Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13018 | Cylindrical Grinders (O.D. & I.D.) |
1948 |
Norton |
C-22714 |
Good |
sold |
Photo /
More Info. |
12" Between Centers: Norton O D Grinder
Model # C-22714
12" Between Centers
12" x 1" Grinding Wheel |
|
Ad # 14922 | Cylindrical Grinders (O.D. & I.D.) |
1967? |
Parker Majestic |
# 1/16C |
Good |
sold |
Photo /
More Info. |
ID/OD 10" swing x 20": Parker Majestic#1-16C ID/OD universal cylindrical grinder
10" swing max
20" table
std mfg secs below-please verify
Speeds: 25 TO 450 RPM
Stock_number: 60410
Table swivel: 7 DEGREES
Table travel: 16"
Spindle motor: 1- 1/2 H.P.
Condition info: EXCELLENT****
Swing over table: 12"
Cross feed travel: 3- 1/2"
Hole thru spindle: 1- 1/4"
Approx. dimensions: 69"L X 37"D X 57"H
Power table speeds: 3" TO 30" IPM
Cross feed adjustment: 4"
Approx. machine weight: 3,750 LBS.
Cross feed handwheel grad: 0.0005"
Cross feed precision dial grad: 0.000050" |
|
Ad # 5563 | Cylindrical Grinders (O.D. & I.D.) |
|
JONES & SHIPMAN |
1070 |
Good |
Sold |
Photo /
More Info. |
12" x 6" Plain OD Grinder: 12" x 6" Plain OD Grinder
Swing: 10 "
6" Swing 12" Centers Jones & Shipman 1070 OD GRINDER, 10" WHEEL, HYD. TABLE/AUTO INFEED/PLUNGE/RAPID
6" Od Grinder, Jones & Shipman 1070 10" Wheel, Hyd. Table/Auto Infeed/Plunge/Rapid
Std Specs Below-please verify
6" X 12" JONES & SHIPMAN (MADE IN U.K.)
SUPER-PRECISION" PLAIN CYLINDRICAL GRINDER
MODEL:1070
MAXIMUM SWING ..................................... 6"
DISTANCE BETWEEN CENTERS .......................... 12"
TABLE SWIVEL INCLUDED ANGLE:
CLOCKWISE ................................ 20 DEGREES
COUNTERCLOCKWISE ......................... 20 DEGREES
LONGITUDINAL TABLE SPEED (HYDRAULIC) ... 3" TO 240" IPM
ONE REVOLUTION OF HANDWHEEL ...................... 3/4"
FINE FEED KNOB GRADUATIONS .................... 0.0005"
WHEELHEAD:
TRAVERSE ON SCREW (MAX.) ........................... 3"
POWER RAPID ADVANCE/RETRACTION STROKE .............. 1"
CROSS FEED HANDWHEEL GRAD. .................... 0.0002"
ONE DEPRESSION OF FINE FEED LEVER KNOB ........ 0.0001"
AUTO INFEED @ TABLE REVERSALS ...... 0.0001" TO 0.0006"
FEED @ REVERSAL OF TABLE,
REDUCTION IN DIAMETER .............. 0.000002" TO .002"
CONTINUOUS (PLUNGE) INFEED RATE ..... 0.0001" TO .0006"
(PLUNGE) REDUCTION IN DIA. FROM ... 0.004" TO .072" IPM
MAX. RANGE OF PLUNGE INFEED ... 0.8 REV. OF THE HANDWHEEL
WHEELHEAD SLIDE ADJUSTMENT ....................... 7"
SWIVEL OF WHEELHEAD ............. 8 DEGREES (CLOCKWISE)
WHEEL SIZE .............................. 10" X 1" X 3"
WHEEL SPEEDS (2) .................... 2,120 & 2,500 RPM
WHEELHEAD MOTOR ................................ 2.0 HP
WORKHEAD SPINDLE SPEEDS, INF. VARIABLE ... 75 TO 750 RPM
WORKHEAD & TAILSTOCK SPINDLE TAPERS .............. #1MT
APPROX. FLOOR SPACE REQUIRED ................ 66" X 40"
APPROX. MACHINE WEIGHT ...................... 3,360 LBS
HYDRAULIC OPERATION FEATURING:
- POWER TABLE TRAVERSE
- AUTO INFEED
- DUAL RATE (COARSE/FINE) PLUNGE (CONTINUOUS) INFEED
W/DUAL RATE PLUNGE INDICATOR FEED SELECTOR
- POWER RAPID WHEELHEAD ADVANCE & RETRACTION
SPARKOUT TIMER (0 TO 30 SECONDS)FOR AUTO INFEED
& PLUNGE CYCLES
FINE FEED MECHANISM FOR INFEED OF WHEELHEAD
FINE FEED KNOB FOR TABLE TRAVERSE
DUAL LIVE/DEAD WORKHEAD SPINDLE W/INFINITELY
VARIABLE SPINDLE SPEEDS
WORKHEAD SWIVELS
COOLANT SYSTEM
5" 3-JAW CHUCK
WORK LIGHT
3 H.P. WHEELHEAD MOTOR
3/60/220-440 VOLT ELECTRICS
|
|
Ad # 8056 | Cylindrical Grinders (O.D. & I.D.) |
70'S ? |
CRYSTAL LAKE |
608 |
Very Good |
sold |
Photo /
More Info. |
6" SWING, 10" BETWEEN CENTERS: THIS IS A VINTAGE, BELT DRIVEN MACHINE THAT
STILL PERFORMS LIKE NEW. SEPARATE BELTS AND
MOTORS DRIVE THE THE GRINDING WHEEL AND
THE WORKPIECE. THE WORKPIECE SPEED IS
VARIABLE. LUBRICATION IS WITH "OIL POTS".
THIS MACHINE IS STILL POWERED UP AND
OCCASIONALLY IS USED FOR PRODUCTION.
Ultra tight Tolerance - 0.0001 no problem
yes has positive stop on the slide
7" std wheel included
6" swing x 10" centers
free standing
coolant
all guarding
no collets
no manuals |
|
Ad # 1589 | Cylindrical Grinders (O.D. & I.D.) |
1958 |
Jones & Shipman |
# 1300 |
Good |
sold |
Photo /
More Info. |
Jones & Shipman OD/ID Grinder: swing type universal ID spindle on head |
|
Ad # 12947 | Cylindrical Grinders (O.D. & I.D.) |
1982 |
Tos Hostivar |
BUA-16A |
Good |
sold |
Photo /
More Info. |
Length Between Centers-250mm: Universal Center Grinding Machine With Auto Work
Cycle
Swing 160mm
Length Between Centers 250mm
Grinding Wheel Dia.xWidthx Bore 250 x 20 x 76
Max Width Of Grinding Wheel-40mm
Economicaly Ground Dia.-30mm
Max.Dia. Of Ground Work Peice-160mm
Taper In Work Spindle-Morse #3
Taper In Tailstock Sleeve-Morse#2
Swing in Open Rest-30mm
Swing In Closed Rest-5-60mm
Dia. Of 3 Jaw Chuck-80mm
Swivel Of Workhead-90 Degrees
Swivel Of Work Table-10 Degrees
Swivel Of Wheelhead-60 Degrees
Bore In Sleeve For Internal Grinding Spindel-50mm
Coarse Hand Table Feed Per 1 Revalution Of
Handwheel-16mm
Fine Hand Table Per 1 Revalution Of Handwheel-
0.5mm
Speed Of Wheel Spindle-2420-3290 RPM
Speed Of Work Spindle-250,355,500,710 RPM
Max Longitudinal Travel Of Table-290mm
Min Longitudinal Travel Of Table-1mm
Crossfeed Of Wheelhead-100mm
Hydraulic Rapid traverse Of Wheelhead-16mm
infinity Variable Table Speed-0.05-7 M/Min
Lots Of Extras:Steady Rests,Electrical
Components, Extra Parts |
|
Ad # 12946 | Cylindrical Grinders (O.D. & I.D.) |
1984 |
Tos Hostivar |
BHU-25 |
Good |
sold |
Photo /
More Info. |
Max Weight Load-13,227 LBS: Model# BHU 25
Distance Between Centers 630mm x 1000mm
Max Weight Load 13,227 LBS.
