Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 2295 | Wire EDM Machines |
1984 |
Japax/Bridgeport |
LU3B |
Fair |
SOLD |
Photo /
More Info. |
Wire EDM W/ hole drill attachment: Control: JAPT-3F
14 x 10" travels
25AMP-200volts max.
RS232 Comm port box # VH02
Super drill attachment # SD-1
remote pendant
filter system# PN20x
|
|
Ad # 14896 | Wire EDM Machines |
1997? |
Sodick |
A320D |
Good |
Sold |
Photo /
More Info. |
: Model: A320D
Control: Sodick EX-21
Machine Type: Wire EDM
Year: 1997
Maximum Workpiece Size: 15.7″ x 11.8″ x 6.8″
Maximum Table Load (non-submerged): 771 Lbs
Maximum Table Load (submerged): 551 Lbs
Travels:
X-Logitudinal: 12.5″
Y-Cross: 8.0″
Z-Vertical: 6.88″
Taper:
U & V Axis: 2″ / 2″
Cut Gradient: ±10° per 3.93″
Tank: Inner Dimensions: 30.8″ x 23.7″ x 16″
Wire: Wire Diameter Range: 0.004″ 0.012″
Machine: Weight: 4,400 Lbs
|
|
Ad # 9816 | Wire EDM Machines |
1990 |
Mitsubishi |
DWC-90SB |
Good |
Sold |
Photo /
More Info. |
: includes
chiller
filter system
manuals
wire threader needs some work, must manually thread wire..
no wire chopper
MITSUBISHI MODEL DWC-90SB WIRE EDM
EQUIPPED WITH:verify ??
"B" Series Controller, w/12 Mono CRT,MDI,RS232,Tape and 3.5 Floppy Drive
Dielectric Reservoir
Controlled Axis----Four simultaneous (X,Y,U,V)
CATALOGUE SPECIFICATIONS:
Max Workpiece-----------17.7" x 13.7 x 6.6 H
Max Work Weight---------264 lbs.
Table Dimensions--------19.2 x 20.8
Machine Range-----------9.84 x 11.81
Rapid Rate--------------33.5 IPM
Wire Diameter----------.004 to .012
Max Wire Feed Speed-----9.84 IPM
Max Taper Angle--------- /- 12 deg.
Dist Lower Bed - Upper Worktable --33.4"
Dimensions, Approx-Control ---28 x 70 x 65H
Machine-----55 x 46 x 73H
Reservoir-- 42 x 26x 41H
Weight, Approx--Control----- 660lbs
Machine --- 3,960 lbs.
Reservoir-- 375 lbs. (dry)
|
|
Ad # 11717 | Wire EDM Machines |
1997 |
Mitsubishi |
FX-20 |
Very Good |
sold |
Photo /
More Info. |
Mitsubishi FX-20: Has 2 extra resin towers and 2 extra Ebbco filter towers. Also has 20kg wir... |
|
Ad # 12863 | Wire EDM Machines |
1995 |
Agie 350 |
350 HSS |
Excellent |
sold |
Photo /
More Info. |
x:27.5 y:15.7 z:15.7: 1995 Agie 350 HSS: used edm
x:27.5 y:15.7 z:15.7 travels
xtra large tank size submersed cutting with
automatic wire
threading.
Less than 4,000 cutting hours.
(Qualified) refurbished
ready to go!!!!!!!! |
|
Ad # 6931 | Wire EDM Machines |
1997 |
MITSUBISHI |
FX20 |
Excellent |
sold |
Photo /
More Info. |
MITSUBISHI MODEL FX20 CNC WIRE-CUT EDM: MITSUBISHI MODEL FX20 CNC WIRE-CUT EDM
Maximum Workpiece Dimensions: 43.3" x 31.5" x 11.6"
Maximum Workpiece Weight: 1765 Lbs
Maximum Workpiece Thickness: 9.84"
Minimum Hole Diameter: .019"
Wire Diameter: .0078" - .011"
Table Size: 30.7" x 24.8"
Table Height: 35.43"
X-Axis Travel: 19.69"
Y-Axis Travel: 13.77"
Z-Axis Travel: 11.81"
U & V - Axis: +/- 1.25"
Maximum Taper Angle: 15 Degree
Table Rapid Speed: 51.18 IPM
Dielectric Tank Capacity: 168 Gal.
