Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11185 | Cylindrical Grinders (O.D. & I.D.) |
rebuilt |
Armstrong |
B1-232 |
Excellent |
sold |
Photo /
More Info. |
Cott -Rubber roll grinder 8" dia x 21"L: Cott Grinder
Used to gring rubber rolls
Completly rebuilt-looks new
8" Plus roll Dia
21" centers
dust collector chute
very nice machine!! |
|
Ad # 16123 | Cylindrical Grinders (O.D. & I.D.) |
1961 |
B & S |
# 1 |
Good |
sold |
Photo /
More Info. |
6 x 20: Universal with swiveling work head and wheel head
and complete ID spindle, plunge and traverse, 3/4 x
10 wheel, centers, work rest, manual |
|
Ad # 10336 | Cylindrical Grinders (O.D. & I.D.) |
1986(?) |
Berco |
RTM351/3000 |
Excellent |
Sold |
Photo /
More Info. |
116 inches length: Specifications Standard Equipment
Max. Dist. Btwn. Chucks: 116.500" / 2960mm
Max. Dist. Btwn. Centers: 118.109" / 3000mm
Max. Swing Over Table: 27.500" / 700mm
Stroke Capacity: 13.375" / 340mm
Grinding Wheel Diameter: 36.000" / 915mm
Machine Weight: 16534 lbs. / 7500 kg
Includes:
Setup Fixture w/Indicator
Wheel Dresser
3 Steady Rests
4 Wheel Hubs & Balancing Arbor
1 Radius Dresser
1 Arnold Grinding Gauge with 3" to 5" foot
and 5" to 8" foot
Miscellaneous Service Tools
|
|
Ad # 5386 | Cylindrical Grinders (O.D. & I.D.) |
|
Bertoni &Cotti |
TM 260 |
Very Good |
Sold |
Photo /
More Info. |
BERTONI & Cotti Crankshft Grinder, Model TM260: Includes Leeson Speedmaster, slide feed rate motor controller. |
|
Ad # 5618 | Cylindrical Grinders (O.D. & I.D.) |
94?? |
Bickford/G&L |
FR-200 |
Very Good |
sold |
Photo /
More Info. |
Universal OD/ID Grinder with CAM Grinding Capabilities: Table: 13" x 59"
swing 8" max
Tailstock attachment
Swivel Wheelhead with 8" vertical Movement
Wheelhead has 3 Spindles Mounted on it:
2 OD Wheels-thru type --one on each end
1 ID Spindle
Includes cams for tap grinding:
ID Grinding attach included
a few 5C tap collets
ID spindle is a Precise Grinding spindle , 3" diam. with Precise variable speed drive.
Workhead: Swivels
Workhead Drive: 1/2 hp @ 115V |
|
Ad # 4910 | Cylindrical Grinders (O.D. & I.D.) |
|
BLM |
RC 280 |
Excellent |
Sold |
Photo /
More Info. |
LARGE BLM MADEL RC 280 CRANK SHAFT GRINDER: All Metric machine
10-12" Swing
Distance Between Chuck Faces: 47"
Distance Between Spindle Faces: 50"
Grinding Wheel: 30" diameter
Coolant System
Also Includes:
Workpiece Counter Balance Sets
Grinding Wheel Balancer
Set of Set-Up Precision Gauges
Dual Workheads, each with a 8" chuck |
|
Ad # 14895 | Cylindrical Grinders (O.D. & I.D.) |
1953 |
Brown & Sharp |
# 2 |
Good |
sold |
Photo /
More Info. |
ID/OD grinder: 14" swing x 30" centers: Brown & Sharp Universal ID/OD grinder # 2 S/N#521-2-11
ID/OD grinder: 15" max swing x 30" centers
swivel table and head-universal
grinding wheel: 16" dia
Std specs below-please verify actual machine
14" X 30" BROWN & SHARPE UNIVERSAL
I.D./O.D. CYLINDRICAL GRINDER
MODEL:#2 S/N: 521-2-11 NEW: 1953
NOMINAL SWING ................... 14"
DISTANCE BETWEEN CENTERS, NOMINAL ... 30"
DISTANCE BETWEEN CENTERS, MAX ... 33-3/4"
WHEELHEAD MOTOR ........... 3 HP
WHEELHEAD SPINDLE SPEEDS (3) .... 2100, 2400 & 2800 RPM
WHEEL SIZE .......... 14" X 1-1/2" X 5"
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG.
WHEEL SPINDLE SWIVELS ...........90 DEG.
HEADSTOCK MOTOR ............. 1/2 HP
HEADSTOCK SWIVELS ........... 180 DEG.
INFINITELY VARIABLE SPINDLE SPEEDS ..... 25 TO 500 RPM
SPINDLE NOSE ............... A2-6"
INFINITELY VARIABLE TABLE SPEED ........ 3" TO 150" IPM
TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1" SLOW
0.1" FAST
DWELL @ TABLE REVERSAL .. 0 TO 2-1/2" SECONDS
SWIVEL TABLE - TAPER PER FOOT .... 5" BACK
1-1/2" FORWARD
- SCALES FOR ANGULAR SETTING 12 DEG. BACK
3 DEG. FORWARD
AUTOMATIC CROSS FEED, INF. VARIABLE 0.0001" - .003"
POSITIVE STOP SETTING ...... 0.00002"
APPROXIMATE MACHINE WEIGHT ...... 8,300 LBS
DIMENSIONS ..... 112"W X 62"L X 61"H
EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT-off machine now but have it
HYDRAULIC OPERATOR FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-AUTOMATIC PLUNGE INFEED
RIGHT OR LEFT END WHEEL MOUNTING
DOUBLE SWIVEL WHEELHEAD - SWIVELLING @ WHEEL
SPINDLE HEAD OR @ THE WHEEL SLIDE PERMITS ANY
COMPOUND SETTING REQUIRED IN COMBINATION
STRAIGHT AND TAPER GRINDING
DUAL DEAD/LIVE HEADSTOCK SPINDLE
PULL-OUT HYDRAULIC SYSTEM
COOLANT SYSTEM
CHUCK IS MOUNTED ON WORKHEAD SPINDLE
WORK LIGHT
PRESENTLY WIRED FOR 3/60/220 VOLTS
Note: very nice running grinder! |
|
Ad # 7791 | Cylindrical Grinders (O.D. & I.D.) |
|
Brown & Sharp |
# 13 |
Excellent |
Sold |
Photo /
More Info. |
8" x 24" OD/Universal Tool Grinder: Diameter Swing - Maximum 8"
Distance Between Centers - Maximum 20"
Travel - Longitudinal 20-1/2"
- Traverse 10-1/4"
- Vertical 8-3/8"
Wheel Size 7" x 1/2" x 1-1/4"
Grinding Wheel Speeds (3) 2730 - 5150 RPM
Workhead Speeds (4) 128 - 540 RPM
Table Travel Speeds (6) - Automatic 7.7 - 100 IPM
- Hand Slow and Fast
Table Swivels 3"/Foot Front and Back
Workhead Swivels - Counterclockwise 100 Degrees
- Clockwise 80 Degrees
Grinding Head Swivels 360 Degrees
EQUIPPED WITH:
Tailstock with #2MT Taper
Workhead with #2MT
1 HP Grinding Head Motor, 1735 RPM, 230/460 V, 3.4/1.7 Amps, 3 Phase
1/6 HP Workhead Motor, 1140 RPM, 208-220/440 V, .90/.45 Amps, 3 Phase
1/4 HP Longitudinal Feed Motor, 1725 RPM, 208-220/440 V, 1.0/.5 Amps, 3 Phase
Worklight
*Preliminary Specifications Subject to Verification.
|
|
Ad # 14895 | Cylindrical Grinders (O.D. & I.D.) |
1953 |
Brown & Sharp |
# 2 |
Good |
sold |
Photo /
More Info. |
ID/OD grinder: 14" swing x 30" centers: Brown & Sharp Universal ID/OD grinder # 2 S/N#521-2-11
ID/OD grinder: 15" max swing x 30" centers
swivel table and head-universal
grinding wheel: 16" dia
Std specs below-please verify actual machine
14" X 30" BROWN & SHARPE UNIVERSAL
I.D./O.D. CYLINDRICAL GRINDER
MODEL:#2 S/N: 521-2-11 NEW: 1953
NOMINAL SWING ................... 14"
DISTANCE BETWEEN CENTERS, NOMINAL ... 30"
DISTANCE BETWEEN CENTERS, MAX ... 33-3/4"
WHEELHEAD MOTOR ........... 3 HP
WHEELHEAD SPINDLE SPEEDS (3) .... 2100, 2400 & 2800 RPM
WHEEL SIZE .......... 14" X 1-1/2" X 5"
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG.
