Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9251 | Cylindrical Grinders (O.D. & I.D.) |
1942 |
Norton |
10 x 24 |
Good |
sold |
Photo /
More Info. |
Plunge Univ. Clylindrical OD: 10" swing over bed x 24 centers
26" x 2 Wheel
coolant
OD gage (indicator)flip over to check part
will hold tolerance of 0.0003 |
|
Ad # 8778 | Cylindrical Grinders (O.D. & I.D.) |
|
Cincinnati |
D-E |
Very Good |
Sold |
Photo /
More Info. |
14 x 36: MAKE: CINCINNATI MILACRON
TYPE: UNIVERSAL GRINDER
MODEL: D-E
CAPACITY: 14' OR 355.6MM DIA. AND 36' OR 914.4MM IN LENGTH
SERIAL# 353213D73-0006
CONTROL VOLTAGE: 115-120VAC 50/60 HERTZ
AC INPUT POWER 230VAC 3 PHASE 50/60 HERTZ
FULL LOAD AMPS: 30 AMPERES
TERMS AND CONDITIONS:
SPECIFICATIONS AND EQUIPMENT SUBJECT TO VERIFICATION WITH CORPORATE APPROVAL
FULL PAYMENT DUE PRIOR TO MACHINE PREPARATION FOR SHIPMENT
SUBJECT TO AVAILABILIty
collector with it
|
|
Ad # 12907 | Cylindrical Grinders (O.D. & I.D.) |
1996 |
Tripet |
TST-250 |
Good |
sold |
Photo /
More Info. |
28" OD: Tripet TST 250
Updated Usach Control Yr 2008
28" Swing Max
12,000 Rpm Machine Spindle Speed
ID / OD Spindles
Diamond Dresser
Travels
14" x 24"
Coolent Pump |
|
Ad # 5185 | Cylindrical Grinders (O.D. & I.D.) |
1977 |
Studer |
RHU-400/125-C |
Very Good |
sold |
Photo /
More Info. |
Studer 5" x 16" Hydraulic Universal OD Grinder: OD grinder
Max Swing: 5" (125mm)
Distance Between Centers: 16" (400mm)
Travel in X: 17.5" (440 mm)
Grinding Wheel (left side) Specifications:
Diameter 16"
Max Width: 2"
Bore: 127 mm
Power: 4 hp
Workhead Swivel: 90 deg
Work Table Swivel: 15 deg(?)
Wheelhead Swivel: 45 deg
Workhead Spindle Nose: MT 5
Workhead Speed Range: 30 - 675 rpm
Table Speeds: 0.05 - 5.5 meters/min (2-220 ipm)
Dresser Holder mounted onto Tailstock(footstock)
Taper Micro Correction on Tailstock(footstock)
Full Coolant and Filtration System
in operation when taken out of service-will hold
0.000050 millionths tolerance |
|
Ad # 2484 | Cylindrical Grinders (O.D. & I.D.) |
1977 |
Landis |
3R |
Excellent |
SOLD |
Photo /
More Info. |
14" x 96" Landis 4R CNC Sendzimir Roll Grinder: SWING OVER BED: 14.7"
DISTANCE BETWEEN CENTERS: 96"
MAX WEIGHT OF ROLL: 1,500 LBS.
WHEEL SIZE: 18" X 2" X 5"
WHEEL HEAD HORSEPOWER: 7.5HP BALDOR AC VECTOR
WHEEL SPEEDS, VARIABLE: 400-2000 PROGRAMMABLE
WORKHEAD HORSEPOWER: 3HP BALDOR AC VECTOR
WORKHEAD SPEEDS, VARIABLE; 0-300 RPM PROGRAMMABLE
WORKHEAD TAPER: JARNO #14
TABLE TRAVERSE: 0-240 IPM PROGRAMMABLE
EQUIPPED WITH:
*HEIDENHAIN SCALE FEED BACK
*3 WORK REST, STANDARD
*BARNES COOLANT FILTRATION
|
|
Ad # 13018 | Cylindrical Grinders (O.D. & I.D.) |
1948 |
Norton |
C-22714 |
Good |
sold |
Photo /
More Info. |
12" Between Centers: Norton O D Grinder
Model # C-22714
12" Between Centers
12" x 1" Grinding Wheel |
|
Ad # 6664 | Cylindrical Grinders (O.D. & I.D.) |
1976 |
JONES & SHIPMAN |
1311 |
Excellent |
sold |
Photo /
More Info. |
10” x 18”cc JONES & SHIPMAN universal cylindrical grinder, Model 1311: 10” x 18”cc JONES & SHIPMAN universal cylindrical grinder, Model 1311
Maximum diameter ground with new wheel 10”
Maximum grinding length between centers 18”
Maximum workpiece weight between centers 220 lbs.
Table traverse per handwheel revolution 5”
Table traverse fine feed graduations 0.50”
Table traverse steplessly variable per minute 0.0005”
Minimum table stroke under hydraulic control 0.040”
Table swivel adjustment-included angle clockwise/
included angle anti-clockwise 19°/20°
Infeed rate at table reversal, reduction in work diameter 0.0002”-0.0012”
Wheelhead feed handwheel-rapid/standard feed 0.250”/0.50”
per revolution, reduction in work diameter
(6) workhead speeds 40-320 RPM
Workhead swivel, clockwise/counter-clockwise 15°/90°
Workhead and tailstock spindle center taper #3 Morse
Standard grinding wheel (Type EIU wheelhead) 14” diameter x 1” wide x 5”
bore
(2) wheelhead speeds 2,000 & 2,680 RPM
Wheelhead swivel adjustment each side or normal
position 180°
Cross traverse of wheelhead 8-1/16”
EQUIPPED WITH:
Manually operated or hydraulically actuated table traverse
Manually operated, automatic intermittent (at table reversal) and automatic continuous (plunge grinding) modes of wheelhead infeed
Rapid wheelhead advance and retraction
Swing-around internal grinding attachment with spindle
¾ H.P. 3/60/220-440 volt motorized workhead with 6” diameter 4-jaw chuck, 6 ¼” diameter magnetic chuck, and combination live/dead center
Tailstock with assorted full and half centers
(1) 5/16”-3” diameter capacity 3-point plain-type steady rest
(1) 5/16”-3” diameter capacity 2-point open-type steady rest
Table mounted diamond holder for dressing wheel
Self-contained hydraulic system with 1 H.P. motor
External coolant pump and tank
Manually operated 1-shot lubrication system
5.5 H.P. 3/60/220-440 volt wheelhead motor and electrical controls |
|
Ad # 11644 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati Milacron |
? |
Very Good |
sold |
Photo /
More Info. |
14" x 36" OD grinder: Cincinnati Milacron Universal Hydraulic
OD/ID
14" x 36"
14" Grinding wheel Max OD
10" Magnetic Chuck face chuck
4 Jaw 10" Chuck (not Shown) |
|
Ad # 5618 | Cylindrical Grinders (O.D. & I.D.) |
94?? |
Bickford/G&L |
FR-200 |
Very Good |
sold |
Photo /
More Info. |
Universal OD/ID Grinder with CAM Grinding Capabilities: Table: 13" x 59"
swing 8" max
Tailstock attachment
Swivel Wheelhead with 8" vertical Movement
Wheelhead has 3 Spindles Mounted on it:
2 OD Wheels-thru type --one on each end
1 ID Spindle
Includes cams for tap grinding:
ID Grinding attach included
a few 5C tap collets
ID spindle is a Precise Grinding spindle , 3" diam. with Precise variable speed drive.
