| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10709 | Tool & Cutter Grinders |
| 1987 |
Tool & Cutter |
— |
Very Good |
SOLD |
Photo /
More Info. |
| —: — |
|
| Ad # 10508 | Tool & Cutter Grinders |
| — |
Technica |
ZSM 159 |
Good |
sold |
Photo /
More Info. |
| Technica Center Grinder Model ZSM 150: Technica Center Grinder Model ZSM 150
Max. work piece length 42"
Min. work piece length 2"
Tailstock center height to guide way 5.7"
Tailstock center height to slide(vise) 2.6"
Max. dia. of ground center hole mouth .08"
Grinding spindle speeds 45,000/22,500
-13,000RPM
Hollow spindle speed 400RPM
Dia. of grinding cone .6" ,1.06",1.6"
Machine weight 1,000lbs
|
|
| Ad # 10503 | Tool & Cutter Grinders |
| — |
Holroyd |
24" |
Very Good |
sold |
Photo /
More Info. |
| Holroyd Model 24'' Profile Grinder: Holroyd Profile Grinder
New: S/N #16429
Max Dia of Cutter 24''
Diameter of Grinding Wheel 7''
Width of Grinding Wheel 1/16''
Speed of Grinding Wheel 2800 RPM
HP of Motor 1/4 HP
Floor Space Requirements 3' 6'' x 4' 0''
Machine Equipped With
* Books/Manuals
|
|
| Ad # 1707 | Tool & Cutter Grinders |
| — |
TDR |
— |
Very Good |
SOLD |
Photo /
More Info. |
| Precision Drill Grinder: For sharpening drills from 1/16" to 3/4" diameter
light |
|
| Ad # 15628 | Tool & Cutter Grinders |
| — |
cincinnati |
#1 |
Good |
sold |
Photo /
More Info. |
| —: good operating condition. hasn't been used for approximately
6
years. working when shut down. |
|
| Ad # 6350 | Tool & Cutter Grinders |
| 2001 |
ITM |
MSG3-12 |
Good |
sold |
No Photo /
More Info. |
| —: — |
|
| Ad # 15969 | Tool & Cutter Grinders |
| 1996? |
K.O.Lee |
B2062H |
Good |
sold |
Photo /
More Info. |
| table size:5-1/4" x 37-1/4": KO Lee B2062H #tool & cutter grinder
dtocks:32"
distance between centers in workhead
and tailstock:26"
table size:5-1/4" x 37-1/4"
sub table:8 x 48"
cross movement:7-1/4"
table traverse"20"
vert column movement:7"
column dia:4"
mores specs
at:http://vintagemachinery.org/pubs/1738/6596.pd
f
|
|
| Ad # 6599 | Tool & Cutter Grinders |
| — |
Union Twist Drill |
— |
Fair |
SOLD |
Photo /
More Info. |
| Drill Sharpener for Large Diameter Drills : Swivel Head
Variable Speed Wheelhead Drive
Vertical Slide for height setting
Swivel/rotate Tailstock/tool support
Simplified Tool Holding device
Manual Infeed (via lever)
Coolant system |
|
| Ad # 2499 | Tool & Cutter Grinders |
| 1940 |
NORTON |
— |
Good |
sold |
Photo /
More Info. |
| NORTON #2 TOOL AND CUTTER GRINDER: Swing over table (diameter) 12
Length, between right & left-hand tailstocks (max) 27"
Working surface of table 5.25X36"
Longitudinal movement of table 15.75"
Cross movement of table 10"
Cross range gained by swivel table 3-1/2"
Total extended cross range 17"
Table swivels 180 deg.
Table graduations in center, in degrees 90 deg.
Swivel movement of grinding wheel spindle 360 deg.
1 HP 3600 RPM Wheel head
Electrical controls
|
|
| Ad # 15683 | Tool & Cutter Grinders |
| 2008 |
Rush Machinery |
250A |
Good |
sold |
Photo /
More Info. |
| 3/32″ to 2″ : Rush machinery # 250A
drill & cutter
grinder capacity of
3/32″ to 2″ diameter.
The Model 250A
has a 2:1 ratio only.
All models use
hardened cams
and the
cam change takes
only
5 seconds. When
no
cam is in place,
the
workhead can be
used
to spin grind or
index grind (12
positions). The
Model
250A
incorporates a
wide capacity
and
versatility in
an
affordable
package.
The innovative
design
of the Model
250A
allows for the
grinding of
almost
any drill
geometry,
and most are
completed in a
single
chucking. The
versatility also
extends to taps,
reamers,
countersinks
and end mills.
