------------------- 55
APPROXIMATE SHIPPING WEIGHT ---------------- 66,900 LBS.
--------------------------------------------------------------------------------
EQUIPPED WITH
- HOLDDOWN AND KNIFE GUARDS
- ADJUSTABLE RAKE
- ADJUSTABLE STROKE
- PNEUMATIC OPERATED ROLLER BALL TOP TRANSFERS IN TABLE
- AUTOMATIC PRESSURE LUBRICATION
- SINGLE STROKE CONTROL, INCLUDING "INCH" AND "RUN"
OPERATION
- HYDRAULIC HOLDDOWNS
- WATER COOLED OIL COOLER
- 10' SQUARING ARM
- 2 FRONT SUPPORT ARMS
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5142 | Press Brakes (Mechanical) |
| 1974 |
Knight |
16Ton |
Good |
sold |
Photo /
More Info. |
| Knight Press Brake: 96" capacity, 8" throat, 48" between frames. No back guage on this machine.... |
|
| Ad # 5088 | Press Brakes (Hydraulic) |
| — |
Amada |
RG-25 |
Very Good |
SOLD |
Photo /
More Info. |
| 25 Ton Hydraulic Press Brake: SPECIFICATIONS
TONNAGE -------------------------- 25 TONS
TABLE LENGTH --------------------- 47.3"
MAXIMUM BEND LENGTH -------------- 49.3"
DISTANCE BETWEEN UPRIGHTS -------- 40.2"
THROAT DEPTH --------------------- 7.88"
LENGTH OF STROKE ----------------- 3.94"
OPEN HEIGHT ---------------------- 14.58"
POWER REQUIREMENTS --------------- 3 KVA, 230 VOLT/3 PHASE
HYDRAULIC OIL RESERVOIR ---------- 6.86 GALLONS
WEIGHT (APPROX.) ----------------- 3,100 LBS.
CONTROL -------------------------- D-9 NC, S/N# FN66546
--------------------------------------------------------------------------------
EQUIPPED WITH
- CNC BACKGAUGE
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5102 | Tube & Pipe Notchers |
| — |
Boschert |
Eagle |
Good |
SOLD |
Photo /
More Info. |
| Boschert Hydraulic Notcher: SPECIFICATIONS
CAPACITY, MILD STEEL --------------------- 1/4"
STAINLESS STEEL ---------------- 3/16"
90 DEGREE NOTCH CAPACITY ----------------- 8-7/8" X 8-7/8"
TABLE SIZE ------------------------------- 35"W X 25"D
SPEED, VARIABLE -------------------------- 50 SPM
MOTOR ------------------------------------ 6-1/2 HP
--------------------------------------------------------------------------------
FEATURES
- FRONT TO BACK CUTTING TO HOLD MATERIAL AGAINST STOP
- MILLED BED SURFACE FOR NO FLOAT OR STICK OPERATION
- HI-CARBON, HI-CHROME BLADES
- INTERNAL STOP FOR SHEARING
- 2 12" COMBINATION HORIZONTAL HOLD DOWN AND STOP BARS
- ENGRAVED BRASS SCALES
- SOLID STATE CIRCUITRY
--------------------------------------------------------------------------------
EQUIPPED WITH
- FOOT PEDAL
- JOG, SINGLE, OR CONTINUOUS MODE
--------------------------------------------------------------------------------
|
|
| Ad # 5049 | Multi-Slides |
| — |
US Baird |
33 |
Very Good |
sold |
Photo /
More Info. |
| Recently rebuilt- multi-slide metalformer: Stripper head
Feeder
Straightener
Ram
4-slide
Air clutch
System 2500 control |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5162 | Dust / Exhaust Collectors |
| 2000 |
Wheelabrator |
512WCCMOD36 |
Excellent |
sold |
Photo /
More Info. |
| Wheelabrator Baghouse: Double Hopper
2 Airlocks
Baldor fan motor - 125 HP - 1780 rpm - 144 amps
94.5% NEMA nominal effeciency - ser. #0400C -
TEFC motor
Hartzell Fan - model 053-45-MHX3 - 1489 fan rpm -
12.5 HP - 1750 motor rpm
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5223 | Hydraulic H-Frame Press |
| — |
NUGIER |
H20-6 |
Good |
Sold |
Photo /
More Info. |
| 20-Ton NUGIER #H20-6 Hydraulic Press, S/N-397: Specifications:
Tonnage Rating 20 Ton
Ram Travel 6"
Ram Size 2-1/4"
Distance between Housings 24"
Bed Size 28" x 9" with 5" Open
Bed Travels 32"
Distance Ram to Bed 0 to 38"
Power System Hand Pump/Valve Hydraulic
Dimensions 31" x 33" x 73" Ht.
