We found 63 matching ads. Now displaying the remaining 63 ads.
(Tip: Click on the column headers to sort your results by that criteria)
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10940 | Laser |
2006 |
Adige |
LT712D |
Excellent |
Sold |
Photo /
More Info. |
2500 watt: (2006)
Adige Model LT712D Laser Tube Cutter
laser power source is a 2500 watt Rofin DC 025 Max tube length: 24'
Max tube diam: 6.000"
Max thickness: 0.250"
cuts round, oval, square and rectangle
13' unload table.
Chiller
Dust collector
under power
Approx 14,000 hrs RF tube time
|
|
Ad # 14453 | Laser |
1995 |
Mazak |
turbo X-48 champion |
Good |
sold |
Photo /
More Info. |
1000W co2 laser :1/4" mild steel: Mazak:Model#new turbo X-48 champion
sheet size: 4' x 8'
stroke X: 103.5"
stroke Y:50"
stroke Z:3.9"
voltage 208-220/3
laser output 1000W co2 type
capacity: 1/4" mild steel, alumi nium or
stainless approx: 1/8" leaves a very nice edge
finish!!
laser model : co2 laser YB-L100B-7m1
control:nc unit: mazatrol L-32B
Note:machine on time Hrs: 45,700 run time
approc 20,000hrs: the machine has had complete
refurbish maint preformed in june of 2014 from
mazak,mirrors ,alignments and tune-up totaling
6K...its ready to go!!
Note: nice machine,runs well,currently
running under power until jan 2015!
|
|
Ad # 14453 | Laser |
1995 |
Mazak |
turbo X-48 champion |
Good |
sold |
Photo /
More Info. |
1000W co2 laser :1/4" mild steel: Mazak:Model#new turbo X-48 champion
sheet size: 4' x 8'
stroke X: 103.5"
stroke Y:50"
stroke Z:3.9"
voltage 208-220/3
laser output 1000W co2 type
capacity: 1/4" mild steel, alumi nium or
stainless approx: 1/8" leaves a very nice edge
finish!!
laser model : co2 laser YB-L100B-7m1
control:nc unit: mazatrol L-32B
Note:machine on time Hrs: 45,700 run time
approc 20,000hrs: the machine has had complete
refurbish maint preformed in june of 2014 from
mazak,mirrors ,alignments and tune-up totaling
6K...its ready to go!!
Note: nice machine,runs well,currently
running under power until jan 2015!
|
|
Ad # 14449 | Laser |
2006 |
Mitsubishi |
ML2512HV-20CF |
Good |
sold |
Photo /
More Info. |
2000 Watt: 4' x 8' Co2 laser: Mitsubishi ML2512HV
laser control unit # LC20BV
capacity: 4' x 8'
travels: X:98.4",Y49.2",Z11.81"
max worpiece size: 96" x 48"
feed rate: 1180 IPM
max part weight: 827lbs
rapid speed: 1968 single axis/2783 simultaneous IPM
min command input: 0.0001 in
drive type:ac servo
dust collector: cartridge type
cnc control: LC20BP2: 64bit cpu,2GB hard drive,2MB memory
laser resonator: 3 axis cross flow,SD:2000W w/ chiller
options: networking card,plus
Mfg: Sept. 2006 (we bought it new May, 2007 put in service)
Std acc: rotary work lifter for ease of loading/unloading material,cast frame for high ridgedity,open table design,large z travel for odd shaped parts,sealed resonator design for low maintenance,uses less gas also
2000W co2 capacity
Hours on total: 36741
Beam on hours: 9050
208/3VAC :38KVA total usage:106 amps full load
Resonator cleaned at 7987 beam on hours (done about every 4000 beam on hours). New optics installed.
|
|
Ad # 12909 | Laser |
2009 |
Bystronic |
3015 Bysprint Pro |
Excellent |
sold |
Photo /
More Info. |
: Bystronic
BySprintPro 3015 mit 4,4 kW Laser.
Bj.2009
No.1346
4400 Watt
7069/6777 h |
|
Ad # 14443 | Laser |
1990's |
Amada |
Lasmac LC Alpha ii |
Excellent |
sold |
Photo /
More Info. |
49" x 49" Sheet Size: Amada Lasmac LC 1212 Alpha ii Laser
Year: 1995
WATTAGE 1,500
SHEET SIZE 49" X 49"
SHEET LENGTH WITH ONE REPOSITION 98"
X AXIS TRAVEL 49.2"
Y AXIS TRAVEL 49.2"
Z AXIS TRAVEL 11.8"
MAX. MATERIAL THICKNESS (CARBON STEEL) 0.375"
MAX. MATERIAL THICKNESS (STAINLESS STEEL)
0.125"
MAX. MATERIAL THICKNESS (ALUMINUM) 0.080"
MAX. CUTTING SPEED 785 IPM
MAX. TABLE SPEED 3,150 IPM
WORK CHUTE SIZE 21" X 96"
DIMENSIONS - LASER (LXWXH) 123" X 87" X 92"
DIMENSIONS - DUST COLLECTOR (LXWXH) 40" X 33"
X 87"
DIMENSIOINS - COOLER (LXWXH) 60" X 31 1/2" X
65"
WEIGHT 12,500 LBS.
EQUIPPED WITH
FANUC 16L CNC CONTROL FANUC C1500B
1,500 WATT LASER RESONATOR
AUTOMATIC SHEET REPOSITIONING PROGRAMMABLE
ASSIST GAS CONTROL WORK CHUTE CHILLER DUST
COLLECTOR
OPERATES ON OXYGEN AND NITROGEN |
|
Ad # 14862 | Laser |
1996 |
Trumph |
TLF-2600 |
Good |
sold |
Photo /
More Info. |
2600 watts: Trumpf Model Traumatic L2503
SPECS
Sheet-W (In.):60 "
Sheet-L (In.):120 "
Wattage:2600 w
IPM:3300 cmpm
X-Travel:120 "
Y-Travel:60 "
Z-Travel:4 "
Control:BOSCH CC220
Brand:TRUMPF
Model:TRUMATIC L2503E
Type:Laser Cutters
Control:CNC (BOSCH CC220)
Year:1996
Condition:good
Location: NC
Description:
Trumpf Trumatic L2503E Laser, 2600 Watt,
Dual Pallet, Model TLF-2600 Turbo Table: 120” x
60” (5’x10’)Twin Pallet Power Supply: 2600 Watt
Laser 3/4” Max. Thickness Working area: X =118”
Y = 59.25” Z = 3.95” Control: Bosch CC220
Trumagraph RAPID TRAVERSE RATE = 2362 (330
SIMULTANEOUS) MACHINE POSITIONING DESIGN =
FLYING OPTIC Chillier Torrit Dust Collector
Machine Still under power for inspection
SPECIFICATIONS
Trumpf Trumatic L2503E Laser, 2600 Watt,
Twin Pallet,
Model TLF-2600 Turbo
Table: 120” x 60” (5’x10’)Twin Pallet
Power Supply:
2600 Watt Laser 3/4” Max. Thickness
Working area: X =118”
Y = 59.25”
Z = 3.95”
Control: Bosch CC220 Trumagraph
RAPID TRAVERSE RATE = 2362 (330
SIMULTANEOUS)
MACHINE POSITIONING DESIGN = FLYING OPTIC
Chillier
Shipping Info:
Rigging Fee and transportation buyers
responsibility
Weight:
23,000 lbs
Dimension:
approx 34 ft x 17 ft footprint
Note: machine has not ran in 2 years but
worked when power was removed, may take a
little TLC at start up to get going but we
priced it accordingly! Wattage at head reading
is a little low will need some work to get it
up to factory specs. |
|
Ad # 6932 | Laser |
1992 |
AMADA |
APELIO II 357 |
Excellent |
sold |
Photo /
More Info. |
AMADA MODEL APELIO II 357 COMBINATION CNC TURRET PUNCH & LASER: Same machine as AD# 6933 in CNC Turret Punch Category
AMADA MODEL APELIO II 357 COMBINATION CNC TURRET PUNCH & LASER
Capacity: 33 Ton
Maximum Laser Output: 1500 Watt
Maximum Material Thickness (Punch): 1/4" (Mild Steel)
Maximum Sheet Size: 50" x 144" (with Repositioning)
Maximum Axis Movement: x-72"; y-50"; z-11.8" (Laser)
Maximum Sheet Weight: 220 Lbs.