Workhead: Swivels
Workhead Drive: 1/2 hp @ 115V |
|
Ad # 7678 | Cylindrical Grinders (O.D. & I.D.) |
1942 |
CINCINNATI |
ER |
Good |
sold |
Photo /
More Info. |
12´´ X 72´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 12´´ X 72´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
SWING OVER BED ...................... 12-1/2´´
DISTANCE BETWEEN CENTERS ............ 72´´
HYDRAULIC TABLE TRAVEL .............. 3 TO 220 IPM
AUTOMATIC INFEED .................... .002´´ TO .0125´´
WORKHEAD SPEEDS (VARIABLE) .......... 55 TO 500 RPM
GRINDING WHEEL ...................... 14´´ X 1-1/2´´
DROP DOWN ID ATTACHMENT
TABLE MOUNTED DRESSER
5´´ STEADY REST
BACKREST
COOLANT
3 HORSEPOWER WHEELHEAD MOTOR
1-1/2 HORSEPOWER HYDRAULIC MOTOR
1 HORSEPOWER VARIABLE SPEED WORKHEAD MOTOR
3/4 HORSEPOWER ID WHEELHEAD MOTOR |
|
Ad # 9382 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
1R |
Good |
sold |
Photo /
More Info. |
6" X 18" : 6" X 18" LANDIS MODEL 1R, Ltr R PLAIN
CYLINDERICAL GRINDER
Swing Over Table, Nominal 6"
Max grinding diameter 6.875"
Distance beyween centers, Nominal 18"
Grinding wheel diameter, standard 16"
Grinding wheel diameter, Max 3"
Grinding wheel hole diameter 5"
Table swivel taper 4 IPF"
Table swing angle 20 degrees
Table longitudinal feeds, infinite 2 to 240 IPM
Hydraulic Longitudinal Table Feed
Hydraulic Grinding Wheel Infeed
1/4 HP Workhead
Bijur One Shot Lubrication System
Coolant System (Tank & Pump)
|
|
Ad # 5416 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
10" x 72" |
Fair |
Sold |
Photo /
More Info. |
10" x 72" Norton OD GRinder with 14" Dia Wheel: Swing: 10"
Distance Between centers: 72"
Max. Grind Length: 72"
Wheel Diameter: 24"
Coolant and Filtration System
Three Steady Rests
1 x Diamond Dresser |
|
Ad # 7663 | Cylindrical Grinders (O.D. & I.D.) |
1941 |
cincinnati |
1P5D1L-8 |
Good |
Sold |
Photo /
More Info. |
16in x 36in: 16"x36"
3"x30"grinding wheel
20hp |
|
Ad # 6450 | Cylindrical Grinders (O.D. & I.D.) |
1952 |
CINCINNATI |
|
Very Good |
sold |
Photo /
More Info. |
10´´ X 24´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 10" X 24" CINCINNATI UNIVERSAL CYLINDRICAL
GRINDER:
TYPE ................................ KNEE HOLE
SWING OVER BED - MAXIMUM ............ 11´´
MAXIMUM CENTER DISTANCE............ 24´´
HYDRAULIC TABLE TRAVERSE ............ YES
AUTOMATIC INFEED AT TABLE REVERSAL .. YES
VARIABLE SPEED WORKHEAD ............. YES
GRINDING WHEEL SIZE ................. 12´´ DIA. X
1´´ W
INTERNAL GRINDING ATTACHMENT ........ YES
COOLANT ............................. YES
DRESSER MOUNTED ON TAILSTOCK ........ YES
SWIVEL .............................. TABLE -
WORKHEAD - WHEELHEAD
WHEELHEAD MOTOR ..................... 2
HORSEPOWER
I.D. SPINDLE MOTOR .................. 1
HORSEPOWER
WORKHEAD MOTOR ...................... 1/4
HORSEPOWER |
|
Ad # 10173 | Cylindrical Grinders (O.D. & I.D.) |
?? |
Van Norman |
465 |
Very Good |
sold |
Photo /
More Info. |
14"swing x 60" centers-crank shaft grinder: Crank Shaft style grinder
14" x 60" centers
2-8" 3 jaw chucks
rapid traverse
wheel infeed
arnole gage
centering stand
24" dia wheel
wheel balancer included
10 spare wheels included
Also with: centering gage, some spare parts,
will hold 0.0005 tolerance no problem
cuts nice -round circles |
|
Ad # 6799 | Cylindrical Grinders (O.D. & I.D.) |
1960 |
TOS |
7U/630/3000 |
Good |
sold |
No Photo /
More Info. |
: more informations on request |
|
Ad # 885 | Cylindrical Grinders (O.D. & I.D.) |
11/85 |
STUDER |
S40-12 |
Very Good |
sold |
Photo /
More Info. |
CNC UNIVERSAL O.D. GRINDER 10" X 24": UNIVERSAL SWIVEL HEAD; OD only
Two (2) OD Wheels
FILTER SYSTEM;
24" CENTERS;
APPROX 10" SWING; ONLY 7,462 HRS;
COOLANT FILTRATION SYSTEM WITH SKIMMER
REMOTE PENDANT CONTROL
HYDRAULIC
UNIVERSAL TABLE
OD CNC
got over 57K in it!
new boards included!! |
|
Ad # 12475 | Cylindrical Grinders (O.D. & I.D.) |
|
Ribon |
Rur 1000 |
Good |
sold |
Photo /
More Info. |
12" x 36": Ribon Rur 1000
Id / OD Grinder
14" Wheel
12" x 36" Travels
Hydrailic Travels
1750 RPM
Coolent
Made in italy |
|
Ad # 8034 | Cylindrical Grinders (O.D. & I.D.) |
|
Toyoda |
|
Very Good |
Sold |
Photo /
More Info. |
Toyoda OD Grinder: universal in great condition includes all attachments, and a large box of ... |
|
Ad # 10172 | Cylindrical Grinders (O.D. & I.D.) |
60's |
Landis |
|
Very Good |
Sold |
Photo /
More Info. |
16 X 96: 16" swing x 96"
This machine is in excellent running condition.
Wheel : 24"
Swing: 16"
Distance between the centers: 96"
Approx Weight: 33,000 lbs |
|
Ad # 4854 | Cylindrical Grinders (O.D. & I.D.) |
1996 |
Okuma |
GA25T |
Excellent |
Sold |
Photo /
More Info. |
Okuma GA-25T CNC Cylindrical OD Angle Head Grinder : Capacity:
Swing over table: 12.99"
Max grinding dia.: 7.87"
Max workpiece length: 13.78"
Wheel Spindle:
Wheel size: 20"
Speed ranges: infinitely variable
Wheelhead (X-axis):
Travel range: 12.6"
Auto infeed rate: .000047 to 236 ipm
Positioning rate: 630 ipm
Saddle (Z-axis):
Travel range: 25.59"
Auto infeed rate: .000024 to 236 ipm
Positioning rate: 630 ipm
Workhead:
Bore taper: MT-4
Work spindle speed: Max. 800 rpm
Speed ranges: infinitely variable
Footstock:
Bore taper: MT-4
Auto travel: 1.97"
Manual taper offset: .0031"
Motor:
Wheel spindle drive: 10 HP
Work spindle drive (C-axis): 3 HP
Hours:
Power on time:19,390 hrs
NC run time:4,981 hrs
Spindle run time:4,378 hrs
Grind time:3,091 hrs
Dressing time:281 hrs
|
|
Ad # 12654 | Cylindrical Grinders (O.D. & I.D.) |
2011 |
Supertec |
G32P-60CNC |
Excellent |
sold |
Photo /
More Info. |
24": This Supertec Grinder G32P-60CNC
Was installed in Summer of 2011.
