User SearchYour search results (if any) appear below in groups of 75 for each section.
Drilling & Tapping Equipment
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12138 | Single Spindle Drill Press |
|
Richards Electromatic |
|
Good |
sold |
Photo /
More Info. |
: Richards' Electromatic Super Diemaker Jig & Drill
230/480 V(3 Phase)
42 1/4" x 78"
Table is 42 1/4" x 51" |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12137 | Surface Grinders |
1984-11 |
Kent |
KGS-200 |
Good |
sold |
Photo /
More Info. |
6 x 12": Kent Surface Grinder
6 x 12" table
24" longitudinal travel
8" cross travel
Kent Model KGS-200 Horizontal Spindle Surface Grinder, 6" x 12" Rated Capacity, 24"" Longitudinal Table Travel, 8" Cross Table Travel, 14" Maximum From Spindle Centerline to Table Top, 6" x 13.75" Kanetcu Permanent Magnetic Chuck, 6" x 1/2" Maximum Wheel Capacity, Hand Feeds, Coolant Tank and Pump, One Shot Lubrication, Wheel Guard Wheel Dresser, 1-1/2 HP, Three Phase Motor and Controls
In good condition
15" x 6 1/2 travel
volts 220/440 |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15599 | Air Dryers |
|
Mokon |
KV2A0411 |
Good |
sold |
Photo /
More Info. |
: 2 dryers available
Std Mfr Specs (please verify):
Mokon’s heat transfer fluid based Full Range temperature control system offers a combination heating and cooling system all in one package. A Mokon heat transfer fluid system, combined with an Iceman chiller, integrates the benefits and features of both products into one compact,
self-supporting unit. The Full Range system is ideal for applications requiring
multi-zone control, processes requiring both heating and cooling and/or a wide variety of temperatures, or where water supply to a heat exchanger is not accessible. It is
available in multiple sizes, configurations, and a variety of cooling, heating and pumping capacities. The overall design provides for long-life, durability and accurate continuous process control. Traditional Mokon quality and craftsmanship can be found throughout, such
as nonferrous construction on the cooling loop and the incorporation of highly accurate microprocessor-based controls. All these features and more in a compact design with Mokon reliability built in! |
|
Ad # 15597 | Air Dryers |
|
Thoreson McCosh Tech 3 |
TD12 |
Good |
sold |
Photo /
More Info. |
: Thoreson McCosh
Tech 3
Model-TD12
S/N-203-60-02
std mfg specs below:
Your Thoreson - McCosh dryer was thoroughly tested prior to shipment and checked to
insure that its performance is up to specifications. Upon arrival in your plant, the unit should be carefully inspected for physical damage which might have occurred in transportation.
Should any damage be observed, it should be reported to the carrier at the earliest possible
time.
Dryers are held to the crate bottom with a Z bracket. The side panels must be removed
before the Z brackets can be removed. Use a hi-low or a lift to raise the unit off of the crate
bottom. We recommend that a person steady the unit while on the hi-low.
The dryer should be located as close as possible to the material drying hopper it will
service. This will minimize thermal and air flow losses. The unit should be placed on any
reasonable level area or platform. The unit should be connected to the power source
indicated on the model nameplate. If the return air temperature will be above 165
F/ 74
C,
than an After - Cooler should be installed into your unit.
This dryer is a triple desiccant bed unit which continuously removes moisture from the process air stream by adsorption. While two of the beds are adsorbing moisture from the process air, the third is being automatically recharged.
This unit is a re - circulating dryer, recycling the drying air from the material hopper through the desiccant beds. The regeneration air flow is completely independent of the process air flow. The only atmospheric air that enters the process system is a small quantity which may leak in via the material loading system, if present on the hopper. A process air filter and regeneration air filter are provided to prevent contaminates from reaching the desiccant material. |
|
Ad # 15596 | Air Dryers |
|
Arid-X Dri Air |
ARID-X18 |
Good |
sold |
Photo /
More Info. |
: Arid-X Dri Air
Model #ARID-X18
S/N D7571
208 Volts 20 amps
Single phase
std mfg specs below:
The ARID-X dryer series is a dual bed design that provides a
constant supply of dry air to the material hopper. While one
bed is removing moisture from the process air the other is
regenerating by heating the desiccant to a high temperature.
Once the regenerated bed cools down, the Zone Valve
switches the airflow, and the newly regenerated bed is used to
desiccate the process air stream. The saturated bed is now
regenerated in the same manner, completing the regeneration
cycle. The cycle is depicted Page 8.
The airflow design of the ARID-X dryers makes the
regeneration cycle more efficient because we utilize a small
amount of the desiccated process air rather than ambient air
to regenerate the desiccant bed. This reduces the impact of
the high moisture content of the ambient air, which would
contaminate the desiccant bed, and allows the dryer to attain
a lower dew point.
