User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13580 | Miscellaneous / Special Lathes |
|
Levin |
ABHE |
Excellent |
sold |
Photo /
More Info. |
4" Swing: Levin Miniature / Micro-Miniature Precision
Watchmaker's Lathe
Country of Manufacture: Switzerland
Frame: Type ABHE, Serial No.: C05038
6-Position Turret Tailstock Assembly, Type
ABIA, Serial
No.: J01221
Swing: 3.94"
Compound Cross-Slide attachment (see pictures)
Tailstock attachment with drill chuck (see
pictures)
Precision drilling attachment (see pictures)
Tooling: 3-Jaw Chuck, 4-Jaw Chuck, collets,
collet
chuck, drill chuck, cutting insert holders,
miscellaneous
(see pictures)
Manuals available with purchase.
Features and Tooling:
- Machine is set up with the deep hole
drilling device
which the tail stock spindle is driven through
an
over arm belt system.
- Production turret and a standard tailstock.
- The taper turning compound and a standard
compound is on the table along with a steady
rest.
- Type D and the WW Collets
- 1/4 inch hex
- 3 Jaw Scroll Chuck
- Turret Attachment
Excellent condition (see pictures, more
pictures
available upon request)
This machine is available for inspection.
Quoted fob; Buyer responsible for freight and
logistics.
Buyer to verify all specifications and options
of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
Ad # 15316 | Miscellaneous / Special Lathes |
|
Hardinge |
DSM-A Turret Lathe |
Good |
sold |
Photo /
More Info. |
2-3/8" Turret Work Stroke: Automatic Turret Lathe
Manufacturer: Hardinge
Model: DSM-A
Electrics: 460 Volt/3 Phase/60 Cycle
Spindle Motor: 4.1 HP
Spindle Speeds: 12, Ranging from 250 - 4200
RPM
Spindle Capacity: 1-1/16" with 5C Collets
Full Load Amps: Machine - 9.2 / Spindle Motor
&
Hydraulic Pump - 3.6
5C Collet Spindle (see attached brochure for
tooling
specifications)
Hydraulic Tank: 5 US Gallons
Turret Work Stroke: 2-3/8"
Wt: 2800 lbs (approximate)
Dimensions: 81" long x 40" wide x 67" tall
(approximate)
On-Line Link to DSM-A Brochure w/
Specifications,
Capacities, etc:
http://www.sterlingmachinery.com/db-
files/hardinge%20bar%20&%20second%20operation
%20automatic%20dsm-a%20brochure.pdf
Buyer responsible for freight logistics and
expenses.
Seller agrees to load equipment on Buyer's
truck.
Equipment is NOT under power; available for
inspection.
Buyer to verify all specifications and
options of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15176 | Horizontal Mills |
|
Cincinnati |
Hydro-Mtic 4-36 |
Good |
sold |
Photo /
More Info. |
48 x 18: Manufacturer - Cincinnati
Model: Hydro-Matic Duplex Horizontal Mill, 4-
36
Age, Serial No.: Unknown
Spindle Speeds: 15 - 113 RPM
Table: 48 x 18
Dimensions: 7' x 8'
Weight: Estimate 7,000 - 8,000 lbs
Condition: Has been taken out of production
and is
now surplus; machine is operational; no
tooling comes
with machine; pictures are indicative of what
comes
with machine.
Machine is not under power and available for
inspection.
Buyer responsible for freight logistics and
expenses.
Seller agrees to load equipment on Buyer's
truck.
Buyer to verify all specifications and options
of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
Ad # 15170 | Knee Mills (Bridgeport Type) |
|
Chevalier |
FM-3VS |
Good |
sold |
Photo /
More Info. |
9 x 48: Chevalier Knee Mill
Model: FM-3VS
Serial No.: BM 854325
Table: 9" x 48"
Travels: 30/12/16 (X,Y,Z)
Variable Speed Drive: 60 - 4500 RPM
Head Overarm Swivel: 360 deg
Head Swivel (R-L): 90 deg
Head Swivel (F-B): +45 / -38 deg
Quill Travel: 5"
Anilam Wizard 111, 2-Axis DRO
X-Axis Power Feed Attachment
Jacobs Drill Chuck
Electrics: 230/460 Volt/3 Phase/60 Cycle/
Spindle Motor: 3 HP
Dimensions: 87 x 63 x 83
Weight: 2,400 lbs
Machine is not under power and available for
inspection.
