Year:
| 2008
|
Make:
| Qualitest
|
Model:
| Qualirock-RS
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 55
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Qualitest Rockwell superficial hardness tester # RS
8" base stand calibrated 4-111-12 due-4-11-12
std catalog specs below-please verify Innovative and state-of-the-art Digital Rockwell Hardness Tester meeting ASTM E-18, & ISO 6508 •Horizontal Protrudent Indenter Design, suitable also for internal and external testing •Modern design with Titanium metallic Silver finish •Dead-weight Type •Testing on Surfaces difficult to reach •Testing internal surface of rings and tubes with diameters over 23mm •Testing external surface of round bars with diameters over 3mm •Automatic test procedure •High definition backlight LCD •Simple and easily selectable operation menu •RS-232 data output •Unbeatable Cost/Quality Ratio
QualiRock-RS (Twin model) Hardness Scales Rockwell A, B, C, D, E, F, G, H, K, L, M, P, R, S, V 15 scales in total 15N, 30N, 45N, 15T, 30T, 45T, 15W, 30W, 45W, 15X, 30X, 45X, 15Y, 30Y, 45Y
Resolution 0.1 Rockwell Unit Pre-Load 98.07N/10kgf, 29.42N/3kgf Total Load 11471N/150 kgf 588.4N/60kgf, 980.7N/100kgf, 11471N/150 kgf
147.1N/15kgf, 294.2N/30kgf, 441.3N/45kgf Display Matrix Backlight LCD Operation method Membrane keypad, menu Test Process Automatic Load Duration 1-50 seconds, Can be set, dynamically displayed and stored Functions: •Upper/ Lower hardness limits setting & alarming •Data statistics: Max., Min., S, R •Scales conversion: convert measured value to Vickers, Brinell, Leebs, etc. •Curvature correction: Cylinder & sphere Applicable standard: ASTM E-18, ISO 6508-1999 Testing Space: Vertical: 220mm ( 8.6 in.), Horizontal: 150mm (5.9 in.) Tested workpiece: External Cylinder: Min. Ø 3mm, Internal Cylinder: Min. Ø 23mm Voltage: 110V/220V 50Hz, 4A Frame Deformation: +/- 0.5% (ASTM E18-08 Requires less than +/-1%) Transducer Accuracy: +/- 0.3μm Regular Rockwell (ASTM E18-08 Requires +/- 1.0μm Regular Rockwell) +/- 0.5μm Superficial Rockwell (ASTM E18-08 Requires +/- 0.5μm Superficial Rockwell) Repeatability: 0.5 up to 1.0 (HRC Scale) (ASTM E18-08 Requires, 1.0, 1.5 up to 2.0 on the HRC scale) Tolerance of applied force: Within 0.5% (ASTM E18-08 requires 0.6-0.75%) Dimensions: 715x 225 x 790mm (28x9x31 in.) 725 x 245 x 820mm (29x10x32 in.) Weight: 120kg (264lb) Dimensions: 715mm x 225mm x 790mm 725mm x 245mm x 820mm Weight: 120kg Standard Configuration: Main unit, 1 HRC Test Block, 1 HRB Test Block, (15N, 30N, 30T Blocks with QualiRock-RS), 120° diamond penetrator, 1/16" steel ball indenter, 1/16" steel balls, Round flat anvil Ø 70mm, V- anvil, Power cable, Manual
sells for 9K new,,, like new condition
|
Electrical Description |
|
|