Dryer Controls
The ARID-X series can be supplied with the standard PLC
Control Module or the advanced Microprocessor Control
Module, while the HP4-X series is only available with the
Microprocessor Control Module.
The PLC Control module includes a PLC control board,
display board, temperature controller and touch pad that is
programmed for the drying cycle described above. The
controller, display board and touch pad indicate the machine
status, alarms, set points and allow you to enter operational
settings for the dryer. These are explained in more detail later
in this manual.
The Microprocessor Control Module is one of the most
sophisticated yet operator friendly controls on the market. It
has many more features than the PLC control module that
provide the operator with more control and operational
flexibility with the dryer. These features and the operating
instructions are covered in detail in the Microprocessor
Control Instruction Manual included with your dryer
2 dryers available |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15598 | Chillers / Freezers |
|
Budzar Ind. |
AC-10-FCB-48-SP |
Good |
sold |
Photo /
More Info. |
10: Standard Manufacturer's Specs:
Budzar’s ICE (Industrial Chilling Equipment) Portable Chillers with a Programmable Logic Controller (PLC) are built for top performance and
engineered for bottom line control.
Designed to circulate a fluid medium between 20° - 70° for a wide variety of industries—rubber, tire plastic, paper, food, metal and pharmaceuticals,
Budzar’s ICE Chillers are innovative, reliable and easily maintained.
Budzar’s ICE Chillers are constructed with a (PLC) Programmable Logic Controller. The PLC displays instrumentation information i.e.; pump discharge pressure and flow, compressor suction and discharge pressure as well as compressor pump status. The highly programmable PLC may be
customized to your process and software may be updated via a programming key or transferred directly from a personal computer. The PLC also displays troubleshooting information and identifies and adjusts to marginal operating conditions. Additional features include a remote set-point and alarm, retransmission as well as self-testing, sensor failures and diagnostics.
ICE Chillers are built to take the heat in industrial duty application. Their top
quality components will stand up to your process and plant environment. All components are non-proprietary. The best refrigeration components
available have been selected, including a scroll compressor. Each unit is factory tested prior to shipping to ensure top quality.
Capacity (nominal Tons)10
# of Compressors 1
Compressor HP 10
Cooling Capacity Control 0%-100%
Full Load Amp
115/1/60 -
230/3/60 44.4
460/3/60 28.1
Condenser
# of Fans 2
HP of Each 1/2
CFM 4900
Pump 1.5
HP 24/40
GPM/PSI 65
Reservoir Capacity (gal.)1"
Process Connection (npt)63
Dimension (in.)
Height 63
Width 33
Length 56.5
Shipping WT (lbs) 1000 |
|
We found 6 matching ads. Now displaying the remaining 6 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12168 | General Material Handling |
|
Big Joe |
2018-R5 |
Good |
sold |
Photo /
More Info. |
2000: Big Joe Pallet Lift
|
|
Ad # 12169 | General Material Handling |
|
Big Joe |
2018-R6 |
Good |
Sold |
Photo /
More Info. |
2000: Lift height 72" |
|
Ad # 12170 | General Material Handling |
|
Rol-Lift |
|
Good |
sold |
Photo /
More Info. |
1500: Rol-Lift Stacker
Capacity 1500
Lift 96"
12 Volt |
|
Ad # 12134 | Forklifts / Lift Trucks (All Types) |
|
Hyster |
W40XT |
Fair |
sold |
Photo /
More Info. |
4000: Hyster pallet jack
Battery Type
Battery Volt 24
Lift cap 4000
110 Volt charger included |
|
Ad # 12133 | Forklifts / Lift Trucks (All Types) |
|
Yale |
MPW060SCN1212748 |
Fair |
sold |
Photo /
More Info. |
6000: Yale pallet jack
12V type
110 volt charger included |
|
Ad # 12135 | General Material Handling |
|
Cascade |
|
Fair |
sold |
Photo /
More Info. |
7300 lb.: Roll clamp
7300 # capacity
Cat # 100F-RCP-052
Class IV
84" opening |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12167 | Cleaning Equipment |
|
Landa |
|
Good |
sold |
Photo /
More Info. |
: Landa Power Wash/Steam Cleaner
PSI-2200
3 phase 460 V
225 degreeF temp
Natural gas
MFG Part # 1.109-537.0
|
|
Ad # 12136 | Cleaning Equipment |
|
Hydro-Tek |
|
Fair |
sold |
Photo /
More Info. |
: Hydro-Tek Pressure Washer/Steam Cleaner
Natural Gas
3 Phase
3500 PSI 45 GPM
250 degrees
440,000 BTU
2 available
Hood included |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|