| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 15978 | Surface Grinders |
| 2003 |
Mitsui |
MSG-250MH |
Excellent |
sold |
Photo /
More Info. |
| 8 x 18: Offered for sale is a Mitsui MSG-250MH 8"X18"
surface grinder with Walker magnetic chuck and
Dust-Free wheel guard from a one man shop
This machine is in great condition with low
hours.
I purchased this machine used in 2006 and it
has seen limited use since that time.
Currently wired for 480 three phase, I have
available a transformer to take it to 240
I could possibly load this machine depending
upon your truck or trailer.
Please e-mail for additional information or
pictures.
This sale is part of a complete machine shop
liquidation, please e-mail wants and needs. |
|
| Ad # 14925 | Surface Grinders |
| — |
Taft-Peirce |
5 x 12 linear |
Good |
sold |
Photo /
More Info. |
| 5 x 12" table: Taft-Peirce 5 x 12" manual surface grinder
chuck: perm mag type 5" x 10"
opti wheel dresser unit# I6031133
fine wheel adjust
8" wheel
side light
1 hp spindle motor
std specs below-please verify actual machine
Table work surface 5 x 10 in.
Longitudinal travel 13 ½ in.
Cross travel 6 ½ in.
Vertical travel 10 ½ in.
Grinding wheel size 7 x ½ x 1 ¼ in. hole
Grinding wheel speed 3600 RPM
Floor space 57 x 44 x 71 in.
Approx. weight 1800 lbs.
Motor specs ¾ HP/3/60/220/440
Equipped with:
5 x 10 in. per mag chuck
Fine feeds on cross feed and elevation
note: comes with lots of tooling and acc shown in pictures
|
|
| Ad # 14936 | Surface Grinders |
| 1985? |
Brown & Sharp |
1224 micro master |
Good |
sold |
Photo /
More Info. |
| 12 x 24" semi auto matic: Brown & Sharp # 1224 surface grinder
Hyd: left and right and infeed w/ manual
downfeed
table: 12 x 24"
electro mag chuck: 12 x 24" std pole
fine feed on cross feed
rapid head up/down
RPM: 1800
HP: 5
coolant system
Brown & Sharpe 1224 Micromaster surface
grinder * 12 x 1-1/2 x 3" wheel size * Handles
up to 19" work with 12" wheel
Power wheel truing 10 ipm
Rapid traverse 150 ipm
Rapid vertical 40 ipm
Auto traverse .010-.500"
Longitudinal feed 10-125 fpm |
|
| Ad # 14490 | Surface Grinders |
| 80's |
Arne/Consolidated |
KG-S |
Good |
sold |
Photo /
More Info. |
| knife grinder: 79" x 6.5" max: Arne # KGS knife/blade grinder
chuck size: 81" x 8"
max grinding surface 79" x 6.5"
semi-automatic with manual downfeed
max blade length of blades to grind:
79"
max width of blades ground: 5.5",can change
wheel and get 6.5" width max thickness of
part to be ground: 1"
feed carriage speed: 12.5ft/min
speed of grinding wheel:
1680rpm
motor: 3/4 HP,1680rpm
tilt table +- 45 degrees
coolant pump
mounted wheel dresser
spindle uses a 6"ODx4"ID x 3-1/8" cup
wheel type 2003,A9946,K9V
have manual on PDF for review
technical description: this machine
was
developed for precision grinding of
cutting knives and other parts which can fit in
the clamping area. machine has 3 motors:
grinding wheel drive motor,1 for power carriage
drive traversing and another for coolant
motor.the grinding wheel is assembled directly
onto tthe extended shaft of the wheel motorthats
mounted to the traversing feed
carriage.traversing of the feed carriage is
automatic with the manual setting of the
reversing stops,the drive transmission frpom the
carriage feed motor by v belt to worm gear
box,then to drive sprocket and roller chain.the
grinding wheel is lowered to the knife(or
part)to be ground in a vertical direction with a
manual handwheel,the vernier scale is graduated
into 0.025mm or 0.001" increments.
The grinding angle is set in
rference to horizontal 0deg indicator with a
graduated degree scale on left side of machine
also you can tilt motor/grinding
wheel
centerline by adjusting screw and bracket on
top
of carriage to profide a more hollow ground
knife edge
|
|
| Ad # 13727 | Surface Grinders |
| 52 |
Thompson |
8x24 |
Good |
sold |
Photo /
More Info. |
| —: 8x24 Mag chuck, 14" Wheel, 5HP Motor
Not a good looking grinder but it runs Great! |
|
| Ad # 13003 | Surface Grinders |
| N/A |
Do-All |
D824-12 |
Good |
sold |
Photo /
More Info. |
| Table Size 8"x24": Do-All Hydraulic Surface Grinder
Model D824-12
Voltage 440 3 Phase 60 Cycle
Spindle Model # BD4-2
Max RPM 1725
10"x3/4"x3" Grinding Wheel
8'x24' Table
10"x1" Grinding Wheel
chuck controller is bad |
|
| Ad # 11761 | Surface Grinders |
| — |
Arter |
12 |
Fair |
sold |
Photo /
More Info. |
| Arter rotary: Arter 12" Rotary Surface Grinder
Specifications:
* Chuck Diameter 19''
* Max Chuck Tilt Convex 10 Degree
* Max Tilt Concave 10 Degree
* Chuck Speed 60-250 rpm
* Wheel Speed 1400 rpm
* Wheel Max Diameter 16'' (12" on machine)
* Vertical Capacity Full Wheel 10''
* Power Feed Adjustments 0.0001 to .0018''
|
|
| Ad # 10942 | Surface Grinders |
| — |
RAID |
N2 |
Good |
sold |
Photo /
More Info. |
| RAID N2 Brown And Sharp Chuck: Up for sale is a REID Surface Grinder with 2 Axis
Automatic feed.
Everything works on the machine, ready to use.
Uses 3 Phase 220V.
