Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9922 | Ironworkers |
2005 |
spartan |
IW66D |
Excellent |
Sold |
Photo /
More Info. |
60 tons: 60 Ton capacity
this is a dual station ironworker
STANDARD SPARTAN IW66D / IW66DX, HEAVY-DUTY, DUAL CYLINDER, COMPLETELY INTEGRATED
IRONWORKER WITH 66 TON CAPACITY, 7-1/2 H.P., 12" THROAT (IW66D) - 20" THROAT (IW66DX),
5 WORK STATIONS AND FULL CONTROL FOOT PEDAL
Capacities & Specifications Rated on 65,000 PSI Tensile
PUNCHING
Punch Pressure: 66 tons.
Punch Holder and Jog Mode
Punch Work Table: Includes back gauge and
adjustable stops.
Adjustable See-Through Punch Stripper: For fast
and
easy setup.
Die Holder: Adjustable in machined T-slots for quick
punch and die alignment.
Standard Tooling: 1-1/2" in 3/8" material.
CPD Series: 26 punch, 62 die.
Large Tooling: 2" in 5/16" material.
CPD Series: SP51P punch, SP80D die.
Optional Oversize Tooling: 6" in 3/32" material.
Maximum Channel Flange: 7".
Throat Depth: 12" (D); 20" (DX).
Stroke Length: 3-15/16".
Cycles per Minute in 3/4": 30.
Punching Station Work Height: 39-3/4".
FLAT BAR SHEARING
Flat Bar Shear Capacity: 14" in 9/16".
Maximum Width x Thickness: 10" in 3/4".
Lower Blade: Four (4) usable edges.
Support Table: Includes guides for accurate
positioning and indicator lines at 30 and 45 degrees
left and right.
Adjustable Hold-Down: Holds work piece securely in
position when shearing.
Upper Shear Blade: Provides for minimum distortion.
Two (2) usable edges.
Blade Length: 14-1/4".
Angle Flange Trim: 4".
Flat Bar Shear Work Height: 36".
ANGLE SHEARING
Maximum Capacity – 90 degrees: 5" x 5" x 1/2".
Maximum Capacity – 45 degrees: 2-1/2" x 2-1/2" x
5/16".
Shearing with no material loss and minimum
deformity.
Shear Blades: Four (4) usable edges.
Angle Shear Work Height: 43-3/4".
BAR SHEARING
Round Bar Max. Capacity: 1-1/2".
Square Bar Max. Capacity: 1-1/2" x 1-1/2".
Five Cavity Round and Square Bar Shear Sizes:
Round 1/2", 1", 1-1/2"
Square 3/4", 1-1/2".
Channel Shear Max. (optional): 5".
I-Beam Shear Max. (optional): 5".
Bar Shear Work Height: 48".
NOTCHING
Rectangular Notcher: 2" x 3-1/2" in 5/16" material.
Electrical Interlock Safety Guard
Gauge Table with Stops: For precise positioning.
Adjustable See-Through Cover
Notcher Work Height: 36-1/4".
OTHER STANDARD EQUIPMENT
Five (5) Sets of Punches and Dies:
Punches: 9/16", 11/16", 13/16", 15/16", 1-1/16"
Dies: 19/32", 23/32", 27/32", 31/32", 1-3/32"
CPD Series 26 punch, 62 die
Magnetic Base Work Light
Adjustable Electric Back Gauge (36")
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Full-Control Foot Pedals
Two (2) Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230 Volt/460 Volt, 3 Phase, 60Hz
Machine Net Weight: (D) 3,969 lbs.; (DX), 4,851 lbs.
Machine Dimensions: (D) 68" L X31" W X67" H;
(DX) 82"L X31" W X67" H
Two Hole Die Holder (Standard/Large)
includes 3ft brake acc.-some sq punches 3/8 , 5/16 and a few more..
includes a single phase converter but wired 220/3 phase
|
|
Ad # 12999 | Ironworkers |
1997 |
Scotchman |
4014C |
Excellent |
sold |
Photo /
More Info. |
: 1997 Scotchman Ironworker # 4014C
Specifications:• Capacity (tonnage) 40
• Throat 6"
• Shears:
Angle @ 90 deg 3" x 3" x 5/16"
Miter (45°) 2" x 2" x 1/4"
40 strokes per min max
• Hole Punching capacities:
3/4 Mild steel 5/8"
1/2" Mild steel 1"
3/8" Mild steel 1-1/4"
• Flat bar shear:
1/2" Mild steel 8"
3/8" Mild Steel 10"
1/4" Mild Steel 12"
3/16" Mild steel 14"
14" max flat bar shear
includes 12" brake, angle iron shear..as shown
deluxe punch kit-lots of them approx 25-all new punches
machine like new never used |
|
Ad # 6981 | Ironworkers |
1959 |
BUFFALO |
NO. 2-1/2 |
Good |
sold |
Photo /
More Info. |
USED BUFFALO NO. 2-1/2 UNIVERSAL IRONWORKER: USED BUFFALO NO. 2-1/2 UNIVERSAL IRONWORKER
RAM PUNCH PRESSURE: 105 TONS
STROKES PER MINUTE: 44
DEPTH OF THROAT: 24"
SHEAR: 8" X 7/8" FLATS
3/4" PLATE
14" LENGTH OF KNIVES
24-1/4" WORK HEIGHT
PUNCH: 1-3/16" X 7/8"
1" X 1"
38-3/4" WORK HEIGHT
BAR CUTTER: 6" X 6" X 1/2" ANGLES 90 DEGREES
4" X 4" X 1/2" ANGLES 45 DEGREES
2-1/4" ROUNDS
2" SQUARES
45-3/8" WORK HEIGHT
BUILT IN 90 DEGREE NOTCHER ON PUNCH HEAD:
3" X 7/16" ANGLES
7/16" PLATE
3-1/4" DEPTH OF CUT
54-1/2" WORK HEIGHT
BUILT IN SQUARE COPER ON SHEAR END:
4" X 1/2" ANGLES
1/2" PLATE
2-1/4" WIDTH OF CUT
3-1/2" DEPTH OF CUT
48-1/4" WORK HEIGHT
ONE-SHOT LUBRICATION
MOTOR: 7-1/2 HP 1760 RPM |
|
Ad # 14468 | Ironworkers |
80's? |
Iron crafter |
30-30 |
Good |
sold |
Photo /
More Info. |
30 ton-single phase 110/1: Iron Worker: Iron Crafter
single phase 110/1
Model 30-30
30 Ton
2” stroke
capacities:
punch: 1" hole thru 3/8" MS\ild steel
flat bar:1/2" x 6"
angle iron:3" x 3" x 1/4"
mitre angle iron @ 45 deg : 2 x 2 x 1/4"
round:1"
square: 3/4"
120V single phase
Large quantity of tooling over 75
punches & dies many new also oversize hole punch
plate tooling and cusom punch holder table. Great
home shop or farm machine!
|
|
Ad # 13708 | Ironworkers |
1977 |
Metal Muncher |
MM61C |
Good |
sold |
Photo /
More Info. |
49 Ton: Metal Muncher Ironworker 49 Ton
Model: MM61C
Capacity: 49 Ton
Volts: 220 / Single Phase
RATED PUNCHING CAP:49 TON
DIA/THICKNESS: 1-1/16" IN 1/2"
1-3/8" IN 3/4"
BAR SHEAR: 1" X 6", 1/2" X 12"
ANGLE SHEAR: 4" X 4" X 3/8"
COPER SQUARE NOTCHER. 3" X 3" X 3/8"
THROAT: 9"
BED SLOT WIDTH: 4"
OPERATING PRESSURE: 3500 PSI
MOTOR: 7HP
|
|
Ad # 9825 | Ironworkers |
|
|
|
|
Sold |
Photo /
More Info. |
WEIDEMANN 12 POSITION TURRET PUNCH : IN EXCELLENT SHAPE |
|
Ad # 9815 | Ironworkers |
2008 |
Pirahna |
P50 |
Excellent |
Sold |
Photo /
More Info. |
50 Ton: |
|
Ad # 9811 | Ironworkers |
2007 |
Edwards |
65 Tion |
Fair |
sold |
Photo /
More Info. |
: 2007 Edwards Ironworker, 65 Ton, S/N 3886507, 3Ph, 440V, 60Hz, 9-3/4" Throa... |
|
Ad # 5498 | Ironworkers |
1982 |
MUBEA |
HIW600 |
Good |
SOLD |
Photo /
More Info. |
66 TON MUBEA HYDRAULIC IRONWORKER: PUNCH CAPACITIES:
TONS ------------------------------------ 66
DIAMETER THRU THICKNESS ----- 1-1/8" THRU 11/16"
DIAMETER THRU THICKNESS ----- 15/16" THRU 7/8"
THROAT DEPTH ------------------------------ 10"
LENGTH OF STROKE -------------------------- 4"
SHEARING CAPACITIES:
ANGLES, 90 DEGREE --------------- 5" X 5" X 1/2"
ROUND BARS ------------------------------ 1-3/8"
SQUARE BARS ----------------------------- 1-1/4"
FLAT BARS ------------------------- 8" X 1"
FLAT BARS ------------------------- 18" X 1/2"
MAIN DRIVE MOTOR --------------------- 10 HP A.C.
