|
User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 2985 | Second Operation |
| 1998 |
Victor |
616 |
Good |
sold |
Photo /
More Info. |
| Victor Model 616 Second Operation Lathe: Spindle Capacity - 5C Round 1-1/16"
Spindle Capacity - 5C Hexagon 7/8"
Spindle Capacity - 5C Square 3/4"
Spindle Capacity - Step Collet 1-1/16" - 6"
Spindle Speed Range, Variable 230 - 3,500 RPM
Main Motor 2 / 1 HP, 220 Volt
Swing Over Bed 9"
Double Tool Cross Slide Travel 3-3/4"
Turret Slide Travel 4"
ID of Turret Head 5/8"
Coolant Tank Cpacity 3 Gallons
|
|
| Ad # 2986 | Miscellaneous / Special Lathes |
| 1952 |
Lodge & Shipley |
60", Type A-1 |
— |
Sold |
Photo /
More Info. |
| Lodge & Shipley Model 60" T-Lathe, Type A-1: Maximum Swing in Gap 60"
Maximum Distance - Face of Spindle to Carriage 20-7/16"
Spindle Hole 11-1/2"
Spindle Speeds (24) 4 - 225 RPM
Spindle Nose A1-20
Feed Ranges (55) 0.001 - 0.65 IPR
Carriage Travel - Left of Center 30"
Carriage Travel, Right of Center 16.25"
Cross Slide Travel 16"
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 2981 | CNC Parts and Accessories |
| 1998 |
Haas |
TRT-210 |
— |
Sold |
No Photo /
More Info. |
| Haas Model TRT-210 Two-Axis Tilting Rotary Table: Table Diameter 8.27"
Table Torque - Rotary B-Axis 210 ft-lbs.
Table Torque - Tilt A-Axis 200 ft-lbs.
Feed Rate - Rotary B-Axis 0.001 - 60 deg/sec
Feed Rate - Tilt A-Axis 0.001 - 50 deg/sec
Center Height 9.00"
Motor Type 1.5 HP DC Servo
Motor Drive 2:1 Timing Belt & Pulley Set
Operating Air Pressure 120 PSI
Power Requirement 115 VAC @ 15 Amps
Approximate Table Weight 735 lbs.
Approximate Control Weight 17 lbs.
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 2980 | Manual Mill, Parts and Accessories |
| — |
Pratt & Whitney |
30" Vertical |
— |
Sold |
No Photo /
More Info. |
| Pratt & Whitney 30" Vertical Motorized Rotary Table: Table diameter 30"
Center height distance from base 19 1/8"
Maximum table load capacity 1,200 lbs.
Table dial vernier graduations 2 seconds
(8) 5/8" radial t-slots
No. 40 M.M. taper center hole
|
|
| Ad # 2974 | Horizontal Boring Mills |
| 1977 |
Sacem |
MST-110 |
— |
Sold |
Photo /
More Info. |
| 4-3/8" Sacem Table-Type Horizontal Boring Mill: Spindle diameter 4-3/8"
Spindle taper ISO 50
Spindle traverse 35-1/2"
Vertical travel of spindle 63"
Cross travel 78-3/4"
Longitudinal travel w/o outboard support 83"
Spindle speeds (18) 6.3 - 1,260 RPM
Feed range (35) 0.001 - 0.5 IPM
Rapid traverse 78-3/4 IPM
Rotary table, built-in 49-5/8" x 55"
Rotary table weight capacity 17,600 lbs.
Metric pitch range (14) 0.25 - 12 mm
Whitworth pitches (14) 2 to 96 TPI
Spindle motor 25 HP
|
|
| Ad # 2976 | Engraving, Copying & Pantograph Equip. |
| — |
Deckel |
KF-1 |
— |
SOLD |
Photo /
More Info. |
| Deckel Model KF-1 Universal Copy Milling Machine (Pantograph): Duplicating Ratio (3-Dimensional) 1:1
Enlarging & Reducing Ratios 1:1.5 to 1:4
Working Area 18" x 16"
Maximum Distance, Spindle Nose to Table 15"
Tracer Pin / Copyholder Table 12"
Work Clamping Surface 18" x 18"
Master Clamping Surface 16" x 16"
Collet Capacity 3/4" or 2MT
Motor 1.5 / 1.75 HP
Spindle Speeds 60 - 20,000 RPM
Fixed Working Table, Clamping Area 9" x 25.5"
Range of Longitudinal Travel 11.75"
Range of Traverse Travel 7-7/8"
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 2964 | Surface Grinders |
| 1976 |
Parker-Majestic |
2-Z |
— |
Sold |
Photo /
More Info. |
| 6" x 18" Parker-Majestic Super Precision Hand Feed Surface Grinder: Table Travel - Longitudinal 18"
Table Travel - Transverse 6"
Cross Handwheel Graduations 0.0001"
Vertical Handwheel Graduations 0.001"
Vertical Travel - Table Top to Spindle Centerline 20"
Spindle Motor 1 HP
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 2963 | Turret Punch Presses-CNC |
| 1998 |
Boschert |
ELP-750-CNC-Z |
— |
Sold |
Photo /
More Info. |
| 60 ton Boschert CNC Punching Machine, Model ELP750CNC-Z: Main Motor 7.5 HP
Max. Depth Stop Range, Y-Axis 30"
Max. Side Stop Range, X-Axis 60"
Maximum Cutting Force 60 tons
Maximum Punching Diameter 4"
Maximum Sheet Thickness 1/2"
Maximum Sheet Weight 220 lbs.
Maximum Positioning Speed 600 IPM
Working Area - Each Side 30" x 60"
Stroke Length 0" - 1.181"
Stroke Sequence 80 / 180 SPM
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 2966 | Microscopes |
| 1995 |
OGP |
Avant 400 |
— |
Sold |
Photo /
More Info. |
| OGP Model Avant 400 Video Measuring System: - Version 10.67 Software
- Foot Switch
- Black & Whire MOS Camera, 649 x 491 Pixel Array
Travels 18" x 18" x 6"
Load Capacity 65 lbs.
Scale Resolution 0.00002"
Lens 2.5X with Zoom Attachment
Field of View 0.140"
Working Clearance 1.25"
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