Swivel of Working Head 90 Degrees
Taper Bore Of Work Spindle-Morse#4
Taper Bore Of Tailstock Barrell-Morse#3
Diameter of Chuck 125mm
Bore Of Sleeve For SpindleOf InternalGrinding
Attachment-80mm
Max Diameter Swung In Closed Rest-70mm
Max Diameter Swung In Open Rest-70mm
Max. Sum Of Widths Of Compound grinding Wheels-
50mm
Max Width Of Compound Grinding Wheel 100mm
Grinding Wheel/Dia. x Width x Bore 400 x 40 x
127mm
Rate Of Table Travel-Steplessly Variable From-To
M/Min 0,025-6,5
Min. Rate Of Table Travel In Wheel Dressing
M/Min 0,03
Length Of Cross Travel Of Wheel Head 245mm
Hydro-Operated Quick Adjustment Of Wheel Head
40mm
Cross MovmentOf Wheel Head In Automatic
infeeding,Measured Of Work Diameter 1,4mm
Automatic Infeed Of Wheelhead At Table Reversals
mm-Dia. 0,003-0,05
Rate Of Automatic Infeed Of Wheelhead In Plunge-
Cut Grinding mm/Dia. 0,08-6
Lots Of Extras:Steady Rests,Electrical
Components And Parts |
|
Ad # 14895 | Cylindrical Grinders (O.D. & I.D.) |
1953 |
Brown & Sharp |
# 2 |
Good |
sold |
Photo /
More Info. |
ID/OD grinder: 14" swing x 30" centers: Brown & Sharp Universal ID/OD grinder # 2 S/N#521-2-11
ID/OD grinder: 15" max swing x 30" centers
swivel table and head-universal
grinding wheel: 16" dia
Std specs below-please verify actual machine
14" X 30" BROWN & SHARPE UNIVERSAL
I.D./O.D. CYLINDRICAL GRINDER
MODEL:#2 S/N: 521-2-11 NEW: 1953
NOMINAL SWING ................... 14"
DISTANCE BETWEEN CENTERS, NOMINAL ... 30"
DISTANCE BETWEEN CENTERS, MAX ... 33-3/4"
WHEELHEAD MOTOR ........... 3 HP
WHEELHEAD SPINDLE SPEEDS (3) .... 2100, 2400 & 2800 RPM
WHEEL SIZE .......... 14" X 1-1/2" X 5"
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG.
WHEEL SPINDLE SWIVELS ...........90 DEG.
HEADSTOCK MOTOR ............. 1/2 HP
HEADSTOCK SWIVELS ........... 180 DEG.
INFINITELY VARIABLE SPINDLE SPEEDS ..... 25 TO 500 RPM
SPINDLE NOSE ............... A2-6"
INFINITELY VARIABLE TABLE SPEED ........ 3" TO 150" IPM
TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1" SLOW
0.1" FAST
DWELL @ TABLE REVERSAL .. 0 TO 2-1/2" SECONDS
SWIVEL TABLE - TAPER PER FOOT .... 5" BACK
1-1/2" FORWARD
- SCALES FOR ANGULAR SETTING 12 DEG. BACK
3 DEG. FORWARD
AUTOMATIC CROSS FEED, INF. VARIABLE 0.0001" - .003"
POSITIVE STOP SETTING ...... 0.00002"
APPROXIMATE MACHINE WEIGHT ...... 8,300 LBS
DIMENSIONS ..... 112"W X 62"L X 61"H
EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT-off machine now but have it
HYDRAULIC OPERATOR FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-AUTOMATIC PLUNGE INFEED
RIGHT OR LEFT END WHEEL MOUNTING
DOUBLE SWIVEL WHEELHEAD - SWIVELLING @ WHEEL
SPINDLE HEAD OR @ THE WHEEL SLIDE PERMITS ANY
COMPOUND SETTING REQUIRED IN COMBINATION
STRAIGHT AND TAPER GRINDING
DUAL DEAD/LIVE HEADSTOCK SPINDLE
PULL-OUT HYDRAULIC SYSTEM
COOLANT SYSTEM
CHUCK IS MOUNTED ON WORKHEAD SPINDLE
WORK LIGHT
PRESENTLY WIRED FOR 3/60/220 VOLTS
Note: very nice running grinder! |
|
Ad # 14895 | Cylindrical Grinders (O.D. & I.D.) |
1953 |
Brown & Sharp |
# 2 |
Good |
sold |
Photo /
More Info. |
ID/OD grinder: 14" swing x 30" centers: Brown & Sharp Universal ID/OD grinder # 2 S/N#521-2-11
ID/OD grinder: 15" max swing x 30" centers
swivel table and head-universal
grinding wheel: 16" dia
Std specs below-please verify actual machine
14" X 30" BROWN & SHARPE UNIVERSAL
I.D./O.D. CYLINDRICAL GRINDER
MODEL:#2 S/N: 521-2-11 NEW: 1953
NOMINAL SWING ................... 14"
DISTANCE BETWEEN CENTERS, NOMINAL ... 30"
DISTANCE BETWEEN CENTERS, MAX ... 33-3/4"
WHEELHEAD MOTOR ........... 3 HP
WHEELHEAD SPINDLE SPEEDS (3) .... 2100, 2400 & 2800 RPM
WHEEL SIZE .......... 14" X 1-1/2" X 5"
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG.
WHEEL SPINDLE SWIVELS ...........90 DEG.
HEADSTOCK MOTOR ............. 1/2 HP
HEADSTOCK SWIVELS ........... 180 DEG.
INFINITELY VARIABLE SPINDLE SPEEDS ..... 25 TO 500 RPM
SPINDLE NOSE ............... A2-6"
INFINITELY VARIABLE TABLE SPEED ........ 3" TO 150" IPM
TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1" SLOW
0.1" FAST
DWELL @ TABLE REVERSAL .. 0 TO 2-1/2" SECONDS
SWIVEL TABLE - TAPER PER FOOT .... 5" BACK
1-1/2" FORWARD
- SCALES FOR ANGULAR SETTING 12 DEG. BACK
3 DEG. FORWARD
AUTOMATIC CROSS FEED, INF. VARIABLE 0.0001" - .003"
POSITIVE STOP SETTING ...... 0.00002"
APPROXIMATE MACHINE WEIGHT ...... 8,300 LBS
DIMENSIONS ..... 112"W X 62"L X 61"H
EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT-off machine now but have it
HYDRAULIC OPERATOR FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-AUTOMATIC PLUNGE INFEED
RIGHT OR LEFT END WHEEL MOUNTING
DOUBLE SWIVEL WHEELHEAD - SWIVELLING @ WHEEL
SPINDLE HEAD OR @ THE WHEEL SLIDE PERMITS ANY
COMPOUND SETTING REQUIRED IN COMBINATION
STRAIGHT AND TAPER GRINDING
DUAL DEAD/LIVE HEADSTOCK SPINDLE
PULL-OUT HYDRAULIC SYSTEM
COOLANT SYSTEM
CHUCK IS MOUNTED ON WORKHEAD SPINDLE
WORK LIGHT
PRESENTLY WIRED FOR 3/60/220 VOLTS
Note: very nice running grinder! |
|
Ad # 8034 | Cylindrical Grinders (O.D. & I.D.) |
|
Toyoda |
|
Very Good |
Sold |
Photo /
More Info. |
Toyoda OD Grinder: universal in great condition includes all attachments, and a large box of ... |
|
Ad # 1555 | Cylindrical Grinders (O.D. & I.D.) |
1996 |
Jones & Shipman |
Format 15-700 Universal |
Good |
sold |
No Photo /
More Info. |
CNC Universal OD/ID Grinder: Control: Allen Bradley 8600/CRT
Capacity: Swing 9.85 "
Distance Between Centers 27.58 "
Swivel of Table 10/18 Degrees
Grinding Wheel: Diameter 17.73 " Width 1.379 "
|
|
Ad # 12925 | Cylindrical Grinders (O.D. & I.D.) |
2000 |
weldon |
1632 |
Excellent |
sold |
Photo /
More Info. |
16 x 32: Weldon 16 X 32 cnc id/od grinder
Fanuc 15-ot control |
|
Ad # 15661 | Cylindrical Grinders (O.D. & I.D.) |
1994 |
Okamoto |
OGM 12-24U |
Good |
sold |
Photo /
More Info. |
ID/OD :Swing over table: 12.59": 1994 Okamoto OGM 12-24U ID/OD Cylindrical Grinder
Fanuc 21-GA Control
Controlled axes: X & Z
# of Simultaneously controlled axes: 1 Axes
Least input increment: X .00001 & Y .00001
Interpolation: Positioning
Max programmable dimensions: 8 digits
Capacity
Swing over table: 12.59”
Distance between centers: 23.62” Max dia. To ground: 11.81”
Max weight between centers: 330 lbs (center work)
Grinding Wheel
Size: 14” x 1.5” x 5” (O.D. X Width X I.D.)