Many
of these tools
can be
ground with very
little change in
set-
up. |
|
| Ad # 11688 | Tool & Cutter Grinders |
| 1990 |
Nachi-Fujikoshi |
NBS 63D |
Very Good |
sold |
Photo /
More Info. |
| Nachi ---Broach Grinder: 1990 Nachi-Fujikoshi
broach grinder # NBS63D
Designed for diamond wheels (one included)
Magnetic Chuck: 36" x 5"
Variable speed grinding head
Swivel Grinding Head
Swivel "Y" Axis
no attachments included
Nachi NBS 63D Broach Grinder
Max grinding outside diameter 6"
Max broach length 59"
Max grinding height 8"
Wheel spindle RPM 3,600
T-slotted table 12"x 90"
Magnetic Chuck 36" x 4-1/2"
Head rotation 0-90 degrees
Floor space 14' x 5'
Weight 6,200 lbs
Electrical 230/3 phase
rigging fee to load machine onto truck: $ 800.00 |
|
| Ad # 9478 | Tool & Cutter Grinders |
| 1994 ? |
Oliver-Adrian |
PT |
Good |
sold |
Photo /
More Info. |
| 3/8-3" Drill web Thinner machine: designed to thin webs of drill bits
Drill bit web thinner
3/8"-3" capacity |
|
| Ad # 15822 | Tool & Cutter Grinders |
| 1995? |
Darex |
E-90 |
Good |
SOLD |
Photo /
More Info. |
| end mill sharpner: Darex E-90 End Mill Sharpener
comes complete
including these standard items:
• Set of 6 Ultra precision collets (3/16, 3/8, 1/2, 5/8, 3/4 and 1")
• CBN (Borazon) grinding wheel
dust cover
plus spare acc shown in pix
std mfg machine specs below-please verify actual machines:
#E90 DAREX END MILL SHARPENER AND GRINDER
MODEL E90,
Spec No 34P12W371 W7-89
EQUIPPED WITH:
Radius Attachment
Extra Wheels
Stand - Lamp
CATALOFUE SPECIFICATIONS:
Cutting Tool Diameter, Range........... 1/16" to 1"
Shank Diameter Sharpened............... 3/16" to 1"
Shank Capacity, Flute Diameter......... 2"
Point Styles Sharpened, Flutes......... 2, 3, 4, & 6 HSS
Motor Horsepower....................... 1/4 HP/3400 RPM
Electrical System...................... 115/1/60
Machine Size 17.5" x 17.5"
Machine Height......................... 10.75"
Machine Weight......................... 72 LBS
NOTE: This Machine Quickly And Easily Sharpens A
Wide Range Of End Mills Including Cobalt And
Carbide End Mills. It Will Renew End Mills With
Up To 1" In Diameter And 6" Flute Length And
Easily Sharpen Long Flute End Mills. A Sharp
End Mill Will Allow Maximum Machining Rates As
Well As Generating Less Heat In The Process. |
|
| Ad # 7631 | Tool & Cutter Grinders |
| — |
Grenby |
# 2 Size? |
Fair |
sold |
Photo /
More Info. |
| Grenby Universal Tool and Cutter Grinder (# 2 size?): Would make a nice general purpose machine once dusted off and cleaned up |
|
| Ad # 11758 | Tool & Cutter Grinders |
| 2000 |
Rush |
382S |
Excellent |
sold |
Photo /
More Info. |
| drill /mill sharpner: Model 382S
S/N 2443
year 2000
3/16"-3-1/8" capacity
straight or taper shank
drill point angles 40-180 degrees
auto infeed
powerfeed unit
8" 6-jaw chuck
8" wheel
3.25" spindle bore
220V
sold for 20K new
note:includes tooling shown in pix
loading fee$250.00 |
|
| Ad # 10513 | Tool & Cutter Grinders |
| — |
Sunderland/Arter |
D12 |
Needs Work |
sold |
Photo /
More Info. |
| Sunderland/Arter Model D12 Grinder : — |
|
| Ad # 121 | Tool & Cutter Grinders |
| — |
B&S |
FACE GRINDER |
Good |
SOLD |
Photo /
More Info. |
| FACE GRINDER: 8" x 16" approx
UNIQUE MACHINE GRINDS FACE OF PART!! |
|
| Ad # 7277 | Tool & Cutter Grinders |
| 1988 |
CINCINNATI-MILACRON |
#2MT |
Very Good |
Sold |
Photo /
More Info. |
| CINCINNATI-MILACRON Universal tool and cutter grinder, Model #2MT: CINCINNATI-MILACRON Universal tool and cutter grinder, Model #2MT
Swing over table 10” diameter
Swing over table with raising blocks 14” diameter
Length between right and left hand tailstocks 27”
Length between tailstock and work head 21 ½”
Range:
longitudinal 16”
cross 10”
Table working surface 6” x 36”
Table swivels 180°
Swivel table adjustments-Tange bar taper setting
device (toward & away from wheel head) 5” per foot on diameter
-Fine adjustment taper setting device
(toward& away from wheel head) 2” per foot on diameter
Table graduations in center 90°
Vertical movement of grinding wheel spindle 10 ½”
Grinding wheel head swivels 360°
Grinding wheel head tilts above & below center 15°
Maximum distance, centerline of spindle to tabletop 13 ½”
Spindle speeds, 6” wheel, surface speed 6,022 FPM-3,837 RPM
3½” wheel, surface speed 5,887 FPM-6,442 RPM
EQUIPPED WITH:
Swiveling and tilting wheel head
Swivel table
Duplicate controls operating the machine at the front, right or left hand end of the table, or at the rear, right or left hand side of the column
Anti-friction ball bearing table rolling in replaceable hardened steel v-ways
H.D. Universal work head
Left and right hand tailstocks with centers
“Tange Bar” taper setting device permitting quick and precise positioning of the swivel table when grinding tapers
1-shot lubrication system
1 H.P. 3/60/230-460 volt grinding wheel drive motor and electrical controls |
|
| Ad # 9466 | Tool & Cutter Grinders |
| — |
grand rapids |
DWT |
Good |
SOLD |
Photo /
More Info. |
| Used for big drills: 1-3/4wide x 10" grinding wheels
dual heads
for big drills |
|
| Ad # 11932 | Tool & Cutter Grinders |
| — |
Cincinnati |
Spiropoint 1000 |
Excellent |
SOLD |
Photo /
More Info. |
| 1/32" - 1": Cincinnati Spiropoint 1000 drill grinder
Manufacturer: Cincinnati
Model: Spiropoint 1000
Capacity: 1/32" - 1"
Serial: 1L66P5L
Full Description
Capacity: 1/32" - 1"
Point Angles: 90 - 180 Degrees
Drill Length, Min- 3/4" - 1" Diameter: 6 1/4"
1/2" - 3/4" Diameter: 4 1/2"
1/4" - 1/2" Diameter: 4"
1/32" - 1/4" Diameter: 2 1/4"
Clearance Angle Adjustment: 2 - 58 Degrees
Equipped With Coolant Mist (Bijur)
Built-In Dust Collector
Full Set of Drill Jaw Holders
Micro Meter Feed Control
Adjustable Grinding Wheel Dresser
Buyer is responsible for crating and shipping charges
|
|
| Ad # 7278 | Tool & Cutter Grinders |
| — |
K.O. LEE |
#B360 |
Demo Machine |
Sold |
Photo /
More Info. |
| —: #B360 K.O. LEE Universal “Plainsman Series” tool and cutter grinder, “Never... |
|
| Ad # 15967 | Tool & Cutter Grinders |
| — |
Oliver of Adrian |
600 |
Good |
sold |
Photo /
More Info. |
| 1/2"-3-4" drill capacity: Oliver of Adrian large drill sharpner # 600
voltage: 440/3
hp:1.5
The Oliver Model 600 Drill Point Grinder is
the ideal machine for sharpening large diameter
bits from 1/2" to 3" (76 mm), with the option
to
increase the maximum drill size to 4" (102 mm).
The machine easily handles two flute, three
flute and four flute drill bits. Variable
included point angels are readily obtained and
variable clearance or lip relief angles can be
dialed in. The geometry that is best suited for
your manufacturing procedures can be added to
your drills easily and quickly.