Comes with grinding wheels and a Magnetic Brown
and Sharp Chuck. |
|
| Ad # 4327 | Surface Grinders |
| 1954 |
boyar schultz |
H612 |
Good |
Sold |
No Photo /
More Info. |
| manual surface grinder H-612: can fax spec. sheet |
|
| Ad # 1588 | Surface Grinders |
| 1959 |
Jones & Shipman |
# 1400 |
Good |
sold |
Photo /
More Info. |
| Jones & Shipman 8" x 24" Surface Grinder: Coolant System
Includes a 8" x 24" Perm Mag Chuck |
|
| Ad # 1560 | Surface Grinders |
| — |
DoAll |
MTA-6 |
Good |
Sold |
Photo /
More Info. |
| Surface Grinder with Crush Grinding Capability: Pick Feed
Coolant System
Powered "in/out"
Boyer & Schultz Spindle |
|
| Ad # 11743 | Surface Grinders |
| — |
Jet |
JSG-612 |
Good |
sold |
Photo /
More Info. |
| 6 x 12 mag chuck: Manual hand operated Surfase Grinder 6 x 12
perm mag chuck, coolant |
|
| Ad # 9818 | Surface Grinders |
| — |
— |
— |
— |
Sold |
Photo /
More Info. |
| 6 X 12 MICRO MASTER: 6 x 12
BROWN & SHARPE MICRO MASTER |
|
| Ad # 4298 | Surface Grinders |
| 1996 |
Not Known?Acer or kent |
12x 24 AH |
Very Good |
Sold |
Photo /
More Info. |
| Hydraulic 12 x 24 Surface Grinder: Includes Electro-magnetic Chuck
Hyd. table feed. |
|
| Ad # 12882 | Surface Grinders |
| 2003? |
Chevalier |
FSG 1224AD |
Good |
sold |
Photo /
More Info. |
| 12" x 24": Chevalier FSG 1224AD Surface Grinder
12" x 24" Magnetic Chuck
Travels 12" x 24"
Max.Distance from Table Surface to Spindle (ins) 24-3/4
Main Motor 5 HP
Longitudinal Movement of Table (ins) 25-5/8
Maximum Travel , Manual (ins) 27-1/2
Rapid Travel - Cross (ipm) 56
Table Speed(Inf Variable (fpm) 16 - 82
Auto Trav Increment (ins) 0.04 - 0.5
Max Auto Transv Travel (ins) 14-1/8
Max Man Transv Travel (ins) 14-1/2
Handwheel / revolution (ins) 0.1"
Handwheel / graduation (ins) 0.0005
Rapid travel (ipm) 13
Wheel Vertical Infeed Automatic (ins) 0.0001 - 0.0002
Micro Downfeed .0001 micro
Microfeed / revolution (ins) 0.01
Standard Grinding Wheel - dia x width x bore (ins) 14 x 2 x 5
|
|
| Ad # 12880 | Surface Grinders |
| 1986 |
LZTK |
URB-1000A |
Good |
sold |
Photo /
More Info. |
| 12" x 40": LZTK Surface Grinder
12" x 40" Magnetic Chuck
over wheel dresser
12" Wheel Max 3" wide
Power X and Y
Year 1986
Voltage 220/3 Phase
|
|
| Ad # 4274 | Surface Grinders |
| — |
Boyar Schultz |
H612 |
Good |
sold |
Photo /
More Info. |
| Boyar Schultz 6" x 12" Ginder: Capacity: 6" x 12"
Table Travel Longitudinal: 13"
Table Travel Horizontal: 7"
Vertical Travel of Spindle: 11 1/2"
Distance to Table Under 7" Wheel: 11 1/2" Max.
Wheel Size: 7" x 1/2" x 1 1/4" Hole
Spindle Speed Approx.: 3200 RPM
Equipped With:
Permanent Mag. Chuck (6" x 12")
Electrical Controls
Cabinet Base
Wheel Guard
Lube System
|
|
| Ad # 9018 | Surface Grinders |
| — |
— |
— |
Excellent |
Sold |
Photo /
More Info. |
| 12 X 24" AUTOMATIC XYZ: IN EXCELLENT SHAPE MADE IN YUGOSLAVIA
|
|
| Ad # 9786 | Surface Grinders |
| — |
— |
— |
— |
Sold |
Photo /
More Info. |
| 6 x 12": 6x 12 " taft pierce |
|
| Ad # 9792 | Surface Grinders |
| — |
— |
— |
— |
Sold |
Photo /
More Info. |
| 24 doall 8 x 24": 8 x 20 |
|
| Ad # 14848 | Surface Grinders |
| 60s |
Gallmyer & Livingston |
No 3 |
Good |
sold |
Photo /
More Info. |
| 8" x 24": Gallmyer & Livingston No 3
Voltage 220/440 wired 220
8" x 24"
Hydraulic Crossfeed
10" Wheel Max |
|
| Ad # 14396 | Surface Grinders |
| early 70 |
Harig |
612 |
Fair |
Sold |
No Photo /
More Info. |
| 6 x 12": harig 6 x 12 manual surface grinder |
|
| Ad # 10832 | Surface Grinders |
| — |
Thompson |
4065230 |
Very Good |
sold |
Photo /
More Info. |
| 24"x 48": THOMPSON 24"X48" SURFACE GRINDER
MODEL NUMBER: 4065230
GE MOTOR
MODEL NUMBER: 5K324D31
HP: 7.5
3 PHASE
VOLTS: 220/440
60 CYCLE
AMPS: 21.2/10.6
RPM: 1160
50 CYCLE
AMPS: 24.6/16.3
RPM: 970
GUSHER PUMP INC.
MODEL: 11019-A
IMP: 5.5
BALDOR INDUSTRIAL MOTOR
3 PHASE
SPEC: 37Q76X75
FR: 21542
HP: 7.5
VOLTS: 208-230/460
AMPS: 21-18.8/9.4
RPM: 3450
60Hz
NEUTROL
MODEL: G-750
VOLTS: 230 DC
AMP: 3.5
850 in 2
|
|
| Ad # 10819 | Surface Grinders |
| — |
Brown & Sharpe |
824 |
Good |
SOLD |
Photo /
More Info. |
| 8"x24": BROWN & SHARPE MICROMASTER SURFACE
GRINDER
MODEL 824
S/N 523-824-530
WORKING SURFACE CAPACITY 8" X 24"
3 HP, 3495 RPM SPINDLE MOTOR
SPLASH PANS
ELECTRICS: 220/440/3/60 MACHINE WIRED 220V
MACHINE EQUIPPED WITH:
8" X 24" PERM. WALKER CERAMAX MAGNETIC
CHUCK
MODEL 7379
SERIAL 770
|
|
| Ad # 10827 | Surface Grinders |
| — |
Brown & Sharpe |
618 |
Good |
SOLD |
Photo /
More Info. |
| 6"x18": BROWN & SHARPE 618 MICROMASTER SURFACE
GRINDER
MODEL 618
S/N 523-6181-9081
WORKING SURFACE CAPACITY 6" X 18"
HEIGHT UNDER 7" DIA. WHEEL 15-1/2"
1.5 HP, 3600 RPM SPINDLE MOTOR
TABLE FEED RATE 5 TO 100 F.P.M.
