Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9030 | Air Dryers |
|
Eridae |
YDCA-200NF |
Fair |
Sold |
No Photo /
More Info. |
Eridae 200CFM refrigerated air dryer: used 200CFM air dryer |
|
Ad # 9804 | Air Dryers |
2008 |
IR |
nvc500 a400 |
New |
sold |
Photo /
More Info. |
500cfm 3" npt connect: here is a link http://www.thermokingedmonton.com/air-compressor-division/pd... |
|
Ad # 10876 | Air Dryers |
|
|
|
Fair |
sold |
No Photo /
More Info. |
100+ gal. : 100+ gal. surge tank |
|
Ad # 10875 | Air Dryers |
|
|
|
Fair |
sold |
Photo /
More Info. |
small collection tank: Spee Aire compressed air dryer |
|
Ad # 11618 | Air Dryers |
|
wilkerson |
a03-ph-poo |
Good |
sold |
No Photo /
More Info. |
100 scfm: air dryer ..good condition |
|
Ad # 15620 | Air Dryers |
|
Hankison |
PR100-115 |
Excellent |
sold |
Photo /
More Info. |
100 CFM: Capacity: 100CFM. 208-230 volt, 60Hz, single phase. 1 1/2"npt air connectio... |
|
Ad # 15621 | Air Dryers |
|
Gardner Denver |
RNC250A4 |
Excellent |
sold |
Photo /
More Info. |
250 SCFM: Rated Capacity: 250 SCFM @ 100 PSIG & 100°, Maximum working pressure: 250 P... |
|
Ad # 12737 | Air Dryers |
|
Anderson Industrial |
Air Dyer |
Fair |
sold |
Photo /
More Info. |
: |
|
Ad # 15599 | Air Dryers |
|
Mokon |
KV2A0411 |
Good |
sold |
Photo /
More Info. |
: 2 dryers available
Std Mfr Specs (please verify):
Mokon’s heat transfer fluid based Full Range temperature control system offers a combination heating and cooling system all in one package. A Mokon heat transfer fluid system, combined with an Iceman chiller, integrates the benefits and features of both products into one compact,
self-supporting unit. The Full Range system is ideal for applications requiring
multi-zone control, processes requiring both heating and cooling and/or a wide variety of temperatures, or where water supply to a heat exchanger is not accessible. It is
available in multiple sizes, configurations, and a variety of cooling, heating and pumping capacities. The overall design provides for long-life, durability and accurate continuous process control. Traditional Mokon quality and craftsmanship can be found throughout, such
as nonferrous construction on the cooling loop and the incorporation of highly accurate microprocessor-based controls. All these features and more in a compact design with Mokon reliability built in! |
|
Ad # 15597 | Air Dryers |
|
Thoreson McCosh Tech 3 |
TD12 |
Good |
sold |
Photo /
More Info. |
: Thoreson McCosh
Tech 3
Model-TD12
S/N-203-60-02
std mfg specs below:
Your Thoreson - McCosh dryer was thoroughly tested prior to shipment and checked to
insure that its performance is up to specifications. Upon arrival in your plant, the unit should be carefully inspected for physical damage which might have occurred in transportation.
Should any damage be observed, it should be reported to the carrier at the earliest possible
time.
Dryers are held to the crate bottom with a Z bracket. The side panels must be removed
before the Z brackets can be removed. Use a hi-low or a lift to raise the unit off of the crate
bottom. We recommend that a person steady the unit while on the hi-low.
The dryer should be located as close as possible to the material drying hopper it will
service. This will minimize thermal and air flow losses. The unit should be placed on any
reasonable level area or platform. The unit should be connected to the power source
indicated on the model nameplate. If the return air temperature will be above 165
F/ 74
C,
than an After - Cooler should be installed into your unit.
This dryer is a triple desiccant bed unit which continuously removes moisture from the process air stream by adsorption. While two of the beds are adsorbing moisture from the process air, the third is being automatically recharged.
This unit is a re - circulating dryer, recycling the drying air from the material hopper through the desiccant beds. The regeneration air flow is completely independent of the process air flow. The only atmospheric air that enters the process system is a small quantity which may leak in via the material loading system, if present on the hopper. A process air filter and regeneration air filter are provided to prevent contaminates from reaching the desiccant material. |
|
Ad # 15596 | Air Dryers |
|
Arid-X Dri Air |
ARID-X18 |
Good |
sold |
Photo /
More Info. |
: Arid-X Dri Air
Model #ARID-X18
S/N D7571
208 Volts 20 amps
Single phase
std mfg specs below:
The ARID-X dryer series is a dual bed design that provides a
constant supply of dry air to the material hopper. While one
bed is removing moisture from the process air the other is
regenerating by heating the desiccant to a high temperature.
Once the regenerated bed cools down, the Zone Valve
switches the airflow, and the newly regenerated bed is used to
desiccate the process air stream. The saturated bed is now
regenerated in the same manner, completing the regeneration
cycle. The cycle is depicted Page 8.
