Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8778 | Cylindrical Grinders (O.D. & I.D.) |
|
Cincinnati |
D-E |
Very Good |
Sold |
Photo /
More Info. |
14 x 36: MAKE: CINCINNATI MILACRON
TYPE: UNIVERSAL GRINDER
MODEL: D-E
CAPACITY: 14' OR 355.6MM DIA. AND 36' OR 914.4MM IN LENGTH
SERIAL# 353213D73-0006
CONTROL VOLTAGE: 115-120VAC 50/60 HERTZ
AC INPUT POWER 230VAC 3 PHASE 50/60 HERTZ
FULL LOAD AMPS: 30 AMPERES
TERMS AND CONDITIONS:
SPECIFICATIONS AND EQUIPMENT SUBJECT TO VERIFICATION WITH CORPORATE APPROVAL
FULL PAYMENT DUE PRIOR TO MACHINE PREPARATION FOR SHIPMENT
SUBJECT TO AVAILABILIty
collector with it
|
|
Ad # 11644 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati Milacron |
? |
Very Good |
sold |
Photo /
More Info. |
14" x 36" OD grinder: Cincinnati Milacron Universal Hydraulic
OD/ID
14" x 36"
14" Grinding wheel Max OD
10" Magnetic Chuck face chuck
4 Jaw 10" Chuck (not Shown) |
|
Ad # 9382 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
1R |
Good |
sold |
Photo /
More Info. |
6" X 18" : 6" X 18" LANDIS MODEL 1R, Ltr R PLAIN
CYLINDERICAL GRINDER
Swing Over Table, Nominal 6"
Max grinding diameter 6.875"
Distance beyween centers, Nominal 18"
Grinding wheel diameter, standard 16"
Grinding wheel diameter, Max 3"
Grinding wheel hole diameter 5"
Table swivel taper 4 IPF"
Table swing angle 20 degrees
Table longitudinal feeds, infinite 2 to 240 IPM
Hydraulic Longitudinal Table Feed
Hydraulic Grinding Wheel Infeed
1/4 HP Workhead
Bijur One Shot Lubrication System
Coolant System (Tank & Pump)
|
|
Ad # 5416 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
10" x 72" |
Fair |
Sold |
Photo /
More Info. |
10" x 72" Norton OD GRinder with 14" Dia Wheel: Swing: 10"
Distance Between centers: 72"
Max. Grind Length: 72"
Wheel Diameter: 24"
Coolant and Filtration System
Three Steady Rests
1 x Diamond Dresser |
|
Ad # 10173 | Cylindrical Grinders (O.D. & I.D.) |
?? |
Van Norman |
465 |
Very Good |
sold |
Photo /
More Info. |
14"swing x 60" centers-crank shaft grinder: Crank Shaft style grinder
14" x 60" centers
2-8" 3 jaw chucks
rapid traverse
wheel infeed
arnole gage
centering stand
24" dia wheel
wheel balancer included
10 spare wheels included
Also with: centering gage, some spare parts,
will hold 0.0005 tolerance no problem
cuts nice -round circles |
|
Ad # 12475 | Cylindrical Grinders (O.D. & I.D.) |
|
Ribon |
Rur 1000 |
Good |
sold |
Photo /
More Info. |
12" x 36": Ribon Rur 1000
Id / OD Grinder
14" Wheel
12" x 36" Travels
Hydrailic Travels
1750 RPM
Coolent
Made in italy |
|
Ad # 8034 | Cylindrical Grinders (O.D. & I.D.) |
|
Toyoda |
|
Very Good |
Sold |
Photo /
More Info. |
Toyoda OD Grinder: universal in great condition includes all attachments, and a large box of ... |
|
Ad # 14790 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati |
8 x 12 x 36 |
Good |
sold sold |
Photo /
More Info. |
12"dia x 36"length: Concinnati 8 x 12 x 36 OD grinder
OD only
max swing 13"
main motor: 5HP
center distance:36" max
vari speed on work head
universal table
16" dia wheel x 1" on machine
coolant
Note: machine was completly refurbished &
upgraded
then never run,looks great!
rigging/loading fee $1000.00 |
|
Ad # 7683 | Cylindrical Grinders (O.D. & I.D.) |
|
LANDIS |
3RH |
Very Good |
Sold |
Photo /
More Info. |
24´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER : 24´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER
NOMINAL GRINDING CAPACITY ........ 24´´ X 96´´
ACTUAL SWING OVER TABLE .......... 25-1/2´´
GRINDING WHEEL SIZE .............. 14´´ X 1-1/2´´ X 5´´
GRINDING WHEEL SPEEDS ............ (2) 1720 & 2185 RPM
INTERNAL SPINDLE SPEED ........... 15000 RPM
TABLE TRAVERSE SPEED (VARIABLE) .. 2 TO 240 IPM
WORKHEAD SPEEDS (VARIABLE) ....... 12 TO 360 RPM
WORKHEAD / WHEELHEAD / TABLE ..... SWIVEL
WORKHEAD SPINDLE ................. LIVE OR DEAD
INFEED ........................... AUTOMATIC
CHUCK ............................ 18´´ 4-JAW
I.D. SPINDLE ..................... BOLT-ON TYPE
LUBE SYSTEM ...................... BIJUR
COOLANT .......................... YES
WORKHEAD MOTOR ................... 1 HORSEPOWER
HYDRAULIC MOTOR .................. 2 HORSEPOWER
WHEELHEAD/I.D SPINDLE MOTOR ...... 10 HORSEPOWER |
|
Ad # 5386 | Cylindrical Grinders (O.D. & I.D.) |
|
Bertoni &Cotti |
TM 260 |
Very Good |
Sold |
Photo /
More Info. |
BERTONI & Cotti Crankshft Grinder, Model TM260: Includes Leeson Speedmaster, slide feed rate motor controller. |
|
Ad # 5179 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
767/1 R-Universal |
Good |
sold |
Photo /
More Info. |
14" x 30" Landis OD Grinder: Landis 767/1 R-Universal grinder
Swing: 14"
Distance Between Centers: 30"
Wheel Diam. 14"
NOTE: ID attachment on machine without ID spindle |
|
Ad # 15999 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
Type "C" (OD Plain Grinder) |
Needs Work |
sold |
Photo /
More Info. |
16" x 30": NOTE:
THIS IS A PARTS MACHINE. The wheel infeed
mechanism is not working and would require very
expensive work to repair. The rest of the
machine is in good condition
Wheel: 32" diameter x 2" wide
Face Plate: 15" diam.