EQUIPPED WITH ---
2 SLIDES
5 WORK STATIONS
COPER/NOTCHER
2 FOOT CONTROLS |
|
Ad # 5497 | Ironworkers |
1974 |
MUBEA |
"OPTIMA" 48-4 |
Good |
SOLD |
Photo /
More Info. |
48 TON MUBEA "OPTIMA" 48-4 UNIVERSAL MECHANICAL IRONWORKER: WITH 3 CLUTCHES
PUNCHING CAPACITY -------------- 48 TONS
1-1/8" THRU 1/2"
1" THRU 9/16"
THROAT DEPTH ---------------------- 12-5/8"
SECTION SHEAR:
4" X 4" X 3/8" ANGLES AT 90 DEG.
2-1/2" X 2-1/2" X 5/16" ANGLES AT 45 DEG.
3-1/2" X 3/8" TEES
PLATE SHEAR WITH STANDARD 2-1/2 DEG. BLADE:
7-1/2" X 5/16"
3-1/2" X 1/2"
BAR SHEAR:
ROUND 1-3/8"
SQUARE 1-1/4"
COPER NOTCHER:
REGULAR COPING, ANGLES 3" X 5/16"
TRIANGULAR NOTCHING, ANGLES 2-1/2" X 5/16"
STROKES PER MINUTE ------------------------ 55 SPM
MOTOR -------------------------- 2 HP 220/3/60
EQUIPPED WITH ---
EXTRA BLADES AND BIG ASSORTMENT OF PUNCHES |
|
Ad # 10910 | Ironworkers |
1998 |
clausing |
mm70 |
Very Good |
sold |
Photo /
More Info. |
70 ton: comes with tooling |
|
Ad # 10905 | Ironworkers |
2004 |
piranha |
p50 |
Very Good |
sold |
Photo /
More Info. |
piranha p50 ton: click link for specs
http://www.piranhafab.com/ |
|
Ad # 9772 | Ironworkers |
2004 |
Scotchman |
4014-CM |
Very Good |
Sold |
Photo /
More Info. |
40 ton: 40 ton punch press/flat shear/angle shear. throat depth 6", flat shear leng... |
|
Ad # 9767 | Ironworkers |
|
Hill Acme Kling |
No. 5 |
Good |
SOLD |
Photo /
More Info. |
80: Plates up to 5/8
Flat bars up to 3/4x6
Square bars up to 1 3/4
Round bars up to 1 7/8
Angles square up to 5x5x1/2
Max punch 1 1/16 hole thru 3/4 plate |
|
Ad # 12857 | Ironworkers |
? |
Geka |
Micro Crop 36 |
Good |
sold |
Photo /
More Info. |
36 ton cap-Mild Steel: Geka Ironworker
Micro Crop 36
90 Degree Max. 3" x 3" x 5/16
45 Degree Max. 2" x 2"
220/440 Voltage
60 Cycle
Made in Spain
Capacity: Mild Steel
low hrs little use |
|
Ad # 11691 | Ironworkers |
|
Geka |
HYD-50, 50/A |
Excellent |
sold |
Photo /
More Info. |
50 ton: GEKA HYDRACROP HYD-50 HYDRAULIC IRONWORKER. This machine just recently came... |
|
Ad # 4189 | Ironworkers |
1990 |
GEKA |
Geka Hydracrop #55A |
Very Good |
Sold |
No Photo /
More Info. |
GEKA 55-TON HYDRAULIC IRONWORKER :
IRONWORKERS
4" x 4" x 1/2" Geka Hydracrop #55A ,55 Ton, 20"thr,work tbl.w/gauge,12" shear
Capacity 55 Tons
Shear Capacities:
Maximum Flats: 5/8" x 12" or 3/4" x 8"
Maximum Angles: 4" x 4" x 1/2" or 4-1/2" x 4-1/2" x 3/8"
Maximum Bar: 1-9/16" Round & Square
Maximum Punch: 1-1/8" x 1/2" or 3/4" x 3/4"
Maximum Notch: 1-5/8" x 3-1/2" x 3/8" Thick
Throat Depth 20"
Stroke Speed 43
Motor 6½ H.P. 230/460 Volt, 3 Phase
Equipped With:
20" Deep Punch End Throat
Work Table on Punch and Coper Ends w/ Adjustable Back Stops
Electric Length Gauge
Electric Foot Pedals
20 plus punches & dies
Worklight |
|
Ad # 12823 | Ironworkers |
70's |
Carlstadt |
N-58 |
Good |
sold |
Photo /
More Info. |
Bar/picket Twister machine 1/2" sq: Carlstadt bar twisting machine
1/2" sq solid rod w/ optional 5/8" acc
3/4HP
base 12" x 18"
some bushings included
Men E Uses no 2
Picket Twister-twists square bars quickly and easily for railings, grills ect.-bars remain straight after twisting
drum switch permits accurate control for bar end alignments
manuals |
|
Ad # 10839 | Ironworkers |
|
Dvorak |
314 |
Good |
sold |
Photo /
More Info. |
30: Little Scotchman Iron Worker Model 314.
This is a single phase machine. Has a full set of
Punches for the unit. Over 20 Punches.
$4000 for Unit and punches.
Have other Machine Shop Tools and Equipment For
Sale.
Iron Worker, Lathe, band saw, drill, wielder,
machine shop equipment
|
|
Ad # 10749 | Ironworkers |
|
Scotchman |
314 |
Good |
SOLD |
Photo /
More Info. |
30 ton: Scotchman 30 ton Ironworker Mod. 314
50 dies valued at 60.00 per die being given away with machine for free: both going together either way.
|
|
Ad # 12765 | Ironworkers |
1992 |
Rogers Manufacturing |
Presshear 10# |
Good |
sold |
Photo /
More Info. |
18 Ton: Rogers Manufacturing -Presshear # 10
Power Ironworker
PRESSHEAR # 10
PUNCH CAPACITY - 18 TONS
ACCESSORIES SOLD SEPARATELY
PIPE NOTCHER - SPEAR POINT
BENDING DIE - COPER
SQUARE TUBING CUTTER
NOTCHER - PUNCH OILING SYSTEM
This machine is both a punch and a shear.
Cast-frame - high tensile ductile iron.
Operates on 1 HP, 1750 RPM motor. Three phase or single phase available.
Foot operated, one stroke safety clutch.
Front is conventional press and can be used for punching or forming
Regular die sets will fit this machine
Adjustable ram.
Hold-down easily adjusted.
Punch can be lowered to material for center punching and will remain until clutch is engaged.
Blades are tool steel - Can be re-sharpened and adjusted.
Punch to back of throat - 3"
Bar hole for lowering punch by hand.
