Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8083 | Turret Punch Presses-CNC |
1989 |
Wiedemann |
Centrum 1000 Q |
Very Good |
Sold |
Photo /
More Info. |
Centrum 1000 Q, 16.5 Ton 20 Station Punch Press: Wiedemann Centrum 1000 Q --16.5 Ton
Turret Stations: 20 STATION
Control: FANUC OP
2 cabinets of tooling & tool holders included punches & dies. louver dies
software included; pro fab pkg & DNC software
RS232 port w/ post processor-all needed to program offline
39.137 x 39.137 table-single index
40 x 80 W/ index
112 style tooling
max punch 1/4" current punch only 3/16"
Description: Wiedemann Turret press complete with tooling, all (D) (E) (F&G) stations. Fanuc OP Control Air clutch and Brake. Very well maintained machine
|
|
Ad # 6933 | Turret Punch Presses-CNC |
1992 |
AMADA |
APELIO II 357 |
Excellent |
SOLD |
Photo /
More Info. |
AMADA MODEL APELIO II 357 COMBINATION CNC TURRET PUNCH & LASER: Same as AD# 6932 in Laser Category
AMADA MODEL APELIO II 357 COMBINATION CNC TURRET PUNCH & LASER
Capacity: 33 Ton
Maximum Laser Output: 1500 Watt
Maximum Material Thickness (Punch): 1/4" (Mild Steel)
Maximum Sheet Size: 50" x 144" (with Repositioning)
Maximum Axis Movement: x-72"; y-50"; z-11.8" (Laser)
Maximum Sheet Weight: 220 Lbs.
Maximum Feed Speeds: 1968 IPM (X & Y Axes); 472 IPM (Z-Axis)
Maximum Hit Rate: 200 HPM (on 1" Center Moves); Max. SPM: 350
Turret Speed: 30 RPM (Bi-Directional)
Turret Configuration: 58 Stations (Thick) - (36) 1/2"
Diameter.;
(12) 1-1/4" Dia.; (4) 2" Dia.; (2) 3-1/2" Dia.; (2) 4-1/2"
Dia.;
(2) Auto Index (1-1/4" Dia)
EQUIPPED WITH:
Fanuc 05PLA CNC Control
Fanuc 1500 Watt Laser; Chiller Unit
(2) Auto-Index Stations; Programmable Work Chute
Pneumatic Work Piece Clamping; Automatic Repositioning
Hydraulic Clutch & Brake; Tool Balancer |
|
Ad # 11698 | Turret Punch Presses-CNC |
1984 |
amada |
304040 |
Excellent |
sold |
Photo /
More Info. |
30 Ton 58 Station: Amada PEGA 344 Q
Model 304040
Serial P3441364
30 Tons
58 Stations
Travels 39.37" x 39.37" (will punch 48" wide
sheet)
Control Fanuc P
|
|
Ad # 12851 | Turret Punch Presses-CNC |
1999 |
nishinbo |
map1000 |
Excellent |
sold |
Photo /
More Info. |
22: VERY NICE CONDITION NISHINBO TURETT SYSTEM
LOADED WITH TOOLING
MAP 1000 MODEL , ONE OWNER
CLEAN!!!! |
|
Ad # 9752 | Turret Punch Presses-CNC |
1993 |
Trumpf |
9089 Trumatic 500 |
Very Good |
sold |
Photo /
More Info. |
22 Ton , 17 pocket tool changer: 22 Ton17 pocket tool changer
49 x 90" table 2 sides
50" throat
foot switch
Includes : quick set & quick sharp machines and drawers full of tooling..
