| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 14942 | Horizontal and Vertical Hones |
| 197? |
Superior Hone |
HM |
Good |
sold |
Photo /
More Info. |
| Work Capacity w/Proper Tooling 3”: Superior hydraulic Hone #HM
S/N #2200-B-1911
3/4HP
#HM SUPERIOR HORIZONTAL HYDRAULIC HONE
197?, Serial No 2200-214, Model HM
EQUIPPED WITH:
Foot Treadle
Self Contained Hydraulic System
Single Control Sizing Dial
Infinitely Variable Speed Spindle
Tachometer
Coolant System
CATALOGUE SPECIFICATIONS:
Work Capacity w/Proper Tooling 3”
Stone Pressure, Maximum 200 LBS
Stone Pressure, Recommended 60 to 90 LBS
Spindle Speeds, Infinitely Variable 225 to
1700 RPM
Spindle Drive Motor, Horsepower 0.75 HP
Hydraulic Motor, Horsepower 0.33 HP
Electrical System 220-440/3/60
Overall Dimensions, W x D 3’1” x 2’10”
Overall Height 4’9”
Weight, Approximately 950 LBS
NOTE: includes a wood box of tooling-not
shown...Tooling Can Be Procured From Superior
Honing Equipment, Sarasota, Florida.
|
|
| Ad # 12983 | Horizontal and Vertical Hones |
| 1965 |
Superior |
J2 |
Good |
sold |
Photo /
More Info. |
| Spindle Speeds - 225-525 RPMs: 1965 Superior Hone
Model J2
Spindle Speeds - 225-525 RPMs
Voltage: 115 Single Phase 60 Cycle
Coolant Pump Motor 1/25 H.P.-1500 RPM
Spindle Motor 1/2 H.P.-1725 RPM
Service Light
Infinitely Variable Spindle Speeds From 225-525
RPMs
Complete Drive,Motor And Coolant Tank Enclosed In
Base
Coolant Pump-Centrifical With Seperate Switch
Speed Indicator For Accurate Speed Settings
Coolant Tank Is Removeable For Easy Cleaning
14 Gallon Capacity
Use Superior Honing Oil #560 Or Equivalant
no tooling |
|
| Ad # 2198 | Horizontal and Vertical Hones |
| 80's? |
Sunnen |
MBC-1804-D |
Very Good |
Sold |
Photo /
More Info. |
| Automatic Power stroker hone: Automatic sizing control shut off feature
range: 1/16 to 6.5", 0.060-3.75 automatic, larger manual
power stroke
manuals,
no tooling
checking probe included
|
|
| Ad # 1445 | Horizontal and Vertical Hones |
| 1997 |
KADIA |
2VZH90350R |
Excellent |
Sold |
Photo /
More Info. |
| CNC Twin Spindle Hone with 4 Station Work Switcher: High production -High volume hone
new in 1997, used only 4 years
German Built
Twin honing spindles, independently controlled.
Auto Diameter adjustment
4 station work Switcher:
1) Load/unload
2) De-burring Station (Brush and flush)
3) Rough Hone
4) Finish Hone
Control" Unipos 470
stroke 350MM =approx 14"
Stroke Speed; 25 meters/min (1,000"/min)
Hoffman Paper Filter System
Full documentation (In English)
Includes some misc hones ranging from 1.11" in diameter up to 1.562" in diameter, but with proper tooling can hone a wider range of sizes
Dimensions:for Shipping
Computer controller- 21 in x 48 in 7 ft tall
Hone main machine:56 inches x 56 inches x 12 ft tall
Hyd. unit:38in x 60in 5ft tall
Filter system for hone oil:49in x 8ft x 5ft tall
|
|
| Ad # 5390 | Horizontal and Vertical Hones |
| — |
SUNNEN |
LBB 1810 |
Very Good |
Sold |
Photo /
More Info. |
| SUNNEN HONE with AG-300 Precision Gaging: — |
|
| Ad # 9733 | Horizontal and Vertical Hones |
| 83? |
sunnen |
LBB-1810 |
Very Good |
Sold |
Photo /
More Info. |
| Horizontal -power stroker: power stroker feature
Ag-300 gages
lots of tooling
Max stroke-16"
Diameter range -0.059-3.75
|
|
| Ad # 7914 | Horizontal and Vertical Hones |
| 1981 |
Sunnen |
MBB 1650 |
Excellent |
Sold |
Photo /
More Info. |
| Sunnen Model MBB Horizontal Honing Machine, 1/8"-1" capacity: Sunnen Model MBB 1650 Horizontal Honing Machine, 1/8"-1" capacity, .0001" t... |
|
| Ad # 2044 | Horizontal and Vertical Hones |
| 1978 |
Nagel |
VS8-50LM |
Good |
SOLD |
Photo /
More Info. |
| Nagel Production Hone: Honing Ø: – 120 mm
Honing depth: 450 mm
Max. spindle stroke: 500 mm
Table size: 500 x 1,100 mm
Table adjustment, longitudinal / cross: 300 / 150 mm
Spindle speeds, infinitely variable:100 – 400 rpm (drive)
Stroke speed, infinitely variable: 0 – 25 m/min
Spindle drive: 4 kW
Total electrical load: 8 kW – 380 V – 50 Hz
Weight: 3,000 kg
Height of machine, approx.: 4,000 mm
Aceccories / Special Features
* Selection switch for normal honing, pre-honing, finish
honing, and short honing stroke in upper and lower position.