DBC: 30"
Comes with a number of wheels (various)
|
|
Ad # 5196 | Cylindrical Grinders (O.D. & I.D.) |
|
Myford |
|
Good |
Sold |
Photo /
More Info. |
5"x12" MYFORD PLAIN CYLINDRICAL GRINDER: 5'X12" TABLE
Spindle speed 1,830-1,988rpm
Power in/outfeed
Coolant reservoir |
|
Ad # 7147 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
8 x 16, 28in Wheel |
Good |
Sold |
Photo /
More Info. |
Norton Tool Room OD Grinding Machine with 18" Wheel : Capacity:
Swing: 8"
DBC: 16" |
|
Ad # 1294 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
6 x 18 |
Fair |
sold |
Photo /
More Info. |
Norton OD Grinder (6" dia. x 18" BDC): Max grinding dia 6"
Max grinding length 18"
Wheel 20" dia, 2" wide
Spindle Motor 7.5 HP |
|
Ad # 11185 | Cylindrical Grinders (O.D. & I.D.) |
rebuilt |
Armstrong |
B1-232 |
Excellent |
sold |
Photo /
More Info. |
Cott -Rubber roll grinder 8" dia x 21"L: Cott Grinder
Used to gring rubber rolls
Completly rebuilt-looks new
8" Plus roll Dia
21" centers
dust collector chute
very nice machine!! |
|
Ad # 7658 | Cylindrical Grinders (O.D. & I.D.) |
|
RIBON |
RUR-1000 |
Good |
sold |
Photo /
More Info. |
11´´ X 40´´ RIBON UNIVERSAL CYLINDRICAL GRINDER: 11´´ X 40´´ RIBON UNIVERSAL CYLINDRICAL GRINDER
MAXIMUM SWING OVER TABLE ............. 11´´
DISTANCE BETWEEN CENTER .............. 40´´
LONGITUDINAL TABLE FEEDS HYDRAULIC ... 1 TO
19
FPM
GRADUATED TABLE SWIVELS .............. +/- 5
DEGREES
AUTOMATIC INFEED AT TABLE REVERSE .... YES
HEAD STOCK SWIVELS ................... 360
DEGREES
POWER WORKHEAD SPEEDS ................
95,155,225,410 RPM
GRINDING WHEEL ....................... 14´´ X
1´´
X 5´´
GRINDING WHEEL SPEEDS ................
1700/2100
RPM
DROP DOWN ID ATTACHMENT .............. YES
GRINDING WHEEL MOTOR ................. 3
HORSEPOWER
HYDRAULIC MOTOR ...................... 1-1/2
HORSEPOWER
DROP DOWN ID MOTOR ................... 1
HORSEPOWER |
|
Ad # 1257 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
Type E |
Fair |
Sold |
Photo /
More Info. |
OD Grinder 14" x 35 Universal head: 14" x 35" Capacity
Universal Head
US Variable speed drive |
|
Ad # 3733 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
CH 12x36 |
Fair |
Sold |
Photo /
More Info. |
UNIVERSAL ID/OD GRINDER: |
|
Ad # 10331 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
10 x 24 universal |
Good |
sold |
Photo /
More Info. |
10 x 24 ID and OD-universal: 10 x 24"
universal table
6" chuck 3 jaw
collet system-5C
face plate |
|
Ad # 10465 | Cylindrical Grinders (O.D. & I.D.) |
|
Heald |
273A |
Good |
Sold |
Photo /
More Info. |
Heald Model Internal Grinder : HEALD INTERNAL GRINDER
Model: 273A S/N 62549
Maximum Swing Inside Table 24.5"
Swing Inside Standard Chuck Guard 20"
Swing W/ Workhead at 90 Degree 13"
Bore Length Ground, Maximum 16"
Grinding Stroke, Minimum .125"
Grinding Stroke, Maximum 16"
Table Longitudinal Travel 20"
Wheelhead Cross-Slide Travel 1.5"
Workhead Positioning Slide Travel 17.5"
Workhead Swivel Angle, Maximum 90 Degree
Grinding Spindle Speeds, Range 0-500 RPM
Grinding Table Speeds, Infinite Variable 0-18 FPM
Power Rapid Table Traverse 18 FPM
5 HP 3500 RPM Grinding Spindle Motor
1.5 HP 3600 RPM Workhead Chuck Motor
0.5 HP Hydraulic Motor
|
|
Ad # 7662 | Cylindrical Grinders (O.D. & I.D.) |
|
CINCINNATI |
|
Good |
Sold |
Photo /
More Info. |
12´´ X 48´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 12´´ X 48´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
MAXIMUM WORK SWING ............... 12-15/16´´
DISTANCE BETWEEN CENTERS ......... 48´´
GRINDING WHEEL SIZE .............. 14´´ X 1´´ X 5´´
TABLE TRAVERSE SPEEDS (VARIABLE) . 3 TO 240 IPM
HEADSTOCK SPEEDS (VARIABLE) ...... 55 TO 500 RPM
DROP DOWN I.D. SPINDLE
PICK FEED
COOLANT
SWIVEL WHEELHEAD / WORKHEAD / TABLE
HYDRAULIC TABLE TRAVERSE
1 HORSEPOWER HEADSTOCK MOTOR
1-1/2 HORSEPOWER I.D. SPINDLE MOTOR
1 HORSEPOWER HYDRAULIC MOTOR
3 HORSEPOWER WHEELHEAD MOTOR
|
|
Ad # 9137 | Cylindrical Grinders (O.D. & I.D.) |
|
cincinatti |
OH |
Good |
Sold |
Photo /
More Info. |
OD 4 in swing x 18 inches center- 4inch plain -OH: 4 inch swing x 18" centers
14" wheel
includes original manual |
|
Ad # 7134 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
26 x 50 OD Grinder |
Fair |
sold |
Photo /
More Info. |
26" x 50" OD Landis Grinder : Swing: 26"
DBC: 50"
Diameter of grinding wheel: 28" |
|
Ad # 5260 | Cylindrical Grinders (O.D. & I.D.) |
|
Heald |
75-A |
Good |
sold |
Photo /
More Info. |
Heald ID Grinder: 9" Magnetic Chuck
1" Arbor
Chuck speed 550-1740 rpm
|
|
Ad # 10507 | Cylindrical Grinders (O.D. & I.D.) |
|
Studer |
Model RHU-450 |
Good |
sold |
Photo /
More Info. |
Studer Model RHU-450, Universal Cylindrical Grinder 12" x 30"cap: Studer Universal Cylindrical Grinder
Has Swing Down I.D. Grinding Head
Model RHU-450
Max. swing diameter 12"
Max. distance between centers 30"/34"
Max. diameter grinding wheel 12"
Table overall surface area 4.5"x38"
Table approx. feed range (variable) 0 - 20 FPM
Workhead speed range (variable) 0 - 650 RPM
Grinding wheelhead infeed range .008" - .072"
Grinding wheelhead drive motor(approx.) 2 HP
|
|
Ad # 11859 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati |
4U2B |
Excellent |
sold |
Photo /
More Info. |
10" OD, 24" length: 10" OD capacity
24" max length
12" dia. OD grinding wheel.