Std: specs..verify
Description:
TRUMPF TRUMATIC 500 CNC TURRET PUNCH,
TONNAGE 22
MAX. SHEET THICKNESS 0.31"
MAX. SHEET SIZE 52" x 100"
Y-AXIS TRAVEL 50"
X-AXIS TRAVEL 100"
MAX. WORKPIECE WEIGHT 330 lbs
MAX. PUNCH DIA. 3"
MAX. STROKES PER MINUTE 300 (1" MOVES)
MAX. STROKES PER MINUTE ON CONTOURS 600
MAX. LINEAR TABLE SPEED 4300 IPM
MAX. X-AXIS SPEED 3545 IPM
MAX. Y-AXIS SPEED 2362 IPM
MAX. DISTANCE BENEATH STRIPPER 1.5"
APPROX. OVERALL DIMENSIONS 280" L-R x 230" F-B x 95" H
APPROX. WEIGHT 25,000 LBS
EQUIPPED WITH:
-BOSH TRUMAGRAPH CNC CONTROL WITH CRT
-PROGRAMMABLE TOOL ROTATION
-(18) STATION LINEAR AUTO. TOOL CHANGER
-HYDRAULICALLY DRIVEN RAM
-PROGRAMMABLE STROKE CONTROL
-AC MAIN DRIVE MOTOR
-SEPERATE, FREE STANDING CONTROL UNIT
MACHINE WEIGHT: 11050 KG
|
|
Ad # 8944 | Turret Punch Presses-CNC |
1995 |
Maurata Weidemann |
Vectrum 5000 |
Good |
sold |
Photo /
More Info. |
Capacity 50 Ton: Frame Design J-Frame
Press Capacity 50 Ton
Type of Punching Force Hydraulic
X Axis Travel 74"
Y Axis Travel 62"
Throat Depth 62"
Number of Turret Stations 52 Station
Type of CNC Control Fanuc 16P
Type of Clutch & Brake Fully Hydraulic
Maximum Material Thickness 3/8"
Stroke Per Minute Nibble 335 HPM
Strokes Per Minute on 1" Move 215 HPM
Number of Auto Index Stations 2
Type of Turret Tooling 114
Automatic Sheet Repositioning Yes
Equipped With Fully Hydraulic Programmable Ram
52 Station Tuuret
Two Auto Index Stations
Thermal Dynamic 150 AMP Plasma Unit
Chiller Unit
Complete Set of Punch Holders
Assortment of Tooling
Dust Collector
|
|
Ad # 8943 | Turret Punch Presses-CNC |
1994 |
Finn-Power |
TP4025 |
Good |
sold |
Photo /
More Info. |
Capacity 33 Ton: w/Right Angle
Tonnage Capacity 33 Tons
Sheet Size 60" X 100"
Number of Stations 21 Tools (Thick Turret)
7 Auto
Indexing,3 Multi Tool
Max. Punch Diameter .250" (Aluminum, MIld
Steel)
Right Angle Shear 31" X 60"
Equipped With Siemens Sinumerik 880N Control
Loader/Unloader
Sorting/Stacking System
|
|
Ad # 8940 | Turret Punch Presses-CNC |
1998 |
Finn-Power |
A520 |
Good |
sold |
Photo /
More Info. |
Capacity 23 Ton: 23 Tons Hydraulic Punching Force
Programmable Adjustable Punch Stroke (Allowing
Use:) Louver and Emboss Tooling
Programmable Ram Speed
Turret Rotation 30 RPM
Tool Change Time 1 to 2.5 Seconds Max
Punching Speed 320 Hits Per Minute at 1" Centers
Punching Accuracy 0.004"Punching
0.002" Repeatability
Turret Layout 21 Stations
Seven Stations (2 Auto Index; 2 MT8 &MT20; 3
Fixed) 3 1/2"
One Station 2"
Two Auto-Index 1 1/4"
11 Fixed Single Stations (0, 90 and 45 Degrees) 1
1/4"
Maximum Punch Diameter 3.5'"
Maximum Material Thickness 5/16"
Maximum Sheet Weight 440 Lbs.