Blade guard, foot lever guard, and gear guard for operators protection
Approximately 48 strokes per minute.
basic specs below-lots of acc availablr for this machine
Punch 3/4 x 1/4
Throat 3"
2" x 2" x 1/4 Angle Iron
3/4" Round
3/4" Square
1/4"x 4" Flats
2 x 1/2 x 1/8" channel
punches 7/8" round hole thru 1/4" mtl
2" stroke
shut height : 6-1/2"
2" Stroke
more details at http://www.rogers-mfg-inc.com/
|
|
Ad # 10748 | Ironworkers |
|
Scotchman |
|
Very Good |
Sold |
Photo /
More Info. |
: Scotchman Ironworker
This is a lightly used Ironworker in excellent shape ready to go to work
|
|
Ad # 10747 | Ironworkers |
|
Scotchman |
|
|
sold |
Photo /
More Info. |
20 ton: Scotchman Ironworker/ shear/ punch/ angle iron shear
20 ton capacity
Older model, but saves money versus drilling &
torching
has punches & small v-block bending die
|
|
Ad # 10746 | Ironworkers |
|
Scotchman |
4014T |
Good |
sold |
Photo /
More Info. |
: Scotchman 4014T ironworker
Ironworker with turrent. 220v, 1phase
|
|
Ad # 11613 | Ironworkers |
1980 |
Scotchman |
5075 |
Good |
sold |
Photo /
More Info. |
50 ton: Scotchman 50 Ton Iron worker
4" angle shear
24" plate shear
Runs Fine.
Comes with some tooling.
|
|
Ad # 2121 | Ironworkers |
1969 |
Strippit |
Super 30 |
Good |
Sold |
Photo /
More Info. |
: 1.25" punch head, micrometer side gage(new 2001),7 foot side gaging |
|
Ad # 11607 | Ironworkers |
2003 |
Scotchman |
8507-14M |
Very Good |
sold |
Photo /
More Info. |
85 Ton Fully intergrated: Fully Intergrated FI 85/140
85 Ton Punch
140 plate shear tonnage
Punch 1-1/16" Hole 1" Thick
Shear 1" x 12" Plate
6" x 6" 1/2" Angle
1 3/8" Round Bar Shear
1-1/4 Square Bar
6" Throat
Notching 3"
no round stock blade in machine
has new blades in other location |
|
Ad # 11608 | Ironworkers |
2001 |
Scotchman |
12012-24M |
Very Good |
sold |
Photo /
More Info. |
120 ton: Scotchman model 12012-24m
120 Ton
5 HP
Punch 1 1/2" Hole in 1"
Shear capacity:1" x 12";3/4" x 16";1/2" x 24"
Angle shear 6" x 6" x 1/2" included
1 1/4" Round Bar max capacity
1" Square Bar capacity
12" Throat on punch
notcher acc
13" x 24" Punch Table included
a few misc punches included
foot pedal
new blades |
|
Ad # 7929 | Ironworkers |
1986 |
Scotchman |
6509-24M |
Very Good |
Sold |
Photo /
More Info. |
65 Ton Scotchman Ironworker: Included Acc: rod shear, 24" brake , 6 x 6 x 3/8" angle shear , lots & lots... |
|
Ad # 10719 | Ironworkers |
2003 |
Piranha |
P-50 |
Excellent |
Sold |
Photo /
More Info. |
50 ton: Piranha P-50,
Piranha Ironworker P50 CAPACITIES & SPECIFICATIONS
Throat Depth 8" Open Height 13-1/2"
Closed Height w/o Die Block 9-1/4" Work Stations From Floor 42"
Hydraulics:
Pump GPM
System R/V PSI
10.5
2600 Stroke Length 4-1/4"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.) Optional
1/4" to 1-1/2"
1/2" to 1" Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request 10 HP 3 Phase
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W) 50 Tons
13/16" thru 3/4"
*5" thru 1/8"
10"X17" Coper-Notcher (Tons)
(Mat.) 56
2-3/4" x 4" x 1/4"
Dimensions
(NET) W-L-H 24"x66"x60" Plate Shear 14-5/8" Long
3/4" x 10"
5/8" x 14"
voltage: 220/1 phase
Bending Attachment 8" Optional Lengths Available Weight (NET) lbs 2600
Strokes Per Minute 60 @ 1/2"
The Piranha Ironworker P50 features Automatic Urethane Hold Downs on the Punch Stripper and Bar, Plate and Angle Shear. This assures precise cuts and longer punch and blade life.
Piranha Ironworker P50 STANDARD FEATURES:
Complete Punching Attachment with split dove tail mounting
14 Punch and Die sets
8" bending Attachment with split dove tail mounting
Automatic Urethane Hold Down on the Punch Stripper and on Angle,
Plate and Bar Shear
Extra Oil
FilterChip Buckets (2 each)
Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
Remote Electric Foot Switch that can be connected at either end of the machine
Electric Limit Switches that can be set for troke control when using foot control
Set of Round Bar Knives [2 way] (customers choice to 1-1/2")
Set of 11.25 Plate Shear Knives [4 way]
Set of 14.625 Plate Shear Knives [4 way] (instead of Round Bar Knives and 11.25 Plate Shear Knives)
Set of Angle Knives [8 way top] [2 way bottom]
Set of Coper Knives [2 way top] [4 way bottom]
Coupling Wrench & 3/8" Allen Wrench
Integral Lifting Lug for instant portability
Low clearence die-Extra flush mount die holder for thin gauge material.
Punch and die storage included. |
|
Ad # 12741 | Ironworkers |
|
Peddinghaus |
Peddiworker 880 |
Good |
sold |
Photo /
More Info. |
88 Ton: Peddinghaus Peddiworker 880
Voltage 220/3 Phase
88 Ton
hydraulic
8" Throat on punch
12" Shear Blade
5" Angle Shear
Notcher
std specs below
Model # Peddiworker 880
Tons : 88
Capacity: 4'' x 4'' x 3/8'' - 5"x 5"x 1/2" angle 88 Capacity: 4'' x 4'' x 3/8'' - 5"x 5"x 1/2" angle 5/8" x 14" bar 1-1/4" thru 3/4" 1-3/16" sq. & 1 ¼'' round
5/8" x 14" bar
1-1/4" thru 3/4"
1-3/16" sq. & 1 ¼'' round bar
Voltage : 230
Approx wt: 2,650 lbs.
Approx. dim. : 49'' x 27'' x 72'' t
Equipped with:
Coping notcher |
|
Ad # 10679 | Ironworkers |
2007 |
Bailegh |
SW-441/SW50 |
Excellent |
Sold |
Photo /
More Info. |
50 ton, single phase : Specifications:
50 Ton
3HP
PUNCH CAPACITY:
1/8" x 5/8"; 1-5/8" Dia x 3/8" thick
throat depth : 6"
max stroke: 1-1/8"
cycles: 19 times/min
FLAT SHEARING:
flat bar capacity : 10" x 3/8"
blade length : 10-1/4"
ANGLE SHEARING:
at 90 deg: 3 x 3 x1/4"
BAR ShEARING:
round: 1-1/8"
square: 1 x 1"
NOTCHING:
rectanglular notcher: 2" x 3" x 9/32"
Special Tooling: Available(not included)
press brake: 6-5/16" x 5/16"
Multi-Vee Press brake: 9-1/8" x 5/32"
Pipe notching: 2-1/2"
Vee notching: 3-1/2" x 3-1/2" x 5/16"
Angle bending: 2-1/2" x 5/15"
•True vertical movement on all stations - less deformation and cleaner cuts - no waste!
•Oversize, 2 piece quick release punching table with adjustable stops and sae / metric scale - Standard!
•Oversize notching table with adjustable stops - Standard!
•Manual back gauge for precise operation at all stations - Standard!
•CE Approved Cover inter-lock system for maximum safety - Standard!
•Surprisingly Quiet, smooth and precise operation due to robust welded framework - zero flex!
•Remote, three position foot switch for accurate control - Standard!
•Adjustable stroke control - Standard!
•Long life, multiple edge blades on shearing and notching stations - Standard!
•7 sets of round punches and dies included - Standard!
•T-slot punching base enables wide range of tooling options and easy adjustment - Standard!
•Two Piece, Self Centering Quick Release Punch Retaining System w/ Spanner Wrench - Standard!
•Easy Adjust, Swing Away Material Stripper - Standard!
