We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1994 Make - PANGBORN Model - ES-1986 |
---|
FOR SALE: Ad # 11514 , Year = 1994 , Make = PANGBORN , Model = ES-1986 |
|
Category: Bead & Shot Blasters
|
Capacity: large unit
|
Ad #
11514 |
Year:
| 1994
|
Make:
| PANGBORN
|
Model:
| ES-1986
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Pennsylvania
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- unit consits of: blast cabinet, an abrasive recovery and handling system and dust collector for ventilating the blast equipment
cabinet consists of a maganeese steel blast compartment with 8 rotoblast units mounted half inch thick manganese plates provided in line with rotoblast units opening access to interior of cabinet and vetibules in thru the work openings at entry or exit end of machine or an overhead monorail supplied by customer-included(partial system) floor of cabinet is 1" x 3/16 type 1R1 bar grating designed for 250 lbs per sq ft max load vestibules contain 3 sets of polycarbonate fingers type seals to contain abrasive. abrasive system: bottom of cabinet converges into a hopper containing 12" dia JH spiral screw coinveyor, as spent abrasive falls into the hopper it is conveyed by the screw air stream thru the seperator is controlled by a blast gate mounted on the casing a low level biondicator is supplied to indicate low abrasive level spill hopper: 10' spill hopper w screw conveyorprovided to recover most of the abrasive from exit area eight ammeters are provided to register power consumptioin of rotoblast units in order to better adjust abrasive flow rotoblast units: # 1340DD-2RK units 15HP at 3600 rpm ventilating system: 6800 CFM reqired for Torrit DF2-12 dust collector sytstem Abrasive replenisher : 4cuft unit w/ low level bin indicator and abrasive gate Removes scale to SP6, eight wheel, 120 Total HP, total motor HP 171, compressed air requirement approximately 18 SCFM at 80 PSIG work size:5'w x 4' h to be cleaned in one pass note: work 5'w x 6'h can be turned over and multi passes made to achieve cleaning, parts of odd configuration should be orientated in blast position to recieve max abrasive coverage designed for -type of work: battery cases, steel plates, fabricated structures conveyor type: monorail operation preformed: remove scale prior to coating..descale rate of 9fpm to a commercial finish (sspc-6) with surface condition A or B Rotobalst units: eight 130DD-2RK, 120 total HP Abrasive flow: approx: 131,000 pounds per hr total motor HP-171 ventilation required: 6800 CFM at 3500 LFM compressed air req: 18Cfm at 80psig electrical req: 460/3 approx 210FLA amount of abrasive charge: 12 tons of S170
|
Electrical Description |
|
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|