Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 1519 | Miscellaneous Plastic Accessories & Equipment |
1988 |
|
|
Good |
sold |
Photo /
More Info. |
Auto Roll Screen Print Press: Stroke: 14" |
|
Ad # 1525 | Miscellaneous Plastic Accessories & Equipment |
|
Peligro |
|
Good |
sold |
Photo /
More Info. |
Peligro Permanant Label Hot Stamp Roll-On Machine: 18 PM
size: 5 x 10 label feed |
|
Ad # 1526 | Miscellaneous Plastic Accessories & Equipment |
1992 |
STAMPRITE |
|
Good |
sold |
Photo /
More Info. |
STAMPRITE Hot Roll Machine: 15 PM
size: 5 x 10 label feed |
|
Ad # 1524 | Miscellaneous Plastic Accessories & Equipment |
1994 |
Label Air |
2114-M |
Good |
sold |
Photo /
More Info. |
Label Air Machine: 120 PM |
|
Ad # 1522 | Miscellaneous Plastic Accessories & Equipment |
1992 |
Electronic Liquid Fillers |
CT 600 |
Good |
sold |
Photo /
More Info. |
E.L.I. Lidding Machine: 100 PM
Size: 160 mm |
|
Ad # 1523 | Miscellaneous Plastic Accessories & Equipment |
1987 |
Kent |
PP Series |
Good |
sold |
Photo /
More Info. |
Kent Pad Printer: 15 PM
with burn tables etc |
|
Ad # 1520 | Miscellaneous Plastic Accessories & Equipment |
1988 |
Franklin |
SPEC |
Good |
sold |
Photo /
More Info. |
Franklin 2 Head Hot Stamp Printing Machine: Size: 10" x 6"
|
|
Ad # 1521 | Miscellaneous Plastic Accessories & Equipment |
1986/7 |
Decorating Resource |
Frisbee |
Good |
sold |
Photo /
More Info. |
Frisbee Hot Stamp Roll Machine: 20 P.M.
Size: 9" |
|
Ad # 9778 | Miscellaneous Plastic Accessories & Equipment |
Unknown |
Reg Mac |
Densification |
Fair |
Sold |
Photo /
More Info. |
Unknown: Reg Mac Plastic Densification Line. Has conveyor, controller, and various ... |
|
Ad # 6890 | Miscellaneous Plastic Accessories & Equipment |
|
AEC Whitlock |
|
Excellent |
sold |
Photo /
More Info. |
Large Plastics Hopper: |
|
Ad # 8985 | Miscellaneous Plastic Accessories & Equipment |
2004 |
Remco |
MSB 250T mini strip builder |
Very Good |
sold |
Photo /
More Info. |
Extruder # TPB130x120: Machine is designed to apply a rubber or plastic wall thickness in amounts ... |
|
Ad # 6855 | Miscellaneous Plastic Accessories & Equipment |
|
NRM |
Pacemaker |
Good |
Sold |
Photo /
More Info. |
NRM Pacemaker Plastic Extruder: NRM Pacemaker Plastic Extruder
24:1 L/D
150 HP
Water Cooled
17.42:1 Gear Box Ratio
Reliance Drive |
|
Ad # 6844 | Miscellaneous Plastic Accessories & Equipment |
2000 |
Bausano |
72/30 |
Excellent |
SOLD |
Photo /
More Info. |
2000 Bausano 72/30 Plastic Extruder: 2000 Bausano 72/30
72mm Screw
30:1 L/D Ratio
Water Cooled
Vented
Digistar II |
|
Ad # 6843 | Miscellaneous Plastic Accessories & Equipment |
|
Battenfeld |
Gloucester |
Good |
Sold |
Photo /
More Info. |
Battenfeld Gloucester Plastic Extruder: Battenfeld Gloucester
4.5"
32:1
200 hp
Non Vented
GE Motor |
|
Ad # 6854 | Miscellaneous Plastic Accessories & Equipment |
|
Pacemaker |
NRM |
Very Good |
Sold |
Photo /
More Info. |
Pacemaker NRM Plastic Extruder: Pacemaker NRM Plastic Extruder
3.5”
32:1 L/D
75 HP
Water Cooled
24.86:1 Gear Ratio
Barber Coleman/Syscon Controls |
|
Ad # 6845 | Miscellaneous Plastic Accessories & Equipment |
2000 |
Bausano |
MD-90-30 |
Excellent |
SOLD |
Photo /
More Info. |
2000 Bausano MD-90-30 Plastic Extruder: 2000 Bausano MD-90-30
90 mm
30:1 L/D
4 x 18.5 KW
Air Cooled
Vented
Digistar II
Includes Pipe Bench |
|
Ad # 6846 | Miscellaneous Plastic Accessories & Equipment |
|
Davis Standard |
Killion |
Very Good |
Sold |
No Photo /
More Info. |
Davis Standard Killion Complete Tubing Line: Davis Standard Killion Complete Tubing Line
1.0"
Genac Water Bath
Vers
Chiller
Very Clean |
|
