Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15207 | Misc. Welding Equip. / Acc |
|
Pro weld |
800 |
Good |
sold |
Photo /
More Info. |
stud welder w/gun: Pro weld #800 stud welder w/gun
THE UNIT
The ARC-800is a compact and portable stud
welding power supply capable of welding studs
through 1/2” diameter weld base. The power
supply which operates on single phase power has
the added feature of weld current regulation
that improves stud welding consistency. Both
the weld time and weld current are infinitely
adjustable for preciseness and a shorted gun
solenoid or a faulty control cable, the
circuitwill prevent gun triggering and
eliminate damage to printed
circuit boards.
7.0 CONTROL PANEL DESCRIPTION
ON/OFF SWITCH
The ARC
-
800 is turned “ON” by turning the knob on the
switch to the “ON” position.
WELD TIME ADJUSTMENT
The weld timer regulates duration of the weld
current. The timer is calibrated in seconds fr
om .05 to .6 seconds.
WELD CURRENT ADJUSTMENT
The weld current is adjustable 100-900
Amperes.
GUN FAULT LED INDICATOR
The gun fault LED “on” indicates a shorted
gun solenoid or a
shorted control cable. The LED will stay “on”
and lock out
the gun from triggering.
TRIGGER LED
The trigger LED “on” indicates a complete
circuit to the unit through the gun control
cables and gun switch. This LED
will turn “on” whenever gun trigger is
pressed
peatability
manual/info
link:http://www.studweld.com/pdffiles/800man.pd
f |
|
Ad # 8766 | Misc. Welding Equip. / Acc |
|
Acorn |
|
Very Good |
Sold |
Photo /
More Info. |
5 ft x 8 ft..: 5 ft x 8 ft W/ stand |
|
Ad # 15815 | Misc. Welding Equip. / Acc |
|
many |
many |
Good |
sold |
Photo /
More Info. |
: Fabrication Equipment ..many machines..call.. |
|
Ad # 7585 | Misc. Welding Equip. / Acc |
|
MILLER |
BLUESTAR 6000 |
Excellent |
Sold |
Photo /
More Info. |
Welding Generater: JUST LIKE NEW....HARDLY USED...MILLER BLUESTAR 6000 WELDER GENERATOR W/ELEC... |
|
Ad # 15069 | Misc. Welding Equip. / Acc |
|
Misc |
|
Good |
sold |
Photo /
More Info. |
: Lot of Welding Equipment to Include:
(1) Phoenix Dry Rod Oven
(3) Saf-T-Carts
(5) Harris Flowmeters, Model: 55-AR-/CD70 1/4
(2) Harris Manifold Regulators Model: 3520-10 and
25-100C, With Miscellanous Hoses and Torches |
|
Ad # 7290 | Misc. Welding Equip. / Acc |
|
Studfast |
16DA-draw arc |
Fair |
sold |
Photo /
More Info. |
Stud welder 3mm-10mm capacity: M5-M16 studs
Cutlas clipper # 8 |
|
Ad # 11109 | Misc. Welding Equip. / Acc |
|
Phoenix |
700-BT |
Very Good |
sold |
Photo /
More Info. |
Powered flux oven / rod oven: This rod oven could easily be used for a powered flux oven as it will hold ... |
|
Ad # 10744 | Misc. Welding Equip. / Acc |
|
Acorn & others |
various |
Good |
Sold |
Photo /
More Info. |
Acorn style welding platens/tables-all sizes: Some tables are Acorn brand others are not
4' x 4' ---3 pcs---1295.00ea
5 x 5' ---25pc-1495.00 ea
6' x 5'---20pc-1750.00ea
We can remove legs and load on truck.
Some with perimeter frames, some with angle legs and some with no legs.