•World Class, name brand components for years of hassle free productivity - Standard!
•Jog mode enables accurate tooling alignment in minimal time - Standard!
•Shear table w / scribed angle markings and material guides - Standard!
•Adapters to fit Cleveland Tool punch and die sets - Standard!
•Punch capacity up to 1 ½" round - Standard!
•Angle iron, Flat bar, Round and Square stock Shearing - Standard!
•Rectangular Notching - Standard!
•Hole punch - Standard!
•Multiple tooling options available - Contact Your Baileigh Representative for more information!
Five Station Hydraulic Ironworker
Baileigh's industry leading five station 50 ton Hydraulic Ironworker is the perfect addition to any fabrication shop where punching, shearing and notching is required in plate, bar, and various types of angle iron. This iron worker was designed and is manufactured to the highest standards in the industry, ensuring a lifetime of productivity for your enterprise.
All Baileigh Hydraulic Ironworkers utilize true vertical movement that has eliminated any sort of pivot and mechanism allowing for the smoothest punching station on the market. The extremely heavy duty all welded integrated steel frame and vertical motion allow the operator to punch at full capacity with no jarring or vibration, allowing for reduced tooling costs and longer machine life. The SW-50 has a deep 6" throat and can punch up to 1-9/16" OD x 3/8" thick material of mild steel. Stable, oversized work tables with locking material guides are coupled with a very visible metered scale allowing for fast setup and aid the operator during multiple production runs.
The shearing station has the ability to cleanly cut through metal with absolutely no left over waste (noting many other popular brands of Ironworkers leave a kerf or slug of waste). A solid material clamp can be quickly adjusted via a knurled handle. The operator table is oversized with locking material guides and scribed angle markings, to assist with multiple production runs. The material template allows for round, square, flat and angle iron sheering with optional profiles available. There is a quick position template for producing perfect 30, 45 or 60 degree angles in seconds.
The notching station allows for quick notches of plate, angel or U-channel in seconds. Proper guarding lifts out of the way when in production and drops down safely when not in use. The notching station has an oversized metered work table that helps keep material from lifting. Locking product stops are standard offering quick set up and additional accuracy when working on multiple production runs of the
|
|
Ad # 12664 | Ironworkers |
1981 |
scotchman |
4014-TM |
Good |
sold |
Photo /
More Info. |
40 ton w/ 6 station punch turret: Scotchman Ironworker
Model 4014-TM
40 ton w/ 6 station punch turret
5 HP
220/1 single Phase-home shop ready!!!!
Specifications:
Punch tonnage 40 ton
Punch capacity 1" through 1/2"
Flat bar shearing length 14"
Flag bar shearing capacity 5/8" x 5" to 3/16" x 14"
Angle shear capacity 3" x 3" x 1/4"
Channel 2" max.
Round bar 3/4"
Square bar 3/4"
Hydraulic system pressure 1450
Approximate dimensions 4' x 2' x 5' high
Approximate weight 2,000 lbs.
Included acc: brake & angle shear ,plus lots of punches & flat bar shear adj. stop rod |
|
Ad # 12660 | Ironworkers |
|
Uni-Hydro |
4406 Angle Shear |
Excellent |
sold |
Photo /
More Info. |
3" x 3" x 3/8": Uni-Hydro 3" x 3" x 3/8' Slug Type Angle Shear.
Fits Uni-Hydro 40-56 ton units. Very little useage in excellent condition. |
|
Ad # 10647 | Ironworkers |
|
Ironcraft |
41/41 |
Good |
SOLD |
Photo /
More Info. |
3" x 3" x 5/16",Ironcrafter,40 Ton,Hyd,Punch,Flats,Sq&Rds,Infd&StockSt: One Each Used - Ironcrafter 40 Ton Hydraulic
Ironworker, Model 41/41, Serial Number 79E193
Specifications:
Punching: 40 Tons, 1" Dia x 1/2" Thick Max (Relational)
Maximum Dia 1-1/4"
Stroke: 2"
Shearing Angles: 3" x 3" x 5/16" at 90 Degrees
2" x 5/16" at 45 Degrees
Round Bar: 1-1/4" and Square Bar at 1"
Flats: 6" x 5/8"
Electrics: Presently on 220/3/60 Htz
Equipped With:
Many Sets Of Assorted Punches & Dies, P40 P & P82 D
Lifting Eyebolt
144" Adjustable Stock Stop
118" Infeed Table With Gravity Roller Holdowns
Condition: Good Operating and Quiet
|
|
Ad # 9687 | Ironworkers |
|
pedinghaus |
210 AD/20 |
Good |
sold |
Photo /
More Info. |
210 ton mechanical : 210 ton mech. type
6x6x1/2 capacity
V-notcher-4x4x1/2
flat bar shear-13-3/8x1/2
2-5/16 max hole punch
19" throat on punch
punch cap.-1-3/16thx7/8 thick or 1x1 hole
tooling-lots of punches & dies |
|
Ad # 9677 | Ironworkers |
2006 |
Kingsland |
M80 |
Excellent |
Sold |
Photo /
More Info. |
80 ton: Machine is in excellent condition. Includes die set from 5/16" to 1 1/2" in... |
|
Ad # 11538 | Ironworkers |
2005 |
edwards |
65 ton edwards ironwoker |
Excellent |
sold |
Photo /
More Info. |
65 ton edwards: 65 ton PUNCH US--- Metric
Tooling included: 6 x 6 angle shear
Max. Capacity 1-1/16" dia. in 3/4" plate 2.85cm x 1.90cm
Work Height 36" 91.44cm
FLAT BAR SHEAR
Max. Width 3/8" x 24" 0.95cm x 60.96cm
Max. Thick 1/2" x 14" or 1" x 4" 1.27cm x 35.56cm x 2.54cm x 10.16cm
Max. Round 1" 2.54cm
Max. Square 1" 2.54cm
Work Height 33-1/2" 85.09cm
ANGLE SHEAR
Max. Size 5" x 5" x 1/4" or 4" x 4" x 3/8" 12.7cm x 12.7cm x 0.63cm or 10.16cm x 10.16cm x 0.95cm
Work Height 42" 106.68cm
COPER / NOTCHER
Max. Capacity 2-1/2" x 6" x 3/8" 6.35cm x 15.24cm x 0.95cm
Work Height 35-1/2" 90.17cm
OPEN CAVITY
Specifications 11-1/2" wide x 9-3/4" tall 29.21cm x 24.765cm
Work Height 42" 106.68cm
GENERAL SPECS
Rated Capacity 65 ton
Throat Depth 9-3/4" 24.76cm
Open Height 8-1/8" 20.63cm
Shut Height 6-3/4" 17.14cm
Stroke 1-3/8" 3.49cm
Cycle Time 2 seconds
Electric Motor Standard 5 HP, 3 Phase, 208/240 v, 1725 rpm, 14 amp
Hydraulic Pump Size 10-1/2 gpm - 2 stage 39.74L per min - 2 stage
Valve Pressure 2800 psi 193.05bar
Reservoir 17 gallons 64.35L
Cylinder 3-1/2" ram 8.89cm
Dimensions: Base x Height 43" x 42" x 55" 109.22cm x 106.68cm x 139.7cm
Shipping Weight 4220 pounds 1914.15kg
Picture shown not actual machine but identical
Have angle Iron shear acc: 6 x 6 x 1/4" , no punches
very low hrs..
bought 2005 used maybe 10xs come get this tied of moving it around used on race car fab. |
|
Ad # 7871 | Ironworkers |
1994 |
Piranha |
P-50 |
Good |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P-50: (1) Piranha 50 ton Hydraulic Ironworker
Throat depth - 8"
Open height - 13-1/2"
Closed height w/o die block - 9-1/4"
Stroke length - 4-1/4"
Punch capacity - 50 tons
... material thickness - 13/16" through 3/4"
... strokes per minute - 60 @ 1/2"
... platen table size - 10" x 17"
Bar shear capacity, round - 1/4" to 1-1/2"
Bar shear capacity, square - 1/2" to 1"
Coper-notcher (56 tons) - 2-3/4" x 4" x 1/4"
Plate shear (14-5/8") - 3/4" x 10" , 5/8" x 14"
Angle shear, maximum - 5" x 5" x 3/8"
Brake: 8" long
Hydraulic pump (10.5 GPM) - 2600 PSI, 18 gallons
Motor - 10 HP, 1800 RPM--
Includes Punch Dies & Press Brake Die (4-Way die ranging from approx 1" wide to 2-1/2" wide) |
|
Ad # 3214 | Ironworkers |
80's? |
Peddinghaus |
210/11 |
Good |
sold |
No Photo /
More Info. |
40 Ton Machanical Ironworker: 40 Ton
20" throat on punch
Dual operator Station
Includes several punches & Dies |
|
Ad # 12567 | Ironworkers |
|
Piranha |
P70 |
Good |
sold |
Photo /
More Info. |
70 ton: The Piranha Model P-70 extends your work week.
putting more power, more precision on the job, day
after day. The P-70 features Automatic Urethane
Punch Strippers and Bar, Plate and Angle Shear
Hold Downs to assure precise cuts and longer punch
and blade life.
