User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 2512 | Turning Center 4 - 10 in. chuck |
1983 |
LEBLOND |
BARON |
Very Good |
Sold |
Photo /
More Info. |
LEBLOND MAKINO MODEL BARON 40 CNC: Control: GE 1050 HLX
Swing: 23"
Max. Turning Dia.: 13.5", Using 2" Dia. Boring Bars
Max. Center Distance: 30"
X Axis Travel: 15.75"
Z Axis Travel: 32"
Spindle Speeds: 25-2500 RPM
Hole Through Spindle: 3.062"
Turret Configuration: 18 Index Positions, 6 ID, 10OD
Motor HP: 40HP 15 Min, 30HP Continuous
Spindle Nose/Taper: A2-8
60 degree Slant Bed Design
12" 3 Jaw Chuck
Chip Conveyor
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 2445 | CNC Horizontal Boring Mills |
1968 |
GIDDINGS & LEWIS |
70-H5-T RETROFITTED IN 1993 |
Very Good |
SOLD |
Photo /
More Info. |
5" GIDDINGS & LEWIS 3-AXIS TABLE TYPE BORING MILL: 48" x 120" Tbl, 108" CT, 60" VT, 40HP, Rebuilt & Retrofit 1993, 60,000 lb. ... |
|
Ad # 2446 | CNC Horizontal Boring Mills |
1968 |
GIDDINGS & LEWIS |
70H6T RETROFITTED: 1989 |
Very Good |
Sold |
Photo /
More Info. |
6" GIDDINGS & LEWIS TABLE TYPE HORIZONTAL BORING MILL: 72" x 144" Tbl, X=132", Y=84", Z=36", 80,000 lb. Cap., 4" Ballscrews, Fanuc... |
|
We found 8 matching ads. Now displaying the remaining 8 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 2517 | Grinding Parts & Accessories |
|
STANDARD POLE |
4RC6E |
Very Good |
sold |
No Photo /
More Info. |
14" X 36" STANDARD POLE ELECTRO-MAGNETIC CHUCK : EQUIPPED WITH:
ELECTRO-MATIC REMOTE VARIABLE NEUTROFIER CONTROLLER
230/460 VOLT, 12.5 AMPS, 300 WATTS
|
|
Ad # 2484 | Cylindrical Grinders (O.D. & I.D.) |
1977 |
Landis |
3R |
Excellent |
SOLD |
Photo /
More Info. |
14" x 96" Landis 4R CNC Sendzimir Roll Grinder: SWING OVER BED: 14.7"
DISTANCE BETWEEN CENTERS: 96"
MAX WEIGHT OF ROLL: 1,500 LBS.
WHEEL SIZE: 18" X 2" X 5"
WHEEL HEAD HORSEPOWER: 7.5HP BALDOR AC VECTOR
WHEEL SPEEDS, VARIABLE: 400-2000 PROGRAMMABLE
WORKHEAD HORSEPOWER: 3HP BALDOR AC VECTOR
WORKHEAD SPEEDS, VARIABLE; 0-300 RPM PROGRAMMABLE
WORKHEAD TAPER: JARNO #14
TABLE TRAVERSE: 0-240 IPM PROGRAMMABLE
EQUIPPED WITH:
*HEIDENHAIN SCALE FEED BACK
*3 WORK REST, STANDARD
*BARNES COOLANT FILTRATION
|
|
Ad # 2487 | Cylindrical Grinders (O.D. & I.D.) |
1966 |
FARREL- GIUSTINA |
|
Very Good |
SOLD |
Photo /
More Info. |
REBUILT FARREL- GIUSTINA TWO WHEEL ROLL GRINDER : Max. Roll Dia., on center w/ full size wheel 50” Solid
Max. Roll Dia., above centerline (11”) 63”,
Min. Roll Dia., ground on centerline 8”
Nominal Roll Face ground 367”
Max. Carriage traverse 390”, Optional up to 700”
Max. Crown/Concavity of roll unlimited
Max. weight of roll supported by bed 90 ton
Work speeds, rpm, programmable .2 – 35 rpm
Work Motor, Baldor AC Vector, with dynamic braking 60 hp, 1180/3600 RPM
Feedback GE/Fanuc encoder
Grinding Wheel Dia., std. 20”
Grinding Wheel Face, std. 3”
Spindle speed range, bi-directional, programmable 233–1400 rpm
Grinding wheel motors, Baldor AC Vector 30 hp, 1180/3600 rpm
Carriage Speed, programmable 0–80 ipm
Carriage Motor, GE/Fanuc Servo 7.3 kW 2000 rpm
Carriage Gearbox, Cone Textron 25:1
Over all width of each way 7 ¾”
Over all length of carriage 88”
|
|
Ad # 2485 | Cylindrical Grinders (O.D. & I.D.) |
1967 |
FARREL |
|
Very Good |
sold |
Photo /
More Info. |
REBUILT FARREL TWO WHEEL ROLL GRINDER : Max. Roll Dia., on center with full size wheel 42” Solid 57"
Max. Roll Dia., above centerline (11”) 63" 78"
Min. Roll Dia., ground on centerline 8" 12"
Nominal Roll Face ground 316"
Max. Carriage traverse 340" up to 700"
Max. Crown/Concavity of roll unlimited
Max. weight of roll supported by bed 90 Ton
Work speeds, rpm, programmable .2 – 35 rpm
Work Motor, Baldor AC Vector, with dynamic braking 60 hp, 1180/3600 RPM
Feedback GE/Fanuc encoder
Grinding Wheel Dia., std. 20”
Grinding Wheel Face, std. 3”
Spindle speed range, bi-directional, programmable 233 – 1400 rpm
Grinding wheel motors, Baldor AC Vector 30 hp, 1180/3600 rpm
|
|
Ad # 2483 | Cylindrical Grinders (O.D. & I.D.) |
50's |
CINCINNATI SENDZIMIR |
LR |
Good |
Sold |
No Photo /
More Info. |
14” X 72” CINCINNATI SENDZIMIR CNC ROLL GRINDER: Swing Over Bed: 15 ½”
Max. Roll Length: 102 ½”
Max. Roll Weight: 6500 Lbs.