Maximum Feed Speeds: 1968 IPM (X & Y Axes); 472 IPM (Z-Axis)
Maximum Hit Rate: 200 HPM (on 1" Center Moves); Max. SPM: 350
Turret Speed: 30 RPM (Bi-Directional)
Turret Configuration: 58 Stations (Thick) - (36) 1/2"
Diameter.;
(12) 1-1/4" Dia.; (4) 2" Dia.; (2) 3-1/2" Dia.; (2) 4-1/2"
Dia.;
(2) Auto Index (1-1/4" Dia)
EQUIPPED WITH:
Fanuc 05PLA CNC Control
Fanuc 1500 Watt Laser; Chiller Unit
(2) Auto-Index Stations; Programmable Work Chute
Pneumatic Work Piece Clamping; Automatic Repositioning
Hydraulic Clutch & Brake; Tool Balancer |
|
Ad # 6916 | Laser |
1998 |
Amada |
Delta3015 |
Very Good |
Sold |
Photo /
More Info. |
3000 Watt, 5' x 10' Dual Pallet Tables, Flying Optic, Fanuc 16L 32 Bit: 3000 Watt, 5' x 10' Dual Pallet Tables, Flying Optic, Fanuc 16L 32 Bit CNC ... |
|
Ad # 12849 | Laser |
1998 |
Strippit |
Prima/Titan |
Good |
sold |
Photo /
More Info. |
3000 watt: Machine is in very good condition
fully dressed includes 20 ft of table on is a
shuttle feed , also 4 th rotary axis for cutting
structurals
includes chiller system
machine is ready to go
all new lines replaced last november |
|
Ad # 11671 | Laser |
2004 |
Trumpf |
Tubematic |
Very Good |
sold |
Photo /
More Info. |
Laser Tube Cutter 3,200 watt: (2004) Trumpf Tubematic laser tube cutter
3,200 watt
Max O.D.6 inch od 1/4 wall
Min O'D. 5/8"
21 foot loader with 10 foot unload tables
max length using unload is 120 inch but can be modified to to do longer length out of the back of the machine to a max of 240 inch.
4 axis
laser on hours 27,599
beam on hours 12,253
|
|
Ad # 8913 | Laser |
1998 |
Mitsubishi |
2512 LXP |
Good |
Sold |
Photo /
More Info. |
Travels 98.4" X 49.2" X 3.9": Laser Output: Continuos 2000 Watts
Pulse 3000 Watts
Travels: X-Axis 98.4"
Y-Axis 49.2"
Z-Axis 3.9"
Maximum Work Piece Size 48" x 96"
Rapid Feed Rate 2,362 IPM
Max Feed Cutting Rate 590 IPM
Equipped With:
Mitsubishi LC10BV CNC Control
3020D Resonator
Automatic Pallet Shuttle System
Chiller
|
|
Ad # 8914 | Laser |
1998 |
NTC 5 Axis Cutting |
TLM610 |
Good |
sold |
Photo /
More Info. |
Travels 6' X 10': Laser Resonator: PRC 2200W Model SL
Hours Aprox 20,000
PRC Serviced all internal and external Optics
3/2008
Including:Change Vacuum Pump Oil. Laser Tuning.
Machine Alignment
Koolant Koolers Chiller
Control Type: 04R
Table size 75" x 122"
Table height 27.5"
X-Axis 122"
Y-Axis 75"
Z-Axis 31"(From Table Top 3.9"-35"
Optical Head Front/ Back Travel
C-Axis =/- 200Degrees
Optical Head
A-Axis =/- 180Degrees
Optical Head
X, Y-Axis Rapid Feed Rate 1378"/Min
Z-axis Rapid Feed Rate 1181"/min.
C, A-axis apid Feed Rates 200° /sec.
Maximum Cutting Rate X, Y, Z-axis 1.2" -
1181"/min.
C, A-axis MAX 200°/sec.
Drive motors: AC servo
Drive types: Ball screw
Motion System, Linear ball guide ways
Positioning accuracy =/-0.04mm 0.0016") /300mm
(12")
Floor space W x L 168" x 308"
|
|
Ad # 8915 | Laser |
2000 |
NTC 5 Axis Cutting |
TLM-610 |
Good |
sold |
Photo /
More Info. |
Travels 6' X 10': Laser Resonator PRC 2200W Model STS
Hours Approximate 3000
Control Type: TDLC-04R
Table Size 75" x 122"
Table Height 27.5"
X-Axis 122"
Y-Axis 75"
Z-Axis 31" (from Table Top 3.9"-35"
Optical Head Front/ Back Travel
C-Axis+/-200Degrees
Optical Head
A-Axis +/- 180 Degree
Optical Head
X, Y Axis rapid Feed Rate 1378"/Min.
Z- Axis Rapid Feed Rate 1181"/Min.
C, A-Axis Apid Feed Rates 200 Degrees/ Seconds
Drive Motors: AC Servo
Drive Types: Ball Screw
Motion System, Linear Ball Guide Ways
Positioning Accuracy +/- 0.0016"/ 12"
Floor Space W x L 168" x 308"
|
|
Ad # 8921 | Laser |
1997 |
Trumpf |
L-2503 |
Good |
sold |
Photo /
More Info. |
Travels 118" X 59" X 4.5": Travels
X 118.1"
Y 59.1"
Z 4.5"
Maximum Positioning Speed 2632 Inches Per
Minute
Maximum Workpiece Weight 1528 Lbs.
Maximum Sheet Size 60" x 120"
Bosch CC 200 Trumagraph 32bit Multi Axis Control
Programmable Power Control
Hi-Resolution 9" Monochrome CRT
RS 232 Interface
Inch/Metric Programming, Custom Macro Capability
Equipped With Trumpf TLF 2600 Turbo 2600
WattResonator sn:445627
R-22 Refrigerant
460/3/60 33.4 AMP
Welded Steel Frame, Welded Aluminum Gantry
Linear Ball Bearing Guideways, Ballscrew Drives
Air Cooled Dual Circuit Chiller Rated to 105deg.