It was never put into production (increased order never came from customer); only has approx. 20 Test hours.
includes tailstock
no id spindle
Machine has Full enclosure and splash guard w/ oil mist separator,
Fanuc OiT-D Control,
(2) OGC3-1003 5" wheel flanges,
coolant system w/paper filter and magnetic separator (60L/min,140L)
between centers 24"
Max load held 330lbs
230V/60/3
sells new for 135K |
|
Ad # 13425 | Cylindrical Grinders (O.D. & I.D.) |
2010 |
Okamoto |
OGM8-20UB |
Excellent |
sold |
Photo /
More Info. |
CNC: OD 8.5" swing x 20" centers: Okomato CNC OD grinder
#OGM 8-20-UB
Control: Fanuc Oi-TB--ogmex software
swing over bed 8.5" dia
center dist: 20"
universal table
max turn dia: 7.87In
max weight between centers:44
travel X: 8.46"
swing angle: =- 30 deg
least travel increment(wheel head):0.00001 in
tapers=spindle-tailstock 3MT
spindle thru hole: 0.68 dia
spindle rpm: 15-500
motors: fanuc ac servo
auto lube
coolant/paper filter unit
required power 15kva
wheel dia 12" w/ 5" hole x 1 wide
all manuals
paper filter system
very nice machine -low usage
over 100k new |
|
Ad # 14790 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati |
8 x 12 x 36 |
Good |
sold sold |
Photo /
More Info. |
12"dia x 36"length: Concinnati 8 x 12 x 36 OD grinder
OD only
max swing 13"
main motor: 5HP
center distance:36" max
vari speed on work head
universal table
16" dia wheel x 1" on machine
coolant
Note: machine was completly refurbished &
upgraded
then never run,looks great!
rigging/loading fee $1000.00 |
|
Ad # 9144 | Cylindrical Grinders (O.D. & I.D.) |
87 reman |
Heald |
OG/271 toolroom |
Good |
sold |
Photo /
More Info. |
ID grinder 20 x 20": 20 x 20 capacity
12" 4 jaw chuck
Univ swivel head
speed adj
10 HP0G6606 GRINDERS, INTERNAL
MODEL #271 HEALD INTERNAL GRINDER
EQUIPPED WITH:
Power Draw Bar Wheel Guard Cover For Head
Hydraulic Tank Power Feed On End Table
Feed Box Spindle Motor
Speed Vari=Drive Motor on Work Spindle Coolant Tank
Cash Head Conjugate Sine Bar
CATALOG SPECIFICATIONS: std specs verify
Swing Over Table (Straight Work), Diameter .... 18"
Swing Inside Standard Chuck Guard, Diameter ... 12"
Hole Length Ground, Maximum ................... 5"
Hole Diameter Ground .......................... 1/8" - 5-1/2"
Included Angle Taper, Maximum ................. 60 degree
Grinding Speed ................................ 0 - 20 FPM
Rapid Traverse ................................ 35 FPM
Workhead Speeds ............................... 400, 266, 200, 133 RPM
Floor Space W/Coolant Tank .................... 93" x 85"
Net Weight, Approximate ....................... 7400 lbs.
|
|
Ad # 7683 | Cylindrical Grinders (O.D. & I.D.) |
|
LANDIS |
3RH |
Very Good |
Sold |
Photo /
More Info. |
24´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER : 24´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER
NOMINAL GRINDING CAPACITY ........ 24´´ X 96´´
ACTUAL SWING OVER TABLE .......... 25-1/2´´
GRINDING WHEEL SIZE .............. 14´´ X 1-1/2´´ X 5´´
GRINDING WHEEL SPEEDS ............ (2) 1720 & 2185 RPM
INTERNAL SPINDLE SPEED ........... 15000 RPM
TABLE TRAVERSE SPEED (VARIABLE) .. 2 TO 240 IPM
WORKHEAD SPEEDS (VARIABLE) ....... 12 TO 360 RPM
WORKHEAD / WHEELHEAD / TABLE ..... SWIVEL
WORKHEAD SPINDLE ................. LIVE OR DEAD
INFEED ........................... AUTOMATIC
CHUCK ............................ 18´´ 4-JAW
I.D. SPINDLE ..................... BOLT-ON TYPE
LUBE SYSTEM ...................... BIJUR
COOLANT .......................... YES
WORKHEAD MOTOR ................... 1 HORSEPOWER
HYDRAULIC MOTOR .................. 2 HORSEPOWER
WHEELHEAD/I.D SPINDLE MOTOR ...... 10 HORSEPOWER |
|
Ad # 14895 | Cylindrical Grinders (O.D. & I.D.) |
1953 |
Brown & Sharp |
# 2 |
Good |
sold |
Photo /
More Info. |
ID/OD grinder: 14" swing x 30" centers: Brown & Sharp Universal ID/OD grinder # 2 S/N#521-2-11
ID/OD grinder: 15" max swing x 30" centers
swivel table and head-universal
grinding wheel: 16" dia
Std specs below-please verify actual machine
14" X 30" BROWN & SHARPE UNIVERSAL
I.D./O.D. CYLINDRICAL GRINDER
MODEL:#2 S/N: 521-2-11 NEW: 1953
NOMINAL SWING ................... 14"
DISTANCE BETWEEN CENTERS, NOMINAL ... 30"
DISTANCE BETWEEN CENTERS, MAX ... 33-3/4"
WHEELHEAD MOTOR ........... 3 HP
WHEELHEAD SPINDLE SPEEDS (3) .... 2100, 2400 & 2800 RPM
WHEEL SIZE .......... 14" X 1-1/2" X 5"
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG.
WHEEL SPINDLE SWIVELS ...........90 DEG.
HEADSTOCK MOTOR ............. 1/2 HP
HEADSTOCK SWIVELS ........... 180 DEG.