SPLASH PANS
ELECTRICS: 220/440/3/60 MACHINE WIRED 220V
WEIGHT APPROX. 2450 LBS
MACHINE EQUIPPED WITH:
Neutrofier Control
6" X 18" PERM. HITACHI MAGNETIC CHUCK
Model No.: HU-618
Serial No.: 100010
Work light and cooling tank come with this unit
also.
|
|
| Ad # 10818 | Surface Grinders |
| — |
Brown & Sharpe |
824 |
Good |
SOLD |
Photo /
More Info. |
| 8"x24": 8" x 24"
BROWN & SHARPE MICROMASTER SURFACE
GRINDER
MODEL 824
S/N 523-824-536
WORKING SURFACE CAPACITY 8" X 24"
5 HP, 1740 RPM SPINDLE MOTOR
SPLASH PANS
ELECTRICS: 220/440/3/60 MACHINE WIRED 220V
MACHINE EQUIPPED WITH:
8" X 24" PERM. WALKER CERAMAX MAGNETIC
CHUCK
|
|
| Ad # 10822 | Surface Grinders |
| — |
Brown & Sharpe |
618 |
Good |
SOLD |
Photo /
More Info. |
| 8"x16": BROWN & SHARPE MICROMASTER SURFACE
GRINDER
MODEL 618
S/N 523-6181-236
WORKING SURFACE CAPACITY 6" X 18"
HEIGHT UNDER 7" DIA. WHEEL 15-1/2"
1.5 HP, 3600 RPM SPINDLE MOTOR
TABLE FEED RATE 5 TO 100 F.P.M.
SPLASH PANS
ELECTRICS: 230/480/3/60 MACHINE WIRED 230V
WEIGHT APPROX. 2450 LBS
MACHINE EQUIPPED WITH:
6" X 18" PERM. SELLER MAGNETIC CHUCK
Model No.: 618
Serial No.: 1502-13
|
|
| Ad # 10821 | Surface Grinders |
| — |
Brown & Sharpe |
816 |
Good |
SOLD |
Photo /
More Info. |
| 8"x16": BROWN & SHARPE MICROMASTER SURFACE
GRINDER
MODEL 618
S/N 523-6181-450
WORKING SURFACE CAPACITY 6" X 18"
HEIGHT UNDER 7" DIA. WHEEL 15-1/2"
1.5 HP, 3600 RPM SPINDLE MOTOR
TABLE FEED RATE 5 TO 100 F.P.M.
SPLASH PANS
ELECTRICS: 230/480/3/60 MACHINE WIRED 230V
WEIGHT APPROX. 2450 LBS
HYDRAULIC SYSTEM TANK CAPACITY 15 GALLONS
MACHINE EQUIPPED WITH:
6" X 18" PERM. OS WALKER MAGNETIC CHUCK
|
|
| Ad # 10820 | Surface Grinders |
| — |
Browne & Sharpe |
618 |
Good |
SOLD |
Photo /
More Info. |
| 6"x18": BROWN & SHARPE MICROMASTER SURFACE
GRINDER
MODEL 618
S/N 523-6181-2953
WORKING SURFACE CAPACITY 6" X 18"
HEIGHT UNDER 7" DIA. WHEEL 15-1/2"
1.5 HP, 3600 RPM SPINDLE MOTOR
TABLE FEED RATE 5 TO 100 F.P.M.
SPLASH PANS
ELECTRICS: 230/480/3/60 MACHINE WIRED 230V
WEIGHT APPROX. 2450 LBS
HYDRAULIC SYSTEM TANK CAPACITY 15 GALLONS
MACHINE EQUIPPED WITH:
6" X 18" PERM. OS WALKER MAGNETIC CHUCK
Model No.: 9194-14
|
|
| Ad # 10823 | Surface Grinders |
| — |
Brown & Sharpe |
618 |
Good |
SOLD |
Photo /
More Info. |
| 8"x16": BROWN & SHARPE MICROMASTER SURFACE
GRINDER
MODEL 618
S/N 523-6181-9081
WORKING SURFACE CAPACITY 6" X 18"
HEIGHT UNDER 7" DIA. WHEEL 15-1/2"
1.5 HP, 3600 RPM SPINDLE MOTOR
TABLE FEED RATE 5 TO 100 F.P.M.
SPLASH PANS
ELECTRICS: 230/480/3/60 MACHINE WIRED 230V
WEIGHT APPROX. 2450 LBS
HYDRAULIC SYSTEM TANK CAPACITY 15 GALLONS
MACHINE EQUIPPED WITH:
6" X 18" PERM. WALKER CERAMIX MAGNETIC
CHUCK
Model No.: 7729
Serial No.: 5682
|
|
| Ad # 9743 | Surface Grinders |
| 1956 |
Mattison |
400 |
Good |
Sold |
Photo /
More Info. |
| 24" x 120": 50 HP Mattison Grinder
Manufacturer: Mattison Hanchett
Model: 400
24” x 120” table
Serial Number: 400-2189
Year: 1956 |
|
| Ad # 2132 | Surface Grinders |
| ?? |
Hangchow MT works |
M7130 |
Good |
sold |
Photo /
More Info. |
| 40 x 18 in : 2 Axis Surface grinder: Travels: 40"x,18"y,20"z
Chuck size: 40" x 12" Electro Magnetic
12" dia wheel
4.5KW spindle motor
coolant system
metric dials
0.01mm or 0.0001 in graduation
13" under wheel
manual downfeed
|
|
| Ad # 1353 | Surface Grinders |
| — |
Brown & Sharp |
1024 MicroMaster |
Good |
Sold |
Photo /
More Info. |
| Brown & Sharp 1024 Surface Grinder: 10" Wheel
Includes a 10" x 24" Permanent Magnet Chuck
Htd. cross Feed
Coolant System |
|
| Ad # 13606 | Surface Grinders |
| — |
Do All |
D824-12 |
Good |
sold |
Photo /
More Info. |
| 12" x 24": Do-All Hydraulic Surface Grinder
Model D824-12
Voltage 440 3 Phase 60 Cycle
Spindle Model # BD4-2
Max RPM 1725
10"x3/4"x3" Grinding Wheel
8'x24' Table
10"x1" Grinding Wheel
no coolant tank, has coolant though |
|
| Ad # 11599 | Surface Grinders |
| 1981 |
Okomoto |
PFG-450 |
Good |
sold |
Photo /
More Info. |
| Hyd Long feed 6 x 18: 1981 OKAMOTO PFG-450
HYDRAULIC SURFACE GRINDER
Grinding Capacity (W x L) 6" x 18"
Wheel Size 7" Dia. x 0.5" Thick
Table Size 8" x 20"
Distance Under Wheel 12"
Cross Travel 7"
X-Axis Travel 18.7"
Y-Axis Travel 0.4" to 66' FPM
Table Feed Rate 0.4" - 792 IPM
Auto Cross Feed Increment 0 to 0.250"
Cross Feed Handwheel Grad. 0.001"
Wheelhead Graduations (Coarse/Fine) .0004 / .0001
Grinding Wheel Speed 8000 RPM
Hydraulic Pump Motor 1 HP
Weight 3000 lbs.