WHEEL SPINDLE SWIVELS ...........90 DEG.
HEADSTOCK MOTOR ............. 1/2 HP
HEADSTOCK SWIVELS ........... 180 DEG.
INFINITELY VARIABLE SPINDLE SPEEDS ..... 25 TO 500 RPM
SPINDLE NOSE ............... A2-6"
INFINITELY VARIABLE TABLE SPEED ........ 3" TO 150" IPM
TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1" SLOW
0.1" FAST
DWELL @ TABLE REVERSAL .. 0 TO 2-1/2" SECONDS
SWIVEL TABLE - TAPER PER FOOT .... 5" BACK
1-1/2" FORWARD
- SCALES FOR ANGULAR SETTING 12 DEG. BACK
3 DEG. FORWARD
AUTOMATIC CROSS FEED, INF. VARIABLE 0.0001" - .003"
POSITIVE STOP SETTING ...... 0.00002"
APPROXIMATE MACHINE WEIGHT ...... 8,300 LBS
DIMENSIONS ..... 112"W X 62"L X 61"H
EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT-off machine now but have it
HYDRAULIC OPERATOR FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-AUTOMATIC PLUNGE INFEED
RIGHT OR LEFT END WHEEL MOUNTING
DOUBLE SWIVEL WHEELHEAD - SWIVELLING @ WHEEL
SPINDLE HEAD OR @ THE WHEEL SLIDE PERMITS ANY
COMPOUND SETTING REQUIRED IN COMBINATION
STRAIGHT AND TAPER GRINDING
DUAL DEAD/LIVE HEADSTOCK SPINDLE
PULL-OUT HYDRAULIC SYSTEM
COOLANT SYSTEM
CHUCK IS MOUNTED ON WORKHEAD SPINDLE
WORK LIGHT
PRESENTLY WIRED FOR 3/60/220 VOLTS
Note: very nice running grinder! |
|
Ad # 10627 | Cylindrical Grinders (O.D. & I.D.) |
1970 |
Brown & Sharpe |
1020U |
Very Good |
Sold |
Photo /
More Info. |
10 x 20: Brown & Sharpe ID/OD Grinder
Model: 1020U
Serial: 521-1020-226
Built in: 1970s
Comes with transformer
Wired for 460 volts, 3 phase, 60 cycle
Control voltage 115 volts
Full load amperes 5
Ampere rating largest motor 3.1 amperes
Very good condition. Everything works: extra hubs, wheels, and steady rests included.
Std specs below-please verify!
Universal O.D. / ID. grinder W/ drop Down I.D spindle
7.5" Dia. 4 jaw chuck
12" dia, wheel
11" swing x 20" centers
Headstock Speeds 60-600 RPM
Table speeds 10-70 IPM
2 HP main motor
Web-Specs
Grinding Capacity: 10" x 20"
Grinding Wheel Size: 10" Dia. x 1/2" Wide
Grinding Wheel Speeds: 2,500, 3,000 & 3,600 RPM
Table Longitudinal Feed Rates, Variable: 3 - 150 IPM
Table Travel Per Rev. of Handwheel, Slow: .1"
Table Travel Per Rev. of Handwheel, Fast: 2.5"
Table Dwells: 0 - 2-1/2 Seconds
Swivel Table Angular Adjustment: 8 Degrees
Table Cross Feed Rates: .0001" - .003"
Work Head Speeds, Variable: 60 - 600 RPM
Machine Weight, Approx.: 5,700 Lbs.
Combination Live/Dead Headstock
Equipped With:
Swing Down Internal Grinding Attachment
Coolant Pump & Tank
|
|
Ad # 7682 | Cylindrical Grinders (O.D. & I.D.) |
1960 |
BROWN & SHARPE |
4 |
Good |
sold |
Photo /
More Info. |
15´´ X 60´´ BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER: 15´´ X 60´´ BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER
SWING OVER TABLE ................ 14´´
CENTER DISTANCE ................. 60´´
WHEEL SIZE ...................... 14´´ X 1´´ X 5´´
HEADSTOCK SPEED ................. 25 TO 500 RPM
TABLE TRAVERSE SPEED ............ 3 TO 150 IPM
TABLE SWIVELS, BACK............ 6 DEGREES
TABLE SWIVELS, FORWARD .......... 2 - 30 DEGREES
AUTOMATIC INFEED @ REVERSAL ..... .0001´´ TO .003´´
DROP DOWN I.D. SPINDLE .......... YES
COOLANT ......................... YES
ELECTRALIGN TAPER ADJUSTMENT .... YES
SPINDLE MOTOR ................... 1 HORSEPOWER
WHEEL MOTOR ..................... 3 HORSEPOWER |
|
Ad # 7264 | Cylindrical Grinders (O.D. & I.D.) |
|
BROWN & SHARPE |
No.4 |
Excellent |
Sold |
Photo /
More Info. |
14” x 60”cc No.4 BROWN & SHARPE Universal cylindrical Grinder: 14” x 60”cc No.4 BROWN & SHARPE Universal cylindrical Grinder with swing-do... |
|
Ad # 10080 | Cylindrical Grinders (O.D. & I.D.) |
1970? |
Brown and Sharpe |
#13 |
Good |
sold |
Photo /
More Info. |
8 x 24: Grinding Capacity: 8" x 24"
Longitudinal Table Travel: 22"
Cross Feed Travel: 10-1/4"
Head Vertical Travel: 8-3/8"
Grinding Wheel Size: 7" Dia. x 1/2" Wide
Grinding Wheel Speeds (3) 2730/3600/5150 RPM
Work Head Speeds (4): 128/195/325/540 RPM
Power Table Feed Rates (6): 7.7 - 100 IPM
1 HP Spindle Motor
1/4 HP Table Drive Motor
1/6 HP Work Head Motor |
|
Ad # 14334 | Cylindrical Grinders (O.D. & I.D.) |
1965 |
Brown and Sharpe |
# 2 Universal |
Good |
sold |
Photo /
More Info. |
OD:21" Swing has 3" Riser x 30" : Brown and Sharpe #2 universal Grinder
Two Wheel
3" Riser swing 21" x 30"
460 voltage
Coolant tank
Machine set up for facing parts.
MODEL:B & S- #2
WHEELHEAD MOTOR ........... 3 HP
WHEELHEAD SPINDLE SPEEDS
(3):2100,2400,2800 RPM
WHEEL SIZE .......... 14" X 1-1/2" X 5"
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER
...... 90 DEG.
WHEEL SPINDLE SWIVELS ...........90 DEG.
HEADSTOCK MOTOR ............. 1/2 HP
HEADSTOCK SWIVELS ........... 180 DEG.
INFINITELY VARIABLE SPINDLE SPEEDS:25 TO
500 RPM
SPINDLE NOSE ............... A2-6"
INFINITELY VARIABLE TABLE SPEED:3" TO
150" IPM
TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1"
SLOW
0.1" FAST
DWELL @ TABLE REVERSAL:0 TO 2-1/2"
SECONDS
SWIVEL TABLE - TAPER PER FOOT .... 5"
BACK
1-1/2" FORWARD
- SCALES FOR ANGULAR SETTING 12 DEG.