Complete Punching Attachment with split dove
tail mounting
10 Punch and Die sets
12" bending Attachment with split dove tail
mounting
Automatic Urethane Hold Down on the Punch
Stripper and on Angle
Plate and Bar Shear
Front and rear 5 position joy stick controls
(electric) with jog up & down, fast up & down,
neutral
Remote Electric Foot Switch that can be
connected at either end of the machine
Electric Limit Switches that can be set for
stroke control when using foot control
Set of Round Bar Knives [2 way] (customers
choice to 2)
Set of 14.50 Plate Shear Knives [4 way]
Extra Blank Knife to extend shear to 18"
Set of Angle Knives [8 way top] [4 way
bottom]
Set of Coper Knives [2 way top] [4 way
bottom]
Chip Buckets (2 each)
Extra Oil Filter
Coupling Wrench & 3/8" Allen Wrench
Integral Lifting Lug for instant portability
|
|
Ad # 7809 | Ironworkers |
2005 |
Piranha |
P-50 |
Excellent |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P-50: Used P-50 PIRANHA 5"x 5"x 3/8" - 50 Ton Hydraulic Ironworker
General Specifications:
Tonnage Capacity At Punch End: 50
Throat Depth: 8"
Closed Height w/o Die Block: 9-1/4"
Bar Shear; Round Min. to Max. 1/4" to 1-1/2"
Square Min. to Max. 1/2" to 1"
Punch End; Max. Material 13/16" thru 3/4"
Max. Hole (special tool) 5" thru 1/8"
Platen Table Size: 10" D x 17" W
Bending Attachment: 8"
Strokes Per Minute: 60 at 1/2"
Open Height: 4-1/4"
Standard Motor: 10 HP AC
Coper-Notcher; (Mat) 2-3/4" x 4"x 1/4"
Plate Shear; 15" Long
3/4"x 10"
5/8"x 15"
Angle Shear; 5"x 5"x 3/8" w/Special Tool: 4"x 4"x 1/2"
Equipped With:
Automatic Urethane Hold Down on Punch Stripper & On Angle Plate & Bar Shear
Front 5 Position Joy Stick
Electric Limit Switches To Set Stroke Control When Using Foot Pedal
Foot Pedal Controls
Standard Knives
Coper-Notcher Station
Assorted Punch & Dies
Optional Quick Set Punch Gauging Table
Optional Mechanical Back Gauge
Optional 8" (Press Brake Type) Bending Attachment
Pipe Notching Attachment
Integral Lifting Lug
Replacement Cost NEW Today Including Cost Of Options Approximately $15,400. At Quoted Price, We Will Off Limited 6 Month Guarantee From Factory Rep. |
|
Ad # 7810 | Ironworkers |
1978 |
Piranha |
P3 |
Good |
SOLD |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P3: (1) Piranha 50 ton Hydraulic Ironworker
Throat depth - 8"
Open height - 13-1/2"
Closed height w/o die block - 9-1/4"
Stroke length - 4-1/4"
Punch capacity - 50 tons
... material thickness - 13/16" through 3/4"
... strokes per minute - 60 @ 1/2"
... platen table size - 10" x 17"
Bar shear capacity, round - 1/4" to 1-1/2"
Bar shear capacity, square - 1/2" to 1"
Coper-notcher (56 tons) - 2-3/4" x 4" x 1/4"
Plate shear (14-5/8") - 3/4" x 10" , 5/8" x 14"
Angle shear, maximum - 5" x 5" x 3/8"
Hydraulic pump (10.5 GPM) - 2600 PSI, 18 gallons
Motor - 10 HP, 1800 RPM--
|
|
Ad # 7813 | Ironworkers |
|
Piranha |
P-50 |
Good |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P-50: Used Piranha 50 Ton Ironworker
Angle Shear Capacity: 5”(L1), 5”(L2), (T) .375”
Tonnage: 50
1 Press brake die and misc. punches & dies.
Dual controls |
|
Ad # 7812 | Ironworkers |
|
Piranha |
P-50 |
Good |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P-50:
SPECIFICATIONS:
• Throat Depth 8"
• Open Height 13½"
• Closed Height w/o Die Block 9¼"
• Stroke Length 4¼"
Punch:
• Capacity 50 Tons
• Max. Material 13/16" thru ¾"
• Max. Hole (Special Tool) 5" thru 1/8"
• Strokes per Minute 60 @ ½"
• Platen Table Size (D-W) 10" x 17"
Bar Shear:
• Round (Min. to Max.) ¼" to 1½"
• Square (Min. to Max.) ½" to 1"
Coper-Notcher:
• Tons 56
• Material 2¾" x 4" x ¼"
Other:
• Plate Shear 14-5/8" Long • 3/4" x 10" • 5/8" x 14"
• Angle Shear (Max.) 5" x 5" x 3/8"
• Bending Attachment 8"
Hydraulics:
• Pump GPM 10.5
• System R/V PSI 2600
• Fluid Capacity 20 Gallons
Misc.:
• 10 HP
• 3 Phase
• Integral Lifting Lug Provides Instant Portability
• Work Station Height 42" from Floor (Approx.) |
|
Ad # 7811 | Ironworkers |
1986 |
Piranha |
P3 |
Good |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P3: Piranha Model P-3 50 Ton Hydraulic Ironworker
Angle Shear Cap (L1): 5 "
Angle Shear Cap (L2): 5 "
Angle Shear Cap (T): .375 "
Tonnage: 50 Ton
Coper/Notcher: 2-3/4" x 4" x 1/4"
Power: 10 HP
Throat: 8 " |
|
Ad # 7798 | Ironworkers |
1995 |
Edwards |
50 Ton Jaws IV |
Good |
SOLD |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Edwards Model Jaws IV: Specifications:
Punch Capacity - 1" hole in 5/8" Plate
Shear Capacity - 10" x 1/2"
Round Capacity - 1"
Square Capacity - 1"
Angle - 3" x 3" x 3/8"
Coper - 2" x 3" x 5/16"
3 HP Main Motor |
|
Ad # 15306 | Ironworkers |
2012 |
Peddinghaus |
PeddiMax No.1 |
Excellent |
sold |
Photo /
More Info. |
140 ton: 140 ton Peddinghaus Hydraulic Ironworker
Model: PeddiMax No.1
Year: 2012
Condition: like new
Machine Specifications:
Punch tonnage - 140
Punch stroke, infinitely adjustable - 3/8" to 2"
Punch strokes per minute (3/4mm) - 29
Punch throat depth - 20"
Punch capacity with flat die bolster - 1-1/2" through 1"
Punch capacity with universal die block - 1-1/4" through 1"
Flat bar shear - 20" x 3/4"
Flat bar shear working height - 28.4"
Angle shear capacity - 6" x 6" x 1/2"
Round bar shear - 2"
Square bar shear - 2"
Channels, 90° (with special blades) - up to 8"
I-beams, 90° (with special blades) - up to 8"
Notcher (width x depth) - 2-9/16" x 3-3/8"
Notcher capacity - 1/2"
Oil capacity - 27 gallons
Motor - 15 HP
Approximate dimensions - 80" x 40" x 75" high
Approximate weight - 6,100 lbs
Includes:
• flat shear blades, 201/2 inch long, also for shearing angle iron 45°
• material support table with gauge stops on the flat shear station
• section shear knife for 90° shearing angle iron as well as rounds and squares
• quick-change punching attachment up to 1 1/2 inch Ø, with flat die
bolster, for punches and dies of the blue series or with universal die