* Automatic hydraulic expansion of honing head.
* Timer for presetting the honing times for pre-honing and
finish-honing.
* Display for speeds.
Condition : Good.
|
|
| Ad # 12658 | Horizontal and Vertical Hones |
| — |
Sunnen |
MBB 1660 |
Good |
sold |
Photo /
More Info. |
| —: I.D. RANGE:
0.600" (1.5mm) up to 6.5" (165mm)
LENGTH RANGE:
BORES UP TO 16" (400MM), DEPENDING ON BORE
DIAMETER
SPINDLE SPEEDS:
200, 250, 320, 400, 500, 640, 800, 1000, 1270,
1600, 2000, 2500 RPM
SPINDLE MOTOR: 1/2 HP
SPINDLE BRAKE: STANDARD
HONING OIL PUMP: UTILIZES SPINDLE DRIVE MOTOR
HONING OIL CAPACITY: 16 GAL.
ELECTRICAL SYSTEM:
115/230V, 1-PHASE, 60-CYCLE
FLOOR SPACE: 30" WIDE x 30" DEEP x 63" HIGH
WEIGHT (WITH HONING OIL): 630 LBS (287 KG)
MACHINE
ONLY
|
|
| Ad # 6631 | Horizontal and Vertical Hones |
| 1991 |
BARNES |
5E |
Excellent |
sold |
Photo /
More Info. |
| HYDRAULIC HORIZONTAL EXTERNAL HONING MACHINE: BARNES MODEL 5E HYDRAULIC HORIZONTAL
---EXTERNAL HONING MACHINE-- ONLY
SWING: NOT LESS THAN 12" DIAMETER
HONING CAPACITY: UP TO 6" DIAMETER
LENGTH OF STROKE, ADJUSTABLE (CARRIAGE TRAVEL):
2" - 12'
RATE OF CARRIAGE TRAVEL: 10 - 100 FPM
SPINDLE SPEEDS (VAR): 50 TO 473 RPM
CAPACITY BETWEEN CENTERS: 2' - 12'
SPINDLE TAPER: NO. 5 MT
RESERVOIR CAPACITY: 80 GALLONS MINIMUM
100 GALLONS MAXIMUM
MOTORS: 15 HP MAIN DRIVE
15 HP HYDRAULIC
3/4 HP COOLANT PUMP
EQUIPPED WITH:
OPERATOR CONTROL STATION
COOLANT SYSTEM WITH MAGNETIC & FABRIC FILTRATION
OAD: 248: L-R X 66" F-B X 61" HIGH - MACHINE
93" L-R X 16" F-B X 75" HIGH - ELECTRICAL CABINET
71" L-R X32" F-B X 68" HIGH - HYDRAULIC UNIT
77" L-R X 57" F-B X 70" HIGH - COOLANT/FILTRATION UNIT
NOTE - MACHINE IS IN EXCELLENT CONDIJTION. FROM U.S. GOVERNMENT RESERVE. |
|
| Ad # 6632 | Horizontal and Vertical Hones |
| — |
SUPERIOR |
3VB/HD-10 |
Very Good |
SOLD |
Photo /
More Info. |
| SUPERIOR MODEL 3VB/HD-10 VERTICAL HONE: SUPERIOR MODEL 3VB/HD-10 VERTICAL HONE
HEAVY DUTY
FULLY AUTOMATIC OPERATION AFTER INITIAL SET-UP
DIAMETER CAPACITY: UP TO 10"
LENGTH CAPACITY: 36"
STROKE: 60"
TABLE SIZE: 18" X 24"
DISTANCE, FLOOR TO TABLE TOP: 8"
MOTOR: 3 HP
EQUIPPED WITH:
FREE STANDING HYDRAULIC POWER UNIT
DWELL/CYCLE TIMER
STOP FEED (EXPANSION) SPARKOUT SYSTEM
AUTO SIZING
CONTROL CONSULE
8" 3-JAW CHUCK
24" EXTENSION WORK TABLE
OAD: 54" L-R X 57" F-B X 124" HIGH - MACHINE
28" L-R X 18" F-B X 31" HIGH - HYDRUALIC UNIT
36" L-R X 24" F-B X 56" HIGH - CONTROL CABINET |
|
| Ad # 6592 | Horizontal and Vertical Hones |
| — |
Sunnen |
MBB-1290-D |
Very Good |
Sold |
Photo /
More Info. |
| Sunnen Hone :Horizontal, BB-1290-D Hone, with Lots of Tooling: Model # MBB-1290-D
Spindle Speeds: 300-450 and 650-800 rpm
Work Light
Tooling: Cabinet (included) full of tool holders (approx: 15), honing stones and other tooling items.