FEATURES:
Hydraulic Longitudinal Feed
Power Electric Cross Feed (Continuous & Incremental)
Manual Downfeed of the Grinding Wheelhead, Dual Vertical Feed Mechanism (Coarse & Fine Selections)
Saddle Locking Devise
Walker Magnetic Chuck 6" x 12"
|
|
| Ad # 9719 | Surface Grinders |
| 95 |
okamoto |
pfg-612 |
Excellent |
sold |
Photo /
More Info. |
| 6-12/18: okamoto 6 x 12"manual
ssurface grinder
walker fine pole
electric mag chuck
pump feed oiler
has 6x12 chuck
but can handle 6x18
chuck part
size |
|
| Ad # 9720 | Surface Grinders |
| 86 |
boyer schultz |
h-618 |
Very Good |
sold |
Photo /
More Info. |
| 6x18: 7"wheel
table travel-7x19
1 hpmotor 3450 rpm
handwheel-.0001
hardened ways
auto lube
6x18 perm fine pole chuck
|
|
| Ad # 9721 | Surface Grinders |
| 86 |
okomoto |
pfg612 |
Very Good |
sold |
Photo /
More Info. |
| 6 x12: 6 x 12
pump feed oiler
walker fine pole chuck
accurite quickcount-2 readout |
|
| Ad # 12745 | Surface Grinders |
| — |
Do All |
612 |
Good |
sold |
Photo /
More Info. |
| 6" x 12": Do All Surface grinder
6" x 12"
5" x 10" Chuck
Hydralic X and Y
Coolent Pump |
|
| Ad # 7924 | Surface Grinders |
| — |
Covel |
17H-NRS4-C 10' X 16" Auto/Hyd |
Good |
sold |
Photo /
More Info. |
| 10 x 16 2 axis hyd. automatic: Covel Model NSR4-C---2 axis Automatic/Hydraulic
10" X 16" surface grinder with
Walker Electro-Magnetic LPB fine pole chuck,
one shot lube and coolant.
12 in wheel
manual downfeed
auto long & cross feeds
Longitudinal Travel: 17.5"
Cross Travel: 10.750"
Height Under Wheel: 12"
Wheel Size: 12"x.750"x3"
Wheel Speed: 1750rpm
Hyd. Table Travel: 5-70 FPM
Hyd. Cross Travel: .005-.250 IPM
Center Line Of Spindle: 5.625"-20"
Grinding Wheel Motor: 2 HP
|
|
| Ad # 13543 | Surface Grinders |
| — |
Brown and sharpe |
618 micromaster |
Good |
sold |
Photo /
More Info. |
| 6x18 surface table: 6" X 18" BROWN & SHARPE HYDRAULIC
SURFACE GRINDER
MODEL: 618 MICROMASTER S/N: 523-6181-
5068
WIDTH AND LENGTH GROUND ......................
6"
X 18"
HEIGHT OF WORK GROUND WITH 8"
WHEEL
............... 15"
GRINDING WHEEL SIZE ................ 8" X 1/2" X
1-1/4"
MAXIMUM LONGITUDINAL TRAVEL
....................... 22"
HYDRAULIC POWERED LONG. TABLE
SPEED ..... 5' -
100' FPM
CROSS FEED TRAVEL
.................................. 7"
AUTOMATIC CROSS FEED INCREMENT PER
TABLE PASS ........................... 0.01" TO
.025"
CROSS FEED RAPID TRAVERSE RATE
................
12' FPM
POWER WHEEL TRUING RATE .......................
10" IPM
CROSS HANDWHEEL, GRADUATED TO
READ TO .........
0.0002"
VERTICAL TRAVEL OF SPINDLE ....................
15-3/4"
VERTICAL MOVEMENT OF SPINDLE PER
HANDWHEEL REV...
0.05"
VERTICAL HANDWHEEL, GRADUATED TO
READ TO ......
0.0002"
AUTOMATIC INCREMENTAL DOWNFEED
....... 0.0002" TO
.003"
APPROXIMATE MACHINE WEIGHT ..................
3,500 LBS
EQUIPPED WITH:
AUTOMATIC INCREMENTAL DOWNFEED @
EACH TABLE
REVERSAL
POSITIVE STOP ALLOWS TERMINATION OF
THE FEED AT
ANY
DESIRED DEPTH UP TO 0.045".
