Net Machinery Home View Machinery for sale Index of Sold Archive
You are viewing a list of sold machinery in the NetMachinery Sold Archive. If you are looking for available machinery click View Machinery for sale
Home > Sold Machinery Archive > Metalformers, Benders, Notchers, Swagers > Benders-Pipe and Tube

We found 48 matching ads. Now displaying the remaining 48 ads.

(Tip: Click on the column headers to sort your results by that criteria)
Year Make Model Condition Price Details

Ad # 13005Benders-Pipe and Tube
Ad to Checklist
2010 ERCOLINA 050KD Excellent sold small camera icon Photo / More Info.
Bending capacity ¼″ to 2½″ Diameter: PURCHASED BRAND NEW IN 2010 Ercolina's 050KD Top Bender is ideal for producing consistent quality bends in pipe, tube, squares, solids and other profiles. It's 2 speed programmable. Me and my husband purchased this machine directly from the manufacturer new in 2010. We used for about 8mos. and stored it away in storage afterwards. Location: South Atlanta Storage This Pipe and Tube Bender Comes With Extra Features Valued at over $2,000 -CENTER FORMER 57MM CLR 1"SQUARE CRUSH BEND -COUNTER BEND BRONZE 1 SQUARE EXTRA BONUS ADDED FOR YOU! WE ALSO HAVE SOME 1" SQUARE TUBING FOR SALE IN 20FT AND 24 FT POLE Features • Bending capacity ¼″ to 2½″ Diameter • Bends to 180° with maximum CLR of 11⅞″ • CLR as small as 2D with non-mandrel tooling • Ideal for bending pipe, tube, squares, rectangles, solids and other profiles • Replaces outdated ram style hydraulic benders • Programmable material springback compensation • Operator friendly controls • Vernier scale for counterbend axis position • Patented tooling system with multiple radii available • Single bending speed • Remote foot pedal allows hands free operation (optional) • Patented swing away counterbending die vise • Portable with base wheels and lift handle • Accepts Ercolina's ® two axis A40/P positioning table for multiple and sequential bends • Hex mount tooling system for rapid changeover • No hydraulic components Dimensions Minimum Diameter ¼" Maximum Diameter 2 ½" tube / 2" Sch. 40 pipe Minimum CLR 2D Depending material and wall thickness Maximum CLR 11-7/8" Angle Range 0-180° Bending Speed 1.2 RPM Programming Bend angle and springback Mandrel Capable No Two Axis Positioner Yes- optional accessory Voltage Requirement 220 or 440V 3Ph Motor 2HP 50-60Hz Height 39" Width 20" Length 27" Shipping Weight 430 lbs.

Ad # 1615Benders-Pipe and Tube
Ad to Checklist
1999 C.V.G. PGM-72 Good Sold small camera icon Photo / More Info.
2" Schedule 40 Pipe Bender: More info to come!!!

Ad # 8051Benders-Pipe and Tube
Ad to Checklist
2005/6 Horn CSM A89TNC-PB Excellent sold small camera icon Photo / More Info.
3-1/2" Capacity CNC Tube/Pipe Bending Machine: Bending Capacity / Round Tube / Mild Steel (S=40kgf/mm2) mm 89.0 x 4.0 Bending Capacity / Round Tube / Non-Ferrous (S=25kgf/mm2) mm 89.0 x 7.0 Bending Capacity / Round Tube / Stainless (S=60kgf/mm2) mm 89.0 x 2.5 Bending Capacity / Square Tube / Mild Steel (S=40kgf/mm2) mm 60.0 x 5.0 Max. Bending Radius mm 50 ~ 300 Max. Bending Angle Degree 190 Max. Difference Between two Radii (R2-R1) mm NA Max. Length over Mandrel mm 2600 Working Height mm 1160 Tooling Center Line Height mm 55 DOB (Bending) Speed deg / sec 30 Accuracy of DOB (Bending) Degree ±0.15 POB (Rotation) Speed deg / sec 94 Accuracy of POB (Rotation) Degree ±0.1 Motor for Hydraulic Kw 12.5 Max. Pressure kgf / cm2 140 Hydraulic Tank Capacity Liter 160 Machine Length mm 5200 Machine Width mm 1350 Machine Height mm 1350 Machine Weight Kg 3500 Accuracy of DBB (Feeding) mm ±0.1 POB (Rotation) Speed deg / mm 240 Accuracy of POB (Rotation) Degree ±0.1 Motor for Hydraulic Kw 7.5 Total Power Kw 32 Max. Pressure kgf / cm2 140 Hydraulic Tank Capacity Liter 180 Control: PLC Based with 10" LCD Touch Screen Control. Right Hand Bending. Single Stack Tooling. BEND (C axis) is driven by Hydraulic drive system and encoder. Smart Carriage Rotation (B axis) - AC Servo Motor Drive. Gives exact and repeatable plane of bend position. Distance between bends (Y axis), with 8 adjustable stops for gauging the distance between bends. Program Storage: Max. 100 components with up to 10 bends. Digital setting and memory for Pressure of bending, clamping and mandrel retraction. Spring Back Compensation Setting. Display of malfunctions. Pressure Die assist with adjustable controls (Booster). Anticipated Mandrel Retraction Unit (AMRU). Drop away Clamp. Water Cooling System. (optional air system). One-shot Slideway Lubrication to bend arm assembly for helping to reduce maintenance time. Foot Pedal Cycle Start-E-Stop. Wiper Die Bracket. 3 Mandrel Rods. Operator and Maintenance Manuals. Tool Box with basic tools. Electricity: As Required. Bending Capacity may vary depending on OD, WT, CLR and Material. The general information in this document is not binding in details. Horn Machine Tools, Inc. retains the right to amend designs from time to time without prior notice. Single stack bender with a manual Y axis

Ad # 4321Benders-Pipe and Tube
Ad to Checklist
1995 Pines T-4 # / M 54035 Very Good Sold small camera icon Photo / More Info.
Pines 6" Dia. max Programable Bend Pipe Bender: # 4 unit is Fitted with a T-6 Booster pump to enable bending up to 6" Pipe....