Sheet Clamping 2 Pneumatic Clamps
Maximum Sheet Size 100" x 50"
X Travel 82"
Y Travel 51"
Control Siemens Sinunerik 840D
RS 232 C Interface
Rapid Feed Rates X Axis 3,456 IPM
Y Axis 2,352IPM
Combined Maximum Traverse Speed 4,164 IPM
Machine Space Required for System Installation
18'x 18's 8.5'
Approximately 32,000 Hours
|
|
Ad # 8946 | Turret Punch Presses-CNC |
1995 |
Strippit |
1000 SXP |
Good |
sold |
Photo /
More Info. |
Capacity 33 Ton: Capacity 33 Tons
Workpiece Size 39.37" x 96"
Turret Drive Bi-Directional
One Station Index Time 0.7 Seconds
Maximum Axis Travel Speed: X-Axis 3200 IPM Y-
Axis 2400 IPM
Punch Capacity 3.5" Diameter 10 Gauge- 1.625"
Diameter 0.250"
Hits Per Minute 1" Centers
Material Thickness Less Than 0.120" 370HPM
Material Thickness More Than 0.120" 280HPM
Contour Nibbling Rate 370HPM
Accuracy +/-0.004"
Punch Motor 7.5HP
Machine Dimensions (W x D x H) 126" x 185" x 86"
Equipped With GE/Fanuc O-P CNC Control
Two (2) Auto Indexing,
RS232 Port
Complete Set of Tooling
33 Station Turret
|
|
Ad # 8945 | Turret Punch Presses-CNC |
1995 |
Murata Centrum |
3000Q |
Good |
Sold |
Photo /
More Info. |
Capacity 33 Ton: 40 Station Turret, Includes 2 Auto Index
33 Tons Punching Capacity
Hydraulic Clutch/ Brake
Fanuc O P Series CNC Controller
114 Style Punch and Die Holders
Maximum Material Thickness .250"
78.740" x 60.039" Table Size ( X x Y )
One (1) Set of Work Holders ( 3 Holders)
|
|
Ad # 8932 | Turret Punch Presses-CNC |
1987 |
Amada Pega |
345 King |
Good |
Sold |
Photo /
More Info. |
1/4" Mild Steel: Max Sheet Size (Without Repositioning) 40" x 50"
Max Punching Capacity (Mild Steel) 1/4"
Max Hits Per Minute 475
Max Sheet Weight 110 lbs
Total Tool Stations in Turret 44
Turret Configuration
18 @ 1/2" Dia
16 @ 1-1/4" Dia
4 @ 2" Dia
2 @ 3-1/2" Dia
2 @ 4-1/2" Dia
2 @ Auto Index (1-1/4" Dia)
Turret Speed 30 RPM
Max Positioning Speed 3150 Inches/Minute
Equipped With GE Fanuc (Amadon) 6M Control
Ball Transfer Table
|
|
Ad # 12670 | Turret Punch Presses-CNC |
1989 |
AMADA |
PEGA 357 |
Excellent |
sold |
Photo /
More Info. |
30 ton: AMADA PEGA 357 CNC TURRET PUNCH PRESS
FrameConstruction:Bridge Typecnc
control:Fanuc04PCPress Capacity: 30Tonnes
(294kN)Press Type:HYDRAULIC COMBINATION
ECCENTRICAxis TraverseDistance:1270 mm x 1830
mmWorkable Max.Sheet Size:1270 mm x 3660
mmmax materialthickness:6.4 mm MSNumber Of
Stations58 Stations: 36 x 12.7 mm 14 x 31.7 mm
(including 2 x Auto Index) 4 x 50.8 mm 2x 88.9 mm
2 x 114.3 mm
ORACLE MACHINE TOOLS UK LTD.
Skype : oracle.machine.tools.uk
Email: sales@industrialmachineryworld.com
|
|
Ad # 5191 | Turret Punch Presses-CNC |
|
Strippit |
Fabri-Center 51/30 |
Fair |
sold |
Photo /
More Info. |
30 Ton Strippit Turret Punch Press: Press Capacity: 30 Ton
No. Of Turrets: 26 min. (may have more!)
Production Rate: 95 Holes/min on 1" Centers
Carriage Travels;
In X 52"
In Y: 52"
Carriage Speeds: 500 ipm (simultaneously)
Max. Workpiece Size: 51" x 51" x 1/4"
Ram Stroke: 7/8"
Feed Clearance: 13/16"
Accuracy: +/- 0.005" non-accumulative Tolerance
Hole Sizes.