HYDRAULIC LONGITUDINAL AND CROSS
FEEDS
SELF-CONTAINED HYDRAULIC SYSTEM
6" X 18" B & S "MICRO-MESH" ULTRA-FINE
DIVISION
PERMANENT MAGNETIC CHUCK
B & S COOLANT SYSTEM COMPLETE
W/TANK, PUMP, SPLASH
GUARDS
& PIPING
1 H.P./3/60/220-440 VOLT B & S SPINDLE
3/60/230-460 VOLT ELECTRICS
|
|
| Ad # 12732 | Surface Grinders |
| — |
Harig |
Super 618 |
Good |
sold |
Photo /
More Info. |
| 6" x 18": Harig Suface Grinder
1 HP
6" x 18" Walker Permanent Magnetic Chuck
|
|
| Ad # 12730 | Surface Grinders |
| — |
Challenger |
H618 |
Good |
sold |
Photo /
More Info. |
| 6" x 18": Challenger Surface grinder
1 Hp
Voltage 220/440 3 Phase Wired 220
6" x 18" Walker Permanent Magnetic Chuck |
|
| Ad # 12731 | Surface Grinders |
| — |
Chevalier |
FSG-618M |
Good |
sold |
Photo /
More Info. |
| 6" x 18": Chevalier Surface Grinder
2 HP
Voltage 220/440 3 Phase. Wired 220
Kin Jung Permanent Magnetic Chuck |
|
| Ad # 5301 | Surface Grinders |
| 1993 |
JONES & SHIPMAN |
8 x FORMAT 5/200 |
Very Good |
Sold |
Photo /
More Info. |
| 8" X 24" JONES & SHIPMAN CNC SURFACE GRINDER: WORKING SURFACE OF TABLE ------ 8" X 24"
LONGITUDINAL TRAVERSE ( HYDR./HAND ) ------ 25/26"
TABLE CROSS TRAVERSE ----------------------
DISTANCE WHEEL TO TABLE, MAX. ------------- 15.4"
TABLE JOG RATE --------------------- 3 - 20 FPM
WHEEL SIZE, STANDARD -------------- 10" X 1" X 3"
GRINDING WHEEL SPEED ------------ 2,640 RPM
MINIMUM PROGRAMMABLE CROSSFEED INCREMENT -- .0001"
MINIMUM PROGRAMMABLE WHEELHEAD INCREMENT -- .0001"
WHEELHEAD AND CROSSFEED RATES -- .006 TP .120 IPM
WHEELHEAD MOTOR ----------------- 3 HP A.C.
EQUIPPED WITH ---
ALLEN BRADLEY 8600 CNC CONTROL
D.C. SERVO MOTOR DRIVEN BALLSCREWS WITH LINEAR SCALE FEEDBACK ( Y & Z AXES )
USER FRIENDLY DISPLAYS OF GRINDING AND DRESSING CYCLES
BALL BEARING WHEELHEAD
BALL AND ROLLER SLIDE WHEELHEAD ASSEMBLY
8" X 24" WALKER FINE LINE ELECTRO MAGNETIC CHUCK AND WALKER VARIABLE CONTROL
TABLE MOUNTED FLIP-UP DRESSER
COOLANT SYSTEM
|
|
| Ad # 12713 | Surface Grinders |
| 1989 |
Brown and Sharp |
618 |
Good |
sold |
Photo /
More Info. |
| 6 x 18: 6 x 18 capacity
magnetic chuck
|
|
| Ad # 6687 | Surface Grinders |
| 1967 |
ELB |
SWD 20 VA II-U |
Good |
Sold |
Photo /
More Info. |
| 29” x 79” ELB High Precision Surface Grinder, Model SWD VA II-U: 29” x 79” ELB High Precision Surface Grinder with Auto. Incremental Downfee... |
|
| Ad # 6682 | Surface Grinders |
| 1991 |
CHEVALIER |
FSG 1640 AD |
Excellent |
Sold |
Photo /
More Info. |
| 16” x 40” FSG 1640 AD CHEVALIER 3-axis Hydraulic Surface Grinder: 16” x 40” FSG 1640 AD CHEVALIER 3-axis Hydraulic Surface Grinder
Table size 15 ¾” x 39 3/8”
Max. grinding length 40”
Max. grinding width 16”
Max. distance from table to spindle center line 24 3/8”
Table longitudinal travel(hydraulic) 41 5/16”
Table longitudinal travel(manual) 43 ¼”
Table speed, infinitely variable 16-82 FPM
Rapid traverse cross travel 12 FPM
Automatic cross travel increment 1/8”-2”
Max. automatic cross travel 16”
Max. manual cross travel 18”
Cross travel hand wheel per revolution 0.25”
Hand wheel per graduation 0.0025”
Micro cross feed per revolution 0.005”
Micro cross feed per graduation 0.00005”
Automatic down feed of wheel 0.00005”-0.002”
Vertical hand wheel feed per revolution 0.05”
Vertical hand wheel feed per graduation 0.0005”
Vertical micro feed 0.00005”/0.0001”
Vertical rapid traverse rate 8 FPM
Standard wheel size 14”x2”x5”
EQUIPPED WITH:
15 ¾” x 39 3/8” electromagnetic chuck
Over-the-wheel dresser
1-axis Sokki Digital readout
Work light
Wheel mount w/wheel
Hydraulic unit
Magnetic coolant Separator
5 H.P. GPD503 Magnetek AC
inverter spindle drive |
|
| Ad # 6681 | Surface Grinders |
| 1997 |
KENT |
KGS-63SD1 |
Excellent |
Sold |
Photo /
More Info. |
| 12" x 24" KENT Hydraulic Surface Grinder, Model KGS-63SD1: 12" x 24" KENT Hydraulic Surface Grinder, Model KGS-63SD1
Capacity:
Overall table working area (width x length) 11.81" x 25.59"
Longitudinal table travel 27.95"
Cross table travel 13.39"
Maximum table load (with chuck) 550 Lbs.
Maximum/Minimum distance between working table 21.25"/4.72"
and spindle center
Table Cross Feed:
Longitudinal table speed 8 to 100 F.P.M.
Cross feed hand wheel is graduated in increments of .0001"
Automatic cross feed per stroke of table .02" to .4"
Grinding Wheel:
Standard wheel dimensions 14" diameter x 1.5" maximum
Width x 5" bore
Spindle speed 1,740 R.P.M.
Downfeed:
Automatic down feed increment 0.0001" to .004"
Downfeed hand wheel is graduated in increments of .0001"
Downfeed travel per revolution of hand wheel .02"
EQUIPPED WITH:
Hydraulically actuated longitudinal feed
Electromechanically actuated cross feed
Automatic incremental downfeed of grinding wheel head driven by stepping motor
Programmable logic controller (PLC) of all machine functions including: "Rough
Downfeed" increment and number of passes, "Fine Downfeed" increment and
number of passes, "Sparkout" times, "Downfeed Mode" for control of incremental
downfeed with table at right end of stroke, left end of stroke, or both left and right
end of stroke, "Wheel head Elevation & Position" for control of elevation increment
at completion of grinding job, "Jog" increment to allow the operator to select three
different jog rates of the grinding wheel head, and "Reset" to set the current position
of the grinding wheel as 0 point The PLC has a LED display to show the position
of the grinding wheel in relation to the starting point.