Ad # 9830Benders-Pipe and Tube
Ad to Checklist
2009 JD squared Model 4 Excellent sold No Photo / More Info.
—: This was used for 1 project for 1 week like new. Comes with 4 sets of dies 2 inch, 1 1/2 inch, 1 inch, and a square die. Has a 10 ton cylinder the machine is a electric hydraulic with stand and die holder.

Ad # 6968Benders-Pipe and Tube
Ad to Checklist
2000 Hossfeld B-2 W/ hyd. assist Very Good Sold small camera icon Photo / More Info.
Hyd. tube bender : rotary style bender Includes dies: 1" x 3" clr, 1-1/4" x 4.5 clr, 1-1/4" x 5.5CLR, 1/2" x 3 clr, 1" x 1" square

Ad # 11740Benders-Pipe and Tube
Ad to Checklist
10/79 Pine #2 Excellent sold small camera icon Photo / More Info.
pines # 2: Manufacturer: Teledyne Pipes Model No.: 2 Type: Tube Bender, Hydraulic Serial Mo.: 11235-79141 Max. Radius: 12" Max. Pressure: 2000 PSI Spindle Torque: 11,529 Ft. Lbs. Chain: 2 in. Pitch Bending Rotation: Counter Clockwise Max. Bend Angle: 180° + Over Bend for Springback Max. Tube Length: 13' Bending Arm Speed: 5-1/2 RPM Pump Motor: 10HP Electrical: 460V, 3Ph, 60Cy

Ad # 6899Benders-Pipe and Tube
Ad to Checklist
PINES 2 Very Good Sold small camera icon Photo / More Info.
#2 PINES HORIZONTAL PIPE TUBE AND BAR BENDER: #2 PINES HORIZONTAL PIPE TUBE AND BAR BENDER CAPACITY STEEL PIPE (SCHEDULE 80) ............. 2´´ CAPACITY NON-FERROUS TUBE (Y.P. TO 25K PSI) ... 3´´ X .188´´ CAPACITY STEEL TUBE (Y.P. TO 40K PSI) ......... 3´´ X .109´´ CAPACITY STAINLESS TUBE (Y.P. TO 60K PSI) ..... 3´´ X .065´´ CAPACITY SQUARE TUBE (MILD STEEL) ............. 2-1/2´´ X .083´´ CAPACITY ROUND BAR (MILD STEEL) ............... 1-7/8´´ CAPACITY SQUARE BAR (MILD STEEL) .............. 1-11/16´´ MAXIMUM RADIUS ................................ 12´´ MAXIMUM BEND ANGLE ............................ 180 DEGREE + OVERBEND MAXIMUM TUBE LENGTH OVER MANDREL .............. 7'5´´ BENDING ROTATION .............................. COUNTER CLOCKWISE AVERAGE BENDING ARM SPEED ..................... 5-1/2 RPM OPERATING PRESSURE ............................ 2000 PSI 8-POSITION DEGREE OF BEND SELECTOR ............ YES HYDRAULIC MANDREL EXTRACTOR & CLAMPING ........ YES BIJUR LUBRICATION ............................. YES MOTOR ......................................... 7-1/2 HORSEPOWER

Ad # 6895Benders-Pipe and Tube
Ad to Checklist
1979 PINES 5T Very Good SOLD small camera icon Photo / More Info.
1´´ PINES #5T VERTICAL HYDRAULIC TUBE BENDER: 1´´ PINES #5T VERTICAL HYDRAULIC TUBE BENDER BENDING CAPACITY: ONE STEEL TUBE ....................... 1-1/4´´ O.D. X .065´´ WALL TWO STEEL TUBES ...................... 1´´ O.D. X .065´´ WALL PRESSURE CAPACITY .................... 5 TONS MAXIMUM BENDS PER HOUR (2 TUBES) ..... 2000 MAXIMUM BEND ANGLE ................... 100 DEGREES MAX. CENTERLINE RADIUS (<90 DEGREES) . 4-1/2´´ MIN. CENTERLINE RADIUS ............... 2 TO 3 X TUBE DIAMETER HEIGHT TO DIES ....................... 40´´ AUTOMATIC INDEXING 10-POSITION TURRET SELECT FOR ANGLES ELECTRICAL & HYDRAULIC CONTROLS 20 HORSEPOWER HYDRAULIC MOTOR