BACK
3 DEG. FORWARD
AUTOMATIC CROSS FEED, INF. VARIABLE
0.0001" - 0.003"
POSITIVE STOP SETTING ...... 0.00002"
APPROXIMATE MACHINE WEIGHT . 8,300 LBS
DIMENSIONS ..... 112"W X 62"L X 61"H
EQUIPPED WITH:
HYDRAULIC OPERATOR FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-AUTOMATIC PLUNGE INFEED
RIGHT OR LEFT END WHEEL MOUNTING
DOUBLE SWIVEL WHEELHEAD - SWIVELLING @
WHEEL
SPINDLE HEAD OR @ THE WHEEL SLIDE
PERMITS
ANY
STRAIGHT AND TAPER GRINDING
DUAL DEAD/LIVE HEADSTOCK SPINDLE
PULL-OUT HYDRAULIC SYSTEM
COOLANT SYSTEM
Note
No tail stock
No I.D. Head |
|
Ad # 6449 | Cylindrical Grinders (O.D. & I.D.) |
1993 |
CHEVALIER |
GU-1124A |
Very Good |
sold |
Photo /
More Info. |
11´´ X 24´´ CHEVALIER UNIVERSAL CYLINDRICAL GRINDER: 11´´ X 24´´ CHEVALIER UNIVERSAL CYLINDRICAL GRINDER:
MAXIMUM WORK SWING ........................ 10-1/2´´
DISTANCE BETWEEN CENTERS .................. 24´´
GRINDING WHEEL SIZE ....................... 16´´ X 1´´ X 5´´
GRINDING WHEEL SPEEDS ..................... (2) 1600 & 1900 RPM
WORKHEAD SPEEDS (VARIABLE) ................ 10 TO 507 RPM
TABLE SPEED (VARIABLE) .................... 2 TO 155 IPM
3-JAW WORKHEAD CHUCK ...................... 8´´
SWIVEL WORKHEAD / WHEELHEAD / TABLE ....... YES
DROP-DOWN I.D. GRINDING SPINDLE ........... YES
COOLANT ................................... YES
PLUNGE & SPARKOUT ......................... YES
HYDRAULIC TABLE TRAVERSE .................. YES
I.D. GRINDING SPINDLE MOTOR ............... 2 HORSEPOWER
HYDRAULIC MOTOR ........................... 2 HORSEPOWER
WHEELHEAD MOTOR ........................... 5 HORSEPOWER |
|
Ad # 6689 | Cylindrical Grinders (O.D. & I.D.) |
1991 |
CHEVALIER |
GU-1460-A |
Excellent |
Sold |
Photo /
More Info. |
14”x60”cc CHEVALIER hyd Universal cylindrical grinder, Model GU-1460-A: 14”x60”cc CHEVALIER hydraulic Universal cylindrical grinder w/swing-down in... |
|
Ad # 7661 | Cylindrical Grinders (O.D. & I.D.) |
1970 |
CHURCHILL |
PBX |
Good |
SOLD |
Photo /
More Info. |
12´´ X 40´´ CHURCHILL UNIVERSAL CYLINDRICAL GRINDER: 12´´ X 40´´ CHURCHILL UNIVERSAL CYLINDRICAL GRINDER
MAXIMUM SWING OVER BED ............ 13´´
DISTANCE BETWEEN CENTERS .......... 40´´
HYDRAULIC TABLE TRAVERSE .......... 3 TO 190 IPM
WORKHEAD SPEEDS ................... 20 TO 400 RPM (VARIABLE)
AUTOMATIC INFEED .................. .0002 TO .0012 (ON DIAMETER)
WHEEL SIZE ........................ 18´´ X 2´´ X 8´´
WHEELHEAD SWIVEL .................. 180 DEGREES
WORKHEAD SWIVEL - 90 DEGREES FROM WHEEL, 90 DEGREES TO WHEEL
VARIABLE SPEED WORKHEADDROP DOWN INTERNAL ATTACHMENT
WAY COVERS
COOLANT
7-1/2 HORSEPOWER WHEELHEAD MOTOR
5 HORSEPOWER HYDRAULIC MOTOR
1-1/2 HORSEPOWER INTERNAL SPINDLE MOTOR |
|
Ad # 864 | Cylindrical Grinders (O.D. & I.D.) |
70's |
Cincinatti |
3P2D1L-106 |
Good |
Sold |
Photo /
More Info. |
O.D. Grinder 10 x 36": variable speed, coolant; under power |
|
Ad # 9137 | Cylindrical Grinders (O.D. & I.D.) |
|
cincinatti |
OH |
Good |
Sold |
Photo /
More Info. |
OD 4 in swing x 18 inches center- 4inch plain -OH: 4 inch swing x 18" centers
14" wheel
includes original manual |
|
Ad # 11487 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinatti |
3P1C1L-46 |
Fair |
sold |
Photo /
More Info. |
6" swing x 36" centers: Cincinatti 6" x 36" OD grinder
6" swing
36" centers
2" wide wheel |
|
Ad # 8778 | Cylindrical Grinders (O.D. & I.D.) |
|
Cincinnati |
D-E |
Very Good |
Sold |
Photo /
More Info. |
14 x 36: MAKE: CINCINNATI MILACRON
TYPE: UNIVERSAL GRINDER
MODEL: D-E
CAPACITY: 14' OR 355.6MM DIA. AND 36' OR 914.4MM IN LENGTH
SERIAL# 353213D73-0006
CONTROL VOLTAGE: 115-120VAC 50/60 HERTZ
AC INPUT POWER 230VAC 3 PHASE 50/60 HERTZ
FULL LOAD AMPS: 30 AMPERES
TERMS AND CONDITIONS:
SPECIFICATIONS AND EQUIPMENT SUBJECT TO VERIFICATION WITH CORPORATE APPROVAL
FULL PAYMENT DUE PRIOR TO MACHINE PREPARATION FOR SHIPMENT
SUBJECT TO AVAILABILIty
collector with it
|
|
Ad # 7678 | Cylindrical Grinders (O.D. & I.D.) |
1942 |
CINCINNATI |
ER |
Good |
sold |
Photo /
More Info. |
12´´ X 72´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 12´´ X 72´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
SWING OVER BED ...................... 12-1/2´´
DISTANCE BETWEEN CENTERS ............ 72´´
HYDRAULIC TABLE TRAVEL .............. 3 TO 220 IPM
AUTOMATIC INFEED .................... .002´´ TO .0125´´
WORKHEAD SPEEDS (VARIABLE) .......... 55 TO 500 RPM
GRINDING WHEEL ...................... 14´´ X 1-1/2´´
DROP DOWN ID ATTACHMENT
TABLE MOUNTED DRESSER
5´´ STEADY REST
BACKREST
COOLANT
3 HORSEPOWER WHEELHEAD MOTOR
1-1/2 HORSEPOWER HYDRAULIC MOTOR
1 HORSEPOWER VARIABLE SPEED WORKHEAD MOTOR
3/4 HORSEPOWER ID WHEELHEAD MOTOR |
|
Ad # 7663 | Cylindrical Grinders (O.D. & I.D.) |
1941 |
cincinnati |
1P5D1L-8 |
Good |
Sold |
Photo /
More Info. |
16in x 36in: 16"x36"
3"x30"grinding wheel
20hp |
|
Ad # 6450 | Cylindrical Grinders (O.D. & I.D.) |
1952 |
CINCINNATI |
|
Very Good |
sold |
Photo /
More Info. |
10´´ X 24´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 10" X 24" CINCINNATI UNIVERSAL CYLINDRICAL
GRINDER:
TYPE ................................ KNEE HOLE
SWING OVER BED - MAXIMUM ............ 11´´
MAXIMUM CENTER DISTANCE............ 24´´
HYDRAULIC TABLE TRAVERSE ............ YES
AUTOMATIC INFEED AT TABLE REVERSAL .. YES
VARIABLE SPEED WORKHEAD ............. YES
GRINDING WHEEL SIZE ................. 12´´ DIA. X
1´´ W
INTERNAL GRINDING ATTACHMENT ........ YES
COOLANT ............................. YES
DRESSER MOUNTED ON TAILSTOCK ........ YES
SWIVEL .............................. TABLE -
WORKHEAD - WHEELHEAD
WHEELHEAD MOTOR ..................... 2
HORSEPOWER
I.D. SPINDLE MOTOR .................. 1
HORSEPOWER
WORKHEAD MOTOR ...................... 1/4
HORSEPOWER |
|
Ad # 14790 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati |
8 x 12 x 36 |
Good |
sold sold |
Photo /
More Info. |
12"dia x 36"length: Concinnati 8 x 12 x 36 OD grinder
OD only
max swing 13"
main motor: 5HP
center distance:36" max
vari speed on work head
universal table
16" dia wheel x 1" on machine
coolant
Note: machine was completly refurbished &
upgraded
then never run,looks great!
rigging/loading fee $1000.00 |
|
Ad # 2456 | Cylindrical Grinders (O.D. & I.D.) |
1970 |
CINCINNATI |
LR, 1970 |
Needs Work |
SOLD |
Photo /
More Info. |
14” X 168” CINCINNATI SEMI AUTOMATIC ROLL GRINDER : Max. Swing over Table: 15 1/2"
Max. Weight of Rolls on Centers: 6500 lbs.
Max. Weight of Rolls on Journal Rests: 6500 lbs.
Max. Camber on diameter: 040" std.
Nominal Distance Between Centers: 168"
WHEELHEAD
Max. Crossfeed: 11"
Grinding Wheel, std.: 24" x 2" x 12"
Grinding Wheel Spindle Speeds,variable: 500-1200rpm
Spindle Bearings, Filmatic: 5 shoe
HEADSTOCK
Work Speeds, Variable: 38-136 rpm
Taper in workhead: 13 B&S
FOOTSTOCK
Taper in footstock spindle: 13 B&S
TABLE
Table Traverse, variable: 3 - 120 IPM
Hand Table Traverse: 1/8" per rev.