Some acorn style tables have a 1-3/4", 1-5/8" or 1-1/2" square hole in them.... |
|
Ad # 11617 | Misc. Welding Equip. / Acc |
|
shreiber |
500 ac |
Very Good |
sold |
Photo /
More Info. |
60,000 btu: water pump..2 1/2 hp...compressor 5hp..rate of flow 40 g per min |
|
Ad # 7584 | Misc. Welding Equip. / Acc |
|
MILLER |
3035 |
Excellent |
sold |
No Photo /
More Info. |
: EXCELLENT CONDITION!!!!....MILLER 3035 WITH SGA
100....CONTROL UNIT IS NEW....USED "ONCE" TO TEST IF
IT WORKS....IN STORAGE EVER SINCE |
|
Ad # 11703 | Misc. Welding Equip. / Acc |
|
Hobart Welders |
Universal Cart |
New |
sold |
Photo /
More Info. |
: Hobart Universal Portable Welder Cart
Accepts most portable wire feed welders
Accepts gas bottles up to 7" diameter/75lb.
Heavy duty construction |
|
Ad # 11248 | Misc. Welding Equip. / Acc |
|
|
|
Fair |
sold |
Photo /
More Info. |
many sizes--tank rollers: tank rollers
many sizes
see pix
|
|
Ad # 10943 | Misc. Welding Equip. / Acc |
|
Ransome |
12x12manipulator |
Very Good |
sold |
Photo /
More Info. |
12 FT. x 12ft Manipulator: 12 ft x 12 ft
all tooling we have with it
The basic machine is in good condition. I have 24 new Cam-Rol bearings that I was going to install but decided we did not need the unit as it is really too small for what we currently manufacture. The machine will need a forward/reverse contactor for boom up/down. It will also need a 1/2 HP DC drive motor and electronic controller plus a right angle gearbox and pinion for the boom in/out operation. I would need to spend about $1000.00 to purchase and install all of the parts it needs to be 100% usable. The new Cam-Rol bearings are worth $1000.00 alone. The 12' x 12' means it will weld a tank or whatever on a set of turn rolls that could be as much as 12' in diameter plus |
|
Ad # 15526 | Misc. Welding Equip. / Acc |
|
Jones and Lamson |
Model 6 |
Good |
sold |
Photo /
More Info. |
#6: Vintage Jones and Lamson No. 6 two turret lathe,
and although there is some cosmetic wear, it is
fully functional and runs beautifully. |
|
Ad # 3457 | Misc. Welding Equip. / Acc |
|
Acorn & Others |
Variuos Sizes |
Good |
sold |
Photo /
More Info. |
Welding tables - Various Sizes: Available now:
5' x 5' ----$1500.00
1) 1 off 5' x 6' x 6" ACORN/Weldsale ect Tables on stand # $1750"ea
Work Height: 36"
Manufacturer not know:
2) 1 off 5' x 12' x 6" NO Stand (in 2 x 6' Sections)
3) 1 off 5' x 15' x 6" with Stand (3 x 5' Sections)
Work Height: 32"
4) 1 off 5' x 18' x 6" with Stand (3 x 6' Sections)
Work Height: 30"
Square Tooling Holes are 1-5/8" on ALL tables |
|
Ad # 11083 | Misc. Welding Equip. / Acc |
|
Dry-Rod |
|
Good |
sold |
Photo /
More Info. |
welding rod ovens: 19-units total units available -
17-Dry Rod brand ovens-450.00each2 unknown brand
Note: all but 2 are dry rod brand name units
These rod ovens are typical of what most shops would need
1 phase most are 120 volts but some are 120/240 850 watts on some 1000 watts
on others
Capacity 350 lbs of rods
Temperature range 100-550 degrees F
Quantity of 2 unknown brand at this time but very similar to Phoenix type 300:
These rod ovens are typical of what most shops would need
Voltage and wattage unknown but should be 120 or 120/240
Capacity 350 lbs of rods
Temperature 100-550 degrees F is most likely
|
|