Ad # 6896Benders-Pipe and Tube
Ad to Checklist
PINES 1400 Very Good SOLD small camera icon Photo / More Info.
1-1/4´´ PINES #1400 ROTARY HYDRAULIC BAR/TUBE/PIPE BENDER: 1-1/4´´ PINES #1400 ROTARY HYDRAULIC BAR/TUBE/PIPE BENDER BENDING CAPACITIES ....................... (O.D. X WALL): SCHEDULE 80 PIPE ......................... 840´´ X .147´´ NON-FERROUS TUBE {25000 PSI Y.P.) ........ 1-1/4´´ X .065´´ STEEL TUBE (40000 PSI Y.P.) .............. 1-1/8´´ X .065´´ STAINLESS TUBE (60000 PSI Y.P.) .......... 7/8´´ X .065´´ MILD STEEL ROUND BAR ..................... 3/4´´ MAXIMUM BENDING RADIUS ................... 8-3/4´´ MAXIMUM BENDING ANGLE .................... 180 DEG. + OVERBEND MAXIMUM TUBE LENGTH OVER MANDREL ......... 108´´ BENDING ARM SPEED ........................ 24 RPM 4' TABLE EXTENSION ....................... YES 8-POSITION AUTOMATIC DEGREE-OF-BEND SELECTOR PIVOTING HEAD ALLOWS FOR COUNTER & CLOCKWISE BENDING ROTATION 3 HORSEPOWER HYDRAULIC MOTOR

Ad # 6894Benders-Pipe and Tube
Ad to Checklist
1981 PINES 5T Very Good SOLD small camera icon Photo / More Info.
1" PINES #5T VERTICAL HYDRAULIC TUBE BENDER: 1" PINES #5T VERTICAL HYDRAULIC TUBE BENDER CAPACITY TUBING NON FERROUS ............................. (2) 1´´ X .072´´ MILD STEEL .............................. (2) 1´´ X .065´´ STAINLESS ............................... (2) 1´´ X .049´´ SQUARE .................................. (2) 7/8´´ X .035´´ ROUND BAR ............................... (2) 5/8´´ SQUARE BAR .............................. (2) 1/2´´ BENDS PER HOUR (MAXIMUM) ................ 2000 MAXIMUM BENDING ANGLE ................... 100 DEGREES MINIMUM CENTERLINE RADIUS ............... 2 TO 3 X TUBE DIAMETER MAXIMUM CENTERLINE RADIUS 90 DEGREES .... 4-1/2´´ PUSH BUTTON CONTROLS .................... YES 10-STATION AUTOMATIC BEND SELECTOR ...... YES TRABON LUBE SYSTEM ...................... YES DUAL PALM BUTTONS ....................... YES MOTOR ................................... 20 HORSEPOWER

Ad # 6898Benders-Pipe and Tube
Ad to Checklist
1970 PINES 1 Very Good SOLD small camera icon Photo / More Info.
PINES #1 HORIZONTAL PIPE & TUBE BENDER: PINES #1 HORIZONTAL PIPE & TUBE BENDER STEEL PIPE, SCHEDULE 80 .................. 1´´ NON-FERROUS TUBE, Y.P. TO 25K PSI ........ 1-1/2´´ X .188´´ STEEL TUBE, Y.P. TO 40K PSI .............. 1-1/2´´ X .109´´ STAINLESS TUBE, Y.P. TO 60K PSI .......... 1-3/8´´ X .065´´ ROUND BAR, MILD STEEL .................... 1-1/8´´ MAXIMUM TUBE LENGTH OVER MANDREL ......... 9'11´´ MAXIMUM RADIUS ........................... 8´´ MAXIMUM BEND ANGLE ....................... 180 + OVERBEND BENDING ARM SPEED ........................ 17 RPM OPERATING PRESSURE ....................... 1000 PSI BENDING ROTATION ......................... COUNTER CLOCKWISE BIJUR LUBE ............................... YES DEGREE OF BEND TURRET .................... (8) HYDRAULIC MANDREL EXTRCTOR ............... YES MOTOR .................................... 7-1/2 HORSEPOWER

Ad # 6900Benders-Pipe and Tube
Ad to Checklist
1993 PINES 2 Excellent Sold small camera icon Photo / More Info.
PINES MODEL #2 ROTARY HYDRAULIC BAR, TUBE & PIPE BENDER: PINES MODEL #2 ROTARY HYDRAULIC BAR, TUBE & PIPE BENDER CAPACITY: STEEL PIPE (SCHEDULE 80) ................. 2´´ NON-FERROUS TUBE (Y.P. TO 25K PSI) ....... 3´´ X .188´´ STEEL TUBE (Y.P. TO 40K PSI) ............. 3´´ X .109´´ STAINLESS TUBE (Y.P. TO 60K PSI) ......... 3´´ X .065´´ SQUARE TUBE (MILD STEEL) ................. 2-1/2´´ X .083´´ ROUND BAR (MILD STEEL) ................... 1-7/8´´ SQUARE BAR (MILD STEEL) .................. 1-11/16´´ MAXIMUM RADIUS ........................... 12´´ MAXIMUM BEND ANGLE ....................... 180 DEGREE + OVERBEND MAXIMUM TUBE LENGTH OVER MANDREL ......... 7'5´´ BENDING ROTATION ......................... COUNTER CLOCKWISE AVERAGE BENDING ARM SPEED ................ 5-1/2 RPM OPERATING PRESSURE ....................... 2000 PSI 8-POSITION DEGREE OF BEND SELECTOR ....... YES HYDRAULIC MANDREL EXTRACTOR & CLAMPING ... YES BIJUR LUBRICATION ........................ YES MOTOR .................................... 7-1/2 HORSEPOWER