Ad # 6850 | Miscellaneous Plastic Accessories & Equipment |
1988 |
Hartig |
|
Good |
Sold |
Photo /
More Info. |
1988 Hartig Plastic Extruder: 1988 Hartig Plastic Extruder
3.5"
30:1 L/D
75 HP
Air Cooled
Ran PE & PS |
|
Ad # 11540 | Miscellaneous Plastic Accessories & Equipment |
|
Indco |
Air Gear Drive IBC Tote Mixer |
New |
sold |
Photo /
More Info. |
3/4 HP: Brand New, Never Used, In the Box-
3/4 HP Air Gear Drive IBC Tote Mixer Adjustable
Bracket
Includes Mixer and Motor Both never opened,
BRAND NEW!
Model Number: BGF-075A
The BGF Series is our gear reduced version of the
IBC tote bracket mixer. It is ideal for mixing
medium to heavy viscosity materials such as
slurries, polymers, inks and coatings or for
suspending settled particles. The 3/4 HP air
motor
model provides maximum power when supplied
with 100 PSI @ 30 CFM. See our air motor
performance guide for operation at lower air
flow.
The gear reduction delivers 40-400 RPM at higher
torque than a direct drive mixer. The low-
profile
configuration allows operation in areas with low
overhead clearance. The 36" long mixing shaft
attaches to a coupler and two 10" collapsible
impellers with set screws. The impellers are
designed to enter 6" tote openings and open to
10"
when in operation. This bracket mount fits totes
between 34" and 48" wide. All wetted parts are
stainless steel for chemical resistance. This
model
features a Gast air motor which is known for its
rugged construction and reliability. Variable
speed
with air motors offers flexibility for mixing in
multiple applications. Air motors are also a
lighter
weight option than our electric models. Non-
electrical operation reduces the possibility of
explosion in a combustible environment.
|
|
Ad # 12540 | Miscellaneous Plastic Accessories & Equipment |
|
Edwards |
E2M175 |
Good |
sold |
Photo /
More Info. |
Vacumm Pump: Edward Vacum Pump Model E2M175
Voltage 220/ 3 Phase
std specs below:
Overview
Prices & Options
Features & Benefits
Technical Data
Accessories
Documents & Support Overview
Edwards E2M175 series two stage oil sealed
rotary vane vacuum pumps are renowned for their
high ultimate vacuum, rapid pumping speeds,
quiet operation and ability to handle water
vapour. These direct drive rotary vane pumps
are inherently compact and vibration free, and
with their finger-proof fan and coupling
housings they offer excellent operator
protection.
This pump is suitable for most duties and is
safe to handle non-flammable gases and vapours
within the normal operating parameters of the
pump.
Reliable system protection devices
Every pump has protection devices to prevent
oil and air suck-back into the vacuum system if
the pump stops while under vacuum. A variety of
protection devices are used, depending on the
pump size and cost, but emphasis is always
placed on reliability and simplicity. When you
use gas ballast on some of the pumps, you must
use a solenoid operated gas ballast control
valve to prevent air suck-back.
Positive Pressure Oil Lubrication
The EM pumps incorporate a well proven
positive pressure oil lubrication system which
as been developed by Edwards to ensure correct
lubrication in all duty modes and particularly
to prevent oil starvation with high gas loads.
An integral oil pump ensures that a more than
adequate oil flow is pumped throughout the
stator/rotor assembly at all times.
This oil lubrication system means that the
level of oil in the reservoir is less critical
than with other pump designs. All pumps can
operate with oil levels as low as 50-70 of the
maximum. A full length, easily visible oil
level sight glass allows you to conveniently
monitor the oil level.
