| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10884 | Straighteners |
| 1997 |
RapidAir |
SC12E |
Excellent |
sold |
Photo /
More Info. |
| 12" RapidAir straightener: Powered coil stock straightener, 12" max width,
.015"-.050" thickness stock, 120v, 1hp motor, 0-825
in./min., 1.250" rolls, 5 upper/ 6 lower w/ dial
indicators, 1500 lb. pull cap.
Includes non-contact loop control system. |
|
| Ad # 12577 | Straighteners |
| — |
Littel |
626-5PD |
Good |
sold |
Photo /
More Info. |
| —: Littel Straightener
F.J. Littel Machine Company
Model 626-5PD
.125 thick x 24 wide |
|
| Ad # 5093 | Straighteners |
| — |
Rowe |
CSF6-30-20J |
Good |
sold |
Photo /
More Info. |
| Combination Coil Cradle/Straightener: MAX. COIL CAPACITY ------------------------ 20,000
LBS
MAX/MIN COIL THICKNESS --------------------
.170/.048
MAX. COIL WIDTH --------------------------- 30"
CRADLE ROLL DIAMETER ---------------------- 5"
STRAIGHTENER ROLL DIAMETER ---------------- 4"
ROLL CENTER SPACING ----------------------- 4-
1/2"
FEED RATE --------------------------------- 0 -
250 IPM
VOLTAGE -----------------------------------
460/3/60
-------------------------------------------------
-------------------------------
EQUIPPED WITH
- EMERSON INDUSTRIAL PLC-II CONTROL
-------------------------------------------------
-------------------------------
|
|
| Ad # 10474 | Straighteners |
| — |
Impco |
895-72 |
Good |
sold |
Photo /
More Info. |
| Impco Model 895-72 Shaft Straightening Machine: IMPCO Straightening Machine
Model# M895-72
S/N CHRA-177-1432
|
|
| Ad # 10474 | Straighteners |
| — |
Impco |
895-72 |
Good |
sold |
Photo /
More Info. |
| Impco Model 895-72 Shaft Straightening Machine: IMPCO Straightening Machine
Model# M895-72
S/N CHRA-177-1432
|
|
| Ad # 6223 | Straighteners |
| — |
Durant Tool Co. |
MD-10 |
Good |
sold |
Photo /
More Info. |
| Roll Straightener: Purchased used in 2000 |
|
| Ad # 12397 | Straighteners |
| 2002 |
Eitel |
SRP-25 |
Good |
sold |
No Photo /
More Info. |
| 25 ton: AUTOMATIC HYDRAULIC STRAIGHTENING PRESS
The SRP Model uses the basic C-frame design and
hydraulic components of our proven line of manual
straightening presses. The part is mounted on a
power driven table using linear slides for easy
positioning at each straightening point. Upgraded
to an ARP with the ORCA2 PC controls. Easy access
to tooling and flexibility are the trademark of
this model.
DESIGN
C- Frame design with rack and pinion driven table
mounted on linear rails.
CAPACITY
25 ton; with internal hydraulic power unit.
CONTROL
The Eitel Model ASP utilizes state of the art
control technology that employs Windows-based
computers in an open architecture. This,coupled
with our advanced straightening algorithms, make
for a platform with unparalleled performance with
regards to tight straightening tolerances, fast
cycle times, and high machine uptime.
|
|
| Ad # 12398 | Straighteners |
| 2002 |
Eitel |
SRP-25 |
Good |
sold |
Photo /
More Info. |
| 25 ton: AUTOMATIC HYDRAULIC STRAIGHTENING PRESS
The SRP Model uses the basic C-frame design and
hydraulic components of our proven line of manual
straightening presses. The part is mounted on a
power driven table using linear slides for easy
positioning at each straightening point. Upgraded
to an ARP with the ORCA2 PC controls. Easy access
to tooling and flexibility are the trademark of
this model.
DESIGN
C- Frame design with rack and pinion driven table
mounted on linear rails.
CAPACITY
25 ton; with internal hydraulic power unit.
CONTROL
The Eitel Model ASP utilizes state of the art
control technology that employs Windows-based
computers in an open architecture. This,coupled
with our advanced straightening algorithms, make
for a platform with unparalleled performance with
regards to tight straightening tolerances, fast
cycle times, and high machine uptime.
|
|
| Ad # 2806 | Straighteners |
| 1964 |
Littell |
308-7PDI |
Good |
sold |
Photo /
More Info. |
| Littell 8" Wide: Capacity: 8" Wide
Main Drive 1.5 HP
Voltage: 208/220/440/3/60
|
|
| Ad # 2805 | Straighteners |
| 89? |
Press Room Equipment |
PMS-1220-7DCA |
Good |
Sold |
Photo /
More Info. |
| Press Room Equipment 12" Wide x .125" : Capacity: 12" Wide x .125"
3 Over 4 Rolls Top & Bottom
Diameter of Rolls 2”
16-48 FPM
220 Volt Single Phase
2 HP 1750 RPM
Electric Vari-Speed
Gear Drive 5-1 Ratio |
|
| Ad # 2803 | Straighteners |
| — |
Durant |
FMD-30 |
Good |
sold |
Photo /
More Info. |
| Durant 30" Wide x .055": Max Thickness: .055 Min .020
Roll Spacing: 2-1/4”
Forward & Reverse
Strip Entry 42” From Floor
2” Dia Rolls ( 7 Roll )
Air Clutch
Entry & Exit Rolls
30-1 Gear Reducer
2 H.P. 230/460 Volt 3-Phase
Over All Size 48” High 15” Wide 36” Deep |
|
| Ad # 2804 | Straighteners |
| 1957 |
Littell |
418-5PD |
Good |
Sold |
Photo /
More Info. |
| Littell 18" Wide x .050": Capacity: 18" Wide x .050"
2 Over 3 Rolls
Rolls 3.125” Diameter
Vari-Speed Reeves Drive 8.5-48 FPM
Forward/Reverse/Direct Drive W/Loop Control
3 HP 220/440 3-Phase
1120 RPM W?14.4-1 Gear Reducer Ratio
Over All Size 52” High 42” Wide 37” Deep
|
|
| Ad # 4816 | Straighteners |
| — |
Rowe |
B-10 |
Very Good |
Sold |
Photo /
More Info. |
| ROWE 2500 CRADLE STRAIGHTENER: Capacity: 0.030" - 0.190" |
|
| Ad # 12116 | Straighteners |
| — |
— |
— |
— |
sold |
Photo /
More Info. |
| —: more to follow |
|