Weight, Approximate 350 Lbs.
|
|
| Ad # 5111 | Straight Side Press |
| 1975 |
Williams & White |
— |
Good |
sold |
Photo /
More Info. |
| 1 PREOWNED WILLIAMS & WHITE VERTICAL, HOUSING-TYPE, DOWN-ACTING HYDRAU: CAPACITY (PRESSING) ------------------- 500 TONS
CAPACITY (INTERMEDIATE PRESSING) ------ 145 TONS
CAPACITY (STRIPPING) ------------------ 125 TONS (NET)
LIFT CAPACITY @ FAST RETURN ----------- 20 TONS
BED SIZE ------------------------------ 60" X 72"
RAM SIZE ------------------------------ 60" X 72"
RAM SPEED ----------------------------- 9-990 IPM
PLATEN AREA --------------------------- 72" R-L X 60" F-B
DISTANCE BETWEEN HOUSINGS (R-L) ------- 73"
SIZE TIE RODS ------------------------- 6-3/4"
BOLSTER ------------------------------- 72" X 60" X 8"
DAYLIGHT (MOVING PLATEN TO BOLSTER) --- 60"
STROKE -------------------------------- 45"
SHUT HEIGHT --------------------------- 15"
WINDOWS ------------------------------- 30"
PLATEN SPEEDS:
FAST ADVANCE -------------------------- 990" PER MINUTE
INTERMEDIATE PRESSING ----------------- 30 TO 290" PER MINUTE*
PRESSING ------------------------------ 9 TO 87" PER MINUTE*
SLOW RETURN (STRIPPING) --------------- 28 TO 283" PER MINUTE
@ 125 TONS STRIPPING
FAST RETURN --------------------------- 905" PER MINUTE @ 20
TONS LIFT.
(* ADJUSTMENT OF INTERMEDIATE AND PRESSING SPEEDS WILL BE
PROPORTIONATE.)
HYDRAULIC CYLINDERS(ONE DOUBLE ACTING)- 18-1/2" X 15-1/2"
(TWO DOUBLE ACTING)- 8-1/2" X 7"
HYDRAULIC WORKING PRESSURE ------------ 2,616 PSI @ 500 TONS
HYDRAULIC PUMPS - OILGEAR ------------- #2 REQUIRED - DM-10025-M
TYPE MOTORS --------------------------- T.E.F.C.
HORSEPOWER & SPEED OF MOTORS ---------- TWO 100 H.P. - 900 RPM
NUMBER OF KNOCKOUT BARS IN SLIDE ------ (3)
STROKE OF KNOCKOUT BARS --------------- 3"
HYDRO-PNEUMATIC CUSHION:
NUMBER OF CUSHION PADS ---------------- (2)
CAPACITY EACH PAD --------------------- 80 TONS
TOTAL CAPACITY ------------------------ 160 TONS
SIZE EACH CUSHION PAD ----------------- 26" R-L X 46" F-B
STROKE -------------------------------- 15"
LIFTING CAPACITY ---------------------- 40 TONS,(20 TON EA. PAD)
CUSHION RETURN SPEED ------------------ 375" PER MINUTE-MINIMUM
--------------------------------------------------------------------------------
|
|
| Ad # 5093 | Straighteners |
| — |
Rowe |
CSF6-30-20J |
Good |
sold |
Photo /
More Info. |
| Combination Coil Cradle/Straightener: MAX. COIL CAPACITY ------------------------ 20,000
LBS
MAX/MIN COIL THICKNESS --------------------
.170/.048
MAX. COIL WIDTH --------------------------- 30"
CRADLE ROLL DIAMETER ---------------------- 5"
STRAIGHTENER ROLL DIAMETER ---------------- 4"
ROLL CENTER SPACING ----------------------- 4-
1/2"
FEED RATE --------------------------------- 0 -
250 IPM
VOLTAGE -----------------------------------
460/3/60
-------------------------------------------------
-------------------------------
EQUIPPED WITH
- EMERSON INDUSTRIAL PLC-II CONTROL
-------------------------------------------------
-------------------------------
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5272 | Comparators |
| — |
James & Lamson |
36" |
Needs Work |
Sold |
Photo /
More Info. |
| 36" Jones & Lamson Optical Comparator: Needs glass. |
|
| Ad # 5145 | Comparators |
| — |
Jones & Lamson |
PC-14 |
Good |
sold |
Photo /
More Info. |
| 14" Optical Comparator: 6"x18" table, mobile base, needs a new lamp. |
|
| Ad # 5022 | Miscellaneous Inspection Equipment |
| 98? |
General Inspection, Inc. |
Inductor |
Excellent |
SOLD |
Photo /
More Info. |
| Like new Thread Checker: Checks for threads using ultrasound
Will also check for mixed, similar parts
Compares to a given standard taught to the machine
Max. dia. 1-1/2" |
|
| Ad # 5020 | Comparators |
| 1993 |
ST Industries |
1470 |
Excellent |
SOLD |
Photo /
More Info. |
| Very nice Optical Comparator: Metronics Quadracheck 2000 control
14" screen
profile/surface checker
5"x16" table |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5019 | Heat Treat Ovens |
| — |
Grieve |
BIH-450 |
Good |
Sold |
Photo /
More Info. |
| Nice electric oven 475 Deg.Max: 30 kw Max Temp. 350-475 F
Rolling parts rack
End of cycle light
Timer built-in
Purge, exhaust, and blower cycles |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5163 | Forklifts / Lift Trucks (All Types) |
| — |
— |
— |
— |
sold |
Photo /
More Info. |
| Electric Man Lifts: Several lifts available. Half are Workforce XLT
CAT 23 models. Others are Travelers TV25 models.
