User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 4 matching ads. Now displaying the remaining 4 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10505 | Vertical Turret Lathe (VTL) |
|
Schiess |
1.4 M VTL DKE 100 |
Good |
Sold |
Photo /
More Info. |
Schiess Model " Manual VTL:1.4 M VTL DKE 100, 54'' Max Dia: SCHIESS VTL
Model 1.4 Meter - DKE 100
S/N #378794 NEW:
SPECIFICATIONS:
Max. Cutting Force Diameter 54"
11,440 lbs
Max Weight of Workpiece 8 tons
18 Table Speeds (approx) progressive ration 1, 25 6. 3-315 RPM
24 Feed Rates Per One Table Revolution .0012 - .2480 IPR
Rapid Traverse 78 IPM
Fine Feed I 12. 3/8 IPM
Fine Feed II 1 1/4 IPM
|
|
Ad # 10495 | Turning Center 4 - 10 in. chuck |
1996 |
Okuma |
LU-15 |
Good |
Sold |
Photo /
More Info. |
Okuma Model LU-15 4-Axis, CNC OSP7000L Control 10" 3-Jaw Chuck: OKUMA CNC 4-AXIS LATHE
Model:LU-15 S/N
NEW: 1996
Specifications:
Capacity:
Swing Over Bed 20.87"
Swing Over Carriage 14.96"
Swing Over Cross-slide 12.99"
Max Turning Diameter 10.62"
Max Turning Length 23.62"
Axis Travel:
X Axis (upper/Lower) 10.24"/5.51
Z Axis (upper/Lower) 25.20"/24.21"
Headstock & Main Spindle:
Spindle Nose JIS-A2-8
Spindle Diameter at Front Bearing 4.72"
Spindle Bore Diameter 3.15
Internal Taper 1/10
Spindle Speed Range 75-3800
Number of Spindle Speeds Auto 2
Upper Turret:
Type and No of Tool Stations V12 Slotted
Tool Size OD type 1"x1"
Max ID Bar 1.50" Dia
Turret Size (dia) 14.17"
Size of Index Coupling 7.09"
Turret Clamping Force 6,173 lbs
Turret Index Time 0.2 Sec/Station
Lower Turret
Type and No of Tool Stations V8 Slotted
Tool Size OD type 1"x1"
Max ID Bar 1.50" Dia
Turret size (dia) 14.17"
Size of Index Coupling 7.09"
Turret Clamping Force 6,173 lbs
Turret Index Time 0.2 sec/station
Feedrates
Rapid Traverse Speed
X Axis 590 IPM
Z Axis 787 IPM
Cutting Feedrate
X and Z Axis Cut Feed Rates 0.0001"to40.000 IPR
Main spindle drive motor: VAC 30/20 hp
Power: 39 KVA 220V, 3Ph, 60hz
Floor space requirement 156" x 83" x 76"H
Net Weight: 11,660 lbs.
Machine Also Equipped With:
*Chip Conveyer - Coolant Tank
*12 Position Upper and * Position Lower Turret
*Control OSP7000L CNC Cotrol
*10" 3-Jaw Chuck - Hydraulic Tailstock
|
|
Ad # 10496 | Turning Center 11 in. & over chuck |
2005 |
Okuma |
Captain L-470 |
Good |
Sold |
Photo /
More Info. |
Okuma Model Captain L-470, 2-Axis CNC Lathe: OKUMA Captain
L470/1250 2-Axis CNC Lathe
has 5,455 cutting hrs as of 4-25-11
NEW:2005
Basic Equipment
SMW 12" Hydraulic Powered 3 Jaw Chuck, Quick Change Jaw 12"
Round Bar Stock Capacity 3.469" Dia
SMW Steady-Rest (.591" min dia to 6.692" max dia)
Tailstock(Quill Stroke w/ MT5 Revolving Center 5.90"
12 Station Turret - I.D. or O.D.)
Coolant Thru Tool Blocks
Chip Conveyor (Jorgensen)
Okuma OSP-E100L CNC Control
Part Envelope
X-Axis (upper/lower) Travel 11.81"
Z-Axis (upper/lower) Travel 50.19"
Maximum Turning Diameter 16.54"
Maximum Turning Length 49.20"
Maximum Swing Over Bed 24.41"
Maximum Turning Length 49.20"
Maximum Swing Over Bed 24.41"
Maximum Swing Over Saddle 18.90"
Maximum Turning Length 49.20"
Maximum Chucking Diameter 10 1/2"
Power and Speed
Spindle Motor 30HP
Spindle Ranges 2(low/high)
Spindle Speeds 50-3,000 RPM (cont)
Tool Holders
Tool Shank O.D. 1" square
Boring Bar Shank 1.50" Dia
Machine Weight 16,720 lbs
Jib Hoist Capacity 4,000 lbs
Coolant Tank Capacity 60 Gallons
|
|
Ad # 10461 | CNC Lathe w/sub Spindle or Live Tooling |
|
Hardinge |
CONQUEST T-42 S/N SG-538 |
Good |
sold |
Photo /
More Info. |
Hardinge Model T42 Conquest CNC Lathe : HARDINGE CNC LATHE
Model: CONQUEST T-42 S/N SG-538
SPINDLE NOSE (ANSI) A2-5", 16 C
BAR CAPACITY 1.625"
SPINDLE MOTOR 10 HP (AC)
TORQUE RATING 42 FT-LB
SPINDLE SPEED 50 TO 5,000 RPM
SWING DIAMETER OVER UPPER WAY COVER 21.2"
X-AXIS TRAVEL 5.31"
X-AXIS RAPID TRAVERSE 472 IPM
Z-AXIS RAPID TRAVERSE 630 IPM
UPPER TURRET 12 STATIONS(6 LIVE OPT.)