A revolving chuck and oscillating grinding
wheel spindle are coordinated with a direct
gear
positive drive. All of the movements involved
with sharpening are automatic.
The Model 600 Automatic Drill Grinder is
supplied with an airdraulic infeed unit that
allows the operator to select the rate of
infeed
and the total amount of stock removal. This
feature, combined with the automatic grinding
cycle, permits the unit to function without an
operator once the loading and operating
sequence
has been completed. This eliminates the chance
of operator error that comes with swing
grinding
large bits. The machine is also supplied with a
tank, pump, splash guards and piping to provide
coolant to the grinding area.
Heavy duty, powerful and rigid machine
Easy to use with minimal training
required
Covers a wide range of applications
Longer lasting drills with burr-free
holes
Base model grinds 1/2” to 3” diameter
drills (2 sets of jaws)
Grind from 1/4" to 4” diameter drills
with
optional 4 sets of jaws
Superior wall finish
Compatible with spade, parabolic and
twist
drills
The Oliver 600 creates a precision helical
drill point, which provides superior
penetration
and longevity in comparison to a point created
by a typical "swing grind" style grinder. In
many applications, the Oliver helical point
reduces the torque and thrust required by over
20%, resulting not only in a longer lasting
bit,
but a longer lasting drill machine as well due
to less wear and tear. More holes drilled per
grind means less downtime that can result in a
substantial cost savings. This heavy duty,
powerful and rigid grinder will cover a wide
range of applications and provide many years of
reliable service.
|
|
| Ad # 11679 | Tool & Cutter Grinders |
| — |
Mohawk |
308 |
Fair |
sold |
Photo /
More Info. |
| Drill Bit Grinder: Mohawk Model 308
12" Grinding wheel
1725 Rpm
220/440 Wired 220
CAPACITY ..................................
1/8" TO 1-1/2"
MAXIMUM DRILL LENGTH ......................
15"
NUMBER OF FLUTES ..........................
2,
3 OR 4
STEP ANGLES ...............................
30
TO 90 DEGREE
POINT ANGLE ...............................
90
TO 140 DEGREE
GRINDING WHEEL SIZE .......................
12" X 1" X 3"
COOLANT ...................................
YES
SPINDLE MOTOR, HORSEPOWER .................
1 |
|
| Ad # 15789 | Tool & Cutter Grinders |
| 2005 |
CUTTERMASTER |
UPRIGHT |
Excellent |
sold |
Photo /
More Info. |
| normal up to 1 inch dia.: Purchased this Cuttermaster with all the accessories that are available. To... |
|
| Ad # 13281 | Tool & Cutter Grinders |
| 1975 |
Vollmer Dornhan |
S175 |
Good |
sold |
Photo /
More Info. |
| Bandsaw Blade Sharpener: Vollmer Dornhan
Model S175
Year 1975
220/3 Phase
Max Blade Depth 9"
|
|
| Ad # 8991 | Tool & Cutter Grinders |
| 84? |
Cincinnati Milacron |
39313 |
Fair |
SOLD |
Photo /
More Info. |
| 6 x 44 table-universal: 6 x 44 table-universal
swivel head -universal
6 in wheel
3837 rpm
center acc included
3.5" dia wheel 6442 rpm
5" 3 jaw chuck
coolant pump
|
|
| Ad # 12413 | Tool & Cutter Grinders |
| 1998 |
RT INDUSTRIES |
CNC Toolmaster 5100 |
Excellent |
sold |
Photo /
More Info. |
| —: CNC Tool Master 5100.
Axis 5
Fagor Controls #8050/55-M
Cooland tank and pump: Available
Spindle Speed:10000 RPM
Sindle Power: 5 KW total machine
15KVA
dia of tool max: 12.5mm
length of tool max: 150mm
This machine can do solid carbide
for
manufacturer and reshape works |
|
| Ad # 7265 | Tool & Cutter Grinders |
| 1977 |
GIDDINGS & LEWIS |
HC EXACTAMATIC |
Excellent |
sold |
Photo /
More Info. |
| GIDDINGS & LEWIS (WINSLOW) Drill Point Grinder, Model HC Exactamatic: GIDDINGS & LEWIS (WINSLOW) Drill Point Grinder, Model HC Exactamatic
Drill Point type and capacities:
Conventional Point 1/16" to 1" diameter
Helical Point 1/16" to 1" diameter
Racon Point 1/16" to 1" diameter
Split Point 1/16" to 1/2" diameter
Pyrcon (four facet) 1/16" to 1" diameter
Grinding wheel size 12" diameter x 5" bore x 3/4" face
Drill point included angles from 90 degrees to 140 degrees
EQUIPPED WITH:
Capability to handle all types of 2-fluted, right hand drills
Lip clearance angle adjusted from the operator’s control console
Point angle varied from by angular adjustment of workhead
Cam action-generated rotary motion in all three axes set at the operator’s control console
Built-in cam-formed wheel dresser
(4) Wheels mounts
(6) Quick-change inch bushing plates
(9) Rubber flex collet holders from 1/16" to 3/4"
(17) Cams
Quick-change holder with (17) expandable collets from 1/16" to 1"
Aget Mistkop oil mist collector
1/8 H.P. coolant pump motor
1/4 H.P. workhead motor
1 H.P. grinding wheel drive motor and electrical controls |
|
| Ad # 10513 | Tool & Cutter Grinders |
| — |
Sunderland/Arter |
D12 |
Needs Work |
sold |
Photo /
More Info. |
| Sunderland/Arter Model D12 Grinder : — |
|
| Ad # 12680 | Tool & Cutter Grinders |
| Unk |
Brown & Sharpe |
No. 1 Grinder |
Needs Work |
sold |
Photo /
More Info. |
| Unk: Machine was left in warehouse which I purchased. Working condition is unkn... |
|
| Ad # 8115 | Tool & Cutter Grinders |
| 1970 |
McDONOUGH |
STERLING DV |
Excellent |
sold |
Photo /
More Info. |