Gas Ballast Facility
The EM pumps have a gas ballast valve. The
valve is used to introduce a suitable gas into
the stator during the compression stage: this
prevents condensation of vapors inside the
pump, dilutes and ejects corrosive gases and
purges the oil of gases and vapors. Therefore,
the use of gas ballast reduces oil degradation
and pump corrosion.
Low Noise Levels
The EM pumps maintain Edwards’s reputation
for quiet operation pumps with a typical noise
level of 75 dB(A).
Pumping Systems
The EM pumps, with suitable accessories, can
partner a variety of other types of pump in
vacuum systems for industry and for research. A
special feature of the E2M175S is the central
vacuum inlet which enables you to fit a
mechanical booster pump with a minimum
overhang, to create compact combination pumping
systems.
Easy Maintenance
The advanced lubrication system allows the EM
pumps to work with wide oil level tolerances,
which reduce the need to top-up the oil.
All EM pumps are constructed with internal
dowels, which reduce the need for skilled
setting of tolerances, when the pump is
dismantled. The pumps are designed so that all
key components are easily accessible. The
exhaust valve seals and oil distributor seals
are exposed after the top cover is removed. The
shaft seal can be replaced quickly without
stripping down the pump.
Applications
Vacuum metallurgy processes
Thin film coating technologies
Pharmaceutical freeze drying
Refrigeration and air conditioning system
evacuation, drying, and backfilling
Transformer and cable drying and
impregnation, insulating oil treatment plant
Lamp manufacture
Cryogenic vessel evacuation
Vacuum drying and distillation in chemical
industries
Semiconductor device manufacture
Backing pump for high vacuum applications
Displacement
50Hz 178 m3h-1 / 105 ft3min-1
60Hz 214 m3h-1 / 126 ft3min-1
Speed (Pneurop)
50Hz 160 m3h-1 / 94 ft3min-1
60Hz 196 m3h-1 / 115 ft3min-1
Number of stages 2
Ultimate vacuum (total pressure)
Without gas ballast 1 x 10-3 mbar / 7.7 x 10-4
Torr
With gas ballast 7 x 10-3 mbar / 5.4 x 10-3
Torr
Ultimate with Fomblin®
Without gas ballast 1 x 10-2 mbar
Inlet connection ISO63 blank flange with seal
Outlet connection ISO40 flange centre tapped
Max outlet pressure 0.5 bar gauge
Max inlet pressure for water vapor 20 mbar /
15 Torr
Max water vapor pumping rate 0.3 kg h-1 / 0.7
lb h-1
Weight 230 kg / 508 lb
Motor protection rating IP55
Motor power
50Hz 5.5 kW / 7.5 hp
60Hz 6.5 kW / 8.5 hp
Standard oil capacity
maximum 25 litre
minimum 16 litre
PFPE oil capacity
maximum 18 litre
minimum 6.5 litre
Recommended oil Ultragrade 70
Noise level 75 dB (A)
Water cooling requirement 1.3 lmin-1
|
|
Ad # 12499 | Miscellaneous Plastic Accessories & Equipment |
|
Leitz |
Wild TA41 |
Excellent |
sold |
Photo /
More Info. |
Max Roll Width 48": WILD LEITZ - PLOTTER/CUTTER
MAX ROLL WIDTH 48"
TA41
Speed: 1000mm/s
DC motor
Roll-Feed Options: Manual-Auto
Manual Available with purchase
Good/Working Condition (demoable) |
|
Ad # 12498 | Miscellaneous Plastic Accessories & Equipment |
|
Dorn SPE |
Stallion LS4157 |
Excellent |
sold |
Photo /
More Info. |
3/4 AUTOMATIC HIGH PRECISION SCREEN41" X 57": DORN SPE - STALLION
3/4 AUTOMATIC HIGH PRECISION SCREEN
PRINTING FOUR POST PRESS WITH TAKE OFF.