Speed: 1767/1996 rpm (belt pully)
Max peripheral speed: 98.42 (ft/sec)
Wheel Head
X Axis Travel: 11.81”
Swivel angle: 30 + or –
Least travel increment: .00001”
Continuous feed rate: .00001 ~ 157.48 (in/Min)
Rapid feed rate: 157.48 (in/Min)
Table
Z Axis travel: 29.52”
Swivel angle 3 ~ 10
Least travel increment: .00001
Continuous feed rate: .00001 ~ 157.48 (in/min)
Rapid feed rate: 393.70 (in/min)
Work Head
Spindle type: for dead-live center combined use
Center taper: Mt no. 4
Spindle through hole dia.: .68”
Spindle speed: 10 ~ 500 RPM
Swivel angle: 30~90 Deg.
Tail stock
Spindle stroke: 1.18”
Center taper: MT no. 4
std mfg specs below--verify actual machine
Capacity:
Swing over table: 12.59"
Distance between centers: 23.62"
Max dia. to ground: 11.81"
Max weight between centers: 330 lbs (center work)
Grinding Wheel:
Size: 14" x 1.5" x 5" (O.D. X WIDTH X I.D.)
Speed: 1767/1996 rpm (belt pully)
Max peripheral speed: 98.42 (ft/sec)
Wheel Head:
X-Axis travel: 11.81"
Swivel angle: 30 + or -
Least travel increment: .0001"
Continuous feed rate: .0001 ~ 157.48 (in/Min)
Rapid feed rate: 157.48 (in/Min)
Table:
Z Axis travel: 29.52"
Swivel angle: 3 ~- 10
Least travel increment: .00001
Continuous feed rate: .00001 ~ 393.70 (in/min)
Rapid feed rate: 393.70 (in/min)
Work Head:
Spindle type: for dead-live center combined use
Center taper: Mt no. 4
Spindle through hole dia.: .68"
Spindle speed: 10 ~ 500 RPM
Swivel angle: 30~90 Deg.
Tail stock:
Spindle stroke: 1.18"
Center taper: MT no. 4
Motors: (HP)
Wrinding wheel spindle: 7.3
Workhead spindle: 1.0 ac servo motor
Table feed: 1.2 ac servo motor
wheelhead feed: 1.2 ac servo motor
Lubrication pump: .004
Coolant pump: .33
Magnetic seperator .03
Tank Cap:
Lubrication oil: .79 gal
Collant tank: 31.70 In"
Machine Space: 136.22" x 73.22" x 65.98" (W x Depth x H)
Weight: 7,714 lbs
Control: Fanuc 21-GA
# of controlled axes: X & Z
# of Simultaneously controlled axes: 1 Axes
Least input increment: X .00001 & Y .00001
Interpolation: Positioning
Max programmable dimensions: 8 digits.
|
|
Ad # 12907 | Cylindrical Grinders (O.D. & I.D.) |
1996 |
Tripet |
TST-250 |
Good |
sold |
Photo /
More Info. |
28" OD: Tripet TST 250
Updated Usach Control Yr 2008
28" Swing Max
12,000 Rpm Machine Spindle Speed
ID / OD Spindles
Diamond Dresser
Travels
14" x 24"
Coolent Pump |
|
Ad # 11656 | Cylindrical Grinders (O.D. & I.D.) |
1960s |
Norton |
CV4 |
Very Good |
sold |
Photo /
More Info. |
10" x 36" Angle Head Grinder: Norton CV4
10" x 36"
24" Diameter Grinding wheel
Coolent
|
|
Ad # 11657 | Cylindrical Grinders (O.D. & I.D.) |
1960s |
cinncinati |
14" x 72" |
Very Good |
sold |
Photo /
More Info. |
14" x 72" Angle Head Grinder: Cinncinati 30 Degree Angle Head Grinder
30" Diameter Wheel
14" Swing over Table
72" Between Centers
Semi-automatic
|
|
Ad # 11644 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati Milacron |
? |
Very Good |
sold |
Photo /
More Info. |
14" x 36" OD grinder: Cincinnati Milacron Universal Hydraulic
OD/ID
14" x 36"
14" Grinding wheel Max OD
10" Magnetic Chuck face chuck
4 Jaw 10" Chuck (not Shown) |
|
Ad # 5416 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
10" x 72" |
Fair |
Sold |
Photo /
More Info. |
10" x 72" Norton OD GRinder with 14" Dia Wheel: Swing: 10"
Distance Between centers: 72"
Max. Grind Length: 72"
Wheel Diameter: 24"
Coolant and Filtration System
Three Steady Rests
1 x Diamond Dresser |
|
Ad # 14334 | Cylindrical Grinders (O.D. & I.D.) |
1965 |
Brown and Sharpe |
# 2 Universal |
Good |
sold |
Photo /
More Info. |
OD:21" Swing has 3" Riser x 30" : Brown and Sharpe #2 universal Grinder
Two Wheel
3" Riser swing 21" x 30"
460 voltage
Coolant tank
Machine set up for facing parts.
MODEL:B & S- #2
WHEELHEAD MOTOR ........... 3 HP
WHEELHEAD SPINDLE SPEEDS
(3):2100,2400,2800 RPM
WHEEL SIZE .......... 14" X 1-1/2" X 5"
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER
...... 90 DEG.
WHEEL SPINDLE SWIVELS ...........90 DEG.
HEADSTOCK MOTOR ............. 1/2 HP
HEADSTOCK SWIVELS ........... 180 DEG.
INFINITELY VARIABLE SPINDLE SPEEDS:25 TO
500 RPM
SPINDLE NOSE ............... A2-6"
INFINITELY VARIABLE TABLE SPEED:3" TO
150" IPM
TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1"
SLOW
0.1" FAST
DWELL @ TABLE REVERSAL:0 TO 2-1/2"
SECONDS
SWIVEL TABLE - TAPER PER FOOT .... 5"
BACK
1-1/2" FORWARD
- SCALES FOR ANGULAR SETTING 12 DEG.
BACK
3 DEG. FORWARD
AUTOMATIC CROSS FEED, INF. VARIABLE
0.0001" - 0.003"
POSITIVE STOP SETTING ...... 0.00002"
APPROXIMATE MACHINE WEIGHT . 8,300 LBS
DIMENSIONS ..... 112"W X 62"L X 61"H
EQUIPPED WITH:
HYDRAULIC OPERATOR FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-AUTOMATIC PLUNGE INFEED
RIGHT OR LEFT END WHEEL MOUNTING
DOUBLE SWIVEL WHEELHEAD - SWIVELLING @
WHEEL
SPINDLE HEAD OR @ THE WHEEL SLIDE
PERMITS
ANY
STRAIGHT AND TAPER GRINDING
DUAL DEAD/LIVE HEADSTOCK SPINDLE
PULL-OUT HYDRAULIC SYSTEM
COOLANT SYSTEM
Note
No tail stock
No I.D. Head |
|
Ad # 5386 | Cylindrical Grinders (O.D. & I.D.) |
|
Bertoni &Cotti |
TM 260 |
Very Good |
Sold |
Photo /
More Info. |
BERTONI & Cotti Crankshft Grinder, Model TM260: Includes Leeson Speedmaster, slide feed rate motor controller. |
|
Ad # 13614 | Cylindrical Grinders (O.D. & I.D.) |
1960s |
Landis |
2R Universal |
Good |
sold |
Photo /
More Info. |
10" x 20": Landis 2R Univeral
10" x 24"
Swivel head
ID swing down and OD
"Microfeed"
follow rest
chuck & face plate |
|
Ad # 6799 | Cylindrical Grinders (O.D. & I.D.) |
1960 |
TOS |
7U/630/3000 |
Good |
sold |
No Photo /
More Info. |
: more informations on request |
|
Ad # 1294 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
6 x 18 |
Fair |
sold |
Photo /
More Info. |
Norton OD Grinder (6" dia. x 18" BDC): Max grinding dia 6"
Max grinding length 18"
Wheel 20" dia, 2" wide
Spindle Motor 7.5 HP |
|
Ad # 3733 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
CH 12x36 |
Fair |
Sold |
Photo /
More Info. |
UNIVERSAL ID/OD GRINDER: |
|
Ad # 12715 | Cylindrical Grinders (O.D. & I.D.) |
|
Jack Mill |
|
Fair |
sold |
Photo /
More Info. |
8 x 36: Lots of tooling
8 x 36"
OD & ID spindles
hyd..are fair..but work... |
|
Ad # 6688 | Cylindrical Grinders (O.D. & I.D.) |
1979 |
CINCINNATI-MILACRON |
|
Excellent |
Sold |
Photo /
More Info. |
10"x48"cc CINCINNATI-MILACRON Universal Hydraulic Cylindrical Grinder: 10" x 48"cc CINCINNATI-MILACRON Universal Hydraulic Cylindrical Grinder wit... |
|
Ad # 6689 | Cylindrical Grinders (O.D. & I.D.) |
1991 |
CHEVALIER |
GU-1460-A |
Excellent |
Sold |
Photo /
More Info. |
14”x60”cc CHEVALIER hyd Universal cylindrical grinder, Model GU-1460-A: 14”x60”cc CHEVALIER hydraulic Universal cylindrical grinder w/swing-down in... |
|
Ad # 14790 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati |
8 x 12 x 36 |
Good |
sold sold |
Photo /
More Info. |
12"dia x 36"length: Concinnati 8 x 12 x 36 OD grinder
OD only
max swing 13"
main motor: 5HP
center distance:36" max
vari speed on work head
universal table
16" dia wheel x 1" on machine
coolant
Note: machine was completly refurbished &
upgraded
then never run,looks great!