| 1/8 TO 2.5" VARIABLE ANGLE DRILL GRINDER: McDONOUGH (STERLING) MODEL DV VARIABLE ANGLE DRILL GRINDER. USES 6" GRINDIN... |
|
| Ad # 7598 | Tool & Cutter Grinders |
| — |
K O Lee |
BA 960 |
Very Good |
Sold |
Photo /
More Info. |
| K O Lee BA-960 (6" x 20" Table) Universal Tool and Cutter Grinder: SWING OVER TABLE ..................... 8 1/4"
DISTANCE BETWEEN TAILSTOCKS .......... 22.00"
SPINDLE CENTER TO TABLE(MIN-MAX) ..... 3 3/4"-10 3/4"
TABLE TRAVEL ......................... 20.00"
SADDLE TRAVEL ........................ 7 1/4"
GRINDING WHEEL ....................... 6" (MAX) X 5/8" HOLE
TABLE WORKING SURFACE: 5.25" X 27.25" (8.00" X 36.00" OVERALL)
COLUMN DIAMETER ...................... 4"
VERTICAL TRAVEL ...................... 7"
ELECTRICAL:
B923G WORKHEAD 1/2HP, 1/60/115-230 VOLT, 3450 RPM MOTOR |
|
| Ad # 6877 | Tool & Cutter Grinders |
| — |
JUNGNER |
MODEL 450 CNC |
Very Good |
Sold |
Photo /
More Info. |
| JUNGNER CNC DRILL GRINDER, MODEL 450 CNC: 1 PREOWNED JUNGNER CNC DRILL GRINDER, MODEL 450 CNC
SPECIFICATIONS
LONGITUDINAL TRAVEL --------------------- 18"
CROSS TRAVEL ---------------------------- 11"
VERTICAL TRAVEL ------------------------- 9"
FIXED VERTICAL ADJUSTMENT --------------- 4"
TOTAL VERTICAL MOVEMENT ----------------- 13"
WORK TABLE CLAMPING AREA ---------------- 31.5"x4.5"
WORK TABLE SWING ------------------------ +6
MAX. CENTER DISTANCE -------------------- 18"
MAX. GRINDING DIA. ---------------------- 10.25"
TAPER FOR WORKHEAD ---------------------- ISO-50
GRINDING MOTOR OUTPUT ------------------- 2 HP
GINDING SPINDLE SPEEDS ------------------ 1,400/2,800 RPM
EACH DIRECTION ------------------------ 3,500/7,000 RPM
------------------------ 5,600/11,200 RPM
PROGRAMMABLE FEED INCREMENTS ------------ .00001"
INTERPOLATION INCREMENTS ---------------- .000005"
INDEX ACCURACY OF WORKHEAD -------------- +30" |
|
| Ad # 15980 | Tool & Cutter Grinders |
| — |
Deckel |
SOE |
Excellent |
sold |
Photo /
More Info. |
| —: Offered for sale is the Cadillac of single lip
cutter grinders. Wait, it's german, so maybe
it's the Mercedes.
Imported by Cose, has a Kobold motor.
Includes 2 very recently bought diamond cup
wheels, very complete set of collets, wrenches,
manual, and the optical comparator
The collet nut has been modified for a fixed
stop for cutter length in case you want to make
multiple cutters. In addition, I believe that
there was another modification to allow making
three fluted cutters. We never made single
fluted ones, they just don't run as well or as
long as three flutes
Input voltage is 220/440 three phase and 110
for the lamp
|
|
| Ad # 3456 | Tool & Cutter Grinders |
| — |
Cincinnatti |
# 2 Tilt head |
Fair |
sold |
Photo /
More Info. |
| # 2 Tilt head Tool & Cutter Grinder: # 2 Tilt head Tool & Cutter Grinder
has tilt head feature |
|
| Ad # 10503 | Tool & Cutter Grinders |
| — |
Holroyd |
24" |
Very Good |
sold |
Photo /
More Info. |
| Holroyd Model 24'' Profile Grinder: Holroyd Profile Grinder
New: S/N #16429
Max Dia of Cutter 24''
Diameter of Grinding Wheel 7''
Width of Grinding Wheel 1/16''
Speed of Grinding Wheel 2800 RPM
HP of Motor 1/4 HP
Floor Space Requirements 3' 6'' x 4' 0''
Machine Equipped With
* Books/Manuals
|
|
| Ad # 11055 | Tool & Cutter Grinders |
| — |
Cinncinati |
# 2 |
Fair |
sold |
Photo /
More Info. |
| # 2 Tool & cutter grinder: Cincinnati # 2 tool & cutter grinder |
|
| Ad # 15692 | Tool & Cutter Grinders |
| 1973? |
Alexander |
2CG |
Good |
sold |
Photo /
More Info. |
| —: Alexander single point tool sharpener
Model 2CG
Includes manuals and some minor tooling |
|
| Ad # 13282 | Tool & Cutter Grinders |
| 1996 |
Businaro |
400 SR |
Good |
sold |
Photo /
More Info. |
| Cold Saw Blade Sharpener: Businaro
Model 400 SR
Year 1996
Voltage 220/ 3 Phase
Max Blade Size 14"
|
|
| Ad # 5213 | Tool & Cutter Grinders |
| — |
TACCHELLA |
4M |
Very Good |
sold |
Photo /
More Info. |
| #4M TACCHELLA Tool & Cutter Grinder:
Type of Grinding Head Tilting, Independent
Reversible Spindle
Grinding Head Mount 4" Eccentric
Spindle Speeds (4) 2200 to 6400 RPM
Table Size 5"x 35"
Table Travel- Longitudinal 16"
Table Travel- Cross 8"
Head Travel- Vertical 10"
Maximum Grinding Wheel Size 8" OD
Spindle Tilts +/- 20 Degrees
Spindle Swivels 360 Degrees
Table Swivels 360 Degrees
Spindle Motor (2-Speed) 1.47/1.1KW 220V 3Ph 60Hz
3320/1680RPM
Equipped with (2) Tailstocks, Sensitive Workhead
with Index Plates, Motor for Workhead
|
|
| Ad # 15739 | Tool & Cutter Grinders |
| 1973 |
Wasino |
GLS-125A/SR-500C |
Good |
sold |
Photo /
More Info. |
| 10": Wasino-optical profile grinder #GLS-125A
w/acu-rite dro -single axis
Std mfg specs below-please verify actual machines
Optical profile grinder WASINO GLS-125A
Optical Profile Grinder
Grinding Length: 10"
Grinding Width: 3-1/8"
Grinding Height: 5"
Table Fixing Length: No Limit
Table Fixing Width: 8"
Table Fixing Height: 4"
Projector Screen Size: 21" X 20-1/4"
Projector Magnification: 50x, 20x Or 50x, 25x
Projector Direct Viewing Area @ 50x, 25x, 20x: 3/8" X 3/8", 3/4" X 3/4"
Projector Lamps (diascopic & episcopic): Both 300w
Table Working surface, L X W: 11" X 8"
Main Wheel size: 6"Dia. X 1/4"W X 1- 1/4"B.