Ad # 6897Benders-Pipe and Tube
Ad to Checklist
1980 PINES 3T Very Good SOLD small camera icon Photo / More Info.
PINES MODEL #3T VERTICAL HYDRAULIC BENDER: PINES MODEL #3T VERTICAL HYDRAULIC BENDER CAPACITY .................................. 3 TONS NON-FERROUS TUBING (25,000 PSI) ........... 1´´ X .083´´ WALL MILD STEEL TUBING (40,000 PSI) ............ 1-1/4´´ X .065´´ WALL STAINLESS STEEL TUBING (60,000 PSI) ....... 1-1/4´´ X .049´´ WALL SQUARE TUBING, MILD STEEL ................. 1´´ X .065´´ ROUND BAR (MILD STEEL) .................... 3/4´´ SQUARE BAR (MILD STEEL) ................... 9/16´´ CENTERLINE RADIUS ......................... 4-1/2´´ MAXIMUM BEND ANGLE WITH NORMAL TOOLING ............ 140 DEGREES MAXIMUM BEND ANGLE WITH SPECIAL TOOLING ........... 165 DEGREES MAXIMUM PRODUCTION SPEED .......................... 1500 BENDS PER HOUR AUTOMATIC 10 STATION ANGLE BEND SELECTOR .. YES KNEE MOUNTED WING DIE ..................... YES CUSHION CYLINDER .......................... YES OIL COOLER ................................ YES MOTOR ..................................... 20 HORSEPOWER

Ad # 12820Benders-Pipe and Tube
Ad to Checklist
Hossfeld No 2 Good sold small camera icon Photo / More Info.
2" od tube: Hossfeld No 2 Hydralic unit bend up to 2" Tubing. 1-1/4" – 2" OD Tube 1" – 2" Sched. 40 Pipe 1-1/2" x 1-1/2" x 1/8" through 2" x 2" x 3/16" Angle Iron 3/4" –1-1/4" Round or Square Bar Rectangular Tube up to 1" x 2" Edgebend Flat stock up to 1/2" thick Lots of railing dies included.

Ad # 6634Benders-Pipe and Tube
Ad to Checklist
Superior Mufflers/Worth 2-1/2" Very Good Sold small camera icon Photo / More Info.
Hydraulic Muffler Pipe Bender with Tooling: Bend Radius Settings: 0 - 180 deg. Internal Pipe Swaging Mandril Attachment (with sets of swages) 5 Hp motor Unit on Castors

Ad # 12471Benders-Pipe and Tube
Ad to Checklist
2006 Ercolina 030 with a40p attachment Excellent sold small camera icon Photo / More Info.
1-1/2" che 40 pipe cap: Ercolina 030 bender 1-1/2" sch 40 pipe cap 3" OD stainless 0,065 wall 2" square-0.118 wall elec weld seam mild steel this is a nice tube bender it has several dies included with it it is programable and has been used very little. it also has the axis positioner with air chuck you can rotate your stock 360 degrees.

Ad # 13392Benders-Pipe and Tube
Ad to Checklist
2010 Ercolina 050KD Top Bender Excellent sold small camera icon Photo / More Info.
Mild steel tube capacity 2-1/2": Mild steel tube capacity 2-1/2" Pipe capacity 2" Sch. 40 Square tube capacity 2" Maximum CLR 11-7/8" Bend to CLR as small as 2D Simple control with programmable bend angle Material spring back compensation with readout Quick-change tooling system Single Bending Speed

Ad # 12419Benders-Pipe and Tube
Ad to Checklist
2006 Ecolina 030 mega bender Excellent sold No Photo / More Info.
3" round cap: This ercolina 030 rotary draw bender is in excellent condition it also has a axis positioner with it with a 12 ft bed. And lots of dies. It was bought new in 2006 by us and used very little in research and development projects. It has a 30 program capacity with up to 30 bends per program and also has a foot pedal control. Mild steel tube capacity 3 Pipe capacity 2-1/2 Sch. 10 Square tube capacity 2 Maximum CLR 15 Bend to CLR as small as 2D Touch screen programming with system diagnostics in multiple languages Quick-change tooling system Digital display of bend angle Material spring back compensation Accurate counterbending die positioning Foot pedal control for hands-free operation Accepts Ercolinafs A40-P two axis positioning table for multiple and sequential bends Mandrel upgrade available

Ad # 14642Benders-Pipe and Tube
Ad to Checklist
2003 Ercolina 060 superbender Good sold small camera icon Photo / More Info.
1-1/2" pipe: Ercolina 060 Super bender w/ positioning table capacity: 1-1/2" SCH 40 pipe or 2" tubing includes:positioning table for compound angle bends single bend w/ spring back adjustment like current model SB48 bender note: legs are missing for positioner acc table