block for die no. 3
• height-adjustable swing-way stripper with exchangeable plate
• square notching attachment
• material support table on the notcher station
• two two-stage foot pedals and electrical control elements on the
punch station and the notcher station
• hydraulic low pressure spotter for foot operation
• connecting sockets for external engagement, e.g. via electrical
contact length stop
• integrated hydraulic power pack
• three-phase A.C. motor, 230 / 460 Volt, 60
Includes 2 set of new blades
|
|
Ad # 7797 | Ironworkers |
|
Peddinghaus |
210A/16 |
Good |
Sold |
Photo /
More Info. |
70 Ton Mechanical Ironworker Peddinghaus Model 210A/16: Specifications:
Capacity 70 Tons
Punch Capacity1-1/16” in ¾” or 7/8” in 7/8”
Angle Capacity5” x 5” x ½” @ 90 deg
Flat4-3/8” x 1” or 11” x 3/8”
Notcher 9/16”
Speed45 SPM |
|
Ad # 7796 | Ironworkers |
1980 |
Scotchman |
6509 |
Good |
Sold |
Photo /
More Info. |
65 Ton Hydraulic Ironworker Scotchman Model 6509: Specifications:
65 Ton Punch Station (1-16" Dia x 3/4" Thick) reference
9" Throat
Shear Capacity:1" X 6",3/4" X 10",3/8" X 16",1/4" X 24"
Electrics: 5HP Hyd Motor
Equipped With:
24" Flat Bar Shear With 4-Way Reversible Blade
Optional Accessories:
Angle Shear Capacity At 90 Degree: 6" x 6" x 3/8"
Rod Shear: Round 1/4" to 1-1/4", 9 Cavities
Square 1/4" to 1", 1 Cavity
24" Brake Attachment, 2" Opening
Dies & Punches |
|
Ad # 9564 | Ironworkers |
|
Scotchman |
314-C |
Good |
Sold |
Photo /
More Info. |
40 Ton Ironworker=-single phase: 40 Ton Scotchman Ironworker
Model 314-C 3 hp.
1 phase, 220 V.
Angle shear 3"x3"x0.25",
Flat shear 13.75"x0.25",
Hole punch 6" wide,
hole 1"x0.5". |
|
Ad # 6466 | Ironworkers |
|
HILL ACME |
3 |
Very Good |
SOLD |
Photo /
More Info. |
4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER: 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER:
PUNCHING CAPACITY ................... 33 TONS
MAXIMUM DIAMETER THROUGH THICKNESS .. 1-1/16´´ X 3/8´´
DIAMETER THROUGH MAXIMUM THICKNESS .. 7/8´´ X 1/2´´
DEPTH OF THROAT ..................... 12-1/2´´
LENGTH OF STROKE .................... 1´´
SHEARING CAPACITIES:
ANGLES .............................. 4´´ X 4´´ X 1/4´´
ANGLE AT 45 DEGREE .................. 2-1/4´´ X 2-1/4´´ X 1/4´´
FLATS ............................... 6´´ X 1/2´´
LENGTH OF PLATE SHEAR BLADES ........ 9´´
ROUNDS .............................. 1-1/4´´
SQUARES ............................. 1-1/8´´
COPER ON SHEAR END
5 HORSEPOWER MAIN MOTOR |
|
Ad # 6467 | Ironworkers |
|
HILL ACME |
#3 HYDRAULIC |
Very Good |
SOLD |
Photo /
More Info. |
4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER: 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER:
PUNCHING CAPACITY .................... 33 TONS
MAXIMUM DIAMETER THROUGH THICKNESS ... 1-1/16´´ X 3/8´´
DIAMETER THROUGH MAXIMUM THICKNESS ... 7/8´´ X 1/2´´
DEPTH OF THROAT ...................... 12-1/2´´
LENGTH OF STROKE ..................... 1´´
SHEARING CAPACITIES:
ANGLES ............................... 4´´ X 4´´ X 1/4´´
ANGLE AT 45 DEGREE ................... 2-1/4´´ X 2-1/4´´ X 1/4´´
FLATS ................................ 6´´ X 1/2´´
LENGTH OF PLATE SHEAR BLADES ......... 9´´
ROUNDS ............................... 1-1/4´´
SQUARES .............................. 1-1/8´´ |
|
Ad # 11448 | Ironworkers |
1980 |
Hill ACME |
#6 |
Excellent |
sold |
Photo /
More Info. |
95 Ton 15hp: Hill ACME 95 Ton
Dual Foot Switch
24" Throat Depth
Punching Capacity
1-1/4" Thru 7/8" ; 1-3/16" Thru 1"
1-1/2" Stroke 65 SPM
Plate Shear
6" x 1-1/8" 10" x 3/4" 14" x 1/2"
Bar Shear
2-3/16" Round 2" Square
Angle Stock
6" x 6" x 1/2" 4" x 4" x 1/2" Tees
Notcher
Rectangular........3-1/4" x 3-1/4" x 1/2"
90 Degree V.......1/2" x 2-1/4" Deep
|
|
Ad # 12492 | Ironworkers |
|
Piranha |
P120 |
Good |
SOLD |
Photo /
More Info. |
120 Ton: Piranha P120 Iron Worker
CAPACITIES & SPECIFICATIONS: MODEL P-120 120 TON
Throat Depth 12" Open Height 15-1/2"
Closed Height w/o Die Block 10-1/4" Work Stations From Floor 44"
Hydraulics:
Pump GPM
System R/V PSI
15
3500 Stroke Length 5-1/4"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
1/2" to 2"
1/2 " to 1-3/8" Motor STD. 230/460 1800 rpm
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W) 120 Tons
1-1/2" thru 1"
*5" thru 1/4"
14-1/2" x 21" Coper-Notcher (Tons)
(Mat.) 95
4" x 6" x 3/8"
Dimensions
(NET) W-L-H
35 " x 90" x 68-1/2" Plate Shear 20-1/2" Long
1" x 12"
3/4" x 18"
1/2" x 20"
Bending Attachment 12" Optional Lengths Available Weight (NET) lbs 6200
Strokes Per Minute 40 @ 3/4" Angle Shear (Max.) 6" x 6" x 5/8"
|
|
Ad # 10529 | Ironworkers |
1992 |
Scotchman |
4014CM |
Very Good |
sold |
Photo /
More Info. |
40 Tons: Scotchman 4014-CM
40 Ton punch station with 6" throat
14" bar shear blades
12" brake acc.
3" angle shear (please see pictures)
Hardly Used
1Phase 230 volt meter
Have aprox. 22 punchs and dies (please see pictures)
Adjustable Stroke Control
Machine is mounted on very nice welded frame with 4 solid steel casters, also.
Has aprox. 30' of electrical cord attached. |
|
Ad # 10486 | Ironworkers |
unknown |
Scotchman |
4014CM |
Good |
SOLD |
Photo /
More Info. |
40 ton: 40 Ton Punch Station (1" in 1/2")
Keyed Punch Ram for Safety
6" Throat Depth
2" Die Holder
Punch Nut with Wrench and Stripper
One Round Punch & Die: Max. Dia. 1"
Adjustable Stroke Control
Angle Shear Capacity:
3" x 3" x 5/16" at 90° and 2" x 2" x 1/4" at 45°
14" Flat Bar Shear with 4-Way Reversible Blade (1/2" x 6", 3/16" x 14")
Tool Table Work Area
Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
230/3 voltage)
All Guards Necessary to Comply with ANSI B 11-5 Standards
Fork Lift Accommodations
One-year warranty
Made in USA
|
|
Ad # 14693 | Ironworkers |
2003 |
Scotchman |
5014 TM |
Good |
sold |
Photo /
More Info. |
50 Ton: 2003 50 Ton Scotchman comes with about 20 dies.
Clean machine and is maintained and operated on a daily basis.