Main Wheel speed: 3, 600 RPM
Approximate dimensions of machine: 83"L X 80"W X 83"H
Machine Weight: 5, 500 LBS
YOM: 1973
Made in: Japan
Specification:
Grinding capacity: 250x80x125 mm
Screen size: 535x515 mm
Max grinding wheel diameter: 150 mm
Grinding strokes per 1min: 40-80
Grinding stroke, adjustable, infinitely variable: 0 – 182 mm
Table area: 280x200 mm
Travel of table:
-Longitudinal: 250 mm
-Vertical: 140 mm
-Cross: 80 mm
WHEELHEAD
Spindle speeds: 3600 rpm
Wheel size: Up to 150x6x32 mm
Relief angle:
-For radial grinding: 0 - 35 degrees
-For lateral grinding: +/- 10 degrees
Swiveling angle: +/- 45 degrees
Longitudinal travel: 200 mm
Cross travel: 160 mm
Total power capacity: 2.5 kW
Machine weight: 2750 kg
Note:rigging/loading fee $650.00 onto flat bed |
|
| Ad # 10497 | Tool & Cutter Grinders |
| 1998 |
Record |
— |
Good |
sold |
Photo /
More Info. |
| Rekord Saw Blade Grinder: Equipment: Saws
Model: Rekord Saw
Description: Rekord Saw Blade Grinder
Reference #: 2016
|
|
| Ad # 10473 | Tool & Cutter Grinders |
| — |
Hybco |
1900 |
Good |
sold |
Photo /
More Info. |
| Hybco Model 1900 Heavy Duty Universal Grinder : HYBCO UNIVERSIAL TOOL AND CUTTER GRINDER
MODEL #1900 S/N TG257
***Relief Grinder Attachement***
SPECIFICATIONS:
Table Working Surface: 6" x 36"
Longitudinal Travel: 14-1/2"
Cross Travel: 8-1/4"
Grinding Spindle, Vertical Travel: 7-1/4"
Grinding Spindle Rotation: 360 Degrees
Grinding Spindle Tilt, either side of horizontal: 25 Degrees
Grinding Spindle Speeds: 3800-6400 RPM
Grinding Spindle Motor: 1.5 HP, 230/460/3/60/, 3430 RPM
Grinding Wheel Maximum Diameter: 7"
Grinding Spindle Taper: 3" per foot
Floor Space: 55" x 72"
Approx. Weight: 2000 lbs.
EQUIPPED WITH
Model 2100SB Two-Way Relieving Fixture, S/N: RF-1291
Spindle Center Height.................7-1/2"
Erickson Collet Capacity..............1-5/8" Thru Spindle
Maximum Diameter Between Centers......4"
Maximum Length Between Centers........11"
1-1/2 HP Spindle Motor, 3150 RPM 230/460/60/3
LOTS OF TOOLING (SEE PHOTOS)
|
|
| Ad # 9170 | Tool & Cutter Grinders |
| 1952 |
landis |
1228 |
Good |
sold |
Photo /
More Info. |
| 12x48 univeral head: hibco 2100relief grinding attach.
adj. angle dresser
miniwizard readout
variable speed dresser
id grinding att.
coolant pump
light |
|
| Ad # 13613 | Tool & Cutter Grinders |
| 1962 |
Cincinnati |
Monoset |
Good |
sold |
Photo /
More Info. |
| 2": Cincinnati Monoset Tool Cutter Grinder
1962
12" x 4"
Voltage 220/3 Phase
ID and OD Spindles
Comes with lots Of "TOOLING" |
|
| Ad # 15177 | Tool & Cutter Grinders |
| 1994 |
Oliver Instrument Company |
700 |
— |
sold |
Photo /
More Info. |
| 1/2" - 3": Drill Grinder
Manufacturer: Oliver Instrument Company, Adrian
Instrument Company
Model: 700
Serial No.: Available for Serious Inquiry
Date of Manufacturer: 1994
Capacity: 1/2" - 3"
Motor: 2 HP
Electrics: 460 Volt/3 Phase/60 Cycle/3 Amp/1,800 RPM
Can be set up for 4" drill but requires a $6,000
manufacturer upgrade.
Features:
...Push Button Control Panel: Wheel Oscillation,
Spindle Stop/Start buttons, Auto Self-Centering
...Emergency Stop Button
...Air Feed System: allows drill to move into grinding
stone per user's angle & depth settings
Link to Manufacturer's Website on this Particular Model
Grinder:
http://www.oliverinstrument.com/oliver600.html
Machine runs well; was used regularly to grind 1"+
diameter drill bits before machine was put in surplus
inventory.
Owner decided to sub-contract out drill grinding.
Will require some basic cleaning, wipe down.
Buyer responsible for freight logistics and expenses.
I have the ability to deliver; delivery fee dependent on
distance and time.
Seller agrees to load equipment on Buyer's truck.
Equipment under power and available for inspection.
Buyer to verify all specifications and options of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed or
implied, of the year, model, hour reading, guarantee of
merchantability or fitness of the equipment; the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
| Ad # 15132 | Tool & Cutter Grinders |
| — |
Supermax |
M-40 |
Excellent |
sold |
No Photo /
More Info. |
| 5200 lbs: Power Electrical 60 Hz 3 phase
Swing over table 10"
Distance between centers 27&1/2 "
Distance between tail stock & work head 22&
3/4"
Work head spindle tapers MT#5XASA #50
Table working surface 5-5/16 X 37 1/2.
Longitudinal travel 16 In.
Table graduation on end for taper grinding
+10.