INFINITELY VARIABLE SPINDLE SPEEDS ..... 25 TO 500 RPM
SPINDLE NOSE ............... A2-6"
INFINITELY VARIABLE TABLE SPEED ........ 3" TO 150" IPM
TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1" SLOW
0.1" FAST
DWELL @ TABLE REVERSAL .. 0 TO 2-1/2" SECONDS
SWIVEL TABLE - TAPER PER FOOT .... 5" BACK
1-1/2" FORWARD
- SCALES FOR ANGULAR SETTING 12 DEG. BACK
3 DEG. FORWARD
AUTOMATIC CROSS FEED, INF. VARIABLE 0.0001" - .003"
POSITIVE STOP SETTING ...... 0.00002"
APPROXIMATE MACHINE WEIGHT ...... 8,300 LBS
DIMENSIONS ..... 112"W X 62"L X 61"H
EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT-off machine now but have it
HYDRAULIC OPERATOR FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-AUTOMATIC PLUNGE INFEED
RIGHT OR LEFT END WHEEL MOUNTING
DOUBLE SWIVEL WHEELHEAD - SWIVELLING @ WHEEL
SPINDLE HEAD OR @ THE WHEEL SLIDE PERMITS ANY
COMPOUND SETTING REQUIRED IN COMBINATION
STRAIGHT AND TAPER GRINDING
DUAL DEAD/LIVE HEADSTOCK SPINDLE
PULL-OUT HYDRAULIC SYSTEM
COOLANT SYSTEM
CHUCK IS MOUNTED ON WORKHEAD SPINDLE
WORK LIGHT
PRESENTLY WIRED FOR 3/60/220 VOLTS
Note: very nice running grinder! |
|
Ad # 10336 | Cylindrical Grinders (O.D. & I.D.) |
1986(?) |
Berco |
RTM351/3000 |
Excellent |
Sold |
Photo /
More Info. |
116 inches length: Specifications Standard Equipment
Max. Dist. Btwn. Chucks: 116.500" / 2960mm
Max. Dist. Btwn. Centers: 118.109" / 3000mm
Max. Swing Over Table: 27.500" / 700mm
Stroke Capacity: 13.375" / 340mm
Grinding Wheel Diameter: 36.000" / 915mm
Machine Weight: 16534 lbs. / 7500 kg
Includes:
Setup Fixture w/Indicator
Wheel Dresser
3 Steady Rests
4 Wheel Hubs & Balancing Arbor
1 Radius Dresser
1 Arnold Grinding Gauge with 3" to 5" foot
and 5" to 8" foot
Miscellaneous Service Tools
|
|
Ad # 5386 | Cylindrical Grinders (O.D. & I.D.) |
|
Bertoni &Cotti |
TM 260 |
Very Good |
Sold |
Photo /
More Info. |
BERTONI & Cotti Crankshft Grinder, Model TM260: Includes Leeson Speedmaster, slide feed rate motor controller. |
|
Ad # 11656 | Cylindrical Grinders (O.D. & I.D.) |
1960s |
Norton |
CV4 |
Very Good |
sold |
Photo /
More Info. |
10" x 36" Angle Head Grinder: Norton CV4
10" x 36"
24" Diameter Grinding wheel
Coolent
|
|
Ad # 10627 | Cylindrical Grinders (O.D. & I.D.) |
1970 |
Brown & Sharpe |
1020U |
Very Good |
Sold |
Photo /
More Info. |
10 x 20: Brown & Sharpe ID/OD Grinder
Model: 1020U
Serial: 521-1020-226
Built in: 1970s
Comes with transformer
Wired for 460 volts, 3 phase, 60 cycle
Control voltage 115 volts
Full load amperes 5
Ampere rating largest motor 3.1 amperes
Very good condition. Everything works: extra hubs, wheels, and steady rests included.
Std specs below-please verify!
Universal O.D. / ID. grinder W/ drop Down I.D spindle
7.5" Dia. 4 jaw chuck
12" dia, wheel
11" swing x 20" centers
Headstock Speeds 60-600 RPM
Table speeds 10-70 IPM
2 HP main motor
Web-Specs
Grinding Capacity: 10" x 20"
Grinding Wheel Size: 10" Dia. x 1/2" Wide
Grinding Wheel Speeds: 2,500, 3,000 & 3,600 RPM
Table Longitudinal Feed Rates, Variable: 3 - 150 IPM
Table Travel Per Rev. of Handwheel, Slow: .1"
Table Travel Per Rev. of Handwheel, Fast: 2.5"
Table Dwells: 0 - 2-1/2 Seconds
Swivel Table Angular Adjustment: 8 Degrees
Table Cross Feed Rates: .0001" - .003"
Work Head Speeds, Variable: 60 - 600 RPM
Machine Weight, Approx.: 5,700 Lbs.
Combination Live/Dead Headstock
Equipped With:
Swing Down Internal Grinding Attachment
Coolant Pump & Tank
|
|
Ad # 12925 | Cylindrical Grinders (O.D. & I.D.) |
2000 |
weldon |
1632 |
Excellent |
sold |
Photo /
More Info. |
16 x 32: Weldon 16 X 32 cnc id/od grinder
Fanuc 15-ot control |
|
Ad # 7151 | Cylindrical Grinders (O.D. & I.D.) |
1957 ? |
Heald |
271 Tool Room |
Excellent |
sold |
Photo /
More Info. |
Heald 271 ID Grinder with Extra ID Spindles : Swing: 22"
Grinding Capacity: 12" x 5"
not universal or tilting head type
chuck has a fine adjust base screw for a taper adjustment
auto feeds both directions w/miltiple stops
chuck:12" 4 jaw
coolant external tank 10 gallon
spindle bore: 3" thru hole in chuck, machine has 2" dia bore-approx 15" deep down to 1" bore out back end
Includes: Two (2) Red Head ID spindles (one is a 14,000 rpm)
Price includes:
All Documents, Spares Package of misc. parts, drive belts and numerous ID grinding wheels
NOTE: Bought from Government Surplus - hardly used at all! |
|
Ad # 11486 | Cylindrical Grinders (O.D. & I.D.) |
1941 |
Norton |
15 x 72 |
Fair |
sold |
Photo /
More Info. |
OD grinder 15" swing x 72"centers: Norton OD grinder 15" swing x 72"centers
DC vari drive upgraded to work head
15" swing over bed
72" centers
15HP
12"Dia x 2"wide wheel
rigging fee to load:$1200.00 |
|
Ad # 7680 | Cylindrical Grinders (O.D. & I.D.) |
1977 |
WARNER & SWASEY |
1U-4 |
Very Good |
SOLD |
Photo /
More Info. |
14´´ X 36´´ WARNER & SWASEY UNIVERSAL CYLINDRICAL GRINDER: 14´´ X 36´´ WARNER & SWASEY UNIVERSAL CYLINDRICAL GRINDER
SWING OVER WAYS .................... 14´´
DISTANCE BETWEEN CENTERS ........... 36´´
LONGITUDINAL TABLE TRAVEL .......... 42´´
DIAMETER OF GRINDING WHEEL.......... 14´´
COMBINATION HEAD STOCK
TAPER CONTROL
DROP DOWN INTERNAL GRINDING ATTACHMENT
POWER WORK HEAD
TOOLROOM PRODUCTION DESIGN
1 HORSEPOWER ID MOTOR
5 HORSEPOWER MAIN MOTOR |
|
Ad # 5179 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
767/1 R-Universal |
Good |
sold |
Photo /
More Info. |
14" x 30" Landis OD Grinder: Landis 767/1 R-Universal grinder
Swing: 14"
Distance Between Centers: 30"
Wheel Diam. 14"
NOTE: ID attachment on machine without ID spindle |
|
Ad # 11916 | Cylindrical Grinders (O.D. & I.D.) |
1998 |
SMTW |
MBA 1332H |
Excellent |
sold |
Photo /
More Info. |
14.5" OD x 59" Between centers: SMTW MBA 1332H Cylindrical grinder
14.5" OD x 59" Between centers
Traverse speed, 2" to 160" IPM
Wheel, 3" wide x 24" dia. with 12" hole
Wheel speed, 1,130 rpm
Auto plunge and infeed
Min. autoinfeed increment feed, .0002"
Workhead spindle speed, 32 to 312 rpm
15 hp. grinding spindle
Sony readout
paid 60K new in 1998 |
|
Ad # 15743 | Cylindrical Grinders (O.D. & I.D.) |
1964 |
landis |
2R plain OD |
Good |
sold |
Photo /
More Info. |
2R 6 x 30 capacity: 1964 landis #2R OD plain cylindrical grinder
6 by 30 inch working capacity
new 1964 built in usa at landis tool company
facility waynesboro pennsylvania
located in
binghamton, new york |
|
Ad # 864 | Cylindrical Grinders (O.D. & I.D.) |
70's |
Cincinatti |
3P2D1L-106 |
Good |
Sold |
Photo /
More Info. |
O.D. Grinder 10 x 36": variable speed, coolant; under power |
|
Ad # 6149 | Cylindrical Grinders (O.D. & I.D.) |
1970 |
CINCINNATI-HEALD |
273A |
Good |
Sold |
Photo /
More Info. |
# 273A CINCINNATI-HEALD Universal Internal Grinder: Max. swing over table extension w/o guard 24 ½”
Max. swing inside guard 28”
Swing, work-head swiveled 90° 12”
Angular adjustment of work-head 90°
Work-head cross-slide travel 1 ½”
Distance work-head flange to edge of wheel slide 0-29 1/16”
Table speeds for grinding 0-18 FPM
Variable work-head speeds 50-500 RPM
Rapid traverse table 18 FPM
One turn of cross feed hand-wheel .050” on dia.