Ambient
Fume Collection System
Rittal Control Air Conditioner
40 KVA Transformer
Electrical Requirements
Laser 460/3/60 -116 AMPS
Chiller 460/3/60 -33.4 AMPS
Dust Collector 460/3/60 -12.5 AMPS
Oxygen 232 PSI
Clean Dry Air 87 PSI
Nitrogen 435 PSI
Machine Hours
2/21/2003 Replaced Resonator Due to:
Bad Bearing on Turbine at Laser42312 Beam24869
Resonator Hours At Shut Down on 7/23/2005 at:
Beam on 35640 Laser on 62690
7/25/2005 Laser Prof Decommissioned/Packed for
Ship
11,000 running hours |
|
Ad # 8912 | Laser |
1999 |
Mitsubishi |
2512 |
Good |
sold |
Photo /
More Info. |
Travels 98" X 49" X 3.9": Maximum Sheet Size 4 x 8'
Sheet Configuration Dual Pallet
Laser Design Flying Optic
Rated Power 3600 Watt
Maximum Power 5000 Watt
X-Axis Stroke 98"
Y-Axis Stroke 49"
Z-Axis Stroke 3.9"
Simulataneous Positioning Speed 4730IPM
Power Requirements
Laser 33 KVA
Control 8 KVA
Control Specifications
Mitsubishi LC20BP Control
3.5" Floppy Drive
RS232 Communications Port
Jog Pendant
Equipped With Mitsubishi Model ML5036D Laser
Resonator
Non-Contact Mitsubishi Cutting Head
Concoa Gas Regulators
Accuchiller Dual Circuit Chiller
(LaserCircuit&Optics)
Manuals
Installation and Training Available
Machine Dimensions
Main 166" X 97" X 78" H
Secondary Pallet 121" X 76" X35' H
Resonator 19" X 78" X 64" H
Chiller 56" X 34" X56" H
Approximate Power On Hours 28,627
Beam on Hours 13,593
Approximate Overall Machine Weight 7950 KG |
|
Ad # 8916 | Laser |
2000 |
NTC 5 Axis Cutting |
TLV-510 |
Good |
sold |
Photo /
More Info. |
: Laser system: Fanuc 1,500 Watt
Table size: 61” x 122”
Table height: 36”
Working stroke:
X-Axis: 122"
Y Axis 61"
Z Axis 6"
Rapid Feed Rate (X & Y Axis) 1,181 IPM
Rapid Feed Rate (Z Axis) 393 IPM
Cutting Feed Rate (X,Y & Z Axis) 787 IPM
Drive Motor AC Servo Motor
Drive Mechanism Ball Screws
Guide Mechanism Linear Ball Guide
Positioning accuracy: + 0.0008” / 12”
Floor space (W x L x H) 128” x 300”
Equipped With Fanuc C2000 1,500 watt Resonator
Chiller
Contact gap sensor
7.5” focal lens holder
Air dryer
Integrated stationary operation panel
Fanuc 16i-L CNC Controller
Manual jog handle
Material conveyor
Approximately 21,000 total hours
|
|
Ad # 8906 | Laser |
1998 |
Mazak |
NTX48 |
Good |
sold |
Photo /
More Info. |
Travels 96"X48"X3.9": Machine Design Hybrid
Resonator Panasonic
Maximum Laser Capacity 1500 Watt
Maximum Y Axis Travel 48"
Maximum X Axis Travel 96"
Maximum Z Axis Travel 3.9"
Number of Tables 1
Control Mazak L32 16Bit
Rapid Traverse Rate 945 Inches/Minute
Equipped With Chiller
Scrap Conveyor
Non-Contact-Type Capacitive Sensing Cutting Head
Panasonic Type 7 Resonator
Approximate/Overall Weight 21.600 Lbs.
Approximate/Overall Hours 30.969
Electrical Requirements 230/460.3.60
|
|
Ad # 8900 | Laser |
1999 |
Cincinnati |
CL-6 |
Good |
sold |
Photo /
More Info. |
Max Sheet Size 4' x 8': Max Sheet Size 4' x 8'
Sheet Configuration Dual Pallet
Resonator Wattage 1500
Equipped With GE Fanuc 160IL Windows NT Based
CNC Control
Dynamic Power Control
Hi Resolution 12" Color LCD
Inch/Metric Programming
1.6 GB Hard Drive
3.5" Floppy Drive
Cutom Macro Capability
Look Ahead Tool Path Error Compensation
GE Fanuc Model C1500, 1500 Watt RF Fast Axial
Flow Resonator
Dual Pallet Configuration
Brushless AC Servo Motors
Programmable High Pressure Assist Gas
Rigid Steel Frame Construction
Automatic Lubrication
Lasermech Non-Contact Cutting Head With 5 and
7 1/2" Cutting Lenses
Quick Adjust Material Clamps
Safety Lights and Mats
Scrap Removal System
Transformer
30 KVA, Primary 460V, Secondary 380V
Koolant Koolers 5K Chillers
460/3/60 25.7 AMPS
|
|
Ad # 8902 | Laser |
1998 |
Cincinnati |
CL707 |
Good |
Sold |
Photo /
More Info. |
Maximum Sheet Size 5' X 10': Maximum Sheet Size 5' X 10'
Sheet Configuration Dual Pallet
Laser Design Flying Optic
Maximum Positioning Speeds 10,000 Inches/Min
Resonator Wattage 2500
Control Features
Cincinnati 32 Bit CNC Controls
Windows NT Operating System
High Resolution 14" SVGA 14" Color CRT Monitor
3.5" Floppy Drive
CD-Rom Drive
Ethernet Network Interface
Modem
1.0 GB Part Program Storage
Unlimited Background Edit Capabilities
Equipped With High Speed Linear Brushless Motors
Rofin Sinar Model DC025, 2500 Watt Slab Resonator
Fume Blower
High Speed Z-Axis
Aluminum Honeycomb Gantry
Dynamic Power Control Auto Slow While Cornering
Rigid Steel Frame Construction
Automatic Lubrication on X and Y Axis
Non-Contact Break Away Head W/ 7 1/2" Lenses
7 1/2" Break Away Contact Head
Load Frame Drip Pan
Programmable Part Coolant
Custom Macro"s
Fume Collection Plenum With Fume Blower
Ball Transfer Load Clamps
Programmable High Pressure Assist Gas
Quick Adjust Material Clamps
Safety Lights and Mats
Scrap Removal System
|
|
Ad # 8892 | Laser |
2000 |
Amada Hybrid Pulsar |
2415 |
Good |
sold |
Photo /
More Info. |
61” x 198” Sheet Size: 2000 Watt
99” x 61” X, Y Travels
61” x 198” Sheet Size equipped With Fanuc 160i-L
CNC Control
Fanuc AF2000E 2000 Watt Resonator
Automatic Sheet Repositioning (2) Heads (Roller &
Non-Contact Sensor Head)
