User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 7913 | Heavy Duty Large Lathe 24in. & over swing |
50's |
AMERICAN |
42in Raised |
Good |
Sold |
Photo /
More Info. |
50" x 120" Raised (11") American Heavy Duty Lathe: Swing Over Bed: 50", swing over cross slide: 36"
Distance Across Ways: 32"
Distance Between Centers: 120"
Center Raised By 11"
48" Diam. 4-Jaw Chuck without jaws but spacing is 6 inch between vertical parallel slots.
Spindle Speed Ranges:1- 157 rpm in 18 Stages
Inch Threading
Powered compound & cross feed
Heavy Duty Steadyrest
Headstock & tailstock raised to match up
HP-40
|
|
Ad # 7912 | Heavy Duty Large Lathe 24in. & over swing |
|
Bridgeford |
32 x 196 |
Good |
Sold |
Photo /
More Info. |
32" x 196" Heavy Duty American Lathe: Swing Over Gap: 32"
Swing Over Bed: 34"
Bed Width: 21"
Chuck: 23" diam., 4-Jaw
Hand Cranked Tailstock
Steady Rest
Spindle Speeds: 6.5 - 166 rpm in 9 stages
Inch Threading (Left hand and Right hand)
|
|
Ad # 7901 | Vertical Turret Lathe (VTL) |
60'S |
KING |
56 in |
Good |
sold |
Photo /
More Info. |
56" Table, 62" max swing --KING VTL: Max swing 62"
chuck Dia 56"
ram stroke-?
table is bearing type
turret head
Table Speed Range: 2.7 - 100 rpm in stages (gear driven)
Vertical Height Under Rail: 42"
Head Tiltable
no threading..
4 x Table/Chuck Clamps
Base Size: 7’ Wide x 12’ Deep x 12’ High
Overall Size: 14’ Wide x 13’ Deep x 12’ High
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12878 | Horizontal Boring Mills |
|
Lucas |
32 |
Good |
sold |
Photo /
More Info. |
4": lUCAS #32
4" LUCAS Horizontal Boring Mill
Spindle: 4"
mt#
OUTBOARD SUPPORT
Spindle Speeds: 7.5 - 33 rpm
Travels:
X = 32"
Y = 36"
Z = 12"
Table Size: 40" x 56"
Spindle to Tailstock (max) 72"
no tooling |
|
Ad # 7911 | Horizontal Boring Mills |
|
LUCAS |
32 |
Good |
sold |
Photo /
More Info. |
4" LUCAS Horizontal Boring Mill: LUCAS #32
4" LUCAS Horizontal Boring Mill
Table Size: 40" x 56"
Spindle: 4"
20"-4 jaw chuck included
Spindle MT #6
outboard support
Spindle Speeds: 7.5 - 33 rpm
Travels:
X = 32"
Y = 36"
Z = 12"
Spindle to Tailstock (max) 72"
no tooling |
|
Ad # 7911 | Horizontal Boring Mills |
|
LUCAS |
32 |
Good |
sold |
Photo /
More Info. |
4" LUCAS Horizontal Boring Mill: LUCAS #32
4" LUCAS Horizontal Boring Mill
Table Size: 40" x 56"
Spindle: 4"
20"-4 jaw chuck included
Spindle MT #6
outboard support
Spindle Speeds: 7.5 - 33 rpm
Travels:
X = 32"
Y = 36"
Z = 12"
Spindle to Tailstock (max) 72"
no tooling |
|
Ad # 7903 | Planer Mills |
50'S |
Rockford |
Hy-Draulic |
Good |
sold |
Photo /
More Info. |
44" x 121" Rockford Planer -single point: Rockford Planer-single point head type w/3 heads
Table: 44" x 121"
Travel 10ft x 44"
Distance Between Columns: 48"
Height Under Rail: 48"
main cylinder dia:7" stroke 10ft
cutting speeds variable:cant find
Twin Vertical Heads, each with tilt
Side Head with Swivel
Side Head Movement: 36" (approx)
Table Ways: "V" construction-in good condition
"V" Ways: 6" sides
heads are hydraulic can change feed rates , lift on back stroke
Main Drive Motor: 40 hp
Drive System: Variable Speed Hydraulic Drive table
no milling head
was in running condition when taken out of service |
|
Ad # 7903 | Planer Mills |
50'S |
Rockford |
Hy-Draulic |
Good |
sold |
Photo /
More Info. |
44" x 121" Rockford Planer -single point: Rockford Planer-single point head type w/3 heads
Table: 44" x 121"
Travel 10ft x 44"
Distance Between Columns: 48"
Height Under Rail: 48"
main cylinder dia:7" stroke 10ft
cutting speeds variable:cant find
Twin Vertical Heads, each with tilt
Side Head with Swivel
Side Head Movement: 36" (approx)
Table Ways: "V" construction-in good condition
"V" Ways: 6" sides
heads are hydraulic can change feed rates , lift on back stroke
Main Drive Motor: 40 hp
Drive System: Variable Speed Hydraulic Drive table
no milling head
was in running condition when taken out of service |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 7910 | Radial Drill Press |
|
AMERICAN |
Hole Wizard, 17 in |
Good |
sold |
Photo /
More Info. |
17" Column, 66" Radial Arm Drill: 17" Column, 66" Radial Arm Drill
Vertical Travel: 48"
Machine Base Table: 52" x 84"
Coolant Sysyem
Quil Dia: 3-1/16"
Quil taper # 5 MT |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 7904 | Cold Saws & Power Hack Saws |
1963 |
Wagner |
WK 12590-7 |
Very Good |
sold |
Photo /
More Info. |
48" Diam. Semi-Automatic Hydraulic Cold Saw : Saw Blade Diameter: 48"
Saw Kerf: aprox 3/16"
Hydraulic Feeds
Box Way Construction
Saw Blade Speed: 15,20,25,30,40,50,60 and 80 fpm
Saw Blade horizontal Travel: Approx 24"
Vise: Manually operated
Vise Opening: approx 18"
Vise Height: 10"
Vise Width: 16"
Material Top Support: approx 31" Height
Powere Roller Infeed (Bottom)
great for I-beams. pipe, structural steels |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|