The airflow design of the ARID-X dryers makes the
regeneration cycle more efficient because we utilize a small
amount of the desiccated process air rather than ambient air
to regenerate the desiccant bed. This reduces the impact of
the high moisture content of the ambient air, which would
contaminate the desiccant bed, and allows the dryer to attain
a lower dew point.
Dryer Controls
The ARID-X series can be supplied with the standard PLC
Control Module or the advanced Microprocessor Control
Module, while the HP4-X series is only available with the
Microprocessor Control Module.
The PLC Control module includes a PLC control board,
display board, temperature controller and touch pad that is
programmed for the drying cycle described above. The
controller, display board and touch pad indicate the machine
status, alarms, set points and allow you to enter operational
settings for the dryer. These are explained in more detail later
in this manual.
The Microprocessor Control Module is one of the most
sophisticated yet operator friendly controls on the market. It
has many more features than the PLC control module that
provide the operator with more control and operational
flexibility with the dryer. These features and the operating
instructions are covered in detail in the Microprocessor
Control Instruction Manual included with your dryer
2 dryers available |
|
Ad # 3195 | Air Dryers |
1999 |
Ingersoll Rand |
SDR-35 |
Good |
Sold |
Photo /
More Info. |
Ingersoll Rand Compressed Air Dryer: Maximum inlet pressure 250 psig
Minimum inlet pressure 5 psig
Maximum ambient temperature 120 F
Minimum ambient temperature 60 F
7.6 Amp
Refrigerant charge 284 gr. |
|
Ad # 3016 | Air Dryers |
90's |
General Pneumatics |
TK 100 |
|
Sold |
Photo /
More Info. |
General Pneumatics Air Dryer: 100CFM high capacity |
|
Ad # 7703 | Air Dryers |
95? |
PneumaTech |
AD-250 |
Good |
sold |
Photo /
More Info. |
250 CFM PneumaTech AD0250 Refrigerated Air Dryer: Capacity: 250 CFM
Refrigeratnt: (12?) (T 2?)
Charge: 1.5 |
|
Ad # 14087 | Air Dryers |
|
Airtek 500 |
twp-500 |
Good |
sold |
Photo /
More Info. |
500 CFM : Airtek 500 CFM Model #TWP-500 Heated Desiccant Air
Dryer w/Particulate filter
Model# TWP500
S/N 96K-6914
500 CFM @ 125 degree |
|
Ad # 14088 | Air Dryers |
|
AIRTEK 600 |
TWP600 |
Good |
Sold |
Photo /
More Info. |
600 CFM : Airtek 600 CFM Model #TWP600 Heated Desiccant Air Dryer w/Particulate filte... |
|
Ad # 10183 | Air Dryers |
1999 |
Airtek |
SC10000 |
Excellent |
sold |
Photo /
More Info. |
10,000 cfm: Refrigerated air dryer.
200 psig max. pressure.
100 degrees F max inlet temp.
Stainless steel heat exchanger.
50 hp.
Compressor FLA80.
Freon type R22.
Charge 525 lbs.
Water cooled. |
|
Ad # 10184 | Air Dryers |
1993 |
Airtak |
D-5000-W |
Good |
sold |
Photo /
More Info. |
5000 cfm: Refrigerated air dryer.
Max working press. 150 psi at 150 degrees F.
Freon type R22.
Water cooled. |
|
Ad # 7441 | Air Dryers |
|
Hydronix Dryer |
100HPS100 |
Very Good |
sold |
Photo /
More Info. |
Hydronix Dryer Model #100HPS100: Flow 100 SCFM
Press. 100 PSIG
Temp. 100 deg F |
|
Ad # 2600 | Air Dryers |
1993 |
Airtek |
SC-650 |
Very Good |
Sold |
Photo /
More Info. |
Airtek Air Dryer system: Refrigerated
200 psi
650 scfm
2 receiving tanks
smart cycle -dual mode |
|
Ad # 2590 | Air Dryers |
|
|
|
|
Sold |
Photo /
More Info. |
Large Air Receiving Tank: 3' Diameter x 8' High
approx 400 gallons |
|
Ad # 2556 | Air Dryers |
1992 |
Nordon/Pioneer |
PHC500 |
Very Good |
Sold |
Photo /
More Info. |
Nordson/Pioneer Air Dryer: Desiccant
Twin cartridge
500CFM
100-150PSI |
|
Ad # 2547 | Air Dryers |
|
|
|
Good |
Sold |
Photo /
More Info. |
Air Dryer: |
|
Ad # 2573 | Air Dryers |
|
Dominick Hunter |
DTX-0850 |
Good |
Sold |
Photo /
More Info. |
Dominick Hunter Air Dryer: Desiccant
Twin column |
|
Ad # 11061 | Air Dryers |
|
Champion |
|
Very Good |
sold |
Photo /
More Info. |
: High side 300PSIG Minimum Low Side 150PSIG Minimum |
|