LOWER TURRET 6 STATIONS
MAX TURNING DISTANCE 13.8"
LIVE TOOLING:
HORSEPOWER 2.4 HP
SPEED RANGE 0 TO 4,000 RPM
EQUIPPED WITH:
GE FANUC 18T CNC CONTROL
CHIP CONVEYOR
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10475 | Planer Mills |
|
Ingersoll |
90*84*204 |
Good |
Sold |
Photo /
More Info. |
Ingersoll Model 90'' x 84'' x 204'' Double Housing Planner Mill : INGERSOLL PLANER MILL
90" x 84" x 204"
DOUBLE HOUSING S/N # NEW:
SPECIFICATIONS:
Max. Distance Between Housings 90"
Height Under Rail 84"
Table Size 76" x 204"
Table Travel 180"
Quill Diameter 10"
Quill Stroke (Feed) 12"
Spindle Speeds 15-615 RPM
Machine Equipped With:
* Pendant Controls
* Quill Feeds
* Power Draw Bar
* Hardened Ways
(1) 75 HP Vertical Rail Head
(1) 75 HP Horizontal Side Head
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10531 | Horizontal Band Saws |
|
Wellsaw |
8 M |
Good |
sold |
Photo /
More Info. |
Wellsaw Bandsaw: Wellsaw Band Saw Model 8M |
|
We found 5 matching ads. Now displaying the remaining 5 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10509 | Surface Grinders |
|
Thompson |
Type D 6"x18" |
Good |
Sold |
Photo /
More Info. |
Thompson Model 6" X 18", Surface Grinder: Thompson Surface Grinder,Type D, 6" X 18"
Table size (Magnetic) 6" X 18"
Grinding Wheel Dia 5'
Longitudinal Travel 20"
Work height under 5" wheel 16"
Spindle speed 3600 RPM
Power 1 HP
-60cylce/3 phase
Weight 2,000 lbs
|
|
Ad # 10504 | Vertical Spindle - Blanchard Type |
1997 |
Schaffer |
RPVR84 |
Good |
Sold |
Photo /
More Info. |
Schaffer Model RPVR, 84'' Vertical Spindle Rotary Grinder: Schaffer 84" Vertical Spindle Rotary Grinder
MODEL #RPVR 84 S/N # NEW: 1997
Machine Specifications - Vertical Spindle
Chuck Diameter 84"
Maximum Swing Inside Guards 96"
Maximum Grinding Height (new segments) 40"
Diamter of Grinding Wheel 46"
Spindle Speed 382 RPM
Main Motor 200 HP
Vertical Feeds (24 Steps) 0.004-0.100
Vertical Rapid Feed 11.96 in/min
Maximum Table Load 13,85 lbs
Table Speed Four Steps 6-16 RPM
Machine Size (l x w x h) 232"x122"x193"
Weight (approximate) 79,000 lbs
Machine is equipped with:
*Pendant Control
*Load Meter
*Separate Electrical Controls
*Electronic Nuetrofier
*Automatic Lubrication System
|
|
Ad # 10497 | Tool & Cutter Grinders |
1998 |
Record |
|
Good |
sold |
Photo /
More Info. |
Rekord Saw Blade Grinder: Equipment: Saws
Model: Rekord Saw
Description: Rekord Saw Blade Grinder
Reference #: 2016
|
|
Ad # 10465 | Cylindrical Grinders (O.D. & I.D.) |
|
Heald |
273A |
Good |
Sold |
Photo /
More Info. |
Heald Model Internal Grinder : HEALD INTERNAL GRINDER
Model: 273A S/N 62549
Maximum Swing Inside Table 24.5"
Swing Inside Standard Chuck Guard 20"
Swing W/ Workhead at 90 Degree 13"
Bore Length Ground, Maximum 16"
Grinding Stroke, Minimum .125"
Grinding Stroke, Maximum 16"
Table Longitudinal Travel 20"
Wheelhead Cross-Slide Travel 1.5"
Workhead Positioning Slide Travel 17.5"
Workhead Swivel Angle, Maximum 90 Degree
Grinding Spindle Speeds, Range 0-500 RPM
Grinding Table Speeds, Infinite Variable 0-18 FPM
Power Rapid Table Traverse 18 FPM
5 HP 3500 RPM Grinding Spindle Motor
1.5 HP 3600 RPM Workhead Chuck Motor
0.5 HP Hydraulic Motor
|
|
Ad # 10464 | Cylindrical Grinders (O.D. & I.D.) |
1978 |
Heald/Cincinnati |
272 "SIZEMATIC" |
Good |
Sold |
Photo /
More Info. |
Heald/Cincinnati Milacron 272 SISEMATIC, INTERNAL GRINDER: HEALD/CINCINNATI MILACRON
MODEL #272 "SIZEMATIC" S/N 60895 NEW: 1978
INTERNAL GRINDER
CATALOGUE SPECIFICATIONS:
Swing Over Table, Maximum 18"
Bore Diameter Ground, Minimum .125"
Bore Diameter Ground, Maximum 5.5"
Bore Length Ground, Maximum 12"
Table Longitudinal Travel 30"
Hole Thru Workhead Spindle, Diameter 1.59"
Grinding Angle, Maximum Included 60-DEGREES
Workhead Spindle Speeds, Range 133 TO 400 RPM
Grinding Table Speed, Infinite 0 TO 20 FPM
Power Rapid Table Traverse 35 FPM
Wheel Wear Compensation, Range 0 TO .004"
Power Cross Feed On Diameter, Max .042"
Grinding Spindle Motor, Horsepower 5 HP/3500 RPM
Workhead Chuck Motor, Horsepower 3/2/1.5/1
Workhead Chuck Motor, RPM 1770/1175/885/575
Electrical System 440/3/60
Overall Dimensions, W X D 11' X 7'
Overall Height 7'
Weight, Approximately 8000 LBS
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10535 | Power Squaring Shear (Hydraulic) |
2005 |
Betenbender |
8' x 3/16" |
Very Good |
SOLD |
Photo /
More Info. |
8' x 3/16" Shear: NC Control 5 Station" Go-To", Solid Table Top-Segments
One Shot Lube, 48" Support Arms/Front Gauges, New Paint
|
|
Ad # 10536 | Power Squaring Shear (Hydraulic) |
2008 |
Betenbender |
8' x 10ga |
Excellent |
sold |
Photo /
More Info. |
'08 Betenbender 8' x 10ga Shear: 15hrs on machine
NC Control 5 Station" Go-To", Solid Table Top-Segments
One Shot Lube, 48" Support Arms/Front Gauges
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10533 | Press Brakes (Hydraulic) |
80's |
Bentenbender |
BSI 6' x 95 ton |
Very Good |
sold |
Photo /
More Info. |
Betenbender/BSI 6' x 95 Ton PRESS BRAKE: All New Electrical including 15HP Motor, Footswitch, Enclosure & Switch Bra... |
|
Ad # 10534 | Press Brakes (Hydraulic) |
|
Bentenbender |
8' x 70 ton |
Very Good |
Sold |
Photo /
More Info. |
Remanufactured Betenbender 8' x 70 Ton Press Brake: All New Electrical including 10HP Motor, Footswitch, Enclosure & Switch Bra... |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10454 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1974 |
Bertsch |
MODEL #14 |
Good |
sold |
Photo /
More Info. |
1-1/8" x 3': Bertsch Initial Pinch Plate Bending Roll
MODEL #14 S/N #M-10210 NEW 1974
SPECIFICATIONS:
Bending Capacity 1 1/8" x 3'
Bending Roll Diameter 10"
Main Drive Motor 40 HP
Rear Roll Adjusting Motor 25 HP
Weight (approx) 37,100 lbs
Machine is equipped with:
* Operators Console Station
* Air Drop End
* Power Rear Roll Adjustment
* Power Front Roll Adjustment
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10512 | Cleaning Equipment |
|
ADF |
800 |
Good |
Sold |
Photo /
More Info. |
ADF Parts Washer : 32"W x 11" H basket size: ADF 800 SYSTEM FLUSHER PARTS WASHER
MODEL #800 S/N # NEW:
SPECIFICATIONS:
Basket Size 32"
Part Height, Max 11"
Motor Horsepower 5 HP
Electrical System 460/3/60
EQUIPPED WITH:
|
|
Ad # 10500 | Cleaning Equipment |
|
Roto Jet of America |
5 |
Good |
Sold |
Photo /
More Info. |
Roto Jet of America AUTOMATIC PARTS WASHER, 69" Diameter Table : ROTO JET OF AMERICA AUTOMATIC PARTS WASHER
SPECIFICATIONS:
Basket Size 48"x44"
Work Table Diameter 69"
* FRONT LOAD TYPE
* 475 GALLON CAPACITY
* HEATING CAPACITY 64 KW
* EMPTY WEIGHT 3,100 LBS.
* LOAD CAPACITY 1,000 LBS.
* POWER 460V, 3PH, 60 Hz, 100 AMP
|
|
Ad # 10483 | Cleaning Equipment |
|
ADF |
800 system |
Good |
Sold |
Photo /
More Info. |
ADF 800 SYSTEM FLUSHER PARTS WASHER: ADF 800 SYSTEM FLUSHER PARTS WASHER
MODEL #800 S/N # NEW:
SPECIFICATIONS:
Basket Size 32"
Part Height, Max 11"
Motor Horsepower 5 HP
Electrical System 460/3/60
Have 4 units available
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|