Selector switch for surface or plunge grinding modes of operation
Selector switch for automatic incremental downfeed, downward jogging, or power
rapid elevation of grinding wheel head
12" x 23-5/8" Fine division electromagntetic chuck with console mounted controls
including: variable magnetic strength, magnetization/demagnetization mode
selector, and voltage gauge meter
Over-the-wheel parallel dresser
External hydraulic pump and tank
External coolant pump and tank with paper band filtration
5 H.P. 3/60/575 volt spindle drive motor |
|
| Ad # 6684 | Surface Grinders |
| 1980 |
BLOHM |
HFS-512 |
Excellent |
SOLD |
Photo /
More Info. |
| 22" x 48" BLOHM Hydraulic Surface Grinder Model HFS-512: 22" x 48" BLOHM Hydraulic Surface Grinding Machine with Automatic Increment... |
|
| Ad # 6680 | Surface Grinders |
| 1986 |
CLAUSING JAKOBSEN |
SJ1032 |
Very Good |
Sold |
Photo /
More Info. |
| 10" x 32" CLAUSING JAKOBSEN Hydraulic Surface Grinder, Model SJ-1032: 10" x 32" CLAUSING JAKOBSEN Hydraulic Surface Grinder with Automatic
Incremental Downfeed, Model SJ-1032
Work capacity 11.81" x 31.5"
Longitudinal travel of table 35.43"
Cross travel of table 12.2"
Maximum height, spindle center to table 21.65"
Working surface of table 9.84" x 31.5"
Table longitudinal feed rate, infinitely variable 7.9 to 119 F.P.M.
Automatic cross feed at saddle reversal, .079" to 1.19"
infinitely variable
Automatic vertical feed range, infinitely variable .0001" to .0099"
Rapid cross feed rate 240 I.P.M.
Rapid vertical feed rate 12 I.P.M.
Vertical feed hand wheel reads to .0001"
One revolution of vertical feed hand wheel equals .01"
Fine cross feed knob reads to .0001"
Maximum table load 660 Lbs.
Standard wheel size 14" diameter x 1.57" wide
Grinding wheel speed 1,700 R.P.M.
EQUIPPED WITH:
Hydraulically actuated longitudinal feed
Rack and pinion longitudinal table drive during manual operation
Hydraulically actuated continuous or intermittent cross feed
Fine adjustment cross feed knob graduated to .0001"
Double saddle locking device
Automatic incremental down feed actuated through stepping motor at each reversal of
the saddle for plunge or slot grinding or at each reversal of table for surface
grinding. Down feed travel is digitally displayed counting back to zero.
Digital display of every .01" movement of down feed hand wheel in both directions. This
system works independently of the automatic down feed.
1/2 H.P. motorized rapid vertical feed up and down of grinding wheel head
Hydraulically actuated wheel dresser mounted on top to the wheel spindle permitting
straight line dressing of wheels up to 1" wide
10" x 32" O.S WALKER "Interlock" electromagnetic chuck with control (The
Interlock chuck is designed for very low heat emission and thus is used for very
high precision grinding).
Operation and spare parts manuals
(1) Wheel mount
Automatic lubrication system
External coolant pump and tank
3 H.P. external hydraulic pump and tank
5.5 H.P. spindle drive motor and electrical controls |
|
| Ad # 6685 | Surface Grinders |
| 1960 |
THOMPSON |
Model C |
Good |
Sold |
Photo /
More Info. |
| 24” x 28” x 72” THOMPSON Hydraulic surface grinder, Model C: 24” x 28” x 72” THOMPSON Hydraulic surface grinder, Model C
Capacity 24” x 72”chuck size
no incremental downfeed
Max. height above table with new wheel 28”
Wheel size 20”x6”x12”
Table speed range 10-100 FPM
Hydraulic cross feed 1/32” to half wheel width
EQUIPPED WITH:
24” x 72” Electromagnetic chuck with
neutrofier control
12” extra column height
Wheel dresser
(1) wheel mount
Automatic lubrication
Rapid traverse to wheel head
Splash guards
Coolant system
Hydraulic power unit
15 H.P. 3/60/220-440 volt spindle drive
motor with controls |
|
| Ad # 6676 | Surface Grinders |
| 1966 |
FAVRETTO |
RT 60 |
Good |
Sold |
Photo /
More Info. |
| 23" FAVRETTO Column-type horiz. spindle rotary surface grinder, RT 60: 23" FAVRETTO Column-type horizontal spindle rotary surface grinder, RT 60
Diameter of rotating table 23 5/8"
Maximum swing inside of water guards 28"
Maximum wheel head traverse 9 1/2"
Maximum/minimum distance from table to wheel center 16 1/2"/7"
Angle of head swivel for conical grinding 10° either side of zero
Grinding wheel size 14" dia. x 1 1/4" face x 5" bore
Grinding wheel speed 1,400 RPM
Grinding wheel continuous cross feed,
infinitely variable 8 to 236 I.P.M.
Grinding wheel vertical feed .0002" to .00157"
Table speeds, infinitely variable to 120 RPM
EQUIPPED WITH:
Vertical column type construction
23 5/8" diameter electromagnetic chuck with RELIANCE variable speed controller and ELECTROMATIC PRODUCTS CO. Neutrol rectifier
Electro-hydraulically actuated automatic micrometer down-feed of grinding wheel head at each cross feed reversal
Electro-mechanically actuated power rapid traverse of grinding wheel head vertical travel
Hydraulically actuated power rapid cross feed of wheel head assembly
Over-the-wheel diamond dresser with micrometer adjustment
BIJUR lubrication system
Self-contained coolant system with 1/4 H.P. drive motor
Self-contained hydraulic system with 1 1/2 H.P. drive motor
1 H.P. vertical rapid traverse motor
2 H.P. table drive motor
5 H.P. 3/60/220-440 volt spindle drive motor and electrical controls |
|
| Ad # 15339 | Surface Grinders |
| — |
Kikinda |
URB-1000A |
Excellent |
sold |
Photo /
More Info. |
| 12" x 40": Brand: Kikinda
Model: URB-1000A
Hydraulic Surface Grinder With Automatic
Incremental
Downfeed
•Work table area 11.8" x 59"
•Maximum grinding length 39.4"
•Maximum grinding width 11.8"
•Maximum distance from centerline of spindle
to top work
table 19.7"
•Maximum longitudinal travel of table at
maximum speed
40.2"
•Maximum cross travel of work table 11.8"
•Cross feed range .08" to .800"
•Table speed range, longitudinal 3.28 to 82
F.P.M.
•Grinding wheel size 11.8" diameter x 2"
wide
x 5" bore
•Grinding wheel speed 1,500 R.P.M.
