|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Mills & Machining Centers
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10288 | CNC Horizontal Boring Mills |
| 1986 |
Wotan |
HBM |
Good |
Sold |
Photo /
More Info. |
| travels: 70x , 49y, 57z.quill 24": travels: 70" X, 49"Y, 57"Z, 24" quill
cat 50 spindle
MDSI retrofited control software version: Open CNC 6.0
rotary table
programmable B axis
hardended ways
ballscrews on all axis
can do simultaneous milling, circle interpolation,
programmable speeds & feeds of table and spindle
gettys drives
power draw bar |
|
| Ad # 10287 | Vertical Machining Centers (VMC) |
| 1995 |
Haas |
VF-3 |
Very Good |
Sold |
Photo /
More Info. |
| 40x x 20y x 25z travels: Specification Description
Machine Age: 1995
Table Size: 48" X 18"
X-Axis Table Travel: 40"
Y-Axis Saddle Travel: 20"
Z-Axis Spindle Head Travel: 25"
Maximum Distance Spindle To Table: 4" - 29"
Rapid Traverse Rate: 551 IPM
Cutting Feedrate 300 IPM
Spindle Taper: CAT-40
Spindle Speeds: 7,500 RPM
Spindle Drive Motor: 15 HP
Automatic Tool Changer: 20 Positions
Tool Changh Time Tool to Tool 5.0 Sec
Tool Changh Time Chip to Chip 6.0 Sec
Maximum Tool Diameter: 3.5"
Maximum Tool Length: 9.34"
Maximum Tool Weight 12 LBS
Required Floor Space (Demensions) 112" X 108"
Maximum Tool Weight: 10,000 LBS
Equipped With:
HAAS CNC CONTROL RS232 PORTS 3.5" FLOOPY
no tooling included
geared head
programmable coolant
chip auger
|
|
| Ad # 10290 | Vertical Machining Centers (VMC) |
| 1997 |
Depo |
MCFV125 |
Very Good |
Sold |
Photo /
More Info. |
| travel: 50x, 23.7y, 30Z: travels: 50"X, 23.7"Y,30"Z
cat 50 taper
spindle rpm-6000
dual tool carousal 16 tools each-32 total
Heidenhein control: TNC-426
box ways
chiller
glass scales
no thru spindle
chip conveyor
coolant tank w/ pump
auto lube sys.
machines available 1997 |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10289 | Gun / Deep Hole Drills |
| — |
Taurus |
— |
Needs Work |
Sold |
Photo /
More Info. |
| table 96 x 60" travel-X77.9x, 40" y Z depth 71": drill depth 71", can do 84" drill
table 96 x 60"
travels: 77.9 x, 40" Y
coolant tank in cast bedmax dril dia: 1.25??
retrofitted w/ updated control in 2002
needs some minor work... |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 2726 | RAM / Conventional EDM Machines |
| 1985 |
Elox |
18-6636 CNC |
Good |
SOLD |
Photo /
More Info. |
| Elox EDM - RAM Type CNC: Table Size: X = 66 Y = 36 Z = 28
Travels: X = 36 Y = 15 Z = 18
50 Amp,Filter system,DC Servo motors,RS232 Port
Remote hand unit,10,000 table cap.
Bridge type system with the Y and Z axes on the bridge above the workpan.
DC drives on all three axes for automatic and simultaneous EDMing in any direction, orbital programming control in three planes, reciprocation on any axis in both directions and selectable inch or metric dimensioning.
Schneeberger-Type antifriction roller bearings for sensitive and accurate movements on the X, Y, & Z axes. Table movement is numerically controlled with a variety of table travels. All 3 axes use a DC motor driven recirculating ball leadscrew with pulse coder feedback. The CNC controller will execute program blocks of information from 3 possible sources; non-volatile bubble memory in MEM mode, paper or mylar tape in TAPE mode, or from manual instructions entered by operator on keyboard MDI mode. |
|
| Ad # 4441 | RAM / Conventional EDM Machines |
| — |
ELOX |
18.6636 |
Very Good |
Sold |
Photo /
More Info. |
| 66" x 36" ELOX CNC SINKER EDM: MACHINE DETAILS:
Table Size: 66" x 36"
Tank Size: 70" x 40" x 24"
Dielectric Height: 18"
Travels:
X: 35"
Y: 15"
Z: 18"
Z-Axis Pneumatically Balanced (Twin Cylinders)
Distance Table/Platten: 36"
Platten Size: 14" x 12"
Machine Only Dimensions: 80" x 100" x 130"
CONTROL DETAILS:
Type: GN 6 Series with touch screen menu for all EDM parameter Inputs
GENERATOR DETAILS:
Type M0II, B50S
Power: 50 Amp (peak)
Control/Generator Dimensions; 60" x 50" 66"
FILTER DETAILS:
Double Paper Filter Cartriges
Filter Unit Only Dimensions: 7' x 8.5' x 6'
|
|
| Ad # 4442 | RAM / Conventional EDM Machines |
| — |
ELOX |
12-6636 |
Very Good |
Sold |
Photo /
More Info. |
| 66" x 36" ELOX SINKER EDM: MACHINE DETAILS:
Table Size: 66" x 36"
Tank Size: 70" x 40" x 24"
Dielectric Height: 18"
Travels:
X: 35"
Y: 15"
Z: 12"
Pneumatically Balanced (Twin Cylinders)
Distance Table/Platten: 32"
Platten Size: 14" x 12"
Hydraulic Servo in Z-Axis
Flat Ways throughout
Machine Only Dimensions: 80" x 100" x 115"
GENERATOR DETAILS:
Type Astra MKII 50S (a later retrofit)
Power: 50 Amp (peak)
Controls include: On Time, Off Time, Polarity, power, sevo feeds, servo sensitivity, dither, pick up etc etc
Generator Dimensions; 30" x 66" x 72"
FILTER DETAILS:
Double Paper Filter Cartriges Integrated into the machine.
Seperate flushing line fine filter unit |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