Minimum: 0.031" in 16 ga Mild Steel
Maximum: 1-1/4" Dia. in 0.250" Mild Steel
3-1/2" Dia. in 10 ga Mild Steel
5" Dia. in 14 ga Mild Steel |
|
Ad # 10616 | Turret Punch Presses-CNC |
1994 |
Finn Power |
FMS |
Good |
Sold |
No Photo /
More Info. |
35 Ton: Shear Genius. Load/Unload Tower. Machine comes with a lot of extra tooling... |
|
Ad # 6545 | Turret Punch Presses-CNC |
1988 |
Wiedemann |
C-2000 |
Good |
Sold |
Photo /
More Info. |
22 ton, 40" x 50" Sheet Wiedemann C-2000: 22 ton,
22 station,
2 auto index,
40" x 50" sheet size without re-position |
|
Ad # 6446 | Turret Punch Presses-CNC |
1976 |
Strippit |
FC-1000 |
Very Good |
sold |
Photo /
More Info. |
30 Ton, 20 Station Strippit Turret Punch: 20 Station Turret
1 x Station notcher
30 ton
50" throat
1/4" in 3/8" capacity
3.5" hole in 1/8"
Programs stored on either disc or tape and machine can be run from either |
|
Ad # 8566 | Turret Punch Presses-CNC |
1977(?) |
Strippit |
FC 1000 Fabri Center |
Good |
sold |
Photo /
More Info. |
30 Ton, 20 Station Strippit NC Fabri Center Punch Press: Capacity: 30 Ton
Tool Stations: 20
|
|
Ad # 14168 | Turret Punch Presses-CNC |
2001 |
Strippit |
1000M XP/30 |
Needs Work |
sold |
Photo /
More Info. |
30 tons: Its still working but it has some misalignment
problem in the turret. |
|
Ad # 14691 | Turret Punch Presses-CNC |
1990? |
Wiedemann |
M5000 / P46018 |
Good |
sold |
Photo /
More Info. |
45 ton punch/plasma unit: Wiedemann M5000 / P46018 cnc turret punch/nibbler
w/plasma cutter will nibble at 450 hits a minute
in 18ga
std factory specs below-please verify actual
machine
45 TON MURATA WIEDEMANN TURRET PUNCH & LOAD /
UNLOAD SYSTEM
w/FANUC OP CNC CONTROL
MODEL: M5000
SPECIFICATIONS:
Tonnage ................. 45
Table travel ................... 62" x 74"
Maximum sheet size (without repositioning) 60"
x
72"
Maximum sheet size (with repositioning) 60" x
144"
Linear table speed ........ 2500 I.P.M.
Maximum sheet weight ........... 440 lbs.
Maximum material thickness ..... .375"
Ram stroke ..................... 1.25"
Stripper/die clearance ......... .875"
Number of turret stations ...... 32
Tooling style .................. 114
Hit rates continuous nibbling mode 450 per min
high
300 per min low
Hit rates on 1" centers ........ 200 per min
high
180 per min low
Turret rotation ................ 30 Rpm
Turret drive Bidirectional
Approximate machine only size 236" L x 190" D
x
107" H Approximate machine only weight 35,000
lbs.
Equipped With-please verify below!
Plasma 150 cutting system
Chip Auger
Fanuc Series 00-P Talkative CNC Control
Murata Wiedemann slug conveyor
Misc. tool holders
Misc. tooling & 2-large work tables one
hyd.folding type
dust collection system
runs good...every day!
|
|
Ad # 6218 | Turret Punch Presses-CNC |
1990 |
WARNER & SWASEY WIEDEMANN |
W-4560 |
Good |
Sold |
Photo /
More Info. |
W-4560 WARNER & SWASEY WIEDEMANN WIEDEMATIC II CNC Turret punch: W-4560 WARNER & SWASEY WIEDEMANN WIEDEMATIC II CNC Turret punch. Retrofitte... |
|
Ad # 10422 | Turret Punch Presses-CNC |
1996 |
murata wiedemann |
c2000i |
Good |
SOLD |
Photo /
More Info. |
22 ton: machine has a .250 mild steel punching capacity,
sheet size is 38" x 48".