Ad # 12263Benders-Pipe and Tube
Ad to Checklist
1997 Ercolina top bender-050 Good sold small camera icon Photo / More Info.
2-1/2" OD : Ercolina- top bender-TB 050 software #RC0063B-T rotary draw style bender foor pedal operation Note:Several Pipe dies-tooling included ● Bends material to 2½” OD ● Heavy-duty gear case with maximum 11⅞” CLR ● Patented tooling system achieves CLR two times diameter without mandrel ● Low voltage 24V controls ● Operator friendly control panel memorizes bend angle and springback ● Programmable bend angles 0 to 180° ● Adjustable material springback for bend accuracy ● Single bending speed ● Bends to 90° in five seconds ● Remote foot pedal for hands free operation ● Patented swing away vise system and hex mounted tooling increase productivity ● Overload protection controls ● Standard multiple language capability ● Transportation wheels and lift handle built into base cabinet ● Tool free tooling changes with multiple CLR available for each diameter ● Accepts Ercolina® two axis A40/P positioner table ● Comprehensive (1) one-year warranty Machine Capacities Material Maximum Maximum Diameter Thickness Pipe 2” ID Schedule 40 Mild steel tube 2½” .125 Soft brass 2½” .140 Stainless steel 2½” .065 Welded furniture tube 2½” .125 ST 35 hydraulic steel 2½” .125 304L hydraulic stainless 2½” .095 Hard copper and aluminum 2½” .187 Round solids 1½” -- Rectangular solids ⅜” x 2 ⅜” -- Rectangular tube 1¼” x 2½” .118 Square tube 2½” x 2½” .083 Square solids 1¼” x 1¼” -- Mild steel T 2½” x 2½” .236 Mild steel C channel 2” x 1” .200 All capacities based on mild grade material using machine at low bending speed; Dimensions and Specifications Height x Length x Width 30” x 20” x 40” Bending speed 1.7 Motor 220 volt Minimum and Maximum CLR ⅜”-15” Bending angle range 0 to 180◦ Weight 374 Also have manual in digital form-PDF

Ad # 14041Benders-Pipe and Tube
Ad to Checklist
? Hossfeld #2 Hydraulic Good sold small camera icon Photo / More Info.
up to 2" round tube: Hossfeld no 2 bender Hydralic unit Lots of tooling-small crate full includes:below 13B8-Pipe Die 1 1/4" 13B4-pipe die 1-3/4" 13B6-1-1/2" Pipe Die 30B-Master Die Assembly 3/16" x 2" x 2" 26B-Sharp Square. Bending Block 60B-Bulldozer Die Set Make closed Eyes and sharp bends 3/16" x 4-1/2 2-1/2" x 3/4" radius die plus manu other items shown in picture Round OD Tube up to 2" Square Tube up to 1-1/2" Schedule 40 Pipe up to 2" Rectangular Tube Angle Iron Flat Bar Handrail Scrolls hossfeld # 2 hydraulic bender w/stand lots tooling included The standard Model No. 2 Bender is the original UNIVERSAL™ bender for Tube, Pipe, Flat, Bar, Angle Iron, Handrail, Scrolls, and more. It's equipped with standard tooling to fit most of our die sets.* hundreds of dies to fit this bender sold seperatly. Equip your shop with a multi-functional bender. * Some dies require additional tooling Features Rotary-draw bender; minimizes distortion Multi-functional — one bender, hundreds of dies for all your jobs Solid steel; heat-treated for strength and durability; virtually indestructible Easy-install dies drop in place with pins; no wrenches Dies don't require replacement like some other benders Hydraulic power unit ads up to 1000 psi force manual included

Ad # 2866Benders-Pipe and Tube
Ad to Checklist
1987 ADDISON/PRESSBEND DB-40 CNC-M Good sold small camera icon Photo / More Info.
ADDISON/PRESSBEND : MAXIMUM OUTSIDE DIAMETER 1.57” MINIMUM OUTSIDE DIAMETER 0.315 MAXIMUM WALL THICKNESS 0.118” MINIMUM CENTERLINE RADIUS 9.4” MAXIMUM BEND ARM MOVEMENT190 DEGREES MAXIMUM LEGNTH OVER MANDREL 118.1” / 157.4” MINIMUM LENGTH BEFORE LAST BEND 1.97” WORKING HEIGHT 39.96 TOOLING CENTER HEIGHT 1.18” MANDREL STROKE 3.94” FOLLOWER STROKE 15.75” REACTION STROKE 8.86” VERTICAL SHIFT 2.36” HORIZONTAL SHIFT 8.07” MAXIMUM DIFFERENCE BETWEEN RADII 7.09” AXIS SPEEDS (9 PER AXIS) Y = 52” PER SECOND B = 60 RPM C = 40 RPM C AXIS STALL TORQUE 3660 Nm AT 2175.566 PSI HYDRAULIC SUMP CAPACITY 52.83 US GALLONS HYDRAULIC SYSTEM PRESSURE 2175.566 PSI

Ad # 14035Benders-Pipe and Tube
Ad to Checklist
? Hossfeld #2 Good sold small camera icon Photo / More Info.
2" tube and pipe-manual bender: Hossfled Bender-manual Model: #2 Capacity: 2" pipe and tube Comes with blocks, rollers, pins, handle, extension and stop Pipe dies 180 degree bend: 1/2"P x 1.75" CLR 1/2"P x 3" CLR 3/4" P x 4" CLR 1" x 5" CLR 2" x 8" CLR Tube dies 180 degree bend 3/4" x 3" CLR 7/8" x 8 1/2" CLR 1" x 8" CLR 1" x 3" CLR 3/4" x 7" CLR 1 1/4, 1 1/2, 2" Square tubing crush bend 4" inside radius Follow Along large CLR tubing dies: 1" P x 48 CLR 1" P x 24" CLR 1" T x 83" CLR 1" T x 48" CLR 3/4" T x 14" CLR 3/4" T x 13" CLR

Ad # 10334Benders-Pipe and Tube
Ad to Checklist
Hines 300NC Very Good sold No Photo / More Info.
Hines 300NC Tube Bender:

Ad # 5983Benders-Pipe and Tube
Ad to Checklist
1959? Pines 3/4 Fair sold small camera icon Photo / More Info.
Pines Model 3/4 Pipe Bender With Lots of Tooling: Maximum Radius..........................10" ...