Has steady rests
4 jaw chuck.
lots of tooling & manuals, very little use on
machine |
|
Ad # 10507 | Cylindrical Grinders (O.D. & I.D.) |
|
Studer |
Model RHU-450 |
Good |
sold |
Photo /
More Info. |
Studer Model RHU-450, Universal Cylindrical Grinder 12" x 30"cap: Studer Universal Cylindrical Grinder
Has Swing Down I.D. Grinding Head
Model RHU-450
Max. swing diameter 12"
Max. distance between centers 30"/34"
Max. diameter grinding wheel 12"
Table overall surface area 4.5"x38"
Table approx. feed range (variable) 0 - 20 FPM
Workhead speed range (variable) 0 - 650 RPM
Grinding wheelhead infeed range .008" - .072"
Grinding wheelhead drive motor(approx.) 2 HP
|
|
Ad # 11487 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinatti |
3P1C1L-46 |
Fair |
sold |
Photo /
More Info. |
6" swing x 36" centers: Cincinatti 6" x 36" OD grinder
6" swing
36" centers
2" wide wheel |
|
Ad # 4910 | Cylindrical Grinders (O.D. & I.D.) |
|
BLM |
RC 280 |
Excellent |
Sold |
Photo /
More Info. |
LARGE BLM MADEL RC 280 CRANK SHAFT GRINDER: All Metric machine
10-12" Swing
Distance Between Chuck Faces: 47"
Distance Between Spindle Faces: 50"
Grinding Wheel: 30" diameter
Coolant System
Also Includes:
Workpiece Counter Balance Sets
Grinding Wheel Balancer
Set of Set-Up Precision Gauges
Dual Workheads, each with a 8" chuck |
|
Ad # 10165 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
14x36 |
Good |
Sold |
Photo /
More Info. |
14x36 OD grinder: 14swing x 36centers
1-1/2x14 wheels
3 new wheels with machine
7.5hp spindle
power feed all axis |
|
Ad # 9385 | Cylindrical Grinders (O.D. & I.D.) |
|
Farrel |
OD Grinder |
Good |
sold |
Photo /
More Info. |
TRAVELING-HEAD SWING REST ROLL GRINDER, 48"/56" X 378"/440" : FARREL TWO-WHEEL TRAVELING-HEAD SWING REST ROLL GRINDER, 48"/56" X 378"/440... |
|
Ad # 7791 | Cylindrical Grinders (O.D. & I.D.) |
|
Brown & Sharp |
# 13 |
Excellent |
Sold |
Photo /
More Info. |
8" x 24" OD/Universal Tool Grinder: Diameter Swing - Maximum 8"
Distance Between Centers - Maximum 20"
Travel - Longitudinal 20-1/2"
- Traverse 10-1/4"
- Vertical 8-3/8"
Wheel Size 7" x 1/2" x 1-1/4"
Grinding Wheel Speeds (3) 2730 - 5150 RPM
Workhead Speeds (4) 128 - 540 RPM
Table Travel Speeds (6) - Automatic 7.7 - 100 IPM
- Hand Slow and Fast
Table Swivels 3"/Foot Front and Back
Workhead Swivels - Counterclockwise 100 Degrees
- Clockwise 80 Degrees
Grinding Head Swivels 360 Degrees
EQUIPPED WITH:
Tailstock with #2MT Taper
Workhead with #2MT
1 HP Grinding Head Motor, 1735 RPM, 230/460 V, 3.4/1.7 Amps, 3 Phase
1/6 HP Workhead Motor, 1140 RPM, 208-220/440 V, .90/.45 Amps, 3 Phase
1/4 HP Longitudinal Feed Motor, 1725 RPM, 208-220/440 V, 1.0/.5 Amps, 3 Phase
Worklight
*Preliminary Specifications Subject to Verification.
|
|
Ad # 12715 | Cylindrical Grinders (O.D. & I.D.) |
|
Jack Mill |
|
Fair |
sold |
Photo /
More Info. |
8 x 36: Lots of tooling
8 x 36"
OD & ID spindles
hyd..are fair..but work... |
|
Ad # 7433 | Cylindrical Grinders (O.D. & I.D.) |
NA |
stanko |
3B |
Excellent |
Sold |
Photo /
More Info. |
6000MMBETWEEN CENTERS X 1500MM SWING: ROLL GRINDING MACHINE
MAX DISTANCE BETWEEN CENTERS 6000MM
MAX GRINDING DIAMETER 1500MM
CAMBERING, STEADIES, TAPER GRINDING & MICROPROSESSOR |
|
Ad # 7679 | Cylindrical Grinders (O.D. & I.D.) |
|
NORTON |
LU-4 |
Good |
Sold |
Photo /
More Info. |
14´´ X 36´´ NORTON UNIVERSAL CYLINDRICAL GRINDER: 14´´ X 36´´ NORTON UNIVERSAL CYLINDRICAL GRINDER
RATED WORK SWING ..................... 14´´
ACTUAL WORK SWING .................... 15´´
DISTANCE BETWEEN CENTERS ............. 36´´
GRINDING WHEEL SIZE .................. 14´´ X 1-1/2´´ X 5´´
GRINDING WHEEL SPEED ................. 1750 RPM
I.D. SPINDLE SPEED ................... 3400 RPM
WORKHEAD SPEEDS (VARIABLE) ........... 40 TO 400 RPM
SWIVEL WORKHEAD,WHEELHEAD & TABLE .... YES
COOLANT .............................. YES
DWELL ................................ YES
HYDRAULIC MOTOR ...................... 1 HORSEPOWER
WORKHEAD MOTOR ....................... 3/4 HORSEPOWER
GRINDING WHEEL MOTOR ................. 3 HORSEPOWER |
|
Ad # 7264 | Cylindrical Grinders (O.D. & I.D.) |
|
BROWN & SHARPE |
No.4 |
Excellent |
Sold |
Photo /
More Info. |
14” x 60”cc No.4 BROWN & SHARPE Universal cylindrical Grinder: 14” x 60”cc No.4 BROWN & SHARPE Universal cylindrical Grinder with swing-do... |
|
Ad # 4913 | Cylindrical Grinders (O.D. & I.D.) |
|
Cincinnati |
5U4D5SN-1 |
Good |
SOLD |
Photo /
More Info. |
Universal (ID/OD) Cylindrical Grinder: Just Arrived!!! More information to follow |
|
Ad # 6614 | Cylindrical Grinders (O.D. & I.D.) |
|
JONES & SHIPMAN |
1314 |
Very Good |
sold |
Photo /
More Info. |
8" X 24" JONES & SHIPMAN MODEL 1314 HYD UNIVERSAL CYLINDRICAL GRINDER: 8" X 24" JONES & SHIPMAN MODEL 1314 TOOLROOM