•Downfeed handwheel graduated in increments
to .0004"
•Fine downfeed adjustment in increments of
.00008"
•Automatic incremental downfeed rate.0002"
to
.0008" |
|
| Ad # 7890 | Surface Grinders |
| 80's? |
Harig |
67214HJ811 |
Very Good |
sold |
Photo /
More Info. |
| Harig 6" x 12" Manual surface grinder: special teflon ways
no chuck
1HP
very good shape |
|
| Ad # 7891 | Surface Grinders |
| ?? |
Parker Majestic |
6 x 18" |
Excellent |
sold |
Photo /
More Info. |
| Parker Majestic manual 6" x 18" surface grinder: 1HP
digital readout-single axis
perm mag chuck 6" x 18"
|
|
| Ad # 5275 | Surface Grinders |
| 1952 |
Thompson |
12 x 30 |
Good |
SOLD |
Photo /
More Info. |
| Heavy Duty 12" x 30" Table Thompson Surface Grinder: Table: 12" x 30
11" dia Grinding Wheel
Intergrated Coolant System
Includes the 25.5" x 12.5" Perm. Mag Chuck |
|
| Ad # 13521 | Surface Grinders |
| 1967?? |
Thompson |
2448 |
Good |
sold |
Photo /
More Info. |
| 24" x 48" : Thompson Surface Grinder
power downfeed not automatic on rapid
feed
travels 24" x 48" x 18"
Max Wheel Dia. 20"
Voltage 220/440 wired 220
Wheel Dresser
O.S. Walker Magnetic Chuck 24" x 48"
Coolent Tank
|
|
| Ad # 5263 | Surface Grinders |
| — |
Brown & Sharpe |
No. 2 |
Fair |
sold |
Photo /
More Info. |
| Brown & Sharpe Grinder, Magnetic Table: Mag. Table measures 5-1/2"x10-1/2"
Takes a 6" wheel |
|
| Ad # 6612 | Surface Grinders |
| 1978 |
GALLMEYER & LIVINGSTON |
550 |
Very Good |
sold |
Photo /
More Info. |
| 12" X 36" GALLMEYER & LIVINGSTON MODEL 550 HYDRAULIC SURFACE GRINDER: USED 12" X 36" GALLMEYER & LIVINGSTON MODEL 550
HYDRAULIC SURFACE GRINDER
CAPACITY: 12" WIDTH
18" HEIGHT
36" LENGTH
TABLE TRAVEL, LONGITUDINAL: 47-1/2"
TABLE TRAVEL, TRANSVERSE: 13-3/4"
WORKING SURFACE OF TABLE: 12" X 36"
VERTICAL MOVEMENT OF WHEELHEAD: 19"
STANDARD WHEEL SIZE: 14" X 1-1/2" X 5"
MAX. DISTANCE WHEEL TO TABLE WITH NEW WHEEL: 18"
SPINDLE SPEEDS: 1750 & 2100 RPM
MOTORS: 7-1/2 HP SPINDLE
3 HP HYDRAULIC
EQUIPPED WITH:
POWER INCREMENTAL DOWNFEED
POWER WHEELHEAD ELEVATION
12" X 36" ELECTROMATIC CHUCK W/CONTROLS
COOLANT SYSTEM
PUSH BUTTON CONTROL STATION
WHEEL DRESSER
SPLASH GUARDS
AUTOMATIC LUBRICATION |
|
| Ad # 15330 | Surface Grinders |
| 1990's |
Chevalier |
FSG-2440TX |
Excellent |
sold |
Photo /
More Info. |
| 24 x 40: Chevalier Surface Grinder
Model: FSG-2440TX
Age: Circa Early 1990's
Size: 24 x 40
Wheel Diameter: 16"
Walker Magnetic Chuck
Coolant tank with paper filter
Manuals available
Main Machine (dimension and weight straight
out of
machine manual):
...Dimensions: 180" Long x 134" Wide x 108"
Tall
...Weight: 15,000 lbs
Filter (separate):
...Dimensions: 5.5' x 4.5'
...Weight: 100 lbs (estimated)
Hydraulic Power Unit:
...Dimensions: 3' x 6'
...Weight: 200 lbs (estimated)
Rigging (moving out of building and loading
on Buyer's
truck): $2,660
These videos were taken in the current
owner's shop
on 5/31/16 showing the spindle turning and
the
machine moving in X, Y, and Z. Machine is in
excellent
working condition:
Video Link #1:
https://www.youtube.com/watch?
v=khM8zQcDeSM
Video Link #2:
https://www.youtube.com/watch?
v=zJ7GbeNy2Aw
Machine is under power; equipment available
for
inspection.
Buyer responsible for freight logistics and
expenses.
Seller agrees to load equipment on Buyer's
truck.
Fee may be charged for rigging.