Koolant Koolers Chiller, Donaldson Torit Dust
Collector |
|
Ad # 8895 | Laser |
2004 |
Amada Apelio |
III 2510V |
Good |
sold |
Photo /
More Info. |
Maximum Sheet Size 50" x 196": Punching Capacity 22 Ton
Maximum Laser Output 4,000 Watt
Maximum Material Thickness (punch) 3/16"
Mild Steel)
Maximum Sheet Size 50" x 196"
(with 1 reposition)
Axis Travels: X-Axis 98”
Y-Axis 50”
Z-Axis 11.8”
Maximum Sheet Weight 330 Lbs
Table Axis FeedRate: X / Y-Axis 3937 / 3149 ipm
Z-Axis 1574 ipm
Maximum Hit Rate: 410 HPM .315” move
340 HPM 1" Move
Turret Configuration (thick) 31 Stations
3 Auto Index (2)-1-1/4”
(2)-1-1/4”
Equipped With Fanuc 160iL CNC Control
Upgraded Fanuc 4000 Watt Laser
Amada AS/ULX Automatic Load/Unload System
complete with 6 shelf storage tower
(3) Auto-Index Stations
Automatic Repositioning
Amnet 2000 Line Control Software
Fanuc Servos and Controller
Total “On the Fly” Cut Condition and Power Control
High Speed Non-Contact Capacitive Head
Ball Transfer Contact Head
B-Axis Automatic Focus Control
Work Chute size of 19.6” x 19.6”
3 Automatic Assist Gas Ports
High Pressure Assist Gas
Orion Chiller Unit
Torit Dust Collector
|
|
Ad # 8894 | Laser |
1996 |
Amada |
LC3015DII |
Good |
Sold |
Photo /
More Info. |
Max Sheet Size 60" x 120": Fanuc 16L CNC Control
Max Laser Output 2000 Watt
Travels: X-Axis 122"
Y-Axis 61"
Z-Axis 7.9"
Max Sheet Size 60" x 120"
Equipped With:
Fanuc 16L Cntrol
Fanuc C2000B Resonator
Non-Contact Hi Pressure Cutting Head
Chiller
Torit Downflow Dust Collector
Note: Blower Just Rebuilt & 12,000 Hour Refurb by Fanuc
|
|
Ad # 8897 | Laser |
2005 |
Bystronic Bystar |
3015 |
Good |
sold |
Photo /
More Info. |
Travels X 120" x Y 60" x Z 6.7" : Travels X 120" x Y 60" x Z 6.7"
Maximum Positioning Speeds X and Y Axis 3150" /
Min.
Simultaneous 4450" / Min.
Work Piece Weight 1962 Lbs.
Sheet Thickness
Mild Steel 1.0"
Stainless .75"
Aluminum .50"
Axel Acceleration 177"/ Sec 2
Standard Control Features
Bystronic Windows Based Multi Axis Control
15" Touchscreen Hi-Resolution Color Liquid Crystal
Disp
RJ45 Connector 10/100 MB it/s, 3.5" Floppy, 250
MB Zip Disk, CD-RW
Inch/Metric Programming, Custom Macro Capability
Equipped With Bylaser 5200 ARC, 5200 Watt Fast
Axial Flow Resonator
7.5" Cutting Lense
Moveable Scrap Trays
Torit Dust Collector
Gas Regulators
Chiller
Dual Pallet with Automatic Pallet Changer
Welded Steel Frame
Welded Aluminum Gantry
Automatic Sheet Edge Senson
Laser Resonator Gas Kit
Assist Gas Kit
Electrical Required Laser 460/3/60 AMPS
Chiller 460/3/60 AMPS
Dust Collector 460/3/60 AMPS
Air Required Clean Dry Air PSI
Nitrogen PSI
Oxygen PSI
|
|
Ad # 8893 | Laser |
2004 |
Amada |
FO-3015 |
Good |
Sold |
Photo /
More Info. |
Pallet Size 120" x 60": Maximum Laser Capacity 4,000 Watts
Number of Pallets 2
Pallet Size 120" x 60"
Y Axis Travel 122" (Max.)
X Axis Travel 61" (Max.)
Z Axis Travel 7.8" (Max.)
Rapid Traverse Rate 3,150 IPM
Equipped With Fanuc 16iL CNC Control
X Axis "Dual Drive" Rank and Pinoin Gantry
High Speed Pallet Shuttle System
Cast Iron Frame
Approximate: 27,978 Hours
Hours on Vane Pump and Blower (Approximate) 7,467 Hours
|
|
Ad # 15858 | Laser |
2012 |
Trumpf |
Fiber 1030 |
Good |
sold |
Photo /
More Info. |
Trumpf Fiber Laser: TRUMPF 1030 FIBER LASER 2000 WATT
Built in 2012
Pallet changer system
22350 hours
X axis--3000 mm(118"); Y axis--1500 mm(60"); Z axis-
-75 mm(3")
Enhanced productivity in thin sheets
Affordable entry into laser-welding
Low investment and operating costs
Extremely simple to operate |
|
Ad # 15857 | Laser |
2010 |
Trumpf |
7000 TO2 |
Good |
sold |
Photo /
More Info. |
Trumpf 7000 Tube Laser: (2010) Trumpf 7000 TO2 Laser
INSTALLED 10/2010
TRUMPF 7000 TO2
3600 WATT
30' LOAD
10" DIAM
20' UNLOAD CAN BE UP TO 30' BUT THAT WOULD
BE MANUAL UNLOAD
FRONT LOAD
SEAM SENSOR
SOFT TOUCH
SLEWABLE LOAD CONVEYORS
NO BEVELING
MACHINE ON HRS: 31,298
LASER ON HRS: 37,104
BEAM ON HRS: 12,097 (New Resonator 4 Yrs Ago)
NEW CHUCKS JUST INSTALLED
|
|
Ad # 11534 | Laser |
1992 |
Trumpf |
L3003 |
Fair |
sold |
Photo /
More Info. |
1510 x 3010 mm : Includes spare roots blower, resonators, chillers, dust collector & man... |
|
Ad # 11483 | Laser |
2008 |
MAZAK |
STX 2.5 |
Excellent |
sold |
Photo /
More Info. |
3000X1500 with palate changer: as good as new only 8000 hours
never been on service only regular treatment
need to be avacuate until 31/3/12 |
|
Ad # 6544 | Laser |
1997 |
Mazak |
STX510 |
Good |
Sold |
Photo /
More Info. |
5' x 10', 2000 watt, Mazak Laser Cutter: Capacity: up to 5/8" steel
2000 watt,
5x10 table |
|
Ad # 15550 | Laser |
2004 |
|
AMADA FO3015 NT |
Excellent |
sold |
Photo /
More Info. |
4000 Watts: Available:
AMADA FO3015 NT with AMS AUTOMATION, (Loader
and
unloader)
Specifications:
Year 2004, Capacity 4000 Watts, 73000 Hours
under power,
CO2.
-
|
|
Ad # 15939 | Laser |
2017 |
Coherent |
Meta 1C |
Good |
sold |
Photo /
More Info. |
50" x 50" 1000 Watt Co2: Coherent META 10C 1000 Watt CO2 Laser Cutting
System New June 2017.
We are installing a larger machine, this
machine will remain in production until sold.