Workhead Type: Dead
Workhead Speeds, Programmable: 0-300 rpm
Max. Grinding Wheel Size: 24” x 2” x 12” Standard
CNC System: KPM 5
Infeed Screw: Ballscrew
Footstock Type Handwheel
Footstock Center: #13 B&S
rebuilt 90-91
|
|
Ad # 2459 | Cylindrical Grinders (O.D. & I.D.) |
1965 |
FARREL |
|
Needs Work |
sold |
No Photo /
More Info. |
REBUILT FARREL TWO WHEEL ROLL GRINDER: Max. Roll Dia., on center with full size wheel 48” Solid
Max. Roll Dia., above centerline 60”
Min. Roll Dia., ground on centerline 8”
Max. Roll Face ground 280”
Max. Carriage traverse 305”
Max. Crown/Concavity of roll .400”
Headstock:
Work speeds, rpm, programmable 4 – 24rpm
Work Motor, GE D.C. 20 hp, 400/1600 RPM
D.C. Drive Allen Bradley 1395
Wheelheads:
Grinding Wheel Dia., std. 20”
Grinding Wheel Face, std. 3”
Spindle speed range, bi-directional, programmable 700 – 1400 rpm
Grinding wheel motors, GE D.C. 15 hp
D.C. Drives Allen Bradley 1395
Carriage:
Carriage Speed 2 - 60 ipm
Carriage Motor 3 hp D.C.
D.C. Drive Allen Bradley 1395
Traverse screw diameter 4 5/8”
Carriage Ways, center to center 66”
Over all width of each way 7 ¾”
Over all length of carriage 88”
|
|
Ad # 2455 | Cylindrical Grinders (O.D. & I.D.) |
1988 |
TOSHIBA/SHIBAURA |
SENDZIMER |
Very Good |
SOLD |
No Photo /
More Info. |
TOSHIBA/SHIBAURA SENDZIMER ROLL GRINDER: Max. diameter to be ground: 5"
Max. crown and concavity on diameter: 0.02"
Swing over Table Maximum: 7.8"
Swing over Bed Maximum: 8.46" (215mm)
Max. weight between centers: 33 lbs.
Max. Overall Roll Length: 57" w/Long Center, 60" w/Short
Max. Roll Weight: 440 lbs.
HEADSTOCK:
Speed of work (continuous): 60-300
Work Center Size: 31.2" (1.22)
Drive Capacity (roll weight x journal diameter): 330lb. x 5"
TABLE:
Traverse speed (continuous): 2" - 200 min
WHEELHEAD:
Wheel speed (continuous): 600 - 1,800 rpm
Wheel size (diameter x width x hole): 14" x 1.5" x 5"
|
|
Ad # 2456 | Cylindrical Grinders (O.D. & I.D.) |
1970 |
CINCINNATI |
LR, 1970 |
Needs Work |
SOLD |
Photo /
More Info. |
14” X 168” CINCINNATI SEMI AUTOMATIC ROLL GRINDER : Max. Swing over Table: 15 1/2"
Max. Weight of Rolls on Centers: 6500 lbs.
Max. Weight of Rolls on Journal Rests: 6500 lbs.
Max. Camber on diameter: 040" std.
Nominal Distance Between Centers: 168"
WHEELHEAD
Max. Crossfeed: 11"
Grinding Wheel, std.: 24" x 2" x 12"
Grinding Wheel Spindle Speeds,variable: 500-1200rpm
Spindle Bearings, Filmatic: 5 shoe
HEADSTOCK
Work Speeds, Variable: 38-136 rpm
Taper in workhead: 13 B&S
FOOTSTOCK
Taper in footstock spindle: 13 B&S
TABLE
Table Traverse, variable: 3 - 120 IPM
Hand Table Traverse: 1/8" per rev.
Table Type: One Piece
CROSS TRAVERSE & SIZING
Wheelhead movement per rev. of handwheel: 1/16"
Min. infeed increment on dia.: 0001"
Auto. pickfeed at table reversal Max: 0012"
Minimum: 0002"
Power Cross Traverse Rate: 16 IPM
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|