EQUIPPED WITH:
Mitsubishi W11FX 32-Bit CNC Control
Automatic Threading
Remote Hand Control
Mitsubishi Chiller |
|
Ad # 11702 | Wire EDM Machines |
1996 |
Charmilles |
Robofil 2020-1 |
Good |
sold |
Photo /
More Info. |
Travels:X-11.8",Y=9.8",Z=9.8": Used 1996 Charmilles Robofil 2020 Wire EDM
Travels:X-11.8",Y=9.8",Z=9.8"
table size: 15.6 x 11.8"
part weight max: 440lbs
Resolution: 1um
max speed : 15mm/s
work tank fluid: 551L
filter system 3 cartridges
Includes transformer for 460/3 from std(factory)
machine voltage of 400 vac/3
no chiller
Std Specs below-please verify below:
TRAVELS:
X AXIS .............................. 11.8"
Y AXIS .............................. 9.8"
Z AXIS .............................. 9.8"
WORKTABLE ........................... 15.7" x
11.8"
MAX. DISTANCE FROM TABLE SURFACE SPINDLE NOSE
USING MECATOOL TOOLING:............ 15.6"
MAX. WEIGHT OF ELECTRODES:........... 55 Lbs.
C-AXIS MOVEMENT ..................... 360 Degrees
ROTARY SHAFT SPEED .................. 20 RPM
MAX. MANUAL SPEED ................... 15mm/s
WORKTANK EFFECTIVE DIMS. ............ 23.8" x
15.7" x 7.2"H
MAX. WORKPIECE WEIGHT ............... 440 LBS.
MINIMUM COMMAND UNIT ................ 0.00004"
RESEVOIR DIMENSIONS .............. 38.5" x 29.6"
x 20.9"H
DIELECTRIC FLUID RES. ............ 200 LITERS
FILTERING PRECISION .............. 3 CARTRIDGES
MACHINE TOOL DIMS:................ 50" L-R, 47" D
X 93"H
APPROX. MACHINE WEIGHT ........... 1,870 LBS.
CNC CONTROL CABINET DIMS:......... 26" x 24" x
76"H
FEATURES:
CHARMILLES CNC CONTROL & POWER SUPPLY
4 AXIS CNC CONTROL (X/Y/Z/C)
14" COLOR CRT DISPLAY
RS232C INTERFACE
All manuals included plus maint records
Some Tooling & Acc Included
Machine was in a clean room environment before
being moved , but was moved and hooked up to power
but never used...
This is a great machine ready to go...wont find
one better for the money!!!! |
|
Ad # 6700 | Wire EDM Machines |
1990 |
SODICK |
A280L |
Excellent |
Sold |
Photo /
More Info. |
SODICK A280L CNC Wire Cut EDM Machine: SODICK A280L CNC Wire Cut EDM Machine
Table x-axis travel 11.8
Table y-axis travel 7.8
Quill travel-z-axis 6.9
Auxiliary table travel(uv axis) 2.0 x 2.0
Max. work piece dimensions 15.7 x 11.8 x 6.9
Max. work piece height at submerged cutting 5.9
Max. work piece weight 352 lbs
Wire diameter 0.1-0.3 mm.
Wire capability Standard 3Kg.
Wire feed speed (max.) 250 mm/sec.
Wire tension 0.2-2.8 Kgf
Taper cut gradient ± 10° in 100mm thickness
Height, floor to work table surface 35.8
Max. cutting speed 15 inch 2/h.
Capacity of dielectric tank 75 gal.
