User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1983 Make - Mazak Model - Quick Turn 20 Univ |
---|
FOR SALE: Ad # 13270 , Year = 1983 , Make = Mazak , Model = Quick Turn 20 Univ |
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 10" chuck
|
Ad #
13270 |
Year:
| 1983
|
Make:
| Mazak
|
Model:
| Quick Turn 20 Univ
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 10,000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Georgia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 1993 Mazak QT 20 univ-slant bed lathe
Manufacturer: Mazak Model: Quick Turn-20 Control: Mazatrol T-1 Condition:runs good Under Power: yes 10" 3 jaw chuck skimmer
Capacity: Swing: 17.32"
Spindle: Spindle Speeds: 50 - 5000 RPM Spindle Bore: 2.75" Spindle Nose: A2-6 Main Motor: 15/20 HP
Turret: Number of Positions: 8 X-Axis Travel: 7.125" Z-Axis Travel: 42" programmable tailstock no chip conv
Dimensions:
Floor Space: 69" x 105" Height: 73.1" Weight: 9370 lbs machine runs good can demo under power
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - ? Make - G & L Model - 350 |
---|
FOR SALE: Ad # 13269 , Year = ? , Make = G & L , Model = 350 |
|
Category: Horizontal Boring Mills
|
Capacity: travels : 50-x , 8ft-y, 60"-z vert: 5" spindle
|
Ad #
13269 |
Year:
| ?
|
Make:
| G & L
|
Model:
| 350
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 30,000
|
Dimension: L x W x H | 17ft x 8'-3" x 11'-2" tall |
Machine Location:
|
City: |
On Request
|
State: |
Georgia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- G & L Horizontal boring mill
model # 350 25HP 5" spindle nose 6MT travels : 50-x , 8ft-y, 60"-z vert 72" x 48" table 3 axis acurite DRO tailstock not shown-needs clean-up was outside no tooling included
|
Electrical Description |
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Davis Model - # 4 |
---|
FOR SALE: Ad # 13272 , Year = , Make = Davis , Model = # 4 |
|
Category: Keyseaters
|
Capacity: 1/16"-3/4" keyways
|
Ad #
13272 |
Year:
|
|
Make:
| Davis
|
Model:
| # 4
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Georgia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Davis # 4 keyseater
26" x 16" table 10" stroke tilt table no tooling only shown Cuts Keyways 1/16" to 3/4" • Greatest Height to be Handled- 8" • 24-1/4" x 26-1/2" Table • Resistance Arm • Misc. Bushings & Cutters- 1-1/2 HP
|
Electrical Description |
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1977?? Make - Webb Model - 9L-1210 |
---|
FOR SALE: Ad # 13271 , Year = 1977?? , Make = Webb , Model = 9L-1210 |
|
Category: Initial Pinch & Pyramid Type Plate Bending Rolls
|
Capacity: 10ft x 1/2" cap
|
Ad #
13271 |
Year:
| 1977??
|
Make:
| Webb
|
Model:
| 9L-1210
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 30,000?
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Georgia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Webb initial pinch rolls
10'-2" x 1/2" max capacity 12" dia roll air drop Three roll benders work by "pinching" the flat workpiece between two rolls and bending it as it comes in contact with a forming roll. This bends the workpiece into a cylindrical form, where it is welded together to produce a cylinder. Caps are then welded on to produce tanks. The upper roll is in a fixed position, the lower roll has adjustable movement to perform the gripping function. These are the "pinch" rolls. The third roll (the forming roll) is also adjustable.
Truly built to do the job year after year, these machines are designed with all three rolls driven. This insures easy material feeding and constant pull through of the workpiece.
With a manually or air adjusted drop hinge, the top shaft is automatically raised to release the pressure on the rolled sheet when the tail hinge is lowered. The rear forming roll is adjusted manually on some standard models. Power adjustments can be furnished on all WEBB rear forming rolls. Many objects we see everyday are manufactured by the metal bending industry. Water heaters, aircraft engine housings, and a variety of tanks and curved metal structures are common examples. For decades, Webb has been manufacturing the machines to do this work, both three-roll initial pinch rollers Note: minor surface rust on rolls no major pitts
|
Electrical Description |
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|