Ad # 5977Benders-Pipe and Tube
Ad to Checklist
1997 Ercolina TB 60 -Top Bender Good Sold small camera icon Photo / More Info.
2-1/2" Pipe Dia Cap.: Pipe/Tube Bender: Capacity: Min. Diameter: 1/4" Max. Diameter: 2-1/2"Pipe Min. CLR: 2D Max. CLR: 15" Angle Range: 0 - 180 deg Bending Speed: 2.5 rpm max. Mandrel Capable? - NO Programming: NC 10 Individual programs with (9) bends within each.

Ad # 12186Benders-Pipe and Tube
Ad to Checklist
1997 Ercolina top bender-050 Good sold small camera icon Photo / More Info.
2-1/2" OD: Ercolina- top bender-TB 050 software #RC0063B-T rotary draw style bender foor pedal operation ● Bends material to 2½” OD ● Heavy-duty gear case with maximum 11⅞” CLR ● Patented tooling system achieves CLR two times diameter without mandrel ● Low voltage 24V controls ● Operator friendly control panel memorizes bend angle and springback ● Programmable bend angles 0 to 180° ● Adjustable material springback for bend accuracy ● Single bending speed ● Bends to 90° in five seconds ● Remote foot pedal for hands free operation ● Patented swing away vise system and hex mounted tooling increase productivity ● Overload protection controls ● Standard multiple language capability ● Transportation wheels and lift handle built into base cabinet ● Tool free tooling changes with multiple CLR available for each diameter ● Accepts Ercolina® two axis A40/P positioner table ● Comprehensive (1) one-year warranty Machine Capacities Material Maximum Maximum Diameter Thickness Pipe 2” ID Schedule 40 Mild steel tube 2½” .125 Soft brass 2½” .140 Stainless steel 2½” .065 Welded furniture tube 2½” .125 ST 35 hydraulic steel 2½” .125 304L hydraulic stainless 2½” .095 Hard copper and aluminum 2½” .187 Round solids 1½” -- Rectangular solids ⅜” x 2 ⅜” -- Rectangular tube 1¼” x 2½” .118 Square tube 2½” x 2½” .083 Square solids 1¼” x 1¼” -- Mild steel T 2½” x 2½” .236 Mild steel C channel 2” x 1” .200 All capacities based on mild grade material using machine at low bending speed; Dimensions and Specifications Height x Length x Width 30” x 20” x 40” Bending speed 1.7 Motor 220 volt Minimum and Maximum CLR ⅜”-15” Bending angle range 0 to 180◦ Weight 374 Also have manual in digital form-PDF Includes these tooling dies and formers: (all for round tubing=1-3/4"-R70, 1-1/4-R87, 1-3/8-R12, 1-1/2-R90, 3/4-R56, 7/8-R67,3/8"-R36, 1/2" R36, 1-1/8" R82, 1-1/2"-R150

Ad # 11192Benders-Pipe and Tube
Ad to Checklist
1995 Addison AB-60 Good sold small camera icon Photo / More Info.
2.5" capacity mandrel bender: 1995 Addison mandrel tube bender model# AB-60 2.5"=60mm capacity-round on 4mm wall 1.5" cap square nc rotation w/ push to position lock some tooling (used) ADDISON Model AB60 CNC tube bender new 1995 and in plant under power. The machine has the following general specifications: - please contact us for a complete description. Capacity, (based on carbon steel tubing) Tube outside diameter, maximum - 60mm Tube wall thickness, maximum - 4.0mm Centerline radius, maximum - 300mm Bend arm rotation (i.e. bend angle) C-axis - 193 degrees Length of tube over mandrel rod into collet - 3000mm Length of tube into collet before last bend - subject to tooling limitations, Y-axis - 250mm Mandrel reaction stroke - 75mm Control features: Model - IBM PC based, Touch screen control, Floppy disc backup drive - Smart card Overal length - 4915mm Overall width - 1125mm Overall height - 1420mm Machine weight, approximate - 5100 lbs

Ad # 12112Benders-Pipe and Tube
Ad to Checklist
diacra # 3 sold small camera icon Photo / More Info.
diacro hand bender #3 : diacro# 3 hand bender max rad: 12" round bar cap" .625 square bar cap: .5" iron pipe cap: .5 some tooling included The Di-Acro Bender is a multi-purpose machine that quickly adapts to a variety of bending operations, whether prototype or production. The Hand Bender is available in four models with capabilities of bending up to 1" round mild steel bar with a radius of 0 - 12". The Model 4 Bender features a selectable ratchet drive mechanism for increased power when working with heavier materials.

Ad # 12110Benders-Pipe and Tube
Ad to Checklist
Hossfeld univ #2 hyd /# 46000 Good sold small camera icon Photo / More Info.
hossfield # 2 bender-hyd.: hossfeld # 2 hydraulic bender stand some tooling included The standard Model No. 2 Bender is the original UNIVERSAL™ bender for Tube, Pipe, Flat, Bar, Angle Iron, Handrail, Scrolls, and more. It's equipped with standard tooling to fit most of our die sets.* We sell hundreds of dies to fit this bender. Equip your shop with a multi-functional bender. * Some dies require additional tooling Features Rotary-draw bender; minimizes distortion Multi-functional — one bender, hundreds of dies for all your jobs Solid steel; heat-treated for strength and durability; virtually indestructible Easy-install dies drop in place with pins; no wrenches Dies don't require replacement like some other benders hydraulic power unit ads up to 1000 psi Capacity Round OD Tube up to 2" Square Tube up to 1-1/2" Schedule 40 Pipe up to 2" Rectangular Tube Angle Iron Flat Bar Handrail Scrolls

Ad # 12066Benders-Pipe and Tube
Ad to Checklist
2011 Baileigh M150-AS Excellent sold small camera icon Photo / More Info.
—: Baileigh Tube/Pipe Bender – Hardly Used http://www.baileighindustrial.com/benders/tube- pipe-benders/pipe-bending-machine-150-AS.php Bought New: 08/09/11 Paid: $6,595 + $605 for dies Includes: 1” dies and 1.125” Remarks: Very accurate bender, simple to set up and operate and its fast.