EQUIPPED WITH:
Submersible tank
Automatic wire threading
10 KVA power source
MARK-EX NC power supply unit
Dielectric system with paper filter |
|
Ad # 12714 | Wire EDM Machines |
1989 |
Sodick |
Mark iiiv |
Good |
sold |
Photo /
More Info. |
24 x 18 x 6: 24 x 18 x 6 |
|
Ad # 7905 | Wire EDM Machines |
1992 |
Sodick |
A320S |
Good |
Sold |
No Photo /
More Info. |
12.59" x 7.88 x 6.88" Sodick A320S Wire EDM: SODICK CNC WIRE EDM MACHINE MODEL: A320
SPECIFICATIONS: X-AXIS TRAVEL ......................... 12.59" Y-AXIS TRAVEL ......................... 7.88" Z-AXIS TRAVEL ......................... 6.88" AUXILIARY AXES (U & V) ................ 1.96" x 1.96" TABLE ANGLE ........................... +/- 15 DEG. MAX. WORKPIECE DIMENSIONS ............. 16.5"W x 11.8"D x 6.7"H DISTANCE FLOOR TO TABLE TOP ........... 35.83" WIRE TENSION .......................... 0.44 TO 6.16 WIRE DIAMETER ......................... 0.010 TO .012 MACHINE DIMENSIONS W/TANK & CHILLER ... 67" x 72" x 71" TOTAL WEIGHT .......................... 4,800 LBS.
EQUIPPED WITH:
SODICK "MARK EX" 4-AXIS CNC CONTROL W/COLOR CRT DISPLAY RS-232 PORT & FLOPPY DISK DRIVE SUBMERGED CUTTING |
|
Ad # 8744 | Wire EDM Machines |
1998 |
Charmilles |
robofil 2020SI |
Excellent |
sold |
Photo /
More Info. |
40 x 20 wire: Charmilles CNC CONTROL -generic specs, verify..
Max. Machining Speed: 28 Sq. In/hr
Machining Table with X & Y Axes
Travel X: 12.52"
Travel Y: 8.58"
Maximum Workpiece Dimension: 39" W X 19.9" D
Maximum Workpiece Weight: 1,100 Lbs
Maximum Workpiece Height
(Submerged): 6"
Maximum Workpiece Height: 10.2"
Uvz Axes Unit
Travel U: +1.89"
Travel V: +1.89"
Travel Z: 4.57"
Taper Angle Possible (Part Height): + 30 Deg (2.64")
+ 22 Deg (3.94")
+ 16 Deg (5.90")
+ 12 Deg (7.87")
Measuring Resolution: 0.00002"
Adjustable Manual Speed: 0.01 35.4"/min
Anti-collision
Wire Feed
Adjustable Wire Speed: 0.7 to 49 Ft/min
Adjustable Wire Tension: 0.7 to 6.6 Lbs
Size of Wire Spools (Standard): 4 to 8 Kg (9 to 17 Lbs)
Autonomy of Wire (0.010" Diameter
Advancing 39 Ft/min)
4 Kg Spool: 12 Hour
8 Kg Spool: 24 Hour
Upper/lower Machining Heads
Max. Workpiece Height
For Threading/rethreading: 9.84"
Diameter of Closed Guides
(Standard Equipment): 0.004" & 0.010"
Range of Movement of Outer
Flushing Nozzle: 0.280"
Positional Variation of Central
Flushing Nozzle: 0.016"
Work Tank
Dimensions: 39.2" W X 21.3" D X 14.8" H
Capacity: 64 Us Gallons
Dielectric System
Dimensions: 35.4" W X 89.8" D X 45.3" H
Capacity: 265 Us Gallons
Weight, Empty: 1,000 Lbs
Weight, Full: 3,200 Lbs
Number of Paper Cartridge Filters: 16
Autonomy (With High Rough Cutting
Speed): Approx. 250 Hours
Maximum Worktank Temperature
Variation: + 1 Deg F.
Injection Pressure
Adjustable Between: 0 to 280 Psi
Number of Programmable Flushing
Pressure Levels: 16
Chilled Water Supply
At 50 Deg F (W/centralized Tower
Systems): Approx. 100 Gallons/hour
Compressed Air Supply
Pressure Range: 90 to 100 Psi
Flow: 60 Cu. In./min.