The META 10C is a versatile cutting source for
cutting a wide range of materials including
metals, plastics, woods, synthetic and organic
materials.
Specifications
Laser Power/Peak Power1 (W) 1000/2500
Dimensions (L x W x H) 2083 x 2413 x 2083 mm
(82.0 x 95.0 x 82.0 in.)
Weight 1112 kg (2450 lbs.)
Cutting Height 1020 mm (40.0 in.)
Working Range x = 1270 mm (50.0 in.)
y = 1270 mm (50.0 in.)
z = 241 mm (9.5 in.)
Maximum Speed 50,800 mm (2000 in.)/min.
cutting
91,500 mm (3600 in.)/min. rapid positioning
91,500 mm (3600 in.)/min. raster engraving
Positioning Linear encoders with 2 micron
resolution in closed loop with brushless servo
motors
Accuracy 25 μm (0.001 in.) positioning
accuracy2
5 μm (0.0002 in.) repeatability
Contouring Full look-ahead contouring
capability
Materials Metal, Plastics, Wood, Paper,
Composites, Fabric, Rubber
Software Interface
Program including: Windows 7 support
G-code support
AI, DXF, HPGL, DWG, Gerber, JPG, BMP, TIF file
import
Full geometry editing
Editable database of laser parameters
Job estimator software
Job management software
Cutting Pallets Removable pallet system with
front and rear pass-through
Metal cutting points or honeycomb work support
Laser Power Control Digital laser power
control
Power proportional to velocity
Focusing Auto Focus, with Active Capacitive
following for metal
Exhaust/Vacuum Bed Bed vacuum material hold-
down plenum and part collection drawer
External high pressure exhaust blower
recommended (not supplied with system)
Cooling External chiller
PC/File Server Windows/Ethernet
Power (VAC) 380 to 440V, 47 to 63 Hz, three-
phase, 5 wire, 50A
Safety Safety interlocks on all covers and
enclosures
Class I system (Complies with 21 CFR Chapter 1,
Subchapter J)
User Controls Touch Screen Control panel
Jog, Bed height controls
Home, Park, Load buttons
Exhaust, gas assist controls
Editing of laser settings
Integrated HMI workstation
Auto restart
Metal Cutting Capabilities
Metal Type Assist Gas
Cut Speed: in/min
Mild Steel oxygen 0.250" 6mm
50
Stainless Steel oxygen 0.1875 4.8mm 60
Stainless Steel nitrogen 0.125" 3mm
50
Aluminum oxygen 0.125" 3mm
25
Brass oxygen 0.060" 1.5mm
100-120
The machine is located in our facility in
Florida. It is set up for production
use with Nitrogen and Oxygen gas assist. We
will be able to demo the machine prior to
purchase.
Sold as a complete system with Chiller and
Exhaust Blower.
Comes with 2 Cutting Tables, Honeycomb and
Steel Points.
No seller financing.
Buyer will be responsible for shipping costs
if
needed.
We will disconnect, crate and stage for a
shipper. |
|
Ad # 14713 | Laser |
1998 |
Trumpf |
L2503E |
Good |
SOLD |
Photo /
More Info. |
2600 watt : 60" x 120": 1998 Trumpf #L2503E laser
2600 watt resonator-tlf2600 turbo
chiller
light barrier
dust collector
beam on hrs: 18,881 as of 7-23-15
control: bosch
table size: 60" x 120"
Dissambly/label wires price 16-20 hrs needed-
estimated:$3200.00
> Laser machine and load out onto customer
> truck. Price based on one (1) day of assisting Service
> Technician in disassembling the Laser and the loading
> the next day.
rigging and loading fee $3500.00
|
|
Ad # 11444 | Laser |
1999 |
Trumpf |
L2530 |
Excellent |
sold |
Photo /
More Info. |
3000 Watts: 3000 Watt TRUMPF 2530 LASER Cutting System
Model: L2530 Year: 1999
Beam on hours 2222.
Machine On 6639 hours.
Specifications:
Watts 3000
Sheet Capacity4' x 8'
TravelsY Axis 100"
X Axis 50"
Z Axis 4.5"
Number of tables2 Auto Pallet Shuttle
Rapid Traverse Rate3346 IPM
Shipping Dimension103" FB x 247" LR x 93-1/2 H
24" x 32" x 81" H Cabinet
35" x 46" x 86" H Cabinet
32" x 69" x 81" Cabinet
108" x 139" x 36" H Table
24" x 24" x 30" Skid
Weight21,000 LB
Equipped With:
Flying Optics
Seimens CNC
Resonator TLF 3000T
TruTops Software
Light Curtains
|
|
Ad # 9530 | Laser |
1999 |
Mitsubishi |
LZP3015 |
Good |
Sold |
Photo /
More Info. |
3600 watt: (1999) (2) TO CHOOSE FROM
MITSUBISHI LASER CUTTING MACHINE
MODEL# LZP3015
3600 WATT
DUAL TABLE 5'X10'
62,300 HRS
UNDER POWER IN MICHIGAN
|
|
Ad # 13405 | Laser |
2004 |
Trumpf |
Trumatic L4050 w/ Liftmaster |
Good |
sold |
Photo /
More Info. |
1" thick 85" x 163" bed 5,000 watts: Trumpf Trumatic L4050 5,000 watt laser and
liftmaster material loader in working order, it
was prepared for shipping by a Trumpf service
technician and is ready to ship. Equipment was
installed at the original site 11/2004, and all
equipment for running (including two 2-1/2” & two
5” cutting heads) and transport are included.
TRUMPF TRUMATIC L4050, CNC LASER CUTTER
INSTALLED NEW IN NOVEMBER 2004
CAPACITY: 5000W
SHEET SIZE: 80" X 160"
X-AXIS TRAVEL: 160"
Y-AXIS TRAVEL: 80"
Z-AXIS TRAVEL: 4.5"
MAXIMUM WORKPIECE WEIGHT: 3968 LBS
SHEET THICKNESS (MILD STEEL): 0.98"
SHEET THICKNESS (AL): 0.59"
X / Y-AXIS POSITIONING SPEED: 7874 IPM
SIMULTANEOUS POSITIONING SPEED (X&Y-AXES): 11811
IPM
*****EQUIPPED WITH
SIEMENS SINUMERIK 840D CNC CONTROL W/ TFT COLOR
SCREEN
TRUMPF TLF 6000TM BEAM RESONATOR
LOADMASTER AUTOMATED LOADER SYSTEM
HI-LAS HIGH PRESSURE CUTTING
AUTOMATIC SHEET POSITION SENSING SYSTEM
APC HEIGHT REGULATION AND PROCESS CONTROL
PCS PROCESS CONTROL SYSTEM
POSITIONING LASER DIODE
PROGRAMMABLE CUTTING GAS SELECTION / PRESSURE
SETTING
PROGRAMMABLE POWER CYCLES
MICROWELD
PMS PLASMA SENSOR
SPRINTLAS FOR ALL SHEET THICKNESSES
AUTOMATIC NOZZLE CLEANING
LIGHT FITTINGS FOR WORK AREA
SAFETY DEVICES |
|
Ad # 9511 | Laser |
|
Trumph |
TLF 2000 |
Very Good |
SOLD |
Photo /
More Info. |
2000 Watt: Cuts 5' x 8'.
Trumph Trumatic L2503.