Graduation for table swivel movements
+60. |
|
| Ad # 1953 | Tool & Cutter Grinders |
| 1989 |
Iida Machinery Works Co. |
GL 350 F |
Very Good |
SOLD |
Photo /
More Info. |
| 2 head tool grinder w/coolant tank: 1989 Iida machinery Works Co.Ltd. 2 head tool giinder. coolant tank & encl... |
|
| Ad # 10929 | Tool & Cutter Grinders |
| 2000 |
Walter |
HMC-500 |
Very Good |
Sold |
Photo /
More Info. |
| 5 AXIS tool and cutter grinder: 2000 Walter HMC-500 Helitronic Power 5 axis grinder
Std. specs below-please verify
Travels: 18.5" x 12.5" x 26" ,
24HP main motor
walter HMC-500 cnc control
software pkg 1,2,3,4 16,25
#1-basic end mill pkg
# 2-taper end mill pkg
# 3-drill & step drill pkg
# 4-counter bore step tool pkg
# 16-warm up pkg
# 25-compression routers pkg.
cyber grinding for off-line programming
Xpert mode programming
glass scales
Spindle speed 8500 rpm
Max tool length-12.6"
Max tool gring Length-14.6" OD
max workpiece weight-110.25 lbs
gring wheel dia-7.88"
includes mist system
co2 fire suppression
Machine weight:10,200lbs
t-slots on c axis
high presure coolant
coolant filter system
approx. 31,000 hrs as of 2/1/11 |
|
| Ad # 1559 | Tool & Cutter Grinders |
| 1968 |
K.O. Lee |
BA 960BB |
Needs Work |
Sold |
Photo /
More Info. |
| KO Lee Type "BB" Tool & Cutter Grinder with 20,700 rpm Spindle: Spindle Speed: 3,450-20,700 rpm
Parts book |
|
| Ad # 8997 | Tool & Cutter Grinders |
| — |
— |
— |
— |
SOLD |
Photo /
More Info. |
| —: grinding mill is a leading world level industrial mill.The mill machine is ... |
|
| Ad # 16076 | Tool & Cutter Grinders |
| 1980? |
KO Lee |
B6062R |
Good |
sold |
Photo /
More Info. |
| swing 12.25" centers:32": KO Lee Tool and cutter grinder #B6062R:S/N#20636MG
Std Mfg. specs below -please verify actual machines
Swing over table: 12-1/4"
Distance between tailstocks: 32"
Table working surface: 5-1/4" X 37-1/4"
Sub table: 8" X 48"
Longitudinal table traverse: 20"
Fast: 2-13/16"
Slow: 9/16"
Cross feed: 8"
Feed per rev. of handwheel (.001" grad.): 0.050"
Vertical movement of column: 10-1/2"
Column diameter: 6"
Shaft to table: 5-3/8" / 15-1/4"
Spindle 90 deg. to table: 6-3/8"
Spindle 90 degrees to table: 11-1/2"
Table swivels (calibration: 3" PER FT.,
15 deg. either side of center): 225 DEGREES
Wheel head swivel: 360 DEGREES
Maximum i.d. depth, hole size 9/32" to 2":3-1/2"
Maximum cross feed surface grinding w/8"wheel:5"
(heavy duty wheelhead): 2840 TO 5330 RPM
Approximate machine weight: 1,500 LBS
Lots of tooling included:diamond wheels,tail stocks,xy table ,fixtures,wheel hubs ect. |
|
| Ad # 6465 | Tool & Cutter Grinders |
| — |
CINCINNATI |
2 |
Very Good |
SOLD |
Photo /
More Info. |
| #2 CINCINNATI TOOL & CUTTER GRINDER: #2 CINCINNATI TOOL & CUTTER GRINDER:
AREA OF TABLE ........................... 36´´ X 5-1/4´´
SWING OVER TABLE ........................ 10´´
MAXIMUM CENTER DISTANCE ................. 27´´
LONGITUDINAL TABLE TRAVEL ............... 16´´
CROSS TABLE TRAVEL ...................... 8´´
VERTICAL TRAVEL OF GRINDING SPINDLE ..... 7-1/2´´
GRINDING SPINDLE SPEED .................. 3850 RPM
TABLE SWIVEL ............................ 180 DEGREE
GRINDING SPINDLE SWIVEL ................. 240 DEGREE
GRINDING SPINDLE MOTOR, HORSEPOWER ...... 1 |
|
| Ad # 7971 | Tool & Cutter Grinders |
| — |
Cincinnati |
SPL |
Fair |
SOLD |
Photo /
More Info. |
| SPL Snagging Grinder: — |
|
| Ad # 16173 | Tool & Cutter Grinders |
| 1996 |
Giddings & Lewis |
HC/17822M |
Good |
sold |
Photo /
More Info. |
| 1/16"-1.5": G & L # HC exactamatic Helical point drill
grinder
Std mfg specs below -please verify actual
machines
specifications:
Helical1/16" to 1-1/2" (1.55 to 38.0 mm)
Wide-Web Helical1/16" to 1-1/2" (1.55 to 38.0
mm)
Bickford*1/8" to 1" (3.0 to 25.4 mm) -
*Requires two operations to achieve geometry
Racon1/8" to 1" (3.0 to 25.4 mm)
Conventional1/16" to 1" (1.55 to 25.4 mm)
Step drills3/32" to 1/2" (2.4 to 12.5 mm)
3- and 4-fluted drills1/16" to 1-1/2" (1.55
to 38.0 mm)
2, 3 and 4 straight-fluted plug and bottom
taps#4 to 7/8" (M3 to M22)
Grinding wheelHorizontally mounted; 20" (510
mm) diameter
Spindle power3 HP (2.25 kW), 1800 RPM
CNC Controlyes
Dimensions92" x 102" (2.34 x 2.59 m) plus
coolant tank
Weight3200 pounds
|
|
| Ad # 13393 | Tool & Cutter Grinders |
| 1995 |
Supermax/top-work |
M-40 |
Good |
sold |
Photo /
More Info. |
| 10" x 16" travels: Supermax M-40 manual tool and cutter grinder
good shape and used very little
part time for 2 years.