Many of these items are new.
Example: One 4" hone sells for about $900.00 today |
|
| Ad # 1989 | Horizontal and Vertical Hones |
| — |
Sunnen |
MBB 1600 JIC |
Fair |
Sold |
No Photo /
More Info. |
| Sunnen Hone: — |
|
| Ad # 15587 | Horizontal and Vertical Hones |
| 2010? |
Sunnen |
MBB-1660-E |
Good |
sold |
Photo /
More Info. |
| —: USED "SUNNEN" PRECISION HONING MACHINE
I.D. RANGE 0.060" to 6.500" (1.50 to 165mm)
LENGTH RANGE UP TO 16” (400mm) DEPENDING ON
DIAMETER
SPINDLE SPEEDS (12) 200 to 2,500 RPM
HONING OIL CAPACITY 16 GALLONS
MOTOR 1/2 HP/208-230-460/3/60
EQUIPPED WITH:
USED "SUNNEN" POWER FILTRATION SYSTEM
MODEL PF-150
SERIAL # 10231
MOTOR 1/2 HP |
|
| Ad # 5192 | Horizontal and Vertical Hones |
| — |
Sunnen |
MBB-1680-C |
Good |
sold |
Photo /
More Info. |
| Sunnen Hone: Power troke option
manuals
box of tooling |
|
| Ad # 6581 | Horizontal and Vertical Hones |
| — |
Micromatic |
MDL 740 |
Very Good |
SOLD |
Photo /
More Info. |
| Model 740 Micromatic Vertical Hone: Just Listed - Specs to come
Tool Holder to Table: 52"
|
|
| Ad # 12616 | Horizontal and Vertical Hones |
| — |
Sunnen |
MBB 1290-D |
Good |
sold |
Photo /
More Info. |
| —: Good condition. pictures available, please email us at telesonics@yahoo.com... |
|
| Ad # 12520 | Horizontal and Vertical Hones |
| 2009 |
MONNIER & ZAHNER |
M641 |
Excellent |
sold |
Photo /
More Info. |
| —: This is a 2009 Monnier & Zahner M641 4-axis CNC
honing machine Dimensions 1800 x 1700 x 1730 mm
(width/depth/height), Weight: 1750 kg,
* Currently available *
* Buyer responsible for freight & rigging. *
* Unit is located in Tennessee, USA * |
|
| Ad # 8575 | Horizontal and Vertical Hones |
| 1986 |
Sunnen |
AH300 |
Good |
SOLD |
No Photo /
More Info. |
| Sunnen: Good machine works well.
Lots of Dimond tools from Sunnen.
Some NEW some used.
Diffrent sizes |
|
| Ad # 7733 | Horizontal and Vertical Hones |
| 1999 |
Sunnen |
MBB-1660 |
Excellent |
SOLD |
Photo /
More Info. |
| Sunnen Precision Hone Model MBB-1660: Sunnen precision hone model MBB-1660, without hones but includes square hon... |
|
| Ad # 12429 | Horizontal and Vertical Hones |
| — |
Sunnen |
MA |
Good |
sold |
Photo /
More Info. |
| 2" 1/2": Sunnen MA
Voltage 220/3 Phase
SPECIFICATIONS
SPINDLE SPEEDS ----------------------- 250,410,600,820 RPM
MANDREL DIA. MIN/MAX ----------------- .185"/2.625"
MOTOR -------------------------------- 1/3 HP., 3 PHASE
MOTOR (RPM) -------------------------- 1,725 RPM
|
|
| Ad # 1013 | Horizontal and Vertical Hones |
| — |
Sunnen |
MBB1680-C |
Fair |
sold |
Photo /
More Info. |
| Sunnen Hone-Power Stroke type: power stroke option included;
needs minor work-new drive belt;
no tooling included |
|
| Ad # 10238 | Horizontal and Vertical Hones |
| 2007 |
SUNNEN |
LBB-1660 |
Excellent |
Sold |
Photo /
More Info. |
| SUNNEN HONING MACHINE: DIAMETER RANGE (ID)
manuel stroking: .370 - 4.700 in.