BKW resonator, model#WRK71/MT125TRO,
s#92072305. |
|
Ad # 14143 | Laser |
1994 |
Mazak |
Super Turbo X510-3D |
Good |
sold |
Photo /
More Info. |
1500 watt 5-Axis: (1994)
Mazak Super Turbo X510-3D
Serial# 100883
5-Axis
1500 watt
Travels: X: 129.1"
Y: 62"
Z: 40"
A: +/- 270
B: +/- 270
Control: Fanuc O-L
|
|
Ad # 12400 | Laser |
1996 |
Balliu |
LC1500 |
Good |
sold |
Photo /
More Info. |
126 x 60" ---1/2" thick: Balliu LC1500 laser cutter
Type of command CNC: Siemens
Longitudinal travel X-axis: 3100 mm / 126"
Cross travel Y-axis: 1500 mm/ 60"
Height trvel Z-axis: 250 mm/ 9.8"
Max cutting thickness in steel: 15 mm / 1/2"
plus
material shuttle / feed system includedMaximum
Laser Capacity 2200 Watt
less than 15,000 hrs total on machine
machine not currently under power
loading fee approx 1700.00
floor space needed 20' x 30'
Note:machine ran well when taken out of service
and was lubricated and alighned at that time
We also have a step up transformer to run off
230/3 included with machine
Owner needs the room thats why priced so low..
Note this machine may need a little TLC to run
again because it has been sitting for a few years
but ran well when taken out of service
Rigging/loading onto flatbed truck fee:$ 1800.00 |
|
Ad # 8510 | Laser |
1996 |
Prima |
PRC2200 |
Good |
sold |
Photo /
More Info. |
60 x 120 --2200 watt: Rated power: 2200
Maximum power: 2400
New in 1996
Pulse performance:
Gated pulse:
Frequency min-max: CW-2 kHz
Rise time: 30
Superpulse:
Frequency min-max: CW-1 kHz
Rise time: 30
Maximum peak power: 5060 w
Hyperpulse:
Frequency min-max: CW-1 kHz
Rise time: 30
Maximum peak power: 4400 w
Maximum average power: 2200 w
Pallet exchange system:
(2) Table size: 60” x 120”
Overall size: 215”” L x 170” W x 121” H
With pallet exchange system overall: 383” L
This laser has computer controls with Windows MMI v2.7 DO
Windows for workgroups 3.1. This also comes with a chiller.
Before the 2200 w PRC resonator was rebuilt 8 years ago by
PRC of New Jersey the hours were 20000. The laser hours
are 67988 total on resonator since 1996. It cuts up to ¼” thick
steel and also cuts in 3D mode 5-axis.
|
|
Ad # 6045 | Laser |
1991 |
AMADA |
Lasmac LC-644 II |
Excellent |
sold |
Photo /
More Info. |
laser Out Put 1000 watts(1200 Watts Max).: Axis Motion:X-axis 1000 mm,Y-axis 1000 mm,Z-axis
250mm,Sheet Thickness 9mm Mild Steel,Sus & 6mm
Stainless Steel,Max Sheet size 2000mmX1050mm by
repositioning & rotating,Work Shutter Size
500mmX500mm,Feed Speed:0~12M/min,Max Rate
40M/min,OLC-1000p Oscillator,CNC Control Fanuc O-
L,Attachments Dust Extractor etc.Positioning
Accuracy +,- 0.01mm,Cutting Materials
SPCC,SPHC,SECC,SUS,Fiber,Stainless
Steel,Wood,Nylon,Ceremics etc. |
|
Ad # 6044 | Laser |
1990 |
AMADA |
Lasmac LC-644 II |
Excellent |
sold |
Photo /
More Info. |
1000 Watts laser out put(max 1200 Watts): Axis Motion:X-axis 1000mm,Y-axis 1000mm,Z-Axis
250mm,Sheet thickness 9 mm Mild Steel,SUS &
Stainless Steel 6mm,Max Sheet Size 2000mmx1050mm
by repositioning & rotating,Work Shutter Size
500mmx500mm,Feed Speed:0~12M/min,Max Feed Rate
40M/min,OlC-1000p Oscillator,CNC Control Fanuc O-
MC,Attachments Dust Extractor etc.,Positioning
accurracy+,-0.01mm,Cutting
Materials:SPCC,SPHC,SECC,SUS,Fiber,Stainless
Steel,Wood,Nylon,Ceremics etc. |
|
Ad # 13348 | Laser |
1995 |
Balliu |
LC 1500/ 0G |
Good |
sold |
Photo /
More Info. |
5ft x 10ft: Balliu Laser
Siemens Control
5 ft x 10 ft
Max Cut
3/8" Mild
7 Ga Stainless
0.190 Aluminum
2200 Watt
Chiller
Koolant Koolers
HGV 7500 2 PR NF
7.5 HP
Laser
PRC 2200
SL 2200
Voltage 440 /3 phase
He 60
N2 60
Co2 60
Air 60 |
|
Ad # 14008 | Laser |
2000 |
Trumpf |
Tubematic |
Excellent |
SOLD |
Photo /
More Info. |
Tube Laser:6” round dia max tube size: Year (2000)
TRUMPF TUBEMATIC TUBE LASER
3000 watt laser
4- Axis
21’ load
10’ unload
6” round dia max tube size
Tube bundle sort with auto load
Latest available software updates
Dust collector
Chiller
|
|
Ad # 7646 | Laser |
1996 |
Prima |
Rapido |
Good |
sold |
Photo /
More Info. |
60" x 120" Prima Rapido 5-axis laser: Prima Rapido 5-axis laser
Chiller
2200W PRC resonator rebuilt 4 years ago by PRC of New
Jersey. Very reliable machine. 62,000 total hours on
resonator since 1996.
Table size is 60” by 120” in Flat cutting mode – also cuts in 3D
mode (5 Axis). Cuts up to ¼” thickness steel.
|
|
Ad # 16121 | Laser |
2006 |
Mazak |
STX-510 MKII |
Excellent |
sold |
Photo /
More Info. |
60"x120" 4000W: loaded machine when new. Every option available
General Specifications:Type Mazak Super Turbo
Laser Model No.Mark II Wattage 4000 Maximum
Sheet
Size 60X-Axis Prog. Stroke 127"Y-Axis Prog.
Stroke 61"Z-Axis Prog. Stroke 3.9"Rapid
Traverse
Speed (X, Y-Axis)945 IPM Maximum Cutting Speed
590 IPM Positioning Accuracy+/- 0.0004
Positioning Repeatability+/- 0.0002 Weight
Approx. (Lbs.)