Electrics: with Transformer 208/3
Taps Range from 190 480 Volts
Software options-micro surf & taper expert
includes transformer & chiller
Erowa tooling
cutting hrs 9,300 |
|
Ad # 13467 | Wire EDM Machines |
2000 |
Sodick |
AQ325 |
Excellent |
sold |
Photo /
More Info. |
Statesville: FEATURES INCLUDE:
* LN1W CNC Control,Linear Motors(X,Y)
* Complete Dielectric Filtration System
* Automatic Temperature Control Unit (Chiller)
* Submersible Flushing
* Automatic Wire Threading
SPECIFICATIONS INCLUDE:
* X, Y & Z Axes Travel= 13.7 x 9.8 x 8.6
* Work Tank Inside Dimensions= 35.2 x 25.5
* Maximum Workpiece Weight= 990 Lbs.
* Maximum Taper= 20 @ 3.1
|
|
Ad # 13468 | Wire EDM Machines |
2001 |
Sodick |
AQ535LHLN1W |
Excellent |
sold |
Photo /
More Info. |
X, Y & Z Axes Travel= 21.6 x 13.7 x 15.8: FEATURES INCLUDE:
* LN1W CNC Control, Linear Motors (X,Y)
* Power Supply,
* Complete Dielectric Filtration System
* Automatic Temperature Control Unit (Chiller)
* Submersible Flushing
* Automatic Wire Threading
SPECIFICATIONS INCLUDE:
* X, Y & Z Axes Travel= 21.6 x 13.7 x 15.8
* Work Tank Inside Dimensions= 43.3 x 28.3
* Maximum Workpiece Weight= 1760 Lbs.
* Maximum Taper= 20 @ 3.1
|
|
Ad # 13466 | Wire EDM Machines |
2000 |
Sodick |
AQ325/LN10W |
Excellent |
sold |
Photo /
More Info. |
X, Y & Z Axes Travel= 13.7 x 9.8 x 8.6: FEATURES INCLUDE:
* LN1W CNC Control, Linear Motors (X,Y)
* WS4 Submersible indexer
* Complete Dielectric Filtration System
* Automatic Temperature Control Unit (Chiller)
* Submersible Flushing
* Automatic Wire Threading
SPECIFICATIONS INCLUDE:
* X, Y & Z Axes Travel= 13.7 x 9.8 x 8.6
* Work Tank Inside Dimensions= 35.2 x 25.5
* Maximum Workpiece Weight= 990 Lbs.
* Maximum Taper= 20 @ 3.1
|
|
Ad # 11492 | Wire EDM Machines |
1996 |
Mitsubishi |
SX-10 |
Excellent |
sold |
Photo /
More Info. |
travels:13-3/4" x 9-1/2" x 8-1/2": Mitsubishi SX-10 Wire EDM
Model 1996
auto threading
Machining Travels (XYZ): 13.77" x 9.84" x 8.66"
Submerged cutting
auto wire threading
Chiller
programmable angle cut feature: offet 1-1/4" approx 30deg included
Controller Model W11SX
13.5 KW
approx: 13 in/hr cut speed
machining hrs: 1421 hrs as of 6-25-13 |
|
Ad # 5144 | Wire EDM Machines |
1980? |
Elox |
Series I |
Needs Work |
sold |
Photo /
More Info. |
Elox EDM- Wire Machine- needs work: Extra wire, tooling and manuals included.
Fanuc 2000 control. |
|
Ad # 14733 | Wire EDM Machines |
1984 |
Bridgeport |
Japax |
Good |
sold |
Photo /
More Info. |
: Bridgeport: Japax wire EDM
Specifications are:
Max work piece size (WxDxH)
400x500x150mm Max
work piece weight 150kgf.
longitudinal table travel 200mm.
table cross travel 350mm.
vertical slide movement 150 mm.
Wire diameter 0.05-0.25mm.
Wire tgension 0.2-2kgf.
Table feed resolution 0.001mm/pulse.