Table Type: One Piece
CROSS TRAVERSE & SIZING
Wheelhead movement per rev. of handwheel: 1/16"
Min. infeed increment on dia.: 0001"
Auto. pickfeed at table reversal Max: 0012"
Minimum: 0002"
Power Cross Traverse Rate: 16 IPM
|
|
Ad # 7653 | Cylindrical Grinders (O.D. & I.D.) |
1967 |
CINCINNATI |
10R X 72 |
Good |
sold |
Photo /
More Info. |
10´´ X 72´´ CINCINNATI PLAIN CYLINDRICAL GRINDER: 10´´ X 72´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
NOMINAL SWING OVER TABLE .............. 10´´
MAXIMUM SWING SWING OVER TABLE ........ 10-15/16
´´
DISTANCE BETWEEN CENTERS .............. 72´´
STANDARD GRINDING WHEEL ............... 30´´ X 3
´´ X 12´´
GRINDING WHEEL SPEED .................. 830 RPM
WORKHEAD SPEEDS .......................
50/75/113/170 RPM
TABLE TRAVERSE RATES .................. 3 TO 220
IPM
FLOOR TO WORK CENTER .................. 39-1/2´´
BEHIND THE WHEEL PROFILE TRUING ....... YES
AUTOMATIC GAP ELIMINATOR .............. YES
ACRASIZE GAGING ....................... YES
DUAL FEED RATE CONTROL ................ YES
SPARKOUT TIMER ........................ YES
WORKHEAD MOTOR ........................ 1-1/2
HORSEPOWER
GRINDING WHEEL MOTOR .................. 15
HORSEPOWER
elect control
currently not under power but have seen run run.. |
|
Ad # 7662 | Cylindrical Grinders (O.D. & I.D.) |
|
CINCINNATI |
|
Good |
Sold |
Photo /
More Info. |
12´´ X 48´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 12´´ X 48´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
MAXIMUM WORK SWING ............... 12-15/16´´
DISTANCE BETWEEN CENTERS ......... 48´´
GRINDING WHEEL SIZE .............. 14´´ X 1´´ X 5´´
TABLE TRAVERSE SPEEDS (VARIABLE) . 3 TO 240 IPM
HEADSTOCK SPEEDS (VARIABLE) ...... 55 TO 500 RPM
DROP DOWN I.D. SPINDLE
PICK FEED
COOLANT
SWIVEL WHEELHEAD / WORKHEAD / TABLE
HYDRAULIC TABLE TRAVERSE
1 HORSEPOWER HEADSTOCK MOTOR
1-1/2 HORSEPOWER I.D. SPINDLE MOTOR
1 HORSEPOWER HYDRAULIC MOTOR
3 HORSEPOWER WHEELHEAD MOTOR
|
|
Ad # 11859 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati |
4U2B |
Excellent |
sold |
Photo /
More Info. |
10" OD, 24" length: 10" OD capacity
24" max length
12" dia. OD grinding wheel.
Has steady rests
4 jaw chuck.
lots of tooling & manuals, very little use on
machine |
|
Ad # 7652 | Cylindrical Grinders (O.D. & I.D.) |
1967 |
CINCINNATI |
|
Good |
SOLD |
Photo /
More Info. |
6´´ X 18´´ CINCINNATI PLAIN CYLINDERICAL GRINDER: 6´´ X 18´´ CINCINNATI PLAIN CYLINDERICAL GRINDER
SWING OVER BED....................... 6-3/4´´
DISTANCE BETWEEN CENTERS ............ 18´´
HYDRAULIC TABLE TRAVEL .............. YES
DIAMETER OF GRINDING WHEEL .......... 24´´
WIDTH OF GRINDING WHEEL ............. 2´´
AUTOMATIC INFEED AT TABLE REVERSAL .. YES
AUTO CYCLE .......................... YES
SPARKOUT TIMER ...................... YES
WHEEL HEAD MOTOR, HORSEPOWER ........ 7-1/2
WORK HEAD MOTOR, HORSEPOWER ......... 3/4
HYDRAULIC MOTOR, HORSEPOWER ......... 1 |
|
Ad # 11332 | Cylindrical Grinders (O.D. & I.D.) |
1981?? |
Cincinnati |
DA-370 Plain |
Good |
sold |
Photo /
More Info. |
10 x 48": Cincinnati DA 370 Plain Cyylindrical grinder
10 x 48"
spindle travel-
max workpiece weight-
manuals
more info & pix to follow |
|
Ad # 7654 | Cylindrical Grinders (O.D. & I.D.) |
1941 |
CINCINNATI |
|
Good |
Sold |
Photo /
More Info. |
10´´ X 72´´ CINCINNATI PLAIN CYLINDRICAL GRINDER: 10´´ X 72´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
MAXIMUM SWING OVER TABLE .......... 10-15/16´´
MAXIMUM CENTER DISTANCE ........... 72´´
GRINDING WHEEL SIZE ............... 30´´ X 3´´ X 12´´
GRINDING WHEEL SPEED .............. 830 RPM
WORKHEAD SPEEDS ................... 62 TO 263 RPM
TABLE TRAVERSE SPEEDS ............. 3 TO 220 IPM
AUTOMATIC INFEED .................. YES
COOLANT ........................... YES
SWIVEL TABLE ...................... YES
TABLE MOUNTED DRESSER ............. YES
GRINDING WHEEL MOTOR .............. 15 HORSEPOWER
WORKHEAD MOTOR .................... 1 HORSEPOWER
HYDRAULIC MOTOR ................... 1-1/2 HORSEPOWER |
|
Ad # 7657 | Cylindrical Grinders (O.D. & I.D.) |
1973 |
CINCINNATI |
370 PLAIN |
Very Good |
sold |
Photo /
More Info. |
14´´ X 48´´ CINCINNATI PLAIN CYLINDRICAL GRINDER: 14´´ X 48´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
MACHINE EQUIPPED WITH ELECTRONIC COMMAND (BALL SCREW) INFEED
SWING OVER BED .......................... 14-1/2´´
DISTANCE BETWEEN CENTERS ................ 48´´
HYDRAULIC TABLE TRAVEL ............. 3 TO 250 IPM
AUTOMATIC INFEED OF WHEEL HEAD 0.00075 - 0.150 ipm
DIAMETER OF GRINDING WHEEL .............. 30´´
MAXIMUM WIDTH OF GRINDING WHEEL ......... 4´´
PLUNGE GRINDING
WORKHEAD JOG/HEADSWIVEL TABLE WITH DIAL INDICATOR
AUTOMATIC WHEEL BALANCING
DRESSER MOUNTED ON TAILSTOCKCOOLANT WITH PAPER FILTER SYSTEM
20 HORSEPOWER WHEELHEAD MOTOR
3 HORSEPOWER HYDRAULIC DRIVE MOTOR
1 HORSEPOWER WORKHEAD MOTOR |
|
Ad # 15603 | Cylindrical Grinders (O.D. & I.D.) |
1950 |
Cincinnati |
|
Good |
sold |
Photo /
More Info. |
14" X 36": Cicinnati ID OD grinder all attachments under
power.