Buyer to verify all specifications and
options of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
| Ad # 7877 | Surface Grinders |
| — |
DoAll |
D-6 |
Good |
SOLD |
Photo /
More Info. |
| 6' x 18" DoAll Hydraulic Surface Grinder with Magnetic Chuck: Mag Chuck: 6" x 18" (Walker)
Mag Chuck: Manually operated
Coolant System |
|
| Ad # 14270 | Surface Grinders |
| 1975 |
Gallmeyer & Livingston |
570 |
Good |
sold |
Photo /
More Info. |
| 16" x 36": Gallmeyer and Livingston Surface Grinder
electro-Matic 16" x 36" Power Chuck
Power down Feed Visamatic II
Wheel Dresser
Model 570
Year 1975
Voltage 220/3 Phase
|
|
| Ad # 6593 | Surface Grinders |
| — |
Simonds |
84HF752V3--- |
Very Good |
Sold |
Photo /
More Info. |
| 84" Straight Knife Grinder: Max: Grinding Length: 84"
Spindle Power: 10 hp
Coolant System with pumps etc
Auto Reciprocating Feed
Auto Cut Feed (Into workpiece)
Angle manually set and adjusted |
|
| Ad # 10631 | Surface Grinders |
| — |
Winona Van Norman |
BG1520 |
Fair |
Sold |
Photo /
More Info. |
| Head and Block Sander: 18 x 43: Maximum working surface
18" x 43", Automatic Clamping,
15 HP motor,
IDL Metal Belt Sander |
|
| Ad # 5211 | Surface Grinders |
| 1990 |
— |
— |
— |
Sold |
Photo /
More Info. |
| 12"x 24" AMW GS1224BH Surface Grinder, S/N-B10351-2 : Specifications:
Longitudinal Travel 28"
Cross Travel 13"
Vertical Travel 15"
Max Distance Spindle to Table 20"
Wheel Size 12" x 1"x 3" Hole
Longitudinal Feed Hydraulic, Variable
Cross Feed Electronic Step, Variable
Vertical Feed Computerized Step or Plunge, Programable
Vertical Fine Feed .0001" Graduations
Electromagnetic Chuck 12"x 24" Fine-Line with Rectifier
Electrics 220 V 3Ph 60C
Floorspace Required 112" x 66" x 80" Ht
Weight 5000 Lbs., Approximate
|
|
| Ad # 5209 | Surface Grinders |
| 1982 |
CHEVALIER |
FSG-618 |
Good |
sold |
Photo /
More Info. |
| 6"x 18" CHEVALIER FSG-618 Hand Feed Surface Grinder, S/N-02-3358, with: Specifications:
Longitudinal Travel 18"
Cross Travel 6"
Vertical Travel 16"
Max Distance Spindle to Table 17-1/2"
Wheel Size 8"x 3/4"x 1-1/4"
Type of Feeds Hand Feed Only
Spindle Speed 3440 RPM
Cross Dial Graduations 0.0005" Divisions
Vertical Dial Graduations 0.0001" Divisions
Motor(s) 1HP 220/440V 3Ph 3440RPM
Chuck 6"x 12" WALKER Electromagnetic with Fine Line Longitudinal Poles, No Rectifier
Accessories Included Ball Bearing Table Ways, One-Shot Lubrication, DRO scale on Cross Slide (Display is missing)
|
|
| Ad # 5210 | Surface Grinders |
| 1989 |
— |
618 |
Very Good |
Sold |
Photo /
More Info. |
| 6"x 18" HARIG Hand Feed Surface Grinder, S/N-7235-W, Walker PM Chuck, : Specifications:
Longitudinal Travel 20"
Cross Travel 6-3/4"
Vertical Working Height 11-3/4" (Under 7" Wheel)
Platen Working Area 6"x 18"
Wheel Size 7"x 1/2"x 1-1/4"
Maximum Wheel Size 8"x 1-1/4"x 1-1/4"
Spindle Speed 3425 RPM
Cross Dial Graduations .001"
Vertical Dial Graduations .0001"
Motor(s) 1-1/2HP 208-230/460V 3Ph 60C
Dimensions 39"F-B x 49"L-R x 78"Ht
Equipped With
1-Axis DRO,
WALKER 6"x18" Ceramax Magnetic Chuck,
Automatic Lube |
|
| Ad # 8745 | Surface Grinders |
| — |
Okomoto |
L6-12/14 |
Excellent |
sold |
Photo /
More Info. |
| 6 x 12: perm mag 6 x 12 chuck
up to 8" wheel x 1" wide
sony readout
manual lube
high speed grinding acc included |
|
| Ad # 12617 | Surface Grinders |
| — |
DoAll |
VS 618-3 |
Good |
sold |
Photo /
More Info. |
| —: This surface grinder includes a Franklin hydraulic
pump.
Freight costs will be extra or freight collect is
acceptable. Thank you |
|
| Ad # 12618 | Surface Grinders |
| — |
Gardner |
1 1/2 |
Excellent |
sold |
Photo /
More Info. |
| —: Excellent condition, magnetic table, and functioning lighting
Freight costs are extra, or freight collect is acceptable |
|
| Ad # 15579 | Surface Grinders |
| 1987 |
Brown and Sharp |
612 Value Master |
Excellent |
sold |
Photo /
More Info. |
| mid: This machine has only been used a few times. And
has been maintained and almost new condition. |
|
| Ad # 10598 | Surface Grinders |
| — |
DoAll |
824-12 |
Good |
Sold |
Photo /
More Info. |
| 8 x 24: DoAll 824-12 Hydraulic surface grinder.
12" wheel, remote coolant, Auto cross feed and down feed. S/N 222-66156
Table Size: 81/2 x 24 in
Table Travel: 10 x 26 in
Table Speed: 5 to 125 fpm
Table movement per revolution of
manual handwheel: 2-3/8 in
Chuck size: 8 x 24 in
Wheel size: 12 x 1 x 3 in
Work height (table to wheel) 15 in
Crossfeed automatic, increments: 0 to .250 in
Crossfeed wheel dress: 0 – 150 ipm
Crossfeed reference graduations: .0002 in
Crossfeed, manual, per revolution of
handwheel: .100 in
Downfeed reference graduations: .0001 in
Downfeed adjustment per revolution
of manual handwheel: .050 in
Column riser motor: ¼ hp
Spindle motor: 5 hp
Spindle drive: V- Belt
Spindle speed: 2000 rpm
Hydraulically – actuated lubrication to table, saddle and column ways, crossfeed, and elevating screw.
Dimensions 90” x 67-1/8” x 75” (W x D x H )
Shipping weight: 4900 #
Includes a Unision Dedtru Model C Precision Centerless Grinding Unit S/N: 2625
|
|
| Ad # 15828 | Surface Grinders |
| — |
Harig |
612 Hydraulic |
Good |
sold |
Photo /
More Info. |
| 6 x 12 hyd -semi automatic w/vari speed: Harig 612 Hydraulic-semi automatic surface grinder
hyd. feed left to right..
z&y axis manual feed in/out & up/down
vari speed spindle inverter drive
digital readout on Y axis in/out feed -Acurite-could easly move scale to z axis
note:comes with a few spare grinding wheels
pneumatic clamp fixture included for holding non ferrous parts
optional: micro fine manual feed on in/out feed on table Y axis
chuck: Walker fine pole perm mag..
vac system-drum type
1.5 hp motor wired 208/3
|
|
| Ad # 15827 | Surface Grinders |
| 1982? |
Boyer-Schultz |
Challenger:H612 |
Good |
sold |
Photo /
More Info. |
| 6" x 12" manual hand feed: Boyer-Schultz #Challenger:H612
Hand manual feed ,rack & pinion drive
surface grinder 6" x 12"travels
Height Under 7” Wheel 12”,Longitudinal 13-7/8",cross 6-13/16"travels
wheel speed: 2450 rpm
Walker 6 x 12 fine pole perm magnetic chuck.
Handwheel graduation downfeed .0005",
Handwheel graduation crossfeed .001",
Grinding Wheel Capacity 7" X 5/8" X 1-1/4".
work light
lube unit
dry grinding set up
wheel & long. stop wrenches,several spare wheels & Acc included shown..
Note: very nice precision grinder..best of class! |
|
current group
groups previously viewed
groups not yet viewed