Cross feed in increments, at one or both ends of
table stroke .0001”-.0005” on dia.
Minimum stroke .125”
One turn of work-slide hand-wheel .100”
One turn of table hand-wheel 3 ¾”
EQUIPPED WITH:
Hydraulic unit
Coolant tank w/ pump
12,000 RPM Heald Red Head Spindle
Auto. Lub. System
TRAK 101 1-axis D.R.O.
12” Dia. 3-jaw universal chuck
Work light
Chuck guard
1 ½ H.P. work-head drive motor
5 H.P. wheel-head drive motor |
|
Ad # 2748 | Cylindrical Grinders (O.D. & I.D.) |
1979 |
Okamoto |
IGM-1E |
Good |
sold |
Photo /
More Info. |
Okamoto ID Grinder: 20" X travel
14" swing diameter
Universal head
6 jaw chuck
Hydraulic
Spark out
|
|
Ad # 11657 | Cylindrical Grinders (O.D. & I.D.) |
1960s |
cinncinati |
14" x 72" |
Very Good |
sold |
Photo /
More Info. |
14" x 72" Angle Head Grinder: Cinncinati 30 Degree Angle Head Grinder
30" Diameter Wheel
14" Swing over Table
72" Between Centers
Semi-automatic
|
|
Ad # 15999 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
Type "C" (OD Plain Grinder) |
Needs Work |
sold |
Photo /
More Info. |
16" x 30": NOTE:
THIS IS A PARTS MACHINE. The wheel infeed
mechanism is not working and would require very
expensive work to repair. The rest of the
machine is in good condition
Wheel: 32" diameter x 2" wide
Face Plate: 15" diam.
DBC: 30"
Comes with a number of wheels (various)
|
|
Ad # 5196 | Cylindrical Grinders (O.D. & I.D.) |
|
Myford |
|
Good |
Sold |
Photo /
More Info. |
5"x12" MYFORD PLAIN CYLINDRICAL GRINDER: 5'X12" TABLE
Spindle speed 1,830-1,988rpm
Power in/outfeed
Coolant reservoir |
|
Ad # 5185 | Cylindrical Grinders (O.D. & I.D.) |
1977 |
Studer |
RHU-400/125-C |
Very Good |
sold |
Photo /
More Info. |
Studer 5" x 16" Hydraulic Universal OD Grinder: OD grinder
Max Swing: 5" (125mm)
Distance Between Centers: 16" (400mm)
Travel in X: 17.5" (440 mm)
Grinding Wheel (left side) Specifications:
Diameter 16"
Max Width: 2"
Bore: 127 mm
Power: 4 hp
Workhead Swivel: 90 deg
Work Table Swivel: 15 deg(?)
Wheelhead Swivel: 45 deg
Workhead Spindle Nose: MT 5
Workhead Speed Range: 30 - 675 rpm
Table Speeds: 0.05 - 5.5 meters/min (2-220 ipm)
Dresser Holder mounted onto Tailstock(footstock)
Taper Micro Correction on Tailstock(footstock)
Full Coolant and Filtration System
in operation when taken out of service-will hold
0.000050 millionths tolerance |
|
Ad # 2456 | Cylindrical Grinders (O.D. & I.D.) |
1970 |
CINCINNATI |
LR, 1970 |
Needs Work |
SOLD |
Photo /
More Info. |
14” X 168” CINCINNATI SEMI AUTOMATIC ROLL GRINDER : Max. Swing over Table: 15 1/2"
Max. Weight of Rolls on Centers: 6500 lbs.
Max. Weight of Rolls on Journal Rests: 6500 lbs.
Max. Camber on diameter: 040" std.
Nominal Distance Between Centers: 168"
WHEELHEAD
Max. Crossfeed: 11"
Grinding Wheel, std.: 24" x 2" x 12"
Grinding Wheel Spindle Speeds,variable: 500-1200rpm
Spindle Bearings, Filmatic: 5 shoe
HEADSTOCK
Work Speeds, Variable: 38-136 rpm
Taper in workhead: 13 B&S
FOOTSTOCK
Taper in footstock spindle: 13 B&S
TABLE
Table Traverse, variable: 3 - 120 IPM
Hand Table Traverse: 1/8" per rev.
Table Type: One Piece
CROSS TRAVERSE & SIZING
Wheelhead movement per rev. of handwheel: 1/16"
Min. infeed increment on dia.: 0001"
Auto. pickfeed at table reversal Max: 0012"
Minimum: 0002"
Power Cross Traverse Rate: 16 IPM
|
|
Ad # 7147 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
8 x 16, 28in Wheel |
Good |
Sold |
Photo /
More Info. |
Norton Tool Room OD Grinding Machine with 18" Wheel : Capacity:
Swing: 8"
DBC: 16" |
|
Ad # 7279 | Cylindrical Grinders (O.D. & I.D.) |
1973 |
KARSTENS |
A |
Excellent |
Sold |
Photo /
More Info. |
12"x 16"cc Model A KARSTENS Hydraulic Universal Grinder: 12"x 16"cc Model A KARSTENS Hydraulic Universal Grinder
Maximum swing: 11.81"
Maximum work between centers: 15.75"
Maximum wheel diameter: 15.75" x 5" diameter hole
Maximum width of wheel: 3.837"
Infinitely variable work head speeds: 30 to 450 RPM
Swivel table graduated to a maximum angle: 11 1/2 º
Maximum work piece weight between centers: 220 Lbs.
Maximum work piece weight chucking: 110 Lbs.
Infinitely variable infeed range: .00004" - .001"
Hydraulic table traverse infinitely variable: up to 236 IPM
Minimum table stroke: 1/32"
Spindle speeds: 1600/2000 RPM
Work head taper hole in spindle: No. 5 M.T.
Spindle bore: 1 ?"
Tail stock taper hole: No. 4 M.T.