6" -6 jaw chuck & 4 jaw indepdent
chuck
swing over table:10"
centers distance :22.75"
table size: 5.56 x 37.5"
travel longitudinal : 16"
cross saddle travel : 10"
head swivel angle 180 deg
table graduation +10
swivel grad: +60
universal table
wheel head swivel: 360 deg
variable speed chuck reastat added for
precision grinding speeds
coolant tank
ID attachement included
includes minor tooling-collets,
machine sold new for almost 16K w/ all acc
made it taiwan
|
|
| Ad # 7266 | Tool & Cutter Grinders |
| 1978 |
GIDDINGS & LEWIS (BICKFOR |
HC Exactamatic |
Excellent |
sold |
Photo /
More Info. |
| GIDDINGS & LEWIS Semi-automatic drill point grinder, HC Exactamatic: GIDDINGS & LEWIS (BICKFORD) Semi-automatic drill point grinder, Model HC Ex... |
|
| Ad # 10621 | Tool & Cutter Grinders |
| 1973 |
CINCINNATI MILACRON |
#2 |
Very Good |
sold |
Photo /
More Info. |
| SEE BELOW: CINCINNATI MILACRON
Specifications:
Swing Over Table.....................10 1/2"
Vert. Adjustment of Wheelhead........7 1/2"
Distance Btwn Workhead & Tailstock...21 1/2"
Longitudinal Travel..................16"
Cross Travel.........................10"
Table Size...........................5 1/4" x 36"
Spindle Speeds.......................2958, 3837, 6442 rpm
Main Motor...........................1 hp, 3ph, 240/480v
Equipped With:
Motorized Work Head
Set of Centers
Misc. Tooling
|
|
| Ad # 12944 | Tool & Cutter Grinders |
| 1953 |
cincinati |
OL |
Good |
sold |
Photo /
More Info. |
| 10"x24": 10"x24" Cincinati Hydraulic Universal Grinding
machine
Model-OL
2 Speed Handle Table Traverse
Automatic Pick Feed
Hand Mechanical Cross Feed Movement
One Grinding Wheel
Coolant Pump
Center Knock Out Bar
1/16th Minimum Table Reciprocating Movement
Splash Gaurds
220 3 Phase 60 cycle
Head Stock- Swivel Base,Combination Live and
Dead Spindle and Head Stock Center
Center Rest -1/2" To 3" Maximum Diameter Work
Collant-25 Gallons |
|
| Ad # 10473 | Tool & Cutter Grinders |
| — |
Hybco |
1900 |
Good |
sold |
Photo /
More Info. |
| Hybco Model 1900 Heavy Duty Universal Grinder : HYBCO UNIVERSIAL TOOL AND CUTTER GRINDER
MODEL #1900 S/N TG257
***Relief Grinder Attachement***
SPECIFICATIONS:
Table Working Surface: 6" x 36"
Longitudinal Travel: 14-1/2"
Cross Travel: 8-1/4"
Grinding Spindle, Vertical Travel: 7-1/4"
Grinding Spindle Rotation: 360 Degrees
Grinding Spindle Tilt, either side of horizontal: 25 Degrees
Grinding Spindle Speeds: 3800-6400 RPM
Grinding Spindle Motor: 1.5 HP, 230/460/3/60/, 3430 RPM
Grinding Wheel Maximum Diameter: 7"
Grinding Spindle Taper: 3" per foot
Floor Space: 55" x 72"
Approx. Weight: 2000 lbs.
EQUIPPED WITH
Model 2100SB Two-Way Relieving Fixture, S/N: RF-1291
Spindle Center Height.................7-1/2"
Erickson Collet Capacity..............1-5/8" Thru Spindle
Maximum Diameter Between Centers......4"
Maximum Length Between Centers........11"
1-1/2 HP Spindle Motor, 3150 RPM 230/460/60/3
LOTS OF TOOLING (SEE PHOTOS)
|
|
| Ad # 12385 | Tool & Cutter Grinders |
| — |
Oliver of Adrian |
ACF 1199 |
Good |
sold |
Photo /
More Info. |
| Cut off tools or Recess tools: Oliver of Adrian
Cutt off tool grinder and recess tool grinder
Model ACF-1199
Voltage 440
8" Stroke
12" Depth
16" x 16" Table |
|
| Ad # 3119 | Tool & Cutter Grinders |
| 1994 |
G&L Winslowm |
HR |
Excellent |
SOLD |
Photo /
More Info. |
| Nice Winslowmatic With Loads Of Tooling And Lista Cabinet: Drill Point Types & Capacities:
Conventional Points ..................... 1/16" TO 1- 1/2"
Helical Points ................................. 1/16" TO 1- 1/2"
Raycon Points ............................... 1/8" TO 1"
Bickford Points .............................. 1/8" TO 1"
Split Points ..................................... 1/16" TO 1/2"
Point Angles From ...... ................ 60 TO 140 Degrees
Grinding Wheel ............................ 12" Dia.
Motor .............................................. 1 HP
Equipped with standard & many optional features:
(5) Wheel Hubs with 3 grinding wheels
"LISTA" 7 Drawer Cabinet for Tool Storage Dimensions: 28-1/2 x 28-1/4" x 41-3/4"
Oil Mist Collector
(1) HR Manual with set up, operation and drawings
(1) Helical Manual
|
|
| Ad # 6448 | Tool & Cutter Grinders |
| — |
Winslow |
HC-101 |
Very Good |
sold |
Photo /
More Info. |
| Winslow Exatomic HC-101 Drill Pinter Grinder with Splitter: 1/2" Capacity
Splitter Attachment
12" dia. Wheel
Wheel Hubs
All Standard and Metric Bushings:
1/16" to 1/2" (1.6mm to 13mm) |
|
| Ad # 15968 | Tool & Cutter Grinders |
| 1997 |
Giddings & Lewis |
940 |
Good |
sold |
Photo /
More Info. |
| —: Giddings & Lewis 940 Tool Sharpener w/Coolant
Pump & Dust Collector, model HC, approx.
footprint of 42" x 70" x 100" tall, 460V, 3ph
Exactamatic #HC, grinder, .0625" min to 1"
maximum drill capacity
std mfg specs below-please verify actual
machines
Drill Capacity:1/16" X 1"
Drill Length:12"
Travel:4"
Horizontal Mounted Ultra Precision Point
Concentric:0.0002"
Point Drill Degrees Included Angles:60 To 140
Degree
Grinding Wheel Size:12" X 5"
Grinding Wheel Width:1"
Grinding Wheel Motor:3/4 Hp.