HYDRAULIC UNIVERSAL CYLINDRICAL GRINDER
MAXIMUM DIAMETER GROUND: 8"
GRINDING LENGTH BETWEEN CENTERS: 24"
HYDRAULIC TABLE SPEEDS: 3 TO 144 IPM
FEED RATES: 0.0002" TO 0.0012"
WHEEL SIZE: 8" X 3/4" X 1-1/4"
WHEELHEAD CROSS TRAVEL: 6"
WORKHEAD SPEEDS: (6) 36 TO 500 RPM
WHEELHEAD SPEEDS: (4) 2800 TO 4180 RPM
EQUIPPED WITH:
RISE & FALL WHEELHEAD
SWIVEL TABLE
SWIVEL WHEELHEAD
COOLANT TANK & PUMP
ONE-SHOT LUBRICATION
TAILSTOCK |
|
Ad # 14253 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
Type 1R |
Good |
sold |
Photo /
More Info. |
10" Swing x 20" between centers: Landis Universal Cylindrical Grinder
Model: Type 1R
Capacity: 10" swing x 20" between centers
Electrical: 230/ 3 phase
Maximum Swing over Table 10"
Distance between Centers 20"
Table Traverse Speed2-240 IPM
Traverse Handwheel Graduation.001"
Traverse per Turn of Handwheel.200"
Swivel Table Graduated Degrees Included Angle
20°
Swivel Table Graduated Degrees Inches per Foot
4"
Headstock Center#10 Jarno
Tailstock Center#6 Jarno
Headstock Swivel120°
Standard Grinding Wheel Size12" x 1" x 5"
Maximum Width Full Wheel1.5"
Wheel Spindle Speed2000 & 2530 RPM
Maximum Hydraulic Infeed.090
Rapid Infeed Stroke1"
Grinding Wheel Swivel90° L-R
|
|
Ad # 5563 | Cylindrical Grinders (O.D. & I.D.) |
|
JONES & SHIPMAN |
1070 |
Good |
Sold |
Photo /
More Info. |
12" x 6" Plain OD Grinder: 12" x 6" Plain OD Grinder
Swing: 10 "
6" Swing 12" Centers Jones & Shipman 1070 OD GRINDER, 10" WHEEL, HYD. TABLE/AUTO INFEED/PLUNGE/RAPID
6" Od Grinder, Jones & Shipman 1070 10" Wheel, Hyd. Table/Auto Infeed/Plunge/Rapid
Std Specs Below-please verify
6" X 12" JONES & SHIPMAN (MADE IN U.K.)
SUPER-PRECISION" PLAIN CYLINDRICAL GRINDER
MODEL:1070
MAXIMUM SWING ..................................... 6"
DISTANCE BETWEEN CENTERS .......................... 12"
TABLE SWIVEL INCLUDED ANGLE:
CLOCKWISE ................................ 20 DEGREES
COUNTERCLOCKWISE ......................... 20 DEGREES
LONGITUDINAL TABLE SPEED (HYDRAULIC) ... 3" TO 240" IPM
ONE REVOLUTION OF HANDWHEEL ...................... 3/4"
FINE FEED KNOB GRADUATIONS .................... 0.0005"
WHEELHEAD:
TRAVERSE ON SCREW (MAX.) ........................... 3"
POWER RAPID ADVANCE/RETRACTION STROKE .............. 1"
CROSS FEED HANDWHEEL GRAD. .................... 0.0002"
ONE DEPRESSION OF FINE FEED LEVER KNOB ........ 0.0001"
AUTO INFEED @ TABLE REVERSALS ...... 0.0001" TO 0.0006"
FEED @ REVERSAL OF TABLE,
REDUCTION IN DIAMETER .............. 0.000002" TO .002"
CONTINUOUS (PLUNGE) INFEED RATE ..... 0.0001" TO .0006"
(PLUNGE) REDUCTION IN DIA. FROM ... 0.004" TO .072" IPM
MAX. RANGE OF PLUNGE INFEED ... 0.8 REV. OF THE HANDWHEEL
WHEELHEAD SLIDE ADJUSTMENT ....................... 7"
SWIVEL OF WHEELHEAD ............. 8 DEGREES (CLOCKWISE)
WHEEL SIZE .............................. 10" X 1" X 3"
WHEEL SPEEDS (2) .................... 2,120 & 2,500 RPM
WHEELHEAD MOTOR ................................ 2.0 HP
WORKHEAD SPINDLE SPEEDS, INF. VARIABLE ... 75 TO 750 RPM
WORKHEAD & TAILSTOCK SPINDLE TAPERS .............. #1MT
APPROX. FLOOR SPACE REQUIRED ................ 66" X 40"
APPROX. MACHINE WEIGHT ...................... 3,360 LBS
HYDRAULIC OPERATION FEATURING:
- POWER TABLE TRAVERSE
- AUTO INFEED
- DUAL RATE (COARSE/FINE) PLUNGE (CONTINUOUS) INFEED
W/DUAL RATE PLUNGE INDICATOR FEED SELECTOR
- POWER RAPID WHEELHEAD ADVANCE & RETRACTION
SPARKOUT TIMER (0 TO 30 SECONDS)FOR AUTO INFEED
& PLUNGE CYCLES
FINE FEED MECHANISM FOR INFEED OF WHEELHEAD
FINE FEED KNOB FOR TABLE TRAVERSE
DUAL LIVE/DEAD WORKHEAD SPINDLE W/INFINITELY
VARIABLE SPINDLE SPEEDS
WORKHEAD SWIVELS
COOLANT SYSTEM
5" 3-JAW CHUCK
WORK LIGHT
3 H.P. WHEELHEAD MOTOR
3/60/220-440 VOLT ELECTRICS
|
|
Ad # 885 | Cylindrical Grinders (O.D. & I.D.) |
11/85 |
STUDER |
S40-12 |
Very Good |
sold |
Photo /
More Info. |
CNC UNIVERSAL O.D. GRINDER 10" X 24": UNIVERSAL SWIVEL HEAD; OD only
Two (2) OD Wheels
FILTER SYSTEM;
24" CENTERS;
APPROX 10" SWING; ONLY 7,462 HRS;
COOLANT FILTRATION SYSTEM WITH SKIMMER
REMOTE PENDANT CONTROL
HYDRAULIC
UNIVERSAL TABLE
OD CNC
got over 57K in it!
new boards included!! |
|
Ad # 885 | Cylindrical Grinders (O.D. & I.D.) |
11/85 |
STUDER |
S40-12 |
Very Good |
sold |
Photo /
More Info. |
CNC UNIVERSAL O.D. GRINDER 10" X 24": UNIVERSAL SWIVEL HEAD; OD only
Two (2) OD Wheels
FILTER SYSTEM;
24" CENTERS;
APPROX 10" SWING; ONLY 7,462 HRS;
COOLANT FILTRATION SYSTEM WITH SKIMMER
REMOTE PENDANT CONTROL
HYDRAULIC
UNIVERSAL TABLE
OD CNC
got over 57K in it!
new boards included!! |
|
Ad # 2483 | Cylindrical Grinders (O.D. & I.D.) |
50's |
CINCINNATI SENDZIMIR |
LR |
Good |
Sold |
No Photo /
More Info. |
14” X 72” CINCINNATI SENDZIMIR CNC ROLL GRINDER: Swing Over Bed: 15 ½”
Max. Roll Length: 102 ½”
Max. Roll Weight: 6500 Lbs.