Buyer responsible for freight logistics and
expenses.
Seller agrees to load equipment on Buyer's
truck.
Buyer to verify all specifications and options
of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15172 | Radial Drill Press |
|
American Tool Works Comp. |
|
Good |
sold |
Photo /
More Info. |
11" x 4': Radial Drill
Manufacturer: The American Tool Works Company
Spindle Speeds: 32 - 1240
Serial No.: 65110.A
Arm: 4'
Column: 11"
Table: 18" x 18"
Electrics: 440 Volt, 3 Phase, 60 Hz
See pictures of plates on attached files for
speeds &
feeds.
Is currently under power and available for
inspection.
Physical location is in Central, Oregon,
within 30
minutes of Bend.
Buyer responsible for freight logistics and
expenses.
Seller agrees to load equipment on Buyer's
truck.
Buyer to verify all specifications and options
of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15320 | Pipe, Tube & Bar Cut Off (Production) |
2009 |
Elumatec |
KS 101/23 |
Good |
sold |
Photo /
More Info. |
2.4" depth x 4" height: Elumatec
Made in Germany
KS 101/23
Serial No.: 1012331601
3/PEN/240 V/60 HZ/1800W
RPM: 3400 RPM
Mfg. Date: 2/2009
Manufacturer's Website Link:
https://www.elumatec.de/fileadmin/data/corporat
esite/p
df/en/products/elumatec_KS101.pdf
You Tube Video Showing this Model Saw in
Operation:
https://www.youtube.com/watch?v=av4EEvGjoHs
Buyer responsible for freight logistics and
expenses.
Seller agrees to load onto Buyer's
transportation; I have
the ability to deliver in OR/WA.
Equipment not under power and available for
inspection.
Quoted fob Seller's shop in Portland, OR.
Buyer to verify all specifications and
options of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15330 | Surface Grinders |
1990's |
Chevalier |
FSG-2440TX |
Excellent |
sold |
Photo /
More Info. |
24 x 40: Chevalier Surface Grinder
Model: FSG-2440TX
Age: Circa Early 1990's
Size: 24 x 40
Wheel Diameter: 16"
Walker Magnetic Chuck
Coolant tank with paper filter
Manuals available
Main Machine (dimension and weight straight
out of
machine manual):
...Dimensions: 180" Long x 134" Wide x 108"
Tall
...Weight: 15,000 lbs
Filter (separate):
...Dimensions: 5.5' x 4.5'
...Weight: 100 lbs (estimated)
Hydraulic Power Unit:
...Dimensions: 3' x 6'
...Weight: 200 lbs (estimated)
Rigging (moving out of building and loading
on Buyer's
truck): $2,660
These videos were taken in the current
owner's shop
on 5/31/16 showing the spindle turning and
the
machine moving in X, Y, and Z. Machine is in
excellent
working condition:
Video Link #1:
https://www.youtube.com/watch?
v=khM8zQcDeSM
Video Link #2:
https://www.youtube.com/watch?
v=zJ7GbeNy2Aw
Machine is under power; equipment available
for
inspection.
Buyer responsible for freight logistics and
expenses.
Seller agrees to load equipment on Buyer's
truck.
Fee may be charged for rigging.
Buyer to verify all specifications and
options of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
Ad # 15179 | 3 Axis Fully Automatic Surface Grinder |
1978 |
Mattison |
|
Good |
sold |
Photo /
More Info. |
20 x 48: Mattison Surface Grinder
OEM - Mattison Machine Works, Rockford, IL
Serial Number - 23866
Electro-Magnetic Chuck - 20" x 48" x 5-1/2"
Table (3) T-Slot, Longitudinal Movement by
Hand and
Power
Working Surface: 20" x 53-1/2"
Longitudinal Movement of Table: 48"
Power Speed Adjustable: 30 to 100 fpm
Grinding Wheel Assembly:
Transverse Movement Wheel Slide - 24"
Vertical Slide Movement - 25"
Incremental Down-Feed
Centerline of Spindle to Top of Table - 35-
1/4" / Top of
Chuck - 30"
Grinding Wheel: 20" x 3" x 5"
Motor Drives:
Spindle - 15 HP
Hydraulic Pumps - 7-1/2 HP
Feed - 1-1/2 HP
Coolant Pump - 1 HP Controls: On/Off and
Reset
Buttons for all functions,
including feeds and speeds.