30,798 Drive Motor AC Servo Year 2006 Machine
Hours (total)80,008
Additional Information:
Mazatrol L32BN Control
Side Air Blow (Jet Pierce)Autofocus torch
Auto Power Off Alarm Power Off Extended
Memory Extended Program Slots High Pressure Gas
Automation/loader Prep Rebuilt Conveyor Unit
New
Ballscrew Bearings
Refurbished Resonator and New optics included
in
sales price Machine is in Excellent Shape and
has
Been Gone thru by Mazak technician with 20
years
experience. |
|
Ad # 15788 | Laser |
1999 |
Mitsubishi |
3105 LXP/ML3020D |
Good |
sold |
Photo /
More Info. |
5ftx 10ft w/ cut cap.1/2" Steel: 1999 Mitsubishi 3105 LXP CO2 Laser cutter
3 axis cutting with z axis height adjust sensor
Power:2kw CO2 laser
Machine beam on hrs: 29,625 as of 5/122/18
5ft x 10ft cutting table w/shuttle sub table same size.
X & Y axis accurate new to : 0.05,Z less than 0.1 new
chip removal: drawer type
capacity:1/2" capacity mild steel
machine in good running condition
Resonator was recently completely rebuilt spent over 20k on it!..All good to go. |
|
Ad # 9329 | Laser |
1993 |
Mitsubishi |
2512HC |
Needs Work |
sold |
Photo /
More Info. |
1600 Watt, 3000 Watt peak, 4'x8': 1600 Watt continuous 3000 Watt Pulse
5 axis machine
Hypertherm non-contact upgrade in 2008
AQ0A08LX2 MC Chiller new in 2001
Torit Downflow model #DF 2DF4
5"-7.5" focal length
LC10B2 control simultaneous XYZ w/color
monitor
RS232
Resonator dims. 79"x19"x62"
96"x48" max. workpiece
Max Stroke X,Y,Z = 98.42"x49.20"x5.90"
Max rapid 30m/min, max feed 15m/min.
Air clamp
Mayfran conveyer
Control cab. dims. 42"x24"x69"
Demos welcome
Note:needs a blower,minor maint service.. |
|
Ad # 13962 | Laser |
1997 |
Amada |
2415 XL |
Good |
sold |
Photo /
More Info. |
1500 Watt: 1500 WATT AMADA PULSAR LC2415XLA2 CNC LASER
MFG: 1997 - APPROXIMATELY 52,000TOTAL HOURS
CNC Controller
Model: FANUC 16-L - 32 bit
Display: LCD Color Graphics Display
Control Function: X, Y,Z, and B Simultaneous 3
Axis and B axis Laser
Power Control
Input Method: MDI, Edit, DNC or 3" PC Compatible
Floppy Disk
Minimum Command Unit: 0.0001" (X, Y, Z)
Minimum Travel Unit: 0.0001" (X, Y, Z)
Standard Memory: 128K (320m)
Optional Memory: Expandable to 256K or 512K
Operating Modes: Automatic, MDI& Manual
Display Modes: Program Contents, Position
Information, Program Check, Settings, Parameters,
Beam Diameter Compensation, Assist Gas Status,
Self
Diagnostics: Interlock Displays Water
Temperature,
Gas Pressure, Vacuum Leak, Blower, Malfunction,
Shutter Power, Discharge, Assist Gas, Door Open,
Electrical Requirements: Included in Machine
Requirements
Motion Package
Travel Method: X axis for work piece movement, Y
axis for cutting head movement
Control Method: X, Y& Z simultaneous 3 axis
control and B axis
Drive Motors: FANUC AC Servo (X, Y, Z and B)
Maximum Sheet Size: 61" (Y) x 198" (X) with one
repositioning cycle
Maximum Axis Travel: 61" (Y) x 99" (X) x 11.8"
(Z)
x 0.78" (B)
Maximum Cutting Speed: 785 IPM (1)
Maximum Table Speed: 1575 IPM per axis (1)
Positioning Accuracy: 1: 0.0004" Repeat (1)
Repeatability: 0.0002" (1)
Maximum Material Weight: 727 lbs.
Maximum Material Thickness;
.375" Carbon Steel
.187" Stainless Steel (clean cut)
.125" Aluminum
Work Chute: 66" (Y) x 21" (X)
Assist Gas: 4 ports,
Electrical Requirements: 208 VAC, 3 phase, 60
Hz.,
75Kva
|
|
Ad # 11148 | Laser |
2005 |
Bystronic |
3015 byspeed |
Excellent |
sold |
Photo /
More Info. |
5200 watt: BYSPEED 3015 CUTTING MACHINE WITH 5200 WATT LASER RESONATOR
Machine Configuration
Shuttle Table
Non Contact Cutting Head
5.0" Lens Cartridge
7.5" Lens Cartridge
Cut Control
Bypos Auto-Focus
Cross Jet Nozzle
Back Reflection Isolation
Tool Kit
CPP (Controlled Pulsed Piercing)
5 x 10 Cutting Table
6 Cylinder Automatic Switch Over for 3 Gases, 2- CO2 -2- Nitrogen - 2- Helium
Bytrace Scanned Image Converter
Dust Collection System ( Torit type Dft2-8 )
Light Curtains in the Loading Area
Bytrans Line (Linear Load / Unload System
Bysoft Software with 2 Licences (1 for control, 1 for off- line programming
Advanced Sheet Separation including Spreader Magnets
Double Sheet Detection With Paging System and Modem
Installed New in late 2005
As of 3-25-2011
Cutting Time 8523
Power on 27,071
Under Power and Running
Also for Sale
New in 2005
Stainless Steel Chart 3000 Gallon Liquid Nitrogen Station
with 5 K Tri-Fecta and 6500 SCFH Standing Vaporizer
$ 60,000.00
|
|
Ad # 13860 | Laser |
2000 |
Amada Funuc |
FO3015 |
Good |
sold |
Photo /
More Info. |
4.0 KW: Laser was used in production up to the time it was
disconnected. Unit was refurbished in 2012.
Unit was disconnected by Amada in February 2014
to ship oversees but the deal fell through.
Amada technicians witnessed the laser in full
operation. Unit is completely disconnected ready
to be rigged.
Unit comes with the following:
FO3015 28,000lbs 24'x11'x9'Amada Laser
ADF3-185,000 lbs 12'8 x7'8x8'8 Dust Collector
RKL15000VA 2500 lbs 6'8x3'8x7'8CHILLER
LST3015A 7,500lbs - 10,000lbs15'2 x 8'8 x 4'1
Shuttle Table
|
|
Ad # 14550 | Laser |
1995 |
Trumpf |
TLF2200 turbo |
Good |
sold |
Photo /
More Info. |
1995 Trumpf 2200 Turbo Laser: 1995 Trumpf 2200 Turbo Laser
Trumpf 2200W laser
No. 445407
48000 beam on hours
95000 laser on hours
Bosch controller
460V 3 phase
Riedel E9253-L18/27 chiller
Luft-Technik Uni-STAR XMTOS dust collector
|
|
Ad # 14550 | Laser |
1995 |
Trumpf |
TLF2200 turbo |
Good |
sold |
Photo /
More Info. |
1995 Trumpf 2200 Turbo Laser: 1995 Trumpf 2200 Turbo Laser
Trumpf 2200W laser
No. 445407
48000 beam on hours
95000 laser on hours
Bosch controller
460V 3 phase
Riedel E9253-L18/27 chiller
Luft-Technik Uni-STAR XMTOS dust collector
|
|
Ad # 15072 | Laser |
2010 |
Coherent |
OmniBeam |
Good |
sold |
Photo /
More Info. |
400 watts: **MACHINE IS GOOD CONDITION, UNDER POWER, READY TO DEMO!**
We offering our 2011 OMNIBEAM Laser for sale.