Workhead Type: Dead
Workhead Speeds, Programmable: 0-300 rpm
Max. Grinding Wheel Size: 24” x 2” x 12” Standard
CNC System: KPM 5
Infeed Screw: Ballscrew
Footstock Type Handwheel
Footstock Center: #13 B&S
rebuilt 90-91
|
|
Ad # 10172 | Cylindrical Grinders (O.D. & I.D.) |
60's |
Landis |
|
Very Good |
Sold |
Photo /
More Info. |
16 X 96: 16" swing x 96"
This machine is in excellent running condition.
Wheel : 24"
Swing: 16"
Distance between the centers: 96"
Approx Weight: 33,000 lbs |
|
Ad # 864 | Cylindrical Grinders (O.D. & I.D.) |
70's |
Cincinatti |
3P2D1L-106 |
Good |
Sold |
Photo /
More Info. |
O.D. Grinder 10 x 36": variable speed, coolant; under power |
|
Ad # 8056 | Cylindrical Grinders (O.D. & I.D.) |
70'S ? |
CRYSTAL LAKE |
608 |
Very Good |
sold |
Photo /
More Info. |
6" SWING, 10" BETWEEN CENTERS: THIS IS A VINTAGE, BELT DRIVEN MACHINE THAT
STILL PERFORMS LIKE NEW. SEPARATE BELTS AND
MOTORS DRIVE THE THE GRINDING WHEEL AND
THE WORKPIECE. THE WORKPIECE SPEED IS
VARIABLE. LUBRICATION IS WITH "OIL POTS".
THIS MACHINE IS STILL POWERED UP AND
OCCASIONALLY IS USED FOR PRODUCTION.
Ultra tight Tolerance - 0.0001 no problem
yes has positive stop on the slide
7" std wheel included
6" swing x 10" centers
free standing
coolant
all guarding
no collets
no manuals |
|
Ad # 464 | Cylindrical Grinders (O.D. & I.D.) |
70's |
Norton |
Angle Grinder # CV5 |
Good |
Sold |
Photo /
More Info. |
10" x 48" Norton Angle Grinder, Type CV-5: 10" X 48" NORTON MODEL CV5 PLAIN CYLINDRICAL ANGLE HEAD GRINDER
EQUIPPED WITH:
6" x 30" WHEEL CAPACITY
TAILSTOCK
DEAD HEADSTOCK
WHEEL GUARD WHEEL MOUNT
110 VOLT PUSH BUTTON CONTROLS
220/440/3/60 AC MOTOR TO WHEEL
HYDRAULIC POWER INFEED WHEEL SLIDE
SEMI AUTOMATIC WHEEL DRESSER WITH COMPENSATION
COOLANT SYSTEM
HAND TABLE MOVEMENT
ATTACHED ELECTRICAL PANEL
BASE MOUNT BEHIND THE WHEEL
|
|
Ad # 9149 | Cylindrical Grinders (O.D. & I.D.) |
72? |
Landis |
2R |
Good |
Sold |
Photo /
More Info. |
OD Grinder 14swing x 36 centers: OD grinder
# 2R
14" swing x 36 in center dist
14 " wheel
Swivel/universal head
8" 3 jaw chuck
Std specs below-please verify
Normal work swing 6"-10"
Maximum work swing over table 6 31/32"
Nominal distances between work centers 18"-30"
Maximum work swing and diameter standard machine will grind with full standard wheel on machine with hydraulic infeed strokes 6" - 2" H.I. May be smaller on angular wheelhead machine because of work piece configuration
mimimum diameter wheel to grind zero diameter work on center 15". May be smaller on angular wheelhead machine because of work piece configuration
Coolant tank capacity 19 gallons
Hydraulic tank capacity 19 gallons
WORK CARRIAGE
Traverse speed - inches per minute 2 to 240 all lengths thru 72" 96" 120"
Traverse speed per turn of handwheel slow 0.100" fast 1.000"
Work rest capacity 1/4" to 2 1/2" - 6" 1/4" to 4" - 10"
WHEELHEAD AND WHEELFEED
Grinding wheel size 24" x 2" x 12"
Grinding wheel maximum width 5"
Grinding wheel spindle speeds rpm 1000/1271
Grinding wheel minimum diameter of worn wheel 15". May be larger on angular wheelhead machines because of workpiece configuration
Automatic infeed at table reversal on diameter basic machine 0.0003" to 0.004". Machine with hydraulic infeed 0.0002" to 0.004"
Distance wheel centerline to work centerline hydraulic infeed machine max 18", min. 7 1/2"
Work diameter reduction per revoution of wheelfeed handwheel 0.100"
Work diameter reduction per revolution of fine feed knob basic machine 0.010" hydraulic infeed 0.001"
Maximum hydraulic infeed on diameter for hydraulic infeed machines 0.090"
Rapid infeed stroke for hydraulic infeed machine max 2" min. 1/2"
HEADSTOCK AND FOOTSTOCK
Work centers footstock center movement by #10 jarno levers only
Headstock work speeds rpm dead spindle 94-154-246-400 live spindle 1000-154-240-400
ELECTRIC MOTORS
Wheel drive motor 7 1/2 hp
Wheel spindle lubrication pump motor 1/4 hp
Work drive motor 1/2 hp
|
|
Ad # 9144 | Cylindrical Grinders (O.D. & I.D.) |
87 reman |
Heald |
OG/271 toolroom |
Good |
sold |
Photo /
More Info. |
ID grinder 20 x 20": 20 x 20 capacity
12" 4 jaw chuck
Univ swivel head
speed adj
10 HP0G6606 GRINDERS, INTERNAL
MODEL #271 HEALD INTERNAL GRINDER
EQUIPPED WITH:
Power Draw Bar Wheel Guard Cover For Head
Hydraulic Tank Power Feed On End Table
Feed Box Spindle Motor
Speed Vari=Drive Motor on Work Spindle Coolant Tank
Cash Head Conjugate Sine Bar
CATALOG SPECIFICATIONS: std specs verify
Swing Over Table (Straight Work), Diameter .... 18"
Swing Inside Standard Chuck Guard, Diameter ... 12"
Hole Length Ground, Maximum ................... 5"
Hole Diameter Ground .......................... 1/8" - 5-1/2"
Included Angle Taper, Maximum ................. 60 degree
Grinding Speed ................................ 0 - 20 FPM
Rapid Traverse ................................ 35 FPM
Workhead Speeds ............................... 400, 266, 200, 133 RPM
Floor Space W/Coolant Tank .................... 93" x 85"
Net Weight, Approximate ....................... 7400 lbs.