22 station turret with two auto indexing stations. comes with 112 style and 114 style tool holders, and approximately $10,000 worth of tooling |
|
Ad # 10392 | Turret Punch Presses-CNC |
1995 |
Amada |
Aries 255 |
Very Good |
sold |
Photo /
More Info. |
30 Ton: CNC Turret Punch Machine, 20 Tons Capacity,1250 x 2540mm max sheet size, 6.... |
|
Ad # 2963 | Turret Punch Presses-CNC |
1998 |
Boschert |
ELP-750-CNC-Z |
|
Sold |
Photo /
More Info. |
60 ton Boschert CNC Punching Machine, Model ELP750CNC-Z: Main Motor 7.5 HP
Max. Depth Stop Range, Y-Axis 30"
Max. Side Stop Range, X-Axis 60"
Maximum Cutting Force 60 tons
Maximum Punching Diameter 4"
Maximum Sheet Thickness 1/2"
Maximum Sheet Weight 220 lbs.
Maximum Positioning Speed 600 IPM
Working Area - Each Side 30" x 60"
Stroke Length 0" - 1.181"
Stroke Sequence 80 / 180 SPM
|
|
Ad # 11303 | Turret Punch Presses-CNC |
1986 |
Wiedemann |
Centrum 1000Q |
Needs Work |
sold |
Photo /
More Info. |
20 Station turret w/ 16.5 Tons: Wiedemann Centrum 1000Q Turret Punch
NOT Under Power
2 Cabinets Full Of Tooling & Tool Holders
general specs below-please verify
control: Fanuc 6M
16.5 tons force -10ga capacity
3" dia in .125 steel
throat: 41.3"
table travel: x-40.5" Y -40.5"
table speed: 2000IPM
table sheet capacity:40 x 40 before
repositioning
max sheet weight: 110lbs
ram stroke: 1.2"
tooling style: weidemann # 112--lots of
tooling
Punching Accuracy: +- 0.005"
turret rotation: bi-directional dc servo
process up to 5 different parts automatically
manuals included
control screen fuzzy issue
Not running - sold for parts and tooling!
TONS
of tooling! Priced to sell! Pictures of tooling:
http://atlanta.craigslist.org/atl/hvo/5215779418.
html
MUST arrange and pay for rigging.
see brochure @
http://www.sterlingmachinery.com/db-
files/Wiedemann%20Centrum%201000%20Q%20Brochure.p
d
f
Video Of Machine Running:
http://www.youtube.com/watch?v=VIhawGaHQXo |
|
Ad # 11233 | Turret Punch Presses-CNC |
1997 |
Amada |
Pega 304050 |
Very Good |
sold |
Photo /
More Info. |
30 Ton, 58 stations, FANUC Contol: Year: 1997
Accuracy (+/-) 0.005
No of stations: 58
Turret speed: 30 rpm
CONTROL: FANUC PRESS CAPACITY 3o TON TYPE OF PUNCHING FORCE HYDRAULIC X AXIS TRAVEL 50" Y AXIS TRAVEL 39.370" Strokes per minute: 350NUMBER OF TURRET STATIONS 58
|
|
Ad # 5982 | Turret Punch Presses-CNC |
1981 |
AMADA |
Coma 50-60-72 |
Very Good |
sold |
Photo /
More Info. |
50 Ton, 56 Tool Amada Coma NC Turret Punch: Control: Fanuc 200-B
Capacity
50 Ton
Sheet Size
60" x 72"(Longer Using Auto Repo)
Thickest Material
1/4" (3/8" Optional Clamping Req.)
Max. Hole Dia. In 1/4" M.S.
2 3/4"
Max. Hole Dia.
4 1/2"
Number of Stations
58 Sta. 2- Auto Index
Ram Stroke Length
1 1/4"
Strokes per Minute, Nibbling... 300
Axis Speed........................... 2000 In./Min.
Turret Speed......................... 30 R.P.M.
Hits per Minute 1" Moves....... 200
Nibbling Hits per Minute
300
Tape Format
E.I.A. or A.S.C.I.I.
Programming Mode
Absolute/Incremental
Smallest Programmable Increment.. .001"
Tape Reader................... 240 Char./Sec.