PRINT AREA 40 X 50
Manual or Automatic Printing Option available
1000 I.P.H.
Uses linear motion bearing, within .01mm precision
Adjustable Vacuum/Exhaust Functions
Choice of Immediate/delayed Flood Coating
Accomodates a variety of inks |
|
Ad # 9490 | Miscellaneous Plastic Accessories & Equipment |
|
|
|
Good |
sold |
Photo /
More Info. |
250 gal. cyclone material bagger: cyclone bagging unit-250 gal
bags bulk material |
|
Ad # 15813 | Miscellaneous Plastic Accessories & Equipment |
2016 |
RDN |
IC 5/206-1 |
Good |
Sold |
Photo /
More Info. |
: 2016 RDN
Puller/Cutter,
Model:
IC.5/206-1 for Small
Plastic & Rubber
Tubing and Profiles
w/ Touchscreen, .87
H.P, 230/1/160
Wired,
10 AMPS |
|
Ad # 11338 | Miscellaneous Plastic Accessories & Equipment |
2005 |
Hill Machinery |
|
Good |
sold |
Photo /
More Info. |
: Various machines being sold here.
All machines are large and are being sold for
extremely low prices because we are tired of
paying
to rent out the warehouse. ALL REASONABLE
OFFERS ACCEPTED. Please see the link below for
detailed photos and specifications on each
machine.
|
|
Ad # 1891 | Miscellaneous Plastic Accessories & Equipment |
1995 |
LWB |
GIP-300 |
Very Good |
sold |
Photo /
More Info. |
TWIN RUBBER MOLDING MACHINE: 1-LWB MODEL GIP-300 IN C-FRAME CONSTRUCTION
CLOSING FROM TOP, WITH DOUBLE UNIT INJECTION.
CLAMPING POWER 30 TONS , 16" CLAMPING STROKE ,
2X4 OZ INJECTION VOLUME ,1500 BAR INJECTION
PRESSURE MAX , 1" INJECTION PISTON DIAMETER , 6"
NOZZLE SPACING , 1.3 SCREW DIAMETER ,
14X16 HEATER PLATENS.
1 HYDRAULIC LOCKING UNIT , 1 PLASTICISING UNIT ,
2 HYDRAULIC INJECTION UNITS WITH STROKE
INDICATOR NOZZLE PRESSING UNIT ( INJECTION
SYSTEM"E") .
2 HEATING PLATENS WITH 220 V HEATERS AND A THIRD
HEATING ZONE , 1 CONTROL ZONE WITH
PLATENS 12 X 12 INCHES AND SMALLER , 1 HYDRAULIC
POWER PACK , 1 HYDRAULIC CONTROL UNIT ,
1 MACHINE MANUEL , 1 ELECTRAIL / ELECTRONIC
CONTROL SYSTEM WITH MICROPROCESSOR SYSTEM .
BOTH INJECTION CYLINDERS FILLED SIMULTANEOUSLY
FROM ONE PLASTICISING UNIT .
SERVICE AND SPARE PARTS FROM LWB OF NORTH AMERICA
.
|
|
Ad # 10327 | Miscellaneous Plastic Accessories & Equipment |
|
Maguire |
WSB221 |
Excellent |
sold |
Photo /
More Info. |
1000 pound per hour: Maguire three component blender. Model WSB221- two slide gates for Virgin/ ... |
|
Ad # 10221 | Miscellaneous Plastic Accessories & Equipment |
2006 |
|
201 |
New |
sold |
Photo /
More Info. |
10 to 1: This machine is a Fluid dispenser that was purchased to dispense silicone b... |
|
Ad # 7528 | Miscellaneous Plastic Accessories & Equipment |
|
NRM |
Pacemaker 70 |
Very Good |
Sold |
Photo /
More Info. |
NRM Pacemaker 70 Model Blown Film Extruder: NRM Pacemaker 70
3.5" 24:1 L/D Ratio
14" Rotational Bubble Extrusion Die
Refurb. Line
Complete System with tower
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
COMPLETE BLOWN FILM
Extruder Screw Size 3.5"
L/D Ratio 24:1
Barrel Zones 5
Controls Barber Coleman 520
Includes 1998 Maguire Model 4 Compartment wt. scale
Blender with MPI Digital Scale System 50# Hopper
1996 Alpha Marathon Model M48-14DL
14" Rotational Bubble Extrusion Die w/ bubble gas -
Cage Stabilizer
New York Blow Company
20 HP Blowe System
Custom Mfg. 68" Primary Nip assembly
1985 Reifenhauser Mdl. WF1600
Max Width 1600 mm
Slitter / Winder with 5 splitting heads