rigging/loading fee $1000.00 |
|
Ad # 15603 | Cylindrical Grinders (O.D. & I.D.) |
1950 |
Cincinnati |
|
Good |
sold |
Photo /
More Info. |
14" X 36": Cicinnati ID OD grinder all attachments under
power.
14 x 36" |
|
Ad # 6664 | Cylindrical Grinders (O.D. & I.D.) |
1976 |
JONES & SHIPMAN |
1311 |
Excellent |
sold |
Photo /
More Info. |
10” x 18”cc JONES & SHIPMAN universal cylindrical grinder, Model 1311: 10” x 18”cc JONES & SHIPMAN universal cylindrical grinder, Model 1311
Maximum diameter ground with new wheel 10”
Maximum grinding length between centers 18”
Maximum workpiece weight between centers 220 lbs.
Table traverse per handwheel revolution 5”
Table traverse fine feed graduations 0.50”
Table traverse steplessly variable per minute 0.0005”
Minimum table stroke under hydraulic control 0.040”
Table swivel adjustment-included angle clockwise/
included angle anti-clockwise 19°/20°
Infeed rate at table reversal, reduction in work diameter 0.0002”-0.0012”
Wheelhead feed handwheel-rapid/standard feed 0.250”/0.50”
per revolution, reduction in work diameter
(6) workhead speeds 40-320 RPM
Workhead swivel, clockwise/counter-clockwise 15°/90°
Workhead and tailstock spindle center taper #3 Morse
Standard grinding wheel (Type EIU wheelhead) 14” diameter x 1” wide x 5”
bore
(2) wheelhead speeds 2,000 & 2,680 RPM
Wheelhead swivel adjustment each side or normal
position 180°
Cross traverse of wheelhead 8-1/16”
EQUIPPED WITH:
Manually operated or hydraulically actuated table traverse
Manually operated, automatic intermittent (at table reversal) and automatic continuous (plunge grinding) modes of wheelhead infeed
Rapid wheelhead advance and retraction
Swing-around internal grinding attachment with spindle
¾ H.P. 3/60/220-440 volt motorized workhead with 6” diameter 4-jaw chuck, 6 ¼” diameter magnetic chuck, and combination live/dead center
Tailstock with assorted full and half centers
(1) 5/16”-3” diameter capacity 3-point plain-type steady rest
(1) 5/16”-3” diameter capacity 2-point open-type steady rest
Table mounted diamond holder for dressing wheel
Self-contained hydraulic system with 1 H.P. motor
External coolant pump and tank
Manually operated 1-shot lubrication system
5.5 H.P. 3/60/220-440 volt wheelhead motor and electrical controls |
|
Ad # 1257 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
Type E |
Fair |
Sold |
Photo /
More Info. |
OD Grinder 14" x 35 Universal head: 14" x 35" Capacity
Universal Head
US Variable speed drive |
|
Ad # 6614 | Cylindrical Grinders (O.D. & I.D.) |
|
JONES & SHIPMAN |
1314 |
Very Good |
sold |
Photo /
More Info. |
8" X 24" JONES & SHIPMAN MODEL 1314 HYD UNIVERSAL CYLINDRICAL GRINDER: 8" X 24" JONES & SHIPMAN MODEL 1314 TOOLROOM
HYDRAULIC UNIVERSAL CYLINDRICAL GRINDER
MAXIMUM DIAMETER GROUND: 8"
GRINDING LENGTH BETWEEN CENTERS: 24"
HYDRAULIC TABLE SPEEDS: 3 TO 144 IPM
FEED RATES: 0.0002" TO 0.0012"
WHEEL SIZE: 8" X 3/4" X 1-1/4"
WHEELHEAD CROSS TRAVEL: 6"
WORKHEAD SPEEDS: (6) 36 TO 500 RPM
WHEELHEAD SPEEDS: (4) 2800 TO 4180 RPM
EQUIPPED WITH:
RISE & FALL WHEELHEAD
SWIVEL TABLE
SWIVEL WHEELHEAD
COOLANT TANK & PUMP
ONE-SHOT LUBRICATION
TAILSTOCK |
|
Ad # 8778 | Cylindrical Grinders (O.D. & I.D.) |
|
Cincinnati |
D-E |
Very Good |
Sold |
Photo /
More Info. |
14 x 36: MAKE: CINCINNATI MILACRON
TYPE: UNIVERSAL GRINDER
MODEL: D-E
CAPACITY: 14' OR 355.6MM DIA. AND 36' OR 914.4MM IN LENGTH
SERIAL# 353213D73-0006
CONTROL VOLTAGE: 115-120VAC 50/60 HERTZ
AC INPUT POWER 230VAC 3 PHASE 50/60 HERTZ
FULL LOAD AMPS: 30 AMPERES
TERMS AND CONDITIONS:
SPECIFICATIONS AND EQUIPMENT SUBJECT TO VERIFICATION WITH CORPORATE APPROVAL
FULL PAYMENT DUE PRIOR TO MACHINE PREPARATION FOR SHIPMENT
SUBJECT TO AVAILABILIty
collector with it
|
|
Ad # 12654 | Cylindrical Grinders (O.D. & I.D.) |
2011 |
Supertec |
G32P-60CNC |
Excellent |
sold |
Photo /
More Info. |
24": This Supertec Grinder G32P-60CNC
Was installed in Summer of 2011.
It was never put into production (increased order never came from customer); only has approx. 20 Test hours.
includes tailstock
no id spindle
Machine has Full enclosure and splash guard w/ oil mist separator,
Fanuc OiT-D Control,
(2) OGC3-1003 5" wheel flanges,
coolant system w/paper filter and magnetic separator (60L/min,140L)
between centers 24"
Max load held 330lbs
230V/60/3
sells new for 135K |
|
Ad # 14268 | Cylindrical Grinders (O.D. & I.D.) |
1965 |
Cincinnati |
DE |
Good |
sold |
Photo /
More Info. |
OD only :grinder 18" x 48": Cincinnati Model DE :OD only Grinder
Rebuilt 1986 original machine
1965
18" x 48" Travel
14" x 2" wide Wheel
Indexing Grinder Head
Power Cross Feed
|
|
Ad # 5260 | Cylindrical Grinders (O.D. & I.D.) |
|
Heald |
75-A |
Good |
sold |
Photo /
More Info. |
Heald ID Grinder: 9" Magnetic Chuck
1" Arbor
Chuck speed 550-1740 rpm
|
|
Ad # 10627 | Cylindrical Grinders (O.D. & I.D.) |
1970 |
Brown & Sharpe |
1020U |
Very Good |
Sold |
Photo /
More Info. |
10 x 20: Brown & Sharpe ID/OD Grinder
Model: 1020U
Serial: 521-1020-226
Built in: 1970s
Comes with transformer
Wired for 460 volts, 3 phase, 60 cycle
Control voltage 115 volts
Full load amperes 5
Ampere rating largest motor 3.1 amperes
Very good condition. Everything works: extra hubs, wheels, and steady rests included.
Std specs below-please verify!