Grinding Wheel Speed:1,800 Rpm's
Work Head Motor:1/4 Hp
Work Head Speeds:1,800 Rpm's
Coolant Motor:1/8 Hp
Coolant Tank:7-1/2 Gallon
Coolant:Yes
Guards:Yes
Drill Holder:Yes
Dust / Mist Collector:Yes
Drill Splitter:Yes
Drill Bushing Index Plates:Yes
Drill Holders With Collects:Yes
Grinding Wheel Built-In Cam Former Wheel
Dresser:Yes
Self Contained Automatic Lubrication System:Yes
Point & Angle Can Be Varied By Work Head
Angular
Adjustment:Yes
Over All Dimensions:24" X 30" X 46" H
Weight:1,875 Lbs. |
|
| Ad # 2369 | Tool & Cutter Grinders |
| — |
DoAll |
10 |
Good |
SOLD |
Photo /
More Info. |
| Universal Tool & Cutter Grinder: Universal Head
2600, 3700, 6200 RPM
Table size: X = 37" Y = 5 1/2 "
|
|
| Ad # 10081 | Tool & Cutter Grinders |
| — |
Hybco |
1100 |
Good |
sold |
Photo /
More Info. |
| 1-1/16 shank max: Collets as pictured approximate .141"-1.108"
Uses Collet Type 5C
1/4 HP Main Motor (verify)
1-1/16 max shank
extra belts
cams
wheels
radius dresser
manual |
|
| Ad # 959 | Tool & Cutter Grinders |
| — |
MOHAWK |
3-1/2" CAPACITY |
Good |
Sold |
Photo /
More Info. |
| DRILL GRINDER- 3.5" CAPACITY: 0-30Deg universal head |
|
| Ad # 6691 | Tool & Cutter Grinders |
| 1977 |
BROWN & SHARPE |
#13 |
Excellent |
sold |
Photo /
More Info. |
| BROWN & SHARPE Universal Tool & Grinding Machine, Model #13: BROWN & SHARPE Universal Tool & Grinding Machine,
Model #13, Projectordress Added 1992
Capacity:
Grinds work up to 8" diameter
Grinds length 14"
Distance between headstock and footstock centers
24"
Maximum distance between tailstocks 31"
Maximum automatic table travel 22"
Maximum length of work which can be ground 15"
cylindrically with wheel spindle parallel to
table
ways
Minimum/Maximum distance centerline of work to
2.25"/12.5"
center of wheel spindle
Minimum/Maximum distance center of wheel spindle
3.75" / 12-1/8"
to top of table
Wheelhead:
Grinding wheel size 7" diameter x 1/2" wide x 1-
1/4"bore
(3) Grinding wheel speeds 2,730 & 3,600 & 5,150
R.P.M.
Wheelhead travel 8-3/8"
Wheelhead swivels, left and right 110 degrees
Vertical adjustment 8-3/8"
Swivel Table:
Working surface 6-1/8" x 44-1/8"
Angular settings to left and right 90 degrees
Fine screw adjustment for setting tapers up to 3"
per foot
Table travel 22"
Table travel per revolution of handwheel 1/4"
slow, 6-1/4" fast
Headstock:
Swivels left and right 100 degrees
(4) Spindle speeds 128 to 540 R.P.M.
Spindle taper #7 BROWN & SHARPE
EQUIPPED WITH:
"Projectordress" optical dresser with "Factsor"
digital display (Used for dressing optical
forms into the grinding wheel)
Four-jaw chuck
Three-point steady rest
Universal table, workhead, and wheelhead
Double ended wheel spindle
Dual live/dead headstock spindle
Fine cross feed knob (graduated to 0.0001" work
diameter)
Vertical handwheel graduated to read to .0005"
Anti-friction bearings for wheelhead spindle
1/6 H.P. workhead motor
1 H.P. 3/60/220-440 volt wheelhead motor and
electrical controls |
|
| Ad # 2736 | Tool & Cutter Grinders |
| — |
TDR |
82-B |
Excellent |
SOLD |
Photo /
More Info. |
| TDR Drill Sharpener : 1/16" 1-1/2" capacity
Will sharpen split point, reamers, end teeth of parabolic drills, end mills, taps...radial relief on end mills |
|
| Ad # 9256 | Tool & Cutter Grinders |
| 1978 |
cinacinatti |
# 2T ? |
Very Good |
Sold |
Photo /
More Info. |
| Univeral type: univ work head
univ table
tailstock
work light |
|
| Ad # 5472 | Tool & Cutter Grinders |
| 1989 |
KO Lee |
— |
Fair |
sold |
Photo /
More Info. |
| —: — |
|
| Ad # 2494 | Tool & Cutter Grinders |
| 1955 |
Cincinnati |
— |
Good |
sold |
Photo /
More Info. |
| CINCINNATI #2 TOOL AND CUTTER GRINDER: Swing over table diameter: 10-1/2"
Length, between right & left-hand tailstocks (max.: 27"
Length, between tailstock and workhead: 21-1/2"
Working surface of table: 6" x 44"
Longitudinal movement of table: 24"
Cross movement of table: 10"
Cross range gained by swivel table: 3-1/2"
Total extended cross range: 17"
Table swivels 180 deg.
Table graduations in center, in degrees 90 deg.
Vertical movement of grinding wheel spindle: 10-1/2"
Swivel movement of grinding wheel spindle 360 deg.
1 HP 3450 RPM Wheel head
Electrical controls
Max. distance centerline spindle to top of table 13-5/8"
|
|
| Ad # 12326 | Tool & Cutter Grinders |
| 1965 |
Tecchella |
4AM |
Good |
sold |
Photo /
More Info. |
| 6" x 36" Table: Tecchella Universal Cutter Grinder
1965
Voltage 220
6" x 36" Table
Swivel Head |
|
| Ad # 6832 | Tool & Cutter Grinders |
| 1997 |
Anca |
MG-7 |
Very Good |
Sold |
Photo /
More Info. |
| 1997 Anca MG-7 CNC Tool & Cutter Grinder: 1997 Anca MG-7 CNC Tool & Cutter Grinder
7 Axis CNC Tool & Cutter Grinder
Anca Control
Pop Up Steady
Probe
Auto Loader
Hard Drive
Floppy
Travels 13" x 8" x 9"
C-270 Deg
B-180 Deg |
|
| Ad # 13063 | Tool & Cutter Grinders |
| — |
SUPERIOR TOOL |
— |
Excellent |
sold |
Photo /
More Info. |
| 5/16"-3": SUPERIOR TOOL DRILL GRINDER
FACTORY REDONE
LOTS OF MONEY INVESTED HAVING REBUILT
WORKS LIKE A CHARM
SHARPENS DRILLS FROM: 5/16" TO 3" DIAMETER
MY LOSS YOUR GAIN
VERY NICE MACHINE
|
|
current group
groups previously viewed
groups not yet viewed