Plunge grinding speed: .002 to .157 IPM
Total infeed travel of hand wheel: 3 5/32"
Swivel of work head: 90º
EQUIPPED WITH: Hydraulic operation
Swivel work head
Swivel wheel head
Swivel table
Variable work head speeds
Plunge feed
Pick feed
Fine and compensating feed control
(2) Wheel mounts
(1) New grinding wheel
.44/.89 H.P. Variable speed work head drive
5.4 H.P., 1420 RPM wheel drive motor |
|
Ad # 1294 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
6 x 18 |
Fair |
sold |
Photo /
More Info. |
Norton OD Grinder (6" dia. x 18" BDC): Max grinding dia 6"
Max grinding length 18"
Wheel 20" dia, 2" wide
Spindle Motor 7.5 HP |
|
Ad # 13355 | Cylindrical Grinders (O.D. & I.D.) |
1971 |
Danobat |
RE H 500 |
Good |
sold |
Photo /
More Info. |
OD/ID-6" x 18": Danobat ID / OD Grinder
Model RE H 500
auto hyd.Left & Right feed, manual in/out feed
Travels 6" x 18"
New Allen Bradley Control-vari speed inverter
Max wheel Size 12" on a 3" arbor
3 Jaw 6" Chuck
220/3 Volts
new coolant tank & pump
ID spindle needs a new bearings, OD spindle-ok
hyd cylinders rebuilt recently-table feed
new electrical push buttons installed recently |
|
Ad # 11185 | Cylindrical Grinders (O.D. & I.D.) |
rebuilt |
Armstrong |
B1-232 |
Excellent |
sold |
Photo /
More Info. |
Cott -Rubber roll grinder 8" dia x 21"L: Cott Grinder
Used to gring rubber rolls
Completly rebuilt-looks new
8" Plus roll Dia
21" centers
dust collector chute
very nice machine!! |
|
Ad # 7658 | Cylindrical Grinders (O.D. & I.D.) |
|
RIBON |
RUR-1000 |
Good |
sold |
Photo /
More Info. |
11´´ X 40´´ RIBON UNIVERSAL CYLINDRICAL GRINDER: 11´´ X 40´´ RIBON UNIVERSAL CYLINDRICAL GRINDER
MAXIMUM SWING OVER TABLE ............. 11´´
DISTANCE BETWEEN CENTER .............. 40´´
LONGITUDINAL TABLE FEEDS HYDRAULIC ... 1 TO
19
FPM
GRADUATED TABLE SWIVELS .............. +/- 5
DEGREES
AUTOMATIC INFEED AT TABLE REVERSE .... YES
HEAD STOCK SWIVELS ................... 360
DEGREES
POWER WORKHEAD SPEEDS ................
95,155,225,410 RPM
GRINDING WHEEL ....................... 14´´ X
1´´
X 5´´
GRINDING WHEEL SPEEDS ................
1700/2100
RPM
DROP DOWN ID ATTACHMENT .............. YES
GRINDING WHEEL MOTOR ................. 3
HORSEPOWER
HYDRAULIC MOTOR ...................... 1-1/2
HORSEPOWER
DROP DOWN ID MOTOR ................... 1
HORSEPOWER |
|
Ad # 13135 | Cylindrical Grinders (O.D. & I.D.) |
1981 |
KELLENBERGER |
1000U |
Excellent |
sold |
Photo /
More Info. |
EXCELLENT ID/OD KELLENBERGER 39 3/8 BETWEEN CENTERS: Kellenberger 1000U OD/ID GRINDER,
18" Swing 40" Centers
Specifications:
Distance between centers 39-3/8"
Distance between centers w/ tailstock overhanging47.25"
Height of centers5"
Swing10"
Table longitudinal travel51-13/16"
Longitudinal travel per turn of handwheel25/32"
Table speed (hydraulic_.6-240 ipm
Table swivel9 degrees
Reversing dwell0-5 seconds
Grinding wheel infeed, 1 grad of feed scale.0002"
Grinding wheel infeed, auto feed max.036"
Grinding wheel infeed, infeed for plunge grind.00004" to .002"
Grinding wheel infeed, micrometer stop, 1 grad.00005"
Transverse movement of wheel slide11.25"
Hydraulic rapid wheel slide advance/retract stroke1-37/64"
Grinding wheel speeds (4)1500/1700/2200/3600 rpm
Grinding wheel for cylindrical grinding16" x 2" x 5"
Grinding wheel (surface grinding(10" x 3/4" x 3"
Swivel of grinding head270 degrees
Vertical motion of grinding spindle head4-59/64" to 13-35/32"
Workhead variable speeds10-400 rpm
Workhead swivels360 degrees
Workhead spindle taperMT5
Appx floor space required106" x 64" x 66"H
Machine weight (appx)6,500 lbs
Equipped With:
ID spindle included
COOLANT SYSTEM
4 HP WHEEL HEAD MOTOR
MARPOSS IN-PROCESS GAUGING SYSTEM
MT.5 TAPER MOUNT FACEPLATE
1) STANDARD TAIL MOUNTED DIAMOND WHEEL DRESSER
1) SWIVELLING DERSSER WITH MICROMETER ADJUSTMENT FOR EXTERNAL AND INTERNAL GRINDING
1) RADIUS DRESSER, TABLE MOUNTED, FOR CONVEX AND CONCAVE RADII
1) WHEEL HUB FOR 16" WHEELS
1) WHEEL HUB FOR 10" FACE GRINDING WHEELS
1) SWING AROUND ID ATTACHMENT, FACTORY MOUNTED ID BLOCK
1) ID SPINDLE, 12,500 RPM
HYDRAULIC TAILSTOCK
(2) SUPPORT REST
VARIABLE SPEED WORKHEAD
SWING AROUND I.D.,
FULL AUTO CYCLE, with ACCESSORIES:chuck, steady rest
EXCELLENT ID/OD
KELLENBERGER 39 3/8 BETWEEN CENTERS
was rebuilt by Rohner machine in CA |
|
Ad # 462 | Cylindrical Grinders (O.D. & I.D.) |
1965 |
Okuma |
GPB |
Good |
Sold |
Photo /
More Info. |
O.D Grinder 41" x 11" Cap.: Traverse & plunge Grinder |
|
Ad # 7267 | Cylindrical Grinders (O.D. & I.D.) |
1985 |
TAISEI |
GRI-2000S |
Excellent |
Sold |
Photo /
More Info. |
Model GRI-2000S TAISEI Internal Grinder: Model GRI-2000S TAISEI Internal Grinder
Diameter of hole to be ground 1.97” to 27.6”
Max. length of hole ground 39.4”
Max. length of work 78.7”
Max. swing inside chuck guard 33.5”
Height from table top to centerline of work over table 19.7”
Max. swing over table 39.4”
Max. stroke of table 78.7”
(6) Table grinding feeds 5.12-35.43 IPM
(6) Table rapid traverse rates 10.24-70.87 IPM
Table travel per revolution of handwheel 0.9”
Workhead spindle taper No. 5 M.T.
Workhead swivel adjustment up to 15 degrees ±
Workhead transverse adjustment:
Forward from center 3.9”
Backward from center 19.8”
Workhead transverse adjustment per
revolution of handwheel 0.24”
Infinitely variable work head speeds 10-150 RPM
Manual wheel infeed (cross feed) 0.04”
Manual wheel infeed (crossfeed) per
revolution of handwheel 0.0001”
Automatic hydraulic wheel infeed (crossfeed) per
table stroke on work radius 0.0001” to 0.0012”
Hydraulic cross & reverse arrangement of wheelhead 8”
Grinding heads spindle speed ranges 4670 to 7000 RPM
EQUIPPED WITH:
(6) Grinding spindles
(2) 4.72” Dia. x 42” reach
(1) 4.72” Dia. x 24” reach
(1) 4” Dia. x 32” reach
(1) 2 ¾” Dia. x 12” reach
(1) 1” Dia. x 12” reach
Inch calibrated wheel infeed index dial graduated to read 0.0002” per
division on work diameters
Infinitely variable workhead speeds
Automatic hydraulic wheel infeed
Hydraulic cross-traverse arrangement of wheelhead (8”)
Common mounting base for work rest and wheel dresser
Angular wheel dresser
32” Dia. faceplate with dual center
28” Dia. 4-jaw chuck
3 point roller steady rest w/ riser
Automatic cycle controls
Rapid traverse table
Chuck guard
Wheel balancing stand with mandrel
(11) Wheel mounts with grinding wheels
25” x 42” x 10 3/8” High T-Slotted auxiliary work support table
Exterior coolant system with splash guards
Automatic lubrication
2 H.P. Table feed motor
5 H.P. Workhead drive motor with ring-cone type speed variation and
work spindle controller
5 H.P. Wheel spindle drive motor
Main and auxiliary control panels |
|
Ad # 7653 | Cylindrical Grinders (O.D. & I.D.) |
1967 |
CINCINNATI |
10R X 72 |
Good |
sold |
Photo /
More Info. |
10´´ X 72´´ CINCINNATI PLAIN CYLINDRICAL GRINDER: 10´´ X 72´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
NOMINAL SWING OVER TABLE .............. 10´´
MAXIMUM SWING SWING OVER TABLE ........ 10-15/16
´´
DISTANCE BETWEEN CENTERS .............. 72´´
STANDARD GRINDING WHEEL ............... 30´´ X 3
´´ X 12´´
GRINDING WHEEL SPEED .................. 830 RPM
WORKHEAD SPEEDS .......................