Universal O.D. / ID. grinder W/ drop Down I.D spindle
7.5" Dia. 4 jaw chuck
12" dia, wheel
11" swing x 20" centers
Headstock Speeds 60-600 RPM
Table speeds 10-70 IPM
2 HP main motor
Web-Specs
Grinding Capacity: 10" x 20"
Grinding Wheel Size: 10" Dia. x 1/2" Wide
Grinding Wheel Speeds: 2,500, 3,000 & 3,600 RPM
Table Longitudinal Feed Rates, Variable: 3 - 150 IPM
Table Travel Per Rev. of Handwheel, Slow: .1"
Table Travel Per Rev. of Handwheel, Fast: 2.5"
Table Dwells: 0 - 2-1/2 Seconds
Swivel Table Angular Adjustment: 8 Degrees
Table Cross Feed Rates: .0001" - .003"
Work Head Speeds, Variable: 60 - 600 RPM
Machine Weight, Approx.: 5,700 Lbs.
Combination Live/Dead Headstock
Equipped With:
Swing Down Internal Grinding Attachment
Coolant Pump & Tank
|
|
Ad # 5196 | Cylindrical Grinders (O.D. & I.D.) |
|
Myford |
|
Good |
Sold |
Photo /
More Info. |
5"x12" MYFORD PLAIN CYLINDRICAL GRINDER: 5'X12" TABLE
Spindle speed 1,830-1,988rpm
Power in/outfeed
Coolant reservoir |
|
Ad # 5185 | Cylindrical Grinders (O.D. & I.D.) |
1977 |
Studer |
RHU-400/125-C |
Very Good |
sold |
Photo /
More Info. |
Studer 5" x 16" Hydraulic Universal OD Grinder: OD grinder
Max Swing: 5" (125mm)
Distance Between Centers: 16" (400mm)
Travel in X: 17.5" (440 mm)
Grinding Wheel (left side) Specifications:
Diameter 16"
Max Width: 2"
Bore: 127 mm
Power: 4 hp
Workhead Swivel: 90 deg
Work Table Swivel: 15 deg(?)
Wheelhead Swivel: 45 deg
Workhead Spindle Nose: MT 5
Workhead Speed Range: 30 - 675 rpm
Table Speeds: 0.05 - 5.5 meters/min (2-220 ipm)
Dresser Holder mounted onto Tailstock(footstock)
Taper Micro Correction on Tailstock(footstock)
Full Coolant and Filtration System
in operation when taken out of service-will hold
0.000050 millionths tolerance |
|
Ad # 5185 | Cylindrical Grinders (O.D. & I.D.) |
1977 |
Studer |
RHU-400/125-C |
Very Good |
sold |
Photo /
More Info. |
Studer 5" x 16" Hydraulic Universal OD Grinder: OD grinder
Max Swing: 5" (125mm)
Distance Between Centers: 16" (400mm)
Travel in X: 17.5" (440 mm)
Grinding Wheel (left side) Specifications:
Diameter 16"
Max Width: 2"
Bore: 127 mm
Power: 4 hp
Workhead Swivel: 90 deg
Work Table Swivel: 15 deg(?)
Wheelhead Swivel: 45 deg
Workhead Spindle Nose: MT 5
Workhead Speed Range: 30 - 675 rpm
Table Speeds: 0.05 - 5.5 meters/min (2-220 ipm)
Dresser Holder mounted onto Tailstock(footstock)
Taper Micro Correction on Tailstock(footstock)
Full Coolant and Filtration System
in operation when taken out of service-will hold
0.000050 millionths tolerance |
|
Ad # 14253 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
Type 1R |
Good |
sold |
Photo /
More Info. |
10" Swing x 20" between centers: Landis Universal Cylindrical Grinder
Model: Type 1R
Capacity: 10" swing x 20" between centers
Electrical: 230/ 3 phase
Maximum Swing over Table 10"
Distance between Centers 20"
Table Traverse Speed2-240 IPM
Traverse Handwheel Graduation.001"
Traverse per Turn of Handwheel.200"
Swivel Table Graduated Degrees Included Angle
20°
Swivel Table Graduated Degrees Inches per Foot
4"
Headstock Center#10 Jarno
Tailstock Center#6 Jarno
Headstock Swivel120°
Standard Grinding Wheel Size12" x 1" x 5"
Maximum Width Full Wheel1.5"
Wheel Spindle Speed2000 & 2530 RPM
Maximum Hydraulic Infeed.090
Rapid Infeed Stroke1"
Grinding Wheel Swivel90° L-R
|
|
Ad # 15581 | Cylindrical Grinders (O.D. & I.D.) |
1966 |
Myford |
Cylindrical Grinder |
Fair |
sold |
Photo /
More Info. |
small: |
|
Ad # 5179 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
767/1 R-Universal |
Good |
sold |
Photo /
More Info. |
14" x 30" Landis OD Grinder: Landis 767/1 R-Universal grinder
Swing: 14"
Distance Between Centers: 30"
Wheel Diam. 14"
NOTE: ID attachment on machine without ID spindle |
|
Ad # 11486 | Cylindrical Grinders (O.D. & I.D.) |
1941 |
Norton |
15 x 72 |
Fair |
sold |
Photo /
More Info. |
OD grinder 15" swing x 72"centers: Norton OD grinder 15" swing x 72"centers
DC vari drive upgraded to work head
15" swing over bed
72" centers
15HP
12"Dia x 2"wide wheel
rigging fee to load:$1200.00 |
|
Ad # 11487 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinatti |
3P1C1L-46 |
Fair |
sold |
Photo /
More Info. |
6" swing x 36" centers: Cincinatti 6" x 36" OD grinder
6" swing
36" centers
2" wide wheel |
|
Ad # 11488 | Cylindrical Grinders (O.D. & I.D.) |
1941 |
Norton |
6 x 48 |
Fair |
sold |
Photo /
More Info. |
OD grinder 6" x 48": Norton OD Grinder 6 x 48"
3" wide wheel |
|
Ad # 13425 | Cylindrical Grinders (O.D. & I.D.) |
2010 |
Okamoto |
OGM8-20UB |
Excellent |
sold |
Photo /
More Info. |
CNC: OD 8.5" swing x 20" centers: Okomato CNC OD grinder
#OGM 8-20-UB
Control: Fanuc Oi-TB--ogmex software
swing over bed 8.5" dia
center dist: 20"
universal table
max turn dia: 7.87In
max weight between centers:44
travel X: 8.46"
swing angle: =- 30 deg
least travel increment(wheel head):0.00001 in
tapers=spindle-tailstock 3MT
spindle thru hole: 0.68 dia
spindle rpm: 15-500
motors: fanuc ac servo
auto lube
coolant/paper filter unit
required power 15kva
wheel dia 12" w/ 5" hole x 1 wide
all manuals
paper filter system
very nice machine -low usage
over 100k new |
|
Ad # 7791 | Cylindrical Grinders (O.D. & I.D.) |
|
Brown & Sharp |
# 13 |
Excellent |
Sold |
Photo /
More Info. |
8" x 24" OD/Universal Tool Grinder: Diameter Swing - Maximum 8"
Distance Between Centers - Maximum 20"
Travel - Longitudinal 20-1/2"
- Traverse 10-1/4"
- Vertical 8-3/8"
Wheel Size 7" x 1/2" x 1-1/4"
Grinding Wheel Speeds (3) 2730 - 5150 RPM
Workhead Speeds (4) 128 - 540 RPM
Table Travel Speeds (6) - Automatic 7.7 - 100 IPM
- Hand Slow and Fast
Table Swivels 3"/Foot Front and Back
Workhead Swivels - Counterclockwise 100 Degrees
- Clockwise 80 Degrees
Grinding Head Swivels 360 Degrees
EQUIPPED WITH:
Tailstock with #2MT Taper
Workhead with #2MT
1 HP Grinding Head Motor, 1735 RPM, 230/460 V, 3.4/1.7 Amps, 3 Phase
1/6 HP Workhead Motor, 1140 RPM, 208-220/440 V, .90/.45 Amps, 3 Phase
1/4 HP Longitudinal Feed Motor, 1725 RPM, 208-220/440 V, 1.0/.5 Amps, 3 Phase
Worklight
*Preliminary Specifications Subject to Verification.