Standard Specs - please verify:
Scotchman
Model 5014 TM
Wired 460
50 Ton Punch Station with 3-Station
Revolving
Turret (1-1/4" in 1/2" and 13/16" in 3/4")
Keyed Punch Ram for Safety
4" Throat Depth
Three 2" Die Holders, Three Punch Nuts with
Wrench and Three Strippers
Adjustable Stroke Control
Angle Shear 4" x 4" x 3/8" at 90° and 2" x
2"
x 3/8" at 45°
14" Flat Bar Shear with 4-Way Reversible
Blade
(3/4" x 4", 1/2" x 8", 3/8" x 10", 1/4" x 14")
Rectangular Notcher, 2-1/2" x 3" x 5/16" ,
2-
1/2" x 2-3/4" x 3/8"
Tool Table Work Area
Punching Capacity 50 ton
1-1/4" in 1/2"
13/16" in 3/4"
Special Tooling 2-1/4" Max. Dia.
Throat Depth 4" 100 mm
Flat Bar Shear 14" Length
3/4" x 4"
1/2" x 8"
3/8" x 10"
1/4" x 14"
Angle Shear 90° 4" x 4" x 3/8"
Strokes Per Minute in Light Material [Punch
Station] 1/4" stroke
Strokes Per Minute in Heavy Material [Punch
Station] 3/4" stroke
Hydraulics 2100 psi
All Guards Necessary to Comply with ANSI B
11-
5 Standards
Forklift Accommodations
Made in USA
Optional Tooling not included with this
machine! But available New if required.
90° V. Notcher 6" x 6" x 1/8"
3" x 3" x 1/4"
Rod Shear
Round Rod (Max.)
Square Rod (Max.) 1/4" to 1"
5 Cavity
7/16", 9/16"
5/8", 3/4", 1"
1/4" to 3/4" 1 Cavity 3/4"
Square Tube Shear 1/2" to 1" 12 ga.
Picket Tool 1/2" 3/4" 1" 16 gauge |
|
Ad # 9495 | Ironworkers |
1999 |
EDWARDS |
|
Good |
sold |
No Photo /
More Info. |
75 TON EDWARDS: |
|
Ad # 11370 | Ironworkers |
2000s |
Uni hydro |
P50-14 |
Excellent |
sold |
Photo /
More Info. |
50 Ton Uni Hydro: 50 Ton
Uni-Hydro
Wired 220 Single Phase
Maximum Flat Angle
4" x 4" X 1/2"
Maximum Flat Bar
1/2" x 10" 5/8" x 8" 3/4" x 6"
Maximum Hole Punch
1" Diameter in 1/2"
|
|
Ad # 14155 | Ironworkers |
2002 |
Mubea |
HIW 750/510 |
Good |
sold |
Photo /
More Info. |
82 Ton: Mubea Ironworker
Capacity: 82 Ton
Model: HIW 750/510
Electrical: 230/460/3 phase
Punching:
Max. Tonnage.......82 Ton
Punch Capacity.....1-1/4” Hole Thru 3/4” Plate
Max Stroke Length .3-1/8"
Throat.............20"
Bar Shear:
Flat Max. Thickness...12" x 3/4”
Flat Max. Width.......18” x 5/8”
Angle Shear:
Max. Size.............6" x 6" x 1/2"
Coper Notcher:
Max Size..............2-1/16" x 3-1/2" x 7/16"
Round/Square:
Max. Size ............2"
Motor Size............10 HP
(5) Separate Work Stations:
Punching......Standard
Angle.........Standard
Flat Bar......Standard
Notching......Standard
Rod/Square....Standard
|
|
Ad # 14654 | Ironworkers |
|
Scotchman |
6509 |
Good |
sold |
Photo /
More Info. |
65 Ton: 65 TON SCOTCHMAN HYDRAULIC IRONWORKER
Model 6509
Punch Tonnage: 65 Tons
Hole Capacity: 1-1/16" in 3/4" Mild Steel
Throat Depth: 9"
SPM Approx.: 40
Angle Shear:
(90°): 6" x 6" x 3/8" Mild Steel
(45°): 4" x 4" x 1/2" Mild Steel
Flat Bar Shear:
24" x 1/4" Mild Steel
12" x 1/2" Mild Steel
8" x 3/4" Mild Steel
Length of Knives: 24"
EQUIPPED WITH:
Remote Foot Switch
Angle Shear
Miscellaneous Punches & Dies |
|
Ad # 15250 | Ironworkers |
1953 |
Buffalo |
1/2 |
Good |
sold |
Photo /
More Info. |
58 ton: Buffalo #1/2 mechanical Ironworker
std mfg specs below Specifications
Punch ram pressure:58 tons
Punch throat:20"
Working height:38-7/16"
Punch number:664
Die number:14020
OD of die x height:2" x 1-1/8"
Die gauge line:7/8"
Flywheel RPM:307
Strokes per minute:44
Length of punch stroke:1-1/16"
Capacity of punch:1" x 5/8"; 13/16" x 3/4"
Angle shear capacity at 90 degrees:4" x 4" x 1/2"
Angle shear capacity at 45 degrees:3" x 3" x 5/16"
Length of angle shear stroke:1-1/2"
Rounds:1-5/8"
Squares:1-1/2"
Notcher:3" x 3" x 5/16"
Coper:2" x 3" x 3/8"
Motor:3 HP
Volts:208-220/440
Phase:3 Cycles 60
Amps:8.7-8.7/4.35
Approximate dimensions
73" x 50 x 82" high
Approximate weight:4,300 lbs
It can punch 13/16 in 3/4 plate,larger in thinner steel.It can shear 3x6x3/8 angle,5/8x6 flatbar and shear up to 1/2 plate of unlimited width using the bypass feature.
It can also punch to the center of a 2x2"angle iron leg.It will shear 1-5/8" round bar and depending on the tooling package do a whole lot more. |
|
Ad # 15245 | Ironworkers |
1998 |
Piranha |
P-3 |
Good |
sold |
Photo /
More Info. |
47 ton: Piranha #P-3 Ironworker
47 ton
lots of tooling shown
press brake acc 8"
manuals
Piranha P-3 Hyd. Ironworker, 47-Ton,
7.5, HP,
1" Punch, 1.5
Round Bar 5/8 x 12" Plate,
5 x 5 x 3/8 Angle,
2 3/4 x 4" Coper-Notcher |
|
Ad # 11335 | Ironworkers |
2004 ? |
Peddinghaus |
110/140 |
Good |
sold |
Photo /
More Info. |
140 Ton: Peddinghaus Ironworker:
Standard Features
Dual Operator Iron Worker with 5 Workstations
Quick change, high-performance punch unit
Plate and Flat Bar Shear with Ledge Table
Gauge Stop and in feed guide
Section Shear for shearing angle iron, rounds and squares
Square or triangular notcher
110 Ton Punch Station
Throat Depth 20"
The Peddinghaus ironworker, Peddimax model 110/140, is a two (2) slide Ironworker, complete with five (5) work stations. Ironworker Ironworker The 110 ton punch slide on this Ironworker is equipped as standard with a universal die block for standard structural steel punching applications for ironworkers. A flat die bolster and die block can be provided as an option. All forces generated in the ironworker through punching, shearing and notching, are equally distributed throughout the slide and body plate frame design, not through the hydraulic cylinder. This design eliminates shock and stress on the ironworker hydraulic system
Angle (L1):6" / 152.4 mm
Angle (L2):6" / 152.4 mm
Angle (T):0.500 " / 12.7 mm
Tonnage:110T / 99.8 t
Power:10hp / 10.0
Stroke:2" / 50.8 mm |
|
Ad # 14091 | Ironworkers |
1992 |
Piranha |
P-50 |
Good |
sold |
Photo /
More Info. |
50 Ton: Piranha P50 Ironworker
Features such as urethane stripping, automatic
shear hold-downs, quick change tooling, low blade
rake angles, and six standard work stations,
coupled with its ergonomic design and clear lines
of sight to all tools, including shear blades,
place Piranha ironworkers far above the
competition. These features produce higher quality
fabricated parts, and make Piranha hydraulic
ironworkers easier to use than any other
ironworker.