Quick Draft 3 hp trim removal blower system
***** INCLUDES ENTIRE TOWER ASSEMBLY
Photos available |
|
Ad # 7526 | Miscellaneous Plastic Accessories & Equipment |
1993 |
NFM |
|
Very Good |
SOLD |
Photo /
More Info. |
1993 NFM Single Screw Extruder: * All machinery specifications must be independently verified by buyer. All... |
|
Ad # 7527 | Miscellaneous Plastic Accessories & Equipment |
2003 |
NFM |
HT 0.8" 212-121-21E1 |
Excellent |
sold |
Photo /
More Info. |
2003 NFM Twin Screw Compounding Extruder: 20mm
54:1 L/D Ration
10 HP
5 Electrical Barrel Heater Zones
"46 Hours of use"
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Screw Size 20 mm
L/D Ratio 54:1
Vented or Non (may be plugged) Vented
Heated Electrical Heated Barrel
Heater Barrel Zones 5
Horsepower 10 @ 500 rpms
Control Cabinet Attached on Stand
Ammeters
Electrics 460v / 3 ph / 60 hz
Includes Vacuum System-New water ring vacuum pump
1.5 HP Motor
Pump
Vacuum Gage, Flow Meter, & adjusting Valve
Rated @ 15 cfm @ 27" Hg
Flow - 0.9 gpm
Electrical 230v / 3 ph / 60hz
Water Requirement For Exchange Cooling 5 GPM |
|
Ad # 7525 | Miscellaneous Plastic Accessories & Equipment |
|
Davis Standard |
Thermatic 350II-F6251 |
Good |
Sold |
Photo /
More Info. |
Davis Standard Thermatic 350II-F6251 Extruder: Davis Standard Thermatic 350 II-F6251
Single Screw Extruder
Screw Size 3.5" L/D Ratio 24:1
Barrel Zones 5
Cooled Air
HP 75
Includes Control Panel
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Single Screw Extruder
Screw Size 3.5"
L/D Ratio 24:1
Barrel Zones 5
Cooled Air
Horsepower 75Includes Control Panel
Photos available |
|
Ad # 10141 | Miscellaneous Plastic Accessories & Equipment |
2008 |
Bry-Air |
VFB-50-E4-6000-DXP-DXA |
New |
sold |
Photo /
More Info. |
Bry-Air Industrial Dehumidifier: MODEL NO.VFB-50-E4-6000-DXP-DXA
SERIAL NO.2008-E4-8651
VOLTS/PH/FREQ480-3-60
ELEC. DWG. NO.208135-E1B
FULL LOAD AMPS294.53
MIN. CIRC. AMPS368.16
MAX OVERCURRENT400
PRO. MOTOR HP15
RCT. MOTOR HP5
HEATER INPUT KW115.5
E.S.P. PROCESS1.50"
E.S.P. REACT0.75"
PRO. MAX. OUT TEMP190 F
ENCLOSURENEMA 12
|
|
Ad # 1778 | Miscellaneous Plastic Accessories & Equipment |
|
SterlTronics |
S64 12-A |
Good |
Sold |
Photo /
More Info. |
Water Temp Control Units : Used mainly for Plastic Injection machine mold temp control
0 - 250F Control range
Heater 9 KW, 14 Amps
150 psi max
3 UNITS AVAILABLE |
|
Ad # 8178 | Miscellaneous Plastic Accessories & Equipment |
|
Cincinnati Milacron |
CMTI-60A. 4311FX |
Excellent |
Sold |
Photo /
More Info. |
Centralized Water Cooling System, Cincinnati Milacron, Model CMTI-60A: Comp. HP: 15/15/15/15 hp
Processor Pump: 20 hp
Re-circulation Pump: 5 hp
Water Chiller: Freon 22, 89.7 lbs
Temp Range: 20 - 60 F
Max Operating Pressure: 100 psi |
|
Ad # 8175 | Miscellaneous Plastic Accessories & Equipment |
?/ |
ALL TYPES |
ALL SIZES |
Very Good |
sold |
Photo /
More Info. |
Cumberland, Dry Air, Rapid, Hella, UnaDyn, Nelmor, ConAir Worktex: All types, models, sizes of:
Plastic Dryers,
Plastic granulators,
plastic hoppers,
water coolers for plastic machines,
temperature controllers,
Plastic Feeders
Part unloaders (robotic)
Etc etc |
|
Ad # 11007 | Miscellaneous Plastic Accessories & Equipment |
|
|
|
New |
sold |
Photo /
More Info. |
48": new, 48" rotary collection table. 110 motor; speed controller, reverse brak... |
|