14 x 36" |
|
Ad # 7656 | Cylindrical Grinders (O.D. & I.D.) |
1946 |
CINCINNATI |
|
Good |
Sold |
Photo /
More Info. |
14´´ X 36´´ CINCINNATI PLAIN CYLINDRICAL GRINDER: 14´´ X 36´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
SWING OVER TABLE ................... 14-1/4´´
MAXIMUM DISTANCE BETWEEN CENTERS ... 37´´
WORKHEAD SPEEDS .................... 40 TO 160 RPM
TABLE FEEDS ........................ (24) 3-1/2 to 120 IPM
AUTO INFEED AT TABLE REVERSAL
STANDARD GRINDING WHEEL ............ 30´´ DIAMETER X 3´´ FACE
RAPID TRAVERSE OF WORK HEAD ........ 16 IPR
COOLANT
20 HORSEPOWER MAIN MOTOR
1 HORSEPOWER/VARIABLE SPEED WORKHEAD MOTOR |
|
Ad # 7659 | Cylindrical Grinders (O.D. & I.D.) |
1956 |
CINCINNATI |
ER |
Good |
Sold |
Photo /
More Info. |
12´´ X 36´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER: 12´´ X 36´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
SWING OVER BED ....................... 12-1/2´´
MAXIMUM CENTER DISTANCE .............. 36´´
HYDRAULIC TABLE FEED ................. 3 TO 240 IPM
PICK FEED AT TABLE REVERSE
VARIABLE SPEED WORKHEAD
WHEEL SIZE ........................... 12´´ X 1´´ X 6´´
COOLANT
3 HORSEPOWER WHEELHEAD MOTOR
1 HORSEPOWER HYDRAULIC MOTOR |
|
Ad # 4913 | Cylindrical Grinders (O.D. & I.D.) |
|
Cincinnati |
5U4D5SN-1 |
Good |
SOLD |
Photo /
More Info. |
Universal (ID/OD) Cylindrical Grinder: Just Arrived!!! More information to follow |
|
Ad # 14268 | Cylindrical Grinders (O.D. & I.D.) |
1965 |
Cincinnati |
DE |
Good |
sold |
Photo /
More Info. |
OD only :grinder 18" x 48": Cincinnati Model DE :OD only Grinder
Rebuilt 1986 original machine
1965
18" x 48" Travel
14" x 2" wide Wheel
Indexing Grinder Head
Power Cross Feed
|
|
Ad # 11644 | Cylindrical Grinders (O.D. & I.D.) |
? |
Cincinnati Milacron |
? |
Very Good |
sold |
Photo /
More Info. |
14" x 36" OD grinder: Cincinnati Milacron Universal Hydraulic
OD/ID
14" x 36"
14" Grinding wheel Max OD
10" Magnetic Chuck face chuck
4 Jaw 10" Chuck (not Shown) |
|
Ad # 2483 | Cylindrical Grinders (O.D. & I.D.) |
50's |
CINCINNATI SENDZIMIR |
LR |
Good |
Sold |
No Photo /
More Info. |
14” X 72” CINCINNATI SENDZIMIR CNC ROLL GRINDER: Swing Over Bed: 15 ½”
Max. Roll Length: 102 ½”
Max. Roll Weight: 6500 Lbs.
Workhead Type: Dead
Workhead Speeds, Programmable: 0-300 rpm
Max. Grinding Wheel Size: 24” x 2” x 12” Standard
CNC System: KPM 5
Infeed Screw: Ballscrew
Footstock Type Handwheel
Footstock Center: #13 B&S
rebuilt 90-91
|
|
Ad # 6149 | Cylindrical Grinders (O.D. & I.D.) |
1970 |
CINCINNATI-HEALD |
273A |
Good |
Sold |
Photo /
More Info. |
# 273A CINCINNATI-HEALD Universal Internal Grinder: Max. swing over table extension w/o guard 24 ½”
Max. swing inside guard 28”
Swing, work-head swiveled 90° 12”
Angular adjustment of work-head 90°
Work-head cross-slide travel 1 ½”
Distance work-head flange to edge of wheel slide 0-29 1/16”
Table speeds for grinding 0-18 FPM
Variable work-head speeds 50-500 RPM
Rapid traverse table 18 FPM
One turn of cross feed hand-wheel .050” on dia.
Cross feed in increments, at one or both ends of
table stroke .0001”-.0005” on dia.
Minimum stroke .125”
One turn of work-slide hand-wheel .100”
One turn of table hand-wheel 3 ¾”
EQUIPPED WITH:
Hydraulic unit
Coolant tank w/ pump
12,000 RPM Heald Red Head Spindle
Auto. Lub. System
TRAK 101 1-axis D.R.O.
12” Dia. 3-jaw universal chuck
Work light
Chuck guard
1 ½ H.P. work-head drive motor
5 H.P. wheel-head drive motor |
|
Ad # 6688 | Cylindrical Grinders (O.D. & I.D.) |
1979 |
CINCINNATI-MILACRON |
|
Excellent |
Sold |
Photo /
More Info. |
10"x48"cc CINCINNATI-MILACRON Universal Hydraulic Cylindrical Grinder: 10" x 48"cc CINCINNATI-MILACRON Universal Hydraulic Cylindrical Grinder wit... |
|
Ad # 11657 | Cylindrical Grinders (O.D. & I.D.) |
1960s |
cinncinati |
14" x 72" |
Very Good |
sold |
Photo /
More Info. |
14" x 72" Angle Head Grinder: Cinncinati 30 Degree Angle Head Grinder
30" Diameter Wheel
14" Swing over Table
72" Between Centers
Semi-automatic
|
|
Ad # 8056 | Cylindrical Grinders (O.D. & I.D.) |
70'S ? |
CRYSTAL LAKE |
608 |
Very Good |
sold |
Photo /
More Info. |
6" SWING, 10" BETWEEN CENTERS: THIS IS A VINTAGE, BELT DRIVEN MACHINE THAT
STILL PERFORMS LIKE NEW. SEPARATE BELTS AND
MOTORS DRIVE THE THE GRINDING WHEEL AND
THE WORKPIECE. THE WORKPIECE SPEED IS
VARIABLE. LUBRICATION IS WITH "OIL POTS".
THIS MACHINE IS STILL POWERED UP AND
OCCASIONALLY IS USED FOR PRODUCTION.
Ultra tight Tolerance - 0.0001 no problem
yes has positive stop on the slide
7" std wheel included
6" swing x 10" centers
free standing
coolant
all guarding
no collets
no manuals |
|
Ad # 13355 | Cylindrical Grinders (O.D. & I.D.) |
1971 |
Danobat |
RE H 500 |
Good |
sold |
Photo /
More Info. |
OD/ID-6" x 18": Danobat ID / OD Grinder
Model RE H 500
auto hyd.Left & Right feed, manual in/out feed
Travels 6" x 18"
New Allen Bradley Control-vari speed inverter
Max wheel Size 12" on a 3" arbor
3 Jaw 6" Chuck
220/3 Volts
new coolant tank & pump
ID spindle needs a new bearings, OD spindle-ok
hyd cylinders rebuilt recently-table feed
new electrical push buttons installed recently |
|
Ad # 11330 | Cylindrical Grinders (O.D. & I.D.) |
90's ? |
Enprotech/CCI |
G10-20 |
Very Good |
sold |
Photo /
More Info. |
10 x 20 OD: Used OD Grinder ENproteck/CCI G10-20
10"Dia x 20" length
50-300 RPM
5 HP
coolant tank w paper filter
uses half dead carbide centers
NO ID spindle but has drop down attach arm for one to be mounted
Wheel: 14 x 1.5"
DRO-on infeed
ways look great--little use on machine
no manuals
some tooling |
|
Ad # 2485 | Cylindrical Grinders (O.D. & I.D.) |
1967 |
FARREL |
|
Very Good |
sold |
Photo /
More Info. |
REBUILT FARREL TWO WHEEL ROLL GRINDER : Max. Roll Dia., on center with full size wheel 42” Solid 57"
Max. Roll Dia., above centerline (11”) 63" 78"
Min. Roll Dia., ground on centerline 8" 12"
Nominal Roll Face ground 316"
Max. Carriage traverse 340" up to 700"
Max. Crown/Concavity of roll unlimited
Max. weight of roll supported by bed 90 Ton
Work speeds, rpm, programmable .2 – 35 rpm
Work Motor, Baldor AC Vector, with dynamic braking 60 hp, 1180/3600 RPM
Feedback GE/Fanuc encoder
Grinding Wheel Dia., std. 20”
Grinding Wheel Face, std. 3”
Spindle speed range, bi-directional, programmable 233 – 1400 rpm
Grinding wheel motors, Baldor AC Vector 30 hp, 1180/3600 rpm
|
|
Ad # 9385 | Cylindrical Grinders (O.D. & I.D.) |
|
Farrel |
OD Grinder |
Good |
sold |
Photo /
More Info. |
TRAVELING-HEAD SWING REST ROLL GRINDER, 48"/56" X 378"/440" : FARREL TWO-WHEEL TRAVELING-HEAD SWING REST ROLL GRINDER, 48"/56" X 378"/440... |
|
Ad # 2459 | Cylindrical Grinders (O.D. & I.D.) |
1965 |
FARREL |
|
Needs Work |
sold |
No Photo /
More Info. |
REBUILT FARREL TWO WHEEL ROLL GRINDER: Max. Roll Dia., on center with full size wheel 48” Solid
Max. Roll Dia., above centerline 60”
Min. Roll Dia., ground on centerline 8”
Max. Roll Face ground 280”
Max. Carriage traverse 305”
Max. Crown/Concavity of roll .400”
Headstock:
Work speeds, rpm, programmable 4 – 24rpm
Work Motor, GE D.C. 20 hp, 400/1600 RPM
D.C. Drive Allen Bradley 1395
Wheelheads:
Grinding Wheel Dia., std. 20”
Grinding Wheel Face, std. 3”
Spindle speed range, bi-directional, programmable 700 – 1400 rpm
Grinding wheel motors, GE D.C. 15 hp
D.C. Drives Allen Bradley 1395
Carriage:
Carriage Speed 2 - 60 ipm
Carriage Motor 3 hp D.C.