Table feed speed 600mm/min
outside dimensions:(WxDxH)1370X1300X1690mm
KGF Dielectric fluid:dionized water |
|
Ad # 12565 | Wire EDM Machines |
1991 |
charmilles |
robofil 310 |
Good |
sold |
Photo /
More Info. |
: 1994 CHARMILLES ROBOFIL 310 WIRE EDM
TRAVEL:
X: 19 INCHES
Y: 9 5/8 INCHES
Z: 15 INCHES
COMES WITH TRANSFORMER, ADVANTAGE
CHILLER, AND EBBCO D.I. CANISTER
WORKS GREAT
JUST NEED FLOOR SPACE IN SHOP FOR NEWER
MACHINE
|
|
Ad # 15559 | Wire EDM Machines |
2001 |
Sharp |
SED 301 |
Good |
sold |
Photo /
More Info. |
50 amp: USED SHARP ELECTRICAL DISCHARGE MACHINE
SINKER TYPE, HOURS 1446
CAPACITY 50 AMPS
WORK TABLE AREA 11.8 X 23.6
X - TRAVEL 11.8
Y - TRAVEL 7.8
RAM TRAVEL 7.8
WORKHEAD TRAVEL 7.9
RAM TO TABLE 7.5 23.1
WORK TANK 20L x 33W x 12H
MAX. ELECTRODE WEIGHT 132 LBS.
MAX. WORK PIECE WEIGHT 1,200 LBS.
MACHINE WEIGHT 2,310 LBS. (DRY APPROX.)
DIELECTRIC TANK 63 GALLONS (BUILT IN)
PUMP 0.85 HP
EQUIPPED WITH: DIGITAL READ OUT, PERMENANT
MAGNETIC CHUCK,
ONE SHOT CENTRAL LUBE & WORK LIGHT
POWER SUPPLY:
USED SHARP AZ50 POWER SUPPLY
AMPS 50
4.5 KVA 220/3/60
WEIGHT 390 LBS.
|
|
Ad # 8598 | Wire EDM Machines |
1993 |
Charmilles |
Robofill 500 |
Very Good |
Sold |
Photo /
More Info. |
Large: Wire EDM
Mecatool Pallet, Chiller & Transformer
19,076 Hrs
Factory Specs
Charmilles Robofil 500
Travel 15.75" x 27.5" x 15.75"
Taper ± 30 deg.
Max Workpiece 4400 lbs.
|
|
Ad # 8597 | Wire EDM Machines |
1995 |
Charmilles |
310 |
Very Good |
Sold |
Photo /
More Info. |
15.7" x 9.8" x 15.7" travels: Includes Mecca rail system-w/ back & side rails , Chiller & Transformer
only cuttting hrs 18,500 on time
Brass Generator option included
Fatory Specs:below
Specification Description
Maximum Workpiece Weight 2207 Lbs
Maximum Workpiece Size 33.5" x 19.7" x 15.7"
Machining Stroke ( X x Y x Z ) 15.7" x 9.8" x 15.7"
Taper Capacity 0 to 30 Degrees
Wire Diameter 0.010"
Approximate Overall Dimensions 71"LR x 63"FB x 88"H
Approximate Machine Weight 5,511 Lbs
Equipped With:
* Charmilles CNC Control * 14" Color Graphics Monitor * 16-Bit Microprocessor * Auto Wire Threading * Remote Hand Pendant * Chiller * Filtration System * Manuals
|
|
Ad # 15547 | Wire EDM Machines |
1991 |
Charmilles Technologies |
Robofil 2020 |
Good |
sold |
Photo /
More Info. |
Travels:X-11.8″,Y=9.8″,Z=9.8″: 1991 Charmilles
Robofil 2020 Wire EDM
Travels:X-
11.8″,Y=9.8″,Z=9.8″
table size: 15.6
x 11.8″
part weight max:
440lbs
Resolution: 1um
max speed :
15mm/s
work tank fluid:
551L
filter system 3
cartridges
Includes
transformer for 460/3
from
std(factory)
machine voltage of
400 vac/3
no chiller
Std Specs below-
please verify below:
TRAVELS:
X AXIS
11.8″
Y AXIS
9.8″
Z AXIS
9.8″
WORKTABLE
15.7″ x
11.8″
MAX. DISTANCE
FROM TABLE SURFACE
SPINDLE NOSE
USING MECATOOL
TOOLING:
15.6″
MAX. WEIGHT OF
ELECTRODES:
.. 55
Lbs.