|
|
Ad # 11330 | Cylindrical Grinders (O.D. & I.D.) |
90's ? |
Enprotech/CCI |
G10-20 |
Very Good |
sold |
Photo /
More Info. |
10 x 20 OD: Used OD Grinder ENproteck/CCI G10-20
10"Dia x 20" length
50-300 RPM
5 HP
coolant tank w paper filter
uses half dead carbide centers
NO ID spindle but has drop down attach arm for one to be mounted
Wheel: 14 x 1.5"
DRO-on infeed
ways look great--little use on machine
no manuals
some tooling |
|
Ad # 5618 | Cylindrical Grinders (O.D. & I.D.) |
94?? |
Bickford/G&L |
FR-200 |
Very Good |
sold |
Photo /
More Info. |
Universal OD/ID Grinder with CAM Grinding Capabilities: Table: 13" x 59"
swing 8" max
Tailstock attachment
Swivel Wheelhead with 8" vertical Movement
Wheelhead has 3 Spindles Mounted on it:
2 OD Wheels-thru type --one on each end
1 ID Spindle
Includes cams for tap grinding:
ID Grinding attach included
a few 5C tap collets
ID spindle is a Precise Grinding spindle , 3" diam. with Precise variable speed drive.
Workhead: Swivels
Workhead Drive: 1/2 hp @ 115V |
|
Ad # 9222 | Cylindrical Grinders (O.D. & I.D.) |
96 |
Jackmill |
JMAC600CNC |
Very Good |
Sold |
Photo /
More Info. |
angular cnc OD 10.2" swing x 23.6": Fanuc 21I-TB control
Rs232 # JMA-C-600/ENC2N
coolant and paper filter
w/ parts gaging sys
includes trasformer
CNC CYLINDRICAL GRINDER
(ANGULAR TYPE)
JMAC-600 CNC-2N std specs verify below
Capacity Distance between Centers M.M. 600
Max. Grinding Diameter M.M. Ø260
Work Table Travel per Handwheel Rotation M.M./REV 0.1,1,10
Workhead
& Tailstock Workhead Work Center Taper M.T. NO.4
Tailstock Work Center Taper M.T. NO.4
Workhead Spindle Speed R.P.M 50-600
Wheelhead Grinding Wheel Size (OD.x Width x ID.) M.M. Ø405x50xØ127 ??
Grinding Wheel Swivel ±30°
Shipping Dimension C.M. 220x200x180
Net Weight KGS 2500
|
|
Ad # 7663 | Cylindrical Grinders (O.D. & I.D.) |
1941 |
cincinnati |
1P5D1L-8 |
Good |
Sold |
Photo /
More Info. |
16in x 36in: 16"x36"
3"x30"grinding wheel
20hp |
|
Ad # 11486 | Cylindrical Grinders (O.D. & I.D.) |
1941 |
Norton |
15 x 72 |
Fair |
sold |
Photo /
More Info. |
OD grinder 15" swing x 72"centers: Norton OD grinder 15" swing x 72"centers
DC vari drive upgraded to work head
15" swing over bed
72" centers
15HP
12"Dia x 2"wide wheel
rigging fee to load:$1200.00 |
|
Ad # 7654 | Cylindrical Grinders (O.D. & I.D.) |
1941 |
CINCINNATI |
|
Good |
Sold |
Photo /
More Info. |
10´´ X 72´´ CINCINNATI PLAIN CYLINDRICAL GRINDER: 10´´ X 72´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
MAXIMUM SWING OVER TABLE .......... 10-15/16´´
MAXIMUM CENTER DISTANCE ........... 72´´
GRINDING WHEEL SIZE ............... 30´´ X 3´´ X 12´´
GRINDING WHEEL SPEED .............. 830 RPM
WORKHEAD SPEEDS ................... 62 TO 263 RPM
TABLE TRAVERSE SPEEDS ............. 3 TO 220 IPM
AUTOMATIC INFEED .................. YES
COOLANT ........................... YES
SWIVEL TABLE ...................... YES
TABLE MOUNTED DRESSER ............. YES
GRINDING WHEEL MOTOR .............. 15 HORSEPOWER
WORKHEAD MOTOR .................... 1 HORSEPOWER
HYDRAULIC MOTOR ................... 1-1/2 HORSEPOWER |
|
Ad # 11488 | Cylindrical Grinders (O.D. & I.D.) |
1941 |
Norton |
6 x 48 |
Fair |
sold |
Photo /
More Info. |
OD grinder 6" x 48": Norton OD Grinder 6 x 48"
3" wide wheel |
|
Ad # 9251 | Cylindrical Grinders (O.D. & I.D.) |
1942 |
Norton |
10 x 24 |
Good |
sold |
Photo /
More Info. |
Plunge Univ. Clylindrical OD: 10" swing over bed x 24 centers
26" x 2 Wheel
coolant
OD gage (indicator)flip over to check part
will hold tolerance of 0.0003 |
|
Ad # 7678 | Cylindrical Grinders (O.D. & I.D.) |
1942 |
CINCINNATI |
ER |
Good |
sold |
Photo /
More Info. |
12´´ X 72´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 12´´ X 72´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
SWING OVER BED ...................... 12-1/2´´
DISTANCE BETWEEN CENTERS ............ 72´´
HYDRAULIC TABLE TRAVEL .............. 3 TO 220 IPM
AUTOMATIC INFEED .................... .002´´ TO .0125´´
WORKHEAD SPEEDS (VARIABLE) .......... 55 TO 500 RPM
GRINDING WHEEL ...................... 14´´ X 1-1/2´´
DROP DOWN ID ATTACHMENT
TABLE MOUNTED DRESSER
5´´ STEADY REST
BACKREST
COOLANT
3 HORSEPOWER WHEELHEAD MOTOR
1-1/2 HORSEPOWER HYDRAULIC MOTOR
1 HORSEPOWER VARIABLE SPEED WORKHEAD MOTOR
3/4 HORSEPOWER ID WHEELHEAD MOTOR |
|
Ad # 7656 | Cylindrical Grinders (O.D. & I.D.) |
1946 |
CINCINNATI |
|
Good |
Sold |
Photo /
More Info. |
14´´ X 36´´ CINCINNATI PLAIN CYLINDRICAL GRINDER: 14´´ X 36´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
SWING OVER TABLE ................... 14-1/4´´
MAXIMUM DISTANCE BETWEEN CENTERS ... 37´´
WORKHEAD SPEEDS .................... 40 TO 160 RPM
TABLE FEEDS ........................ (24) 3-1/2 to 120 IPM
AUTO INFEED AT TABLE REVERSAL
STANDARD GRINDING WHEEL ............ 30´´ DIAMETER X 3´´ FACE
RAPID TRAVERSE OF WORK HEAD ........ 16 IPR
COOLANT
20 HORSEPOWER MAIN MOTOR
1 HORSEPOWER/VARIABLE SPEED WORKHEAD MOTOR |
|
Ad # 13018 | Cylindrical Grinders (O.D. & I.D.) |
1948 |
Norton |
C-22714 |
Good |
sold |
Photo /
More Info. |
12" Between Centers: Norton O D Grinder
Model # C-22714
12" Between Centers
12" x 1" Grinding Wheel |
|
Ad # 9171 | Cylindrical Grinders (O.D. & I.D.) |
1950's ? |
Landis |
374-6 |
Good |
sold |
Photo /
More Info. |
ID & OD :12 x 28 uninersal: ID & OD Grinder-Univ & tool grinder
Head has ID acc-universal
12" x 28"
dresser universal
Hibco head-sold seperatly-for 2K
digital readout
manual
|
|
Ad # 15603 | Cylindrical Grinders (O.D. & I.D.) |
1950 |
Cincinnati |
|
Good |
sold |
Photo /
More Info. |
14" X 36": Cicinnati ID OD grinder all attachments under
power.