Equipped with (1) Stone Dresser, Hydraulic /
Coolant
Pump and Reservoir / Wheel Load Meter
Complete Factory Safety Guards
Electrics - 460/3 Phase/60 Hz
Control Voltage - 120
Total Horsepower - 24.5
O/A Dimensions - 14.5' x 8' x 10' Tall
See attached pictures for Serial Number and
Electrical
Specification plates.
Machine has been reconditioned, hence the
machine
wrapping.
The chuck is protected with lube/oil and is
covered with plastic film.
The entire machine is in excellent, like-new
condition.
From my research, Bourn-Koch, Inc. supplies
Mattison
parts and all the original hydraulic and
electrical
schematics for this machine in addition to
the
operations and parts manuals:
http://www.bourn-
koch.com/home/cnc_machine_parts/mattison_mattis
o
n_hanchett_18.html
This machine is available for inspection;
machine NOT under power
Quoted fob Seller's yard; loading fee may
apply
Buyer responsible for freight and logistics
Buyer to verify all specifications and
options of equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment.
The goods are sold in an "As Is, Where Is"
condition.
The seller warrants that the goods are free
and clear of all liens, indebtedness, or
liabilities.
SUBJECT TO PRIOR SALE. |
|
Ad # 15177 | Tool & Cutter Grinders |
1994 |
Oliver Instrument Company |
700 |
|
sold |
Photo /
More Info. |
1/2" - 3": Drill Grinder
Manufacturer: Oliver Instrument Company, Adrian
Instrument Company
Model: 700
Serial No.: Available for Serious Inquiry
Date of Manufacturer: 1994
Capacity: 1/2" - 3"
Motor: 2 HP
Electrics: 460 Volt/3 Phase/60 Cycle/3 Amp/1,800 RPM
Can be set up for 4" drill but requires a $6,000
manufacturer upgrade.
Features:
...Push Button Control Panel: Wheel Oscillation,
Spindle Stop/Start buttons, Auto Self-Centering
...Emergency Stop Button
...Air Feed System: allows drill to move into grinding
stone per user's angle & depth settings
Link to Manufacturer's Website on this Particular Model
Grinder:
http://www.oliverinstrument.com/oliver600.html
Machine runs well; was used regularly to grind 1"+
diameter drill bits before machine was put in surplus
inventory.
Owner decided to sub-contract out drill grinding.
Will require some basic cleaning, wipe down.
Buyer responsible for freight logistics and expenses.
I have the ability to deliver; delivery fee dependent on
distance and time.
Seller agrees to load equipment on Buyer's truck.
Equipment under power and available for inspection.
Buyer to verify all specifications and options of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed or
implied, of the year, model, hour reading, guarantee of
merchantability or fitness of the equipment; the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15328 | Brakes Press: Hydraulic |
1965 |
Pacific |
400-14 |
Excellent |
sold |
Photo /
More Info. |
: Pacific Press Brake
Year: 1965 (2nd Owner)
Serial No.: Available on Request
Model: 400-14
Capacity: ½" x 10'
Electrics: 230/3/60
Motor: 1725 RPM / .75 HP
The bed projection extends underground
approximately 36" (3')
Distance Between Columns (as measured): 124"
(10.3')
Bed Length: 14'
O/A Dimensions: 14' x 6' x 12.5' Tall
Approximate Weight: 53,000 lbs
Current owner has owned the machine for 25
years;
they are the second owner.
They have upgraded the hydraulic valving.
No tooling come with the machine. There is a
4-way die
shown in the pictures. It does not come with
it; however,
they would negotiate a separate price for the
die if a
buyer is interested.
Below is video I took of it in the current
configuration, as
a punch machine. They used it for braking
material in
the past. It works fine for either kind of
operation.
https://youtu.be/lmNevOZTvhg
The brake is in operating condition and
available for
inspection.
Buyer responsible for freight logistics and
expenses.
Rigging fees will apply to loading on Buyer's
truck.
(I received a quote for disassembling,
rigging, and
loading onto a Buyer's truck - $5,000)
Buyer to verify all specifications and
options of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|