C-AXIS MOVEMENT
360 Degrees
ROTARY SHAFT
SPEED
20 RPM
MAX. MANUAL SPEED
. 15mm/s
WORKTANK
EFFECTIVE DIMS.
23.8″ x 15.7″ x
7.2″H
MAX. WORKPIECE
WEIGHT
440 LBS.
MINIMUM COMMAND
UNIT
. 0.00004″
|
|
Ad # 6339 | Wire EDM Machines |
1997 |
Fanuc |
Alpha 1C |
Very Good |
sold |
Photo /
More Info. |
Fanuc, Alpha 1C, Wire EDM Machine: Wire EDM
Fanuc 16
C-Frame
33" x 27" x 12" Max Part Size
1500 lb Part Weight
20" x 14" x 12" Travel |
|
Ad # 8554 | Wire EDM Machines |
Oct 84 |
JAPAX |
Series S |
Very Good |
sold |
Photo /
More Info. |
14 x 8 x 6 JAPAX Wire EDM with Tilt Axes: Workpiece Size - Max: 20" x 16" x 6"
Workpiece Weight - Max: 330 lbs
Travels:
X: 14"
Y: 8"
Z: 6"
Electrode Diameter Range: 0.002" to 0.010" diam
Japax Type VH 20, 20 Amp Power Supply
Japax Type JAPT-3F CNC Control
Japax Type PW 14H Dieletric/Filter System
Automatic Lubrication
|
|
Ad # 7707 | Wire EDM Machines |
5/89 |
Hansvedt |
DS-2 |
Fair |
Sold |
Photo /
More Info. |
Hansvedt Bench Top 2-Axis Wire EDM: Water Enclosure: 28" x 18"
Cabinet with drawers included
Mounted on castors |
|
Ad # 8415 | Wire EDM Machines |
Nov 1999 |
Handvedt |
DS 30 |
Very Good |
Sold |
Photo /
More Info. |
5-Axis, 15.7 x 11.8 x 10.2 Wire EDM: CNC - 5-Axis control (CD-3050)with 14" color monitor
MACHINE INFORMATION:
Travels:
x; 15.7"
Y: 11.8"
z: 10.2"
Tapering Angle: +/- 12 deg per 4"
Workpiece Size/Max: 24.8" x 17.7" x 9.8"
Workpiece Weight/Max: 1102 lbs
Wire Diameter Range: 0.006" to 0.014"
Dielectric Cooler
Wire cutter
POWER SUPPLY INFORMATION:
Circuit System: VOSFET
Output Current/Max: 25 Amp
Auto Voltage Regulation: Built in
Input Power: 220 vac
Net weight: 1,850 lbs
DIELECTRIC SYSTEM INFORMATION:
Reservoir Capacity: 90 US gallons
Filter Element: Paper Cartridge
Ion Exchange Resin: 1 cuft
Conductivity Control: Automatic
Fluid Temperature Control: Automatic
Net Weight: 550 lbs
Machine Dimension: 52" x 85" x 85"
Generator Dimension: 36" x 48" x 76"H
Filter Dimension: 28.5" x 74" x 62"H |
|
Ad # 4606 | Wire EDM Machines |
2000 |
Mitsubishi |
RA-90 AT |
Excellent |
sold |
Photo /
More Info. |
Mitsubishi wire EDM # RA-90: specs available upon request. |
|
Ad # 10174 | Wire EDM Machines |
1995 |
Sodick |
A-320D |
Good |
Sold |
Photo /
More Info. |
8" x 12" x 16" submerse tank: travels: 8 x 12 x 16
submerse type wire edm
40 AMP power supply
includes rails
no auto threader
RS232 port
floppy drive
color screen
control: EX21
water filter system
manuals
reburbished in 2007 by EDM systems: went through and re-qualified machine-reground table, new seals. |
|
Ad # 8250 | Wire EDM Machines |
2001 |
Mitsubishi |
FA-20M |
Very Good |
sold |
Photo /
More Info. |
550 x 350 x 300mm Mits Wire EDM Machine: It come with 6 roll of new wire 0.02mm |
|
Ad # 13143 | Wire EDM Machines |