All are in good working condition. All are battery
operated with built-in 110 volt chargers. 300lb.
capacity. Both models have GFCI outlets at the
platforms. Platforms are typically 19" x 24". All
models are chain-driven with stabilizing jacks on
bottom. The workforce models are 23' and the
Travelers are 25'. |
|
We found 11 matching ads. Now displaying the remaining 11 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5017 | Painting / Coating Equipment |
| — |
Grieve |
BIH-450 |
Good |
sold |
Photo /
More Info. |
| Electric powder coating oven: Nice sized oven
Inside dimensions listed
30kw, Max. Temp 350-475F
Rolling parts rack
End of cycle/In-use light
Built-in Timer
Purge,Exhaust,& Blower cycles |
|
| Ad # 5688 | Vibratory Equipment |
| — |
Harper |
# H-8 |
Good |
sold |
Photo /
More Info. |
| Harper Tumbling Barrel, "Harperizer", #H8:
|
|
| Ad # 5686 | Vibratory Equipment |
| — |
rosler |
FKS 35.1 A-2 |
— |
sold |
Photo /
More Info. |
| Rosler High Energy Deburring System FKS 35.1 A-2.- Complete: — |
|
| Ad # 5684 | Cleaning Equipment |
| 1980's |
Baron Blakslee |
— |
Fair |
sold |
Photo /
More Info. |
| —: — |
|
| Ad # 5689 | Cleaning Equipment |
| — |
— |
— |
— |
sold |
Photo /
More Info. |
| FJC Duel 15" SS drum screw type 3 bath parts washer: — |
|
| Ad # 5682 | Cleaning Equipment |
| 1998 |
Rosler |
— |
Excellent |
sold |
Photo /
More Info. |
| Rosler Finishing Machine: — |
|
| Ad # 5687 | Cleaning Equipment |
| — |
— |
— |
— |
sold |
Photo /
More Info. |
| Aqueous hot water washing system w/ oil separator: — |
|
| Ad # 5683 | Vibratory Equipment |
| 1995 |
Sintobrator |
EVF-08RD-M1 |
Good |
Sold |
Photo /
More Info. |
| intobrator Roll Flow Finishing System Model EVF-08RD-M1 : Polishing tub capacity = 190 Liters,
Max load volume = 100 liters - work piece & media. Max weight of media and work pieces = 250kg,
Tub rotation = 50-130 rpm,
2 magnetic separators,
Chain loader capacity = 115 liters,
Dressing equipment - 100 liter tank,
Nozzle & Hand valve,
Dust collector w/ cartridge filter,
Spot cooler included. |
|
| Ad # 5681 | Bead & Shot Blasters |
| 1998 |
Pangborn |
Model 6GN-1-6FPSC |
Very Good |
Sold |
Photo /
More Info. |
| Pangborn Shot/Sand Blaster: — |
|
| Ad # 5690 | Cleaning Equipment |
| — |
— |
— |
— |
sold |
Photo /
More Info. |
| Baron Blakeslee MLR480, ultrasonic part cleaner.: — |
|
| Ad # 5685 | Plating Equipment |
| — |
— |
— |
— |
sold |
Photo /
More Info. |
| PPE Modular selective bandoleer plating line.: — |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