14 x 36" |
|
Ad # 7681 | Cylindrical Grinders (O.D. & I.D.) |
1950 |
LANDIS |
C |
Good |
Sold |
Photo /
More Info. |
14´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER: 14´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER
SWING OVER BED .......................... 14´´
DISTANCE BETWEEN CENTERS ................ 96´´
HYDRAULIC TABLE TRAVEL .................. 3 TO 144 IPM
VARIABLE SPEED WORKHEAD
DIAMETER OF GRINDING WHEEL .............. 14´´
WIDTH OF WHEEL .......................... 1-1/2´´
BACKREST
COOLANT
3/4 HORSEPOWER VARIABLE SPEED WORKHEAD MOTOR
5 HORSEPOWER WORKHEAD MOTOR
3 HORSEPOWER HYDRAULIC MOTOR |
|
Ad # 6450 | Cylindrical Grinders (O.D. & I.D.) |
1952 |
CINCINNATI |
|
Very Good |
sold |
Photo /
More Info. |
10´´ X 24´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 10" X 24" CINCINNATI UNIVERSAL CYLINDRICAL
GRINDER:
TYPE ................................ KNEE HOLE
SWING OVER BED - MAXIMUM ............ 11´´
MAXIMUM CENTER DISTANCE............ 24´´
HYDRAULIC TABLE TRAVERSE ............ YES
AUTOMATIC INFEED AT TABLE REVERSAL .. YES
VARIABLE SPEED WORKHEAD ............. YES
GRINDING WHEEL SIZE ................. 12´´ DIA. X
1´´ W
INTERNAL GRINDING ATTACHMENT ........ YES
COOLANT ............................. YES
DRESSER MOUNTED ON TAILSTOCK ........ YES
SWIVEL .............................. TABLE -
WORKHEAD - WHEELHEAD
WHEELHEAD MOTOR ..................... 2
HORSEPOWER
I.D. SPINDLE MOTOR .................. 1
HORSEPOWER
WORKHEAD MOTOR ...................... 1/4
HORSEPOWER |
|
Ad # 7655 | Cylindrical Grinders (O.D. & I.D.) |
1952-53 |
LANDIS |
CH |
Very Good |
sold |
Photo /
More Info. |
10´´ X 96´´ LANDIS PLAIN CYLINDRICAL GRINDER: 10´´ X 96´´ LANDIS PLAIN CYLINDRICAL GRINDER
SWING OVER BED .......................... 10-3/4´´
DISTANCE BETWEEN CENTERS ................ 96´´
HYDRAULIC TABLE TRAVERSE ................ 3 TO 130 IPM
AUTOMATIC INFEED AT TABLE REVERSAL ...... .00025´´ TO .003´´
WORK HEAD SPEEDS ........................ 54, 76, 107, 150 RPM
DIAMETER OF GRINDING WHEEL .............. 30´´
WIDTH OF GRINDING WHEEL ................. 3´´
GRINDING WHEEL SPEEDS ................... 810 & 995 RPM
TAPER IN HEADSTOCK AND FOOT STOCK ....... #14 JARNO
COOLANT
15 HORSEPOWER WHEEL HEAD MOTOR
3 HORSEPOWER HYDRAULIC MOTOR
1 HORSEPOWER WORK HEAD MOTOR |
|
Ad # 14895 | Cylindrical Grinders (O.D. & I.D.) |
1953 |
Brown & Sharp |
# 2 |
Good |
sold |
Photo /
More Info. |
ID/OD grinder: 14" swing x 30" centers: Brown & Sharp Universal ID/OD grinder # 2 S/N#521-2-11
ID/OD grinder: 15" max swing x 30" centers
swivel table and head-universal
grinding wheel: 16" dia
Std specs below-please verify actual machine
14" X 30" BROWN & SHARPE UNIVERSAL
I.D./O.D. CYLINDRICAL GRINDER
MODEL:#2 S/N: 521-2-11 NEW: 1953
NOMINAL SWING ................... 14"
DISTANCE BETWEEN CENTERS, NOMINAL ... 30"
DISTANCE BETWEEN CENTERS, MAX ... 33-3/4"
WHEELHEAD MOTOR ........... 3 HP
WHEELHEAD SPINDLE SPEEDS (3) .... 2100, 2400 & 2800 RPM
WHEEL SIZE .......... 14" X 1-1/2" X 5"
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG.
WHEEL SPINDLE SWIVELS ...........90 DEG.
HEADSTOCK MOTOR ............. 1/2 HP
HEADSTOCK SWIVELS ........... 180 DEG.