Workpiece Weight: 6 lbs.
Stroke Length Range: Up to 16 in.
Spindle Speeds: 200 to 640 rpm.
Spindle Motor: 1/2 hp
Coolant Pump: Centrifugal pump driven off spindle motor.
Coolant Capacity: 16 gallons
Coolant Requirements: Sunnen Industrial Honing Fluids
Floor Space: 60" D x 32" W x 63" H
Floor Weight: 630 lbs
Floor Load: 151 lbs/sq ft
Electrical Requirements: 110/230V,60Hz,1Ph
220/380/440V,50Hz,3Ph |
|
| Ad # 12050 | Horizontal and Vertical Hones |
| 2007 |
Sunnen |
VSS 84E-S26 |
Good |
sold |
Photo /
More Info. |
| SUNNEN VSS 84E Hone:Diameter range 5.92 mm – 19 mm: Attached please find photos of the Sunnen VSS 84E, New 2007
4 spindles, 8 work stations
Diameter range 5.92 mm – 19 mm
Max work height 150 mm
Max workpiece size 150 mm cube
Spindle motor 10 HP
Spindle speeds 100 – 2500 RPM
Stroking speed 250 – 6350 mm/min
Stroke travel 400 mm
Floor space 2.3m x 1.9m x 2.4m
Approx weight 1650 kgs
The hone has less than 200 hours.
SPECIFICATIONS:additional specs-verify
DIAMETER RANGE (ID):.................................... 5.92 - 19.00 mm (0.233-0.748")
WORKPIECE
MAXIMUM HEIGHT:.......................................... 150 mm (5.9")
MAXIMUM SIZE:................................................ 150 x 150 x 150 mm (6 x 6 x 6")
SPINDLE
SPINDLE PSEED RANGE:.................................. 100 TO 2500 RPM
SPINDLE MOTOR:.............................................. 10 HP
STROKING (BALL SCREW DRIVE)
SPEED RANGE:................................................... 250 to 6350 mm/min (10-250 IPM)
VERTICAL TRAVEL:.......................................... 400 mm (15.7")
INDEXING TABLE
WORKPIECE & FIXTURE MAX. WEIGHT:.......... 113 KG (250 LBS)
COOLANT SYSTEM CONNECTION
SUPPLY PORT:...................................................... HOSE BARB FOR 25 mm (1") ID HOSE
RETURN PORT:..................................................... HOSE BARB FOR 51 mm (2") ID HOSE
ELECTRICS
REQUIREMENTS:.................................................. 440/460 V,50/60 HZ, 35/30 A
CONTROL:............................................................. INDUSTRIAL EMBEDDED PC
TEMPERATURE RANGE:...................................... 0 DEGREES TO 35 DEGREES C (32- 95 DEGREES F)
FLOOR SPACE:...................................................... 2348 H x 2248 W x 1886 D (92" x 89" x 74")
WEIGHT:................................................................. APPROX. 3,550 LBS.
EQUIPPED WITH:
"COSEMA" COOLANT SYSTEM WITH FILTRATION
USED FOR TWO TO THREE WEEKS FOR ONE JOB,
THEN NEVER USED AGAIN
|
|
| Ad # 10181 | Horizontal and Vertical Hones |
| ?? |
Sunnen |
MBB1290B |
Good |
SOLD |
Photo /
More Info. |
| —: rpm: 300,450,650,800 |
|
| Ad # 11999 | Horizontal and Vertical Hones |
| — |
Sunnen |
LB1499 |
Good |
sold |
Photo /
More Info. |
| —: Sunnen LB 1499 hone
W/ AG 300 test gage # 10233
cast base
no tooling |
|
| Ad # 16005 | Horizontal and Vertical Hones |
| — |
Superior |
— |
Excellent |
sold |
Photo /
More Info. |
| —: Over the years we noticed that we needed to
size holes accurately for various reasons and
so we put together this honing station
utilizing Superior Hone components
(Manutactured today by Tennessee Abrasives).