50/75/113/170 RPM
TABLE TRAVERSE RATES .................. 3 TO 220
IPM
FLOOR TO WORK CENTER .................. 39-1/2´´
BEHIND THE WHEEL PROFILE TRUING ....... YES
AUTOMATIC GAP ELIMINATOR .............. YES
ACRASIZE GAGING ....................... YES
DUAL FEED RATE CONTROL ................ YES
SPARKOUT TIMER ........................ YES
WORKHEAD MOTOR ........................ 1-1/2
HORSEPOWER
GRINDING WHEEL MOTOR .................. 15
HORSEPOWER
elect control
currently not under power but have seen run run.. |
|
Ad # 14268 | Cylindrical Grinders (O.D. & I.D.) |
1965 |
Cincinnati |
DE |
Good |
sold |
Photo /
More Info. |
OD only :grinder 18" x 48": Cincinnati Model DE :OD only Grinder
Rebuilt 1986 original machine
1965
18" x 48" Travel
14" x 2" wide Wheel
Indexing Grinder Head
Power Cross Feed
|
|
Ad # 1257 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
Type E |
Fair |
Sold |
Photo /
More Info. |
OD Grinder 14" x 35 Universal head: 14" x 35" Capacity
Universal Head
US Variable speed drive |
|
Ad # 3733 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
CH 12x36 |
Fair |
Sold |
Photo /
More Info. |
UNIVERSAL ID/OD GRINDER: |
|
Ad # 10331 | Cylindrical Grinders (O.D. & I.D.) |
|
Norton |
10 x 24 universal |
Good |
sold |
Photo /
More Info. |
10 x 24 ID and OD-universal: 10 x 24"
universal table
6" chuck 3 jaw
collet system-5C
face plate |
|
Ad # 10465 | Cylindrical Grinders (O.D. & I.D.) |
|
Heald |
273A |
Good |
Sold |
Photo /
More Info. |
Heald Model Internal Grinder : HEALD INTERNAL GRINDER
Model: 273A S/N 62549
Maximum Swing Inside Table 24.5"
Swing Inside Standard Chuck Guard 20"
Swing W/ Workhead at 90 Degree 13"
Bore Length Ground, Maximum 16"
Grinding Stroke, Minimum .125"
Grinding Stroke, Maximum 16"
Table Longitudinal Travel 20"
Wheelhead Cross-Slide Travel 1.5"
Workhead Positioning Slide Travel 17.5"
Workhead Swivel Angle, Maximum 90 Degree
Grinding Spindle Speeds, Range 0-500 RPM
Grinding Table Speeds, Infinite Variable 0-18 FPM
Power Rapid Table Traverse 18 FPM
5 HP 3500 RPM Grinding Spindle Motor
1.5 HP 3600 RPM Workhead Chuck Motor
0.5 HP Hydraulic Motor
|
|
Ad # 5110 | Cylindrical Grinders (O.D. & I.D.) |
1991 |
Strausak |
57-U/CNC |
Needs Work |
sold |
Photo /
More Info. |
Swiss Built CNC Universal (ID/OD) Precision Grinder: Swiss Built CNC Universal (ID/OD) Precision
Grinder
Almost no hrs on machine...like new
Travels:
X: 680 mm (26.8")
Y: 260 mm (10.25")
Detailed specs:
Main power input: 460/3 load 15KW fused at 25A
air supply: 6 bar pressure, consumption 2m3/h
X-Axis:travel: 260MM, smallest travel increment
0.001mm, max travel speed: 6000 mm/min, feed motor
torque 2Nm
spindle pitch 5mm
Y-Axis :travel 260mm, smallest travel increment
0.001mm, speed max 6000nm/min, torque 2Nm,
turret head-below
External grinding unit: wheel dia 250mm
torque 12.7Nm
motor 4kw,3000rpm,transmission 1:1 spindle speed
range 2000-6000
Internal grinding unit:wheel dia 10-32mm,speed
range 9000-45,000rpm,torque 0.75Nm, power 3.5KW/
8.2A
workhead: MK5 taper, transmission 10:1, speed
range 0-350 RPM, torque 40Nm
tailstock: stepless 0-600N,lateral adj +- 0.08
nm
travel betwween centers max50mm-min/29mm Min
Dual OD Grinding Wheels:
Wheel Diameter: 250 mm (10")
Motor Power: 4kW (5.5 hp)
Spindle Speed: 2,000 - 6,000 rpm
ID Spindle speed: 45,000 RPM
Wheel base manually swivels between ID/OD
spindles with degree scale on base-w axis
uses chuck or collet system
Control: IBH micro modus 2 S/N# 90.7865
Internal Grinding Spindle: (Turret Mounted)
Type: MFN 1045
I.D. Spindle Speed: 9,000 - 45,000 rpm
Motor Power: 3.5 kW (4.5 hp)
Workhead:
Mounting Taper: MK 5
Speed Range: 0 - 350 rpm (programmable)
Torque at Spindle: 40 Nm
Control: ZBH Micro-Modus 2# H6.0.00V2A0S
Has canned cylces in control
Also includes:
Continuous Path "U" Axis- manual rotate of base with Remote jog Pendent
Have All Manuals/electrical-operation in english and german language
Control # ABNR-9004.124.084 S/N # 90.7685
Note:Iron is like new ,little used..Machine has control issue but comes up with alarm-we think it could be very minor, paramaters,door interlocks,ect..not major?
priced to sell !!
might want to update with new control? |
|
Ad # 7662 | Cylindrical Grinders (O.D. & I.D.) |
|
CINCINNATI |
|
Good |
Sold |
Photo /
More Info. |
12´´ X 48´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 12´´ X 48´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
MAXIMUM WORK SWING ............... 12-15/16´´
DISTANCE BETWEEN CENTERS ......... 48´´
GRINDING WHEEL SIZE .............. 14´´ X 1´´ X 5´´
TABLE TRAVERSE SPEEDS (VARIABLE) . 3 TO 240 IPM
HEADSTOCK SPEEDS (VARIABLE) ...... 55 TO 500 RPM
DROP DOWN I.D. SPINDLE
PICK FEED
COOLANT
SWIVEL WHEELHEAD / WORKHEAD / TABLE
HYDRAULIC TABLE TRAVERSE
1 HORSEPOWER HEADSTOCK MOTOR
1-1/2 HORSEPOWER I.D. SPINDLE MOTOR
1 HORSEPOWER HYDRAULIC MOTOR
3 HORSEPOWER WHEELHEAD MOTOR
|
|
Ad # 1649 | Cylindrical Grinders (O.D. & I.D.) |
1974? |
Sheffield |
MultiForm 109-A |
Good |
Sold |
Photo /
More Info. |
Sheffield MultiForm 109-A Crush Grinder: Complete with MultiForm TrueCrush Dresser, coolant system and separator |
|
Ad # 9137 | Cylindrical Grinders (O.D. & I.D.) |
|
cincinatti |
OH |
Good |
Sold |
Photo /
More Info. |
OD 4 in swing x 18 inches center- 4inch plain -OH: 4 inch swing x 18" centers
14" wheel
includes original manual |
|
Ad # 7134 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
26 x 50 OD Grinder |
Fair |
sold |
Photo /
More Info. |
26" x 50" OD Landis Grinder : Swing: 26"
DBC: 50"
Diameter of grinding wheel: 28" |
|
Ad # 5260 | Cylindrical Grinders (O.D. & I.D.) |
|
Heald |
75-A |
Good |
sold |
Photo /
More Info. |
Heald ID Grinder: 9" Magnetic Chuck
1" Arbor
Chuck speed 550-1740 rpm
|
|
Ad # 2483 | Cylindrical Grinders (O.D. & I.D.) |
50's |
CINCINNATI SENDZIMIR |
LR |
Good |
Sold |
No Photo /
More Info. |
14” X 72” CINCINNATI SENDZIMIR CNC ROLL GRINDER: Swing Over Bed: 15 ½”
Max. Roll Length: 102 ½”
Max. Roll Weight: 6500 Lbs.
