Year:
| 2005
|
Make:
| spartan
|
Model:
| IW66D
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 4000
|
Dimension: L x W x H | 6x3x6 ft |
Machine Location:
|
City: |
On Request
|
State: |
New Hampshire
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 60 Ton capacity
this is a dual station ironworker STANDARD SPARTAN IW66D / IW66DX, HEAVY-DUTY, DUAL CYLINDER, COMPLETELY INTEGRATED IRONWORKER WITH 66 TON CAPACITY, 7-1/2 H.P., 12" THROAT (IW66D) - 20" THROAT (IW66DX), 5 WORK STATIONS AND FULL CONTROL FOOT PEDAL
Capacities & Specifications Rated on 65,000 PSI Tensile
PUNCHING Punch Pressure: 66 tons. Punch Holder and Jog Mode Punch Work Table: Includes back gauge and adjustable stops. Adjustable See-Through Punch Stripper: For fast and easy setup. Die Holder: Adjustable in machined T-slots for quick punch and die alignment. Standard Tooling: 1-1/2" in 3/8" material. CPD Series: 26 punch, 62 die. Large Tooling: 2" in 5/16" material. CPD Series: SP51P punch, SP80D die. Optional Oversize Tooling: 6" in 3/32" material. Maximum Channel Flange: 7". Throat Depth: 12" (D); 20" (DX). Stroke Length: 3-15/16". Cycles per Minute in 3/4": 30. Punching Station Work Height: 39-3/4".
FLAT BAR SHEARING
Flat Bar Shear Capacity: 14" in 9/16". Maximum Width x Thickness: 10" in 3/4". Lower Blade: Four (4) usable edges. Support Table: Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right. Adjustable Hold-Down: Holds work piece securely in position when shearing. Upper Shear Blade: Provides for minimum distortion. Two (2) usable edges. Blade Length: 14-1/4". Angle Flange Trim: 4". Flat Bar Shear Work Height: 36".
ANGLE SHEARING
Maximum Capacity – 90 degrees: 5" x 5" x 1/2". Maximum Capacity – 45 degrees: 2-1/2" x 2-1/2" x 5/16". Shearing with no material loss and minimum deformity. Shear Blades: Four (4) usable edges. Angle Shear Work Height: 43-3/4". BAR SHEARING
Round Bar Max. Capacity: 1-1/2". Square Bar Max. Capacity: 1-1/2" x 1-1/2". Five Cavity Round and Square Bar Shear Sizes: Round 1/2", 1", 1-1/2" Square 3/4", 1-1/2". Channel Shear Max. (optional): 5". I-Beam Shear Max. (optional): 5". Bar Shear Work Height: 48".
NOTCHING
Rectangular Notcher: 2" x 3-1/2" in 5/16" material. Electrical Interlock Safety Guard Gauge Table with Stops: For precise positioning. Adjustable See-Through Cover Notcher Work Height: 36-1/4".
OTHER STANDARD EQUIPMENT
Five (5) Sets of Punches and Dies: Punches: 9/16", 11/16", 13/16", 15/16", 1-1/16" Dies: 19/32", 23/32", 27/32", 31/32", 1-3/32" CPD Series 26 punch, 62 die Magnetic Base Work Light Adjustable Electric Back Gauge (36") 24 Volt DC Control Voltage Scrap Boxes at Punching and Notching Stations Adjustable Stroke Depth at Punch Full-Control Foot Pedals Two (2) Piece Gauging Table at Punch Station Keyed Punch Holder for Shaped Tooling Standard Voltage 230 Volt/460 Volt, 3 Phase, 60Hz Machine Net Weight: (D) 3,969 lbs.; (DX), 4,851 lbs. Machine Dimensions: (D) 68" L X31" W X67" H;
(DX) 82"L X31" W X67" H Two Hole Die Holder (Standard/Large)
includes 3ft brake acc.-some sq punches 3/8 , 5/16 and a few more.. includes a single phase converter but wired 220/3 phase
|
Electrical Description |
- 1phs and 3phs 208/240 has conveter
|
Comments: |
- less than 150hrs on machine..great condition
|
|