Coherent OMNIBEAM Laser
400 watt CO2 Laser
Cutting area 48X48
Honeycomb cutting bed
PolyScience Chiller
Manual rolling pallet exchange table
CHS capacitive height sensor
Laserlink software
Under power in Berkeley Ca.
Bought new in 2011
2,019 job hours
recently overhauled on site by Coherent
$231,000 original purchase price
Coherent’s OMNIBEAM is a compact, powerful, laser cutting system targeted at metal cutting that is designed to be accurate and easy to use.
With a cutting area of 48” x 48” (1.23m x 1.23m) and 12” (300mm) of Z travel, it is capable of cutting stainless steel, mild steel, aluminum, titanium as well as plastics and organics.
Built on a sturdy, lightweight steel frame, the OMNIBEAM has excellent accuracy and repeatability
48” x 48” (1.23m x 1.23m) Cutting Area
Deep Moving Platform Bed with 12? (300mm) of Vertical Travel
Flying Optic Beam Delivery
Aluminum Honeycomb Material Support Platform
LaserLink Job Management/BeamHMI Control Software
Integrated Material Processing Database
Multi-process Capability
Industry’s Best Power Controller for Precision Cutting
|
|
Ad # 8229 | Laser |
2001 |
Amada |
F3015 |
Very Good |
Sold |
Photo /
More Info. |
4000 w Amada F-3015 Laser with six stage auto load/unload: 4kw 85 Kxa w Fanuc 160il controls Fanuc 4000E laser controls, 2 Amada LS780... |
|
Ad # 8230 | Laser |
1999 |
Amada |
APIII- 357V |
Excellent |
Sold |
Photo /
More Info. |
30 Ton/200 kw Hydraulic Punch and Laser Combo: Apollo 30 ton capacity 2 kw 57 kva laser woth 58 Turret punch station
Fanuc16L controls, Fanuc Type A04B- 0813 B301 200 v, 2- Axis XY controller, Koolant Coolers model# 10,000 PR- NF- FILT 10 hp compressor, 3hp pump R-22 refrigerant type cooler Amada Model MP 1225 NJ SN# 1225-4897 4400 lb capacity sheet feeder, scissor lift, and chip conveyors
|
|
Ad # 13144 | Laser |
1993 |
MAZAK |
SUPER TURBO-X48 HI-PRO |
Good |
sold |
Photo /
More Info. |
MAZAK SUPER TURBO-X48 HI-PRO: 1993 Mazak SUPER TURBO-X48 HI-PRO
CURRENT HOURS 62871
LAST REFURB 62350
OUTPUT 1500W
std specs below-please verify
Technical details
Sheet (WxL) 48" x 96"
Wattage 1500 Watt
X-Travel 103"
Y-Travel 50"
Z-Travel 3.900"
control: mazatrol L-32
Equipped With
Panasonic 1500 Watt Laser
5" Contact Cutting Head
Small Parts/Scrap Conveyor
Work Piece clamp Locator
Air Dryer
Assist Gas Changeover Equipment
Chiller Unit
|
|
Ad # 14521 | Laser |
1996 |
Trumpf |
TLF2600T |
Needs Work |
sold |
Photo /
More Info. |
120" x 60" Sheet: Trumpf # TLF2600T /laser
Good machine for spare parts.
Needs approx $60,000 of repairs
X-Axis Travel of 60"
Y-Axis Travel of 120"
Z-Axis Travel of 4"
|
|
Ad # 13114 | Laser |
1996 |
Nisshinbo |
11250HK |
Good |
sold |
Photo /
More Info. |
4" x 8": Nisshinbo LCM 1250HK Mk II
PRC LASER
SL 2200
Year 1996
Voltage 460
4ft x 8ft Table
NISSHINBO 32 Bit high speed multitasking
machine
control with graphic programming, RS-232C
Interface and 3.5" floppy disk drive.
Koolant Kooler High capacity chiller with
dual
cooling circuit.
|
|
Ad # 9165 | Laser |
1985 |
komatsu |
KLM-5051 |
Demo Machine |
sold |
Photo /
More Info. |
60 x 120-- CO2 laser: Control: fanuc 6mb
Description
This is a Komatsu,model KLM5051 laser machine with fanuc 6mb control. Dimensions of Material Worked Max work dimensions 60x120 Maximum cut thickness ss:15/32 sus:15/64 Machine Body Feed speed x,y Max 39'/min Cutting speed x,y Max 39'/min Position accuracy plus +or- 0.004" Cnc Unit Controlled axis x,y&z,3 axis individually or 2 axes simultaneously Minimum setting unit 7.9"x10.5" by combination of absolute and incremental Form fanuc 6mb Laser Oscillator Rated output 1250 w Beam mode Single/TEMoo as the main element Type of lazer,wavelength CO2,laser,10.6um Oscillation system Coaxal (axial flow type) Stability of output +or-2% Laser media H3,N2,CO2 Pulse width 0.1-990 m/sec Heat consumption (for cutting) 0.53 U.S gallons/minute Others circulary polarized light,gas producing unit,Beam shutter,Chiller unit (standard equipment) This unit is very nice it was a demo we bought it and by the time we got it here we did not need it anymore.So now we need the room and are looking to sell.You will need to arange for your own shipping.This unit only has 380 total hours this was a demo. |
|
Ad # 14517 | Laser |
1993 |
Trumpf |
Trumatic L2503 LaserCat |
Good |
sold |
Photo /
More Info. |
1600 Watts: Trumpf Trumatic L2503 LaserCat
TLF 1500 Turbo Resonator
Keller Luft Technik UNI-STAR XTOS Dust
Collection
System
Riedel L15/16 TR3/1.3 Chiller System
Bosch Controller
Resonator has not been rebuilt or replaced.
Electronics updated in 2010 |
|
Ad # 14517 | Laser |
1993 |
Trumpf |
Trumatic L2503 LaserCat |
Good |
sold |
Photo /
More Info. |
1600 Watts: Trumpf Trumatic L2503 LaserCat
TLF 1500 Turbo Resonator
Keller Luft Technik UNI-STAR XTOS Dust
Collection
System
Riedel L15/16 TR3/1.3 Chiller System
Bosch Controller
Resonator has not been rebuilt or replaced.
Electronics updated in 2010 |
|
Ad # 11857 | Laser |
2002 |
Trumpf |
TC6000L |
Excellent |
SOLD |
Photo /
More Info. |
COMBO LASER/PUNCH: Trumpf Trumatic TC6000L
TLF 3200 Watt Laser
AutoLas Plus
Add’l Cutting Head
ASC-Advance Stripper Control
Multitool Drive
Tapping Drive
High Speed Marking
Soft Punch
Pneumatic Repositioning Cylinders
Automatic Slug Conveyer
SheetMaster 1600
ITM-Intelligent Tool Manager
18 GFP Tool Cartridges & Die Plates
(2) Tapping Tools
Beam on – 2310 hours
Laser on – 15,414 hours
Machine on – 15,486.7 hours |
|
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|