D.C. Drive Allen Bradley 1395
Traverse screw diameter 4 5/8”
Carriage Ways, center to center 66”
Over all width of each way 7 ¾”
Over all length of carriage 88”
|
|
Ad # 2487 | Cylindrical Grinders (O.D. & I.D.) |
1966 |
FARREL- GIUSTINA |
|
Very Good |
SOLD |
Photo /
More Info. |
REBUILT FARREL- GIUSTINA TWO WHEEL ROLL GRINDER : Max. Roll Dia., on center w/ full size wheel 50” Solid
Max. Roll Dia., above centerline (11”) 63”,
Min. Roll Dia., ground on centerline 8”
Nominal Roll Face ground 367”
Max. Carriage traverse 390”, Optional up to 700”
Max. Crown/Concavity of roll unlimited
Max. weight of roll supported by bed 90 ton
Work speeds, rpm, programmable .2 – 35 rpm
Work Motor, Baldor AC Vector, with dynamic braking 60 hp, 1180/3600 RPM
Feedback GE/Fanuc encoder
Grinding Wheel Dia., std. 20”
Grinding Wheel Face, std. 3”
Spindle speed range, bi-directional, programmable 233–1400 rpm
Grinding wheel motors, Baldor AC Vector 30 hp, 1180/3600 rpm
Carriage Speed, programmable 0–80 ipm
Carriage Motor, GE/Fanuc Servo 7.3 kW 2000 rpm
Carriage Gearbox, Cone Textron 25:1
Over all width of each way 7 ¾”
Over all length of carriage 88”
|
|
Ad # 9144 | Cylindrical Grinders (O.D. & I.D.) |
87 reman |
Heald |
OG/271 toolroom |
Good |
sold |
Photo /
More Info. |
ID grinder 20 x 20": 20 x 20 capacity
12" 4 jaw chuck
Univ swivel head
speed adj
10 HP0G6606 GRINDERS, INTERNAL
MODEL #271 HEALD INTERNAL GRINDER
EQUIPPED WITH:
Power Draw Bar Wheel Guard Cover For Head
Hydraulic Tank Power Feed On End Table
Feed Box Spindle Motor
Speed Vari=Drive Motor on Work Spindle Coolant Tank
Cash Head Conjugate Sine Bar
CATALOG SPECIFICATIONS: std specs verify
Swing Over Table (Straight Work), Diameter .... 18"
Swing Inside Standard Chuck Guard, Diameter ... 12"
Hole Length Ground, Maximum ................... 5"
Hole Diameter Ground .......................... 1/8" - 5-1/2"
Included Angle Taper, Maximum ................. 60 degree
Grinding Speed ................................ 0 - 20 FPM
Rapid Traverse ................................ 35 FPM
Workhead Speeds ............................... 400, 266, 200, 133 RPM
Floor Space W/Coolant Tank .................... 93" x 85"
Net Weight, Approximate ....................... 7400 lbs.
|
|
Ad # 7151 | Cylindrical Grinders (O.D. & I.D.) |
1957 ? |
Heald |
271 Tool Room |
Excellent |
sold |
Photo /
More Info. |
Heald 271 ID Grinder with Extra ID Spindles : Swing: 22"
Grinding Capacity: 12" x 5"
not universal or tilting head type
chuck has a fine adjust base screw for a taper adjustment
auto feeds both directions w/miltiple stops
chuck:12" 4 jaw
coolant external tank 10 gallon
spindle bore: 3" thru hole in chuck, machine has 2" dia bore-approx 15" deep down to 1" bore out back end
Includes: Two (2) Red Head ID spindles (one is a 14,000 rpm)
Price includes:
All Documents, Spares Package of misc. parts, drive belts and numerous ID grinding wheels
NOTE: Bought from Government Surplus - hardly used at all! |
|
Ad # 10465 | Cylindrical Grinders (O.D. & I.D.) |
|
Heald |
273A |
Good |
Sold |
Photo /
More Info. |
Heald Model Internal Grinder : HEALD INTERNAL GRINDER
Model: 273A S/N 62549
Maximum Swing Inside Table 24.5"
Swing Inside Standard Chuck Guard 20"
Swing W/ Workhead at 90 Degree 13"
Bore Length Ground, Maximum 16"
Grinding Stroke, Minimum .125"
Grinding Stroke, Maximum 16"
Table Longitudinal Travel 20"
Wheelhead Cross-Slide Travel 1.5"
Workhead Positioning Slide Travel 17.5"
Workhead Swivel Angle, Maximum 90 Degree
Grinding Spindle Speeds, Range 0-500 RPM
Grinding Table Speeds, Infinite Variable 0-18 FPM
Power Rapid Table Traverse 18 FPM
5 HP 3500 RPM Grinding Spindle Motor
1.5 HP 3600 RPM Workhead Chuck Motor
0.5 HP Hydraulic Motor
|
|
Ad # 5260 | Cylindrical Grinders (O.D. & I.D.) |
|
Heald |
75-A |
Good |
sold |
Photo /
More Info. |
Heald ID Grinder: 9" Magnetic Chuck
1" Arbor
Chuck speed 550-1740 rpm
|
|
Ad # 10464 | Cylindrical Grinders (O.D. & I.D.) |
1978 |
Heald/Cincinnati |
272 "SIZEMATIC" |
Good |
Sold |
Photo /
More Info. |
Heald/Cincinnati Milacron 272 SISEMATIC, INTERNAL GRINDER: HEALD/CINCINNATI MILACRON
MODEL #272 "SIZEMATIC" S/N 60895 NEW: 1978
INTERNAL GRINDER
CATALOGUE SPECIFICATIONS:
Swing Over Table, Maximum 18"
Bore Diameter Ground, Minimum .125"
Bore Diameter Ground, Maximum 5.5"
Bore Length Ground, Maximum 12"
Table Longitudinal Travel 30"
Hole Thru Workhead Spindle, Diameter 1.59"
Grinding Angle, Maximum Included 60-DEGREES
Workhead Spindle Speeds, Range 133 TO 400 RPM
Grinding Table Speed, Infinite 0 TO 20 FPM
Power Rapid Table Traverse 35 FPM
Wheel Wear Compensation, Range 0 TO .004"
Power Cross Feed On Diameter, Max .042"
Grinding Spindle Motor, Horsepower 5 HP/3500 RPM
Workhead Chuck Motor, Horsepower 3/2/1.5/1
Workhead Chuck Motor, RPM 1770/1175/885/575
Electrical System 440/3/60
Overall Dimensions, W X D 11' X 7'
Overall Height 7'
Weight, Approximately 8000 LBS
|
|
Ad # 12715 | Cylindrical Grinders (O.D. & I.D.) |
|
Jack Mill |
|
Fair |
sold |
Photo /
More Info. |
8 x 36: Lots of tooling
8 x 36"
OD & ID spindles
hyd..are fair..but work... |
|
Ad # 9222 | Cylindrical Grinders (O.D. & I.D.) |
96 |
Jackmill |
JMAC600CNC |
Very Good |
Sold |
Photo /
More Info. |
angular cnc OD 10.2" swing x 23.6": Fanuc 21I-TB control
Rs232 # JMA-C-600/ENC2N
coolant and paper filter
w/ parts gaging sys
includes trasformer
CNC CYLINDRICAL GRINDER
(ANGULAR TYPE)
JMAC-600 CNC-2N std specs verify below
Capacity Distance between Centers M.M. 600
Max. Grinding Diameter M.M. Ø260
Work Table Travel per Handwheel Rotation M.M./REV 0.1,1,10
Workhead
& Tailstock Workhead Work Center Taper M.T. NO.4
Tailstock Work Center Taper M.T. NO.4
Workhead Spindle Speed R.P.M 50-600
Wheelhead Grinding Wheel Size (OD.x Width x ID.) M.M. Ø405x50xØ127 ??
Grinding Wheel Swivel ±30°
Shipping Dimension C.M. 220x200x180
Net Weight KGS 2500
|
|
Ad # 6664 | Cylindrical Grinders (O.D. & I.D.) |
1976 |
JONES & SHIPMAN |
1311 |
Excellent |
sold |
Photo /
More Info. |
10” x 18”cc JONES & SHIPMAN universal cylindrical grinder, Model 1311: 10” x 18”cc JONES & SHIPMAN universal cylindrical grinder, Model 1311
Maximum diameter ground with new wheel 10”
Maximum grinding length between centers 18”
Maximum workpiece weight between centers 220 lbs.