Ad # 7872 | Misc. Welding Equip. / Acc |
07 |
bernard |
mlg gun |
New |
SOLD |
Photo /
More Info. |
: bernard gun , top of the line, not the cheap one, long neck, for to much he... |
|
Ad # 997 | Misc. Welding Equip. / Acc |
90's |
Permea |
1100 |
Like New |
Sold |
Photo /
More Info. |
Nitrogen Generator-Make your own Gas!: Like new, never used! |
|
Ad # 13276 | Misc. Welding Equip. / Acc |
200? |
Cypress Welding |
MM1 |
Excellent |
sold |
Photo /
More Info. |
pipe cutter:38 foot bed, 4" to 16" diameter: Cypress Welding-Pipe cutter # MM1
cutting dia: 4"-16" OD
Load cap: 2200 lbs
input power: 115 vac/220 vac
cut types: saddle cuts, offset from centerline
hillside
lateral cuts, mitre cuts, hole cuts
custom shape programmable
hand held terminal for programming
does not include torch unit
more info:
unit rotates the pipe on its roller bed with a
three jaw chuck while simultaneously moving a
cutting torch(not supplied) back and forth along
the pipes axis.Pre-programmed shapes such as
saddle, hillside, lateral, mitre cuts can be made
by simply selecting the type of cut from the menu,
then enter the diameters of the pipe and press the
run buttonto cut pipe. No need for templetes, no
time consuming layout or calculations to do, in
addition irregular or uncommon shapes can be
plotted , programmed and saved for future use.
additional pipe bed extensions can be added up to
38ft. The method of cutting is oxy-fuel or plasma-
buyer supplied
Machine comes with one control head and two pipe
bed extension beds. Each 38 feet long.
Machine has less than 20 hours. |
|
Ad # 15204 | Misc. Welding Equip. / Acc |
1996 |
Dukane |
220 |
Good |
sold |
Photo /
More Info. |
2000watts: Dukane #220:S/N#43A260-vs109295 plastic press/thruster system
controller: DPC 4 plus
wattage:3300
frequency:20khz
features the narrow profile Model 220
press/thruster and Dynamic Process Controller.
Like the Model 210, the Model 220 can be used
as a benchtop press or as a thruster mounted in
multihead or automated systems.
Narrow 4.5" (114mm) width for
close center-to-center thruster positioning
Exclusive dual pressure capability
Full range of process controls
7-inch stroke with adjustable
bottom stop
High-performance Magnum™
transducer is standard
Power levels from 500 to 2200
watts
std specs below:
stroke:7"
usable throat:8.5"
col c.l. to horn c.l.:height:39.3"
width:3.5"
base:18.56"
thruster only:31" x 3.48"
manuals included
more info at
http://www.dukane.com/us/PPL_220.htm
note:cost new $24,000, less than 40 hrs
on unit
|
|
Ad # 14645 | Misc. Welding Equip. / Acc |
2000 |
Miller |
CP-252TS |
Good |
sold |
Photo /
More Info. |
: Miller Arc Welder |
|
Ad # 6548 | Misc. Welding Equip. / Acc |
2002 |
nelson |
100 |
Excellent |
sold |
No Photo /
More Info. |
7/8 stud Welder: This machine was used to used to shoot 2000 studs it
is almost new. used about 40 hrs. in great
condition.Has been in storage ever since. |
|
Ad # 15070 | Misc. Welding Equip. / Acc |
2013 |
Lincoln |
V350 |
Good |
sold |
Photo /
More Info. |
: 2013 Lincoln Invertec V350 Pro 6-Pack Rack
(6) 2013 Lincoln LF-72 Wire Feeders
V350 Pro Serial Nos:
U11303092931, U1130311599, U1130311600,
U1130311601, U11303602, U11303603
LF-72 Serial Nos:
U1130304408, U1130308502, U1130308503,
U1130309705,
U1130309708, U1130309709 |
|