The station consists of: floor model drill
press wired thru a foot switch (so we could
hold on to the parts with both hands and cycle
the drill press on and off) and a reverse
switch (so we could not only expand the size of
the hones, but reduce them also) New $900-
1200
a complete Model TRK-1000 honing kit with
mandrels, stones, and a morse taper mandrel
driver. New cost on this is $1900 today
an additional straight shank mandrel driver if
you wanted to install it in a bridgeport or
other machine, new cost $600
50 Mandrels total to about 3 inch diameter
estimated new cost about $3500
222 sets of stones + or - some used, many new
with a replacement cost of about $3000
30 truing sleeves with a replacement cost of
$480 |
|
| Ad # 9233 | Horizontal and Vertical Hones |
| 2006 |
Sunnen |
VSS-64-E -S17 |
Excellent |
Sold |
Photo /
More Info. |
| Vertical Single Stroke Honing® System Cap: dia 0.23-.748: Vertical Single Stroke Honing® System
GENERAL INFORMATION & SPECIFICATIONS-please verify below
VSS™-64
6 STATIONS - 4 SPINDLES
Sunnen® Vertical Single Stroke Honing® System
Diameter Range (ID):1 5,92-19,00 mm (0.233-0.748 in)
For diameters above or below stated range, call Sunnen in St. Louis.
Workpiece2 -
Maximum Height: 150 mm (5.9 in)
Maximum Weight: (See Indexing Table below)
Maximum Size: 150 x150 x 150 mm (6 x 6 x 6 in)
For larger sizes, call Sunnen in St. Louis.
Spindle -
Spindle Speed Range: 100 to 2500 rpm
Spindle Motor: 10 Hp
Stroking (Ball Screw Drive) -
Speed Range: 250 to 6350 mm/min (10 to 250 IPM)
Vertical Travel: 400 mm (15.7 in)
Indexing Table -
Workpiece & Fixture Weight: Maximum total workpiece & fixture weight that may be
used on the index table is 113 kg (250 lbs).
Coolant System Connection3 -
Supply Port: Hose Barb for 25mm (1in.) ID Hose
Return Port: Hose Barb for 51mm (2in.) ID Hose
Electrical System -
Electrical Requirements: 440/460 V, 50/60 Hz, 35/30 A
Control: Industrial Embedded PC
Temperature Range: 0° to 35° C (32° - 95° F) (Optional cooling unit is available).
Floor Requirement (Concrete): 150 mm (6 in.) minimum thickness
Floorspace (Machine Only): 2290 W x 1525mm L (90 x 60 in.)
1 Diameter range, length range, and workpiece weight are contingent on workpiece and application.
2 Stroke length & workpiece weight is contingent on machine configuration and application.
3 Machine not supplied with Coolant System. Call Sunnen Product Co. in St. Louis.
4 head 6 station
mag seperator and paper filter-Euro quadri
floating fixtures
great production machine |
|
| Ad # 13796 | Horizontal and Vertical Hones |
| — |
Sunnen |
CK10 |
Good |
sold |
Photo /
More Info. |
| —: Sunnen CK-10 cylinder resizing hone machine
has phase converter to run on 220/1 phase included
standard and midget heads with all shims and stone holders ,stone and guide setters ,stone inserter ,lots of honing stones ,rotary phase converter ,small cylinder holder and everything to install a V8 or inline motor ... the machine is in great working condition never had a problem with , used it for the last 15 years only on weeknights as a second job , did about 20-25 blocks per year , this machine was never used for production |
|
| Ad # 10064 | Horizontal and Vertical Hones |
| ?? |
Sunnen |
LBB-1699 |
Very Good |
sold |
Photo /
More Info. |
| Rod Hone: rod gage included
lots of tooling with seperate cabinet |
|
| Ad # 15467 | Horizontal and Vertical Hones |
| ? |
Sunnen |