|
|
Ad # 5110 | Cylindrical Grinders (O.D. & I.D.) |
1991 |
Strausak |
57-U/CNC |
Needs Work |
sold |
Photo /
More Info. |
Swiss Built CNC Universal (ID/OD) Precision Grinder: Swiss Built CNC Universal (ID/OD) Precision
Grinder
Almost no hrs on machine...like new
Travels:
X: 680 mm (26.8")
Y: 260 mm (10.25")
Detailed specs:
Main power input: 460/3 load 15KW fused at 25A
air supply: 6 bar pressure, consumption 2m3/h
X-Axis:travel: 260MM, smallest travel increment
0.001mm, max travel speed: 6000 mm/min, feed motor
torque 2Nm
spindle pitch 5mm
Y-Axis :travel 260mm, smallest travel increment
0.001mm, speed max 6000nm/min, torque 2Nm,
turret head-below
External grinding unit: wheel dia 250mm
torque 12.7Nm
motor 4kw,3000rpm,transmission 1:1 spindle speed
range 2000-6000
Internal grinding unit:wheel dia 10-32mm,speed
range 9000-45,000rpm,torque 0.75Nm, power 3.5KW/
8.2A
workhead: MK5 taper, transmission 10:1, speed
range 0-350 RPM, torque 40Nm
tailstock: stepless 0-600N,lateral adj +- 0.08
nm
travel betwween centers max50mm-min/29mm Min
Dual OD Grinding Wheels:
Wheel Diameter: 250 mm (10")
Motor Power: 4kW (5.5 hp)
Spindle Speed: 2,000 - 6,000 rpm
ID Spindle speed: 45,000 RPM
Wheel base manually swivels between ID/OD
spindles with degree scale on base-w axis
uses chuck or collet system
Control: IBH micro modus 2 S/N# 90.7865
Internal Grinding Spindle: (Turret Mounted)
Type: MFN 1045
I.D. Spindle Speed: 9,000 - 45,000 rpm
Motor Power: 3.5 kW (4.5 hp)
Workhead:
Mounting Taper: MK 5
Speed Range: 0 - 350 rpm (programmable)
Torque at Spindle: 40 Nm
Control: ZBH Micro-Modus 2# H6.0.00V2A0S
Has canned cylces in control
Also includes:
Continuous Path "U" Axis- manual rotate of base with Remote jog Pendent
Have All Manuals/electrical-operation in english and german language
Control # ABNR-9004.124.084 S/N # 90.7685
Note:Iron is like new ,little used..Machine has control issue but comes up with alarm-we think it could be very minor, paramaters,door interlocks,ect..not major?
priced to sell !!
might want to update with new control? |
|
Ad # 5110 | Cylindrical Grinders (O.D. & I.D.) |
1991 |
Strausak |
57-U/CNC |
Needs Work |
sold |
Photo /
More Info. |
Swiss Built CNC Universal (ID/OD) Precision Grinder: Swiss Built CNC Universal (ID/OD) Precision
Grinder
Almost no hrs on machine...like new
Travels:
X: 680 mm (26.8")
Y: 260 mm (10.25")
Detailed specs:
Main power input: 460/3 load 15KW fused at 25A
air supply: 6 bar pressure, consumption 2m3/h
X-Axis:travel: 260MM, smallest travel increment
0.001mm, max travel speed: 6000 mm/min, feed motor
torque 2Nm
spindle pitch 5mm
Y-Axis :travel 260mm, smallest travel increment
0.001mm, speed max 6000nm/min, torque 2Nm,
turret head-below
External grinding unit: wheel dia 250mm
torque 12.7Nm
motor 4kw,3000rpm,transmission 1:1 spindle speed
range 2000-6000
Internal grinding unit:wheel dia 10-32mm,speed
range 9000-45,000rpm,torque 0.75Nm, power 3.5KW/
8.2A
workhead: MK5 taper, transmission 10:1, speed
range 0-350 RPM, torque 40Nm
tailstock: stepless 0-600N,lateral adj +- 0.08
nm
travel betwween centers max50mm-min/29mm Min
Dual OD Grinding Wheels:
Wheel Diameter: 250 mm (10")
Motor Power: 4kW (5.5 hp)
Spindle Speed: 2,000 - 6,000 rpm
ID Spindle speed: 45,000 RPM
Wheel base manually swivels between ID/OD
spindles with degree scale on base-w axis
uses chuck or collet system
Control: IBH micro modus 2 S/N# 90.7865
Internal Grinding Spindle: (Turret Mounted)
Type: MFN 1045
I.D. Spindle Speed: 9,000 - 45,000 rpm
Motor Power: 3.5 kW (4.5 hp)
Workhead:
Mounting Taper: MK 5
Speed Range: 0 - 350 rpm (programmable)
Torque at Spindle: 40 Nm
Control: ZBH Micro-Modus 2# H6.0.00V2A0S
Has canned cylces in control
Also includes:
Continuous Path "U" Axis- manual rotate of base with Remote jog Pendent
Have All Manuals/electrical-operation in english and german language
Control # ABNR-9004.124.084 S/N # 90.7685
Note:Iron is like new ,little used..Machine has control issue but comes up with alarm-we think it could be very minor, paramaters,door interlocks,ect..not major?
priced to sell !!
might want to update with new control? |
|
Ad # 6450 | Cylindrical Grinders (O.D. & I.D.) |
1952 |
CINCINNATI |
|
Very Good |
sold |
Photo /
More Info. |
10´´ X 24´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 10" X 24" CINCINNATI UNIVERSAL CYLINDRICAL
GRINDER:
TYPE ................................ KNEE HOLE
SWING OVER BED - MAXIMUM ............ 11´´
MAXIMUM CENTER DISTANCE............ 24´´
HYDRAULIC TABLE TRAVERSE ............ YES
AUTOMATIC INFEED AT TABLE REVERSAL .. YES
VARIABLE SPEED WORKHEAD ............. YES
GRINDING WHEEL SIZE ................. 12´´ DIA. X
1´´ W
INTERNAL GRINDING ATTACHMENT ........ YES
COOLANT ............................. YES
DRESSER MOUNTED ON TAILSTOCK ........ YES
SWIVEL .............................. TABLE -
WORKHEAD - WHEELHEAD
WHEELHEAD MOTOR ..................... 2
HORSEPOWER
I.D. SPINDLE MOTOR .................. 1
HORSEPOWER
WORKHEAD MOTOR ...................... 1/4
HORSEPOWER |
|
Ad # 6449 | Cylindrical Grinders (O.D. & I.D.) |
1993 |
CHEVALIER |
GU-1124A |
Very Good |
sold |
Photo /
More Info. |
11´´ X 24´´ CHEVALIER UNIVERSAL CYLINDRICAL GRINDER: 11´´ X 24´´ CHEVALIER UNIVERSAL CYLINDRICAL GRINDER:
MAXIMUM WORK SWING ........................ 10-1/2´´
DISTANCE BETWEEN CENTERS .................. 24´´
GRINDING WHEEL SIZE ....................... 16´´ X 1´´ X 5´´
GRINDING WHEEL SPEEDS ..................... (2) 1600 & 1900 RPM
WORKHEAD SPEEDS (VARIABLE) ................ 10 TO 507 RPM
TABLE SPEED (VARIABLE) .................... 2 TO 155 IPM
3-JAW WORKHEAD CHUCK ...................... 8´´
SWIVEL WORKHEAD / WHEELHEAD / TABLE ....... YES
DROP-DOWN I.D. GRINDING SPINDLE ........... YES
COOLANT ................................... YES
PLUNGE & SPARKOUT ......................... YES
HYDRAULIC TABLE TRAVERSE .................. YES
I.D. GRINDING SPINDLE MOTOR ............... 2 HORSEPOWER
HYDRAULIC MOTOR ........................... 2 HORSEPOWER
WHEELHEAD MOTOR ........................... 5 HORSEPOWER |
|
Ad # 10507 | Cylindrical Grinders (O.D. & I.D.) |
|
Studer |
Model RHU-450 |
Good |
sold |
Photo /
More Info. |
Studer Model RHU-450, Universal Cylindrical Grinder 12" x 30"cap: Studer Universal Cylindrical Grinder
Has Swing Down I.D. Grinding Head
Model RHU-450
Max. swing diameter 12"
Max. distance between centers 30"/34"