1990 |
Mitsubishi |
DWC-90SB |
Good |
sold |
Photo /
More Info. |
(X,Y) 9.84" X 11.81": 1990 Mitsubishi # DWC-90SB
travels:(X,Y) 9.84" X 11.81", UV 1" x 1"
no c axis
Misubishi control
auto threading
chiller & filter system
no tooling included
machine is in good running condition and can demo under power until 2-25-13 then will be taken out from power |
|
Ad # 8186 | Wire EDM Machines |
2004 |
Mitsubishi |
RA-90 |
Very Good |
sold |
Photo /
More Info. |
Mits Ra 90 Wire EDM, with Travels of 12.6 x 9.8 x 6.5: Travels of 12.6 x 9.8 x 6.5
Automatic Wire Threader
|
|
Ad # 13734 | Wire EDM Machines |
1986 |
Mitsubishi |
DWC110H |
Good |
sold |
Photo /
More Info. |
travels:17.7 x 11.8 x 10": 1986 Mitsubishi DWC110H
max work piece dim: 21.8 " x 23.6" x 10.2"
travels:17.7" x 11.8 x 10"
max workpiece weight: 1430lbs
table dim: 23.6 x 25.9"
table speed: 31 in/min
wire dia: 0.002-0.013 inrange
wire feed rate: 9.98 in/sec max
wire tension: 0.44-5.4 lb
no chiller
New wire guides and contacts.
Extra wire and filters.
No wire auto threader.
No tooling.
Wired for 220 volts 3PH.
Manuals an system disks.
rigging/loading feed add $1500.00
Still in production runs good but will be taken out of service on 1-30-14 |
|
Ad # 13042 | Wire EDM Machines |
2001 |
Sodick |
AQ325 |
Excellent |
sold |
Photo /
More Info. |
Travels: X 13.7" x Y 9.8" x Z 8.6": 2001 Sodick AQ325 LN1W Wire EDM Machine
Travels: X 13.7" x Y 9.8" x Z 8.6"
Auto wire threader, EF4 Anti Electrolysis
Circuitry
Linear Motors on X,Y axis
All the machines are sold refurbished and
qualified, and are available for inspection. The
machine can be loaded onto a truck.
There is an option available for us to provide
installation and training. |
|
Ad # 11802 | Wire EDM Machines |
1995 |
Mitsubishi |
CX 20 |
Good |
sold |
Photo /
More Info. |
50 AMP: Travels:19.6" x 13.7" x 12.0" travels: Mitsubishi CX 20 Wire EDM-50 AMP
Machine Spec -please verify
Machine Travels (X,Y,Z) - 19.6" x 13.7" x11.8"
Machining Travels (U,V) - 1.9" x 1.9"
Max Workpiece Dimensions - 33.4" x 25.5" x 11.6" if submerged is 10.4"
Max Workpiece Weight - 1760 Lbs.
Table Dimensions - 29.1" x 23.2"
Wire Diameter Range Capability - .004" to .012"
Control / Power Supply Dimensions - 26" x 24" x 58" H
Control / Power Supply Weight, Approx - 250 Lbs.
Filtration System Dimensions - 44" x 57" x 59"
Filtration System Weight, Approx - 485 Lbs. (dry)
Machine Dimensions - 69" x 79" x 85"
Machine Weight, Approx - 3307 Lbs.
Power Requirements: 3-phase 200/220 VAC + 10%, 50/60 HZ + 1 HZ, 13.5 kVA
Equipped with:
Mitsubishi CNC 5 Axis Adaptive Control w/color CRT
Submerged machining capability
Auto Wire feeder threading
Filtration System
Chiller
Manuals
Minor tooling & spare parts included
|
|