MBB 1290 D |
Good |
sold |
Photo /
More Info. |
| Honing Diameter .120" x 6": Precision Horizontal Honing Machine
Make: Sunnen
Model: MBB 1290 D
Capacity: 6"
Electrical: 110/1 phase
Honing Diameter .120" x 6"
Maximum Hone Length 16"
Honing Speeds 300, 450, 650, AND 800
Stroke Speeds 80, 110, 160, 220, 310 STROKES
PER MINUTE
Oil Tank Capacity 12 Gal
no tooling included or mandrels |
|
| Ad # 7149 | Horizontal and Vertical Hones |
| — |
Sunnen |
MBB-1600 |
Very Good |
Sold |
Photo /
More Info. |
| Sunnen MBB 1600 Horizontal Hone : Honing spindle speeds--number 12
--range 200 to 1600 rpm
I.D. range .060 to 6"
Length range 1/8" to 18"
Spindle motor 1/2 HP
Oil reservoir capacity 12 gallons
Takes D6 and D8 Mandrils
Min. Radial Increase: 0.0003 steps
EQUIPPED WITH:
Honing dial
PF-150 filter
Assorted tooling
Coolant system
Worklight
|
|
| Ad # 9168 | Horizontal and Vertical Hones |
| 2006 |
Sunnen |
EC3500 /Eclipse |
Very Good |
Sold |
Photo /
More Info. |
| EC-3500Eclipse:0.060 to 6.5 auto cycle/sizing,pwr stroking,200-3k RPM,: EC-3500 Eclipse Series,
auto cycle/sizing,
pwr stroking,
200-3000 RPM,
0.60 to 6.6 inch capacity
Std. catalog specs below -please verify before purchase
SPECIFICATIONS:
Boring Diameter - Manual Stroking .060" - 6.50"
- Power Stroking .060" - 4.00"
Automatic Sizing .125" - 2.00"
Spindle Speeds Adjustable in Fine Increments 200 - 3000 RPM
Stroke Rates Adjustable in Fine Increments 60 - 500 RPM
Stroke Length .236" - 6.70"
Stroker Motor 1.5 HP
Honing Oil Pump Motor 1/4 HP
Coolant Pump 1-1/2 GPM
Coolant Capacity 32 Gallons
Spindle Motor 5.5 HP
Electrics 220V/3/60
Pneumatics Required 80 PSI
Floor Space Required 64" x 44"
Dry Weight 1,600 Lbs.
EQUIPPED WITH:
Auto Stone Wear Compensation
Automatic Sizing Control
Auomatic Sizing Control Probe ( ASC Probing )
Universal Workholding Fixture
Detachable Coolant Cart
Foot Pedal Control
No tooling included
|
|
| Ad # 9143 | Horizontal and Vertical Hones |
| 89?? |
Sunnen |
EC-3500 |
Very Good |
Sold |
Photo /
More Info. |
| Sunnen Automatic Hone 6.5 in programmable: Used Sunnen Model EC-3500,
Manual Stroking: .060-6.5"
Power Stroking: .060-4"
INTERNAL WORK DIA. RANGE, MANUAL.............. .060" TO 6.5"
INTERNAL WORK DIA. RANGE WITH POWER STROKING.... .060" TO 4"
AUTOMATIC SIZING................................ .125" TO 2"
STROKE LENGTH.................................. .236 T0 6.7"
SPINDLE SPEEDS, ADJUSTABLE IN FINE INCREMENTS. 200-3,000 RPM
STROKE RATE, ADJUSTABLE IN FINE INCREMENTS....... 60-500 SPM
COOLANT CAPACITY ................................ 32 GALLONS
APPROX. MACHINE WEIGHT .......................... 1,875 LBS.
EQUIPPED WITH:
ELECTRONIC CONTROL SYSTEM
AUTO CYCLE FEATURING
AUTO POWER STROKING
STONE SAVER
AUTO SIZING CAPABILITY
AUTO SHUT-OFF
DETACHABLE COOLANT CART
5.5 HP, 3/60/230-460 VOLT SPINDLE DRIVE MOTOR
Automatic Stroking: .125-2"
Stroke Length: .236-6.7"
Spindle Speeds: 200-3000 RPM adjustable in fine increments
5.5 H.P. 3 Phase/60/230-460 Volts
32 Gallon Coolant Tank
Includes manuals & some tooling
|
|
| Ad # 1641 | Horizontal and Vertical Hones |
| 1979 |
Barnes |
244 |
Good |
Sold |
Photo /
More Info. |
| Barnes VERTICAL Hone - 7" dia x 25" Capacity: HONES, VERTICAL
Capacity:
Maximum Honing Diameter 7 "
Stroke 25 "
Motor: Main Motor 5 hp
Equipped With:
Auto Expansion
Auto Size Control(Plugmatic)
Banes Filter Bed w/Magnetic Separator
7" Diameter Honing Tool
Guide Bushing & Sizing Plug
|
|