Max. diameter grinding wheel 12"
Table overall surface area 4.5"x38"
Table approx. feed range (variable) 0 - 20 FPM
Workhead speed range (variable) 0 - 650 RPM
Grinding wheelhead infeed range .008" - .072"
Grinding wheelhead drive motor(approx.) 2 HP
|
|
Ad # 10507 | Cylindrical Grinders (O.D. & I.D.) |
|
Studer |
Model RHU-450 |
Good |
sold |
Photo /
More Info. |
Studer Model RHU-450, Universal Cylindrical Grinder 12" x 30"cap: Studer Universal Cylindrical Grinder
Has Swing Down I.D. Grinding Head
Model RHU-450
Max. swing diameter 12"
Max. distance between centers 30"/34"
Max. diameter grinding wheel 12"
Table overall surface area 4.5"x38"
Table approx. feed range (variable) 0 - 20 FPM
Workhead speed range (variable) 0 - 650 RPM
Grinding wheelhead infeed range .008" - .072"
Grinding wheelhead drive motor(approx.) 2 HP
|
|
Ad # 12475 | Cylindrical Grinders (O.D. & I.D.) |
|
Ribon |
Rur 1000 |
Good |
sold |
Photo /
More Info. |
12" x 36": Ribon Rur 1000
Id / OD Grinder
14" Wheel
12" x 36" Travels
Hydrailic Travels
1750 RPM
Coolent
Made in italy |
|
Ad # 10465 | Cylindrical Grinders (O.D. & I.D.) |
|
Heald |
273A |
Good |
Sold |
Photo /
More Info. |
Heald Model Internal Grinder : HEALD INTERNAL GRINDER
Model: 273A S/N 62549
Maximum Swing Inside Table 24.5"
Swing Inside Standard Chuck Guard 20"
Swing W/ Workhead at 90 Degree 13"
Bore Length Ground, Maximum 16"
Grinding Stroke, Minimum .125"
Grinding Stroke, Maximum 16"
Table Longitudinal Travel 20"
Wheelhead Cross-Slide Travel 1.5"
Workhead Positioning Slide Travel 17.5"
Workhead Swivel Angle, Maximum 90 Degree
Grinding Spindle Speeds, Range 0-500 RPM
Grinding Table Speeds, Infinite Variable 0-18 FPM
Power Rapid Table Traverse 18 FPM
5 HP 3500 RPM Grinding Spindle Motor
1.5 HP 3600 RPM Workhead Chuck Motor
0.5 HP Hydraulic Motor
|
|
Ad # 10464 | Cylindrical Grinders (O.D. & I.D.) |
1978 |
Heald/Cincinnati |
272 "SIZEMATIC" |
Good |
Sold |
Photo /
More Info. |
Heald/Cincinnati Milacron 272 SISEMATIC, INTERNAL GRINDER: HEALD/CINCINNATI MILACRON
MODEL #272 "SIZEMATIC" S/N 60895 NEW: 1978
INTERNAL GRINDER
CATALOGUE SPECIFICATIONS:
Swing Over Table, Maximum 18"
Bore Diameter Ground, Minimum .125"
Bore Diameter Ground, Maximum 5.5"
Bore Length Ground, Maximum 12"
Table Longitudinal Travel 30"
Hole Thru Workhead Spindle, Diameter 1.59"
Grinding Angle, Maximum Included 60-DEGREES
Workhead Spindle Speeds, Range 133 TO 400 RPM
Grinding Table Speed, Infinite 0 TO 20 FPM
Power Rapid Table Traverse 35 FPM
Wheel Wear Compensation, Range 0 TO .004"
Power Cross Feed On Diameter, Max .042"
Grinding Spindle Motor, Horsepower 5 HP/3500 RPM
Workhead Chuck Motor, Horsepower 3/2/1.5/1
Workhead Chuck Motor, RPM 1770/1175/885/575
Electrical System 440/3/60
Overall Dimensions, W X D 11' X 7'
Overall Height 7'
Weight, Approximately 8000 LBS
|
|
Ad # 15923 | Cylindrical Grinders (O.D. & I.D.) |
1997 |
Toyoda |
GL4EA-50E |
Good |
sold |
Photo /
More Info. |
Swing 320 mm x 500mm centers: 1997 TOYODA GL4EA-50E CNC Universal OD Grinder with GC 32 CONTROL with auto... |
|
Ad # 6149 | Cylindrical Grinders (O.D. & I.D.) |
1970 |
CINCINNATI-HEALD |
273A |
Good |
Sold |
Photo /
More Info. |
# 273A CINCINNATI-HEALD Universal Internal Grinder: Max. swing over table extension w/o guard 24 ½”
Max. swing inside guard 28”
Swing, work-head swiveled 90° 12”
Angular adjustment of work-head 90°
Work-head cross-slide travel 1 ½”
Distance work-head flange to edge of wheel slide 0-29 1/16”
Table speeds for grinding 0-18 FPM
Variable work-head speeds 50-500 RPM
Rapid traverse table 18 FPM
One turn of cross feed hand-wheel .050” on dia.
Cross feed in increments, at one or both ends of
table stroke .0001”-.0005” on dia.
Minimum stroke .125”
One turn of work-slide hand-wheel .100”
One turn of table hand-wheel 3 ¾”
EQUIPPED WITH:
Hydraulic unit
Coolant tank w/ pump
12,000 RPM Heald Red Head Spindle
Auto. Lub. System
TRAK 101 1-axis D.R.O.
12” Dia. 3-jaw universal chuck
Work light
Chuck guard
1 ½ H.P. work-head drive motor
5 H.P. wheel-head drive motor |
|
Ad # 10386 | Cylindrical Grinders (O.D. & I.D.) |
1983 |
Schumag |
NS-11 |
Very Good |
Sold |
Photo /
More Info. |
Automatic Point/Needle-wire grinder:0.0285-0.1433in: Operating range below
shaft dia,approx.0.0285-0.1433in-- 0.7mm to 3.6mm
shaft length w/out needed point 50 mm-150 mm; 1.969in to 5.906"
performance with transport wheel 7400-37100 pieces/hr
transport wheel dia. 11.3386"x 1.7716"
4HP
2880 RPM
grinding wheel : 7" wide x 17" dia max
10 extra rubber wheels included
auto pallet loader
manuals
|
|
Ad # 11332 | Cylindrical Grinders (O.D. & I.D.) |
1981?? |
Cincinnati |
DA-370 Plain |
Good |
sold |
Photo /
More Info. |
10 x 48": Cincinnati DA 370 Plain Cyylindrical grinder
10 x 48"
spindle travel-
max workpiece weight-
manuals
more info & pix to follow |
|
Ad # 11330 | Cylindrical Grinders (O.D. & I.D.) |
90's ? |
Enprotech/CCI |
G10-20 |
Very Good |
sold |
Photo /
More Info. |
10 x 20 OD: Used OD Grinder ENproteck/CCI G10-20
10"Dia x 20" length
50-300 RPM
5 HP
coolant tank w paper filter
uses half dead carbide centers
NO ID spindle but has drop down attach arm for one to be mounted
Wheel: 14 x 1.5"
DRO-on infeed
ways look great--little use on machine
no manuals
some tooling |
|
Ad # 7678 | Cylindrical Grinders (O.D. & I.D.) |
1942 |
CINCINNATI |
ER |
Good |
sold |
Photo /
More Info. |
12´´ X 72´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 12´´ X 72´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
SWING OVER BED ...................... 12-1/2´´
DISTANCE BETWEEN CENTERS ............ 72´´
HYDRAULIC TABLE TRAVEL .............. 3 TO 220 IPM
AUTOMATIC INFEED .................... .002´´ TO .0125´´
WORKHEAD SPEEDS (VARIABLE) .......... 55 TO 500 RPM
GRINDING WHEEL ...................... 14´´ X 1-1/2´´
DROP DOWN ID ATTACHMENT
TABLE MOUNTED DRESSER
5´´ STEADY REST
BACKREST
COOLANT
3 HORSEPOWER WHEELHEAD MOTOR
1-1/2 HORSEPOWER HYDRAULIC MOTOR
1 HORSEPOWER VARIABLE SPEED WORKHEAD MOTOR
3/4 HORSEPOWER ID WHEELHEAD MOTOR |
|
Ad # 7683 | Cylindrical Grinders (O.D. & I.D.) |
|
LANDIS |
3RH |
Very Good |
Sold |
Photo /
More Info. |
24´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER : 24´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER
NOMINAL GRINDING CAPACITY ........ 24´´ X 96´´
ACTUAL SWING OVER TABLE .......... 25-1/2´´