INFINITELY VARIABLE SPINDLE SPEEDS ..... 25 TO 500 RPM
SPINDLE NOSE ............... A2-6"
INFINITELY VARIABLE TABLE SPEED ........ 3" TO 150" IPM
TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1" SLOW
0.1" FAST
DWELL @ TABLE REVERSAL .. 0 TO 2-1/2" SECONDS
SWIVEL TABLE - TAPER PER FOOT .... 5" BACK
1-1/2" FORWARD
- SCALES FOR ANGULAR SETTING 12 DEG. BACK
3 DEG. FORWARD
AUTOMATIC CROSS FEED, INF. VARIABLE 0.0001" - .003"
POSITIVE STOP SETTING ...... 0.00002"
APPROXIMATE MACHINE WEIGHT ...... 8,300 LBS
DIMENSIONS ..... 112"W X 62"L X 61"H
EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT-off machine now but have it
HYDRAULIC OPERATOR FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-AUTOMATIC PLUNGE INFEED
RIGHT OR LEFT END WHEEL MOUNTING
DOUBLE SWIVEL WHEELHEAD - SWIVELLING @ WHEEL
SPINDLE HEAD OR @ THE WHEEL SLIDE PERMITS ANY
COMPOUND SETTING REQUIRED IN COMBINATION
STRAIGHT AND TAPER GRINDING
DUAL DEAD/LIVE HEADSTOCK SPINDLE
PULL-OUT HYDRAULIC SYSTEM
COOLANT SYSTEM
CHUCK IS MOUNTED ON WORKHEAD SPINDLE
WORK LIGHT
PRESENTLY WIRED FOR 3/60/220 VOLTS
Note: very nice running grinder! |
|
Ad # 13173 | Cylindrical Grinders (O.D. & I.D.) |
1953 |
Norton |
10x24 |
Good |
sold |
Photo /
More Info. |
10X24?: Norton 10 x 24 OD grinder
wheel size: 24" x 1.5"wide x 9.5" hole
loading fee $1200.00 |
|
Ad # 14895 | Cylindrical Grinders (O.D. & I.D.) |
1953 |
Brown & Sharp |
# 2 |
Good |
sold |
Photo /
More Info. |
ID/OD grinder: 14" swing x 30" centers: Brown & Sharp Universal ID/OD grinder # 2 S/N#521-2-11
ID/OD grinder: 15" max swing x 30" centers
swivel table and head-universal
grinding wheel: 16" dia
Std specs below-please verify actual machine
14" X 30" BROWN & SHARPE UNIVERSAL
I.D./O.D. CYLINDRICAL GRINDER
MODEL:#2 S/N: 521-2-11 NEW: 1953
NOMINAL SWING ................... 14"
DISTANCE BETWEEN CENTERS, NOMINAL ... 30"
DISTANCE BETWEEN CENTERS, MAX ... 33-3/4"
WHEELHEAD MOTOR ........... 3 HP
WHEELHEAD SPINDLE SPEEDS (3) .... 2100, 2400 & 2800 RPM
WHEEL SIZE .......... 14" X 1-1/2" X 5"
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG.
WHEEL SPINDLE SWIVELS ...........90 DEG.
HEADSTOCK MOTOR ............. 1/2 HP
HEADSTOCK SWIVELS ........... 180 DEG.
INFINITELY VARIABLE SPINDLE SPEEDS ..... 25 TO 500 RPM
SPINDLE NOSE ............... A2-6"
INFINITELY VARIABLE TABLE SPEED ........ 3" TO 150" IPM
TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1" SLOW
0.1" FAST
DWELL @ TABLE REVERSAL .. 0 TO 2-1/2" SECONDS
SWIVEL TABLE - TAPER PER FOOT .... 5" BACK
1-1/2" FORWARD
- SCALES FOR ANGULAR SETTING 12 DEG. BACK
3 DEG. FORWARD
AUTOMATIC CROSS FEED, INF. VARIABLE 0.0001" - .003"
POSITIVE STOP SETTING ...... 0.00002"
APPROXIMATE MACHINE WEIGHT ...... 8,300 LBS
DIMENSIONS ..... 112"W X 62"L X 61"H
EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT-off machine now but have it
HYDRAULIC OPERATOR FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-AUTOMATIC PLUNGE INFEED
RIGHT OR LEFT END WHEEL MOUNTING
DOUBLE SWIVEL WHEELHEAD - SWIVELLING @ WHEEL
SPINDLE HEAD OR @ THE WHEEL SLIDE PERMITS ANY
COMPOUND SETTING REQUIRED IN COMBINATION
STRAIGHT AND TAPER GRINDING
DUAL DEAD/LIVE HEADSTOCK SPINDLE
PULL-OUT HYDRAULIC SYSTEM
COOLANT SYSTEM
CHUCK IS MOUNTED ON WORKHEAD SPINDLE
WORK LIGHT
PRESENTLY WIRED FOR 3/60/220 VOLTS
Note: very nice running grinder! |
|
Ad # 7659 | Cylindrical Grinders (O.D. & I.D.) |
1956 |
CINCINNATI |
ER |
Good |
Sold |
Photo /
More Info. |
12´´ X 36´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 12´´ X 36´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
SWING OVER BED ....................... 12-1/2´´
MAXIMUM CENTER DISTANCE .............. 36´´
HYDRAULIC TABLE FEED ................. 3 TO 240 IPM
PICK FEED AT TABLE REVERSE
VARIABLE SPEED WORKHEAD
WHEEL SIZE ........................... 12´´ X 1´´ X 6´´
COOLANT
3 HORSEPOWER WHEELHEAD MOTOR
1 HORSEPOWER HYDRAULIC MOTOR |
|
Ad # 7151 | Cylindrical Grinders (O.D. & I.D.) |
1957 ? |
Heald |
271 Tool Room |
Excellent |
sold |
Photo /
More Info. |
Heald 271 ID Grinder with Extra ID Spindles : Swing: 22"
Grinding Capacity: 12" x 5"
not universal or tilting head type
chuck has a fine adjust base screw for a taper adjustment
auto feeds both directions w/miltiple stops
chuck:12" 4 jaw
coolant external tank 10 gallon
spindle bore: 3" thru hole in chuck, machine has 2" dia bore-approx 15" deep down to 1" bore out back end
Includes: Two (2) Red Head ID spindles (one is a 14,000 rpm)
Price includes:
All Documents, Spares Package of misc. parts, drive belts and numerous ID grinding wheels
NOTE: Bought from Government Surplus - hardly used at all! |
|
Ad # 1589 | Cylindrical Grinders (O.D. & I.D.) |
1958 |
Jones & Shipman |
# 1300 |
Good |
sold |
Photo /
More Info. |
Jones & Shipman OD/ID Grinder: swing type universal ID spindle on head |
|
Ad # 6799 | Cylindrical Grinders (O.D. & I.D.) |
1960 |
TOS |
7U/630/3000 |
Good |
sold |
No Photo /
More Info. |
: more informations on request |
|
Ad # 11656 | Cylindrical Grinders (O.D. & I.D.) |
1960s |
Norton |
CV4 |
Very Good |
sold |
Photo /
More Info. |
10" x 36" Angle Head Grinder: Norton CV4
10" x 36"
24" Diameter Grinding wheel
Coolent
|
|
Ad # 11657 | Cylindrical Grinders (O.D. & I.D.) |
1960s |
cinncinati |
14" x 72" |
Very Good |
sold |
Photo /
More Info. |
14" x 72" Angle Head Grinder: Cinncinati 30 Degree Angle Head Grinder
30" Diameter Wheel
14" Swing over Table
72" Between Centers
Semi-automatic
|
|