Axis Drive...................... DC Motor
Turret Drive................... DC Motor |
|
Ad # 8275 | Turret Punch Presses-CNC |
|
Di-Acro |
VT-36 |
Good |
sold |
Photo /
More Info. |
Di-Acro VT-36 Mechanical Turret Punch: Di-Acro VT-36 Turret Punch
This Machine Is Under power In Our Shop
Has a tape bypass, so you can load programs by 3 1/2" Floppy Disk
Assorted Tooling & Tool Holders Included
1" stroke
Has Manuals
|
|
Ad # 12051 | Turret Punch Presses-CNC |
1984 |
Amada |
344Pega queen |
Excellent |
sold |
Photo /
More Info. |
30 ton 40" x 40": Specifications:
· Model: 344Q PEGA
· Year: 1984
· Capacity: 30 ton
· Sheet size: 40" x 40"
· Thickest material: 1/4" m.s.
· Max. Hole dia: 4 1/2"
· Number of stations: 58 (with 2 auto index stations)
· Strokes per minute: 350
· Axis speed: 2000 i.p.m.
· Turret rotation: 30 r.p.m.
· Hits per minute 1" moves: 220
· Nibbling hits per minute: 350
· Standard control: Fanuc 6m
· Main motor: 5 hp 220/3/60 volts
· Machine weight: 22,500 lbs.
|
|
Ad # 5709 | Turret Punch Presses-CNC |
|
Amada |
Pega King |
Very Good |
SOLD |
Photo /
More Info. |
33 TON, 58 STATION AMADA PEGA KING with 40" x 50" TABLE: NOTE!!! TWO MACHINES AVAILABLE
33 Tons
40" X 50" Table
Repositioning
58 Station
2 Auto Index Stations
475 Strokes Per Minute
Fanuc 6M Control
Pnematic Clutch & Brake
100's of pieces of tooling, guide sets and cabinets included
One of the machines has a Turbo Chip Conveyor
Model No. 6398-8005 Serial No. 310409
|
|
Ad # 9201 | Turret Punch Presses-CNC |
1993 |
Strippit |
FC1000R -Fabri-center |
Very Good |
sold |
Photo /
More Info. |
Fabri center-20 ton: Please verify std. specs below
TOOLING: 20 STATION STRIPPIT STYLE THIN
AUTO INDEX: 3
THICKNESS: .250 MILD STEEL
CAPACITY: 23 TONS .250" MILD STEEL - 1.169" DIA.
.074" MILD STEEL - 3.500" DIA
GAGE POSITIONING ACCURACY: +-.004
AXIS TRAVEL: 51.2" x 40.37"
NOMINAL WORKPIECE SIZE: 49.2" x 39.37"
RECOMMENDED MAXIMUM: 98.4 x 78.74" NOTE: REQUIRES PROGRESSIVE MOVE, SHEET FLIP
AND ADDITIONAL SHEET SUPPORT
MAXIMUM WORKPIECE WEIGHT: 205 Lbs.
TRAVERSE SPEED: 2000 IPM
3 AUTO INDEX STATIONS
CONTROL: STRIPPIT PC CONTROL--MAC
HYDRAULIC CLUTCH AND BRAKE
Has Manuals..
APPROX DIMENSIONS 157"L x 140" W x 87" High
APPROX WEIGHT 25,000 LBS
|
|
Ad # 11856 | Turret Punch Presses-CNC |
2002 |
Trumpf |
Trumatic TC6000L |
Excellent |
SOLD |
Photo /
More Info. |
COMBO LASER/PUNCH: Trumatic 6000L
(COMBINATION LASER/PUNCH)
TLF 3200 Watt Laser
AutoLas Plus
Addl Cutting Head
ASC-Advance Stripper Control
Multitool Drive
Tapping Drive
High Speed Marking
Soft Punch
Pneumatic Repositioning Cylinders
Automatic Slug Conveyer
SheetMaster 1600
ITM-Intelligent Tool Manager
18 GFP Tool Cartridges & Die Plates
(2) Tapping Tools
Beam on 2310 hours
Laser on 15,414 hours
Machine on 15,486.7 hours |
|
Ad # 11830 | Turret Punch Presses-CNC |
1978 |
Strippit |
FC1000 |
Good |
sold |
Photo /
More Info. |
30: Strippit Turret punch FC1000 in Missouri that i pulled out of Houston TX Un... |
|