|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Colonial Model - C60RD5-30 |
|---|
| FOR SALE: Ad # 9224 , Year = , Make = Colonial , Model = C60RD5-30 | 
|
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: vertical pull down broach-5 ton 30 in stroke
|
| Ad #
9224 |
| Year:
|
|
| Make:
| Colonial
|
| Model:
| C60RD5-30
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Vertical broaching machine
5 ton -verify ?
30 inch stroke-?
oil filter sys. attached
Please verify specs above
|
| Electrical Description |
|
|
| Comments: |
- Vertical Broaching
Vertical broaching refers to the type of machine that is used to broach a piece part. These machines come in many varieties and adaptations, but in general any machine in which the ram is mounted vertically, instead of horizontally, is classified as a vertical broaching machine. In the case of surface broaching, the ram, which carries its broaching tools mounted in holders, typically moves past the piece part. The piece part is secured in a fixture using hydraulic or mechanical clamps. Some traditional vertical broaching machines are dual- ram, meaning that there are actually two rams mounted on the same machine, and sharing the same hydraulic and mechanical systems. In many cases the part is secured in a shuttle table or swing table, so that the operator can load one piece to be machined, while the other ram is cutting another piece at the same time. Dual-ram vertical broaching machines can also be used to cut two or more successive operations on the same part.
Vertical broaching machines can also be used to cut internal shapes and forms, and can perform very much like traditional horizontal machines. In each case either the piece part is secured while the broaching tool moves past it, or the broach itself is secured while the piece part travels on a table. The former type of machine can be either of the vertical pull-down or pull-up variety (referring to the motion of the broaching tool). The latter is typically referred to as a table-up vertical broaching machine. There are many advantages to using vertical broaching in internal applications, including the tendency to better hold tolerances.
|
|
|
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