Ad # 12064Benders-Pipe and Tube
Ad to Checklist
2011 Tauring Slalom Excellent sold small camera icon Photo / More Info.
Per Link: Tauring Slalom cnc bender Includes: Pneumatic bender, CNC-8 Control Unit, Foot Pedal Manual Control, 20’ tube supporter with Z rotational capability. 1” and 1.125” tube dies and 1” flat strip die. Bought new 05/02/11 Paid $179,442.88 Comes with 20 foot tube feeder with attachment that turns to allow 3 dimensional bends Comes with CNC 8 controller, provides full computer control. Comes with manual controller Can roll up to 2 inch (50.8mm) diameter tube or pipe How long tube can in the machine? 20 feet Are all handbooks with the machine? YES Is the operators manual for the machine in English? YES Comes with Dies for 1", 1.125" and 1" flat strip

Ad # 7510Benders-Pipe and Tube
Ad to Checklist
2004 Eagle BA-35 Very Good Sold small camera icon Photo / More Info.
2004 Eagle BA-35 Tube Bender: Eagle BA-35 Full Featured Hydraulic Computer rolled ring bending machine variable speed rotation 3.5" floppy drive 1" and 1 1/2" Square set of dies and 1 1 3/8" round die that are made of nylon for soft materials * All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing. Full Machine Specifications PC Based Control Industrial PC with 3.5" Floppy Drive Unlimitied Storage Capacity Three Driven Shafts for Driving of the Profile Oil Bath Speed Reducer Variable Rotation Speed Hydraulic Powered Forming Roll Hydraulic Power Unit Dual Lateral Material Guide, four way adjustable Vertical and Horizontal Operating Positions with Rests on Remote Pulpit with Push Buttons Heavy Duty Foot Pedals & Emergency Stop Digital display Operating & Maintenance Manuals Key Switch Security Lockout RS 232 Serial Port "Automatic Interpolation" Software "Auto Motor Image" Capability "Graphic Imaging" 1" and 1 1/2" Square set of dies and 1 1 3/8" round die that are made of nylon for soft materials

Ad # 11141Benders-Pipe and Tube
Ad to Checklist
1972 Pines #2 Good sold small camera icon Photo / More Info.
used pines # 2 bender: Pines #2 bender with assorted dies

Ad # 13218Benders-Pipe and Tube
Ad to Checklist
2013 MACKMA BM48 New sold small camera icon Photo / More Info.
1"1/4 SCH40: Technical Data. - Pipe Max. outside diameter: 1"1/2 - Max Torque: 1400 N/m - Max. Capacity using EU Steel Fe 42: 48x1,5 mm - Max. Capacity using US Steel Fe 56: 1''1/4 Sch 40 - Maximum radius: 260 mm - Max. bending angle: 210° - Variable bending speed: from 1,5 rpm to 4,5 rpm

Ad # 5825Benders-Pipe and Tube
Ad to Checklist
1965 PINES # 1-1/4 Very Good Sold small camera icon Photo / More Info.
Pines #1 Hydraulic Tube Bender with Mandrell Extractor: Radius Capacity 12" Maximum Bend Angle 180°+ Overbend for Springback Material Capacities: 2½" x .065 (Mild Steel) 1¾" x .065 (Stainless Steel) 3" x .065 (Non-Ferrous) 1¼ Steel Pipe 1¾" x .065 Square Tubing 1-3/8" Round Bar 1-1/8" Square Bar Equipped with: Pines Turret Stop Control Pressure Die Assist Cylinder Hydraulic Mandrel Extractor Pedistal Operator Control

Ad # 5826Benders-Pipe and Tube
Ad to Checklist
1989 PINES # 2 Very Good Sold small camera icon Photo / More Info.
Pines # 2 Hydraulic Tube Bender with Mandrell Extractor: Counter Clockwise Swing Arm Rotation, Left Hand Radius Capacity 12" Maximum Bend Angle 180°+ Overbend for Springback Material Capacities: 3" x .109" (Mild Steel) 3" x .065" (Stainless Steel) 3" x .188" (Non-Ferrous) 2" x Schedule 80 Steel Pipe 2½" x .083" Square Tubing 1-7/8" Round Bar 1-11/16" Square Bar Bending Speed 6 RPM Bending Accuracy +/- 1/4° Motor 10 H.P., 230/460 Volts, 3 Phase Equipped with: Pines Turret Stop Control Pressure Die Assist Cylinder Hydraulic Mandrel Extractor Pedistal Operator Control Some Round Tube Tooling Operators Manual

Ad # 5791Benders-Pipe and Tube
Ad to Checklist
2005 Ercolina Superbender 60 Excellent Sold small camera icon Photo / More Info.
Tube Bender with Large Radius Kit: Bought new in early 2005. Less that 24 hours use. Has Large Radius Tube Kit...