Workhead Type: Dead
Workhead Speeds, Programmable: 0-300 rpm
Max. Grinding Wheel Size: 24” x 2” x 12” Standard
CNC System: KPM 5
Infeed Screw: Ballscrew
Footstock Type Handwheel
Footstock Center: #13 B&S
rebuilt 90-91
|
|
Ad # 7494 | Cylindrical Grinders (O.D. & I.D.) |
1979 |
TOSHIBA |
KWA1250/1650B |
Very Good |
Sold |
Photo /
More Info. |
Roll Grinder :50" swing x 236" centers: FOR SALE
*ROLL GRINDER
Maker : TOSHIBA(JAPAN)
Model : KWA1250/1650B
Year : 1979(NC,Overhaul 1998)
Swing---1255mm
Distance between centers--- Max 6,000mm
Grinding Wheel size---915mm
Crown---OK (NC Type)
Controller---Fanuc 15M(1998)
Roll Drive Motor---22Kw 1,500rpm
Wheel Motor---35Kw, 1300rpm
Grinding Slide feed---2,400mm/min
Traverse Motor---3.3Kw, 2400
Workpiece weight---40ton
Weight (machine---82.5ton
Voltage---440V/220V
Location --- Korea
|
|
Ad # 10080 | Cylindrical Grinders (O.D. & I.D.) |
1970? |
Brown and Sharpe |
#13 |
Good |
sold |
Photo /
More Info. |
8 x 24: Grinding Capacity: 8" x 24"
Longitudinal Table Travel: 22"
Cross Feed Travel: 10-1/4"
Head Vertical Travel: 8-3/8"
Grinding Wheel Size: 7" Dia. x 1/2" Wide
Grinding Wheel Speeds (3) 2730/3600/5150 RPM
Work Head Speeds (4): 128/195/325/540 RPM
Power Table Feed Rates (6): 7.7 - 100 IPM
1 HP Spindle Motor
1/4 HP Table Drive Motor
1/6 HP Work Head Motor |
|
Ad # 10507 | Cylindrical Grinders (O.D. & I.D.) |
|
Studer |
Model RHU-450 |
Good |
sold |
Photo /
More Info. |
Studer Model RHU-450, Universal Cylindrical Grinder 12" x 30"cap: Studer Universal Cylindrical Grinder
Has Swing Down I.D. Grinding Head
Model RHU-450
Max. swing diameter 12"
Max. distance between centers 30"/34"
Max. diameter grinding wheel 12"
Table overall surface area 4.5"x38"
Table approx. feed range (variable) 0 - 20 FPM
Workhead speed range (variable) 0 - 650 RPM
Grinding wheelhead infeed range .008" - .072"
Grinding wheelhead drive motor(approx.) 2 HP
|
|
Ad # 11859 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati |
4U2B |
Excellent |
sold |
Photo /
More Info. |
10" OD, 24" length: 10" OD capacity
24" max length
12" dia. OD grinding wheel.
Has steady rests
4 jaw chuck.
lots of tooling & manuals, very little use on
machine |
|
Ad # 2487 | Cylindrical Grinders (O.D. & I.D.) |
1966 |
FARREL- GIUSTINA |
|
Very Good |
SOLD |
Photo /
More Info. |
REBUILT FARREL- GIUSTINA TWO WHEEL ROLL GRINDER : Max. Roll Dia., on center w/ full size wheel 50” Solid
Max. Roll Dia., above centerline (11”) 63”,
Min. Roll Dia., ground on centerline 8”
Nominal Roll Face ground 367”
Max. Carriage traverse 390”, Optional up to 700”
Max. Crown/Concavity of roll unlimited
Max. weight of roll supported by bed 90 ton
Work speeds, rpm, programmable .2 – 35 rpm
Work Motor, Baldor AC Vector, with dynamic braking 60 hp, 1180/3600 RPM
Feedback GE/Fanuc encoder
Grinding Wheel Dia., std. 20”
Grinding Wheel Face, std. 3”
Spindle speed range, bi-directional, programmable 233–1400 rpm
Grinding wheel motors, Baldor AC Vector 30 hp, 1180/3600 rpm
Carriage Speed, programmable 0–80 ipm
Carriage Motor, GE/Fanuc Servo 7.3 kW 2000 rpm
Carriage Gearbox, Cone Textron 25:1
Over all width of each way 7 ¾”
Over all length of carriage 88”
|
|
Ad # 7652 | Cylindrical Grinders (O.D. & I.D.) |
1967 |
CINCINNATI |
|
Good |
SOLD |
Photo /
More Info. |
6´´ X 18´´ CINCINNATI PLAIN CYLINDERICAL GRINDER: 6´´ X 18´´ CINCINNATI PLAIN CYLINDERICAL GRINDER
SWING OVER BED....................... 6-3/4´´
DISTANCE BETWEEN CENTERS ............ 18´´
HYDRAULIC TABLE TRAVEL .............. YES
DIAMETER OF GRINDING WHEEL .......... 24´´
WIDTH OF GRINDING WHEEL ............. 2´´
AUTOMATIC INFEED AT TABLE REVERSAL .. YES
AUTO CYCLE .......................... YES
SPARKOUT TIMER ...................... YES
WHEEL HEAD MOTOR, HORSEPOWER ........ 7-1/2
WORK HEAD MOTOR, HORSEPOWER ......... 3/4
HYDRAULIC MOTOR, HORSEPOWER ......... 1 |
|
Ad # 2485 | Cylindrical Grinders (O.D. & I.D.) |
1967 |
FARREL |
|
Very Good |
sold |
Photo /
More Info. |
REBUILT FARREL TWO WHEEL ROLL GRINDER : Max. Roll Dia., on center with full size wheel 42” Solid 57"
Max. Roll Dia., above centerline (11”) 63" 78"
Min. Roll Dia., ground on centerline 8" 12"
Nominal Roll Face ground 316"
Max. Carriage traverse 340" up to 700"
Max. Crown/Concavity of roll unlimited
Max. weight of roll supported by bed 90 Ton
Work speeds, rpm, programmable .2 – 35 rpm
Work Motor, Baldor AC Vector, with dynamic braking 60 hp, 1180/3600 RPM
Feedback GE/Fanuc encoder
Grinding Wheel Dia., std. 20”
Grinding Wheel Face, std. 3”
Spindle speed range, bi-directional, programmable 233 – 1400 rpm
Grinding wheel motors, Baldor AC Vector 30 hp, 1180/3600 rpm
|
|