PIRANHA SINGLE OPERATOR IRONWORKERS are the most
versatile line of hydraulic ironworkers in the
market today. Built in America for over 25 years,
Piranha Single Operator Ironworkers provide six
(6) standard workstations:
1. Punching
2. Bending
3. Round or Square Bar Shearing
4. Flat Bar Shearing
5. Angle Iron Shearing (no slug loss)
6. Coping/Notching
throat: 8"
open height: 13.5"
stroke: 4.250"
punch: 50 ton-13/16 thru 3/4"..max hole size: 5"
thru 1/8" mtlw special tooling
punch table: 10 x 17"
angle shear: 5" x 5" x 3/8" or 4" x 4" x 1/2"
bar shear: round-1/4" to 1-1/2" square: 1/2" to 1"
coper/notcher: 2-3/8" x 4" x 1/4"
press brake acc included 8" 4 way
strokes 60 per min
motor: 10 hp
foot pedal or joystick control
several punches & dies included approx a dozen
note: main pix mfg stock photo
|
|
Ad # 12260 | Ironworkers |
93 |
Scotchman |
4014C |
Good |
sold |
Photo /
More Info. |
40 Ton 220 Single Phase: Scotchman 4014C
Voltage 220/ Single Phase
Specifications:• Capacity (tonnage) 40
• Throat 6"
• Shears:
Angle 3" x 3" x 1/4"
Miter (45°) 2" x 2" x 1/4"
• Punching capacities:
3/4 Mild steel 5/8"
1/2" Mild steel 1"
3/8" Mild steel 1-1/4"
• Flat bar shear:
1/2" Mild steel 8"
3/8" Mild Steel 10"
1/4" Mild Steel 12"
3/16" Mild steel 14"
• Hydraulic pressure (PSI) 1,400
• Dimensions:
Left to right 57"
Front to back 52"
Height 58"
• Weight 2,050 Lbs
|
|
Ad # 12259 | Ironworkers |
94 |
Scotchman |
6509 |
Good |
sold |
Photo /
More Info. |
65 Ton: Rated on: 65,000 PSI Tensile A 36 Mild Steel
Punching Capacity 65 ton
1-1/16" in 3/4" 58 mt
27 mm in 18 mm
Special Tooling 4" Max. Dia. 100 mm Max. Dia.
Flat Bar Shear 24" Length
1" x 6"
3/4" x 10"
1/2" x 12"
3/8" x 16"
1/4" x 24" 600 mm
25 mm x 150 mm
18 mm x 250 mm
12 mm x 300 mm
10 mm x 400 mm
6 mm x 600 mm
Opt. Saber Blade 1" x 6"
1/2" x 16" 25 mm x 150 mm
12 mm x 400 mm
Angle Shear 90° 6" x 6" x 3/8"
5" x 5" x 1/2" 150 mm x 150 mm x 10 mm
125 mm x 125 mm x 12 mm
Angle Shear 45°
(with Bar Shear) 3" x 3" x 3/8"
4" x 4" x 1/2" 75 mm x 75 mm x 10 mm
100 mm x 100 mm x 12 mm
Brake 12" 40 ton 36 mt
Brake 24" 30 ton 27 mt
Open End Brake Max. 1/4" x 5"
Flat or Angle Iron 6 mm x 125 mm
Pipe Notcher
Schedule 40 I.D. 3/4"
1"
1-1/4"
1-1/2"
2" 19 mm
25 mm
32 mm
38 mm
50 mm
Rectangle Notcher 2" x 2-1/2" x 3/8" 50 mm x 65 mm x 10 mm
90° V. Notcher 6" x 6" x 5/16" 150 mm x 150 mm x 8 mm
Channel Shear 2" to 5" Adj. 50 mm to 125 mm Adj.
Strut Shear Samples Required
Rod Shear
Round Rod (Max.)
Square Rod (Max.) 1/4" to 1-1/4", 9 Cav.
1/4" to 1", 1 Cav. 6 mm to 32 mm
6 mm to 25 mm
Square Tube Shear 1/2" to 2",
12 ga. 12 mm to 50 mm
2.75 mm
Picket Tool 1/2"
3/4"
1"
16 gauge 12 mm
19 mm
25 mm
1.6 mm
Offset Die Holder Max. 40 ton 36 mt
Strokes Per Minute in Light Material 1/4" Stroke [Punch Station] 40 spm
Strokes Per Minute in Heavy Material 3/4" Stroke [Punch Station] 17 spm
Hydraulics 2,600 psi 183 bar
Dimensions W-24"
L-60"
H-66" W-57 cm
L-152 cm
H-168 cm
Weight 2,750 lbs. 1,250 kg
|
|
Ad # 12264 | Ironworkers |
1976 |
Mubea |
KBL 100-50 |
Good |
sold |
Photo /
More Info. |
100 Ton-mechanical trype: Mubea-KBL 100-50
100 Ton
Shear 10" x 3/4" Max
Round Shear 2" 3/16
Hole Punch 2" 3/8 x 1" 3/8
T Slot 4" x 1/2"
Note:see tag pic for more details.. |
|
Ad # 11272 | Ironworkers |
1977 |
Peddinghaus |
210 Super 13 |
Good |
sold |
Photo /
More Info. |
66 Short Tons Mechanical Ironworker: Peddinghaus Model # 210 Super 13
66 Short Tons, with some Tooling |
|
Ad # 10320 | Ironworkers |
|
Pettinghouse |
210 super 13 |
Good |
sold |
Photo /
More Info. |
30 ton: 60 MP capacity -30 ton
will punch 7/8" hole in 1" mtl
angle shear 4 x 4
bar shear
8" flat bar shear in 1" mtl
coper/notcher
dual foot pedals
includes: punches: 1/8" up to 1" with some shapes..slots, squares. approx 50 punches
|
|
Ad # 14011 | Ironworkers |
1997 |
Metal Muncher |
MM-70: Fabri Center |
Good |
sold |
Photo /
More Info. |
70 Ton Fabrication center: Metal Muncher 70 ton hyd. Fabrication center Ironworker
press brake tooling included-shown
Punch capacity: 1" thru 7/8" steel
flat bar shear 24" max: 1/4" x 24",3/8" x 20", 3/4" x 12", 1" x 7"
Square punch (optional): 1-1/4"
Round Punch(optional): 1-3/8"
Angle Iron shear:4" x 4" x 3/8"
Coper Notcher: 3" x 3" x 3/8"
used liked a press brake & ironworker combined press brake tooling |
|
Ad # 5984 | Ironworkers |
1985 |
Scotchman |
314-C |
Good |
Sold |
Photo /
More Info. |
40 Ton Scotchman 314-C Ironworker: Model: 314-C
Flat Bar Capacity:
Punch Capacity:
Angle Shear Capacity: 3" x 3" x 0.25"
Tonnage: 40
Specification Description
TONNAGE 40 TON
BAR SHEAR 14"
ANGLE SHEAR 3"
WEIGHT 1300 LBS
Model 314C -std specs-verify..
Throat depth 6"
Punching: 1" diameter x 1/2" thick, 11/4" diameter x 3/8" thick
Cropping: angle 3" x 3" x 5/16" @ 90 degrees, 2" x 2" x 5/16" @ 45 degrees
Shearing: 10" x 1/4", 6" x 1/2", 5" x 5/8"
Dimensions: 4' Length x 2'4" Width x 4'4" Height
Power: 3 HP
|
|
Ad # 12185 | Ironworkers |
1998 |
Edwards |
JAWS IV |
Excellent |
sold |
Photo /
More Info. |
75 TON: Machine is in excellent shape, evrything works well. Not quite sure of the ... |
|
Ad # 12177 | Ironworkers |
2004 ? |
Peddinghaus |
110/140 |
Good |
sold |
Photo /
More Info. |
110/140: |
|