Ad # 15068Benders-Pipe and Tube
Ad to Checklist
Conrac 220-RH Good sold small camera icon Photo / More Info.
2" mandrel type: Conrac Model: 220-RH 2" Used Conrac Synchro Hydraulic Tube Bender, Mdl. 220-RH Hydraulic Tube Bender Hydraulic Mandrel Extractor, 10-Stop Synchro Control, Pressure Die Slide Booster, 10 H.P. Motor

Ad # 13131Benders-Pipe and Tube
Ad to Checklist
2002 Bema G 45 CN D-S Good sold small camera icon Photo / More Info.
1.77" dia Tube max: Bema Model G 45 CND Year 2002 BENDING CAPACITIES WITH STEEL ROUND TUBE ---------- 1.77"dia X .098" wall Max bending capacity using soft round tube: brass, copper , aluminium: 1.97" x 0.119" Max bending :SQUARE TUBE ------- 1.38" X .06"wall Min bend radius : 0.86in max work length: 14.77 ft RECTANGULAR TUBE,BENT SIDE-1.57" X .8" X .08" RECTANGULAR TUBE,BENT FLAT-1.57" X .8" X .118" MAX BENDING RADIUS WITH ROLLERS ------- 9" INTERIOR MIN BENDING RADIUS ----------- .87" MAX BENDING ANGLE --------------------- 190 DEGREES MAX LENGTH ---------------------------- 133" INDEX OF ROTATION SPEED --------------- 110 DEGREES/SECOND MAX ABSORBED POWER -------------------- 13 HP NOISE --------------------------------- 75 dB APPROX. WEIGHT ------------------------ 3500 LBS operating power: 8.5KW ---note: 400/3volt base machine-european ,comes with 220/3 transformer also includes dies for 5/8" dia round tube only

Ad # 7113Benders-Pipe and Tube
Ad to Checklist
Superior Muffler/Worth 2-1/2 inch Diameter Very Good sold small camera icon Photo / More Info.
2-1/2 Hydraulic Muffler Pipe Bender with Lots of Tooling : Bend Radius Settings: 0 - 180 deg. Internal Pipe Swaging Mandril Attachment (with sets of swages) 5 Hp motor Unit on Castors Sets of Internal Swages. Sets of dies (2 x half dies and a radius die) for the following pipes: 1-3/8" dia. 1-5/8" dia. 2" dia. (2 sets) 2-1/8" dia. (2 sets) 2-3/8" dia. 2-1/2" dia.

Ad # 14515Benders-Pipe and Tube
Ad to Checklist
2012 Sominn Machinery New sold small camera icon Photo / More Info.
—: Die Holder brand new in box. 8 foot long x 5 1/2" x 3" made for a 8 foot Press brake by Sominn Machinery. We ordered the wrong holder for the job we were doing.

Ad # 11000Benders-Pipe and Tube
Ad to Checklist
EATON LEONARD VB 75 HS Very Good sold No Photo / More Info.
—: For Sale Pipe Bending Machine Eaton Leonard VB 75 HS alongwith loader. Machine is in our stock in very good condition.Please feel free to contact us at tradingindia5(at)gmail(dot)com

Ad # 14509Benders-Pipe and Tube
Ad to Checklist
80's? Greenlee 882 Good sold small camera icon Photo / More Info.
2" max pipe to 2 EMT rigid conduit: Greenlee hydraulic tube bender Capacity 882-1-1/4", 1-1/2" and 2" EMT 12 ton ram cylinder Simple, accurate and easy to use. • Flip-Top hinged frame top plate opens for easy, fast loading and unloading. • Ram travel scale and charts for accurate bends, offsets and saddles. 2" pipe max to 2 EMT rigid conduit bends up to 90 degrees includes 3 pipe dies 1-1/2", 1-3/4", 2" uses std.mittler 9000 series dies includes push button hand control nice roll around stand 110/1 voltage hyd power pak specs below: Greenlee hydraulic power pump 1-1/2 hsp- 960PS/960ME Operation 120 VAC 1-1/2 HP (1.12 kW) Capacity 10,000 psi (700 bar); 300 inch3 (4.8 L) per minute rapid advance; 54 inch3 (.9 L) per minute at full pressure Length 12" (305 mm) Width 10-3/4" (223 mm) Height 22-5/16" (567 mm) Useable oil volume: 6-1/4 quarts (5.9 liters) For use with all Greenlee benders. Solid state controls for added reliability. Low pressure for fast ram advance, automatically changes to low volume high pressure. Pendant control

Ad # 11001Benders-Pipe and Tube
Ad to Checklist
EATON LEONARD VB 75 Very Good sold small camera icon Photo / More Info.
—: FOR SALE USED PIPE BENDING MACHINE EATON LEONARD VB 75 ALONGWITH LOADER. MACHINE IS IN OUR STORAGE IN VERY GOOD CONDITION

Ad # 11846Benders-Pipe and Tube
Ad to Checklist
80s Pines T3 Excellent sold small camera icon Photo / More Info.
Pines 1" 1/2": Pines T3 Serial 44361 - 78250 Capcity 1" 1/2" Volts 230/3Phase Dial A Bend Controll

Ad # 9132Benders-Pipe and Tube
Ad to Checklist
2005 Eagle Bending CPD 80 Excellent Sold No Photo / More Info.
tube: 4 X 12ga. .050; Sch.40 Pipe: 3 X .048: EAGLE CPD Series Benders are HEAVYWEIGHT, High Capacity Double Pinch Hydrau...


Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.