GRINDING WHEEL SIZE .............. 14´´ X 1-1/2´´ X 5´´
GRINDING WHEEL SPEEDS ............ (2) 1720 & 2185 RPM
INTERNAL SPINDLE SPEED ........... 15000 RPM
TABLE TRAVERSE SPEED (VARIABLE) .. 2 TO 240 IPM
WORKHEAD SPEEDS (VARIABLE) ....... 12 TO 360 RPM
WORKHEAD / WHEELHEAD / TABLE ..... SWIVEL
WORKHEAD SPINDLE ................. LIVE OR DEAD
INFEED ........................... AUTOMATIC
CHUCK ............................ 18´´ 4-JAW
I.D. SPINDLE ..................... BOLT-ON TYPE
LUBE SYSTEM ...................... BIJUR
COOLANT .......................... YES
WORKHEAD MOTOR ................... 1 HORSEPOWER
HYDRAULIC MOTOR .................. 2 HORSEPOWER
WHEELHEAD/I.D SPINDLE MOTOR ...... 10 HORSEPOWER |
|
Ad # 7680 | Cylindrical Grinders (O.D. & I.D.) |
1977 |
WARNER & SWASEY |
1U-4 |
Very Good |
SOLD |
Photo /
More Info. |
14´´ X 36´´ WARNER & SWASEY UNIVERSAL CYLINDRICAL GRINDER: 14´´ X 36´´ WARNER & SWASEY UNIVERSAL CYLINDRICAL GRINDER
SWING OVER WAYS .................... 14´´
DISTANCE BETWEEN CENTERS ........... 36´´
LONGITUDINAL TABLE TRAVEL .......... 42´´
DIAMETER OF GRINDING WHEEL.......... 14´´
COMBINATION HEAD STOCK
TAPER CONTROL
DROP DOWN INTERNAL GRINDING ATTACHMENT
POWER WORK HEAD
TOOLROOM PRODUCTION DESIGN
1 HORSEPOWER ID MOTOR
5 HORSEPOWER MAIN MOTOR |
|
Ad # 7682 | Cylindrical Grinders (O.D. & I.D.) |
1960 |
BROWN & SHARPE |
4 |
Good |
sold |
Photo /
More Info. |
15´´ X 60´´ BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER: 15´´ X 60´´ BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER
SWING OVER TABLE ................ 14´´
CENTER DISTANCE ................. 60´´
WHEEL SIZE ...................... 14´´ X 1´´ X 5´´
HEADSTOCK SPEED ................. 25 TO 500 RPM
TABLE TRAVERSE SPEED ............ 3 TO 150 IPM
TABLE SWIVELS, BACK............ 6 DEGREES
TABLE SWIVELS, FORWARD .......... 2 - 30 DEGREES
AUTOMATIC INFEED @ REVERSAL ..... .0001´´ TO .003´´
DROP DOWN I.D. SPINDLE .......... YES
COOLANT ......................... YES
ELECTRALIGN TAPER ADJUSTMENT .... YES
SPINDLE MOTOR ................... 1 HORSEPOWER
WHEEL MOTOR ..................... 3 HORSEPOWER |
|
Ad # 7679 | Cylindrical Grinders (O.D. & I.D.) |
|
NORTON |
LU-4 |
Good |
Sold |
Photo /
More Info. |
14´´ X 36´´ NORTON UNIVERSAL CYLINDRICAL GRINDER: 14´´ X 36´´ NORTON UNIVERSAL CYLINDRICAL GRINDER
RATED WORK SWING ..................... 14´´
ACTUAL WORK SWING .................... 15´´
DISTANCE BETWEEN CENTERS ............. 36´´
GRINDING WHEEL SIZE .................. 14´´ X 1-1/2´´ X 5´´
GRINDING WHEEL SPEED ................. 1750 RPM
I.D. SPINDLE SPEED ................... 3400 RPM
WORKHEAD SPEEDS (VARIABLE) ........... 40 TO 400 RPM
SWIVEL WORKHEAD,WHEELHEAD & TABLE .... YES
COOLANT .............................. YES
DWELL ................................ YES
HYDRAULIC MOTOR ...................... 1 HORSEPOWER
WORKHEAD MOTOR ....................... 3/4 HORSEPOWER
GRINDING WHEEL MOTOR ................. 3 HORSEPOWER |
|
Ad # 7681 | Cylindrical Grinders (O.D. & I.D.) |
1950 |
LANDIS |
C |
Good |
Sold |
Photo /
More Info. |
14´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER: 14´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER
SWING OVER BED .......................... 14´´
DISTANCE BETWEEN CENTERS ................ 96´´
HYDRAULIC TABLE TRAVEL .................. 3 TO 144 IPM
VARIABLE SPEED WORKHEAD
DIAMETER OF GRINDING WHEEL .............. 14´´
WIDTH OF WHEEL .......................... 1-1/2´´
BACKREST
COOLANT
3/4 HORSEPOWER VARIABLE SPEED WORKHEAD MOTOR
5 HORSEPOWER WORKHEAD MOTOR
3 HORSEPOWER HYDRAULIC MOTOR |
|
Ad # 13355 | Cylindrical Grinders (O.D. & I.D.) |
1971 |
Danobat |
RE H 500 |
Good |
sold |
Photo /
More Info. |
OD/ID-6" x 18": Danobat ID / OD Grinder
Model RE H 500
auto hyd.Left & Right feed, manual in/out feed
Travels 6" x 18"
New Allen Bradley Control-vari speed inverter
Max wheel Size 12" on a 3" arbor
3 Jaw 6" Chuck
220/3 Volts
new coolant tank & pump
ID spindle needs a new bearings, OD spindle-ok
hyd cylinders rebuilt recently-table feed
new electrical push buttons installed recently |
|
Ad # 9382 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
1R |
Good |
sold |
Photo /
More Info. |
6" X 18" : 6" X 18" LANDIS MODEL 1R, Ltr R PLAIN
CYLINDERICAL GRINDER
Swing Over Table, Nominal 6"
Max grinding diameter 6.875"
Distance beyween centers, Nominal 18"
Grinding wheel diameter, standard 16"
Grinding wheel diameter, Max 3"
Grinding wheel hole diameter 5"
Table swivel taper 4 IPF"
Table swing angle 20 degrees
Table longitudinal feeds, infinite 2 to 240 IPM
Hydraulic Longitudinal Table Feed
Hydraulic Grinding Wheel Infeed
1/4 HP Workhead
Bijur One Shot Lubrication System
Coolant System (Tank & Pump)
|
|
Ad # 9385 | Cylindrical Grinders (O.D. & I.D.) |
|
Farrel |
OD Grinder |
Good |
sold |
Photo /
More Info. |
TRAVELING-HEAD SWING REST ROLL GRINDER, 48"/56" X 378"/440" : FARREL TWO-WHEEL TRAVELING-HEAD SWING REST ROLL GRINDER, 48"/56" X 378"/440... |
|
Ad # 4913 | Cylindrical Grinders (O.D. & I.D.) |
|
Cincinnati |
5U4D5SN-1 |
Good |
SOLD |
Photo /
More Info. |
Universal (ID/OD) Cylindrical Grinder: Just Arrived!!! More information to follow |
|
Ad # 4910 | Cylindrical Grinders (O.D. & I.D.) |
|
BLM |
RC 280 |
Excellent |
Sold |
Photo /
More Info. |
LARGE BLM MADEL RC 280 CRANK SHAFT GRINDER: All Metric machine
10-12" Swing
Distance Between Chuck Faces: 47"
Distance Between Spindle Faces: 50"
Grinding Wheel: 30" diameter
Coolant System
Also Includes:
Workpiece Counter Balance Sets
Grinding Wheel Balancer
Set of Set-Up Precision Gauges
Dual Workheads, each with a 8" chuck |
|
Ad # 7663 | Cylindrical Grinders (O.D. & I.D.) |
1941 |
cincinnati |
1P5D1L-8 |
Good |
Sold |
Photo /
More Info. |
16in x 36in: 16"x36"
3"x30"grinding wheel
20hp |
|
Ad # 10336 | Cylindrical Grinders (O.D. & I.D.) |
1986(?) |
Berco |
RTM351/3000 |
Excellent |
Sold |
Photo /
More Info. |
116 inches length: Specifications Standard Equipment
Max. Dist. Btwn. Chucks: 116.500" / 2960mm
Max. Dist. Btwn. Centers: 118.109" / 3000mm
Max. Swing Over Table: 27.500" / 700mm
Stroke Capacity: 13.375" / 340mm
Grinding Wheel Diameter: 36.000" / 915mm
Machine Weight: 16534 lbs. / 7500 kg
Includes:
Setup Fixture w/Indicator
Wheel Dresser
3 Steady Rests
4 Wheel Hubs & Balancing Arbor
1 Radius Dresser
1 Arnold Grinding Gauge with 3" to 5" foot
and 5" to 8" foot
Miscellaneous Service Tools
|
|