Table traverse per handwheel revolution 5”
Table traverse fine feed graduations 0.50”
Table traverse steplessly variable per minute 0.0005”
Minimum table stroke under hydraulic control 0.040”
Table swivel adjustment-included angle clockwise/
included angle anti-clockwise 19°/20°
Infeed rate at table reversal, reduction in work diameter 0.0002”-0.0012”
Wheelhead feed handwheel-rapid/standard feed 0.250”/0.50”
per revolution, reduction in work diameter
(6) workhead speeds 40-320 RPM
Workhead swivel, clockwise/counter-clockwise 15°/90°
Workhead and tailstock spindle center taper #3 Morse
Standard grinding wheel (Type EIU wheelhead) 14” diameter x 1” wide x 5”
bore
(2) wheelhead speeds 2,000 & 2,680 RPM
Wheelhead swivel adjustment each side or normal
position 180°
Cross traverse of wheelhead 8-1/16”
EQUIPPED WITH:
Manually operated or hydraulically actuated table traverse
Manually operated, automatic intermittent (at table reversal) and automatic continuous (plunge grinding) modes of wheelhead infeed
Rapid wheelhead advance and retraction
Swing-around internal grinding attachment with spindle
¾ H.P. 3/60/220-440 volt motorized workhead with 6” diameter 4-jaw chuck, 6 ¼” diameter magnetic chuck, and combination live/dead center
Tailstock with assorted full and half centers
(1) 5/16”-3” diameter capacity 3-point plain-type steady rest
(1) 5/16”-3” diameter capacity 2-point open-type steady rest
Table mounted diamond holder for dressing wheel
Self-contained hydraulic system with 1 H.P. motor
External coolant pump and tank
Manually operated 1-shot lubrication system
5.5 H.P. 3/60/220-440 volt wheelhead motor and electrical controls |
|
Ad # 6614 | Cylindrical Grinders (O.D. & I.D.) |
|
JONES & SHIPMAN |
1314 |
Very Good |
sold |
Photo /
More Info. |
8" X 24" JONES & SHIPMAN MODEL 1314 HYD UNIVERSAL CYLINDRICAL GRINDER: 8" X 24" JONES & SHIPMAN MODEL 1314 TOOLROOM
HYDRAULIC UNIVERSAL CYLINDRICAL GRINDER
MAXIMUM DIAMETER GROUND: 8"
GRINDING LENGTH BETWEEN CENTERS: 24"
HYDRAULIC TABLE SPEEDS: 3 TO 144 IPM
FEED RATES: 0.0002" TO 0.0012"
WHEEL SIZE: 8" X 3/4" X 1-1/4"
WHEELHEAD CROSS TRAVEL: 6"
WORKHEAD SPEEDS: (6) 36 TO 500 RPM
WHEELHEAD SPEEDS: (4) 2800 TO 4180 RPM
EQUIPPED WITH:
RISE & FALL WHEELHEAD
SWIVEL TABLE
SWIVEL WHEELHEAD
COOLANT TANK & PUMP
ONE-SHOT LUBRICATION
TAILSTOCK |
|
Ad # 1555 | Cylindrical Grinders (O.D. & I.D.) |
1996 |
Jones & Shipman |
Format 15-700 Universal |
Good |
sold |
No Photo /
More Info. |
CNC Universal OD/ID Grinder: Control: Allen Bradley 8600/CRT
Capacity: Swing 9.85 "
Distance Between Centers 27.58 "
Swivel of Table 10/18 Degrees
Grinding Wheel: Diameter 17.73 " Width 1.379 "
|
|
Ad # 5563 | Cylindrical Grinders (O.D. & I.D.) |
|
JONES & SHIPMAN |
1070 |
Good |
Sold |
Photo /
More Info. |
12" x 6" Plain OD Grinder: 12" x 6" Plain OD Grinder
Swing: 10 "
6" Swing 12" Centers Jones & Shipman 1070 OD GRINDER, 10" WHEEL, HYD. TABLE/AUTO INFEED/PLUNGE/RAPID
6" Od Grinder, Jones & Shipman 1070 10" Wheel, Hyd. Table/Auto Infeed/Plunge/Rapid
Std Specs Below-please verify
6" X 12" JONES & SHIPMAN (MADE IN U.K.)
SUPER-PRECISION" PLAIN CYLINDRICAL GRINDER
MODEL:1070
MAXIMUM SWING ..................................... 6"
DISTANCE BETWEEN CENTERS .......................... 12"
TABLE SWIVEL INCLUDED ANGLE:
CLOCKWISE ................................ 20 DEGREES
COUNTERCLOCKWISE ......................... 20 DEGREES
LONGITUDINAL TABLE SPEED (HYDRAULIC) ... 3" TO 240" IPM
ONE REVOLUTION OF HANDWHEEL ...................... 3/4"
FINE FEED KNOB GRADUATIONS .................... 0.0005"
WHEELHEAD:
TRAVERSE ON SCREW (MAX.) ........................... 3"
POWER RAPID ADVANCE/RETRACTION STROKE .............. 1"
CROSS FEED HANDWHEEL GRAD. .................... 0.0002"
ONE DEPRESSION OF FINE FEED LEVER KNOB ........ 0.0001"
AUTO INFEED @ TABLE REVERSALS ...... 0.0001" TO 0.0006"
FEED @ REVERSAL OF TABLE,
REDUCTION IN DIAMETER .............. 0.000002" TO .002"
CONTINUOUS (PLUNGE) INFEED RATE ..... 0.0001" TO .0006"
(PLUNGE) REDUCTION IN DIA. FROM ... 0.004" TO .072" IPM
MAX. RANGE OF PLUNGE INFEED ... 0.8 REV. OF THE HANDWHEEL
WHEELHEAD SLIDE ADJUSTMENT ....................... 7"
SWIVEL OF WHEELHEAD ............. 8 DEGREES (CLOCKWISE)
WHEEL SIZE .............................. 10" X 1" X 3"
WHEEL SPEEDS (2) .................... 2,120 & 2,500 RPM
WHEELHEAD MOTOR ................................ 2.0 HP
WORKHEAD SPINDLE SPEEDS, INF. VARIABLE ... 75 TO 750 RPM
WORKHEAD & TAILSTOCK SPINDLE TAPERS .............. #1MT
APPROX. FLOOR SPACE REQUIRED ................ 66" X 40"
APPROX. MACHINE WEIGHT ...................... 3,360 LBS
HYDRAULIC OPERATION FEATURING:
- POWER TABLE TRAVERSE
- AUTO INFEED
- DUAL RATE (COARSE/FINE) PLUNGE (CONTINUOUS) INFEED
W/DUAL RATE PLUNGE INDICATOR FEED SELECTOR
- POWER RAPID WHEELHEAD ADVANCE & RETRACTION
SPARKOUT TIMER (0 TO 30 SECONDS)FOR AUTO INFEED
& PLUNGE CYCLES
FINE FEED MECHANISM FOR INFEED OF WHEELHEAD
FINE FEED KNOB FOR TABLE TRAVERSE
DUAL LIVE/DEAD WORKHEAD SPINDLE W/INFINITELY
VARIABLE SPINDLE SPEEDS
WORKHEAD SWIVELS
COOLANT SYSTEM
5" 3-JAW CHUCK
WORK LIGHT
3 H.P. WHEELHEAD MOTOR
3/60/220-440 VOLT ELECTRICS
|
|
Ad # 1589 | Cylindrical Grinders (O.D. & I.D.) |
1958 |
Jones & Shipman |
# 1300 |
Good |
sold |
Photo /
More Info. |
Jones & Shipman OD/ID Grinder: swing type universal ID spindle on head |
|
Ad # 1795 | Cylindrical Grinders (O.D. & I.D.) |
1999 |
Junker |
BUAJ-30CNC |
Excellent |
SOLD |
Photo /
More Info. |
36" x 12" CNC Junker O.D. Grinder: Control; Fanuc O-GC
DBC: 36"
universal type
Max Swing 12"
Auto Dresser
Hydraulic Tailstock
Coolant Separator (Paper filter)
Mist collector
Wheel: 14" dia x 1 1/2"
Part locator |
|
Ad # 7279 | Cylindrical Grinders (O.D. & I.D.) |
1973 |
KARSTENS |
A |
Excellent |
Sold |
Photo /
More Info. |
12"x 16"cc Model A KARSTENS Hydraulic Universal Grinder: 12"x 16"cc Model A KARSTENS Hydraulic Universal Grinder
Maximum swing: 11.81"
Maximum work between centers: 15.75"
Maximum wheel diameter: 15.75" x 5" diameter hole
Maximum width of wheel: 3.837"
Infinitely variable work head speeds: 30 to 450 RPM
Swivel table graduated to a maximum angle: 11 1/2 º
Maximum work piece weight between centers: 220 Lbs.
Maximum work piece weight chucking: 110 Lbs.
Infinitely variable infeed range: .00004" - .001"
Hydraulic table traverse infinitely variable: up to 236 IPM
Minimum table stroke: 1/32"
Spindle speeds: 1600/2000 RPM
Work head taper hole in spindle: No. 5 M.T.
Spindle bore: 1 ?"
Tail stock taper hole: No. 4 M.T.
Plunge grinding speed: .002 to .157 IPM
Total infeed travel of hand wheel: 3 5/32"
Swivel of work head: 90º
EQUIPPED WITH: Hydraulic operation
Swivel work head
Swivel wheel head
Swivel table
Variable work head speeds
Plunge feed
Pick feed
Fine and compensating feed control
(2) Wheel mounts
(1) New grinding wheel
.44/.89 H.P. Variable speed work head drive
5.4 H.P., 1420 RPM wheel drive motor |
|
Ad # 13135 | Cylindrical Grinders (O.D. & I.D.) |
1981 |
KELLENBERGER |
1000U |
Excellent |
sold |
Photo /
More Info. |
EXCELLENT ID/OD KELLENBERGER 39 3/8 BETWEEN CENTERS: Kellenberger 1000U OD/ID GRINDER,
18" Swing 40" Centers
Specifications:
Distance between centers 39-3/8"
Distance between centers w/ tailstock overhanging47.25"
Height of centers5"
Swing10"
Table longitudinal travel51-13/16"
Longitudinal travel per turn of handwheel25/32"
Table speed (hydraulic_.6-240 ipm
Table swivel9 degrees
Reversing dwell0-5 seconds
Grinding wheel infeed, 1 grad of feed scale.0002"
Grinding wheel infeed, auto feed max.036"
Grinding wheel infeed, infeed for plunge grind.00004" to .002"
Grinding wheel infeed, micrometer stop, 1 grad.00005"
Transverse movement of wheel slide11.25"
Hydraulic rapid wheel slide advance/retract stroke1-37/64"
Grinding wheel speeds (4)1500/1700/2200/3600 rpm
Grinding wheel for cylindrical grinding16" x 2" x 5"
Grinding wheel (surface grinding(10" x 3/4" x 3"
Swivel of grinding head270 degrees
Vertical motion of grinding spindle head4-59/64" to 13-35/32"
Workhead variable speeds10-400 rpm
Workhead swivels360 degrees
Workhead spindle taperMT5
Appx floor space required106" x 64" x 66"H
Machine weight (appx)6,500 lbs
Equipped With:
ID spindle included
COOLANT SYSTEM
4 HP WHEEL HEAD MOTOR
MARPOSS IN-PROCESS GAUGING SYSTEM
MT.5 TAPER MOUNT FACEPLATE
1) STANDARD TAIL MOUNTED DIAMOND WHEEL DRESSER
1) SWIVELLING DERSSER WITH MICROMETER ADJUSTMENT FOR EXTERNAL AND INTERNAL GRINDING
1) RADIUS DRESSER, TABLE MOUNTED, FOR CONVEX AND CONCAVE RADII
1) WHEEL HUB FOR 16" WHEELS
1) WHEEL HUB FOR 10" FACE GRINDING WHEELS
1) SWING AROUND ID ATTACHMENT, FACTORY MOUNTED ID BLOCK
1) ID SPINDLE, 12,500 RPM
HYDRAULIC TAILSTOCK
(2) SUPPORT REST
VARIABLE SPEED WORKHEAD
SWING AROUND I.D.,
FULL AUTO CYCLE, with ACCESSORIES:chuck, steady rest
EXCELLENT ID/OD
KELLENBERGER 39 3/8 BETWEEN CENTERS
was rebuilt by Rohner machine in CA |
|
Ad # 9382 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
1R |
Good |
sold |
Photo /
More Info. |
6" X 18" : 6" X 18" LANDIS MODEL 1R, Ltr R PLAIN
CYLINDERICAL GRINDER
Swing Over Table, Nominal 6"
Max grinding diameter 6.875"
Distance beyween centers, Nominal 18"
Grinding wheel diameter, standard 16"
Grinding wheel diameter, Max 3"
Grinding wheel hole diameter 5"
Table swivel taper 4 IPF"
Table swing angle 20 degrees
Table longitudinal feeds, infinite 2 to 240 IPM
Hydraulic Longitudinal Table Feed
Hydraulic Grinding Wheel Infeed
1/4 HP Workhead
Bijur One Shot Lubrication System
Coolant System (Tank & Pump)
|
|
Ad # 10172 | Cylindrical Grinders (O.D. & I.D.) |
60's |
Landis |
|
Very Good |
Sold |
Photo /
More Info. |
16 X 96: 16" swing x 96"
This machine is in excellent running condition.
Wheel : 24"
Swing: 16"
Distance between the centers: 96"
Approx Weight: 33,000 lbs |
|
Ad # 7683 | Cylindrical Grinders (O.D. & I.D.) |
|
LANDIS |
3RH |
Very Good |
Sold |
Photo /
More Info. |
24´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER : 24´´ X 96´´ LANDIS UNIVERSAL CYLINDRICAL GRINDER
NOMINAL GRINDING CAPACITY ........ 24´´ X 96´´
ACTUAL SWING OVER TABLE .......... 25-1/2´´
GRINDING WHEEL SIZE .............. 14´´ X 1-1/2´´ X 5´´
GRINDING WHEEL SPEEDS ............ (2) 1720 & 2185 RPM
INTERNAL SPINDLE SPEED ........... 15000 RPM
TABLE TRAVERSE SPEED (VARIABLE) .. 2 TO 240 IPM
WORKHEAD SPEEDS (VARIABLE) ....... 12 TO 360 RPM
WORKHEAD / WHEELHEAD / TABLE ..... SWIVEL
WORKHEAD SPINDLE ................. LIVE OR DEAD
INFEED ........................... AUTOMATIC
CHUCK ............................ 18´´ 4-JAW
I.D. SPINDLE ..................... BOLT-ON TYPE
LUBE SYSTEM ...................... BIJUR
COOLANT .......................... YES
WORKHEAD MOTOR ................... 1 HORSEPOWER
HYDRAULIC MOTOR .................. 2 HORSEPOWER
WHEELHEAD/I.D SPINDLE MOTOR ...... 10 HORSEPOWER |
|
Ad # 5179 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
767/1 R-Universal |
Good |
sold |
Photo /
More Info. |
14" x 30" Landis OD Grinder: Landis 767/1 R-Universal grinder
Swing: 14"
Distance Between Centers: 30"
Wheel Diam. 14"
NOTE: ID attachment on machine without ID spindle |
|
Ad # 15743 | Cylindrical Grinders (O.D. & I.D.) |
1964 |
landis |
2R plain OD |
Good |
sold |
Photo /
More Info. |
2R 6 x 30 capacity: 1964 landis #2R OD plain cylindrical grinder
6 by 30 inch working capacity
new 1964 built in usa at landis tool company
facility waynesboro pennsylvania
located in
binghamton, new york |
|
Ad # 1257 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
Type E |
Fair |
Sold |
Photo /
More Info. |
OD Grinder 14" x 35 Universal head: 14" x 35" Capacity
Universal Head
US Variable speed drive |
|
Ad # 3733 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
CH 12x36 |
Fair |
Sold |
Photo /
More Info. |
UNIVERSAL ID/OD GRINDER: |
|
Ad # 7134 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
26 x 50 OD Grinder |
Fair |
sold |
Photo /
More Info. |
26" x 50" OD Landis Grinder : Swing: 26"
DBC: 50"
Diameter of grinding wheel: 28" |
|
Ad # 9171 | Cylindrical Grinders (O.D. & I.D.) |
1950's ? |
Landis |
374-6 |
Good |
sold |
Photo /
More Info. |
ID & OD :12 x 28 uninersal: ID & OD Grinder-Univ & tool grinder
Head has ID acc-universal
12" x 28"
dresser universal
Hibco head-sold seperatly-for 2K
digital readout
manual
|
|
Ad # 10165 | Cylindrical Grinders (O.D. & I.D.) |
|
Landis |
14x36 |
Good |
Sold |
Photo /
More Info. |
14x36 OD grinder: 14swing x 36centers
1-1/2x14 wheels
3 new wheels with machine
7.5hp spindle
power feed all axis |
|